MIBs Depot

EKINOPS-MGNT2-MIB

Registered at
1.3.6.1.4.1.20044.7
Last updated
2017-01-10 00:00
Organization
Ekinops
Revisions
2005-11-24 00:00, 2006-01-24 00:00, 2006-03-10 00:00, 2006-05-10 00:00, 2006-05-23 00:00, 2006-09-28 00:00, 2006-12-13 00:00, 2007-02-09 00:00, 2007-04-24 00:00, 2007-06-19 00:00, 2007-08-27 00:00, 2007-11-27 00:00, 2008-05-20 00:00, 2008-06-18 00:00, 2008-08-18 00:00, 2008-10-07 00:00, 2008-11-19 00:00, 2009-01-05 00:00, 2009-12-15 00:00, 2010-01-04 00:00, 2010-02-16 00:00, 2010-07-16 00:00, 2010-10-27 00:00, 2011-03-17 00:00, 2011-04-07 00:00, 2011-04-13 00:00, 2011-05-27 00:00, 2011-06-08 00:00, 2011-06-30 00:00, 2011-09-12 00:00, 2012-02-08 00:00, 2012-03-19 00:00, 2012-07-16 00:00, 2013-05-28 00:00, 2013-05-30 00:00, 2013-08-29 00:00, 2013-09-04 00:00, 2013-09-11 00:00, 2013-11-06 00:00, 2014-07-30 00:00, 2014-09-01 00:00, 2015-02-11 00:00, 2015-04-01 00:00, 2015-04-14 00:00, 2015-04-14 00:00, 2015-10-09 00:00, 2015-11-05 00:00, 2016-05-27 00:00, 2016-06-15 00:00, 2016-10-12 00:00, 2017-01-10 00:00
Namespace
ekinops
Source file
EKINOPS-MGNT2-MIB
Digest
sha256:646f33c67dd3d448eba456fc5321dc6e01341df0094ec4e2593f555bd552d1b3

Description

MIB for Ekinops 360 management.

Contact

Ekinops 3, rue Blaise Pascal F-22300 Lannion / FRANCE Tel : +33 (0)2 96 05 00 30 Fax : +33 (0)2 96 48 62 39 E-mail: support@ekinops.net

Imports

FromSymbols
EKINOPS-MIBEkiApiState, EkiLoadGWSW, EkiLoadPermutMethod, EkiLoadPermutMode, EkiLoadState, EkiOnOff, EkiProtocol, EkiState, EkiSynchroMode, ekinops
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

EKINOPS-MGNT2-MIB
EKINOPS-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
EkiPlugInState
TEXTUAL-CONVENTION
Plug-in state
current
Mgnt2AckMode
TEXTUAL-CONVENTION
different modes to acknowledge alarms
current
Mgnt2AuthTypeValues
TEXTUAL-CONVENTION
Various types of authentication processes
current
Mgnt2CliAccessValues
TEXTUAL-CONVENTION
different type of access by ethernet for the CLI
current
Mgnt2CraftAccessValues
TEXTUAL-CONVENTION
enables access to the CRAFT
current
Mgnt2DccAccessValues
TEXTUAL-CONVENTION
different modes for the Dcc access
current
Mgnt2LogFileMode
TEXTUAL-CONVENTION
different modes for the log files
current
Mgnt2MasterEthMode
TEXTUAL-CONVENTION
different modes for the Master
current
Mgnt2NetMode
TEXTUAL-CONVENTION
different modes for the network management
current
Mgnt2PerfResyncValues
TEXTUAL-CONVENTION
different modes for the trap generation
current
Mgnt2SlotStatus
TEXTUAL-CONVENTION
Status of the slot
current
Mgnt2SubnetEthMode
TEXTUAL-CONVENTION
different modes for the Subnet
current
Mgnt2TrapModeValues
TEXTUAL-CONVENTION
different modes for the trap generation
current

Objects

NameOIDSyntaxAccessStatus
mgnt2SNMPAgentData
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.1
mgnt2IPmanagment
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.1.1
mgnt2GigmManagerIpAddressTable
OBJECT-TYPE
Manager IP address Table.
1.3.6.1.4.1.20044.7.1.1.1not-accessiblecurrent
mgnt2GigmManagerIpAddressEntry
OBJECT-TYPE
1.3.6.1.4.1.20044.7.1.1.1.1not-accessiblecurrent
mgnt2GigmManagerIpIndex
OBJECT-TYPE
Index of the IP address of the manager
1.3.6.1.4.1.20044.7.1.1.1.1.1Integer32 (1..32)read-createcurrent
mgnt2GigmManagerIpAddress
OBJECT-TYPE
IP address of the manager:This OID defines the IP address of the SNMP Manager attached to the Mgnt2
1.3.6.1.4.1.20044.7.1.1.1.1.2IpAddressread-createcurrent
mgnt2GigmManagerIpAddressTableRowStatus
OBJECT-TYPE
The status of this row.
1.3.6.1.4.1.20044.7.1.1.1.1.3RowStatusread-createcurrent
mgnt2GigmManagerTrapPort
OBJECT-TYPE
Manager UDP port.
1.3.6.1.4.1.20044.7.1.1.1.1.4Integer32read-createcurrent
mgnt2GigmManagerEnableCtrl
OBJECT-TYPE
Enabling trap of Ctrl.
1.3.6.1.4.1.20044.7.1.1.1.1.5EkiOnOffread-createcurrent
mgnt2GigmManagerEnableConfig
OBJECT-TYPE
Enabling trap of config.
1.3.6.1.4.1.20044.7.1.1.1.1.6EkiOnOffread-createcurrent
mgnt2GigmManagerEnableEvent
OBJECT-TYPE
Enabling trap of event.
1.3.6.1.4.1.20044.7.1.1.1.1.7EkiOnOffread-createcurrent
mgnt2GigmManagerEnableAlarmCrit
OBJECT-TYPE
Enabling trap of crit alarm.
1.3.6.1.4.1.20044.7.1.1.1.1.8EkiOnOffread-createcurrent
mgnt2GigmManagerEnableAlarmMajor
OBJECT-TYPE
Enabling trap of major alarm.
1.3.6.1.4.1.20044.7.1.1.1.1.9EkiOnOffread-createcurrent
mgnt2GigmManagerEnableAlarmMinor
OBJECT-TYPE
Enabling trap of minor alarm.
1.3.6.1.4.1.20044.7.1.1.1.1.10EkiOnOffread-createcurrent
mgnt2GigmManagerRegistrationTimeout
OBJECT-TYPE
Time-out for manager activities.
1.3.6.1.4.1.20044.7.1.1.1.1.11Integer32read-createcurrent
mgnt2GigmManagerEnableAlarmWarning
OBJECT-TYPE
Enabling trap of warning alarm.
1.3.6.1.4.1.20044.7.1.1.1.1.12EkiOnOffread-createcurrent
mgnt2GigmManagerEnableAlarmIndeterminate
OBJECT-TYPE
Enabling trap of indeterminate alarm.
1.3.6.1.4.1.20044.7.1.1.1.1.13EkiOnOffread-createcurrent
mgnt2GigmBoardIpAddress
OBJECT-TYPE
IP address of the Chassis:This OID defines the IP address of the Mgnt2
1.3.6.1.4.1.20044.7.1.1.2IpAddressread-writecurrent
mgnt2GigmIPAddresByDHCP
OBJECT-TYPE
IP address retrieved by DHCP:If enabled, the IP address is retrieved by DHCP, in which case changes take effect after a board reset. If disabled the object, mgnt2GigmBoardIpAddress defines the address
1.3.6.1.4.1.20044.7.1.1.3EkiStateread-writecurrent
mgnt2GigmNetmask
OBJECT-TYPE
Netmask for the board IP address:This OID defined the IP Subnet mask of the Mgnt2
1.3.6.1.4.1.20044.7.1.1.4IpAddressread-writecurrent
mgnt2GigmGatewayAddressTable
OBJECT-TYPE
Gateway IP address Table: This table contains all the gateway IP addresses.
1.3.6.1.4.1.20044.7.1.1.5not-accessiblecurrent
mgnt2GigmGatewayAddressEntry
OBJECT-TYPE
1.3.6.1.4.1.20044.7.1.1.5.1not-accessiblecurrent
mgnt2GigmGatewayIndex
OBJECT-TYPE
Index of the IP address of the gateway
1.3.6.1.4.1.20044.7.1.1.5.1.1Integer32 (0..1)read-createcurrent
mgnt2GigmGatewayAddress
OBJECT-TYPE
IP address of the gateway :This OID defines the IP address of the gateway attached to the Chassis
1.3.6.1.4.1.20044.7.1.1.5.1.2IpAddressread-createcurrent
mgnt2GigmGatewayOrder
OBJECT-TYPE
Gateway priority: This OID defines the priority of the gateway (lower number for higher priority)
1.3.6.1.4.1.20044.7.1.1.5.1.3Integer32read-createcurrent
mgnt2GigmSyslog
OBJECT-TYPE
IP address of the syslog server:This OID defines the IP address of the syslog of the Mgnt2
1.3.6.1.4.1.20044.7.1.1.6IpAddressread-writecurrent
mgnt2GigmNtpServer
OBJECT-TYPE
IP address of the ntp server:This OID defines the IP address of the ntp server for the Mgnt2
1.3.6.1.4.1.20044.7.1.1.7IpAddressread-writecurrent
mgnt2GigmNodeIpAddress
OBJECT-TYPE
Node IP address :This OID defines the Node IP address in node controller mode for the Mgnt2
1.3.6.1.4.1.20044.7.1.1.8IpAddressread-writecurrent
mgnt2ModulesManagement
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.1.2
mgnt2GigmBoardTable
OBJECT-TYPE
List of PMs plugged in the Chassis
1.3.6.1.4.1.20044.7.1.2.1not-accessiblecurrent
mgnt2GigmBoardEntry
OBJECT-TYPE
Row Definition for the PMs table
1.3.6.1.4.1.20044.7.1.2.1.1not-accessiblecurrent
mgnt2IndexBoards
OBJECT-TYPE
Index for PMs table
1.3.6.1.4.1.20044.7.1.2.1.1.1Integer32 (1..32)read-onlycurrent
mgnt2Position
OBJECT-TYPE
PM Slot number:This OID gives the slot number in which the PM is plugged
1.3.6.1.4.1.20044.7.1.2.1.1.2Integer32 (1..32)read-onlycurrent
mgnt2Name
OBJECT-TYPE
PM name:This OID gives the name of the PM plugged in the Mgnt2
1.3.6.1.4.1.20044.7.1.2.1.1.3DisplayStringread-onlycurrent
mgnt2PortNumber
OBJECT-TYPE
Number of Client Ports:This OID gives the number of client ports on the PM plugged in the Mgnt2
1.3.6.1.4.1.20044.7.1.2.1.1.4Integer32 (1..32)read-onlycurrent
mgnt2LineNumber
OBJECT-TYPE
Number of Line Ports:This OID gives the number of line ports on the PM plugged in the Mgnt2
1.3.6.1.4.1.20044.7.1.2.1.1.5Integer32 (1..32)read-onlycurrent
mgnt2GroupNumber
OBJECT-TYPE
Number of Groups:This OID gives the number of group of clients on the PM plugged in the Mgnt2
1.3.6.1.4.1.20044.7.1.2.1.1.6Integer32 (1..32)read-onlycurrent
mgnt2RootOIDInventory
OBJECT-TYPE
root oid of the inventory leaf of the corresponding PM
1.3.6.1.4.1.20044.7.1.2.1.1.7OBJECT IDENTIFIERread-onlycurrent
mgnt2SlotOcc
OBJECT-TYPE
PM Slot occupied:This OID gives the slots taken by this PM
1.3.6.1.4.1.20044.7.1.2.1.1.8DisplayStringread-onlycurrent
mgnt2SubFunctionLabel
OBJECT-TYPE
Sub Function Label: This OID gives the name of the sub function embedded on the Chassis. (applied only on the 100G Chassis)
1.3.6.1.4.1.20044.7.1.2.1.1.9DisplayStringread-onlycurrent
mgnt2SlotStatus
OBJECT-TYPE
Slot Status: This OID gives the status of the slot in the Chassis: See Textual COnvention
1.3.6.1.4.1.20044.7.1.2.1.1.10Mgnt2SlotStatusread-onlycurrent
mgnt2GigmSelectedBoard
OBJECT-TYPE
PM Slot number selected:PM selected for further operations in the Ekinops module board tree. This number is the slot number.
