MIBs Depot

E5-111-IESCOMMON-MIB

Registered at
1.3.6.1.4.1.6321.1.2.3.2.98.1
1.3.6.1.4.1.6321.1.2.3.2.98.2
1.3.6.1.4.1.6321.1.2.3.2.98.3
1.3.6.1.4.1.6321.1.2.3.2.98.4
Namespace
calix
Source file
E5-111-IESCOMMON-MIB
Digest
sha256:ad3e7bf87bfa120e8df144d8b30849ba58945cb7770739ee47f8fc7a6772b3dc

Imports

FromSymbols
E5-111-MIBe5x111, iesSeriesCommon
IF-MIBifIndex
Q-BRIDGE-MIBPortList
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIIpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, enterprises, iso
SNMPv2-TCDisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION

Imported by

1 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
E5-111-IESCOMMON-MIB
E5-111-MIB
IANAifType-MIB
IF-MIB
P-BRIDGE-MIB
Q-BRIDGE-MIB
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
TOKEN-RING-RMON-MIB

Objects

NameOIDSyntaxAccessStatus
iesChassis
OBJECT-IDENTITY
1.3.6.1.4.1.6321.1.2.3.2.98.1
iesNumOfChassis
OBJECT-TYPE
The number of chassis in the IES-2000/3000 system
1.3.6.1.4.1.6321.1.2.3.2.98.1.1INTEGERread-onlycurrent
iesChassisTable
OBJECT-TYPE
The table which contains the chassis information in IES-2000/3000 system
1.3.6.1.4.1.6321.1.2.3.2.98.1.2not-accessiblecurrent
iesChassisEntry
OBJECT-TYPE
1.3.6.1.4.1.6321.1.2.3.2.98.1.2.1not-accessiblecurrent
iesChassisId
OBJECT-TYPE
The Chassis ID
1.3.6.1.4.1.6321.1.2.3.2.98.1.2.1.1INTEGERread-onlycurrent
iesChassisFrameNumber
OBJECT-TYPE
The Frame ID
1.3.6.1.4.1.6321.1.2.3.2.98.1.2.1.2INTEGERread-writecurrent
iesChassisSerialNumber
OBJECT-TYPE
The Chassis Serial Number
1.3.6.1.4.1.6321.1.2.3.2.98.1.2.1.3DisplayStringread-onlycurrent
iesChassisNumber
OBJECT-TYPE
The Chassis Number which is defined by the system administrator for management purpose
1.3.6.1.4.1.6321.1.2.3.2.98.1.2.1.4INTEGERread-writecurrent
iesChassisStatus
OBJECT-TYPE
The current status of the chassis.
1.3.6.1.4.1.6321.1.2.3.2.98.1.2.1.5INTEGER {empty(1), up(2), down(3), testing(4)}read-onlycurrent
iesChassisProductPartNumber
OBJECT-TYPE
Product part number
1.3.6.1.4.1.6321.1.2.3.2.98.1.2.1.6DisplayStringread-onlycurrent
iesChassisHwRevisionNumber
OBJECT-TYPE
HW revision Number
1.3.6.1.4.1.6321.1.2.3.2.98.1.2.1.7DisplayStringread-onlycurrent
iesChassisCleiCode
OBJECT-TYPE
CLEI code
1.3.6.1.4.1.6321.1.2.3.2.98.1.2.1.8DisplayStringread-onlycurrent
iesChassisHwVersion
OBJECT-TYPE
Hardware version
1.3.6.1.4.1.6321.1.2.3.2.98.1.2.1.9DisplayStringread-onlycurrent
iesChassisMacAddress
OBJECT-TYPE
MAC address
1.3.6.1.4.1.6321.1.2.3.2.98.1.2.1.10DisplayStringread-onlycurrent
iesChassisVoipDspVersion
OBJECT-TYPE
Voip dsp version
1.3.6.1.4.1.6321.1.2.3.2.98.1.2.1.11DisplayStringread-onlycurrent
iesChassisCodecVersion
OBJECT-TYPE
Codec F/W version
1.3.6.1.4.1.6321.1.2.3.2.98.1.2.1.12DisplayStringread-onlycurrent
iesSlotTable
OBJECT-TYPE
The table which contains the slot information in a chassis of IES-2000/3000 system
1.3.6.1.4.1.6321.1.2.3.2.98.1.3not-accessiblecurrent
iesSlotEntry
OBJECT-TYPE
1.3.6.1.4.1.6321.1.2.3.2.98.1.3.1not-accessiblecurrent
iesSlotId
OBJECT-TYPE
Identity of the slot
1.3.6.1.4.1.6321.1.2.3.2.98.1.3.1.1INTEGERread-onlycurrent
iesSlotModuleType
OBJECT-TYPE
Card type of the plug-in card in IES-2000/3000.
1.3.6.1.4.1.6321.1.2.3.2.98.1.3.1.2INTEGER {unknown(1), msc1000-L2(2), msc1000-ML(3), alc1024-61(4), vlc1012(5), slc1024(6), alc1024-63(7), msc1000A(8), vlc1124(9), alc1224-71(10), alc1224-73(11), slc1224-22(12), alc1224-51(13), alc1224-53(14)}read-onlycurrent
iesSlotModuleDescr
OBJECT-TYPE
The descriptions of the plug-in card in IES-2000/3000.
1.3.6.1.4.1.6321.1.2.3.2.98.1.3.1.3DisplayStringread-onlycurrent
iesSlotModuleFWVersion
OBJECT-TYPE
The firmware version of the plug-in card in IES-2000/3000.
1.3.6.1.4.1.6321.1.2.3.2.98.1.3.1.4DisplayStringread-onlycurrent
iesSlotModuleDriverVersion
OBJECT-TYPE
The DSL driver of the plug-in card in IES-2000/3000.
1.3.6.1.4.1.6321.1.2.3.2.98.1.3.1.5DisplayStringread-onlycurrent
iesSlotModuleModemCodeVersion
OBJECT-TYPE
The DSL modem code version of the plug-in card in IES-2000/3000
1.3.6.1.4.1.6321.1.2.3.2.98.1.3.1.6DisplayStringread-onlycurrent
iesSlotModuleStatus
OBJECT-TYPE
The module state of the plug-in card in IES-2000/3000
1.3.6.1.4.1.6321.1.2.3.2.98.1.3.1.7INTEGER {empty(1), up(2), down(3), testing(4), standby(5)}read-onlycurrent
iesSlotModuleAlarmStatus
OBJECT-TYPE
This variable indicates the alarm status of the module. It is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The moduleNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 moduleNoDefect 2 moduleOverHeat 3 moduleFanRpmLow 4 moduleVoltageLow 5 moduleThermalSensorFailure 6 modulePullOut 7 powerDC48VAFailure 8 powerDC48VBFailure 9 extAlarmInputTrigger 10 moduleDown 11 mscSwitchOverOK 12 networkTopologyChange
1.3.6.1.4.1.6321.1.2.3.2.98.1.3.1.8INTEGER (0..255)read-onlycurrent
iesMscPortConfTable
OBJECT-TYPE
The table contains port configuration information in MSC1000.
