EATON-SENSOR-MIB
- Registered at
- 1.3.6.1.4.1.534.6.8.1
- Last updated
- 2018-12-17 12:00
- Organization
- Eaton Corporation
- Revisions
- 2018-12-17 12:00
- Namespace
- eaton
- Source file
EATON-SENSOR-MIB- Digest
sha256:e87a00846c3bf723a56604e5993f669604f6fcf7c38374e237c8120dbbd61e23
Description
The MIB module for Eaton Sensors.
Contact
http://powerquality.eaton.com
Imports
| From | Symbols |
|---|---|
| EATON-OIDS | sensorAgent |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
EATON-OIDS EATON-SENSOR-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| AlarmLevelType TEXTUAL-CONVENTION Describes the alarm level. | current | |||
| AlarmSeverityType TEXTUAL-CONVENTION Describes the alarm severity. | current | |||
| AlarmType TEXTUAL-CONVENTION Describes the alarm according to a measured value by reference to the triggers. | current | |||
| CommunicationStatus TEXTUAL-CONVENTION Describes the communication sensor status or probe status. | current | |||
| ElevationType TEXTUAL-CONVENTION Describes the elevation in the rack. | current | |||
| EnableType TEXTUAL-CONVENTION Describes enable/disable. | current | |||
| PolarityType TEXTUAL-CONVENTION Describes the polarity configuration. | current | |||
| PositionType TEXTUAL-CONVENTION Describes the position by reference to the data center aisle. | current | |||
| ProbeConnectionType TEXTUAL-CONVENTION Describes the probe connection to the sensor or probe. | current | |||
| ResetCommandType TEXTUAL-CONVENTION Commands a reset. | current | |||
| StateType TEXTUAL-CONVENTION Describes the state of a digital input that depends on its measure and the polrity configuration. | current | |||
| TemperatureUnitType TEXTUAL-CONVENTION Describes the temperature unit used to read/write the temperature data. | current | |||
| UnixTimeStamp TEXTUAL-CONVENTION Unix time stamp. Measured in seconds since January 1, 1970. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| sensor OBJECT-IDENTITY | 1.3.6.1.4.1.534.6.8.1.1 | |||
| sensorNotification OBJECT-IDENTITY | 1.3.6.1.4.1.534.6.8.1.1.0 | |||
| sensorCount OBJECT-TYPE Number of sensor managed on this device. | 1.3.6.1.4.1.534.6.8.1.1.1 | Integer32 | read-only | current |
| sensorIdentificationTable OBJECT-TYPE A list of sensor devices identification data. The number of entries is given by sensorCount. | 1.3.6.1.4.1.534.6.8.1.1.2 | not-accessible | current | |
| sensorIdentificationEntry OBJECT-TYPE An entry for a sensor device identification. | 1.3.6.1.4.1.534.6.8.1.1.2.1 | not-accessible | current | |
| sensorIndex OBJECT-TYPE A unique value for each sensor device. Its value ranges from 1 to sensorCount. | 1.3.6.1.4.1.534.6.8.1.1.2.1.1 | Integer32 (1..3) | accessible-for-notify | current |
| sensorUuid OBJECT-TYPE A unique uuid value for each sensor device. | 1.3.6.1.4.1.534.6.8.1.1.2.1.2 | OCTET STRING | read-only | current |
| sensorConnectionType OBJECT-TYPE Sensor connection type with the device that monitors it. | 1.3.6.1.4.1.534.6.8.1.1.2.1.3 | ProbeConnectionType | read-only | current |
