ENTERASYS-CLASS-OF-SERVICE-MIB
- Registered at
- 1.3.6.1.4.1.5624.1.2.55
- Last updated
- 2008-02-13 15:03
- Organization
- Enterasys Networks, Inc.
- Revisions
- 2008-02-13 15:03, 2007-05-24 02:29, 2005-04-13 21:22, 2004-11-22 16:28, 2004-11-09 15:52
- Namespace
- enterasys
- Source file
ENTERASYS-CLASS-OF-SERVICE-MIB- Digest
sha256:d761e39bd425c37574cdcfd7d44267bc3e3794087551a5f77dca8d1c71a3e719
Description
This MIB module defines a portion of the SNMP enterprise MIBs under the Enterasys enterprise OID pertaining to the configuration and application of transmission and reception attributes that comprise class of service for Enterasys network edge devices or access products.
Contact
Postal: Enterasys Networks 50 Minuteman Rd. Andover, MA 01810-1008 USA Phone: +1 978 684 1000 E-mail: support@enterasys.com WWW: http://www.enterasys.com
Imports
| From | Symbols |
|---|---|
| BRIDGE-MIB | dot1dBasePort |
| ENTERASYS-MIB-NAMES | etsysModules |
| IF-MIB | ifName |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | PortList |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter64, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BRIDGE-MIB ENTERASYS-CLASS-OF-SERVICE-MIB ENTERASYS-MIB-NAMES IANAifType-MIB IF-MIB P-BRIDGE-MIB Q-BRIDGE-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| EtsysCosRateTypes TEXTUAL-CONVENTION This textual convention enumerates the possible inbound or outbound rate types. percentage(0) A percentage of the total bandwidth available. pps(1) Packet per second. kbps(2) Kilobits per second. mbps(3) Megabits per second. gbps(4) Gigabits per second. tbps(5) Terabits per second. | current | |||
| EtsysCosRlCapabilities TEXTUAL-CONVENTION This textual convention defines the supported actions for inbound or outbound rate limiting. drop(0) Packets will be dropped. reprioritize(1) Packet priority change. count(2) Count the either packets or bits through the limiter (specified by the configured EtsysCosRateTypes, percentage(1) not chainingAnd(3) Link limiters together, violated if ALL limiters of like EtsysRateLimitingType are violated, this is the default type of chained limiters. chainingOr(4) Link limiters together, violated if ANY limiters of like EtsysRateLimitingType are violated. syslog(5) Syslog on first violation is supported. trap(6) SNMP Notify on first violation is supported. disable(7) Disable ingress port on first violation is supported. | current | |||
| EtsysRateLimitResetBits TEXTUAL-CONVENTION This textual convention defines the reset properties for the statistics gathering portion of the rate limiters. If bit 0 is set, the etsysCosIrlViolation TruthValue will be reset to false. If bit 1 is set, the etsysCosIrlUnitCounter will be reset to zero. | current | |||
| EtsysRateLimitingType TEXTUAL-CONVENTION This textual convention defines the range of characteristics that can applied to inbound or outbound rate limiters. For chains of limiters, the behavior with respect to limiters of like type (drop or reprioritize) may be controlled via the xxxOR nomenclature. By default ALL limiters of like type must be violated for the action (drop or reprioritize) to apply (implicit AND). The xxxOR types indicate that the action (drop or reprioritize) will be applied if ANY of the limiters is violated. The count option counts packets or bits presented to the limiter. | current | |||
| EtsysViolationAction TEXTUAL-CONVENTION This textual convention defines the available actions to be taken when a RateLimiter is violated for the first time (on a transition from 0 to 1 of a bit in the etsysCosIrlResourceViolationPortList). syslog(0) System logging messages will be sent to the console trap(1) A trap will be sent. disable(2) The dot1dBasePort on which the event occurred will be operationally disabled. | current | |||
| TxQueueList TEXTUAL-CONVENTION Each octet within this value specifies a set of eight transmit queues, with the first octet specifying queues 0 through 7, the second octet specifying queues 8 through 15, et cetera. Within each octet, the most significant bit represents the lowest numbered queue, and the least significant bit represents the highest numbered queue. Thus, each queue of the port is represented by a single bit within the value of this object. If that bit has a value of '1' then that queue is included in the set of queues; the queue is not included if its bit has a value of '0'. | current | |||
| TxqAlgorithms TEXTUAL-CONVENTION This textual convention enumerates the possible queuing algorithms. tailDrop(0) The last entry in the queue is discarded in favor of new entries. headDrop(1) The first entry in the queue is discarded in favor of new entries. red(2) Random Early Discard. wred(3) Weighted Random Early Discard. | current | |||
| TxqArbiterModes TEXTUAL-CONVENTION This textual convention enumerates the possible arbiter modes. strict(0) Queues are serviced until empty or until a higher priority queue requires servicing. weightedFairQ(1) Weighted Fair Queuing. Queues are serviced according to weight. lowLatencyQ(2) Some queues may be strict, while other are weighted-fair. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| etsysCosObjects OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.55.1 | |||
| etsysCosNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.55.1.0 | |||
| etsysCosMasterReset OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.55.1.1 | |||
| etsysCosMibObjectAnullingBehavior OBJECT-TYPE This object SHALL always read false. Setting this object to true MUST remove all existing entries from all tables in all subordinate objects of etsysCosObjects, and nullify all changes to any values. The resulting behavior should yield an unconfigured etsysCosMIB. | 1.3.6.1.4.1.5624.1.2.55.1.1.1 | TruthValue | read-write | current |
| etsysCosCapabilities OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.55.1.2 | |||
| etsysCosCapability OBJECT-TYPE A list of capabilities related to class of service support. A set bit, with the value 1, indicates support for the described functionality. A clear bit, with the value 0, indicates the described functionality is not supported. | 1.3.6.1.4.1.5624.1.2.55.1.2.1 | Bits {supports8021Dpriority(0), supportsTosOverwrite(1), supportsTosMasking(2), supportsTransmitQueue(3), supportsInboundRateLimiting(4), supportsOutBoundRateLimiting(5), supportsDropPrecedence(6), supportsUnknownUnicastRateLimiting(7), supportsMulticastRateLimiting(8), supportsBroadcastRateLimiting(9), supportsTransmitQueuePortShaping(10)} | read-only | current |
| etsysCos OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.55.1.3 | |||
| etsysCosMaxEntries OBJECT-TYPE The maximum number of entries allowed in the etsysCosTable. | 1.3.6.1.4.1.5624.1.2.55.1.3.1 | Unsigned32 | read-only | current |
| etsysCosNumEntries OBJECT-TYPE The current number of entries in the etsysCosTable. | 1.3.6.1.4.1.5624.1.2.55.1.3.2 | Gauge32 | read-only | current |
| etsysCosLastChange OBJECT-TYPE The time at which the etsysCos Table was last modified. | 1.3.6.1.4.1.5624.1.2.55.1.3.3 | TimeStamp | read-only | current |
| etsysCosEnableState OBJECT-TYPE If enabled(1), controls configured for this MIB supersede controls for portions of BRIDGE-MIB dealing with priority queue mapping, all of the CTRON-RATE-POLICING-MIB and all of the CTRON-TX-QUEUE-ARBITRATION-MIB. A setting to disabled(2) from enabled(1), results in the restoration of any existing configurations from the aforementioned MIBs. | 1.3.6.1.4.1.5624.1.2.55.1.3.4 | EnabledStatus | read-write | current |
| etsysCosTable OBJECT-TYPE A table containing class of service settings to be applied to a dot1dBridge port or port groups. | 1.3.6.1.4.1.5624.1.2.55.1.3.5 | not-accessible | current | |
| etsysCosEntry OBJECT-TYPE Conceptually defines a particular entry within the etsysCosTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | 1.3.6.1.4.1.5624.1.2.55.1.3.5.1 | not-accessible | current | |
| etsysCosIndex OBJECT-TYPE A unique class of service identifier for this CoS setting. For reasons of backward compatibility indexes 0-7 MUST exist and be configured with a etsysCos8021dPriority which matches the etsysCosIndex. | 1.3.6.1.4.1.5624.1.2.55.1.3.5.1.1 | Unsigned32 (0..32767) | not-accessible | current |
| etsysCosRowStatus OBJECT-TYPE This object allows for the dynamic creation and deletion of entries within the etsysCosTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | 1.3.6.1.4.1.5624.1.2.55.1.3.5.1.2 | RowStatus | read-create | current |
| etsysCos8021dPriority OBJECT-TYPE The 802.1D priority to be associated with this Class of Service. If this field is returned as (-1) then it has not been configured and no action will be taken for this attribute. | 1.3.6.1.4.1.5624.1.2.55.1.3.5.1.3 | Integer32 (-1 | 0..7) | read-create | current |