1.3.6.1.4.1.6321.1.2.3.2.98.1.4not-accessiblecurrent
iesMscPortConfEntry
OBJECT-TYPE
1.3.6.1.4.1.6321.1.2.3.2.98.1.4.1not-accessiblecurrent
iesMscPortId
OBJECT-TYPE
Identity of the extension slot in MSC1000.
1.3.6.1.4.1.6321.1.2.3.2.98.1.4.1.1INTEGERread-onlycurrent
iesMscPortType
OBJECT-TYPE
Port type of the extension slot in MSC1000.
1.3.6.1.4.1.6321.1.2.3.2.98.1.4.1.2INTEGER {unknown(1), e1000BaseT(2), e1000BaseLX(3), e1000BaseSX(4), e100BaseFX(5), e100BaseTX(6), e1000BaseGBIC(7)}read-onlycurrent
iesMscPortIfIndex
OBJECT-TYPE
1.3.6.1.4.1.6321.1.2.3.2.98.1.4.1.3INTEGERread-onlycurrent
iesMscPortSpeed
OBJECT-TYPE
1.3.6.1.4.1.6321.1.2.3.2.98.1.4.1.4INTEGER {auto(1), e1000M(2), e100M(3), e10M(4)}read-writecurrent
iesMscPortDuplex
OBJECT-TYPE
1.3.6.1.4.1.6321.1.2.3.2.98.1.4.1.5INTEGER {full(1), half(2)}read-writecurrent
iesMscPortFlowControl
OBJECT-TYPE
1.3.6.1.4.1.6321.1.2.3.2.98.1.4.1.6INTEGER {true(1), false(2)}read-writecurrent
iesMscPortDefaultVLANTagging
OBJECT-TYPE
1.3.6.1.4.1.6321.1.2.3.2.98.1.4.1.7INTEGER {true(1), false(2)}read-writecurrent
iesMscPortTrunkGroupId
OBJECT-TYPE
1.3.6.1.4.1.6321.1.2.3.2.98.1.4.1.8INTEGERread-onlycurrent
iesMscPortMode
OBJECT-TYPE
The operational mode for uplink and subtending ports in MSC. Only the operational mode of subtending ports can be modified.
1.3.6.1.4.1.6321.1.2.3.2.98.1.4.1.9INTEGER {uplink(1), subtending(2)}read-writecurrent
iesMscPortVLANTrunking
OBJECT-TYPE
The VLAN trunking setting for uplink and subtending ports in MSC.
1.3.6.1.4.1.6321.1.2.3.2.98.1.4.1.10INTEGER {enable(1), disable(2)}read-writecurrent
iesHWMonitor
OBJECT-IDENTITY
1.3.6.1.4.1.6321.1.2.3.2.98.2
iesFanRpmTable
OBJECT-TYPE
A table that contains rpm information about the fans.
1.3.6.1.4.1.6321.1.2.3.2.98.2.1not-accessiblecurrent
iesFanRpmEntry
OBJECT-TYPE
A list of rpm information for each fan.
1.3.6.1.4.1.6321.1.2.3.2.98.2.1.1not-accessiblecurrent
iesFanRpmIndex
OBJECT-TYPE
The identity of the fan.
1.3.6.1.4.1.6321.1.2.3.2.98.2.1.1.1INTEGERread-onlycurrent
iesFanRpmCurValue
OBJECT-TYPE
The current rpm of the fan.
1.3.6.1.4.1.6321.1.2.3.2.98.2.1.1.2INTEGERread-onlycurrent
iesFanRpmMaxValue
OBJECT-TYPE
The maximum rpm ever performed by the fan.
1.3.6.1.4.1.6321.1.2.3.2.98.2.1.1.3INTEGERread-onlycurrent
iesFanRpmMinValue
OBJECT-TYPE
The minimum rpm ever performed by the fan.
1.3.6.1.4.1.6321.1.2.3.2.98.2.1.1.4INTEGERread-onlycurrent
iesFanRpmLowThresh
OBJECT-TYPE
The low threshold of the rpm of the fan. If the current rpm is less than the threshold, the device will initiate the fanRpmLow trap.
1.3.6.1.4.1.6321.1.2.3.2.98.2.1.1.5INTEGERread-onlycurrent
iesFanRpmDescr
OBJECT-TYPE
The description of the fan (e.g. location, function, etc.).
1.3.6.1.4.1.6321.1.2.3.2.98.2.1.1.6DisplayStringread-onlycurrent
iesVoltageTable
OBJECT-TYPE
A table that contains voltage information about the system.
1.3.6.1.4.1.6321.1.2.3.2.98.2.2not-accessiblecurrent
iesVoltageEntry
OBJECT-TYPE
A list of voltage information for each sensor.
1.3.6.1.4.1.6321.1.2.3.2.98.2.2.1not-accessiblecurrent
iesVoltageIndex
OBJECT-TYPE
The identity of the sensor.
1.3.6.1.4.1.6321.1.2.3.2.98.2.2.1.1INTEGERread-onlycurrent
iesVoltageCurValue
OBJECT-TYPE
The current voltage detected by the sensor (in milli-voltage).
1.3.6.1.4.1.6321.1.2.3.2.98.2.2.1.2INTEGERread-onlycurrent
iesVoltageMaxValue
OBJECT-TYPE
The maximum voltage ever detected by the sensor (in milli-voltage).
1.3.6.1.4.1.6321.1.2.3.2.98.2.2.1.3INTEGERread-onlycurrent
iesVoltageMinValue
OBJECT-TYPE
The minimum voltage ever detected by the sensor (in milli-voltage).
1.3.6.1.4.1.6321.1.2.3.2.98.2.2.1.4INTEGERread-onlycurrent
iesVoltageNominalValue
OBJECT-TYPE
The nominal voltage which the power should supply (in milli-voltage).
1.3.6.1.4.1.6321.1.2.3.2.98.2.2.1.5INTEGERread-onlycurrent
iesVoltageLowThresh
OBJECT-TYPE
The low threshold of the voltage (in milli-voltage). If the current voltage is less than the threshold, the device will initiate the voltageLow trap.
1.3.6.1.4.1.6321.1.2.3.2.98.2.2.1.6INTEGERread-onlycurrent
iesVoltageDescr
OBJECT-TYPE
The description of the voltage (e.g. location, nominal value, etc.).
1.3.6.1.4.1.6321.1.2.3.2.98.2.2.1.7DisplayStringread-onlycurrent
iesSysTempTable
OBJECT-TYPE
A table that contains temperature information about system.
1.3.6.1.4.1.6321.1.2.3.2.98.2.3not-accessiblecurrent
iesSysTempEntry
OBJECT-TYPE
A list of temperature information for each sensor.