| sensorAddress OBJECT-TYPE Depending of the connection implementation : Modbus Slave Id, BT Mac address, ... | 1.3.6.1.4.1.534.6.8.1.1.2.1.4 | OCTET STRING | read-only | current |
| sensorMonitoredBy OBJECT-TYPE Parent oid device where the sensor is connected to and monitored by. | 1.3.6.1.4.1.534.6.8.1.1.2.1.5 | OBJECT IDENTIFIER | read-only | current |
| sensorManufacturer OBJECT-TYPE The vendor name of the sensor device. | 1.3.6.1.4.1.534.6.8.1.1.2.1.6 | OCTET STRING (SIZE(1..31)) | read-only | current |
| sensorModel OBJECT-TYPE The model name of the sensor device. | 1.3.6.1.4.1.534.6.8.1.1.2.1.7 | OCTET STRING (SIZE(1..31)) | read-only | current |
| sensorPartNumber OBJECT-TYPE The catalog part number of the sensor device. | 1.3.6.1.4.1.534.6.8.1.1.2.1.8 | OCTET STRING (SIZE(1..31)) | read-only | current |
| sensorSerialNumber OBJECT-TYPE The serial number of the sensor device. | 1.3.6.1.4.1.534.6.8.1.1.2.1.9 | OCTET STRING (SIZE(1..31)) | read-only | current |
| sensorFirmwareVersion OBJECT-TYPE The firmware version of the sensor device. | 1.3.6.1.4.1.534.6.8.1.1.2.1.10 | OCTET STRING (SIZE(1..31)) | read-only | current |
| sensorConfigurationTable OBJECT-TYPE A list of sensor devices configuration data. The number of entries is given by sensorCount. | 1.3.6.1.4.1.534.6.8.1.1.3 | not-accessible | current | |
| sensorConfigurationEntry OBJECT-TYPE An entry for a sensor device configuration. | 1.3.6.1.4.1.534.6.8.1.1.3.1 | not-accessible | current | |
| sensorName OBJECT-TYPE The friendly name of the sensor device. | 1.3.6.1.4.1.534.6.8.1.1.3.1.1 | OCTET STRING (SIZE(1..31)) | read-write | current |
| sensorLocation OBJECT-TYPE The location of the sensor device. | 1.3.6.1.4.1.534.6.8.1.1.3.1.2 | OCTET STRING (SIZE(1..31)) | read-write | current |
| sensorPosition OBJECT-TYPE The Position by reference to the data center aisle. | 1.3.6.1.4.1.534.6.8.1.1.3.1.3 | PositionType | read-write | current |
| sensorElevation OBJECT-TYPE The Elevation in the rack. | 1.3.6.1.4.1.534.6.8.1.1.3.1.4 | ElevationType | read-write | current |
| sensorUElevation OBJECT-TYPE The elevation in the rack in count of U position from the bottom. | 1.3.6.1.4.1.534.6.8.1.1.3.1.5 | Integer32 | read-write | current |
| sensorMonitoringTable OBJECT-TYPE A list of sensor devices monitoring data. The number of entries is given by sensorCount. | 1.3.6.1.4.1.534.6.8.1.1.4 | not-accessible | current | |
| sensorMonitoringEntry OBJECT-TYPE An entry for a sensor device monitoring. | 1.3.6.1.4.1.534.6.8.1.1.4.1 | not-accessible | current | |
| sensorStatus OBJECT-TYPE Indicates how the sensor is communicating or not. | 1.3.6.1.4.1.534.6.8.1.1.4.1.1 | CommunicationStatus | read-only | current |
| sensorStatusSince OBJECT-TYPE UTC time in seconds since 1970/01/01 dating the sensor status last change. | 1.3.6.1.4.1.534.6.8.1.1.4.1.2 | UnixTimeStamp | read-only | current |
| sensorTemperatureCount OBJECT-TYPE Number of temperature probes managed by the sensor device. | 1.3.6.1.4.1.534.6.8.1.1.4.1.3 | Integer32 | read-only | current |
| sensorHumidityCount OBJECT-TYPE Number of humidity probes managed by the sensor device. | 1.3.6.1.4.1.534.6.8.1.1.4.1.4 | Integer32 | read-only | current |