1.3.6.1.4.1.20044.7.1.2.7INTEGER (1..256)read-writecurrent
mgnt2GigmMibsTable
OBJECT-TYPE
List of MIBs supported by the Chassis SNMPAgent
1.3.6.1.4.1.20044.7.1.4not-accessibleobsolete
mgnt2GigmMibsEntry
OBJECT-TYPE
Row definition for MIBs table
1.3.6.1.4.1.20044.7.1.4.1not-accessibleobsolete
mgnt2IndexMibs
OBJECT-TYPE
Index for MIBs table
1.3.6.1.4.1.20044.7.1.4.1.1Integer32 (1..100)read-onlyobsolete
mgnt2MibName
OBJECT-TYPE
MIB name:This OID gives the name of the MIBs supported by the SNMP Agent
1.3.6.1.4.1.20044.7.1.4.1.2DisplayStringread-onlyobsolete
mgnt2MibPartNumber
OBJECT-TYPE
MIB Part Number:This OID gives the part number of the MIBs supported by the SNMP Agent
1.3.6.1.4.1.20044.7.1.4.1.3DisplayStringread-onlyobsolete
mgnt2GigmLogicalName
OBJECT-TYPE
Mgnt2 name:This OID defines the name of the Mgnt2
1.3.6.1.4.1.20044.7.1.5DisplayStringread-writecurrent
mgnt2GigmEqptType
OBJECT-TYPE
Equipment type:This OID defines the type of the Equipment
1.3.6.1.4.1.20044.7.1.6Integer32 (1..128)read-onlycurrent
mgnt2GigmTrapCount
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.1.7
mgnt2GigmTrapCounter
OBJECT-TYPE
Trap counter:This OID counts the number of trap sent
1.3.6.1.4.1.20044.7.1.7.1Integer32 (1..65535)read-onlycurrent
mgnt2GigmResetTrapCounter
OBJECT-TYPE
Reset trap counter:This OID reset the trap counter to 0
1.3.6.1.4.1.20044.7.1.7.2EkiOnOffread-writecurrent
mgnt2GigmSecurity
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.1.8
mgnt2GigmRoCommunity
OBJECT-TYPE
SNMP Get community:This OID defines the community for the SNMP Get function
1.3.6.1.4.1.20044.7.1.8.1DisplayStringread-writecurrent
mgnt2GigmRwCommunity
OBJECT-TYPE
SNMP Set community:This OID defines the community for the SNMP Set function
1.3.6.1.4.1.20044.7.1.8.2DisplayStringread-writecurrent
mgnt2GigmTrapCommunity
OBJECT-TYPE
SNMP Trap community:This OID defines the community for the SNMP Trap function
1.3.6.1.4.1.20044.7.1.8.3DisplayStringread-writecurrent
mgnt2GigmTime
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.1.9
mgnt2GigmCurrentHour
OBJECT-TYPE
Chassis Hour time:This OID defines the hour of the chassis' time
1.3.6.1.4.1.20044.7.1.9.1INTEGER (0..23)read-writecurrent
mgnt2GigmCurrentMinute
OBJECT-TYPE
Chassis Minute time:This OID defines the minute of the chassis' time
1.3.6.1.4.1.20044.7.1.9.2INTEGER (0..59)read-writecurrent
mgnt2GigmCurrentYear
OBJECT-TYPE
Chassis year date:This OID defines the year of the chassis' date
1.3.6.1.4.1.20044.7.1.9.3INTEGER (1970..3000)read-writecurrent
mgnt2GigmCurrentMonth
OBJECT-TYPE
Chassis month date:This OID defines the month of the chassis' date
1.3.6.1.4.1.20044.7.1.9.4INTEGER (1..12)read-writecurrent
mgnt2GigmCurrentDay
OBJECT-TYPE
Chassis day date:This OID defines the day of the chassis' date
1.3.6.1.4.1.20044.7.1.9.5INTEGER (1..31)read-writecurrent
mgnt2Authentication
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.1.10
mgnt2GigmRadiusServer
OBJECT-TYPE
IP address of the RADIUS server:This OID defines the IP address of the external RADIUS server for authentication
1.3.6.1.4.1.20044.7.1.10.1IpAddressread-writecurrent
mgnt2GigmRadiusPort
OBJECT-TYPE
TCP port number of the RADIUS server:This OID defines the TCP port number of the external RADIUS server for authentication
1.3.6.1.4.1.20044.7.1.10.2Integer32read-writecurrent
mgnt2GigmRadiusSecret
OBJECT-TYPE
Shared secret of the RADIUS server:This OID defines the shared secret password of the RADIUS server for authentication
1.3.6.1.4.1.20044.7.1.10.3DisplayStringread-writecurrent
mgnt2GigmLdapHost
OBJECT-TYPE
IP address of the LDAP host:This OID defines the IP address of the external LDAP server for authentication
1.3.6.1.4.1.20044.7.1.10.4IpAddressread-writedeprecated
mgnt2GigmLdapPort
OBJECT-TYPE
TCP port number of the LDAP server:This OID defines the TCP port number of the external LDAP server for authentication
1.3.6.1.4.1.20044.7.1.10.5Integer32read-writedeprecated
mgnt2GigmLdapBase
OBJECT-TYPE
LDAP base:This OID defines the name of the search base of the LDAP server for authentication<Help>LDAP base name spelled as follows: 'ou=users,ou=network,dc=yourcompany,dc=net'
1.3.6.1.4.1.20044.7.1.10.6DisplayStringread-writedeprecated
mgnt2GigmLdapVersion
OBJECT-TYPE
Protocol number in use by the LDAP server:This OID defines the protocol version used by the external LDAP server for authentication<Help>Protocol version used by the external LDAP server for authentication
1.3.6.1.4.1.20044.7.1.10.7Integer32read-writedeprecated
mgnt2GigmLdapBindDn
OBJECT-TYPE
LDAP Bind DN:This OID defines the login name used to connect into the LDAP server base for authentication<Help>LDAP binddn spelled as follows: 'cn=ldap_admin,dc=yourcompany,dc=net'
1.3.6.1.4.1.20044.7.1.10.8DisplayStringread-writedeprecated
mgnt2GigmLdapBindPw
OBJECT-TYPE
Credentials to bind the LDAP server with:This OID defines the credentials to bind the LDAP server with for authentication<Help>Credentials for LDAP access (bindpw)
1.3.6.1.4.1.20044.7.1.10.9DisplayStringread-writedeprecated
mgnt2GigmLdapScope
OBJECT-TYPE
Scope for LDAP base search:This OID defines the search scope for an LDAP base search <Help>LDAP search scope
1.3.6.1.4.1.20044.7.1.10.10DisplayStringread-writedeprecated
mgnt2GigmLdapPamPasswd
OBJECT-TYPE
PAM password handling:This OID defines the way the PAM password is handled for LDAP authentication <Help>The 'pam_password' option sould be one of the following: 'clear', 'crypt', 'md5', 'racf', 'exop'
1.3.6.1.4.1.20044.7.1.10.11DisplayStringread-writedeprecated
mgnt2GigmAuthenticationType
OBJECT-TYPE
Authentication type in use
1.3.6.1.4.1.20044.7.1.10.12Mgnt2AuthTypeValuesread-writecurrent
mgnt2Hardware
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2
mgnt2alarms
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.1
mgnt2AlmsynthAlm0
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.1.0
mgnt2AlmAbsFailure
OBJECT-TYPE
Chassis Management Module Failure :This OID indicates that the Chassis Management module is in fail condition <Condtype> ABS_FAILURE <Probcause> other(1) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.0.9EkiOnOffread-onlycurrent
mgnt2AlmFansFailure
OBJECT-TYPE
Chassis Fan Module Failure :This OID indicates that at least one of the three FAN unit of the FAN module is in fail condition <Condtype> FANS_FAILURE <Probcause> other(1) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.0.10EkiOnOffread-onlycurrent
mgnt2AlmDef48a
OBJECT-TYPE
Power Input A Present :This OID indicates that there is not input power on the right power connector (A) <Help> This alarm indicates if the power input B is present (left power connector) <Condtype> DEF_48A <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.0.11EkiOnOffread-onlycurrent
mgnt2AlmDef48b
OBJECT-TYPE
Power Input B Present :This OID indicates that there is not input power on the right power connector (B) <Help> This alarm indicates if the power input B is present (right power connector) <Condtype> DEF_48B <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.0.12EkiOnOffread-onlycurrent
mgnt2AlmMgntDefFuseA
OBJECT-TYPE
Mgnt Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition on the Management board <Help> Status of the MGNT Fuse A <Condtype> MGNT_DEF_FUSE_A <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.0.15EkiOnOffread-onlycurrent
mgnt2AlmMgntDefFuseB
OBJECT-TYPE
Mgnt Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition on the Management board <Help> Status of the MGNT Fuse B <Condtype> MGNT_DEF_FUSE_B <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.0.16EkiOnOffread-onlycurrent
mgnt2AlmsynthAlm1
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.1.1
mgnt2AlmNurgVisual
OBJECT-TYPE
Minor Chassis Alarm :This OID indicates at least one Minor alarm is active on the complete chassis (including TR-FAN, MGNT and PM) <Help> This alarm indicates at least one Minor alarm is active on the complete chassis (including TR-FAN, MGNT and PM) <Condtype> NURG_VISUAL <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.1.1EkiOnOffread-onlycurrent
mgnt2AlmUrgVisual
OBJECT-TYPE
Major Chassis Alarm :This OID indicates at least one Major alarm is active on the complete chassis (including TR-FAN, MGNT and PM) <Help> This alarm indicates at least one Major alarm is active on the complete chassis (including TR-FAN, MGNT and PM) <Condtype> URG_VISUAL <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.1.2EkiOnOffread-onlycurrent
mgnt2AlmCritVisual
OBJECT-TYPE
Critical Chassis Alarm :This OID indicates at least one Critical alarm is active on the complete chassis (including TR-FAN, MGNT and PM) <Help> This alarm indicates at least one Critical alarm is active on the complete chassis (including TR-FAN, MGNT and PM) <Condtype> CRIT_VISUAL <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.1.3EkiOnOffread-onlycurrent
