EKINOPS-MGNT2-NMS-MIB
- Registered at
- 1.3.6.1.4.1.20044.1000
- Last updated
- 2015-11-12 00:00
- Organization
- Ekinops
- Revisions
- 2009-07-26 15:00, 2015-04-13 00:00, 2015-11-12 00:00, 2016-06-06 00:00
- Namespace
- ekinops
- Source file
EKINOPS-MGNT2-NMS-MIB- Digest
sha256:85e8b35216fe48916e8cfe86176ec5602707bed6a879ac6952fbe77c4506657a
Description
MIB for managing Ekinops 360 Network Element via a NMS.
Contact
Ekinops 3, rue Blaise Pascal F-22300 Lannion / FRANCE Tel : +33 (0)2 96 05 00 30 Fax : +33 (0)2 96 48 62 39 E-mail: support@ekinops.fr
Imports
| From | Symbols |
|---|---|
| EKINOPS-MIB | EkiOnOff, ekinops |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, RowStatus, TEXTUAL-CONVENTION |
| SNMPv2-TM | SnmpUDPAddress |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
EKINOPS-MGNT2-NMS-MIB EKINOPS-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC SNMPv2-TM
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| Mgnt2AlmProbableCause TEXTUAL-CONVENTION This object is used to specify the OID of the probable cause of the generated notification. | current | |||
| Mgnt2AlmSeverity TEXTUAL-CONVENTION The value of this object identifies the severity of an alarm stored in alarm Table. The cleared severity is not foreseen inside APT table. | current | |||
| Mgnt2AlmType TEXTUAL-CONVENTION The value of this object identifies the type of an alarm stored in alarm Table. | current | |||
| Mgnt2DownloadFileType TEXTUAL-CONVENTION This object indicates the the file type to download/upload. | current | |||
| Mgnt2EventSourceType TEXTUAL-CONVENTION This object indicates the event source. | current | |||
| Mgnt2EventType TEXTUAL-CONVENTION The value of this object identifies the type of an event stored in event log Table. | current | |||
| Mgnt2LacState TEXTUAL-CONVENTION This is the State attribute for the Local Access Control. This attribute can be set: - by Agent at creation time to accessRequested - by EML to the values accessGranted or accessDenied | current | |||
| Mgnt2NotificationId TEXTUAL-CONVENTION This object contains a unique event/alarm numbering. | current | |||
| Mgnt2ObjectClassId TEXTUAL-CONVENTION This object represents the SNMP entry table object identity (Managed Object Class) of the instance where the event/alarm occured. | current | |||
| Mgnt2ServerAddress TEXTUAL-CONVENTION This textual convention define a server adress. It can be either only the IP address of the server if server is running on default port. ex : '10.0.17.57' or IP adress and server port separated by ':' allowing to connect a server running on unusual port. ex : '10.0.17.57:5041' | current | |||
| Mgnt2SoftwareDownloadActionStatus TEXTUAL-CONVENTION This object indicates the upload/download error code. | current | |||
| Mgnt2UploadDownloadActionStatus TEXTUAL-CONVENTION This object indicates the download status and allow to start download. | current | |||
| Mgnt2UploadDownloadErrorCode TEXTUAL-CONVENTION This object indicates the upload/download error code. | current | |||
| Mgnt2UploadDownloadFileCompression TEXTUAL-CONVENTION This describes the agent's capability in term of which file compression styles it supports. | current | |||