| etsysCosTosValue OBJECT-TYPE The Type of Service or Differentiated Services Code Point value and mask to be associated with this Class of Service. If this field is returned as <empty-string>, then it has not been configured and no action will be taken for this attribute. The first octet shall represent the TOS/DSCP value and the second octet shall represent the mask applied to that value. Agents that do not support masking shall fail sets to this object that include a mask octet. | 1.3.6.1.4.1.5624.1.2.55.1.3.5.1.4 | OCTET STRING (SIZE(0..2)) | read-create | current |
| etsysCosTxqReference OBJECT-TYPE The transmit queue table instance to reference for this Class of Service. | 1.3.6.1.4.1.5624.1.2.55.1.3.5.1.5 | Integer32 (0..32767) | read-create | current |
| etsysCosIrlReference OBJECT-TYPE The inbound rate limiting table instance to reference for this Class of Service. If this instance is returned as (-1), no action will be taken for this attribute. | 1.3.6.1.4.1.5624.1.2.55.1.3.5.1.6 | Integer32 (-1 | 0..32767) | read-create | current |
| etsysCosOrlReference OBJECT-TYPE The outbound rate limiting table instance to reference for this Class of Service. If this instance is returned as (-1), no action will be taken for this attribute. | 1.3.6.1.4.1.5624.1.2.55.1.3.5.1.7 | Integer32 (-1 | 0..32767) | read-create | current |
| etsysCosDropPrecedence OBJECT-TYPE The drop precedence default action. If this field is returned as (-1) then it has not been configured and no action will be taken for this attribute. If unsupported the agent may optionally implement this leaf as read-only. | 1.3.6.1.4.1.5624.1.2.55.1.3.5.1.8 | Integer32 (-1 | 0..255) | read-create | current |
| etsysCosFloodControlStatus OBJECT-TYPE Controls whether flooded traffic will be rate limited based on configuration in the etsysCosFloodControl groups. | 1.3.6.1.4.1.5624.1.2.55.1.3.5.1.9 | EnabledStatus | read-create | current |
| etsysCosTxq OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.55.1.4 | |||
| etsysCosTxqNumPortTypes OBJECT-TYPE The actual number of distinctly unique (as defined by the set of shared Transmit Queue capabilities) port types available for configuration on this agent. | 1.3.6.1.4.1.5624.1.2.55.1.4.1 | Integer32 (1..2048) | read-only | current |
| etsysCosTxqPortTypeTable OBJECT-TYPE A table defining the distinctly unique transmit queue characteristics of a group of ports. | 1.3.6.1.4.1.5624.1.2.55.1.4.2 | not-accessible | current | |
| etsysCosTxqPortTypeEntry OBJECT-TYPE Conceptually defines a particular entry within the etsysCosTxqPortTypeTable. | 1.3.6.1.4.1.5624.1.2.55.1.4.2.1 | not-accessible | current | |
| etsysCosTxqPortTypeIndex OBJECT-TYPE The port type associated with the unique set of ports sharing these capabilities. | 1.3.6.1.4.1.5624.1.2.55.1.4.2.1.1 | Integer32 (0..32767) | not-accessible | current |
| etsysCosTxqPortTypeDescr OBJECT-TYPE The textual description that represents this set of dot1dBridge ports. | 1.3.6.1.4.1.5624.1.2.55.1.4.2.1.2 | SnmpAdminString | read-only | current |
| etsysCosTxqPortTypeEligiblePorts OBJECT-TYPE The list of dot1dBridge ports belonging (having the same capabilities) to this port type. | 1.3.6.1.4.1.5624.1.2.55.1.4.2.1.3 | PortList | read-only | current |
| etsysCosTxqPortTypeUnselectedPorts OBJECT-TYPE The list of dot1dBridge ports not yet bound to a user created row (port group) in the etsysCosTxqPortGroupTable. | 1.3.6.1.4.1.5624.1.2.55.1.4.2.1.4 | PortList | read-only | current |
| etsysCosTxqPortTypeNumberOfQueues OBJECT-TYPE The number of queues available for configuration by this agent on this type of port. | 1.3.6.1.4.1.5624.1.2.55.1.4.2.1.5 | Integer32 | read-only | current |
| etsysCosTxqPortTypeSupportedRateTypes OBJECT-TYPE The rate types available for use in these settings. | 1.3.6.1.4.1.5624.1.2.55.1.4.2.1.6 | EtsysCosRateTypes | read-only | current |
| etsysCosTxqPortTypeNumberOfSlices OBJECT-TYPE The number of slices available for configuration. | 1.3.6.1.4.1.5624.1.2.55.1.4.2.1.7 | Integer32 | read-only | current |
| etsysCosTxqPortTypeQueueAlgorithms OBJECT-TYPE The queuing algorithms available for use with these settings. | 1.3.6.1.4.1.5624.1.2.55.1.4.2.1.8 | TxqAlgorithms | read-only | current |
| etsysCosTxqPortTypeQueueArbiterModes OBJECT-TYPE The arbitration modes available for use with these setting. | 1.3.6.1.4.1.5624.1.2.55.1.4.2.1.9 | TxqArbiterModes | read-only | current |
| etsysCosTxqPortTypeMaxDropPrecedence OBJECT-TYPE The maximum drop precedence allowed on this port type. | 1.3.6.1.4.1.5624.1.2.55.1.4.2.1.10 | Unsigned32 (0..255) | read-only | current |
| etsysCosTxqPortTypeLLQEligibleQueues OBJECT-TYPE The queues eligible for low latency queue configuration. | 1.3.6.1.4.1.5624.1.2.55.1.4.2.1.11 | TxQueueList | read-only | current |
| etsysCosTxqUnitTable OBJECT-TYPE A table containing the rate type, minimum and maximum limits of the port groups and their respective granularity. | 1.3.6.1.4.1.5624.1.2.55.1.4.3 | not-accessible | current | |
| etsysCosTxqUnitEntry OBJECT-TYPE Conceptually defines a particular entry within the etsysCosTxqUnitTable. Entries in this table indicate the port group boundaries for the type of port specified. | 1.3.6.1.4.1.5624.1.2.55.1.4.3.1 | not-accessible | current | |
| etsysCosTxqUnitTypeIndex OBJECT-TYPE The unit identifier for this port type. The metric at which the etsysCosTxqUnitMinRate, etsysCosTxqUnitMaxRate and etsysCosTxqUnitGranularity are applied. | 1.3.6.1.4.1.5624.1.2.55.1.4.3.1.1 | EtsysCosRateTypes | not-accessible | current |
| etsysCosTxqUnitMaxRate OBJECT-TYPE The maximum rate supported at the rate of units specified by etsysCosTxqUnitTypeIndex. | 1.3.6.1.4.1.5624.1.2.55.1.4.3.1.2 | Unsigned32 | read-only | current |
| etsysCosTxqUnitMinRate OBJECT-TYPE The minimum rate supported at the rate of units specified by etsysCosTxqUnitTypeIndex. | 1.3.6.1.4.1.5624.1.2.55.1.4.3.1.3 | Unsigned32 | read-only | current |
| etsysCosTxqUnitGranularity OBJECT-TYPE The smallest unit by which a rate can be modified. | 1.3.6.1.4.1.5624.1.2.55.1.4.3.1.4 | Unsigned32 | read-only | current |
| etsysCosTxqMaxPortGroups OBJECT-TYPE The maximum number of port groups supported by this agent. | 1.3.6.1.4.1.5624.1.2.55.1.4.4 | Unsigned32 | read-only | current |
| etsysCosTxqNumPortGroups OBJECT-TYPE The number of assigned dot1dBridge port groups present in this agent. This number also reflects the port groups with a default system setup indicated by a zero(0) index. | 1.3.6.1.4.1.5624.1.2.55.1.4.5 | Gauge32 | read-only | current |
| etsysCosTxqPortGroupLastChange OBJECT-TYPE The time at which the etsysCosTxqPortTable was last modified. | 1.3.6.1.4.1.5624.1.2.55.1.4.6 | TimeStamp | read-only | current |
| etsysCosTxqPortGroupTable OBJECT-TYPE A table containing the user settings for specific types of ports and their matching transmit queue configurations. | 1.3.6.1.4.1.5624.1.2.55.1.4.7 | not-accessible | current | |
| etsysCosTxqPortGroupEntry OBJECT-TYPE Conceptually defines a particular entry within the etsysCosTxqPortTypeTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | 1.3.6.1.4.1.5624.1.2.55.1.4.7.1 | not-accessible | current | |
| etsysCosTxqPortGroupIndex OBJECT-TYPE The user-specified port group for which the settings are defined. This value MAY have meaning to the user for the purposes of identifying groups of dot1dBridge ports with similar function (uplink, user, etc). A value of zero(0) has special meaning in that it identifies the default port grouping of characteristics present in the agent. Entries indexed by a zero have a max-access of read-only. This value will have a system defined maximum of etsysCosTxqMaxPortGroups. | 1.3.6.1.4.1.5624.1.2.55.1.4.7.1.1 | Integer32 (0 | 1..32767) | not-accessible | current |
| etsysCosTxqPortGroupRowStatus OBJECT-TYPE This object allows for the dynamic creation and deletion of entries within the etsysCosTxqPortTypeTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. When this object's value is active(1) the specified dot1dBridge ports listed in the etsysCosTxqPortGroupList shall be removed from etsysCosTxqPortGroupUnselectedPorts. A row in transition to the active(1) state will have its port group list validated before activation. A port list that cannot be made active MUST result in the row state to become notReady(3) and no configuration action will be taken for this row. Rows not in the active(1) state SHALL NOT be persisted across entity resets and MUST return the ports from its port group list to the etsysCosTxqPortGroupUnselectedPorts. When this object's value is set to destroy(6) from an active(1) state, all ports contained in etsysCosTxqPortList shall be returned to the etsysCosTxqPortGroupUnselectedPorts and all entries referencing this row shall be removed as well. | 1.3.6.1.4.1.5624.1.2.55.1.4.7.1.2 | RowStatus | read-create | current |