mgnt2AlmAcknowledge
OBJECT-TYPE
Alarm Ack. :This OID indicates the alarms have been acknowledged by the user (locally or remotely) <Help> This status indicates the alarms have been acknowledged by the user (locally or remotely) <Condtype> ACKNOWLEDGE <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.1.16EkiOnOffread-onlycurrent
mgnt2AlmboardMgmntSet1
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.1.16
mgnt2AlmPmSlot1Absent
OBJECT-TYPE
PM present in Chassis slot 1 :This OID indicates the presence of a PM in Slot 1 of the Chassis . <Help> This status indicates if a PM is detected in slot 1 <Condtype> PM_SLOT1_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.16.2EkiOnOffread-onlycurrent
mgnt2AlmPmSlot2Absent
OBJECT-TYPE
PM present in Chassis slot 2 :This OID indicates the presence of a PM in Slot 2 of the Chassis . <Help> This status indicates if a PM is detected in slot 2 <Condtype> PM_SLOT2_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.16.3EkiOnOffread-onlycurrent
mgnt2AlmPmSlot3Absent
OBJECT-TYPE
PM present in Chassis slot 3 :This OID indicates the presence of a PM in Slot 3 of the Chassis . <Help> This status indicates if a PM is detected in slot 3 <Condtype> PM_SLOT3_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.16.4EkiOnOffread-onlycurrent
mgnt2AlmPmSlot4Absent
OBJECT-TYPE
PM present in Chassis slot 4 :This OID indicates the presence of a PM in Slot 4 of the Chassis . <Help> This status indicates if a PM is detected in slot 4 <Condtype> PM_SLOT4_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.16.5EkiOnOffread-onlycurrent
mgnt2AlmPmSlot5Absent
OBJECT-TYPE
PM present in Chassis slot 5 :This OID indicates the presence of a PM in Slot 5 of the Chassis . <Help> This status indicates if a PM is detected in slot 5 <Condtype> PM_SLOT5_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.16.6EkiOnOffread-onlycurrent
mgnt2AlmPmSlot6Absent
OBJECT-TYPE
PM present in Chassis slot 6 :This OID indicates the presence of a PM in Slot 6 of the Chassis . <Help> This status indicates if a PM is detected in slot 6 <Condtype> PM_SLOT6_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.16.7EkiOnOffread-onlycurrent
mgnt2AlmPmSlot7Absent
OBJECT-TYPE
PM present in Chassis slot 7 :This OID indicates the presence of a PM in Slot 7 of the Chassis . <Help> This status indicates if a PM is detected in slot 7 <Condtype> PM_SLOT7_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.16.8EkiOnOffread-onlycurrent
mgnt2AlmPmSlot8Absent
OBJECT-TYPE
PM present in Chassis slot 8 :This OID indicates the presence of a PM in Slot 8 of the Chassis . <Help> This status indicates if a PM is detected in slot 8 <Condtype> PM_SLOT8_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.16.9EkiOnOffread-onlycurrent
mgnt2AlmPmSlot9Absent
OBJECT-TYPE
PM present in Chassis slot 9 :This OID indicates the presence of a PM in Slot 9 of the Chassis . <Help> This status indicates if a PM is detected in slot 9 <Condtype> PM_SLOT9_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.16.10EkiOnOffread-onlycurrent
mgnt2AlmPmSlot10Absent
OBJECT-TYPE
PM present in Chassis slot 10 :This OID indicates the presence of a PM in Slot 10 of the Chassis . <Help> This status indicates if a PM is detected in slot 10 <Condtype> PM_SLOT10_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.16.11EkiOnOffread-onlycurrent
mgnt2AlmPmSlot11Absent
OBJECT-TYPE
PM present in Chassis slot 11 :This OID indicates the presence of a PM in Slot 11 of the Chassis . <Help> This status indicates if a PM is detected in slot 11 <Condtype> PM_SLOT11_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.16.12EkiOnOffread-onlycurrent
mgnt2AlmPmFanAbsent
OBJECT-TYPE
FAN module present in Chassis :This OID indicates the presence of the FAN module in the Chassis. <Help> This alarm indicates if the FAN module is detected in the chassis. <Condtype> PM_FAN_ABSENT <Probcause> other(1) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.16.14EkiOnOffread-onlycurrent
mgnt2AlmboardMgmntSet2
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.1.17
mgnt2AlmPmSlot12Absent
OBJECT-TYPE
PM present in Chassis slot 12 :This OID indicates the presence of a PM in Slot 12 of the Chassis . <Help> This status indicates if a PM is detected in slot 12 <Condtype> PM_SLOT12_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.17.1EkiOnOffread-onlycurrent
mgnt2AlmPmSlot13Absent
OBJECT-TYPE
PM present in Chassis slot 13 :This OID indicates the presence of a PM in Slot 13 of the Chassis . <Help> This status indicates if a PM is detected in slot 13 <Condtype> PM_SLOT13_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.17.2EkiOnOffread-onlycurrent
mgnt2AlmPmSlot14Absent
OBJECT-TYPE
PM present in Chassis slot 14 :This OID indicates the presence of a PM in Slot 14 of the Chassis . <Help> This status indicates if a PM is detected in slot 14 <Condtype> PM_SLOT14_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.17.3EkiOnOffread-onlycurrent
mgnt2AlmPmSlot15Absent
OBJECT-TYPE
PM present in Chassis slot 15 :This OID indicates the presence of a PM in Slot 15 of the Chassis . <Help> This status indicates if a PM is detected in slot 15 <Condtype> PM_SLOT15_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.17.4EkiOnOffread-onlycurrent
mgnt2AlmPmSlot16Absent
OBJECT-TYPE
PM present in Chassis slot 16 :This OID indicates the presence of a PM in Slot 16 of the Chassis . <Help> This status indicates if a PM is detected in slot 16 <Condtype> PM_SLOT16_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.17.5EkiOnOffread-onlycurrent
mgnt2AlmPmSlot17Absent
OBJECT-TYPE
PM present in Chassis slot 17 :This OID indicates the presence of a PM in Slot 17 of the Chassis . <Help> This status indicates if a PM is detected in slot 17 <Condtype> PM_SLOT17_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.17.6EkiOnOffread-onlycurrent
mgnt2AlmPmSlot18Absent
OBJECT-TYPE
PM present in Chassis slot 18 :This OID indicates the presence of a PM in Slot 18 of the Chassis . <Help> This status indicates if a PM is detected in slot 18 <Condtype> PM_SLOT18_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.17.7EkiOnOffread-onlycurrent
mgnt2AlmPmSlot19Absent
OBJECT-TYPE
PM present in Chassis slot 19 :This OID indicates the presence of a PM in Slot 19 of the Chassis . <Help> This status indicates if a PM is detected in slot 19 <Condtype> PM_SLOT19_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.17.8EkiOnOffread-onlycurrent
mgnt2AlmPmSlot20Absent
OBJECT-TYPE
PM present in Chassis slot 20 :This OID indicates the presence of a PM in Slot 20 of the Chassis . <Help> This status indicates if a PM is detected in slot 20 <Condtype> PM_SLOT20_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.17.9EkiOnOffread-onlycurrent
mgnt2AlmfanMgmnt
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.1.20
mgnt2AlmPbFan1Fail
OBJECT-TYPE
Fan Unit #1 Failed On Fan Module :This OID indicates a failure on fan 1. Removal of the fan unit or no rotation sets the OID. <Help> This alarm indicates if the FAN #1 is in fail condition <Condtype> PB_FAN1_FAIL <Probcause> heatingVentCoolingSystemProblem (22) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.20.2EkiOnOffread-onlycurrent
mgnt2AlmPbFan2Fail
OBJECT-TYPE
Fan Unit #2 Failed On Fan Module :This OID indicates a failure on fan 2. Removal of the fan unit or no rotation sets the OID. <Help> This alarm indicates if the FAN #2 is in fail condition <Condtype> PB_FAN2_FAIL <Probcause> heatingVentCoolingSystemProblem (22) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.20.3EkiOnOffread-onlycurrent
mgnt2AlmPbFan3Fail
OBJECT-TYPE
Fan Unit #3 Failed On Fan Module :This OID indicates a failure on fan 3. Removal of the fan unit or no rotation sets the OID. <Help> This alarm indicates if the FAN #3 is in fail condition <Condtype> PB_FAN3_FAIL <Probcause> heatingVentCoolingSystemProblem (22) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.20.4EkiOnOffread-onlycurrent
mgnt2AlmPbFan4Fail
OBJECT-TYPE
Fan Unit #4 Failed On Fan Module :This OID indicates a failure on fan 4. Removal of the fan unit or no rotation sets the OID. <Help> This alarm indicates if the FAN #4 is in fail condition <Condtype> PB_FAN4_FAIL <Probcause> heatingVentCoolingSystemProblem (22) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.20.5EkiOnOffread-onlycurrent
mgnt2AlmPbFan5Fail
OBJECT-TYPE
Fan Unit #5 Failed On Fan Module :This OID indicates a failure on fan 5. Removal of the fan unit or no rotation sets the OID. <Help> This alarm indicates if the FAN #5 is in fail condition <Condtype> PB_FAN5_FAIL <Probcause> heatingVentCoolingSystemProblem (22) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.20.6EkiOnOffread-onlycurrent
mgnt2AlmPbFan6Fail
OBJECT-TYPE
