ENTERASYS-IETF-BRIDGE-MIB-EXT-MIB
- Registered at
- 1.3.6.1.4.1.5624.1.2.31
- Last updated
- 2007-07-31 18:19
- Organization
- Enterasys Networks, Inc
- Revisions
- 2007-07-31 18:19, 2007-03-21 21:02, 2006-11-09 16:37, 2006-10-04 19:51, 2004-11-04 14:47, 2004-05-28 15:08, 2004-04-08 20:04, 2004-03-04 19:39, 2004-03-01 22:29, 2003-11-14 18:31, 2003-06-19 19:36, 2002-12-13 21:20
- Namespace
- enterasys
- Source file
ENTERASYS-IETF-BRIDGE-MIB-EXT-MIB- Digest
sha256:526b1ef16eebfa6c77464f820f6cd2a2c2945129239ef08e27808f3f81638e46
Description
This MIB module defines a portion of the SNMP enterprise MIBs under Enterasys Networks' enterprise OID pertaining to proprietary extensions to the IETF BRIDGE-MIB as specified in RFC1493.
Contact
Postal: Enterasys Networks 50 Minuteman Rd. Andover, MA 01810-1008 USA Phone: +1 978 684 1000 E-mail: support@enterasys.com WWW: http://www.enterasys.com
Imports
| From | Symbols |
|---|---|
| BRIDGE-MIB | dot1dBaseBridgeAddress, dot1dBasePort, dot1dBasePortEntry, dot1dBasePortIfIndex, dot1dStpDesignatedRoot, dot1dStpPort, dot1dStpPortEntry |
| ENTERASYS-MIB-NAMES | etsysModules |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | dot1qTpFdbPort |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BRIDGE-MIB ENTERASYS-IETF-BRIDGE-MIB-EXT-MIB ENTERASYS-MIB-NAMES IANAifType-MIB IF-MIB P-BRIDGE-MIB Q-BRIDGE-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| etsysIetfBridgeMibExt OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.31.1 | |||
| etsysIetfBridgeDot1Notifications OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.31.1.0 | |||
| etsysIetfBridgeDot1dStp OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.31.1.1 | |||
| etsysIetfBridgeDot1dStpPortTable OBJECT-TYPE Extensions to the table that contains port-specific information for the Spanning Tree Protocol. | 1.3.6.1.4.1.5624.1.2.31.1.1.1 | not-accessible | current | |
| etsysIetfBridgeDot1dStpPortEntry OBJECT-TYPE A list of extensions to the information maintained by every port about the Spanning Tree Protocol state for that port. | 1.3.6.1.4.1.5624.1.2.31.1.1.1.1 | not-accessible | current | |
| etsysIetfBridgeDot1dStpPortStpEnable OBJECT-TYPE The enabled/disabled status of the Spanning Tree protocol on the port. | 1.3.6.1.4.1.5624.1.2.31.1.1.1.1.1 | EnabledStatus | read-write | current |
| etsysIetfBridgeDot1dStpPortSpanGuardBlocking OBJECT-TYPE The state of the port with respect to the SpanGuard feature. true(1) - this port is being held in the blocking state by the SpanGuard feature. false(2) - this port is not being held in the blocking state by the SpanGuard feature. When this object has a value of true(1) setting its value to false(2) will cause the SpanGuard feature to no longer hold the port in the blocking state. All other set operations on this object are undefined and MUST NOT have any affect. | 1.3.6.1.4.1.5624.1.2.31.1.1.1.1.2 | TruthValue | read-write | current |
| etsysIetfBridgeDot1dStpPortCistRoleValue OBJECT-TYPE Indicates this port's role on the CIST. disabled -- this port has no role on the CIST. root -- this port has the role of root port on the CIST. designated -- this port has the role of designated port on the CIST. alternate -- this port has the role of alternate port on the CIST. backUp -- this port has the role of backup port on the CIST. | 1.3.6.1.4.1.5624.1.2.31.1.1.1.1.3 | INTEGER {disabled(1), root(2), designated(3), alternate(4), backUp(5)} | read-only | current |