| etsysCosTxqPortGroupList OBJECT-TYPE The list of dot1dBridge ports to be assigned to this group. Ports in this list MUST : o Be mutually exclusive from other entries in this table o Be comprised of the same port type as defined by the etsysCosTxqPortTypeIndex. | 1.3.6.1.4.1.5624.1.2.55.1.4.7.1.3 | PortList | read-create | current |
| etsysCosTxqPortGroupName OBJECT-TYPE The administratively assigned textual description of this port group. | 1.3.6.1.4.1.5624.1.2.55.1.4.7.1.4 | SnmpAdminString | read-create | current |
| etsysCosTxqPortCfgTable OBJECT-TYPE A table containing the queue values to be used in the entries specified. Rows in this table are populated based on rowCreation in the etsysCosTxqPortGroupTable. Changes to this table are reflected in the etsysCosTxqPortGroupLastChange value. | 1.3.6.1.4.1.5624.1.2.55.1.4.8 | not-accessible | current | |
| etsysCosTxqPortCfgEntry OBJECT-TYPE Conceptually defines a particular entry within the etsysCosTxqPortCfgTable. Details contained within this entry will depict the slice distributions across each queue per dot1dBridge port, as well as determine the arbiter's method for servicing the queues. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | 1.3.6.1.4.1.5624.1.2.55.1.4.8.1 | not-accessible | current | |
| etsysCosTxqPortArbMode OBJECT-TYPE The mode in which the transmit queue arbiter services the queues. When in strict-mode, the queues will be services by numerical priority from lowest to highest. Lower priority queues will not be services until the current queue is drained. When set to weightedFairQ, the number of slices in a particular queue determines the frequency of servicing. A slice configuration of 00-00...100 will set the port to strict-mode. | 1.3.6.1.4.1.5624.1.2.55.1.4.8.1.1 | TxqArbiterModes | read-only | current |
| etsysCosTxqPortSliceSetting OBJECT-TYPE This object is an octet string in which the number of octets corresponds to the number of transmit queues for each dot1dBridge port. The value of the first octet represents the number of 'slices' of transmit resources to allocate to Queue 0, the second octet represents the number for Queue 1, and so forth. The sum of all the octets in the octet string must add up to the total number of slices available for that port type as defined in etsysCosTxqNumberOfSlices. For example, on a port having 4 transmit queues and where transmit resources are divided into 16 slices, writing an octet string of {0x00, 0x04, 0x04, 0x08} would have the following effect: At least 50% of the frames transmitted are from Queue 3 At least 25% of the frames transmitted are from Queue 2 At least 25% of the frames transmitted are from Queue 1 No frames will be transmitted from Queue 0 until Queues 1, 2 and 3 are empty. | 1.3.6.1.4.1.5624.1.2.55.1.4.8.1.2 | OCTET STRING (SIZE(1..256)) | read-write | current |
| etsysCosTxqResourceTable OBJECT-TYPE A table containing rate, units and queuing algorithm to be used in the entries specified. | 1.3.6.1.4.1.5624.1.2.55.1.4.9 | not-accessible | current | |
| etsysCosTxqResourceEntry OBJECT-TYPE Conceptually defines a particular entry within the etsysCosTxqResourceTable. These entries contain the specific attributes of transmission rates (traffic shaping) and dropping styles to be applied to dot1dBridge ports. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | 1.3.6.1.4.1.5624.1.2.55.1.4.9.1 | not-accessible | current | |
| etsysCosTxqResourceQueueNum OBJECT-TYPE The queue number associated with this entry. | 1.3.6.1.4.1.5624.1.2.55.1.4.9.1.1 | Integer32 (0..32767) | not-accessible | current |
| etsysCosTxqPortQUnit OBJECT-TYPE Identifies the unit size for the etsysCosTxqPortRate. Values MUST NOT exceed the capacity of the etsysCosTxqPortType they are associated with. | 1.3.6.1.4.1.5624.1.2.55.1.4.9.1.2 | EtsysCosRateTypes | read-write | current |
| etsysCosTxqPortQRate OBJECT-TYPE Identifies the number of units used in this queue configuration. The value (0) shall carry special meaning that indicates the settings MUST NOT be applied to the queue. | 1.3.6.1.4.1.5624.1.2.55.1.4.9.1.3 | Integer32 (0 | 1..2147483647) | read-write | current |
| etsysCosTxqPortQAlgorithm OBJECT-TYPE Determines the rules by which discarding is applied. | 1.3.6.1.4.1.5624.1.2.55.1.4.9.1.4 | TxqAlgorithms | read-write | current |
| etsysCosTxqPortQLLQenable OBJECT-TYPE This object represents the requested use of low latency queues for this dot1dBridge port. This object is REQUIRED to fail set attempts for unsupported hardware. | 1.3.6.1.4.1.5624.1.2.55.1.4.9.1.5 | EnabledStatus | read-write | current |
| etsysCosTxqReferenceMappingMaxReference OBJECT-TYPE The maximum number of etsysCosTxqReferences allowed in the etsysCosTxqMappingTable. | 1.3.6.1.4.1.5624.1.2.55.1.4.10 | Unsigned32 | read-only | current |
| etsysCosTxqReferenceMappingTable OBJECT-TYPE A table containing the user defined mappings of the TxQ refences found in the etsysCosTable to physical transmit queues associated with the specified port-group. | 1.3.6.1.4.1.5624.1.2.55.1.4.11 | not-accessible | current | |
| etsysCosTxqReferenceMappingEntry OBJECT-TYPE Conceptually defines a particular entry within the etsysCosTxqReferenceMappingTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | 1.3.6.1.4.1.5624.1.2.55.1.4.11.1 | not-accessible | current | |
| etsysCosTxqResourceQueueNumber OBJECT-TYPE The queue number to be bound to this reference. | 1.3.6.1.4.1.5624.1.2.55.1.4.11.1.1 | Integer32 (0..32767) | read-write | current |
| etsysCosTxqDropProfilesMaxEntries OBJECT-TYPE The maximum number of entries allowed in the etsysCosDropProfiles Table. | 1.3.6.1.4.1.5624.1.2.55.1.4.12 | Unsigned32 | read-only | current |
| etsysCosTxqDropProfilesNumEntries OBJECT-TYPE The current number of entries in the etsysCosQueueProfiles Table. | 1.3.6.1.4.1.5624.1.2.55.1.4.13 | Gauge32 | read-only | current |
| etsysCosTxqDropProfilesLastChange OBJECT-TYPE The time at which the etsysCosQueueProfiles Table was last modified. | 1.3.6.1.4.1.5624.1.2.55.1.4.14 | TimeStamp | read-only | current |
| etsysCosTxqDropProfilesTable OBJECT-TYPE A table containing the queue profile configurations. | 1.3.6.1.4.1.5624.1.2.55.1.4.15 | not-accessible | current | |
| etsysCosTxqDropProfilesEntry OBJECT-TYPE The minimum and maximum queue depth, maximum drop probability and queue depth at max drop probability for the queue specified. These entries represent the currently configured settings for this agent. Entries indexed with (0) are default system entries. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | 1.3.6.1.4.1.5624.1.2.55.1.4.15.1 | not-accessible | current | |
| etsysCosTxqDropSettingIndex OBJECT-TYPE A unique identifier for this queue setting. Identifiers with an index of 0 MUST be read-only and depict the system default settings. | 1.3.6.1.4.1.5624.1.2.55.1.4.15.1.1 | Unsigned32 | not-accessible | current |
| etsysCosTxqDropProfilesRowStatus OBJECT-TYPE This object allows for the dynamic creation and deletion of entries within the etsysCosTxqDropProfilesTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | 1.3.6.1.4.1.5624.1.2.55.1.4.15.1.2 | RowStatus | read-create | current |
| etsysCosTxqDropProfilesMin OBJECT-TYPE The minimum percentage of the queue depth, above which frames will dropped at the drop probability rate. | 1.3.6.1.4.1.5624.1.2.55.1.4.15.1.3 | Integer32 (0..100) | read-create | current |
| etsysCosTxqDropProfilesMax OBJECT-TYPE The maximum percentage of the queue depth, above which all frames will be dropped. This object's value MUST be greater than or equal to the etsysCosTxqDropProfilesMin. | 1.3.6.1.4.1.5624.1.2.55.1.4.15.1.4 | Integer32 (0..100) | read-create | current |
| etsysCosTxqDropProfilesMaxDropProb OBJECT-TYPE The drop probability associated with this setting by percentage. This number represents the percentage of traffic that will be dropped once the minimum rate has been exceeded. | 1.3.6.1.4.1.5624.1.2.55.1.4.15.1.5 | Integer32 (0..100) | read-create | current |
| etsysCosTxqDropProfilesQueueDepthAtMaxProb OBJECT-TYPE The drop probability percentage slope which defines how aggressively packets are discarded as the queue fills. | 1.3.6.1.4.1.5624.1.2.55.1.4.15.1.6 | Integer32 (0..100) | read-create | current |
| etsysCosTxqDropPrecedenceTable OBJECT-TYPE A table containing the drop precedence configurations. | 1.3.6.1.4.1.5624.1.2.55.1.4.16 | not-accessible | current | |
| etsysCosTxqDropPrecedenceEntry OBJECT-TYPE The drop precedence definitions for the queue specified. | 1.3.6.1.4.1.5624.1.2.55.1.4.16.1 | not-accessible | current | |
| etsysCosTableDropPrecedence OBJECT-TYPE The corresponding etsysCosDropPrecedence from the etsysCosTable this entry refers to. | 1.3.6.1.4.1.5624.1.2.55.1.4.16.1.1 | Unsigned32 | not-accessible | current |