1.3.6.1.4.1.6321.1.2.3.2.98.2.3.1not-accessiblecurrent
iesSysTempIndex
OBJECT-TYPE
The identity of the sensor.
1.3.6.1.4.1.6321.1.2.3.2.98.2.3.1.1INTEGERread-onlycurrent
iesSysTempCurValue
OBJECT-TYPE
The current temperature detected in Celsius by the sensor.
1.3.6.1.4.1.6321.1.2.3.2.98.2.3.1.2INTEGERread-onlycurrent
iesSysTempMaxValue
OBJECT-TYPE
The maximum temperature ever detected in Celsius by the sensor.
1.3.6.1.4.1.6321.1.2.3.2.98.2.3.1.3INTEGERread-onlycurrent
iesSysTempMinValue
OBJECT-TYPE
The minimum temperature ever detected in Celsius by the sensor.
1.3.6.1.4.1.6321.1.2.3.2.98.2.3.1.4INTEGERread-onlycurrent
iesSysTempHighThresh
OBJECT-TYPE
The high threshold of the temperature in Celsius. If the current temperature is higher than the threshold, the device will initiate the overheat trap.
1.3.6.1.4.1.6321.1.2.3.2.98.2.3.1.5INTEGERread-onlycurrent
iesSysTempDescr
OBJECT-TYPE
The description of the temperature sensor (e.g. location, function, etc.).
1.3.6.1.4.1.6321.1.2.3.2.98.2.3.1.6DisplayStringread-onlycurrent
iesSysMgnt
OBJECT-IDENTITY
1.3.6.1.4.1.6321.1.2.3.2.98.3
iesSysState
OBJECT-IDENTITY
1.3.6.1.4.1.6321.1.2.3.2.98.3.1
iesSystemCurrentStatus
OBJECT-TYPE
This variable indicates the status of the system. The sysCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The sysNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 sysNoDefect 2 sysOverHeat 3 sysFanRpmLow 4 sysVoltageLow 5 sysThermalSensorFailure 6 modulePullOut 7 powerDC48VAFailure 8 powerDC48VBFailure 9 extAlarmInputTrigger 10 moduleDown 11 mscSwitchOverOK 12 networkTopologyChange
1.3.6.1.4.1.6321.1.2.3.2.98.3.1.1INTEGER (0..255)read-onlycurrent
iesProblemCause
OBJECT-TYPE
It describes the problem occurred in the system, e.g. maintenance operation failures, system reboot, error log, ...etc.
1.3.6.1.4.1.6321.1.2.3.2.98.3.1.2DisplayStringread-onlycurrent
iesSysMaintenance
OBJECT-IDENTITY
1.3.6.1.4.1.6321.1.2.3.2.98.3.2
iesMaintenanceOps
OBJECT-TYPE
The managed object is for system maintenance. When the EMS wants to trigger the system maitenance operation, the EMS shall send SNMP-SET message to set the corresponding bit value to be 1. The various bit positions are: BIT 1: config save BIT 2: reset BIT 3: local loopback test BIT 4: remote loopback test BIT 5: clear system alarms BIT 6: F4 loopback test BIT 7: F5 loopback test BIT 8: DSL Line Diagnostic
1.3.6.1.4.1.6321.1.2.3.2.98.3.2.1INTEGERread-writecurrent
iesMaintenanceTarget
OBJECT-TYPE
The managed object is used for identify the target on which the maintenance operation should be performed.
1.3.6.1.4.1.6321.1.2.3.2.98.3.2.2INTEGER (1..48)read-writecurrent
iesMaintenanceDSLConfOps
OBJECT-TYPE
The managed object is for xDSL line configuration. When the EMS wants to issue the desired operation, the EMS shall send SNMP-SET message to set the corresponding bit value to be 1. The various bit positions are: BIT 1: enable port BIT 2: disable port BIT 3: set DSL mode BIT 4: set profile BIT 5: enable mac filter BIT 6: disable mac filter BIT 7: set packet filter BIT 8: enable dot1x BIT 9: disable dot1x BIT 10: set dot1x control BIT 11: enable dot1x re-authentication BIT 12: disable dot1x re-authentication BIT 13: set dot1x re-authentication period BIT 14: enable mac count filter BIT 15: disable mac count filter BIT 16: set mac count filter BIT 17: set alarm profile BIT 18: set Annex L (Only in AnnexA) BIT 19: set power management BIT 20: set rate adaptation mode BIT 21: set IGMP filter (Not support after E5-111 v3.0) BIT 22: enable Annex M BIT 23: disable Annex M
1.3.6.1.4.1.6321.1.2.3.2.98.3.2.3INTEGERread-writecurrent
iesMaintenanceDSLConfTarget
OBJECT-TYPE
The managed object is used for identify the target on which the line configuration should be performed. The target is encoded as: Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7 Byte 2~3: each octet specifies a set of eight slots, with the first octet specifying slots 1 through 8 and the second octet specifying slots 9 through 16. Byte 4: reserved Byte 5~11: each octet specifies a set of eight ports, with the first octet specifying ports 1 through 8, etc.
1.3.6.1.4.1.6321.1.2.3.2.98.3.2.4OCTET STRINGread-writecurrent
iesMaintenanceDSLConfProfileName
OBJECT-TYPE
The DSL profile name
1.3.6.1.4.1.6321.1.2.3.2.98.3.2.5DisplayString (SIZE(1..31))read-writecurrent
iesMaintenanceDSLConfMode
OBJECT-TYPE
The DSL mode. The semantic for each bit is: Bit 1: ADSL, G.lite Bit 2: ADSL, G.dmt Bit 3: ADSL, T1.413 Bit 4: ADSL, Auto Bit 5: ADSL, ETSI Bit 6: ADSL2, Bit 7: ADSL2+
1.3.6.1.4.1.6321.1.2.3.2.98.3.2.6INTEGERread-writecurrent
iesMaintenanceDSLConfPktFilter
OBJECT-TYPE
The packet filter. The semantic for each bit is: Bit 1: accept all Bit 2: accept PPPoE only Bit 3: reject ARP Bit 4: reject DHCP Bit 5: reject EAPOL Bit 6: reject PPPoE Bit 7: reject NetBIOS Bit 8: reject IGMP Bit 9: reject IP
1.3.6.1.4.1.6321.1.2.3.2.98.3.2.7INTEGERread-writecurrent
iesMaintenanceDSLConfDot1xControl
OBJECT-TYPE
The configuration defines the 802.1x control type.
1.3.6.1.4.1.6321.1.2.3.2.98.3.2.8INTEGER {auto(1), forceAuth(2), forceUnAuth(3)}read-writecurrent
iesMaintenanceDSLConfDot1xReauthPeriod
OBJECT-TYPE
The configuration defines the 802.1x re-authentication period (seconds).