| sensorDigitalInputCount OBJECT-TYPE Number of digital input probes managed by the sensor device. | 1.3.6.1.4.1.534.6.8.1.1.4.1.5 | Integer32 | read-only | current |
| sensorAnalogInputCount OBJECT-TYPE Number of analog input probes managed by the sensor device. | 1.3.6.1.4.1.534.6.8.1.1.4.1.6 | Integer32 | read-only | current |
| temperature OBJECT-IDENTITY | 1.3.6.1.4.1.534.6.8.1.2 | |||
| temperatureNotification OBJECT-IDENTITY | 1.3.6.1.4.1.534.6.8.1.2.0 | |||
| temperatureIdentificationTable OBJECT-TYPE A list of temperature probe measurements. the number of entries is given by the temperature count. | 1.3.6.1.4.1.534.6.8.1.2.1 | not-accessible | current | |
| temperatureIdentificationEntry OBJECT-TYPE An entry for a temperature probe identification. | 1.3.6.1.4.1.534.6.8.1.2.1.1 | not-accessible | current | |
| temperatureIndex OBJECT-TYPE A unique value for each temperature probe measurement. Its value ranges from 1 to sensorTemperatureCount. | 1.3.6.1.4.1.534.6.8.1.2.1.1.1 | Integer32 (1..2) | accessible-for-notify | current |
| temperatureUuid OBJECT-TYPE A unique uuid value for each temperature. | 1.3.6.1.4.1.534.6.8.1.2.1.1.2 | OCTET STRING | read-only | current |
| temperatureConnectionType OBJECT-TYPE Probe connection type with the sensor that monitors it. | 1.3.6.1.4.1.534.6.8.1.2.1.1.3 | ProbeConnectionType | read-only | current |
| temperatureConfigurationTable OBJECT-TYPE A list of temperature probe configuration. The number of entries is given by sensorTemperatureCount. | 1.3.6.1.4.1.534.6.8.1.2.2 | not-accessible | current | |
| temperatureConfigurationEntry OBJECT-TYPE An entry for a temperature probe configuration. | 1.3.6.1.4.1.534.6.8.1.2.2.1 | not-accessible | current | |
| temperatureName OBJECT-TYPE The friendly name of the sensor temperature probe. | 1.3.6.1.4.1.534.6.8.1.2.2.1.1 | OCTET STRING (SIZE(1..31)) | read-write | current |
| temperatureEnable OBJECT-TYPE Configure the temperature acquired or not. 0:disabled, 1:enabled | 1.3.6.1.4.1.534.6.8.1.2.2.1.2 | EnableType | read-write | current |
| temperatureOffset OBJECT-TYPE Configure the offset (Minus or Plus) to be added to the acquired value in order to correct the probe measurement error. See temperatureUnit data for the units. | 1.3.6.1.4.1.534.6.8.1.2.2.1.3 | Integer32 | read-write | current |
| temperatureAlarmEnable OBJECT-TYPE Configure the temperature alarm depending on the thresholds evaluated or not. 0:disabled, 1:enabled | 1.3.6.1.4.1.534.6.8.1.2.2.1.4 | EnableType | read-write | current |
| temperatureThresholdLowWarning OBJECT-TYPE Low warning temperature threshold. See temperatureUnit data for the units. | 1.3.6.1.4.1.534.6.8.1.2.2.1.5 | Integer32 | read-write | current |
| temperatureThresholdLowCritical OBJECT-TYPE Low critical temperature threshold. See temperatureUnit data for the units. | 1.3.6.1.4.1.534.6.8.1.2.2.1.6 | Integer32 | read-write | current |
| temperatureThresholdHighWarning OBJECT-TYPE High warning temperature threshold. See temperatureUnit data for the units. | 1.3.6.1.4.1.534.6.8.1.2.2.1.7 | Integer32 | read-write | current |