| etsysCosTxqDropProfileQueueCfgID OBJECT-TYPE The etsysCosTxqDropProfilesEntry that describes the configuration for this entry. If this value references a non-existent row in the etsysCosTxqDropPrecedenceTable the device will behave as if the row existed and was populated with default parameters. | 1.3.6.1.4.1.5624.1.2.55.1.4.16.1.2 | Integer32 | read-write | current |
| etsysCosIrl OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.55.1.5 | |||
| etsysCosIrlPortTypeMaxEntries OBJECT-TYPE The actual number of distinctly unique (as defined by the set of shared inbound RateLimiting capabilities) port types available for configuration on this agent. | 1.3.6.1.4.1.5624.1.2.55.1.5.1 | Unsigned32 | read-only | current |
| etsysCosIrlPortTypeTable OBJECT-TYPE A table defining the distinctly unique IRL characteristics of a group of ports. | 1.3.6.1.4.1.5624.1.2.55.1.5.2 | not-accessible | current | |
| etsysCosIrlPortTypeEntry OBJECT-TYPE Conceptually defines a particular entry within the etsysCosIrlPortTypeTable. | 1.3.6.1.4.1.5624.1.2.55.1.5.2.1 | not-accessible | current | |
| etsysCosIrlPortTypeIndex OBJECT-TYPE The port type associated with the unique set of ports sharing these capabilities. | 1.3.6.1.4.1.5624.1.2.55.1.5.2.1.1 | Integer32 (0..32767) | not-accessible | current |
| etsysCosIrlPortTypeDescr OBJECT-TYPE The textual description that represents this set of dot1dBridge ports. | 1.3.6.1.4.1.5624.1.2.55.1.5.2.1.2 | SnmpAdminString | read-only | current |
| etsysCosIrlPortTypeEligiblePorts OBJECT-TYPE The list of dot1dBridge ports belonging (having the same capabilities) to this port type. | 1.3.6.1.4.1.5624.1.2.55.1.5.2.1.3 | PortList | read-only | current |
| etsysCosIrlPortTypeUnselectedPorts OBJECT-TYPE The list of dot1dBridge ports not yet bound to a user created row (port group) in the etsysCosIrlPortGroupTable. | 1.3.6.1.4.1.5624.1.2.55.1.5.2.1.4 | PortList | read-only | current |
| etsysCosIrlPortTypeNumberOfIRLs OBJECT-TYPE The maximum number of inbound rate limiters supported by this agent on this type of port. | 1.3.6.1.4.1.5624.1.2.55.1.5.2.1.5 | Integer32 (0..65535) | read-only | current |
| etsysCosIrlPortTypeSupportedRateTypes OBJECT-TYPE The rate types available on this type of port. | 1.3.6.1.4.1.5624.1.2.55.1.5.2.1.6 | EtsysCosRateTypes | read-only | current |
| etsysCosIrlPortTypeCapabilities OBJECT-TYPE The EtsysCosRlCapabilities available on this type of port. | 1.3.6.1.4.1.5624.1.2.55.1.5.2.1.7 | EtsysCosRlCapabilities | read-only | current |
| etsysCosIrlUnitTable OBJECT-TYPE A table containing the rate type, minimum and maximum limits of the port groups and their respective granularity. | 1.3.6.1.4.1.5624.1.2.55.1.5.3 | not-accessible | current | |
| etsysCosIrlUnitEntry OBJECT-TYPE Conceptually defines a particular entry within the etsysCosIrlUnitTable. Entries in this table indicate the port group boundaries for the type of port specified. | 1.3.6.1.4.1.5624.1.2.55.1.5.3.1 | not-accessible | current | |
| etsysCosIrlUnitTypeIndex OBJECT-TYPE The unit identifier for this port type. The metric at which the etsysCosIrlUnitMinRate, etsysCosIrlUnitMaxRate and etsysCosIrlUnitGranularity are applied. | 1.3.6.1.4.1.5624.1.2.55.1.5.3.1.1 | EtsysCosRateTypes | not-accessible | current |
| etsysCosIrlUnitMaxRate OBJECT-TYPE The maximum rate supported at the rate of units specified by etsysCosIrlUnitType. | 1.3.6.1.4.1.5624.1.2.55.1.5.3.1.2 | Unsigned32 | read-only | current |
| etsysCosIrlUnitMinRate OBJECT-TYPE The minimum rate supported at the rate of units specified by etsysCosIrlUnitType. | 1.3.6.1.4.1.5624.1.2.55.1.5.3.1.3 | Unsigned32 | read-only | current |
| etsysCosIrlUnitGranularity OBJECT-TYPE The smallest unit by which a rate can be modified. | 1.3.6.1.4.1.5624.1.2.55.1.5.3.1.4 | Unsigned32 | read-only | current |
| etsysCosIrlPortGroupMaxEntries OBJECT-TYPE The maximum number of port groups supported by this agent. | 1.3.6.1.4.1.5624.1.2.55.1.5.4 | Unsigned32 | read-only | current |
| etsysCosIrlPortGroupNumEntries OBJECT-TYPE The number of assigned dot1dBridge port groups present in this agent. This number also reflects the port groups with a default system setup indicated by a zero(0) index. | 1.3.6.1.4.1.5624.1.2.55.1.5.5 | Gauge32 | read-only | current |
| etsysCosIrlPortGroupLastChange OBJECT-TYPE The time at which the etsysCosIrlPortTypeTable was last modified. | 1.3.6.1.4.1.5624.1.2.55.1.5.6 | TimeStamp | read-only | current |
| etsysCosIrlPortGroupTable OBJECT-TYPE A table containing the settings for specific types of dot1dBridge ports and their matching inbound rate limiting configurations. | 1.3.6.1.4.1.5624.1.2.55.1.5.7 | not-accessible | current | |
| etsysCosIrlPortGroupEntry OBJECT-TYPE Conceptually defines a particular entry within the etsysCosIrlPortTypeTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | 1.3.6.1.4.1.5624.1.2.55.1.5.7.1 | not-accessible | current | |
| etsysCosIrlPortGroupIndex OBJECT-TYPE The user-specified port group for which the settings are defined. This value MAY have meaning to the user for the purposes of identifying groups of dot1dBridge ports with similar function (uplink, user, etc). A value of zero(0) has special meaning in that it identifies the default port grouping of characteristics present in the agent. Entries indexed by a zero have a max-access of read-only. This value will have a system defined maximum of etsysCosIrlPortGroupMaxEntries. | 1.3.6.1.4.1.5624.1.2.55.1.5.7.1.1 | Integer32 (0 | 1..32767) | not-accessible | current |
| etsysCosIrlPortGroupRowStatus OBJECT-TYPE This object allows for the dynamic creation and deletion of entries within the etsysCosIrlPortGroupTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. When this object's value is active(1) the specified dot1dBridge ports listed in the PortGroupList shall be removed from UnselectedPorts. A row in transition to the active(1) state will have its port group list validated before activation. A port list that cannot be made active MUST result in the row state to become notReady(3) and no configuration action will be taken for this row. Rows not in the active(1) state SHALL NOT be persisted across entity resets and MUST return the ports from its port group list to the etsysCosIrlPortTypeUnselectedPorts. When this object's value is set to destroy(6) from an active(1) state, all dot1dBridge ports contained in etsysCosIrlPortGroupList shall be returned to the etsysCosIrlPortTypeUnselectedPorts and all entries referencing this row shall be removed as well. | 1.3.6.1.4.1.5624.1.2.55.1.5.7.1.2 | RowStatus | read-create | current |
| etsysCosIrlPortGroupList OBJECT-TYPE The list of dot1dBridge ports to be assigned to this group. Ports in this list MUST : o Be mutually exclusive from other entries in this table o Be comprised of the same port type as defined by the etsysCosIrlPortTypeIndex. | 1.3.6.1.4.1.5624.1.2.55.1.5.7.1.3 | PortList | read-write | current |
| etsysCosIrlPortGroupName OBJECT-TYPE The administratively assigned textual description of this port group. | 1.3.6.1.4.1.5624.1.2.55.1.5.7.1.4 | SnmpAdminString | read-write | current |
| etsysCosIrlPortCfgTable OBJECT-TYPE A table containing the inbound rate limiting configurations to be used in the entries specified. Rows in this table are populated based on rowCreation in the etsysCosIrlPortGroupTable. Changes to this table are reflected in the etsysCosTxqPortGroupLastChange value. | 1.3.6.1.4.1.5624.1.2.55.1.5.8 | not-accessible | current | |
| etsysCosIrlPortCfgEntry OBJECT-TYPE Conceptually defines a particular entry within the etsysCosIrlPortCfgTable. Details contained within this entry will depict the inbound rate limiter's reception rate and parent rate limiter. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | 1.3.6.1.4.1.5624.1.2.55.1.5.8.1 | not-accessible | current | |
| etsysCosIrlPortCfgFloodLimiter OBJECT-TYPE This object will represent the etsysCosIrlResourceNum to be used to limit flooded traffic. | 1.3.6.1.4.1.5624.1.2.55.1.5.8.1.2 | Integer32 (-1 | 0..65535) | read-write | deprecated |
| etsysCosIrlResourceTable OBJECT-TYPE A table containing the inbound rate limiting configurations to be used in the entries specified. | 1.3.6.1.4.1.5624.1.2.55.1.5.9 | not-accessible | current | |
| etsysCosIrlResourceEntry OBJECT-TYPE Conceptually defines a particular entry within the etsysCosIrlResourceTable. These entries contain the specific attributes of policing rates (traffic clipping) and parent rate limiter. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | 1.3.6.1.4.1.5624.1.2.55.1.5.9.1 | not-accessible | current | |
| etsysCosIrlResourceIrlNum OBJECT-TYPE The inbound rate limiter number associated with this entry. | 1.3.6.1.4.1.5624.1.2.55.1.5.9.1.1 | Unsigned32 | not-accessible | current |