Fan Unit #6 Failed On Fan Module :This OID indicates a failure on fan 6. Removal of the fan unit or no rotation sets the OID. <Help> This alarm indicates if the FAN #6 is in fail condition <Condtype> PB_FAN6_FAIL <Probcause> heatingVentCoolingSystemProblem (22) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.20.7EkiOnOffread-onlycurrent
mgnt2AlmFanFilterAbsent
OBJECT-TYPE
Dust Filter Presence :This OID indicates that the dust filter is not present<Help> This alarm indicates if the Dust Filter is detected in the chassis. <Condtype> FAN_FILTER_ABSENT <Probcause> other(1) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.20.16EkiOnOffread-onlycurrent
mgnt2AlmfanPwrMgmnt
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.1.24
mgnt2AlmFanPwrProtOn
OBJECT-TYPE
Fan Backup Power :This OID indicates the backup power on the FAN module is switched on <Condtype> FAN_PWR_PROT_ON <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.24.12EkiOnOffread-onlycurrent
mgnt2AlmFanPwrFail1
OBJECT-TYPE
Fan Main Power :This OID indicates a failure on the main power of the FAN module <Help> This alarm indicates if one of the tow main power convert of the FAN module is in fail condition <Condtype> FAN_PWR_FAIL_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.24.13EkiOnOffread-onlycurrent
mgnt2AlmFanDefFuseA
OBJECT-TYPE
Fan Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition on the Fan board <Help> Status of the FAN Fuse A <Condtype> FAN_DEF_FUSE_A <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.24.15EkiOnOffread-onlycurrent
mgnt2AlmFanDefFuseB
OBJECT-TYPE
Fan Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition on the Fan board <Help> Status of the FAN Fuse B <Condtype> FAN_DEF_FUSE_B <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.24.16EkiOnOffread-onlycurrent
mgnt2AlmremoveablefanModuleFail
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.1.25
mgnt2AlmFan1ModuleAbsent
OBJECT-TYPE
FAN Module #1 Present In Chassis :This OID indicates the presence of the FAN module #1 in the Chassis.<Help> This alarm indicates if the FAN module #1 is detected in the chassis. <Condtype> FAN1_MODULE_ABSENT <Probcause> other(1) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.25.1EkiOnOffread-onlycurrent
mgnt2AlmFan2ModuleAbsent
OBJECT-TYPE
FAN Module #2 Present In Chassis :This OID indicates the presence of the FAN module #2 in the Chassis.<Help> This alarm indicates if the FAN module #2 is detected in the chassis. <Condtype> FAN2_MODULE_ABSENT <Probcause> other(1) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.25.2EkiOnOffread-onlycurrent
mgnt2AlmFan3ModuleAbsent
OBJECT-TYPE
FAN Module #3 Present In Chassis :This OID indicates the presence of the FAN module #3 in the Chassis.<Help> This alarm indicates if the FAN module #3 is detected in the chassis. <Condtype> FAN3_MODULE_ABSENT <Probcause> other(1) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.25.3EkiOnOffread-onlycurrent
mgnt2AlmFan4ModuleAbsent
OBJECT-TYPE
FAN Module #4 Present In Chassis :This OID indicates the presence of the FAN module #4 in the Chassis.<Help> This alarm indicates if the FAN module #4 is detected in the chassis. <Condtype> FAN4_MODULE_ABSENT <Probcause> other(1) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.25.4EkiOnOffread-onlycurrent
mgnt2AlmremoveableFanModuleMgmnt
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.1.26
mgnt2AlmFan1ModuleFail
OBJECT-TYPE
FAN Module #1 Failure :This OID indicates a failure on FAN module #1 <Help> This alarm indicates if the FAN module #1 is in fail condition <Condtype> FAN1_MODULE_FAIL <Probcause> heatingVentCoolingSystemProblem (22) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.26.1EkiOnOffread-onlycurrent
mgnt2AlmFan2ModuleFail
OBJECT-TYPE
FAN Module #2 Failure :This OID indicates a failure on FAN module #2 <Help> This alarm indicates if the FAN module #2 is in fail condition <Condtype> FAN2_MODULE_FAIL <Probcause> heatingVentCoolingSystemProblem (22) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.26.2EkiOnOffread-onlycurrent
mgnt2AlmFan3ModuleFail
OBJECT-TYPE
FAN Module #3 Failure :This OID indicates a failure on FAN module #3 <Help> This alarm indicates if the FAN module #3 is in fail condition <Condtype> FAN3_MODULE_FAIL <Probcause> heatingVentCoolingSystemProblem (22) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.26.3EkiOnOffread-onlycurrent
mgnt2AlmFan4ModuleFail
OBJECT-TYPE
FAN Module #4 Failure :This OID indicates a failure on FAN module #4 <Help> This alarm indicates if the FAN module #4 is in fail condition <Condtype> FAN4_MODULE_FAIL <Probcause> heatingVentCoolingSystemProblem (22) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.26.4EkiOnOffread-onlycurrent
mgnt2AlmswAlarm1
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.1.32
mgnt2AlmApiError
OBJECT-TYPE
Comm fail between Agent and Transport :This OID indicates a failure detected on the Agent.The failure is located on a communication process with the modules. <Help> This alarm indicates if there is a communication mismatch between the MGNT board and a single PM <Condtype> API_ERROR <Probcause> adapterError (2) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.32.1EkiOnOffread-onlycurrent
mgnt2AlmFifoCmdError
OBJECT-TYPE
SNMP Agent to Transport comm FIFO fail :This OID indicates a failure inside the FIFO stack. The FIFO containing the messages from the agent (write) to the PMs is full <Help> This alarm indicates if there is a communication mismatch between the MGNT board and all PM <Condtype> FIFO_CMD_ERROR <Probcause> adapterError (2) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.32.2EkiOnOffread-onlycurrent
mgnt2AlmPollingManagerError
OBJECT-TYPE
Polling Manager fail :This OID indicates a failure on the Manager polling the PM's <Help> <Help> This alarm indicates if there is a polling manager failure between the MGNT and the Pm's <Condtype> POLLING_MANAGER_ERROR <Probcause> adapterError (2) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.32.3EkiOnOffread-onlycurrent
mgnt2AlmapiErrorCode
OBJECT-TYPE
API Error Identification :Error number and description of the abs1AlmApiError object <Condtype> API_ERROR_CODE_1 <Probcause> <Alarmtype>
1.3.6.1.4.1.20044.7.2.1.33INTEGER (0..255)read-onlycurrent
mgnt2AlmlogMgmnt
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.1.34
mgnt2AlmLogFileFull
OBJECT-TYPE
Log File Full Alarm :This OID indicates that a log file is full. This file must be cleared to insure correct log function <Help> This alarm indicates that one of the log file is Full <Condtype> LOG_FILE_FULL <Probcause> fileError (18) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.34.1EkiOnOffread-onlycurrent
mgnt2AlmLog80Full
OBJECT-TYPE
Log File Full Warning :This OID indicates that a log file is 80% full. <Help> This alarm indicates that one of the log file is 80% Full <Condtype> LOG_80_FULL <Probcause> fileError (18) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.34.2EkiOnOffread-onlycurrent
mgnt2AlmntpSyncLoss
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.1.35
mgnt2AlmNtpSyncLoss
OBJECT-TYPE
NTP Sync Loss :This OID indicates a loss of synchronisation with the NTP Server. <Help> This alarm indicates a loss of synchronisation with the NTP Server. <Condtype> NTP_SYNC_LOSS <Probcause> timingProblem (53) <Alarmtype> timeDomainViolation (11) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.35.1EkiOnOffread-onlycurrent
mgnt2AlmCpuTempOverRange
OBJECT-TYPE
CPU HighTemperature Warning :This OID indicates a temperature over the expected range on the CPU<Help> This warning indicates that the temperature of the CPU is reaching its internal limit <Condtype> CPU_TEMP_OVER_RANGE <Probcause> other(1) <Alarmtype> equipmentAlarm (5) <Polarity> (2)
1.3.6.1.4.1.20044.7.2.1.35.2EkiOnOffread-onlycurrent
mgnt2controls
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.2
mgnt2Ctrlsynth5
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.2.5
mgnt2CtrlChassisShutdown
OBJECT-TYPE
Shut Down of the Management Module :This OID shall be set before shutting down the Chassis power. A delay of 5 sec is necessary between this OID is set and power is shut down. <Help> This control initiates a shutdown of the MGNT board,
1.3.6.1.4.1.20044.7.2.2.5.2EkiOnOffread-writecurrent
mgnt2CtrlChassisWarmReset
OBJECT-TYPE
Reset of the Management Module :This oid triggers a 'warm' reset of the Chassis . This type of reset is not traffic affecting and the modules configuration remains unchanged. <Help> This control initiates a warm reset of the MGNT board,
1.3.6.1.4.1.20044.7.2.2.5.3EkiOnOffread-writecurrent
mgnt2CtrlChassisColdReset
OBJECT-TYPE
Cold Reset of the Management Module :This oid triggers a 'cold' reset of the Chassis . This type of reset is not traffic affecting and the modules configuration remains unchanged. <Help> This control initiates a cold reset of the MGNT board,