| Mgnt2UploadDownloadFileEncoding TEXTUAL-CONVENTION This describes the agent's capability in term of which file encoding styles it supports. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| mgnt2NMSMibObject OBJECT-IDENTITY | 1.3.6.1.4.1.20044.1000.1 | |||
| mgnt2ActiveAlmTable OBJECT-TYPE This table defines the MGNT2-NMS Active Alarm table This table is used by Agent in order to store the active alarms, managing system can only read them. | 1.3.6.1.4.1.20044.1000.1.1 | not-accessible | current | |
| mgnt2ActiveAlmEntry OBJECT-TYPE Information about a single alarm in the Active Alarm table. Entries in this table are created by SNMP NE and will be automatically deleted by SNMP NE when it is genereted a cleared-alarm. | 1.3.6.1.4.1.20044.1000.1.1.1 | not-accessible | current | |
| mgnt2ActiveAlmNotificationId OBJECT-TYPE See textual conventions. | 1.3.6.1.4.1.20044.1000.1.1.1.1 | Mgnt2NotificationId | read-only | current |
| mgnt2ActiveAlmProbableCause OBJECT-TYPE See textual conventions. | 1.3.6.1.4.1.20044.1000.1.1.1.2 | Mgnt2AlmProbableCause | read-only | current |
| mgnt2ActiveAlmObjectClassIdentifier OBJECT-TYPE See textual conventions. | 1.3.6.1.4.1.20044.1000.1.1.1.3 | Mgnt2ObjectClassId | read-only | current |
| mgnt2ActiveAlmSourcePm OBJECT-TYPE See textual conventions. | 1.3.6.1.4.1.20044.1000.1.1.1.4 | DisplayString | read-only | current |
| mgnt2ActiveAlmBoardNumber OBJECT-TYPE See textual conventions. | 1.3.6.1.4.1.20044.1000.1.1.1.5 | Integer32 (1..32) | read-only | current |
| mgnt2ActiveAlmSourcePortType OBJECT-TYPE This OID gives the type of the port who sent a trap | 1.3.6.1.4.1.20044.1000.1.1.1.6 | DisplayString | read-only | current |
| mgnt2ActiveAlmSourcePortNumber OBJECT-TYPE This OID gives the port number of the PM that sent the last trap | 1.3.6.1.4.1.20044.1000.1.1.1.7 | Integer32 (1..32) | read-only | current |
| mgnt2ActiveAlmSeverity OBJECT-TYPE See textual conventions. | 1.3.6.1.4.1.20044.1000.1.1.1.8 | Mgnt2AlmSeverity | read-only | current |
| mgnt2ActiveAlmSpecificProblem OBJECT-TYPE This object contains the alarm specific problem description. Indicates further refinements to the problem identified by the alarm type. If more than one specific problem is described in this object, the problem descriptions are separated by <;> characters. The format of the displayString is for further study. | 1.3.6.1.4.1.20044.1000.1.1.1.9 | DisplayString | read-only | current |
| mgnt2ActiveAlmAdditionalText OBJECT-TYPE | 1.3.6.1.4.1.20044.1000.1.1.1.10 | DisplayString | read-only | current |
| mgnt2ActiveAlmType OBJECT-TYPE See textual convention | 1.3.6.1.4.1.20044.1000.1.1.1.11 | Mgnt2AlmType | read-only | current |
| mgnt2ActiveAlmTime OBJECT-TYPE This object indicates when the alarm has been generated. | 1.3.6.1.4.1.20044.1000.1.1.1.12 | DateAndTime | read-only | current |
| mgnt2ActiveAlmNodeControllerIpAddress OBJECT-TYPE This OID gives the IP address of the Node Controller | 1.3.6.1.4.1.20044.1000.1.1.1.13 | IpAddress | read-only | current |
| mgnt2ActiveAlmChassisId OBJECT-TYPE This OID gives the chassis ID | 1.3.6.1.4.1.20044.1000.1.1.1.14 | DisplayString | read-only | current |
| mgnt2AlmLogTable OBJECT-TYPE This table defines the Alarm Log table. It is used to store the alarms generated by SNMP NE. | 1.3.6.1.4.1.20044.1000.1.2 | not-accessible | current | |