| etsysCosIrlResourceUnits OBJECT-TYPE Identifies the unit size for the etsysCosIrlPortRate. Values MUST NOT exceed the capacity of the etsysCosIrlPortType they are associated with. | 1.3.6.1.4.1.5624.1.2.55.1.5.9.1.2 | EtsysCosRateTypes | read-write | current |
| etsysCosIrlResourceRate OBJECT-TYPE Identifies the number of units above which packets will considered in violation. This object is read-only for limiters of type count(5). The value (0) shall carry special meaning in this case of unset. Rate limiters identified as having a value of (0) shall not have this settings applied to the limiter. | 1.3.6.1.4.1.5624.1.2.55.1.5.9.1.3 | Integer32 (0 | 1..2147483647) | read-write | current |
| etsysCosIrlResourceParentIrl OBJECT-TYPE Setting this object to a positive value indicates the etsysCosIrlResourceIrlNum to be used in conjunction with this setting. A value of (-1) indicates the parent Irl is not configured. | 1.3.6.1.4.1.5624.1.2.55.1.5.9.1.4 | Integer32 | read-write | current |
| etsysCosIrlResourceType OBJECT-TYPE The characteristics applied to this rate limiter. When chaining limiters is used, the AND / OR attribute denotes the limiter logic in handling violation. For example, option rePrioritizeAnd(2) requires that the current limiter AND it's parent be violated for the packet to be reprioritized. The rePrioritizeOr(3) option only needs one OR the other to be violated for the action to be taken. | 1.3.6.1.4.1.5624.1.2.55.1.5.9.1.5 | EtsysRateLimitingType | read-write | current |
| etsysCosIrlResourceActionCosIndex OBJECT-TYPE This object will represent the CoS to be applied to packets in violation of the limits set when the etsysCosIrlResourceType is set to one of the rePrioritize types. | 1.3.6.1.4.1.5624.1.2.55.1.5.9.1.6 | Integer32 | read-write | current |
| etsysCosIrlResourceAction OBJECT-TYPE This object allows syslog, SNMP traps, or disabling actions to be taken limiters are first exceeded. | 1.3.6.1.4.1.5624.1.2.55.1.5.9.1.7 | EtsysViolationAction | read-write | current |
| etsysCosIrlResourceViolationPortList OBJECT-TYPE The dot1dBridge ports this limiter has been violated on. Writing this object will clear the dot1dBridge ports given which have a corresponding bit of zero (0) in the PortList. | 1.3.6.1.4.1.5624.1.2.55.1.5.9.1.8 | PortList | read-write | current |
| etsysCosIrlResourceClearCounters OBJECT-TYPE This object shall always read false(2). When set to true(1) this object clears the counter associated with this entry, if the associated entry is a limiter of type count(5). | 1.3.6.1.4.1.5624.1.2.55.1.5.9.1.9 | TruthValue | read-write | current |
| etsysCosIrlReferenceMappingMaxReference OBJECT-TYPE The maximum number of etsysCosIrlReferences allowed in the etsysCosIrlMappingTable. | 1.3.6.1.4.1.5624.1.2.55.1.5.10 | Unsigned32 | read-only | current |
| etsysCosIrlReferenceMappingLastChange OBJECT-TYPE The time at which the etsysCosIrlReferenceMappingTable was last modified. | 1.3.6.1.4.1.5624.1.2.55.1.5.11 | TimeStamp | read-only | current |
| etsysCosIrlReferenceMappingTable OBJECT-TYPE A table containing the user defined mappings of the inbound-rate-limiter-refences found in the etsysCosTable to actual inbound-rate-limiters associated with the specified port-group. | 1.3.6.1.4.1.5624.1.2.55.1.5.12 | not-accessible | current | |
| etsysCosIrlReferenceMappingEntry OBJECT-TYPE Conceptually defines a particular entry within the etsysCosIrlReferenceMappingTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | 1.3.6.1.4.1.5624.1.2.55.1.5.12.1 | not-accessible | current | |
| etsysCosIrlResourceIrlNumber OBJECT-TYPE The inbound rate limiter bond to this reference. | 1.3.6.1.4.1.5624.1.2.55.1.5.12.1.1 | Integer32 (-1 | 0..32767) | read-write | current |
| etsysCosIrlViolationClearTable OBJECT-TYPE This object SHALL always read false. Setting this object to true removes all existing entries from the etsysCosIrlViolationTable. | 1.3.6.1.4.1.5624.1.2.55.1.5.13 | TruthValue | read-write | current |
| etsysCosIrlViolationLastChange OBJECT-TYPE The time at which the etsysCosIrlViolationTable was last modified. | 1.3.6.1.4.1.5624.1.2.55.1.5.14 | TimeStamp | read-only | current |
| etsysCosIrlDisabledPortsList OBJECT-TYPE The list of dot1dBridge ports disabled as a result of limiting violation. A set to this list will clear the violation status of any port which has a corresponding clear bit in the list. | 1.3.6.1.4.1.5624.1.2.55.1.5.15 | PortList | read-write | current |
| etsysCosIrlViolationTable OBJECT-TYPE A table containing the list of entries of all dot1dBridge ports that have detected violations of the limiters current settings. | 1.3.6.1.4.1.5624.1.2.55.1.5.16 | not-accessible | current | |
| etsysCosIrlViolationEntry OBJECT-TYPE Conceptually defines a particular entry within the etsysCosIrlViolationTable. | 1.3.6.1.4.1.5624.1.2.55.1.5.16.1 | not-accessible | current | |
| etsysCosIrlPortIndex OBJECT-TYPE The dot1dBridge port on which this violation occurred. | 1.3.6.1.4.1.5624.1.2.55.1.5.16.1.1 | Integer32 (0..32767) | not-accessible | current |
| etsysCosIrlViolation OBJECT-TYPE This object represents the violation status for this limiter. If this object reads true(1) the action associated with this Irl have been taken. | 1.3.6.1.4.1.5624.1.2.55.1.5.16.1.2 | TruthValue | read-only | current |
| etsysCosIrlCounter OBJECT-TYPE In order for this object to have meaningful information the assigned limiter must be set up as a counter type limiter. This value shall then represent the number of configured units the limiter has recorded. If the associated limiter is of type pps(1) then the object represents the packets counted, otherwise it represents the octets counted. | 1.3.6.1.4.1.5624.1.2.55.1.5.16.1.3 | Counter64 | read-only | current |
| etsysCosIrlResetFlags OBJECT-TYPE This value shall always read as 0. This object clears the statistics gathering portion of this entry. If bit 0 is set, the etsysCosIrlViolation TruthValue will be reset to false. If bit 1 is set, the etsysCosIrlUnitCounter will be reset to zero. Both bits set shall clear both properties. | 1.3.6.1.4.1.5624.1.2.55.1.5.16.1.4 | EtsysRateLimitResetBits | read-write | current |
| etsysCosOrl OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.55.1.6 | |||
| etsysCosOrlPortTypeMaxEntries OBJECT-TYPE The actual number of distinctly unique (as defined by the set of shared outbound RateLimiting capabilities) port types available for configuration on this agent. | 1.3.6.1.4.1.5624.1.2.55.1.6.1 | Unsigned32 | read-only | current |
| etsysCosOrlPortTypeTable OBJECT-TYPE A table defining the distinctly unique IRL characteristics of a group of ports. | 1.3.6.1.4.1.5624.1.2.55.1.6.2 | not-accessible | current | |
| etsysCosOrlPortTypeEntry OBJECT-TYPE Conceptually defines a particular entry within the etsysCosOrlPortTypeTable. | 1.3.6.1.4.1.5624.1.2.55.1.6.2.1 | not-accessible | current | |
| etsysCosOrlPortTypeIndex OBJECT-TYPE The port type associated with the unique set of ports sharing these capabilities. | 1.3.6.1.4.1.5624.1.2.55.1.6.2.1.1 | Integer32 (0..32767) | not-accessible | current |
| etsysCosOrlPortTypeDescr OBJECT-TYPE The textual description that represents this set of dot1dBridge ports. | 1.3.6.1.4.1.5624.1.2.55.1.6.2.1.2 | SnmpAdminString | read-only | current |
| etsysCosOrlPortTypeEligiblePorts OBJECT-TYPE The list of dot1dBridge ports belonging (having the same capabilities) to this port type. | 1.3.6.1.4.1.5624.1.2.55.1.6.2.1.3 | PortList | read-only | current |
| etsysCosOrlPortTypeUnselectedPorts OBJECT-TYPE The list of dot1dBridge ports not yet bound to a user created row (port group) in the etsysCosOrlPortGroupTable. | 1.3.6.1.4.1.5624.1.2.55.1.6.2.1.4 | PortList | read-only | current |
| etsysCosOrlPortTypeNumberOfORLs OBJECT-TYPE The maximum number of outbound rate limiters supported by this agent on this type of port. | 1.3.6.1.4.1.5624.1.2.55.1.6.2.1.5 | Integer32 (0..65535) | read-only | current |
| etsysCosOrlPortTypeSupportedRateTypes OBJECT-TYPE The rate types available on this type of port. | 1.3.6.1.4.1.5624.1.2.55.1.6.2.1.6 | EtsysCosRateTypes | read-only | current |
| etsysCosOrlPortTypeCapabilities OBJECT-TYPE The EtsysCosRlCapabilities available on this type of port. | 1.3.6.1.4.1.5624.1.2.55.1.6.2.1.7 | EtsysCosRlCapabilities | read-only | current |
| etsysCosOrlUnitTable OBJECT-TYPE A table containing the rate type, minimum and maximum limits of the port groups and their respective granularity. | 1.3.6.1.4.1.5624.1.2.55.1.6.3 | not-accessible | current | |
| etsysCosOrlUnitEntry OBJECT-TYPE Conceptually defines a particular entry within the etsysCosOrlUnitTable. Entries in this table indicate the port group boundaries for the type of port specified. | 1.3.6.1.4.1.5624.1.2.55.1.6.3.1 | not-accessible | current | |