| etsysIetfBridgeDot1dStpPortCistNonForwardingReason OBJECT-TYPE Indicates the reason why this port has been placed in a non-forwarding state on the CIST (other than as a result of normal Spanning Tree protocol operation). none(1) - the port has not been placed in a non-forwarding state due to any exceptional condition. disputed(2) - the port has been placed in listening state because it has a designated role and an inferior designated BPDU has been received. spanGuardLocked(3) - the port has been placed in blocking state because it is configured as an admin edge port and a BPDU has been received. loopProtectEvent(4) - the port has been placed in listening or blocking state because a BPDU timeout has occurred and the port is awaiting reception of a type 2 BPDU on a point-to-point link. loopProtectAdvisory(5) - the port has been placed in listening state because a BPDU timeout has occurred (as with a Loop Protect event), but this condition may be normal because the link partner does not support the Loop Protect feature. loopbackDetected(6) - the port has been placed in blocking state because a loopback condition has been detected. | 1.3.6.1.4.1.5624.1.2.31.1.1.1.1.4 | INTEGER {none(1), disputed(2), spanGuardLocked(3), loopProtectEvent(4), loopProtectAdvisory(5), loopbackDetected(6)} | read-only | current |
| etsysIetfBridgeDot1dStpTopChangeTrapEnable OBJECT-TYPE The enabled/disabled status of the Spanning Tree topology change notification. When this object is set to enabled(1) topology change notifications SHOULD be generated by the agent. When this object is set to disabled(2) topology change notifications MUST NOT be generated by the agent. When this object is set to edgePortDisabled(3) topology change notifications MUST NOT be generated by the agent for ports that are operating as edge ports, as specified by dot1dStpPortOperEdgePort, and SHOULD be generated for all other applicable ports. | 1.3.6.1.4.1.5624.1.2.31.1.1.2 | INTEGER {enabled(1), disabled(2), edgePortDisabled(3)} | read-write | current |
| etsysIetfBridgeDot1dStpNewRootTrapEnable OBJECT-TYPE The enabled/disabled status of the Spanning Tree new root notification. When this object is set to enabled(1) new root notifications SHOULD be generated by the agent. When this object is set to disabled(2) new root notifications MUST NOT be generated by the agent. | 1.3.6.1.4.1.5624.1.2.31.1.1.3 | EnabledStatus | read-write | current |
| etsysIetfBridgeDot1dStpBridgePriorityDefault OBJECT-TYPE The version of the Spanning Tree default Bridge Priority that is to be used by this Bridge. stp8021d1998(1) - indicates the use of Bridge Priority as defined in IEEE Std. 802.1D-1998. stp8021t2001(2) - indicates the use of Bridge Priority as defined in IEEE Std. 802.1t. | 1.3.6.1.4.1.5624.1.2.31.1.1.4 | INTEGER {stp8021d1998(1), stp8021t2001(2)} | read-write | current |
| etsysIetfBridgeDot1dBase OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.31.1.2 | |||
| etsysIetfBridgeDot1dBasePortTable OBJECT-TYPE A table of port based controls. Augments the dot1dBasePortTable. | 1.3.6.1.4.1.5624.1.2.31.1.2.1 | not-accessible | current | |
| etsysIetfBridgeDot1dBasePortEntry OBJECT-TYPE The per port controls for an individual bridge port. | 1.3.6.1.4.1.5624.1.2.31.1.2.1.1 | not-accessible | current | |
| etsysIetfBridgeDot1dBasePortNewLearnedAddrTrap OBJECT-TYPE The status of the new learned address notification feature on this port. When etsysIetfBridgeDot1qNewLearnedAddrTrapEnable and this object are both set to enabled the agent will generate an etsysIetfBridgeDot1qFdbNewLearnedAddr notification for each new entry in the dot1qTpFdbTable with a dot1qTpFdbStatus value equal to learned(3) and a dot1qTpFdbPort value equal to this row's dot1dBasePort value. Setting this object to disabled will prevent the agent from generating etsysIetfBridgeDot1qFdbNewLearnedAddr notifications for this port. If etsysIetfBridgeDot1qNewLearnedAddrTrapEnable is set to disabled, setting this object to enabled will have no effect. Notification generation is not required to match new address rate of learning. A best effort delivery queue is acceptable. | 1.3.6.1.4.1.5624.1.2.31.1.2.1.1.1 | EnabledStatus | read-write | current |