1.3.6.1.4.1.6321.1.2.3.2.98.3.2.9INTEGERread-writecurrent
iesMaintenanceDSLConfMacCount
OBJECT-TYPE
The configuration defines the number of mac addresses which can pass through the port.
1.3.6.1.4.1.6321.1.2.3.2.98.3.2.10INTEGERread-writecurrent
iesMaintenanceVpi
OBJECT-TYPE
VPI of the channel
1.3.6.1.4.1.6321.1.2.3.2.98.3.2.11INTEGER (0..255)read-writecurrent
iesMaintenanceVci
OBJECT-TYPE
VCI of the channel
1.3.6.1.4.1.6321.1.2.3.2.98.3.2.12INTEGER (1..65535)read-writecurrent
iesMaintenanceDSLConfAlarmProfileName
OBJECT-TYPE
The DSL alarm profile name
1.3.6.1.4.1.6321.1.2.3.2.98.3.2.13OCTET STRING (SIZE(1..31))read-writecurrent
iesMaintenanceDSLConfAnnexL
OBJECT-TYPE
The annex L setting of the ADSL line (Only in AnnexA).
1.3.6.1.4.1.6321.1.2.3.2.98.3.2.14INTEGER {enableNarrowMode(1), enableWideMode(2), disable(3)}read-writecurrent
iesMaintenanceDSLConfPmMode
OBJECT-TYPE
The power management mode of the ADSL line.
1.3.6.1.4.1.6321.1.2.3.2.98.3.2.15INTEGER {enableL2Mode(1), enableL3Mode(2), disable(3)}read-writecurrent
iesMaintenanceDSLConfRateMode
OBJECT-TYPE
Defines what form of transmit rate adaptation is configured on this modem. See ADSL Forum TR-005 [3] for more information.
1.3.6.1.4.1.6321.1.2.3.2.98.3.2.16INTEGER {fixed(1), adaptAtStartup(2), adaptAtRuntime(3)}read-writecurrent
iesMaintenanceDSLConfIgmpFilter
OBJECT-TYPE
The IGMP filter name.
1.3.6.1.4.1.6321.1.2.3.2.98.3.2.17OCTET STRING (SIZE(1..31))read-writecurrent
iesSysTimeSetup
OBJECT-IDENTITY
1.3.6.1.4.1.6321.1.2.3.2.98.3.3
iesTimeServerMode
OBJECT-TYPE
The mechanism of Time Server when the system boots up.
1.3.6.1.4.1.6321.1.2.3.2.98.3.3.1INTEGER {none(1), daytime(2), time(3), ntp(4)}read-writecurrent
iesTimeServerIP
OBJECT-TYPE
The IP Address of Time Server
1.3.6.1.4.1.6321.1.2.3.2.98.3.3.2IpAddressread-writecurrent
iesSystemTime
OBJECT-TYPE
The system time
1.3.6.1.4.1.6321.1.2.3.2.98.3.3.3DisplayStringread-writecurrent
iesSystemDate
OBJECT-TYPE
The system date
1.3.6.1.4.1.6321.1.2.3.2.98.3.3.4DisplayStringread-writecurrent
iesSystemTimeZone
OBJECT-TYPE
The system time zone
1.3.6.1.4.1.6321.1.2.3.2.98.3.3.5INTEGER {none(0), utc-1200(1), utc-1100(2), utc-1000(3), utc-0900(4), utc-0800(5), utc-0700(6), utc-0600(7), utc-0500(8), utc-0400(9), utc-0300(10), utc-0200(11), utc-0100(12), utc(13), utc0100(14), utc0200(15), utc0300(16), utc0400(17), utc0500(18), utc0600(19), utc0700(20), utc0800(21), utc0900(22), utc1000(23), utc1100(24), utc1200(25)}read-writecurrent
iesSysAccessControl
OBJECT-IDENTITY
1.3.6.1.4.1.6321.1.2.3.2.98.3.4
iesAccessCtrlTable
OBJECT-TYPE
A table that contains information about service access control.
1.3.6.1.4.1.6321.1.2.3.2.98.3.4.1not-accessiblecurrent
iesAccessCtrlEntry
OBJECT-TYPE
A list of access control entry.
1.3.6.1.4.1.6321.1.2.3.2.98.3.4.1.1not-accessiblecurrent
iesAccessCtrlService
OBJECT-TYPE
The service type of the access control entry.
1.3.6.1.4.1.6321.1.2.3.2.98.3.4.1.1.1INTEGER {telnet(1), ftp(2), web(3), icmp(4)}read-onlycurrent
iesAccessCtrlEnable
OBJECT-TYPE
Enable or disable the service.
1.3.6.1.4.1.6321.1.2.3.2.98.3.4.1.1.2INTEGER {enable(1), disable(2)}read-writecurrent
iesAccessCtrlPort
OBJECT-TYPE
The port number which the service uses.
1.3.6.1.4.1.6321.1.2.3.2.98.3.4.1.1.3INTEGERread-writecurrent
iesMaxNumOfSecuredClients
OBJECT-TYPE
The maximum number of sets of secured clients.
1.3.6.1.4.1.6321.1.2.3.2.98.3.4.2INTEGERread-onlycurrent
iesSecuredClientTable
OBJECT-TYPE
A table that contains information about secured clients.
1.3.6.1.4.1.6321.1.2.3.2.98.3.4.3not-accessiblecurrent
iesSecuredClientEntry
OBJECT-TYPE
A list of secured client entry.
1.3.6.1.4.1.6321.1.2.3.2.98.3.4.3.1not-accessiblecurrent
iesSecuredClientStartIp
OBJECT-TYPE
The starting IP address of a set of secured clients.
1.3.6.1.4.1.6321.1.2.3.2.98.3.4.3.1.1IpAddressread-onlycurrent
iesSecuredClientEndIp
OBJECT-TYPE
The ending IP address of a set of secured clients.
1.3.6.1.4.1.6321.1.2.3.2.98.3.4.3.1.2IpAddressread-onlycurrent
iesSecuredClientService
OBJECT-TYPE
Each bit corresponds to a service. The bit is set to 1 if the service is enabled, and set to 0 if the service is disabled. The various bit positions are: BIT 1: telnet BIT 2: FTP BIT 3: web BIT 4: ICMP
1.3.6.1.4.1.6321.1.2.3.2.98.3.4.3.1.3INTEGERread-createcurrent
iesSecuredClientRowStatus
OBJECT-TYPE
This object is used to create a new row or modify or delete an existing row in this table. A row is activated by setting this object to `active', and is deactivated by setting it to 'notInService'.
1.3.6.1.4.1.6321.1.2.3.2.98.3.4.3.1.4RowStatusread-createcurrent
iesSysStaticRoute
OBJECT-IDENTITY
1.3.6.1.4.1.6321.1.2.3.2.98.3.5
iesMaxNumOfStaticRoutes
OBJECT-TYPE
The maximum number of static routes.