| etsysCosOrlUnitTypeIndex OBJECT-TYPE The unit identifier for this port type. The metric at which the etsysCosOrlUnitMinRate, etsysCosOrlUnitMaxRate and etsysCosOrlUnitGranularity are applied. | 1.3.6.1.4.1.5624.1.2.55.1.6.3.1.1 | EtsysCosRateTypes | not-accessible | current |
| etsysCosOrlUnitMaxRate OBJECT-TYPE The maximum rate supported at the rate of units specified by etsysCosOrlUnitType. | 1.3.6.1.4.1.5624.1.2.55.1.6.3.1.2 | Unsigned32 | read-only | current |
| etsysCosOrlUnitMinRate OBJECT-TYPE The minimum rate supported at the rate of units specified by etsysCosOrlUnitType. | 1.3.6.1.4.1.5624.1.2.55.1.6.3.1.3 | Unsigned32 | read-only | current |
| etsysCosOrlUnitGranularity OBJECT-TYPE The smallest unit by which a rate can be modified. | 1.3.6.1.4.1.5624.1.2.55.1.6.3.1.4 | Unsigned32 | read-only | current |
| etsysCosOrlPortGroupMaxEntries OBJECT-TYPE The maximum number of port groups supported by this agent. | 1.3.6.1.4.1.5624.1.2.55.1.6.4 | Unsigned32 | read-only | current |
| etsysCosOrlPortGroupNumEntries OBJECT-TYPE The number of assigned dot1dBridge port groups present in this agent. This number also reflects the port groups with a default system setup indicated by a zero(0) index. | 1.3.6.1.4.1.5624.1.2.55.1.6.5 | Gauge32 | read-only | current |
| etsysCosOrlPortGroupLastChange OBJECT-TYPE The time at which the etsysCosOrlPortTypeTable was last modified. | 1.3.6.1.4.1.5624.1.2.55.1.6.6 | TimeStamp | read-only | current |
| etsysCosOrlPortGroupTable OBJECT-TYPE A table containing the settings for specific types of dot1dBridge ports and their matching outbound rate limiting configurations. | 1.3.6.1.4.1.5624.1.2.55.1.6.7 | not-accessible | current | |
| etsysCosOrlPortGroupEntry OBJECT-TYPE Conceptually defines a particular entry within the etsysCosOrlPortTypeTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | 1.3.6.1.4.1.5624.1.2.55.1.6.7.1 | not-accessible | current | |
| etsysCosOrlPortGroupIndex OBJECT-TYPE The user-specified port group for which the settings are defined. This value MAY have meaning to the user for the purposes of identifying groups of dot1dBridge ports with similar function (uplink, user, etc). A value of zero(0) has special meaning in that it identifies the default port grouping of characteristics present in the agent. Entries indexed by a zero have a max-access of read-only. This value will have a system defined maximum of etsysCosOrlPortGroupMaxEntries. | 1.3.6.1.4.1.5624.1.2.55.1.6.7.1.1 | Integer32 (0 | 1..32767) | not-accessible | current |
| etsysCosOrlPortGroupRowStatus OBJECT-TYPE This object allows for the dynamic creation and deletion of entries within the etsysCosOrlPortGroupTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. When this object's value is active(1) the specified dot1dBridge ports listed in the PortGroupList shall be removed from UnselectedPorts. A row in transition to the active(1) state will have its port group list validated before activation. A port list that cannot be made active MUST result in the row state to become notReady(3) and no configuration action will be taken for this row. Rows not in the active(1) state SHALL NOT be persisted across entity resets and MUST return the ports from its port group list to the etsysCosOrlPortTypeUnselectedPorts. When this object's value is set to destroy(6) from an active(1) state, all dot1dBridge ports contained in etsysCosOrlPortGroupList shall be returned to the etsysCosOrlPortTypeUnselectedPorts and all entries referencing this row shall be removed as well. | 1.3.6.1.4.1.5624.1.2.55.1.6.7.1.2 | RowStatus | read-create | current |
| etsysCosOrlPortGroupList OBJECT-TYPE The list of dot1dBridge ports to be assigned to this group. Ports in this list MUST : o Be mutually exclusive from other entries in this table o Be comprised of the same port type as defined by the etsysCosOrlPortTypeIndex. | 1.3.6.1.4.1.5624.1.2.55.1.6.7.1.3 | PortList | read-write | current |
| etsysCosOrlPortGroupName OBJECT-TYPE The administratively assigned textual description of this port group. | 1.3.6.1.4.1.5624.1.2.55.1.6.7.1.4 | SnmpAdminString | read-write | current |
| etsysCosOrlPortCfgTable OBJECT-TYPE A table containing the outbound rate limiting configurations to be used in the entries specified. Rows in this table are populated based on rowCreation in the etsysCosOrlPortGroupTable. Changes to this table are reflected in the etsysCosTxqPortGroupLastChange value. | 1.3.6.1.4.1.5624.1.2.55.1.6.8 | not-accessible | current | |
| etsysCosOrlPortCfgEntry OBJECT-TYPE Conceptually defines a particular entry within the etsysCosOrlPortCfgTable. Details contained within this entry will depict the outbound rate limiter's reception rate and parent rate limiter. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | 1.3.6.1.4.1.5624.1.2.55.1.6.8.1 | not-accessible | current | |
| etsysCosOrlPortCfgFloodLimiter OBJECT-TYPE This object will represent the etsysCosOrlResourceNum to be used to limit flooded traffic. | 1.3.6.1.4.1.5624.1.2.55.1.6.8.1.2 | Integer32 (-1 | 0..65535) | read-write | current |
| etsysCosOrlResourceTable OBJECT-TYPE A table containing the outbound rate limiting configurations to be used in the entries specified. | 1.3.6.1.4.1.5624.1.2.55.1.6.9 | not-accessible | current | |
| etsysCosOrlResourceEntry OBJECT-TYPE Conceptually defines a particular entry within the etsysCosOrlResourceTable. These entries contain the specific attributes of policing rates (traffic clipping) and parent rate limiter. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | 1.3.6.1.4.1.5624.1.2.55.1.6.9.1 | not-accessible | current | |
| etsysCosOrlResourceOrlNum OBJECT-TYPE The outbound rate limiter number associated with this entry. | 1.3.6.1.4.1.5624.1.2.55.1.6.9.1.1 | Unsigned32 | not-accessible | current |
| etsysCosOrlResourceUnits OBJECT-TYPE Identifies the unit size for the etsysCosOrlPortRate. Values MUST NOT exceed the capacity of the etsysCosOrlPortType they are associated with. | 1.3.6.1.4.1.5624.1.2.55.1.6.9.1.2 | EtsysCosRateTypes | read-write | current |
| etsysCosOrlResourceRate OBJECT-TYPE Identifies the number of units above which packets will considered in violation. This object is read-only for limiters of type count(5). The value (0) shall carry special meaning in this case of unset. Rate limiters identified as having a value of (0) shall not have this settings applied to the limiter. | 1.3.6.1.4.1.5624.1.2.55.1.6.9.1.3 | Integer32 (0 | 1..2147483647) | read-write | current |
| etsysCosOrlResourceParentOrl OBJECT-TYPE Setting this object to a positive value indicates the etsysCosOrlResourceOrlNum to be used in conjunction with this setting. A value of (-1) indicates the parent Orl is not configured. | 1.3.6.1.4.1.5624.1.2.55.1.6.9.1.4 | Integer32 | read-write | current |
| etsysCosOrlResourceType OBJECT-TYPE The characteristics applied to this rate limiter. When chaining limiters is used, the AND / OR attribute denotes the limiter logic in handling violation. For example, option rePrioritizeAnd(2) requires that the current limiter AND it's parent be violated for the packet to be reprioritized. The rePrioritizeOr(3) option only needs one OR the other to be violated for the action to be taken. | 1.3.6.1.4.1.5624.1.2.55.1.6.9.1.5 | EtsysRateLimitingType | read-write | current |
| etsysCosOrlResourceActionCosIndex OBJECT-TYPE This object will represent the CoS to be applied to packets in violation of the limits set when the etsysCosOrlResourceType is set to one of the rePrioritize types. | 1.3.6.1.4.1.5624.1.2.55.1.6.9.1.6 | Integer32 | read-write | current |
| etsysCosOrlResourceAction OBJECT-TYPE This object allows syslog, SNMP traps, or disabling actions to be taken limiters are first exceeded. | 1.3.6.1.4.1.5624.1.2.55.1.6.9.1.7 | EtsysViolationAction | read-write | current |
| etsysCosOrlResourceViolationPortList OBJECT-TYPE The dot1dBridge ports this limiter has been violated on. Writing this object will clear the dot1dBridge ports given which have a corresponding bit of zero (0) in the PortList. | 1.3.6.1.4.1.5624.1.2.55.1.6.9.1.8 | PortList | read-write | current |
| etsysCosOrlResourceClearCounters OBJECT-TYPE This object shall always read false(2). When set to true(1) this object clears the counter associated with this entry, if the associated entry is a limiter of type count(5). | 1.3.6.1.4.1.5624.1.2.55.1.6.9.1.9 | TruthValue | read-write | current |
| etsysCosOrlReferenceMappingMaxReference OBJECT-TYPE The maximum number of etsysCosOrlReferences allowed in the etsysCosOrlMappingTable. | 1.3.6.1.4.1.5624.1.2.55.1.6.10 | Unsigned32 | read-only | current |
| etsysCosOrlReferenceMappingLastChange OBJECT-TYPE The time at which the etsysCosOrlReferenceMappingTable was last modified. | 1.3.6.1.4.1.5624.1.2.55.1.6.11 | TimeStamp | read-only | current |