| temperatureThresholdHighCritical OBJECT-TYPE High critical temperature threshold. See temperatureUnit data for the units. | 1.3.6.1.4.1.534.6.8.1.2.2.1.8 | Integer32 | read-write | current |
| temperatureThresholdHysteresis OBJECT-TYPE Temperature threshold hysteresis. See temperatureUnit data for the units. | 1.3.6.1.4.1.534.6.8.1.2.2.1.9 | Integer32 | read-write | current |
| temperatureAlarmGracePeriod OBJECT-TYPE The grace period the alarm triggers after the acquired value crosses a trigger value (in seconds). | 1.3.6.1.4.1.534.6.8.1.2.2.1.10 | Integer32 (1..60) | read-write | current |
| temperatureMonitoringTable OBJECT-TYPE A list of temperature probe monitoring. The number of entries is given by sensorTemperatureCount. | 1.3.6.1.4.1.534.6.8.1.2.3 | not-accessible | current | |
| temperatureMonitoringEntry OBJECT-TYPE An entry for a temperature probe monitoring. | 1.3.6.1.4.1.534.6.8.1.2.3.1 | not-accessible | current | |
| temperatureAlarm OBJECT-TYPE Alarm set according to the realtime measure compared to the thresholds. | 1.3.6.1.4.1.534.6.8.1.2.3.1.1 | AlarmType | read-only | current |
| temperatureAlarmChangeSince OBJECT-TYPE UTC time in seconds since 1970/01/01 dating the temperature alarm last change. | 1.3.6.1.4.1.534.6.8.1.2.3.1.2 | UnixTimeStamp | read-only | current |
| temperatureValue OBJECT-TYPE Realtime measured value after correction with the offset. See temperatureUnit data for the units. | 1.3.6.1.4.1.534.6.8.1.2.3.1.3 | Integer32 | read-only | current |
| temperatureCommunicationStatus OBJECT-TYPE Indicates how the temperature probe is communicating or not. | 1.3.6.1.4.1.534.6.8.1.2.3.1.4 | CommunicationStatus | read-only | current |
| temperatureCommunicationStatusSince OBJECT-TYPE UTC time in seconds since 1970/01/01 dating the temperature communication status last change. | 1.3.6.1.4.1.534.6.8.1.2.3.1.5 | UnixTimeStamp | read-only | current |
| temperatureMonitoringMinMaxTable OBJECT-TYPE A list of temperature probe monitoring Min and Max. The number of entries is given by sensorTemperatureCount. | 1.3.6.1.4.1.534.6.8.1.2.4 | not-accessible | current | |
| temperatureMonitoringMinMaxEntry OBJECT-TYPE An entry for a temperature probe monitoring Min and Max. | 1.3.6.1.4.1.534.6.8.1.2.4.1 | not-accessible | current | |
| temperatureMinValue OBJECT-TYPE Minimum value registered since the 1st connection of the sensor or the last reset. See temperatureUnit data for the units. | 1.3.6.1.4.1.534.6.8.1.2.4.1.1 | Integer32 | read-only | current |
| temperatureMinValueSince OBJECT-TYPE UTC time in seconds since 1970/01/01 dating the temperature min value last change. | 1.3.6.1.4.1.534.6.8.1.2.4.1.2 | UnixTimeStamp | read-only | current |
| temperatureMaxValue OBJECT-TYPE Maximum value registered since the 1st connection of the sensor or the last reset. See temperatureUnit data for the units. | 1.3.6.1.4.1.534.6.8.1.2.4.1.3 | Integer32 | read-only | current |
| temperatureMaxValueSince OBJECT-TYPE UTC time in seconds since 1970/01/01 dating the temperature max value last change. | 1.3.6.1.4.1.534.6.8.1.2.4.1.4 | UnixTimeStamp | read-only | current |