1.3.6.1.4.1.6321.1.2.3.2.98.3.5.1INTEGERread-onlycurrent
iesStaticRouteTable
OBJECT-TYPE
A table that contains information about static routes.
1.3.6.1.4.1.6321.1.2.3.2.98.3.5.2not-accessiblecurrent
iesStaticRouteEntry
OBJECT-TYPE
A list of static route entry.
1.3.6.1.4.1.6321.1.2.3.2.98.3.5.2.1not-accessiblecurrent
iesStaticRouteName
OBJECT-TYPE
The name of the static route.
1.3.6.1.4.1.6321.1.2.3.2.98.3.5.2.1.1DisplayStringread-onlycurrent
iesStaticRouteDest
OBJECT-TYPE
The destination IP address of the static route.
1.3.6.1.4.1.6321.1.2.3.2.98.3.5.2.1.2IpAddressread-createcurrent
iesStaticRouteMask
OBJECT-TYPE
The subnet mask of the static route.
1.3.6.1.4.1.6321.1.2.3.2.98.3.5.2.1.3IpAddressread-createcurrent
iesStaticRouteGateway
OBJECT-TYPE
The gateway IP address of the static route.
1.3.6.1.4.1.6321.1.2.3.2.98.3.5.2.1.4IpAddressread-createcurrent
iesStaticRouteMetric
OBJECT-TYPE
The routing metric of the static route.
1.3.6.1.4.1.6321.1.2.3.2.98.3.5.2.1.5INTEGERread-createcurrent
iesStaticRouteRowStatus
OBJECT-TYPE
This object is used to create a new row or modify or delete an existing row in this table. A row is activated by setting this object to `active', and is deactivated by setting it to 'notInService'.
1.3.6.1.4.1.6321.1.2.3.2.98.3.5.2.1.6RowStatusread-createcurrent
iesSyslogSetup
OBJECT-IDENTITY
1.3.6.1.4.1.6321.1.2.3.2.98.3.6
iesSysLogEnable
OBJECT-TYPE
Enable/disable syslog function.
1.3.6.1.4.1.6321.1.2.3.2.98.3.6.1INTEGERread-writecurrent
iesSysLogServer
OBJECT-TYPE
IP address of the syslog server.
1.3.6.1.4.1.6321.1.2.3.2.98.3.6.2IpAddressread-writecurrent
iesSysLogFacility
OBJECT-TYPE
Log facility used by the syslog function.
1.3.6.1.4.1.6321.1.2.3.2.98.3.6.3INTEGER {local1(1), local2(2), local3(3), local4(4), local5(5), local6(6), local7(7)}read-writecurrent
iesSysDhcpSetup
OBJECT-IDENTITY
1.3.6.1.4.1.6321.1.2.3.2.98.3.7
iesDhcpRelayEnable
OBJECT-TYPE
Enable/disable DHCP relay function.
1.3.6.1.4.1.6321.1.2.3.2.98.3.7.1INTEGER {enable(1), disable(2)}read-writecurrent
iesDhcpRelayOption82Enable
OBJECT-TYPE
Enable/disable DHCP relay Option82 function.
1.3.6.1.4.1.6321.1.2.3.2.98.3.7.2INTEGER {enable(1), disable(2)}read-writecurrent
iesDhcpRelayOption82Info
OBJECT-TYPE
User specific Option82 information.
1.3.6.1.4.1.6321.1.2.3.2.98.3.7.3DisplayStringread-writecurrent
iesMaxNumOfDhcpServers
OBJECT-TYPE
The maximum number of DHCP servers.
1.3.6.1.4.1.6321.1.2.3.2.98.3.7.4INTEGERread-onlycurrent
iesDhcpServerTable
OBJECT-TYPE
A table that contains DHCP server information.
1.3.6.1.4.1.6321.1.2.3.2.98.3.7.5not-accessiblecurrent
iesDhcpServerEntry
OBJECT-TYPE
The entry of DHCP server table.
1.3.6.1.4.1.6321.1.2.3.2.98.3.7.5.1not-accessiblecurrent
iesDhcpServerIp
OBJECT-TYPE
The IP address of the DHCP server.
1.3.6.1.4.1.6321.1.2.3.2.98.3.7.5.1.1IpAddressread-onlycurrent
iesDhcpServerRowStatus
OBJECT-TYPE
The row status of the DHCP server entry.
1.3.6.1.4.1.6321.1.2.3.2.98.3.7.5.1.2RowStatusread-createcurrent
iesSysSNMPSetup
OBJECT-IDENTITY
1.3.6.1.4.1.6321.1.2.3.2.98.3.8
iesMaxNumberOfTrapDestinations
OBJECT-TYPE
The max number of the trap destinations.
1.3.6.1.4.1.6321.1.2.3.2.98.3.8.1INTEGERread-onlycurrent
iesSNMPTrapDestTable
OBJECT-TYPE
A table that contains SNMP trap destination information.
1.3.6.1.4.1.6321.1.2.3.2.98.3.8.2not-accessiblecurrent
iesSNMPTrapDestEntry
OBJECT-TYPE
The entry of SNMP trap destination table.
1.3.6.1.4.1.6321.1.2.3.2.98.3.8.2.1not-accessiblecurrent
iesTrapDestIp
OBJECT-TYPE
The IP address of the trap destination.
1.3.6.1.4.1.6321.1.2.3.2.98.3.8.2.1.1IpAddressread-onlycurrent
iesTrapDestPort
OBJECT-TYPE
The UDP port of the trap destination.
1.3.6.1.4.1.6321.1.2.3.2.98.3.8.2.1.2INTEGERread-onlycurrent
iesTrapDestRowStatus
OBJECT-TYPE
The row status of the trap destination entry.
1.3.6.1.4.1.6321.1.2.3.2.98.3.8.2.1.3RowStatusread-createcurrent
iesSnmpGetCommunity
OBJECT-TYPE
The SNMP get community.
1.3.6.1.4.1.6321.1.2.3.2.98.3.8.3DisplayStringread-writecurrent
iesSnmpSetCommunity
OBJECT-TYPE
The SNMP set community.
1.3.6.1.4.1.6321.1.2.3.2.98.3.8.4DisplayStringread-writecurrent
iesSnmpTrapCommunity
OBJECT-TYPE
The SNMP trap community.
1.3.6.1.4.1.6321.1.2.3.2.98.3.8.5DisplayStringread-writecurrent
iesSysDot1xSetup
OBJECT-IDENTITY
1.3.6.1.4.1.6321.1.2.3.2.98.3.9
iesMaxNumberOfRadiusServers
OBJECT-TYPE
The max number of the RADIUS Servers.
1.3.6.1.4.1.6321.1.2.3.2.98.3.9.1INTEGERread-onlycurrent
iesRadiusServerTable
OBJECT-TYPE
A table that contains Radius Server information.
1.3.6.1.4.1.6321.1.2.3.2.98.3.9.2not-accessiblecurrent
iesRadiusServerEntry
OBJECT-TYPE
The entry of Radius Server table.