| etsysCosOrlReferenceMappingTable OBJECT-TYPE A table containing the user defined mappings of the outbound-rate-limiter-refences found in the etsysCosTable to actual outbound-rate-limiters associated with the specified port-group. | 1.3.6.1.4.1.5624.1.2.55.1.6.12 | not-accessible | current | |
| etsysCosOrlReferenceMappingEntry OBJECT-TYPE Conceptually defines a particular entry within the etsysCosOrlReferenceMappingTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | 1.3.6.1.4.1.5624.1.2.55.1.6.12.1 | not-accessible | current | |
| etsysCosOrlResourceOrlNumber OBJECT-TYPE The outbound rate limiter bond to this reference. | 1.3.6.1.4.1.5624.1.2.55.1.6.12.1.1 | Integer32 (-1 | 0..32767) | read-write | current |
| etsysCosOrlViolationClearTable OBJECT-TYPE This object SHALL always read false. Setting this object to true removes all existing entries from the etsysCosOrlViolationTable. | 1.3.6.1.4.1.5624.1.2.55.1.6.13 | TruthValue | read-write | current |
| etsysCosOrlViolationLastChange OBJECT-TYPE The time at which the etsysCosOrlViolationTable was last modified. | 1.3.6.1.4.1.5624.1.2.55.1.6.14 | TimeStamp | read-only | current |
| etsysCosOrlDisabledPortsList OBJECT-TYPE The list of dot1dBridge ports disabled as a result of limiting violation. A set to this list will clear the violation status of any port which has a corresponding clear bit in the list. | 1.3.6.1.4.1.5624.1.2.55.1.6.15 | PortList | read-write | current |
| etsysCosOrlViolationTable OBJECT-TYPE A table containing the list of entries of all dot1dBridge ports that have detected violations of the limiters current settings. | 1.3.6.1.4.1.5624.1.2.55.1.6.16 | not-accessible | current | |
| etsysCosOrlViolationEntry OBJECT-TYPE Conceptually defines a particular entry within the etsysCosOrlViolationTable. | 1.3.6.1.4.1.5624.1.2.55.1.6.16.1 | not-accessible | current | |
| etsysCosOrlPortIndex OBJECT-TYPE The dot1dBridge port on which this violation occurred. | 1.3.6.1.4.1.5624.1.2.55.1.6.16.1.1 | Integer32 (0..32767) | not-accessible | current |
| etsysCosOrlViolation OBJECT-TYPE This object represents the violation status for this limiter. If this object reads true(1) the action associated with this Orl have been taken. | 1.3.6.1.4.1.5624.1.2.55.1.6.16.1.2 | TruthValue | read-only | current |
| etsysCosOrlCounter OBJECT-TYPE In order for this object to have meaningful information the assigned limiter must be set up as a counter type limiter. This value shall then represent the number of configured units the limiter has recorded. If the associated limiter is of type pps(0) then the object represents the packets counted, otherwise it represents the octets counted. | 1.3.6.1.4.1.5624.1.2.55.1.6.16.1.3 | Counter64 | read-only | current |
| etsysCosOrlResetFlags OBJECT-TYPE This value shall always read as 0. This object clears the statistics gathering portion of this entry. If bit 0 is set, the etsysCosOrlViolation TruthValue will be reset to false. If bit 1 is set, the etsysCosOrlUnitCounter will be reset to zero. Both bits set shall clear both properties. | 1.3.6.1.4.1.5624.1.2.55.1.6.16.1.4 | EtsysRateLimitResetBits | read-write | current |
| etsysCosFloodControl OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.55.1.7 | |||
| etsysCosFloodCtrlPortTypeMaxEntries OBJECT-TYPE The actual number of distinctly unique (as defined by the set of shared flooded RateLimiting capabilities) port types available for configuration on this agent. | 1.3.6.1.4.1.5624.1.2.55.1.7.1 | Unsigned32 | read-only | current |
| etsysCosFloodCtrlPortTypeTable OBJECT-TYPE A table defining the distinctly unique Broadcast Rate Limiting characteristics of a group of ports. | 1.3.6.1.4.1.5624.1.2.55.1.7.2 | not-accessible | current | |
| etsysCosFloodCtrlPortTypeEntry OBJECT-TYPE Conceptually defines a particular entry within the etsysCosFloodCtrlPortTypeTable. | 1.3.6.1.4.1.5624.1.2.55.1.7.2.1 | not-accessible | current | |
| etsysCosFloodCtrlPortTypeIndex OBJECT-TYPE The port type associated with the unique set of ports sharing these capabilities. | 1.3.6.1.4.1.5624.1.2.55.1.7.2.1.1 | Integer32 (0..32767) | accessible-for-notify | current |
| etsysCosFloodCtrlPortTypeDescr OBJECT-TYPE The textual description that represents this set of dot1dBridge ports. | 1.3.6.1.4.1.5624.1.2.55.1.7.2.1.2 | SnmpAdminString | read-only | current |
| etsysCosFloodCtrlPortTypeEligiblePorts OBJECT-TYPE The list of dot1dBridge ports belonging (having the same capabilities) to this port type. | 1.3.6.1.4.1.5624.1.2.55.1.7.2.1.3 | PortList | read-only | current |
| etsysCosFloodCtrlPortTypeUnselectedPorts OBJECT-TYPE The list of dot1dBridge ports not yet bound to a user created row (port group) in the etsysCosFloodCtrlPortGroupTable. | 1.3.6.1.4.1.5624.1.2.55.1.7.2.1.4 | PortList | read-only | current |
| etsysCosFloodCtrlPortTypeSupportedRateTypes OBJECT-TYPE The rate types available on this type of port. | 1.3.6.1.4.1.5624.1.2.55.1.7.2.1.5 | EtsysCosRateTypes | read-only | current |
| etsysCosFloodCtrlPortTypeCapabilities OBJECT-TYPE The EtsysCosRlCapabilities available on this type of port. | 1.3.6.1.4.1.5624.1.2.55.1.7.2.1.7 | EtsysCosRlCapabilities | read-only | current |
| etsysCosFloodCtrlUnitTable OBJECT-TYPE A table containing the rate type, minimum and maximum limits of the port groups and their respective granularity. | 1.3.6.1.4.1.5624.1.2.55.1.7.3 | not-accessible | current | |
| etsysCosFloodCtrlUnitEntry OBJECT-TYPE Conceptually defines a particular entry within the etsysCosFloodCtrlUnitTable. Entries in this table indicate the port group boundaries for the type of port specified. | 1.3.6.1.4.1.5624.1.2.55.1.7.3.1 | not-accessible | current | |
| etsysCosFloodCtrlUnitTypeIndex OBJECT-TYPE The unit identifier for this port type. The metric at which the etsysCosFloodCtrlUnitMinRate, etsysCosFloodCtrlUnitMaxRate and etsysCosFloodCtrlUnitGranularity are applied. | 1.3.6.1.4.1.5624.1.2.55.1.7.3.1.1 | EtsysCosRateTypes | not-accessible | current |
| etsysCosFloodCtrlUnitMaxRate OBJECT-TYPE The maximum rate supported at the rate of units specified by etsysCosFloodCtrlUnitTypeIndex. | 1.3.6.1.4.1.5624.1.2.55.1.7.3.1.2 | Unsigned32 | read-only | current |
| etsysCosFloodCtrlUnitMinRate OBJECT-TYPE The minimum rate supported at the rate of units specified by etsysCosFloodCtrlUnitTypeIndex. | 1.3.6.1.4.1.5624.1.2.55.1.7.3.1.3 | Unsigned32 | read-only | current |
| etsysCosFloodCtrlUnitGranularity OBJECT-TYPE The smallest unit by which a rate can be modified. | 1.3.6.1.4.1.5624.1.2.55.1.7.3.1.4 | Unsigned32 | read-only | current |
| etsysCosFloodCtrlPortGroupMaxEntries OBJECT-TYPE The maximum number of port groups supported by this agent. | 1.3.6.1.4.1.5624.1.2.55.1.7.4 | Unsigned32 | read-only | current |
| etsysCosFloodCtrlPortGroupNumEntries OBJECT-TYPE The number of assigned dot1dBridge port groups present in this agent. This number also reflects the port groups with a default system setup indicated by a zero(0) index. | 1.3.6.1.4.1.5624.1.2.55.1.7.5 | Gauge32 | read-only | current |
| etsysCosFloodCtrlPortGroupLastChange OBJECT-TYPE The time at which the etsysCosFloodCtrlPortTypeTable was last modified. | 1.3.6.1.4.1.5624.1.2.55.1.7.6 | TimeStamp | read-only | current |
| etsysCosFloodCtrlPortGroupTable OBJECT-TYPE A table containing the settings for specific types of dot1dBridge ports and their matching flooded rate limiting configurations. | 1.3.6.1.4.1.5624.1.2.55.1.7.7 | not-accessible | current | |
| etsysCosFloodCtrlPortGroupEntry OBJECT-TYPE Conceptually defines a particular entry within the etsysCosFloodCtrlPortTypeTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | 1.3.6.1.4.1.5624.1.2.55.1.7.7.1 | not-accessible | current | |
| etsysCosFloodCtrlPortGroupIndex OBJECT-TYPE The user-specified port group for which the settings are defined. This value MAY have meaning to the user for the purposes of identifying groups of dot1dBridge ports with similar function (uplink, user, etc). A value of zero(0) has special meaning in that it identifies the default port grouping of characteristics present in the agent. Entries indexed by a zero have a max-access of read-only. This value will have a system defined maximum of etsysCosFloodCtrlPortGroupMaxEntries. | 1.3.6.1.4.1.5624.1.2.55.1.7.7.1.1 | Integer32 (0 | 1..32767) | accessible-for-notify | current |