1.3.6.1.4.1.20044.7.2.2.5.4EkiOnOffread-writecurrent
mgnt2CtrltestLed
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.2.18
mgnt2CtrlGreenLed
OBJECT-TYPE
Green Leds Test :This OID switches on all the green Leds as a test feature <Help> This control initiates a test leds turning all the LEDs of the chassis to green
1.3.6.1.4.1.20044.7.2.2.18.1EkiOnOffread-writecurrent
mgnt2CtrlRedLed
OBJECT-TYPE
Red Leds Test :This OID switches on all the red Leds as a test feature <Help> This control initiates a test leds turning all the LEDs of the chassis to red
1.3.6.1.4.1.20044.7.2.2.18.2EkiOnOffread-writecurrent
mgnt2CtrlLedOff
OBJECT-TYPE
Switch off Leds Test :This OID switches off all the Leds as a test feature <Help> This control initiates a test leds turning all the LEDs of the complete chassis to OFF
1.3.6.1.4.1.20044.7.2.2.18.3EkiOnOffread-writecurrent
mgnt2CtrllogFile
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.2.19
mgnt2CtrlLogFileReset
OBJECT-TYPE
Log File Reset :This OID clears all the log files
1.3.6.1.4.1.20044.7.2.2.19.1EkiOnOffread-writecurrent
mgnt2CtrlmgntSaveConfig
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.2.23
mgnt2CtrlSaveConfig
OBJECT-TYPE
Save Configuration :This OID is used save the configuration related to the enable and mode traps objects <Help> This control saves the customer configuration on the MGNT board
1.3.6.1.4.1.20044.7.2.2.23.1EkiOnOffread-writecurrent
mgnt2CtrlmgntGetGlobalConfig
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.2.24
mgnt2CtrlGetGlobalConfig
OBJECT-TYPE
Get Global Chassis Config :This OID is used to create a global configuration file of the chassis <Help> This control creates a single configuration file from PM's and MGNT configuration file into the RAM
1.3.6.1.4.1.20044.7.2.2.24.1EkiOnOffread-writecurrent
mgnt2CtrlmgntPutGlobalConfig
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.2.25
mgnt2CtrlPutGlobalConfig
OBJECT-TYPE
Put Global Chassis Config :This OID is used to extract a global configuration file of the chassis <Help> This control creates configuration files to PM's and MGNT from a single configuration file in the RAM
1.3.6.1.4.1.20044.7.2.2.25.1EkiOnOffread-writecurrent
mgnt2CtrlmgntAcknowledge
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.2.26
mgnt2CtrlAcknowledge
OBJECT-TYPE
Alarm Ack. :This OID is used to acknowledge the current active alarms of the chassis <Help> This control is used to acknowledge the current active alarms of the chassis
1.3.6.1.4.1.20044.7.2.2.26.1EkiOnOffread-writecurrent
mgnt2config
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.3
mgnt2CfgethPort2
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.3.17
mgnt2CfgEthPort2Disable
OBJECT-TYPE
2nd Ethernet Port Disable :This OID disables 'Ethernet Port 2' .When not required, this port must be disabled in order to prevent unwanted access. <Help> Disable the second Ethernet port
1.3.6.1.4.1.20044.7.2.3.17.1EkiOnOffread-writecurrent
mgnt2CfgChassisEthernetSplit
OBJECT-TYPE
Chassis Ethernet Split :This OID enables the split between the two kendings. <Help> Enable/Disable the switch between the two kendings
1.3.6.1.4.1.20044.7.2.3.17.2EkiOnOffread-writecurrent
mgnt2CfgmgntDccEnable
OBJECT-TYPE
DCC Access :This OID selects the mode to enable the DCC on the slots. This Mode enables the Slots 2-4-6-8-10 , or the Slots 2-6-10-14-18. <Help> Defines the DCC access on the backplane of the chassis (Slots 2-4-6-8-10 or Slots 2-6-10-14-18)
1.3.6.1.4.1.20044.7.2.3.18Mgnt2DccAccessValuesread-writecurrent
mgnt2CfgpmTrapEnable
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.3.20
mgnt2CfgPmCriticalTrapEn
OBJECT-TYPE
Critical Alarm Traps Enable :This OID, when set, enables the generation of the critical alarm trap for all the PM plugged in the chassis <Help> In detailed traps mechanism, enable the trap emission on critical alarm detected on PM
1.3.6.1.4.1.20044.7.2.3.20.1EkiOnOffread-writecurrent
mgnt2CfgPmMajorTrapEn
OBJECT-TYPE
Major Alarm Traps Enable :This OID, when set, enables the generation of the major alarm trap for all the PM plugged in the chassis <Help> In detailed traps mechanism, enable the trap emission on major alarm detected on PM
1.3.6.1.4.1.20044.7.2.3.20.2EkiOnOffread-writecurrent
mgnt2CfgPmMinorTrapEn
OBJECT-TYPE
Minor Alarm Traps Enable :This OID, when set, enables the generation of the minor alarm trap for all the PM plugged in the chassis <Help> In detailed traps mechanism, enable the trap emission on minor alarm detected on PM
1.3.6.1.4.1.20044.7.2.3.20.3EkiOnOffread-writecurrent
mgnt2CfgPmControlTrapEn
OBJECT-TYPE
Control Traps Enable :This OID, when set, enables the generation of a trap when a control is sent to a PM plugged in the chassis <Help> In detailed traps mechanism, enable the trap emission on control sent to PM
1.3.6.1.4.1.20044.7.2.3.20.5EkiOnOffread-writecurrent
mgnt2CfgPmConfigTrapEn
OBJECT-TYPE
Config Traps Enable :This OID, when set, enables the generation of a trap when the configuration of a PM plugged in the chassis is modified <Help> In detailed traps mechanism, enable the trap emission on PM configuration modificatio
1.3.6.1.4.1.20044.7.2.3.20.6EkiOnOffread-writecurrent
mgnt2CfgmgntTrapEnable
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.3.21
mgnt2CfgMgntCriticalTrapEn
OBJECT-TYPE
MGNT Critical Alarm Traps Enable :This OID, when set, enables the generation of the critical alarm trap for the MGNT and FAN board <Help> In detailed traps mechanism, enable the trap emission on critical alarm detected on MGNT and FAN
1.3.6.1.4.1.20044.7.2.3.21.1EkiOnOffread-writecurrent
mgnt2CfgMgntMajorTrapEn
OBJECT-TYPE
MGNT Major Traps Enable :This OID, when set, enables the generation of the major alarm trap for the MGNT and FAN board <Help> In detailed traps mechanism, enable the trap emission on major alarm detected on MGNT and FAN
1.3.6.1.4.1.20044.7.2.3.21.2EkiOnOffread-writecurrent
mgnt2CfgMgntMinorTrapEn
OBJECT-TYPE
MGNT Minor Alarm Traps Enable :This OID, when set, enables the generation of the minor alarm trap for the MGNT and FAN board <Help> In detailed traps mechanism, enable the trap emission on minor alarm detected on MGNT and FAN
1.3.6.1.4.1.20044.7.2.3.21.3EkiOnOffread-writecurrent
mgnt2CfgMgntControlTrapEn
OBJECT-TYPE
MGNT Control Traps Enable :This OID, when set, enables the generation of a trap when a control is sent to a MGNT plugged in the chassis <Help> In detailed traps mechanism, enable the trap emission on control sent to MGNT
1.3.6.1.4.1.20044.7.2.3.21.5EkiOnOffread-writecurrent
mgnt2CfgMgntConfigTrapEn
OBJECT-TYPE
MGNT Config Traps Enable :This OID, when set, enables the generation of a trap when the configuration of a MGNT plugged in the chassis is modified <Help> In detailed traps mechanism, enable the trap emission on MGNT configuration modification
1.3.6.1.4.1.20044.7.2.3.21.6EkiOnOffread-writecurrent
mgnt2CfgMgntEventTrapEn
OBJECT-TYPE
MGNT Event Traps Enable :This OID, when set, enables the generation of a trap when an event occurs on the chassis <Help> In detailed traps mechanism, enable the trap emission on event detected in the chassis
1.3.6.1.4.1.20044.7.2.3.21.7EkiOnOffread-writecurrent
mgnt2CfgmgntTrapMode
OBJECT-TYPE
Traps Mode :This OID is used to define the trap mode (synthetic or detailed mode) <Help> Selects the traps mechanism
1.3.6.1.4.1.20044.7.2.3.22Mgnt2TrapModeValuesread-writecurrent
mgnt2CfgsyslogEnable
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.3.23
mgnt2CfgSyslogEventEn
OBJECT-TYPE
Syslog Event Enable :This OID, when set, enables the generation of a syslog, when an event has been detected <Help> Enable a syslog emission on event detected on the chassis
1.3.6.1.4.1.20044.7.2.3.23.1EkiOnOffread-writecurrent
mgnt2CfgSyslogConfigEn
OBJECT-TYPE
Syslog Config Enable :This OID, when set, enables the generation of a syslog, when the configuration has been changed. <Help> Enable a syslog emission on a configuration change detected on the chassis
1.3.6.1.4.1.20044.7.2.3.23.2EkiOnOffread-writecurrent
mgnt2CfgSyslogCtrlEn
OBJECT-TYPE
Syslog Control Enable :This OID, when set, enables the generation of a syslog, when a control is set <Help> Enable a syslog emission on a control operated on the chassis
1.3.6.1.4.1.20044.7.2.3.23.3EkiOnOffread-writecurrent
mgnt2CfgSyslogAlarmEn
OBJECT-TYPE
Syslog Alarm Enable :This OID, when set, enables the generation of a syslog, when an alarm occurs <Help> Enable a syslog emission on an alarm detected on the chassi
1.3.6.1.4.1.20044.7.2.3.23.4EkiOnOffread-writecurrent
mgnt2CfgntpTimeZone
OBJECT-TYPE
NTP Time Zone :This OID defines the time zone of the MGNT board for the NTP server <Help> This object defines the time zone of the MGNT board (from -12 to +12 hours from the GMT).