1.3.6.1.4.1.6321.1.2.3.2.98.3.9.2.1not-accessiblecurrent
iesRadiusServerIndex
OBJECT-TYPE
The identity of the RADIUS server.
1.3.6.1.4.1.6321.1.2.3.2.98.3.9.2.1.1INTEGERread-onlycurrent
iesRadiusServerIp
OBJECT-TYPE
The IP address of the Radius Server.
1.3.6.1.4.1.6321.1.2.3.2.98.3.9.2.1.2IpAddressread-createcurrent
iesRadiusServerPort
OBJECT-TYPE
The UDP port of the Radius Server.
1.3.6.1.4.1.6321.1.2.3.2.98.3.9.2.1.3INTEGERread-createcurrent
iesRadiusSharedSecret
OBJECT-TYPE
The shared secret of the Radius Server.
1.3.6.1.4.1.6321.1.2.3.2.98.3.9.2.1.4DisplayStringread-createcurrent
iesRadiusServerRowStatus
OBJECT-TYPE
The row status of the Radius Server entry.
1.3.6.1.4.1.6321.1.2.3.2.98.3.9.2.1.5RowStatusread-createcurrent
iesDot1xEnable
OBJECT-TYPE
Enable/disable the 802.1x function.
1.3.6.1.4.1.6321.1.2.3.2.98.3.9.3INTEGER {enable(1), disable(2)}read-writecurrent
iesDot1xPortTable
OBJECT-TYPE
This table includes the configuration of 802.1x.
1.3.6.1.4.1.6321.1.2.3.2.98.3.9.4not-accessiblecurrent
iesDot1xPortEntry
OBJECT-TYPE
An entry in iesDot1xPortTable.
1.3.6.1.4.1.6321.1.2.3.2.98.3.9.4.1not-accessiblecurrent
iesDot1xPortEnable
OBJECT-TYPE
The option defines if the port enables 802.1x settings.
1.3.6.1.4.1.6321.1.2.3.2.98.3.9.4.1.1INTEGER {enable(1), disable(2)}read-writecurrent
iesDot1xPortControl
OBJECT-TYPE
The configuration defines the 802.1x port control type.
1.3.6.1.4.1.6321.1.2.3.2.98.3.9.4.1.2INTEGER {auto(1), forceAuth(2), forceUnAuth(3)}read-writecurrent
iesDot1xPortReAuthEnable
OBJECT-TYPE
The option defines if the port enables 802.1x re-authentication.
1.3.6.1.4.1.6321.1.2.3.2.98.3.9.4.1.3INTEGER {on(1), off(2)}read-writecurrent
iesDot1xPortReAuthPeriod
OBJECT-TYPE
The configuration defines the 802.1x re-authentication period (seconds) for each port.
1.3.6.1.4.1.6321.1.2.3.2.98.3.9.4.1.4INTEGERread-writecurrent
iesSysMacFilter
OBJECT-IDENTITY
1.3.6.1.4.1.6321.1.2.3.2.98.3.10
iesMacFilterStatusTable
OBJECT-TYPE
This table includes the status of mac filtering for each port.
1.3.6.1.4.1.6321.1.2.3.2.98.3.10.1not-accessiblecurrent
iesMacFilterStatusEntry
OBJECT-TYPE
An entry in iesMacFilterStatusTable.
1.3.6.1.4.1.6321.1.2.3.2.98.3.10.1.1not-accessiblecurrent
iesMacFilterStatusEnable
OBJECT-TYPE
The option defines if the port enables mac filtering.
1.3.6.1.4.1.6321.1.2.3.2.98.3.10.1.1.1INTEGER {enableAccept(1), disable(2), enableDeny(3)}read-writecurrent
iesMaxNumberOfMacFilters
OBJECT-TYPE
The max number of the mac filters in the system.
1.3.6.1.4.1.6321.1.2.3.2.98.3.10.2INTEGERread-onlycurrent
iesMaxNumberOfMacFiltersPerPort
OBJECT-TYPE
The max number of the mac filters for each port.
1.3.6.1.4.1.6321.1.2.3.2.98.3.10.3INTEGERread-onlycurrent
iesCurrNumberOfMacFilters
OBJECT-TYPE
The current number of the mac filters in the system.
1.3.6.1.4.1.6321.1.2.3.2.98.3.10.4INTEGERread-onlycurrent
iesMacFilterTable
OBJECT-TYPE
A table that contains the mac filtering information.
1.3.6.1.4.1.6321.1.2.3.2.98.3.10.5not-accessiblecurrent
iesMacFilterEntry
OBJECT-TYPE
The entry of iesMacFilterTable.
1.3.6.1.4.1.6321.1.2.3.2.98.3.10.5.1not-accessiblecurrent
iesMacFilterMacAddr
OBJECT-TYPE
The mac address which can pass through the port.
1.3.6.1.4.1.6321.1.2.3.2.98.3.10.5.1.1PhysAddressread-onlycurrent
iesMacFilterRowStatus
OBJECT-TYPE
The row status of the entry.
1.3.6.1.4.1.6321.1.2.3.2.98.3.10.5.1.2RowStatusread-createcurrent
iesSysPacketFilter
OBJECT-IDENTITY
1.3.6.1.4.1.6321.1.2.3.2.98.3.11
iesPacketFilterTable
OBJECT-TYPE
This table includes packet filtering for each port.
1.3.6.1.4.1.6321.1.2.3.2.98.3.11.1not-accessiblecurrent
iesPacketFilterEntry
OBJECT-TYPE
An entry in iesPacketFilterTable.
1.3.6.1.4.1.6321.1.2.3.2.98.3.11.1.1not-accessiblecurrent
iesPacketFilter
OBJECT-TYPE
The packet filter. The semantic for each bit is: Bit 1: accept all Bit 2: accept PPPoE only Bit 3: reject ARP Bit 4: reject DHCP Bit 5: reject EAPOL Bit 6: reject PPPoE Bit 7: reject NetBIOS Bit 8: reject IGMP Bit 9: reject IP
1.3.6.1.4.1.6321.1.2.3.2.98.3.11.1.1.1INTEGERread-writecurrent
iesSysMacCountFilter
OBJECT-IDENTITY
1.3.6.1.4.1.6321.1.2.3.2.98.3.12
iesMacCountFilterTable
OBJECT-TYPE
This table includes mac count filtering for each port.
1.3.6.1.4.1.6321.1.2.3.2.98.3.12.1not-accessiblecurrent
iesMacCountFilterEntry
OBJECT-TYPE
An entry in iesMacCountFilterTable.
1.3.6.1.4.1.6321.1.2.3.2.98.3.12.1.1not-accessiblecurrent
iesMacCountFilterStatus
OBJECT-TYPE
The option defines if the port enables mac count filtering.
1.3.6.1.4.1.6321.1.2.3.2.98.3.12.1.1.1INTEGER {enable(1), disable(2)}read-writecurrent
iesMacCountFilterCount
OBJECT-TYPE
The number of mac addresses which can pass through the port.