| etsysCosFloodCtrlPortGroupRowStatus OBJECT-TYPE This object allows for the dynamic creation and deletion of entries within the etsysCosFloodCtrlPortGroupTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. When this object's value is active(1) the specified dot1dBridge ports listed in the PortGroupList shall be removed from UnselectedPorts. A row in transition to the active(1) state will have its port group list validated before activation. A port list that cannot be made active MUST result in the row state to become notReady(3) and no configuration action will be taken for this row. Rows not in the active(1) state SHALL NOT be persisted across entity resets and MUST return the ports from its port group list to the etsysCosFloodCtrlPortTypeUnselectedPorts. When this object's value is set to destroy(6) from an active(1) state, all dot1dBridge ports contained in etsysCosFloodCtrlPortGroupList shall be returned to the etsysCosFloodCtrlPortTypeUnselectedPorts and all entries referencing this row shall be removed as well. | 1.3.6.1.4.1.5624.1.2.55.1.7.7.1.2 | RowStatus | read-create | current |
| etsysCosFloodCtrlPortGroupList OBJECT-TYPE The list of dot1dBridge ports to be assigned to this group. Ports in this list MUST : o Be mutually exclusive from other entries in this table o Be comprised of the same port type as defined by the etsysCosFloodCtrlPortTypeIndex. | 1.3.6.1.4.1.5624.1.2.55.1.7.7.1.3 | PortList | read-write | current |
| etsysCosFloodCtrlPortGroupName OBJECT-TYPE The administratively assigned textual description of this port group. | 1.3.6.1.4.1.5624.1.2.55.1.7.7.1.4 | SnmpAdminString | read-write | current |
| etsysCosFloodCtrlSyslogActionMsgFormat OBJECT-TYPE This object controls the format of syslog messages sent in response to a flood rate limit being violated. A value of notification(1) causes the syslog message to provide the index of the violated limiter and the port(s) that the violation occurred on. A value of notificationWithPktHdr(2) causes the syslog message to provide the first 64 bytes of the violating packet in addition to the information provided by notification(1). | 1.3.6.1.4.1.5624.1.2.55.1.7.8 | INTEGER {notification(1), notificationWithPktHdr(2)} | read-write | current |
| etsysCosFloodCtrlResourceTable OBJECT-TYPE A table containing the inbound rate limiting configurations to be used in the entries specified. | 1.3.6.1.4.1.5624.1.2.55.1.7.9 | not-accessible | current | |
| etsysCosFloodCtrlResourceEntry OBJECT-TYPE Conceptually defines a particular entry within the etsysCosFloodCtrlResourceTable. These entries contain the specific attributes of flood policing rates (traffic clipping). Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | 1.3.6.1.4.1.5624.1.2.55.1.7.9.1 | not-accessible | current | |
| etsysCosFloodCtrlFloodType OBJECT-TYPE The type of received traffic that rate limited based on this row entries configured limits. | 1.3.6.1.4.1.5624.1.2.55.1.7.9.1.1 | INTEGER {unicastUnknown(1), multicast(2), broadcast(3)} | accessible-for-notify | current |
| etsysCosFloodCtrlResourceUnits OBJECT-TYPE Identifies the unit size for the etsysCosFloodCtrlPortRate. Values MUST NOT exceed the capacity of the etsysCosFloodCtrlPortType they are associated with. | 1.3.6.1.4.1.5624.1.2.55.1.7.9.1.2 | EtsysCosRateTypes | read-write | current |
| etsysCosFloodCtrlResourceRate OBJECT-TYPE Identifies the number of units above which packets will considered in violation. The value (0) shall carry special meaning in this case of unset. Rate limiters identified as having a value of (0) shall not have this settings applied to the limiter. | 1.3.6.1.4.1.5624.1.2.55.1.7.9.1.3 | Integer32 (0 | 1..2147483647) | read-write | current |
| etsysCosFloodCtrlResourceAction OBJECT-TYPE This object allows packet dropping, syslog, SNMP traps, or disabling actions to be taken limiters are first exceeded. It is permissible for no actions to be specified, which effectively disables the limiter. | 1.3.6.1.4.1.5624.1.2.55.1.7.9.1.4 | Bits {drop(0), syslog(1), trap(2), disable(3)} | read-write | current |
| etsysCosFloodCtrlResourceViolationPortList OBJECT-TYPE The dot1dBridge ports this limiter has been violated on. Writing this object will clear the dot1dBridge ports given which have a corresponding bit of zero (0) in the PortList. | 1.3.6.1.4.1.5624.1.2.55.1.7.9.1.5 | PortList | read-write | current |
| etsysCosFloodCtrlResourceClearCounters OBJECT-TYPE This object shall always read false(2). When set to true(1) this object clears the counter associated with this entry. | 1.3.6.1.4.1.5624.1.2.55.1.7.9.1.6 | TruthValue | read-write | current |
| etsysCosFloodCtrlViolationClearTable OBJECT-TYPE This object SHALL always read false. Setting this object to true removes all existing entries from the etsysCosFloodCtrlViolationTable. | 1.3.6.1.4.1.5624.1.2.55.1.7.10 | TruthValue | read-write | current |
| etsysCosFloodCtrlViolationLastChange OBJECT-TYPE The time at which the etsysCosFloodCtrlViolationTable was last modified. | 1.3.6.1.4.1.5624.1.2.55.1.7.11 | TimeStamp | read-only | current |
| etsysCosFloodCtrlDisabledPortsList OBJECT-TYPE The list of dot1dBridge ports disabled as a result of limiting violation. A set to this list will clear the violation status of any port which has a corresponding clear bit in the list. | 1.3.6.1.4.1.5624.1.2.55.1.7.12 | PortList | read-write | current |
| etsysCosFloodCtrlViolationTable OBJECT-TYPE A table containing the list of entries of all dot1dBridge ports that have detected violations of the limiters current settings. | 1.3.6.1.4.1.5624.1.2.55.1.7.13 | not-accessible | current | |
| etsysCosFloodCtrlViolationEntry OBJECT-TYPE Conceptually defines a particular entry within the etsysCosFloodCtrlViolationTable. | 1.3.6.1.4.1.5624.1.2.55.1.7.13.1 | not-accessible | current | |
| etsysCosFloodCtrlViolation OBJECT-TYPE This object represents the violation status for this limiter. If this object reads true(1) the action associated with this FloodCtrl have been taken. | 1.3.6.1.4.1.5624.1.2.55.1.7.13.1.1 | TruthValue | read-only | current |
| etsysCosFloodCtrlCounter OBJECT-TYPE The number of configured units the limiter has recorded. If the associated limiter is of type pps(1) then the object represents the packets counted, otherwise it represents the octets counted. | 1.3.6.1.4.1.5624.1.2.55.1.7.13.1.2 | Counter64 | read-only | current |
| etsysCosFloodCtrlResetFlags OBJECT-TYPE This value shall always read as BITS contstruct with no bit set. This object clears the statistics gathering portion of this entry. If bit 0 is set, the etsysCosFloodCtrlViolation TruthValue will be reset to false(2). If bit 1 is set, the etsysCosFloodCtrlUnitCounter will be reset to zero. Setting both bits simultaneously shall clear both properties. | 1.3.6.1.4.1.5624.1.2.55.1.7.13.1.3 | EtsysRateLimitResetBits | read-write | current |
| etsysCosConformance OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.55.2 | |||
| etsysCosGroups OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.55.2.1 | |||
| etsysCosCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.55.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| etsysCosIrlExceededNotification NOTIFICATION-TYPE This notification indicates an inbound limiter has been exceeded. | 1.3.6.1.4.1.5624.1.2.55.1.0.1 | current |
| etsysCosOrlExceededNotification NOTIFICATION-TYPE This notification indicates an outbound limiter has been exceeded. | 1.3.6.1.4.1.5624.1.2.55.1.0.2 | current |
| etsysCosFloodLimitExceededNotification NOTIFICATION-TYPE This notification indicates an inbound flood limiter has been exceeded. | 1.3.6.1.4.1.5624.1.2.55.1.0.3 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| etsysCosMasterResetGroup OBJECT-GROUP A collection of objects providing a mechanism of resetting all objects back to an unconfigured state. | 1.3.6.1.4.1.5624.1.2.55.2.1.1 | current |
| etsysCosCapabilitiesGroup OBJECT-GROUP A collection of objects providing the capability extent for the agent supporting this MIB. | 1.3.6.1.4.1.5624.1.2.55.2.1.2 | current |
| etsysCosGroup OBJECT-GROUP A collection of objects providing the support capacity and capability extent for the agent supporting this MIB. The object etsysCosDropPrecedence is part of a required group however its access may be restricted to read-only for agents without the ability to support this feature and still wish to implement this MIB. | 1.3.6.1.4.1.5624.1.2.55.2.1.3 | current |
| etsysCosTxqGroup OBJECT-GROUP A collection of objects required for creating and modifying settings for transmit queue configurations. | 1.3.6.1.4.1.5624.1.2.55.2.1.4 | current |
| etsysCosIrlGroup OBJECT-GROUP A collection of objects required for creating and modifying settings for inbound rate limiter configurations. | 1.3.6.1.4.1.5624.1.2.55.2.1.5 | current |
| etsysCosOrlGroup OBJECT-GROUP A collection of objects required for creating and modifying settings for outbound rate limiter configurations. | 1.3.6.1.4.1.5624.1.2.55.2.1.6 | current |
| etsysCosNotificationGroup NOTIFICATION-GROUP A collection of objects required for reporting rate limiter violations. | 1.3.6.1.4.1.5624.1.2.55.2.1.7 | current |
| etsysCosCompliance MODULE-COMPLIANCE The compliance statement for devices that support Enterasys class of service. | 1.3.6.1.4.1.5624.1.2.55.2.2.1 | current |