| temperatureResetMinMax OBJECT-TYPE Command that resets the min and max data with the current measure. 0:None, 1:Reset | 1.3.6.1.4.1.534.6.8.1.2.4.1.5 | ResetCommandType | read-write | current |
| temperatureUnit OBJECT-TYPE Temperature unit configuration. It is a global setting for all the v1 and v3 SNMP client. It does not involve the temperature unit of data stored and managed in the card. But it does configure the unit the temperatures data are red and written in this Mib. The possible values are tenthOfDegCelsius(0), tenthOfDegFarhenheit(1), tenthOfDegKelvin(2). | 1.3.6.1.4.1.534.6.8.1.2.5 | TemperatureUnitType | read-write | current |
| humidity OBJECT-IDENTITY | 1.3.6.1.4.1.534.6.8.1.3 | |||
| humidityNotification OBJECT-IDENTITY | 1.3.6.1.4.1.534.6.8.1.3.0 | |||
| humidityIdentificationTable OBJECT-TYPE A list of humidity probe measurements. the number of entries is given by the humidity count. | 1.3.6.1.4.1.534.6.8.1.3.1 | not-accessible | current | |
| humidityIdentificationEntry OBJECT-TYPE An entry for a humidity probe identification. | 1.3.6.1.4.1.534.6.8.1.3.1.1 | not-accessible | current | |
| humidityIndex OBJECT-TYPE A unique value for each humidity probe measurement. Its value ranges from 1 to sensorhumidityCount. | 1.3.6.1.4.1.534.6.8.1.3.1.1.1 | Integer32 (1..2) | accessible-for-notify | current |
| humidityUuid OBJECT-TYPE A unique uuid value for each humidity. | 1.3.6.1.4.1.534.6.8.1.3.1.1.2 | OCTET STRING | read-only | current |
| humidityConnectionType OBJECT-TYPE Probe connection type with the sensor that monitors it. | 1.3.6.1.4.1.534.6.8.1.3.1.1.3 | ProbeConnectionType | read-only | current |
| humidityConfigurationTable OBJECT-TYPE A list of humidity probe configuration. The number of entries is given by sensorhumidityCount. | 1.3.6.1.4.1.534.6.8.1.3.2 | not-accessible | current | |
| humidityConfigurationEntry OBJECT-TYPE An entry for a humidity probe configuration. | 1.3.6.1.4.1.534.6.8.1.3.2.1 | not-accessible | current | |
| humidityName OBJECT-TYPE The friendly name of the sensor humidity probe. | 1.3.6.1.4.1.534.6.8.1.3.2.1.1 | OCTET STRING (SIZE(1..31)) | read-write | current |
| humidityEnable OBJECT-TYPE Configure the humidity acquired or not. 0:disabled, 1:enabled | 1.3.6.1.4.1.534.6.8.1.3.2.1.2 | EnableType | read-write | current |
| humidityOffset OBJECT-TYPE Configure the offset (Minus or Plus) to be added to the acquired value in order to correct the probe measurement error. in tenth of % units. | 1.3.6.1.4.1.534.6.8.1.3.2.1.3 | Integer32 | read-write | current |
| humidityAlarmEnable OBJECT-TYPE Configure the humidity alarm depending on the thresholds evaluated or not. 0:disabled, 1:enabled | 1.3.6.1.4.1.534.6.8.1.3.2.1.4 | EnableType | read-write | current |
| humidityThresholdLowWarning OBJECT-TYPE Low warning humidity threshold in tenth of % units. | 1.3.6.1.4.1.534.6.8.1.3.2.1.5 | Integer32 | read-write | current |
| humidityThresholdLowCritical OBJECT-TYPE Low critical humidity threshold in tenth of % units. | 1.3.6.1.4.1.534.6.8.1.3.2.1.6 | Integer32 | read-write | current |