1.3.6.1.4.1.20044.7.2.3.24INTEGER (-12..12)read-writecurrent
mgnt2CfgpmConfEnable
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.3.25
mgnt2CfgPmBackupEnable
OBJECT-TYPE
Automatic Config Backup :This OID enables the automatic PM configuration backup mechanism on PM insertion or PM configuration modification. <Help> This parameter enables the automatic PM configuration backup mechanism on PM insertion or PM configuration modificatio
1.3.6.1.4.1.20044.7.2.3.25.1EkiOnOffread-writecurrent
mgnt2CfgPmRestoreEnable
OBJECT-TYPE
Automatic Config Restore :This OID enables the automatic PM configuration restore mechanism on PM insertion <Help> This parameter enables the automatic PM configuration restore mechanism on PM insertio
1.3.6.1.4.1.20044.7.2.3.25.2EkiOnOffread-writecurrent
mgnt2CfginactivityTimeout
OBJECT-TYPE
Idle Timeout :This OID defines the idle timeout (in minutes) to automatically logout from the craft and from the CLI. <Help> This object defines the idle timeout (in minutes) to automatically logout from the craft and from the CLI
1.3.6.1.4.1.20044.7.2.3.26INTEGER (-1..255)read-writecurrent
mgnt2CfgcliAccess
OBJECT-TYPE
CLI access :This OID selects the protocol for the remote access to a CLI user. <Help> This object defines the protocol used for a remote CLI.
1.3.6.1.4.1.20044.7.2.3.27Mgnt2CliAccessValuesread-writecurrent
mgnt2CfgcraftAccess
OBJECT-TYPE
CRAFT access :This OID selects the remote access to a CRAFT user. <Help> This object defines the access for a remote CRAFT.
1.3.6.1.4.1.20044.7.2.3.28Mgnt2CraftAccessValuesread-writecurrent
mgnt2CfgperfModes1
OBJECT-TYPE
PERF Synchro Source :This OID selects the source of the synchronisation (Internal/External). <Help> This object defines the source of the synchronization to operate performance monitoring.
1.3.6.1.4.1.20044.7.2.3.29EkiSynchroModeread-writecurrent
mgnt2CfgalarmModelActiv
OBJECT-TYPE
Acknowledge mode :This OID defines the alarms akcnowledge mode <Help> This configuration defines the alarms akcnowledge mode
1.3.6.1.4.1.20044.7.2.3.30Mgnt2AckModeread-writecurrent
mgnt2CfgnetworkInput
OBJECT-TYPE
Network input :This OID selects the connection of the Ethernet Network input to either the switches (2) or the daughter board (1) , in this case the MGNT can act as a router <Help> This configuration defines the use of the Network input of the front panel
1.3.6.1.4.1.20044.7.2.3.31Mgnt2NetModeread-writecurrent
mgnt2CfgmasterEthMode
OBJECT-TYPE
DHCP Master Ethernet Mode :This OID selects the mode of the Master Ethernet in DHCP mode (2) or in Static Mode(1) <Help> This configuration defines the use of the Master Ethernet Mode
1.3.6.1.4.1.20044.7.2.3.32Mgnt2MasterEthModeread-writecurrent
mgnt2CfgsubnetMode
OBJECT-TYPE
DHCP Subnet Mode :This OID selects the mode of the Subnet in DHCP mode (2) or in Static Mode(1) <Help> This configuration defines the use of the Subnet Mode
1.3.6.1.4.1.20044.7.2.3.33Mgnt2SubnetEthModeread-writecurrent
mgnt2CfgrstpMode
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.3.34
mgnt2CfgRstpEnable
OBJECT-TYPE
RSTP Enable :This OID enables the RSTP algorythm <Help> This configuration defines the use of RSTP
1.3.6.1.4.1.20044.7.2.3.34.1EkiOnOffread-writecurrent
mgnt2CfglldpMode
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.3.35
mgnt2CfgLldpEnable
OBJECT-TYPE
LLDP Enable :This OID enables the LLDP algorythm <Help> This configuration defines the use of LLDP
1.3.6.1.4.1.20044.7.2.3.35.1EkiOnOffread-writecurrent
mgnt2CfglogMode
OBJECT-TYPE
Log Mode :This OID enables the log file mode<Help> This configuration defines the use of the log mod
1.3.6.1.4.1.20044.7.2.3.36Mgnt2LogFileModeread-writecurrent
mgnt2CfgnodeMode
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.3.37
mgnt2CfgNodeControllerEnable
OBJECT-TYPE
Node Controller Mode :This OID enables the node controller mode<Help> This configuration defines the use of the node controller mod
1.3.6.1.4.1.20044.7.2.3.37.1EkiOnOffread-writecurrent
mgnt2CfgunprivilegedUsersMode
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.3.38
mgnt2CfgRestrictUnprivilegeUsers
OBJECT-TYPE
Restrict Unprivileged Users Rights :This OID enables the restriction of unprivileged user rights to modify their own password <Help> This parameter enables the restriction of unprivileged user rights to modify their own password
1.3.6.1.4.1.20044.7.2.3.38.1EkiOnOffread-writecurrent
mgnt2CfgoscDccLinkUpThreshold
OBJECT-TYPE
OSC/DCC Link Up Thresh. [10-30]s :This OID defines the confirmation threshold to consider an OSC/DCC link as up <Help> This parameter defines the confirmation threshold to consider an OSC/DCC link as up
1.3.6.1.4.1.20044.7.2.3.39INTEGER (0..255)read-writecurrent
mgnt2CfgoscDccLinkDownThreshold
OBJECT-TYPE
OSC/DCC Link Down Thresh. [2-3]s :This OID defines the confirmation threshold to consider an OSC/DCC link as down <Help> This parameter defines the confirmation threshold to consider an OSC/DCC link as down.
1.3.6.1.4.1.20044.7.2.3.40INTEGER (0..255)read-writecurrent
mgnt2CfgaccountAutoLock
OBJECT-TYPE
Account Auto-Lock [-1 / 1-10] err :This OID defines the number of error password to lock an account. This counter is reset on successful login or after an administrator defined period (see Fail count reset) Set to -1 to disables the feature.<Help> This parameter defines the number of error password to lock an account. This counter is reset on successful login or after an administrator defined period (see Fail count reset) Set to -1 to disables the feature.
1.3.6.1.4.1.20044.7.2.3.41INTEGER (-1..255)read-writecurrent
mgnt2CfgfailCountReset
OBJECT-TYPE
Fail Count Reset [-1 / 1-10] hrs :This OID defines the minimum time (in hours) to reset the failed login counter. This counter is also reset on successful login. Set to -1 to disable the feature.<Help> This parameter defines the minimum time (in hours) to reset the failed login counter. This counter is also reset on successful login. Set to -1 to disable the feature
1.3.6.1.4.1.20044.7.2.3.42INTEGER (-1..255)read-writecurrent
mgnt2CfgftpMode
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.3.44
mgnt2CfgFtpEnable
OBJECT-TYPE
FTP Enable :This OID enables the FTP protocol <Help> This configuration enables the FTP protocol
1.3.6.1.4.1.20044.7.2.3.44.1EkiOnOffread-writecurrent
mgnt2CfgtftpMode
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.2.3.45
mgnt2CfgTftpEnable
OBJECT-TYPE
TFTP Enable :This OID enables the TFTP protocol <Help> This configuration enables the TFTP protocol
1.3.6.1.4.1.20044.7.2.3.45.1EkiOnOffread-writecurrent
mgnt2Traps
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.3
mgnt2TrapBoardNumber
OBJECT-TYPE
This OID gives the slot number of the PM that sent the last trap
1.3.6.1.4.1.20044.7.3.50INTEGER (1..16)read-onlycurrent
mgnt2TrapSeverity
OBJECT-TYPE
This OID gives the trap severity
1.3.6.1.4.1.20044.7.3.51DisplayStringread-onlycurrent
mgnt2TrapSourcePm
OBJECT-TYPE
This OID gives the mnemonic of the pm who sent a trap
1.3.6.1.4.1.20044.7.3.52DisplayStringread-onlycurrent
mgnt2TrapSourcePortType
OBJECT-TYPE
This OID gives the type of the port who sent a trap
1.3.6.1.4.1.20044.7.3.53DisplayStringread-onlycurrent
mgnt2TrapSourcePortNumber
OBJECT-TYPE
This OID gives the port number of the PM that sent the last trap
1.3.6.1.4.1.20044.7.3.54INTEGER (1..16)read-onlycurrent
mgnt2TrapSourceLabel
OBJECT-TYPE
This OID gives the label of the alarm who sent a trap
1.3.6.1.4.1.20044.7.3.55DisplayStringread-onlycurrent
mgnt2TrapSourceValue
OBJECT-TYPE
This OID gives the value of the alarm who sent a trap
1.3.6.1.4.1.20044.7.3.56EkiOnOffread-onlycurrent
mgnt2TrapEventLabel
OBJECT-TYPE
This OID gives the label of the event
1.3.6.1.4.1.20044.7.3.57DisplayStringread-onlycurrent
mgnt2TrapNodeControllerIpAddress
OBJECT-TYPE
This OID gives the IP address of the Node Controller
1.3.6.1.4.1.20044.7.3.58IpAddressread-onlycurrent
mgnt2TrapChassisId
OBJECT-TYPE
This OID gives the chassis ID
1.3.6.1.4.1.20044.7.3.59DisplayStringread-onlycurrent
mgnt2SoftwareManagement
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.4
mgnt2DwlUploadingTable
OBJECT-TYPE
SNMP Agent SW packages in ram: List of the SNMP agent software packages available in /ram for download on the Chassis managment module flash
