Dell-vlan-MIB
- Registered at
- 1.3.6.1.4.1.89.48
- Last updated
- 2006-02-12 00:00
- Organization
- Dell
- Revisions
- 2006-02-12 00:00, 2004-04-19 00:00
- Namespace
- dell
- Source file
Dell-vlan-MIB- Digest
sha256:d51cf5b242545b18524f4c42cc2bcce2ada91cef2f33d4223b920dbd9b8b540a
Description
The private MIB module definition for IP Multicast support in Dell devices.
Contact
www.dell.com
Imports
| From | Symbols |
|---|---|
| BRIDGE-MIB | dot1dBasePort |
| Dell-BRIDGEMIBOBJECTS-MIB | VlanList1, VlanList2, VlanList3, VlanList4 |
| Dell-MIB | rnd |
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddressType |
| Q-BRIDGE-MIB | PortList, VlanIndex, dot1qVlanIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
1 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BRIDGE-MIB Dell-BRIDGEMIBOBJECTS-MIB Dell-MIB Dell-vlan-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB P-BRIDGE-MIB Q-BRIDGE-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB
Under this module's arcs
Where the registration tree carries on below this module.
| Arc | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.89.48.54 | vlanVoice | Dell-vlanVoice-MIB |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| vlanMibVersion OBJECT-TYPE MIB's version : Version 2: the current VLAN MIB replaced the previous one; Version 3: field vlanPortForbiddenEgressPort was added. Version 4: dot1q and dot1v supported Version 5: Private Edge Vlan vlanPrivateEdgeSupported vlanPrivateEdgeMibVersion vlanPrivateEdgeTable | 1.3.6.1.4.1.89.48.1 | INTEGER | read-only | current |
| vlanMaxTableNumber OBJECT-TYPE Maximum number of VLAN Tables supported by the device. | 1.3.6.1.4.1.89.48.2 | INTEGER | read-only | current |
| vlanNameTable OBJECT-TYPE This table translates Vlan name to Vlan's tag and ifindex | 1.3.6.1.4.1.89.48.21 | not-accessible | current | |
| vlanNameEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.89.48.21.1 | not-accessible | current | |
| vlanNameName OBJECT-TYPE The Vlan's name | 1.3.6.1.4.1.89.48.21.1.1 | DisplayString (SIZE(1..32)) | read-only | current |
| vlanNameTag OBJECT-TYPE The Vlan's tag | 1.3.6.1.4.1.89.48.21.1.2 | INTEGER | read-only | current |
| vlanNameIfIndex OBJECT-TYPE The Vlan's ifindex | 1.3.6.1.4.1.89.48.21.1.3 | INTEGER | read-only | current |
| vlanPortModeTable OBJECT-TYPE This table hold information on port status trunk or access | 1.3.6.1.4.1.89.48.22 | not-accessible | current | |
| vlanPortModeEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.89.48.22.1 | not-accessible | current | |
| vlanPortModeState OBJECT-TYPE The port state, 1 is generic cli | 1.3.6.1.4.1.89.48.22.1.1 | INTEGER | read-write | current |
| vlanSendUnknownToAllPorts OBJECT-TYPE If a value of the parameter is true a frame with unknown destination MAC address sent by the Layer 3 to a VLAN will be sent to all ports of the VLAN. If a value of the parameter is false a frame with unknown destination MAC address sent by the Layer 3 to a VLAN will be discarded. | 1.3.6.1.4.1.89.48.27 | TruthValue | read-write | current |
| vlanDefaultSupported OBJECT-TYPE supported or not default vlan. | 1.3.6.1.4.1.89.48.29 | TruthValue | read-only | current |
| vlanDot1vSupported OBJECT-TYPE 802.1v standard for vlan per port and protocol. | 1.3.6.1.4.1.89.48.31 | TruthValue | read-only | current |
| vlanDefaultEnabled OBJECT-TYPE if supported default vlan , indicate enabled or disabled | 1.3.6.1.4.1.89.48.32 | TruthValue | read-write | current |