| humidityThresholdHighWarning OBJECT-TYPE High warning humidity threshold in tenth of % units. | 1.3.6.1.4.1.534.6.8.1.3.2.1.7 | Integer32 | read-write | current |
| humidityThresholdHighCritical OBJECT-TYPE High critical humidity threshold in tenth of % units. | 1.3.6.1.4.1.534.6.8.1.3.2.1.8 | Integer32 | read-write | current |
| humidityThresholdHysteresis OBJECT-TYPE humidity threshold hysteresis in tenth of % units. | 1.3.6.1.4.1.534.6.8.1.3.2.1.9 | Integer32 | read-write | current |
| humidityAlarmGracePeriod OBJECT-TYPE The grace period the alarm triggers after the acquired value crosses a trigger value (in seconds). | 1.3.6.1.4.1.534.6.8.1.3.2.1.10 | Integer32 (1..60) | read-write | current |
| humidityMonitoringTable OBJECT-TYPE A list of humidity probe monitoring. The number of entries is given by sensorhumidityCount. | 1.3.6.1.4.1.534.6.8.1.3.3 | not-accessible | current | |
| humidityMonitoringEntry OBJECT-TYPE An entry for a humidity probe monitoring. | 1.3.6.1.4.1.534.6.8.1.3.3.1 | not-accessible | current | |
| humidityAlarm OBJECT-TYPE Alarm set according to the realtime measure compared to the thresholds. | 1.3.6.1.4.1.534.6.8.1.3.3.1.1 | AlarmType | read-only | current |
| humidityAlarmChangeSince OBJECT-TYPE UTC time in seconds since 1970/01/01 dating the humidity alarm last change. | 1.3.6.1.4.1.534.6.8.1.3.3.1.2 | UnixTimeStamp | read-only | current |
| humidityValue OBJECT-TYPE Realtime measured value after correction with the offset. in tenth of % units. | 1.3.6.1.4.1.534.6.8.1.3.3.1.3 | Integer32 | read-only | current |
| humidityCommunicationStatus OBJECT-TYPE Indicates how the humidity probe is communicating or not. | 1.3.6.1.4.1.534.6.8.1.3.3.1.4 | CommunicationStatus | read-only | current |
| humidityCommunicationStatusSince OBJECT-TYPE UTC time in seconds since 1970/01/01 dating the humidity communication status last change. | 1.3.6.1.4.1.534.6.8.1.3.3.1.5 | UnixTimeStamp | read-only | current |
| humidityMonitoringMinMaxTable OBJECT-TYPE A list of humidity probe monitoring Min and Max. The number of entries is given by sensorhumidityCount. | 1.3.6.1.4.1.534.6.8.1.3.4 | not-accessible | current | |
| humidityMonitoringMinMaxEntry OBJECT-TYPE An entry for a humidity probe monitoring Min and Max. | 1.3.6.1.4.1.534.6.8.1.3.4.1 | not-accessible | current | |
| humidityMinValue OBJECT-TYPE Minimum value registered since the 1st connection of the sensor or the last reset. in tenth of % units. | 1.3.6.1.4.1.534.6.8.1.3.4.1.1 | Integer32 | read-only | current |
| humidityMinValueSince OBJECT-TYPE UTC time in seconds since 1970/01/01 dating the humidity min value last change. | 1.3.6.1.4.1.534.6.8.1.3.4.1.2 | UnixTimeStamp | read-only | current |
| humidityMaxValue OBJECT-TYPE Maximum value registered since the 1st connection of the sensor or the last reset. in tenth of % units. | 1.3.6.1.4.1.534.6.8.1.3.4.1.3 | Integer32 | read-only | current |
| humidityMaxValueSince OBJECT-TYPE UTC time in seconds since 1970/01/01 dating the humidity max value last change. | 1.3.6.1.4.1.534.6.8.1.3.4.1.4 | UnixTimeStamp | read-only | current |