1.3.6.1.4.1.6321.1.2.3.2.98.3.12.1.1.2INTEGERread-writecurrent
iesSysMulticastGroup
OBJECT-IDENTITY
1.3.6.1.4.1.6321.1.2.3.2.98.3.13
iesMaxNumberOfMulticastGroups
OBJECT-TYPE
The max number of static multicast groups in the system.
1.3.6.1.4.1.6321.1.2.3.2.98.3.13.1INTEGERread-onlycurrent
iesMulticastGroupTable
OBJECT-TYPE
A table that contains static multicast group information.
1.3.6.1.4.1.6321.1.2.3.2.98.3.13.2not-accessiblecurrent
iesMulticastGroupEntry
OBJECT-TYPE
The entry of multicast group table.
1.3.6.1.4.1.6321.1.2.3.2.98.3.13.2.1not-accessiblecurrent
iesMulticastGroupMacAddr
OBJECT-TYPE
The multicast MAC address of the group.
1.3.6.1.4.1.6321.1.2.3.2.98.3.13.2.1.1PhysAddressread-onlycurrent
iesMulticastGroupPorts
OBJECT-TYPE
The port list which specifies the ports joining the multicast group.
1.3.6.1.4.1.6321.1.2.3.2.98.3.13.2.1.2PortListread-createcurrent
iesMulticastGroupRowStatus
OBJECT-TYPE
The row status of the multicast group entry.
1.3.6.1.4.1.6321.1.2.3.2.98.3.13.2.1.3RowStatusread-createcurrent
iesSysIgmpFilter
OBJECT-IDENTITY
1.3.6.1.4.1.6321.1.2.3.2.98.3.14
iesMaxNumberOfIgmpFilters
OBJECT-TYPE
The max number of IGMP filters in the system.
1.3.6.1.4.1.6321.1.2.3.2.98.3.14.1INTEGERread-onlycurrent
iesIgmpFilterTable
OBJECT-TYPE
A table that contains IGMP filters.
1.3.6.1.4.1.6321.1.2.3.2.98.3.14.2not-accessiblecurrent
iesIgmpFilterEntry
OBJECT-TYPE
The entry of IGMP filter table.
1.3.6.1.4.1.6321.1.2.3.2.98.3.14.2.1not-accessiblecurrent
iesIgmpFilterName
OBJECT-TYPE
The IGMP filter name.
1.3.6.1.4.1.6321.1.2.3.2.98.3.14.2.1.1OCTET STRING (SIZE(1..31))read-onlycurrent
iesIgmpFilterIndex
OBJECT-TYPE
The index which specifies the filter rule.
1.3.6.1.4.1.6321.1.2.3.2.98.3.14.2.1.2INTEGERread-onlycurrent
iesIgmpFilterStartIp
OBJECT-TYPE
The start IP of the filter rule.
1.3.6.1.4.1.6321.1.2.3.2.98.3.14.2.1.3IpAddressread-createcurrent
iesIgmpFilterEndIp
OBJECT-TYPE
The end IP of the filter rule.
1.3.6.1.4.1.6321.1.2.3.2.98.3.14.2.1.4IpAddressread-createcurrent
iesIgmpFilterRowStatus
OBJECT-TYPE
The row status of the IGMP filter entry.
1.3.6.1.4.1.6321.1.2.3.2.98.3.14.2.1.5RowStatusread-createcurrent
iesIgmpFilterPortTable
OBJECT-TYPE
This table specifies the IGMP filter of the port.
1.3.6.1.4.1.6321.1.2.3.2.98.3.14.3not-accessiblecurrent
iesIgmpFilterPortEntry
OBJECT-TYPE
An entry in iesIgmpFilterPortTable.
1.3.6.1.4.1.6321.1.2.3.2.98.3.14.3.1not-accessiblecurrent
iesIgmpFilterPortFilter
OBJECT-TYPE
The IGMP filter of the port.
1.3.6.1.4.1.6321.1.2.3.2.98.3.14.3.1.1OCTET STRING (SIZE(1..31))read-writecurrent
iesL2SW
OBJECT-IDENTITY
1.3.6.1.4.1.6321.1.2.3.2.98.4
iesIGMPSnoopingEnabled
OBJECT-TYPE
A flag indicating whether IGMP snooping function is enabled or not.
1.3.6.1.4.1.6321.1.2.3.2.98.4.1INTEGER {true(1), false(2)}read-writecurrent
iesManagementVLANId
OBJECT-TYPE
The VLAN ID for management.
1.3.6.1.4.1.6321.1.2.3.2.98.4.2INTEGERread-writecurrent
iesMaxNumOfStaticVlans
OBJECT-TYPE
The maximum number of static VLANs supported by the system.
1.3.6.1.4.1.6321.1.2.3.2.98.4.3INTEGERread-onlycurrent
iesMaxNumOfTrunkGroups
OBJECT-TYPE
The maximum number of trunk groups.
1.3.6.1.4.1.6321.1.2.3.2.98.4.4INTEGERread-onlycurrent
iesTrunkGroupTable
OBJECT-TYPE
A table that contains trunk group configuration.
1.3.6.1.4.1.6321.1.2.3.2.98.4.5not-accessiblecurrent
iesTrunkGroupEntry
OBJECT-TYPE
The entry of trunk group table
1.3.6.1.4.1.6321.1.2.3.2.98.4.5.1not-accessiblecurrent
iesTrunkGroupId
OBJECT-TYPE
The ID of the trunk group
1.3.6.1.4.1.6321.1.2.3.2.98.4.5.1.1INTEGERread-onlycurrent
iesTrunkGroupName
OBJECT-TYPE
The name of the trunk group
1.3.6.1.4.1.6321.1.2.3.2.98.4.5.1.2DisplayStringread-createcurrent
iesTrunkGroupPorts
OBJECT-TYPE
The port list of the trunk group
1.3.6.1.4.1.6321.1.2.3.2.98.4.5.1.3PortListread-createcurrent
iesTrunkGroupRowStatus
OBJECT-TYPE
The row status of the trunk group entry
1.3.6.1.4.1.6321.1.2.3.2.98.4.5.1.4RowStatusread-createcurrent
iesPortIsolationEnable
OBJECT-TYPE
A flag indicating whether VLAN port isolation function is enabled or not.
1.3.6.1.4.1.6321.1.2.3.2.98.4.6INTEGER {enable(1), disable(2)}read-writecurrent
iesRSTPEnable
OBJECT-TYPE
Enable/Disable RSTP.
1.3.6.1.4.1.6321.1.2.3.2.98.4.7INTEGER {enable(1), disable(2)}read-writecurrent
iesSwitchMode
OBJECT-TYPE
Switch DSLAM's operatrion Mode.