| mgnt2AlmLogEntry OBJECT-TYPE Each entry contains information about single alarm notification. Entries in this table are created automatically by Agent and they are never deleted because the Log behavior is automatically set to Wrap, hence when no more entry will be created (log full) new log entry will cause the deletion of the oldest one. | 1.3.6.1.4.1.20044.1000.1.2.1 | not-accessible | current | |
| mgnt2AlmLogNotificationId OBJECT-TYPE See textual conventions. | 1.3.6.1.4.1.20044.1000.1.2.1.1 | Mgnt2NotificationId | read-only | current |
| mgnt2AlmLogProbableCause OBJECT-TYPE See textual conventions. | 1.3.6.1.4.1.20044.1000.1.2.1.2 | Mgnt2AlmProbableCause | read-only | current |
| mgnt2AlmLogObjectClassIdentifier OBJECT-TYPE See textual conventions. | 1.3.6.1.4.1.20044.1000.1.2.1.3 | Mgnt2ObjectClassId | read-only | current |
| mgnt2AlmLogSourcePm OBJECT-TYPE See textual conventions. | 1.3.6.1.4.1.20044.1000.1.2.1.4 | DisplayString | read-only | current |
| mgnt2AlmLogBoardNumber OBJECT-TYPE See textual conventions. | 1.3.6.1.4.1.20044.1000.1.2.1.5 | Integer32 (1..32) | read-only | current |
| mgnt2AlmLogSourcePortType OBJECT-TYPE This OID gives the type of the port who sent a trap | 1.3.6.1.4.1.20044.1000.1.2.1.6 | DisplayString | read-only | current |
| mgnt2AlmLogSourcePortNumber OBJECT-TYPE This OID gives the port number of the PM that sent the last trap | 1.3.6.1.4.1.20044.1000.1.2.1.7 | Integer32 (1..32) | read-only | current |
| mgnt2AlmLogSeverity OBJECT-TYPE The perceived severity of the alarm, as specified by the agent that generated it. | 1.3.6.1.4.1.20044.1000.1.2.1.8 | Mgnt2AlmSeverity | read-only | current |
| mgnt2AlmLogSpecificProblem OBJECT-TYPE See textual conventions. This object is only present if it was included in the alarm trap corresponding to this AlarmLog entry. | 1.3.6.1.4.1.20044.1000.1.2.1.9 | DisplayString | read-only | current |
| mgnt2AlmLogAdditionalText OBJECT-TYPE | 1.3.6.1.4.1.20044.1000.1.2.1.10 | DisplayString | read-only | current |
| mgnt2AlmLogAlarmType OBJECT-TYPE | 1.3.6.1.4.1.20044.1000.1.2.1.11 | Mgnt2AlmType | read-only | current |
| mgnt2AlmLogTime OBJECT-TYPE This object indicates when the alarm has been generated. | 1.3.6.1.4.1.20044.1000.1.2.1.13 | DateAndTime | read-only | current |
| mgnt2AlmLogNodeControllerIpAddress OBJECT-TYPE This OID gives the IP address of the Node Controller | 1.3.6.1.4.1.20044.1000.1.2.1.14 | IpAddress | read-only | current |
| mgnt2AlmLogChassisId OBJECT-TYPE This OID gives the chassis ID | 1.3.6.1.4.1.20044.1000.1.2.1.15 | DisplayString | read-only | current |
| mgnt2EventLogTable OBJECT-TYPE This table contain information about single event notification not alarm. Entries in this table are created automatically by Agent and they are never deleted because the Log behavior is automatically set to Wrap, hence when no more entry will be created (log full) new log entry will cause the deletion of the oldest one. | 1.3.6.1.4.1.20044.1000.1.3 | not-accessible | current | |
| mgnt2EventLogEntry OBJECT-TYPE An entry in the mgnt2EventLogTable | 1.3.6.1.4.1.20044.1000.1.3.1 | not-accessible | current | |
| mgnt2EventLogNotificationId OBJECT-TYPE See textual conventions. | 1.3.6.1.4.1.20044.1000.1.3.1.1 | Mgnt2NotificationId | read-only | current |