| humidityResetMinMax OBJECT-TYPE Command that resets the min and max data with the current measure. 0:None, 1:Reset | 1.3.6.1.4.1.534.6.8.1.3.4.1.5 | ResetCommandType | read-write | current |
| digitalInput OBJECT-IDENTITY | 1.3.6.1.4.1.534.6.8.1.4 | |||
| digitalInputNotification OBJECT-IDENTITY | 1.3.6.1.4.1.534.6.8.1.4.0 | |||
| digitalInputIdentificationTable OBJECT-TYPE A list of digital input probe measurements. The number of entries is given by sensorDigitalInputCount. | 1.3.6.1.4.1.534.6.8.1.4.1 | not-accessible | current | |
| digitalInputIdentificationEntry OBJECT-TYPE An entry for a digital input identification. | 1.3.6.1.4.1.534.6.8.1.4.1.1 | not-accessible | current | |
| digitalInputIndex OBJECT-TYPE A unique value for each digital input probe measurement. Its value ranges from 1 to sensorDigitalInputCount. | 1.3.6.1.4.1.534.6.8.1.4.1.1.1 | Integer32 (1..2) | accessible-for-notify | current |
| digitalInputUuid OBJECT-TYPE A unique uuid value for each digital Input. | 1.3.6.1.4.1.534.6.8.1.4.1.1.2 | OCTET STRING | read-only | current |
| digitalInputConnectionType OBJECT-TYPE Probe connection type with the sensor that monitors it. | 1.3.6.1.4.1.534.6.8.1.4.1.1.3 | ProbeConnectionType | read-only | current |
| digitalInputConfigurationTable OBJECT-TYPE A list of digital input probe configuration. The number of entries is given by sensorDigitalInputCount. | 1.3.6.1.4.1.534.6.8.1.4.2 | not-accessible | current | |
| digitalInputConfigurationEntry OBJECT-TYPE An entry for a digital input probe configuration. | 1.3.6.1.4.1.534.6.8.1.4.2.1 | not-accessible | current | |
| digitalInputName OBJECT-TYPE The friendly name of the digital input probe. | 1.3.6.1.4.1.534.6.8.1.4.2.1.1 | OCTET STRING (SIZE(1..31)) | read-write | current |
| digitalInputEnable OBJECT-TYPE Configure the digital input acquired or not. 0:disabled, 1:enabled | 1.3.6.1.4.1.534.6.8.1.4.2.1.2 | EnableType | read-write | current |
| digitalInputPolarity OBJECT-TYPE Configure the digitalInput polarity. 0 : Normally opened, 1 : Normally closed | 1.3.6.1.4.1.534.6.8.1.4.2.1.3 | PolarityType | read-write | current |
| digitalInputAlarmEnable OBJECT-TYPE Configure the digitalInput alarm depending on the polarity evaluated or not. 0:disabled, 1:enabled | 1.3.6.1.4.1.534.6.8.1.4.2.1.4 | EnableType | read-write | current |
| digitalInputAlarmSeverity OBJECT-TYPE Configure the alarm severity. | 1.3.6.1.4.1.534.6.8.1.4.2.1.5 | AlarmSeverityType | read-write | current |
| digitalInputAlarmGracePeriod OBJECT-TYPE The delay the alarm triggers when the state change event occurs (in seconds). | 1.3.6.1.4.1.534.6.8.1.4.2.1.6 | Integer32 (1..60) | read-write | current |
| digitalInputMonitoringTable OBJECT-TYPE A list of digital input probee monitoring. The number of entries is given by sensorDigitalInputCount. | 1.3.6.1.4.1.534.6.8.1.4.3 | not-accessible | current | |
| digitalInputMonitoringEntry OBJECT-TYPE An entry for a digital Input probe. | 1.3.6.1.4.1.534.6.8.1.4.3.1 | not-accessible | current | |
| digitalInputAlarm OBJECT-TYPE Alarm set according to the polarity and alarm severity configuration. | 1.3.6.1.4.1.534.6.8.1.4.3.1.1 | AlarmLevelType | read-only | current |