1.3.6.1.4.1.6321.1.2.3.2.98.4.8INTEGER {daisyChain(1), standalone(2)}read-writecurrent

Notifications

NameOIDStatus
reboot
NOTIFICATION-TYPE
Send a message to the manager that the system is going to reboot. The variable is the reason why the system reboots.
1.3.6.1.4.1.6321.1.2.3.2.0.1
systemShutdown
NOTIFICATION-TYPE
Send a message to the manager that the system is going to shutdown. The variable is the reason that causes the system to shutdown.
1.3.6.1.4.1.6321.1.2.3.2.0.2
overheat
NOTIFICATION-TYPE
Send a message to the manager that the system is overheated. The variable in the binding list is the current temperature in Celsius of the system.
1.3.6.1.4.1.6321.1.2.3.2.0.3
overheatOver
NOTIFICATION-TYPE
Send a message to the manager that the overheated condition is over. The variable in the binding list is the current temperature in Celsius of the system.
1.3.6.1.4.1.6321.1.2.3.2.0.4
errLog
NOTIFICATION-TYPE
Send a message to the manager that an error log is created in system. The variable in the binding list is the content of the error log.
1.3.6.1.4.1.6321.1.2.3.2.0.5
fanRpmLow
NOTIFICATION-TYPE
Send a message to the manager that the rpm of the fan is too low. The variable in the binding list is the current rpm of the fan.
1.3.6.1.4.1.6321.1.2.3.2.0.6
fanRpmNormal
NOTIFICATION-TYPE
Send a message to the manager that the low-rpm condition of the fan is over. The variable in the binding list is the current rpm of the fan.
1.3.6.1.4.1.6321.1.2.3.2.0.7
voltageOutOfRange
NOTIFICATION-TYPE
Send a message to the manager that the voltage of the system is out of range. The variable in the binding list is the current voltage in volt of the system.
1.3.6.1.4.1.6321.1.2.3.2.0.8
voltageNormal
NOTIFICATION-TYPE
Send a message to the manager that the low-voltage condition is over. The variable in the binding list is the current voltage in volt of the system.
1.3.6.1.4.1.6321.1.2.3.2.0.9
systemMaintenanceFailure
NOTIFICATION-TYPE
Send a message to the manager that the system maintence operation fail. The variable in the variable binding indicates the problem.
1.3.6.1.4.1.6321.1.2.3.2.0.10
configChange
NOTIFICATION-TYPE
This notification indicates that the configuration data of one module is changed.
1.3.6.1.4.1.6321.1.2.3.2.0.11
moduleUp
NOTIFICATION-TYPE
A moduleUp trap signifies that the sending protocol entity recognizes that one of the modules represented in the agent's configuration has come up.
1.3.6.1.4.1.6321.1.2.3.2.0.12
moduleDown
NOTIFICATION-TYPE
A moduleDown trap signifies that the sending protocol entity recognizes a failure in one of the modules represented in the agent's configuration.
1.3.6.1.4.1.6321.1.2.3.2.0.13
modulePlugIn
NOTIFICATION-TYPE
A modulePlugIn trap signifies that the sending protocol entity recognizes that one module is plugged into the device.
1.3.6.1.4.1.6321.1.2.3.2.0.14
modulePullOut
NOTIFICATION-TYPE
A modulePullOut trap signifies that the sending protocol entity recognizes one module is pulled out from the device.
1.3.6.1.4.1.6321.1.2.3.2.0.15
powerDC48VAFailure
NOTIFICATION-TYPE
The trap signifies that the power supply of DC 48V at the right side of main Chassis (front view) failed.
1.3.6.1.4.1.6321.1.2.3.2.0.16
powerDC48VANormal
NOTIFICATION-TYPE
The trap signifies that the power supply of DC 48V at the right side of main Chassis (front view) is in normal state.
1.3.6.1.4.1.6321.1.2.3.2.0.17
powerDC48VBFailure
NOTIFICATION-TYPE
The trap signifies that the power supply of DC 48V at the left side of main Chassis (front view) failed.
1.3.6.1.4.1.6321.1.2.3.2.0.18
powerDC48VBNormal
NOTIFICATION-TYPE
The trap signifies that the power supply of DC 48V at the left side of main Chassis (front view) is in normal state.
1.3.6.1.4.1.6321.1.2.3.2.0.19
extAlarmInputTrigger
NOTIFICATION-TYPE
The trap signifies that the external alarm input of MSC card is triggered.
1.3.6.1.4.1.6321.1.2.3.2.0.20
extAlarmInputRelease
NOTIFICATION-TYPE
The trap signifies that the external alarm input of MSC card is released.
1.3.6.1.4.1.6321.1.2.3.2.0.21
thermalSensorFailure
NOTIFICATION-TYPE
The trap signifies that the thermal sensor failed.
1.3.6.1.4.1.6321.1.2.3.2.0.22
mscSwitchOverOK
NOTIFICATION-TYPE
The trap signifies that MSC card is switched over successfully. The value of iesSlotId is the slot ID of the current working MSC.
1.3.6.1.4.1.6321.1.2.3.2.0.23
networkTopologyChange
NOTIFICATION-TYPE
The trap signifies the network topology is changed.
1.3.6.1.4.1.6321.1.2.3.2.0.24
adslAtucLof
NOTIFICATION-TYPE
The trap signifies ATU-C Loss of Framing.
1.3.6.1.4.1.6321.1.2.3.2.0.25
adslAturLof
NOTIFICATION-TYPE
The trap signifies ATU-R Loss of Framing.
1.3.6.1.4.1.6321.1.2.3.2.0.26
adslAtucLos
NOTIFICATION-TYPE
The trap signifies ATU-C Loss of Signal.
1.3.6.1.4.1.6321.1.2.3.2.0.27
adslAturLos
NOTIFICATION-TYPE
The trap signifies ATU-R Loss of Signal.
1.3.6.1.4.1.6321.1.2.3.2.0.28
adslAturLpr
NOTIFICATION-TYPE
The trap signifies ATU-R Loss of Power.
1.3.6.1.4.1.6321.1.2.3.2.0.29
adslAtucLofClear
NOTIFICATION-TYPE
The trap signifies ATU-C Loss of Framing is cleared.
1.3.6.1.4.1.6321.1.2.3.2.0.30
adslAturLofClear
NOTIFICATION-TYPE
The trap signifies ATU-R Loss of Framing is cleared.
1.3.6.1.4.1.6321.1.2.3.2.0.31
adslAtucLosClear
NOTIFICATION-TYPE
The trap signifies ATU-C Loss of Signal is cleared.
1.3.6.1.4.1.6321.1.2.3.2.0.32
adslAturLosClear
NOTIFICATION-TYPE
The trap signifies ATU-R Loss of Signal is cleared.
1.3.6.1.4.1.6321.1.2.3.2.0.33
adslAturLprClear
NOTIFICATION-TYPE
The trap signifies ATU-R Loss of Power is cleared.
1.3.6.1.4.1.6321.1.2.3.2.0.34