| mgnt2EventLogObjectClassIdentifier OBJECT-TYPE See textual conventions. | 1.3.6.1.4.1.20044.1000.1.3.1.2 | Mgnt2ObjectClassId | read-only | current |
| mgnt2EventLogSourcePm OBJECT-TYPE See textual conventions. | 1.3.6.1.4.1.20044.1000.1.3.1.4 | DisplayString | read-only | current |
| mgnt2EventLogBoardNumber OBJECT-TYPE See textual conventions. | 1.3.6.1.4.1.20044.1000.1.3.1.5 | Integer32 (1..32) | read-only | current |
| mgnt2EventLogSourcePortType OBJECT-TYPE This OID gives the type of the port who sent a trap | 1.3.6.1.4.1.20044.1000.1.3.1.6 | DisplayString | read-only | current |
| mgnt2EventLogSourcePortNumber OBJECT-TYPE This OID gives the port number of the PM that sent the last trap | 1.3.6.1.4.1.20044.1000.1.3.1.7 | Integer32 (1..32) | read-only | current |
| mgnt2EventLogEventType OBJECT-TYPE This object describes the type of the event logged. | 1.3.6.1.4.1.20044.1000.1.3.1.8 | Mgnt2EventType | read-only | current |
| mgnt2EventLogSourceType OBJECT-TYPE This object describes the source type of the event logged. | 1.3.6.1.4.1.20044.1000.1.3.1.9 | Mgnt2EventSourceType | read-only | current |
| mgnt2EventLogReason OBJECT-TYPE | 1.3.6.1.4.1.20044.1000.1.3.1.10 | DisplayString | read-only | current |
| mgnt2EventLogAdditionalText OBJECT-TYPE | 1.3.6.1.4.1.20044.1000.1.3.1.11 | DisplayString | read-only | current |
| mgnt2EventLogTime OBJECT-TYPE This object indicates when the event has been generated. | 1.3.6.1.4.1.20044.1000.1.3.1.12 | DateAndTime | read-only | current |
| mgnt2EventLogNodeControllerIpAddress OBJECT-TYPE This OID gives the IP address of the Node Controller | 1.3.6.1.4.1.20044.1000.1.3.1.13 | IpAddress | read-only | current |
| mgnt2EventLogChassisId OBJECT-TYPE This OID gives the chassis ID | 1.3.6.1.4.1.20044.1000.1.3.1.14 | DisplayString | read-only | current |
| mgnt2UploadDownload OBJECT-IDENTITY | 1.3.6.1.4.1.20044.1000.1.5 | |||
| mgnt2UploadDownloadFilename OBJECT-TYPE software file name including eventually file path | 1.3.6.1.4.1.20044.1000.1.5.1 | DisplayString | read-write | current |
| mgnt2UploadDownloadAddress OBJECT-TYPE See textual convention | 1.3.6.1.4.1.20044.1000.1.5.2 | Mgnt2ServerAddress | read-write | current |
| mgnt2UploadDownloadLogin OBJECT-TYPE Login for ftp | 1.3.6.1.4.1.20044.1000.1.5.3 | DisplayString | read-write | current |
| mgnt2UploadDownloadPasswd OBJECT-TYPE Password for ftp. A manager sets this value with ftp account password using SNMP. For security reasons if a manager reads this entry, NE must return an empty string (instead of password). | 1.3.6.1.4.1.20044.1000.1.5.4 | DisplayString | read-write | current |
| mgnt2UploadDownloadTxRetries OBJECT-TYPE Communication retries between the Client and Server. <0> denotes one (first) transmission and no retries in case of failure no re-transmissions are required. | 1.3.6.1.4.1.20044.1000.1.5.5 | Integer32 | read-write | current |
| mgnt2UploadDownloadActionStatus OBJECT-TYPE Entry used to know status of upload/ download to start upload/download operation (Action) | 1.3.6.1.4.1.20044.1000.1.5.6 | Mgnt2UploadDownloadActionStatus | read-write | current |
| mgnt2UploadDownloadErrorCode OBJECT-TYPE See textual convention | 1.3.6.1.4.1.20044.1000.1.5.7 | Mgnt2UploadDownloadErrorCode | read-only | current |