| digitalInputAlarmChangeSince OBJECT-TYPE UTC time in seconds since 1970/01/01 dating the digital input alarm last change. | 1.3.6.1.4.1.534.6.8.1.4.3.1.2 | UnixTimeStamp | read-only | current |
| digitalInputState OBJECT-TYPE Measure of the digital input after applying the polarity configured. 0 : Inactive, 1 : Active | 1.3.6.1.4.1.534.6.8.1.4.3.1.3 | StateType | read-only | current |
| digitalInputStateSince OBJECT-TYPE UTC time in seconds since 1970/01/01 dating the digital input state last change. | 1.3.6.1.4.1.534.6.8.1.4.3.1.4 | UnixTimeStamp | read-only | current |
| digitalInputCommunicationStatus OBJECT-TYPE Indicates how the digital input is communicating or not. | 1.3.6.1.4.1.534.6.8.1.4.3.1.5 | CommunicationStatus | read-only | current |
| digitalInputCommunicationStatusSince OBJECT-TYPE UTC time in seconds since 1970/01/01 dating the digital input communication status last change. | 1.3.6.1.4.1.534.6.8.1.4.3.1.6 | UnixTimeStamp | read-only | current |
| conformance OBJECT-IDENTITY | 1.3.6.1.4.1.534.6.8.1.10 | |||
| objectGroups OBJECT-IDENTITY | 1.3.6.1.4.1.534.6.8.1.10.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| notifySensorCount NOTIFICATION-TYPE Sent whenever the sensor count changes after a discovery or removing from the UI. | 1.3.6.1.4.1.534.6.8.1.1.0.1 | current |
| notifySensorStatus NOTIFICATION-TYPE Sent whenever the sensor status changes. | 1.3.6.1.4.1.534.6.8.1.1.0.2 | current |
| notifyTemperatureAlarm NOTIFICATION-TYPE Sent whenever the temperature alarm changes. | 1.3.6.1.4.1.534.6.8.1.2.0.1 | current |
| notifyTemperatureCommunicationStatus NOTIFICATION-TYPE Sent whenever the temperature communication status changes. Is not implemented when the probe is internal (see temperatureConnectionType). | 1.3.6.1.4.1.534.6.8.1.2.0.2 | current |
| notifyHumidityAlarm NOTIFICATION-TYPE Sent whenever the humidity alarm changes. | 1.3.6.1.4.1.534.6.8.1.3.0.1 | current |
| notifyHumidityCommunicationStatus NOTIFICATION-TYPE Sent whenever the humidity communication status changes. Is not implemented when the probe is internal (see humidityConnectionType). | 1.3.6.1.4.1.534.6.8.1.3.0.2 | current |
| notifyDigitalInputAlarm NOTIFICATION-TYPE Sent whenever the digital input alarm changes. | 1.3.6.1.4.1.534.6.8.1.4.0.1 | current |
| notifydigitalInputCommunicationStatus NOTIFICATION-TYPE Sent whenever the digital input communication status changes. Is not implemented when the probe is internal (see digitalInputConnectionType). | 1.3.6.1.4.1.534.6.8.1.4.0.2 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| eatonSensorCompliances MODULE-COMPLIANCE The requirements for conforming to the Sensor MIB. | 1.3.6.1.4.1.534.6.8.1.10.1 | current |
| sensorRequiredGroup OBJECT-GROUP These objects are required to conform to this MIB. | 1.3.6.1.4.1.534.6.8.1.10.2.1 | current |
| sensorOptionalGroup OBJECT-GROUP These objects in this MIB are optional. | 1.3.6.1.4.1.534.6.8.1.10.2.2 | current |
| sensorNotifyGroup NOTIFICATION-GROUP These notifications will be supported depending on the features of the sensor. | 1.3.6.1.4.1.534.6.8.1.10.2.3 | current |