1.3.6.1.4.1.20044.7.4.1not-accessibledeprecated
mgnt2DwlUploadingEntry
OBJECT-TYPE
Row definition for the package uploading table
1.3.6.1.4.1.20044.7.4.1.1not-accessibledeprecated
mgnt2IndexUpload
OBJECT-TYPE
Index for uploading table
1.3.6.1.4.1.20044.7.4.1.1.1Integer32 (0..4)read-onlydeprecated
mgnt2DwlUploadFileName
OBJECT-TYPE
Package filename in RAM:This OID gives the name of the SNMP agent software packages in RAM
1.3.6.1.4.1.20044.7.4.1.1.2DisplayStringread-onlydeprecated
mgnt2ImmediateReplacement
OBJECT-TYPE
Immediat Agent Replacement:This OID indicates to switch to selected SNMP agent immediately or after reset of the MGNT2
1.3.6.1.4.1.20044.7.4.1.1.3EkiStateread-writedeprecated
mgnt2FileUpload
OBJECT-TYPE
Agent File Upload:This OID validates the upload of the SNMP agent from RAM to FLASH
1.3.6.1.4.1.20044.7.4.1.1.4EkiOnOffread-writedeprecated
mgnt2DeletePackageFromRam
OBJECT-TYPE
Delete Package from RAM:This OID requests to delete the SNMP Agent SW package from RAM
1.3.6.1.4.1.20044.7.4.1.1.5EkiOnOffread-writedeprecated
mgnt2FlashingInProgress
OBJECT-TYPE
Flashing in Progress:This OID indicates whether there is a file upload to FLASH in progress
1.3.6.1.4.1.20044.7.4.1.1.6EkiOnOffread-onlydeprecated
mgnt2DwlPackageTable
OBJECT-TYPE
List of SNMP agent software packages present in flash memory
1.3.6.1.4.1.20044.7.4.2not-accessibledeprecated
mgnt2DwlPackageEntry
OBJECT-TYPE
Row definition for the package management table
1.3.6.1.4.1.20044.7.4.2.1not-accessibledeprecated
mgnt2IndexPackage
OBJECT-TYPE
Index for package management table
1.3.6.1.4.1.20044.7.4.2.1.1Integer32 (0..4)read-onlydeprecated
mgnt2DwlPackageFileName
OBJECT-TYPE
Package File name in FLASH:This OID gives the name of the SNMP agent software package in FLASH
1.3.6.1.4.1.20044.7.4.2.1.2DisplayStringread-onlydeprecated
mgnt2ExtractedPack
OBJECT-TYPE
Extracted SNMP agent software pack.: Indicates whether the package is currently extracted in the FLASH. If it is, it must not be deleted
1.3.6.1.4.1.20044.7.4.2.1.3EkiOnOffread-onlydeprecated
mgnt2SwitchTo
OBJECT-TYPE
Switch to package:This OID activates the SNMP Agent Software package
1.3.6.1.4.1.20044.7.4.2.1.4EkiOnOffread-writedeprecated
mgnt2Immediate
OBJECT-TYPE
Immediate SNMP agent activation: This OID indicates whether the package is scheduled for immediate activation or activation will take place following the next reset
1.3.6.1.4.1.20044.7.4.2.1.5EkiOnOffread-writedeprecated
mgnt2DeletePackageFromFlash
OBJECT-TYPE
Delete package from FLASH:This OID deletes the SNMP agent software package from the FLASH
1.3.6.1.4.1.20044.7.4.2.1.6EkiOnOffread-writedeprecated
mgnt2PackageExtractionInProgress
OBJECT-TYPE
Package extraction in progress:This OID indicates that a SNMP agent software activation is in progress
1.3.6.1.4.1.20044.7.4.2.1.7EkiOnOffread-onlydeprecated
mgnt2DwlUploadingTableUpdate
OBJECT-TYPE
Uploading Table update:This OID updates the contents of the uploading table
1.3.6.1.4.1.20044.7.4.3EkiOnOffread-writedeprecated
mgnt2LoadPMTable
OBJECT-TYPE
List of the PM module software files (GW/SW) present on the repository
1.3.6.1.4.1.20044.7.4.4not-accessibledeprecated
mgnt2LoadPMEntry
OBJECT-TYPE
Row definition for the LOAD article table
1.3.6.1.4.1.20044.7.4.4.1not-accessibledeprecated
mgnt2LoadPMIndex
OBJECT-TYPE
Index for Load article table
1.3.6.1.4.1.20044.7.4.4.1.1Integer32 (0..32)read-onlydeprecated
mgnt2LoadFileName
OBJECT-TYPE
PM Upgrade filename:This OID gives the name of the file
1.3.6.1.4.1.20044.7.4.4.1.2DisplayStringread-onlydeprecated
mgnt2LoadFileType
OBJECT-TYPE
PM upgrade file type:This OID gives the type of file (gateware or software)
1.3.6.1.4.1.20044.7.4.4.1.3EkiLoadGWSWread-onlydeprecated
mgnt2LoadState
OBJECT-TYPE
PM upgrade status:This OID gives the status of the selected Load file
1.3.6.1.4.1.20044.7.4.4.1.4EkiLoadStateread-onlydeprecated
mgnt2LoadModuleNumber
OBJECT-TYPE
PM ugprade target:This OID defines the slot number of the PM to upgrade
1.3.6.1.4.1.20044.7.4.4.1.5Integer32 (1..8)read-writedeprecated
mgnt2LoadResetMethod
OBJECT-TYPE
PM upgrade reset method:This OID defines the reset method (manual, immediate or scheduled)
1.3.6.1.4.1.20044.7.4.4.1.6EkiLoadPermutMethodread-writedeprecated
mgnt2LoadResetMode
OBJECT-TYPE
PM upgrade reset mode:This OID defines the type of reset (cold or warm)
1.3.6.1.4.1.20044.7.4.4.1.7EkiLoadPermutModeread-writedeprecated
mgnt2LoadBankNumber
OBJECT-TYPE
PM upgrade bank number:This OID defines the target bank number in the PM's flash
1.3.6.1.4.1.20044.7.4.4.1.8Integer32 (0..4)read-writedeprecated
mgnt2LoadDownloadProgress
OBJECT-TYPE
PM upgrade progress:This OID gives the upgrade progress (percentage)
1.3.6.1.4.1.20044.7.4.4.1.9Integer32 (0..100)read-onlydeprecated
mgnt2LoadTransfer
OBJECT-TYPE
PM upgrade transfer:This OID launchs the transfer of the associated file to the selected PM's flash
1.3.6.1.4.1.20044.7.4.4.1.10EkiOnOffread-writedeprecated
mgnt2LoadDelete
OBJECT-TYPE
PM upgrade delete file:This OID deletes the associated file from the RAM of the management board
1.3.6.1.4.1.20044.7.4.4.1.11EkiOnOffread-writedeprecated
mgnt2LoadPMTableUpdate
OBJECT-TYPE
Load PM Table update:This OID updates the contents of the Load table
1.3.6.1.4.1.20044.7.4.5EkiOnOffread-writedeprecated
mgnt2DwlEkicraftPkgTable
OBJECT-TYPE
List of Ekicraft software packages present in flash memory
1.3.6.1.4.1.20044.7.4.6not-accessibledeprecated
mgnt2DwlEkicraftPkgEntry
OBJECT-TYPE
Row definition for the package management table
1.3.6.1.4.1.20044.7.4.6.1not-accessibledeprecated
mgnt2IndexEkicraftPkg
OBJECT-TYPE
Index for Ekicraft package management table
1.3.6.1.4.1.20044.7.4.6.1.1Integer32 (0..4)read-onlydeprecated
mgnt2DwlEkicraftPkgFileName
OBJECT-TYPE
Package File name in FLASH:This OID gives the name of the Ekicraft software package in FLASH
1.3.6.1.4.1.20044.7.4.6.1.2DisplayStringread-onlydeprecated
mgnt2DwlEkicraftExtractedPack
OBJECT-TYPE
Extracted Ekicraft software pack.: Indicates whether the package is currently extracted in the FLASH. If it is, it must not be deleted
1.3.6.1.4.1.20044.7.4.6.1.3EkiOnOffread-onlydeprecated
mgnt2DwlEkicraftSwitchTo
OBJECT-TYPE
Switch to package:This OID activates the Ekicraft Software package
1.3.6.1.4.1.20044.7.4.6.1.4EkiOnOffread-writedeprecated
mgnt2DwlEkicraftImmediate
OBJECT-TYPE
Immediate Ekicraft activation: This OID indicates whether the package is scheduled for immediate activation or activation will take place following the next reset
1.3.6.1.4.1.20044.7.4.6.1.5EkiOnOffread-writedeprecated
mgnt2DeleteEkicraftPkgFromFlash
OBJECT-TYPE
Delete package from FLASH:This OID deletes the Ekicraft software package from the FLASH
1.3.6.1.4.1.20044.7.4.6.1.6EkiOnOffread-writedeprecated
mgnt2EkicraftPkgExtractionInProgress
OBJECT-TYPE
Package extraction in progress:This OID indicates that an Ekicraft activation is in progress
1.3.6.1.4.1.20044.7.4.6.1.7EkiOnOffread-onlydeprecated
mgnt2ConfigManagement
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.5
mgnt2CnfUploadConfigFilesTable
OBJECT-TYPE
List of configuration files uploaded to RAM
1.3.6.1.4.1.20044.7.5.1not-accessibledeprecated
mgnt2CnfUploadConfigFilesEntry
OBJECT-TYPE
Row definition for the package uploading table
1.3.6.1.4.1.20044.7.5.1.1not-accessibledeprecated
mgnt2CnfUploadConfigIndex
OBJECT-TYPE
Index of config files
1.3.6.1.4.1.20044.7.5.1.1.1Integer32 (0..16)read-onlydeprecated
mgnt2CnfConfigFileName
OBJECT-TYPE
Configuration filename in RAM:This OID gives the name of the configuration file in RAM
1.3.6.1.4.1.20044.7.5.1.1.2DisplayStringread-onlydeprecated
mgnt2CnfConfigSlot
OBJECT-TYPE
Configuration target:This OID defines the target slot number for the configuration file
1.3.6.1.4.1.20044.7.5.1.1.3Integer32 (0..3)read-writedeprecated
mgnt2CnfConfigUpload
OBJECT-TYPE
Configuration Upload:This OID uploads the configuration file to the specified slot number in the PM FLASH
1.3.6.1.4.1.20044.7.5.1.1.4EkiOnOffread-writedeprecated
mgnt2CnfDeleteConfigFile
OBJECT-TYPE
Configuration delete from RAM:This OID deletes the configuration file from RAM
1.3.6.1.4.1.20044.7.5.1.1.5EkiOnOffread-writedeprecated
mgnt2CnfManageConfigFilesTable
OBJECT-TYPE