| mgnt2UploadDownloadDirection OBJECT-TYPE FTP direction : 0 : From NE to external server 1 : From external server to NE | 1.3.6.1.4.1.20044.1000.1.5.8 | Integer32 | read-write | current |
| mgnt2UploadDownloadProgress OBJECT-TYPE Percentage of software file(s) downloaded. Only significant in case mgnt2UploadDownloadActionStatus is 'inProgress' or 'automatic' | 1.3.6.1.4.1.20044.1000.1.5.9 | Integer32 | read-write | current |
| mgnt2UploadDownloadReceivedFiles OBJECT-TYPE Number of files received during upload/download (significant when status is 'automatic') | 1.3.6.1.4.1.20044.1000.1.5.10 | Integer32 | read-write | current |
| mgnt2UploadDownloadRemainingFiles OBJECT-TYPE Number of files remaining for upload/download (significant when status is 'automatic') | 1.3.6.1.4.1.20044.1000.1.5.11 | Integer32 | read-write | current |
| mgnt2UploadDownloadFileType OBJECT-TYPE File type to download/upload : - 0 : pmPackage - 1 : mgntPackage - 2 : configurationFile - 3 : logFile - 4 : perfFile | 1.3.6.1.4.1.20044.1000.1.5.12 | Mgnt2DownloadFileType | read-write | current |
| mgnt2UploadDownloadFileCompression OBJECT-TYPE See Textual convention | 1.3.6.1.4.1.20044.1000.1.5.13 | Mgnt2UploadDownloadFileCompression | read-write | current |
| mgnt2UploadDownloadDeleteLastFile OBJECT-TYPE | 1.3.6.1.4.1.20044.1000.1.5.14 | EkiOnOff | read-write | current |
| mgnt2Configuration OBJECT-IDENTITY | 1.3.6.1.4.1.20044.1000.1.6 | |||
| mgnt2ConfigurationChecksum OBJECT-TYPE Entry used to identify uniquely configuration file content. (Used to check alignement between NE configuration and configuration known by NM) | 1.3.6.1.4.1.20044.1000.1.6.1 | DisplayString | not-accessible | deprecated |
| mgnt2ConfigurationActionStatus OBJECT-TYPE 0 : activate 1 : activated 2 : failed | 1.3.6.1.4.1.20044.1000.1.6.2 | Integer32 | read-write | current |
| mgnt2ConfigurationActivationErrorCode OBJECT-TYPE 0 : noError 1 : badValue 2 : missingFile 3 : emptyFile 4 : wrong file | 1.3.6.1.4.1.20044.1000.1.6.3 | Integer32 | read-only | current |
| mgnt2ConfigurationActivationErrorString OBJECT-TYPE String explaining Error code. For example, in case of bad value(s), faulty parameter(s) name(s) are given | 1.3.6.1.4.1.20044.1000.1.6.4 | DisplayString | read-only | current |
| mgnt2SoftwareDownload OBJECT-IDENTITY | 1.3.6.1.4.1.20044.1000.1.7 | |||
| mgnt2SoftwareDownloadActionStatus OBJECT-TYPE 0 : activate 1 : downgrade 2 : abort 3 : activated 4 : downgraded 5 : failed | 1.3.6.1.4.1.20044.1000.1.7.2 | Integer32 | read-write | current |
| mgnt2SoftwareDownloadActivationErrorCode OBJECT-TYPE 0 : noError 1 : badValue 2 : missingFile 3 : emptyFile 4 : wrong file | 1.3.6.1.4.1.20044.1000.1.7.3 | Integer32 | read-only | current |
| mgnt2SoftwareDownloadActivationErrorString OBJECT-TYPE String explaining Error code. For example, in case of bad value(s), faulty parameter(s) name(s) are given | 1.3.6.1.4.1.20044.1000.1.7.4 | DisplayString | read-only | current |
| mgnt2SoftwareDownloadActivationSlotNumber OBJECT-TYPE | 1.3.6.1.4.1.20044.1000.1.7.5 | Integer32 (1..32) | read-write | current |
| mgnt2SoftwareDownloadActivationClearFile OBJECT-TYPE 0 : keepfile 1 : clearfile | 1.3.6.1.4.1.20044.1000.1.7.6 | Integer32 | read-write | current |
| mgnt2SoftwareDownloadActivationFilename OBJECT-TYPE software file name including eventually file path | 1.3.6.1.4.1.20044.1000.1.7.7 | DisplayString | read-write | current |