| etsysIetfBridgeDot1dBasePortMovedAddrTrap OBJECT-TYPE The status of the moved address notification feature on this port. When etsysIetfBridgeDot1qMovedAddrTrapEnable and this object are both set to enabled the agent will generate an etsysIetfBridgeDot1qFdbMovedAddr notification for each entry in the dot1qTpFdbTable that has a dot1qTpFdbStatus value equal to learned(3) and a dot1qTpFdbPort value equal to this row's dot1dBasePort value when it is detected that the corresponding dot1qTpFdbAddress has moved to this row's dot1dBasePort from another port. Setting this object to disabled will prevent the agent from generating etsysIetfBridgeDot1qFdbMovedAddr notifications for this port. If etsysIetfBridgeDot1qMovedAddrTrapEnable is set to disabled, setting this object to enabled will have no effect. Notification generation is not required to match the dot1qTpFdbTable entry modification rate. A best effort delivery queue is acceptable. | 1.3.6.1.4.1.5624.1.2.31.1.2.1.1.2 | EnabledStatus | read-write | current |
| etsysIetfBridgeDot1qBase OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.31.1.3 | |||
| etsysIetfBridgeDot1qNewLearnedAddrTrapEnable OBJECT-TYPE The global status of the new learned address notification feature. When this object is set to enabled(1), the agent will generate etsysIetfBridgeDot1qFdbNewLearnedAddr notifications for each new address learned on ports that have their corresponding etsysIetfBridgeDot1dBasePortNewLearnedAddrTrap object set to enabled(1). If etsysIetfBridgeDot1dBasePortNewLearnedAddrTrap is set to disabled(2) for all ports then setting this object to enabled(1) will not have any effect. When this object is set to disabled(1), the agent will not generate any etsysIetfBridgeDot1qFdbNewLearnedAddr notifications. | 1.3.6.1.4.1.5624.1.2.31.1.3.1 | EnabledStatus | read-write | current |
| etsysIetfBridgeDot1qMovedAddrTrapEnable OBJECT-TYPE The global status of the moved address notification feature. When this object is set to enabled(1), the agent will generate etsysIetfBridgeDot1qFdbMovedAddr notifications for each moved address on ports that have their corresponding etsysIetfBridgeDot1dBasePortMovedAddrTrap object set to enabled(1). If etsysIetfBridgeDot1dBasePortMovedAddrTrap is set to disabled(2) for all ports then setting this object to enabled(1) will not have any effect. When this object is set to disabled(1), the agent will not generate any etsysIetfBridgeDot1qFdbMovedAddr notifications. | 1.3.6.1.4.1.5624.1.2.31.1.3.2 | EnabledStatus | read-write | current |
| etsysIetfBridgeDot1qStaticUcastAsMcast OBJECT-TYPE When this object is set to enabled(1), the agent will allow unicast traffic which matches all 48 bits of a static and the source VLAN of a multicast entry in the filter-database, except for the multicast-bit (bit 8). This augments the behavior defined in the IEEE 802.1Q specification. For example, if a static multicast address is configured as 01-02-03-04-05-06, VLAN 7, frames with a destination MAC address of either 01-02-03-04-05-06 or 00-02-03-04-05-06, received on VLAN 7, will match this entry. | 1.3.6.1.4.1.5624.1.2.31.1.3.3 | EnabledStatus | read-write | current |
| etsysIetfBridgeDot1dSpanGuard OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.31.1.4 | |||
| etsysIetfBridgeDot1dStpSpanGuardEnable OBJECT-TYPE The enabled/disabled status of the SpanGuard functionality. | 1.3.6.1.4.1.5624.1.2.31.1.4.1 | EnabledStatus | read-write | current |
| etsysIetfBridgeDot1dStpSpanGuardTrapEnable OBJECT-TYPE The enabled/disabled status of the SpanGuard Port Blocking trap. | 1.3.6.1.4.1.5624.1.2.31.1.4.2 | EnabledStatus | read-write | current |
| etsysIetfBridgeDot1dStpSpanGuardBlockTime OBJECT-TYPE The number of seconds that a port will be held in the blocking state by the SpanGuard feature. The value zero indicates that ports will be held in the blocking state until the entity is reset. Ports that are being held in the blocking state can be returned to normal service by writing the value of false(2) to their respective etsysIetfBridgeDot1dBasePortSpanGuardBlocking objects. | 1.3.6.1.4.1.5624.1.2.31.1.4.3 | Integer32 (0 | 1..65535) | read-write | current |
| etsysIetfBridgeDot1dBackupRoot OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.31.1.5 | |||