List of configuration files uploaded to RAM
1.3.6.1.4.1.20044.7.5.2not-accessibledeprecated
mgnt2CnfManageConfigFilesEntry
OBJECT-TYPE
Row definition for the package uploading table
1.3.6.1.4.1.20044.7.5.2.1not-accessibledeprecated
mgnt2CnfManageConfigIndex
OBJECT-TYPE
Index of config file slots
1.3.6.1.4.1.20044.7.5.2.1.1Integer32 (0..16)read-onlydeprecated
mgnt2CnfManageConfigFileID
OBJECT-TYPE
Configuration file ID in FLASH:This OID gives the ID of the configuration file in MGNT2 FLASH
1.3.6.1.4.1.20044.7.5.2.1.2DisplayStringread-writedeprecated
mgnt2CnfManageConfigFileName
OBJECT-TYPE
Configuration file name in FLASH:This OID gives the name of the configuration file in MGNT2 FLASH
1.3.6.1.4.1.20044.7.5.2.1.3DisplayStringread-writedeprecated
mgnt2CnfModuleSlotNumber
OBJECT-TYPE
Configuration target:This OID defines the target module slot number for the configuration file
1.3.6.1.4.1.20044.7.5.2.1.4Integer32 (3..6)read-writedeprecated
mgnt2CnfBackupConfig
OBJECT-TYPE
Configuration backup:This OID backups the configuration of the specified module to the selected file in MGNT2 FLASH
1.3.6.1.4.1.20044.7.5.2.1.5EkiOnOffread-writedeprecated
mgnt2CnfRestoreConfig
OBJECT-TYPE
Configuration Restore:This OID restores the configuration of the specified module from the selected file in MGNT2 FLASH
1.3.6.1.4.1.20044.7.5.2.1.6EkiOnOffread-writedeprecated
mgnt2CnfExportConfig
OBJECT-TYPE
Configuration Export:This OID exports the selected file in MGNT2 FLASH to a file in RAM
1.3.6.1.4.1.20044.7.5.2.1.7EkiOnOffread-writedeprecated
mgnt2CnfDeleteConfig
OBJECT-TYPE
Configuration delete from FLASH:This OID deletes the configuration file from the MGNT2 FLASH
1.3.6.1.4.1.20044.7.5.2.1.8EkiOnOffread-writedeprecated
mgnt2RemoteInventory
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.6
mgnt2RinvHwPlatform
OBJECT-TYPE
Chassis Hardware inventory:This OID gives the Hardware inventory of the Mgnt2 management module
1.3.6.1.4.1.20044.7.6.1DisplayStringread-writecurrent
mgnt2RinvSoftwarePackage
OBJECT-TYPE
Chassis Software package inventory:this OID gives the Software package inventory of the Mgnt2 management module
1.3.6.1.4.1.20044.7.6.2DisplayStringread-writecurrent
mgnt2RinvGateware
OBJECT-TYPE
Chassis Gateware inventory:This OID gives the gateware inventory of the Mgnt2 management module
1.3.6.1.4.1.20044.7.6.3DisplayStringread-writecurrent
mgnt2RinvAgent
OBJECT-TYPE
Chassis Software inventory:This OID gives the software inventory of the Mgnt2 management module
1.3.6.1.4.1.20044.7.6.4DisplayStringread-writecurrent
mgnt2RinvCraft
OBJECT-TYPE
Chassis Craft inventory:This OID gives the craft inventory of the Mgnt2 management module
1.3.6.1.4.1.20044.7.6.5DisplayStringread-writecurrent
mgnt2RinvLinux
OBJECT-TYPE
Chassis Linux inventory:This OID gives the linux inventory of the Mgnt2 management module
1.3.6.1.4.1.20044.7.6.6DisplayStringread-writecurrent
mgnt2GigmPlugInTable
OBJECT-TYPE
List of Plug-ins present
1.3.6.1.4.1.20044.7.6.7not-accessiblecurrent
mgnt2GigmPlugInEntry
OBJECT-TYPE
Row Definition for the Plug-ins table
1.3.6.1.4.1.20044.7.6.7.1not-accessiblecurrent
mgnt2IndexPlugIns
OBJECT-TYPE
Index for PMs table
1.3.6.1.4.1.20044.7.6.7.1.1Integer32 (1..32)read-onlycurrent
mgnt2PlugInRinv
OBJECT-TYPE
Plug-in RI:This OID gives the remote inventory of the plug-in
1.3.6.1.4.1.20044.7.6.7.1.2DisplayStringread-onlycurrent
mgnt2PollingPresent
OBJECT-TYPE
Polling present:This OID gives the presence of the polling plug-in
1.3.6.1.4.1.20044.7.6.7.1.3EkiPlugInStateread-onlycurrent
mgnt2SnmpPresent
OBJECT-TYPE
Snmp present:This OID gives the presence of the snmp plug-in
1.3.6.1.4.1.20044.7.6.7.1.4EkiPlugInStateread-onlycurrent
mgnt2RinvBackpanel
OBJECT-TYPE
Backpanel inventory:This OID gives the Backpanel inventory of the chassis
1.3.6.1.4.1.20044.7.6.8DisplayStringread-writecurrent
mgnt2RinvFan
OBJECT-TYPE
Fan inventory:This OID gives the fan inventory of the chassis
1.3.6.1.4.1.20044.7.6.9DisplayStringread-writecurrent
mgnt2RinvUboot
OBJECT-TYPE
U-Boot inventory:This OID gives the U-Boot inventory
1.3.6.1.4.1.20044.7.6.10DisplayStringread-writecurrent
mgnt2ErrorCounters
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.7
mgnt2GigmErrorCounterTable
OBJECT-TYPE
List of error counters
1.3.6.1.4.1.20044.7.7.1not-accessiblecurrent
mgnt2GigmErrorCounterEntry
OBJECT-TYPE
Row Definition for the error counters table
1.3.6.1.4.1.20044.7.7.1.1not-accessiblecurrent
mgnt2IndexErrorCounter
OBJECT-TYPE
Index for error counters table
1.3.6.1.4.1.20044.7.7.1.1.1Integer32 (1..32)read-onlycurrent
mgnt2ErrorCounterSlotNumber
OBJECT-TYPE
Slot number:This OID gives the slot number for the corresponding counter
1.3.6.1.4.1.20044.7.7.1.1.2Integer32read-onlycurrent
mgnt2ErrorCounterValue
OBJECT-TYPE
Count value:This OID gives the value of the error counter
1.3.6.1.4.1.20044.7.7.1.1.3Integer32read-onlycurrent
mgnt2GigmResetErrorCounters
OBJECT-TYPE
Reset error counters:This OID reset the error counters to 0
1.3.6.1.4.1.20044.7.7.2EkiOnOffread-writecurrent
mgnt2Perf
OBJECT-IDENTITY
1.3.6.1.4.1.20044.7.8
mgnt2PerfCapabilityTable
OBJECT-TYPE
List of Perf capability of PMs plugged in the Chassis
1.3.6.1.4.1.20044.7.8.1not-accessiblecurrent
mgnt2PerfCapabilityEntry
OBJECT-TYPE
Row Definition for the Perf capability table
1.3.6.1.4.1.20044.7.8.1.1not-accessiblecurrent
mgnt2PerfCapIndexBoards
OBJECT-TYPE
Index for Perf cap table
1.3.6.1.4.1.20044.7.8.1.1.1Integer32 (1..32)read-onlycurrent
mgnt2PerfCapPosition
OBJECT-TYPE
PM Slot number:This OID gives the slot number in which the PM is plugged
1.3.6.1.4.1.20044.7.8.1.1.2Integer32 (1..32)read-onlycurrent
mgnt2PerfCapName
OBJECT-TYPE
PM name:This OID gives the name of the PM plugged in the Mgnt2
1.3.6.1.4.1.20044.7.8.1.1.3DisplayStringread-onlycurrent
mgnt2PerfCapStatus
OBJECT-TYPE
Status of the perf cap:This OID gives the capability of the pm to do performance
1.3.6.1.4.1.20044.7.8.1.1.4EkiOnOffread-onlycurrent
mgnt2PerfCapOidEnable
OBJECT-TYPE
OID of the object perf enable:This OID gives the OID of the perf enable object of the correspondind mib of the module
1.3.6.1.4.1.20044.7.8.1.1.5OBJECT IDENTIFIERread-onlycurrent
mgnt2GigmPerf15minSync
OBJECT-TYPE
15 min sync perf : this oid send a 15min sync to all modules
1.3.6.1.4.1.20044.7.8.2EkiOnOffread-writecurrent
mgnt2GigmPerf24hSync
OBJECT-TYPE
15 min sync perf : this oid send a 24h sync to all modules
1.3.6.1.4.1.20044.7.8.3EkiOnOffread-writecurrent
mgnt2PerfResyncNMS
OBJECT-TYPE
Resync Perf : this oid allows to create an historical perf file for all modules
1.3.6.1.4.1.20044.7.8.4Mgnt2PerfResyncValuesread-writecurrent

Notifications

NameOIDStatus
mgnt2TrapApi
NOTIFICATION-TYPE
Api error trap with its number
1.3.6.1.4.1.20044.7.3.1current
mgnt2TrapSwError
NOTIFICATION-TYPE
Chassis software error other API
1.3.6.1.4.1.20044.7.3.2current
mgnt2TrapBoardInserted
NOTIFICATION-TYPE
A board has been plugged in
1.3.6.1.4.1.20044.7.3.4current
mgnt2TrapBoardRemoved
NOTIFICATION-TYPE
A board has been plugged out
1.3.6.1.4.1.20044.7.3.5current
mgnt2TrapRestoreConfDone
NOTIFICATION-TYPE
The Configuration has been restored from the management board
1.3.6.1.4.1.20044.7.3.6current
mgnt2TrapGlobalPowerFail
NOTIFICATION-TYPE
A global power supply failure has been detected
1.3.6.1.4.1.20044.7.3.8current
mgnt2TrapFanPowerFail
NOTIFICATION-TYPE
A Fan power supply failure has been detected
1.3.6.1.4.1.20044.7.3.9current
mgnt2TrapGigmPowerFail
NOTIFICATION-TYPE
A power supply default has been detected in the management board
1.3.6.1.4.1.20044.7.3.10current
mgnt2TrapFanFail
NOTIFICATION-TYPE
A Fan failure has been detected
1.3.6.1.4.1.20044.7.3.11current
mgnt2TrapLogFileFull
NOTIFICATION-TYPE
Indicates that the corresponding log file is almost full
1.3.6.1.4.1.20044.7.3.20current
mgnt2TrapAlarm
NOTIFICATION-TYPE
Indicates that an alarm state has changed
1.3.6.1.4.1.20044.7.3.30current
mgnt2TrapEvent
NOTIFICATION-TYPE
Indicates that an event has occured
1.3.6.1.4.1.20044.7.3.31current
mgnt2TrapControl
NOTIFICATION-TYPE
Indicates that a control has been set to the module
1.3.6.1.4.1.20044.7.3.32current
mgnt2TrapConfig
NOTIFICATION-TYPE
Indicates that a config word has been changed
1.3.6.1.4.1.20044.7.3.33current