| mgnt2SoftwareDownloadActivationAutoRestart OBJECT-TYPE 0 : norestart 1 : autorestart | 1.3.6.1.4.1.20044.1000.1.7.8 | Integer32 | read-write | current |
| mgnt2SoftwareDownloadActivationFileType OBJECT-TYPE File type to download/upload : - 0 : pmPackage - 1 : mgntPackage - 2 : configurationFile - 3 : logFile - 4 : perfFile | 1.3.6.1.4.1.20044.1000.1.7.9 | Mgnt2DownloadFileType | read-write | current |
| mgnt2LacTable OBJECT-TYPE The MGNT2 Local Access control table. This table is used to give access to the Craft Terminals or/and NMS. | 1.3.6.1.4.1.20044.1000.1.8 | not-accessible | current | |
| mgnt2LacEntry OBJECT-TYPE Entry is automatically created by Agent at start-up time. | 1.3.6.1.4.1.20044.1000.1.8.1 | not-accessible | current | |
| mgnt2LacIndex OBJECT-TYPE This is the index for the Local Access Control table. | 1.3.6.1.4.1.20044.1000.1.8.1.1 | Integer32 | read-only | current |
| mgnt2LacState OBJECT-TYPE See textual convention | 1.3.6.1.4.1.20044.1000.1.8.1.2 | Mgnt2LacState | read-write | current |
| mgnt2LacNoResponseTimeOutPeriod OBJECT-TYPE This is the No Response TimeOut Period attribute for the Local Access Control. | 1.3.6.1.4.1.20044.1000.1.8.1.3 | Integer32 (0..3600) | read-write | current |
| mgnt2PolledInfo OBJECT-IDENTITY | 1.3.6.1.4.1.20044.1000.1.10 | |||
| mgnt2PolledInfoLastAlarmNotificationId OBJECT-TYPE This object contains the notification identifier of the last alarm stored inside AlarmLog. | 1.3.6.1.4.1.20044.1000.1.10.1 | Counter32 | read-only | current |
| mgnt2PolledInfoLastEventNotificationId OBJECT-TYPE This object contains the notification identifier of the last Event stored inside EventLog. | 1.3.6.1.4.1.20044.1000.1.10.2 | Counter32 | read-only | current |
| mgnt2PolledInfoConfigurationChecksum OBJECT-TYPE Entry used to identify uniquely configuration file content. (Used to check alignement between NE configuration and configuration known by NM) | 1.3.6.1.4.1.20044.1000.1.10.3 | DisplayString | read-only | current |
| mgnt2SupportMCConf OBJECT-IDENTITY | 1.3.6.1.4.1.20044.1000.2 | |||
| mgnt2SupportMCCompl OBJECT-IDENTITY | 1.3.6.1.4.1.20044.1000.2.1 | |||
| mgnt2SupportMCGroup OBJECT-IDENTITY | 1.3.6.1.4.1.20044.1000.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| mgnt2TrapNMSAlarm NOTIFICATION-TYPE This notification reports Alarm event. | 1.3.6.1.4.1.20044.1000.1.11 | current |
| mgnt2TrapNMSEvent NOTIFICATION-TYPE This notification reports an Event. | 1.3.6.1.4.1.20044.1000.1.12 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| mgnt2SupportMc MODULE-COMPLIANCE This module compliance describes a set of objects required for MGNT2-NMS SNMP Agent implementation. | 1.3.6.1.4.1.20044.1000.2.1.1 | current |
| mgnt2ActiveAlmGroup OBJECT-GROUP This group describes the mandatory objects needed for the Active Alarm management configuration. | 1.3.6.1.4.1.20044.1000.2.1.2 | current |
| mgnt2AlmLogGroup OBJECT-GROUP This group describes the mandatory objects needed for the Alarm log management configuration. | 1.3.6.1.4.1.20044.1000.2.1.3 | current |
| mgnt2EventLogGroup OBJECT-GROUP This group describes the mandatory objects needed for the Event log management configuration. | 1.3.6.1.4.1.20044.1000.2.1.4 | current |