| etsysIetfBridgeDot1dStpBackupRootEnable OBJECT-TYPE The enabled/disabled status of the Backup Root functionality on the Common and Internal Spanning Tree. | 1.3.6.1.4.1.5624.1.2.31.1.5.1 | EnabledStatus | read-write | current |
| etsysIetfBridgeDot1dStpBackupRootTrapEnable OBJECT-TYPE The enabled/disabled status of the Backup Root activation trap. | 1.3.6.1.4.1.5624.1.2.31.1.5.2 | EnabledStatus | read-write | current |
| etsysIetfBridgeDot1dLoopProtect OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.31.1.6 | |||
| etsysIetfBridgeDot1dStpLoopProtectPortTable OBJECT-TYPE A table of port based information for the Loop Protect feature. | 1.3.6.1.4.1.5624.1.2.31.1.6.1 | not-accessible | current | |
| etsysIetfBridgeDot1dStpLoopProtectPortEntry OBJECT-TYPE The per port information for the Loop Protect feature. | 1.3.6.1.4.1.5624.1.2.31.1.6.1.1 | not-accessible | current | |
| etsysIetfBridgeDot1dStpLoopProtectPortCistEnable OBJECT-TYPE The enabled/disabled status of the Loop Protect feature for this port on the Common and Internal Spanning Tree (CIST). | 1.3.6.1.4.1.5624.1.2.31.1.6.1.1.1 | EnabledStatus | read-write | current |
| etsysIetfBridgeDot1dStpLoopProtectPortCistBlocking OBJECT-TYPE The state of the port on the CIST with respect to the Loop Protect feature. true(1) - this port is being held in the blocking state by the Loop Protect feature. false(2) - this port is not being held in the blocking state by the Loop Protect feature. When this object has a value of true(1) setting its value to false(2) will cause the Loop Protect feature to no longer hold the port in the blocking state. All other set operations on this object are undefined and MUST NOT have any effect. | 1.3.6.1.4.1.5624.1.2.31.1.6.1.1.2 | TruthValue | read-write | current |
| etsysIetfBridgeDot1dStpLoopProtectPortPartnerCapable OBJECT-TYPE The capability of the port's link partner with respect to the Loop Protect feature. true(1) - the partner supports the Loop Protect feature. false(2) - the partner does not support the Loop Protect feature. When this object has a value of true(1) the full functionality of the Loop Protect feature will be utilized on the port. When this object has a value of false(2) limited Loop Protect functionality will be utilized on the port. | 1.3.6.1.4.1.5624.1.2.31.1.6.1.1.3 | TruthValue | read-write | current |
| etsysIetfBridgeDot1dStpLoopProtectEventThreshold OBJECT-TYPE The number of Loop Protect events that must occur on a given port on a given Spanning Tree instance within the interval defined by etsysIetfBridgeDot1dLoopProtectEventWindow for the port to become locked (i.e., held indefinitely in the blocking state). If this object is set to zero no locking will be performed. | 1.3.6.1.4.1.5624.1.2.31.1.6.2 | Unsigned32 | read-write | current |
| etsysIetfBridgeDot1dStpLoopProtectEventWindow OBJECT-TYPE This time value, measured in units of seconds, specifies the length of the interval during which Loop Protect events are counted for a given port on a given Spanning Tree instance. | 1.3.6.1.4.1.5624.1.2.31.1.6.3 | Unsigned32 | read-write | current |
| etsysIetfBridgeDot1dStpLoopProtectEventTrapEnable OBJECT-TYPE The enabled/disabled status of Loop Protect event notification. | 1.3.6.1.4.1.5624.1.2.31.1.6.4 | EnabledStatus | read-write | current |
| etsysIetfBridgeConformance OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.31.2 | |||
| etsysIetfBridgeGroups OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.31.2.1 | |||
| etsysIetfBridgeCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.31.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| etsysIetfBridgeDot1qFdbNewLearnedAddr NOTIFICATION-TYPE This notification indicates that a new entry has been created in the dot1qTpFdbTable with a dot1qTpFdbStatus value equal to learned(3). | 1.3.6.1.4.1.5624.1.2.31.1.0.1 | current |
