MIBs Depot

ENTERASYS-IMAGE-VALIDATION-MIB

Registered at
1.3.6.1.4.1.5624.1.2.47
Last updated
2004-04-02 21:34
Organization
Enterasys Networks
Revisions
2004-04-02 21:34
Namespace
enterasys
Source file
ENTERASYS-IMAGE-VALIDATION-MIB
Digest
sha256:5539d019389b10195a1aa4ec02e983802979a86991907c14a1771066345fe889

Description

This MIB module defines a portion of the SNMP MIB under Enterasys Networks' enterprise OID pertaining to new image validation and recovery.

Contact

Postal: Enterasys Networks 50 Minuteman Rd. Andover, MA 01810-1008 USA Phone: +1 978 684 1000 E-mail: support@enterasys.com WWW: http://www.enterasys.com

Imports

FromSymbols
ENTERASYS-MIB-NAMESetsysModules
INET-ADDRESS-MIBInetAddress, InetAddressType
P-BRIDGE-MIBEnabledStatus
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
ENTERASYS-IMAGE-VALIDATION-MIB
ENTERASYS-MIB-NAMES
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
P-BRIDGE-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
etsysImageValidationObjects
OBJECT-IDENTITY
1.3.6.1.4.1.5624.1.2.47.1
etsysImageValidationConfig
OBJECT-IDENTITY
1.3.6.1.4.1.5624.1.2.47.1.1
etsysImageValidationEnable
OBJECT-TYPE
The enabled/disabled status of the New Image Validation feature.
1.3.6.1.4.1.5624.1.2.47.1.1.1EnabledStatusread-writecurrent
etsysImageValidationPeriod
OBJECT-TYPE
The maximum number of seconds to monitor the new image after it has booted. If any of the selected validation operations are not successfully completed within this interval, a reset will be issued to load the prior operational image.
1.3.6.1.4.1.5624.1.2.47.1.1.2Unsigned32read-writecurrent
etsysImageValidationOperations
OBJECT-TYPE
The operations that will be used to validate the new image during the etsysImageValidationPeriod. etsysImageValidationConfig - The successful loading of the start-up configuration. etsysImageValidationIcmp - The successful reception of an ICMP echo reply from the host specified in etsysImageValidationIcmpAddress. etsysImageValidationSnmp - The successful reception of an SNMP request from the host specified in etsysImageValidationSnmpAddress. If a host is not specified, an SNMP request from any host will be considered a success. If all of the selected validation operations are not successfully completed within the etsysImageValidationPeriod, a reset will be issued to load the prior operational image.
1.3.6.1.4.1.5624.1.2.47.1.1.3Bits {etsysImageValidationConfig(0), etsysImageValidationIcmp(1), etsysImageValidationSnmp(2)}read-writecurrent
etsysImageValidationIcmpAddressType
OBJECT-TYPE
The address type of the etsysImageValidationIcmpAddress object. These objects are used when the ICMP echo reply validation operation has been selected.
1.3.6.1.4.1.5624.1.2.47.1.1.4InetAddressTyperead-writecurrent
etsysImageValidationIcmpAddress
OBJECT-TYPE
The address of the host that should respond to the ICMP echo request. If an ICMP echo reply has NOT been received from this host by the end of the etsysImageValidationPeriod, a reset will be initiated to load the prior operational image.
1.3.6.1.4.1.5624.1.2.47.1.1.5InetAddressread-writecurrent
etsysImageValidationSnmpAddressType
OBJECT-TYPE
The address type of the etsysImageValidationSnmpAddress object. These objects are used when the SNMP request validation operation has been selected.
1.3.6.1.4.1.5624.1.2.47.1.1.6InetAddressTyperead-writecurrent
etsysImageValidationSnmpAddress
OBJECT-TYPE
The address of the host that we should receive an SNMP request from. If this object contains its default value then an SNMP request from any station will be considered a success. If an SNMP request has NOT been received from this host by the end of the etsysImageValidationPeriod, a reset will be initiated to load the prior operational image.
1.3.6.1.4.1.5624.1.2.47.1.1.7InetAddressread-writecurrent
etsysImageValidationConformance
OBJECT-IDENTITY
1.3.6.1.4.1.5624.1.2.47.2
etsysImageValidationGroups
OBJECT-IDENTITY
1.3.6.1.4.1.5624.1.2.47.2.1
etsysImageValidationCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.5624.1.2.47.2.2

Conformance

NameOIDStatus
etsysImageValidationConfigGroup
OBJECT-GROUP
Objects that provide a means to validate a new image.
1.3.6.1.4.1.5624.1.2.47.2.1.1current
etsysImageValidationCompliance
MODULE-COMPLIANCE
The compliance statement for entities which implement the Enterasys Image Validation MIB.
1.3.6.1.4.1.5624.1.2.47.2.2.1current