| etsysIetfBridgeDot1dSpanGuardPortBlocked NOTIFICATION-TYPE This notification indicates that a bridge port has been placed in the blocking state by the SpanGuard feature. | 1.3.6.1.4.1.5624.1.2.31.1.0.2 | current |
| etsysIetfBridgeDot1dBackupRootActivation NOTIFICATION-TYPE This notification indicates that the BackupRoot feature has activated on this bridge. When multiple spanning trees exist the values of etsysMstpMstId, etsysMstpBridgePriority, and etsysMstpDesignatedRoot for the applicable spanning tree SHOULD be encoded as well. | 1.3.6.1.4.1.5624.1.2.31.1.0.3 | current |
| etsysIetfBridgeDot1qFdbMovedAddr NOTIFICATION-TYPE This notification indicates that a new entry in the dot1qTpFdbTable with a dot1qTpFdbStatus value equal to learned(3) has replaced an entry which had the same dot1qTpFdbAddress but different dot1qTpFdbPort, to indicate a dot1qTpFdbAddress has moved from one port to another. | 1.3.6.1.4.1.5624.1.2.31.1.0.4 | current |
| etsysIetfBridgeDot1dCistLoopProtectEvent NOTIFICATION-TYPE This notification indicates that a Loop Protect event has occurred on a bridge port on the CIST. | 1.3.6.1.4.1.5624.1.2.31.1.0.5 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| etsysIetfBridgeStpPort OBJECT-GROUP A collection of objects relating to per Port Spanning Tree information. | 1.3.6.1.4.1.5624.1.2.31.2.1.1 | current |
| etsysIetfBridgeStpTrap OBJECT-GROUP A collection of objects relating to Spanning Tree SNMP Trap control. | 1.3.6.1.4.1.5624.1.2.31.2.1.2 | current |
| etsysIetfBridgeBase OBJECT-GROUP A collection of objects relating to bridge configuration information. | 1.3.6.1.4.1.5624.1.2.31.2.1.3 | current |
| etsysIetfBridgeDot1qFdbNewAddrNotification NOTIFICATION-GROUP The New Learned Address Notification. | 1.3.6.1.4.1.5624.1.2.31.2.1.4 | current |
| etsysIetfBridgeDot1dStpBridgePriority OBJECT-GROUP An object for support of legacy bridge priorities. | 1.3.6.1.4.1.5624.1.2.31.2.1.5 | current |
| etsysIetfBridgeSpanGuard OBJECT-GROUP A collection of objects relating to the SpanGuard feature. | 1.3.6.1.4.1.5624.1.2.31.2.1.6 | current |
| etsysIetfBridgeSpanGuardNotification NOTIFICATION-GROUP The SpanGuard Port Blocked Notification. | 1.3.6.1.4.1.5624.1.2.31.2.1.7 | current |
| etsysIetfBridgeBackupRoot OBJECT-GROUP A collection of objects relating to the BackupRoot feature. | 1.3.6.1.4.1.5624.1.2.31.2.1.8 | current |
| etsysIetfBridgeBackupRootNotification NOTIFICATION-GROUP The Backup Root Activation Notification. | 1.3.6.1.4.1.5624.1.2.31.2.1.9 | current |
| etsysIetfBridgePortCistRoleValue OBJECT-GROUP The role of the port with respect to the CIST. | 1.3.6.1.4.1.5624.1.2.31.2.1.10 | current |
| etsysIetfBridgeMovedAddr OBJECT-GROUP A collection of objects relating to enabling moved address notifications. | 1.3.6.1.4.1.5624.1.2.31.2.1.11 | current |
| etsysIetfBridgeDot1qFdbMovedAddrNotification NOTIFICATION-GROUP The Moved Address Notification. | 1.3.6.1.4.1.5624.1.2.31.2.1.12 | current |
| etsysIetfBridgeLoopProtect OBJECT-GROUP A collection of objects relating to the Loop Protect feature. | 1.3.6.1.4.1.5624.1.2.31.2.1.13 | current |
| etsysIetfBridgeLoopProtectNotification NOTIFICATION-GROUP The Loop Protect Event Notification for the CIST. | 1.3.6.1.4.1.5624.1.2.31.2.1.14 | current |
| etsysIetfBridgeStpCistNonForwardingReason OBJECT-GROUP An object that indicates the reason for an exceptional non-forwarding condition per port on the CIST. | 1.3.6.1.4.1.5624.1.2.31.2.1.15 | current |
| etsysIetfBridgeStaticUcastAsMcast OBJECT-GROUP A collection of objects pertaining to the transmission of unicast packets received by the device. | 1.3.6.1.4.1.5624.1.2.31.2.1.16 | current |
| etsysIetfBridgeCompliance MODULE-COMPLIANCE The compliance statement for devices that support the IETF BRIDGE-MIB Extension MIB. | 1.3.6.1.4.1.5624.1.2.31.2.2.1 | current |
| etsysIetfBridgeStaticUcastAsMcastCompliance MODULE-COMPLIANCE The compliance statement for devices that support the ability to transmit unicast frames as multicast frames. | 1.3.6.1.4.1.5624.1.2.31.2.2.2 | current |