| vlanSpecialTagTable OBJECT-TYPE special vlan tag used for this port | 1.3.6.1.4.1.89.48.33 | not-accessible | current | |
| vlanSpecialTagEntry OBJECT-TYPE entry of special tag | 1.3.6.1.4.1.89.48.33.1 | not-accessible | current | |
| vlanSpecialTagVID OBJECT-TYPE specify the special vlan tag . | 1.3.6.1.4.1.89.48.33.1.1 | VlanIndex | read-write | current |
| vlanSpecialTagStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.89.48.33.1.2 | RowStatus | read-write | current |
| vlanSpecialTagCurrentTable OBJECT-TYPE special Current vlan tag used for this port | 1.3.6.1.4.1.89.48.34 | not-accessible | current | |
| vlanSpecialTagCurrentEntry OBJECT-TYPE entry of Current special tag | 1.3.6.1.4.1.89.48.34.1 | not-accessible | current | |
| vlanSpecialTagCurrentVID OBJECT-TYPE specify the special vlan tag . | 1.3.6.1.4.1.89.48.34.1.1 | VlanIndex | read-only | current |
| vlanSpecialTagCurrentReserved OBJECT-TYPE specify if the special vlan tag is reserved . | 1.3.6.1.4.1.89.48.34.1.2 | TruthValue | read-only | current |
| vlanSpecialTagCurrentActive OBJECT-TYPE specify if the special vlan tag is used . | 1.3.6.1.4.1.89.48.34.1.3 | TruthValue | read-only | current |
| vlanPrivateEdgeSupported OBJECT-TYPE is private edge supported. | 1.3.6.1.4.1.89.48.35 | TruthValue | read-only | current |
| vlanPrivateEdgeVersion OBJECT-TYPE private edge version. | 1.3.6.1.4.1.89.48.36 | INTEGER | read-only | current |
| vlanPrivateEdgeTable OBJECT-TYPE table for pve port and uplink | 1.3.6.1.4.1.89.48.37 | not-accessible | current | |
| vlanPrivateEdgeEntry OBJECT-TYPE entry of pve | 1.3.6.1.4.1.89.48.37.1 | not-accessible | current | |
| vlanPrivateEdgeUplink OBJECT-TYPE specify the uplink port. | 1.3.6.1.4.1.89.48.37.1.1 | INTEGER (1..65535) | read-write | current |
| vlanPrivateEdgeStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.89.48.37.1.2 | RowStatus | read-write | current |
| vlanDynamicVlanSupported OBJECT-TYPE is DynamicVlanVlan supported. | 1.3.6.1.4.1.89.48.38 | TruthValue | read-only | current |
| vlanDynamicVlanTable OBJECT-TYPE table for DynamicVlan | 1.3.6.1.4.1.89.48.39 | not-accessible | current | |
| vlanDynamicVlanEntry OBJECT-TYPE entry of DynamicVlan | 1.3.6.1.4.1.89.48.39.1 | not-accessible | current | |
| vlanDynamicVlanMacAddress OBJECT-TYPE mac address | 1.3.6.1.4.1.89.48.39.1.1 | MacAddress | not-accessible | current |
| vlanDynamicVlanTag OBJECT-TYPE vlan Tag | 1.3.6.1.4.1.89.48.39.1.2 | VlanIndex | read-write | current |
| vlanDynamicVlanStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.89.48.39.1.3 | RowStatus | read-write | current |
| vlanPortModeExtTable OBJECT-TYPE This table hold information on port status trunk or access | 1.3.6.1.4.1.89.48.40 | not-accessible | current | |
| vlanPortModeExtEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.89.48.40.1 | not-accessible | current | |
| vlanPortModeExtState OBJECT-TYPE The ext | 1.3.6.1.4.1.89.48.40.1.1 | INTEGER | read-write | current |
| vlanPortModeExtStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.89.48.40.1.2 | RowStatus | read-write | current |
| vlanPrivateSupported OBJECT-TYPE is private vlan supported. | 1.3.6.1.4.1.89.48.41 | TruthValue | read-only | current |
| vlanPrivateTableOld OBJECT-TYPE table for PrivateVlan | 1.3.6.1.4.1.89.48.42 | not-accessible | current | |
| vlanPrivateEntryOld OBJECT-TYPE entry of PrivateVlan | 1.3.6.1.4.1.89.48.42.1 | not-accessible | current | |
| vlanPrivateOldIsolatedVlanTag OBJECT-TYPE vlan Tag | 1.3.6.1.4.1.89.48.42.1.1 | INTEGER (0..4094) | read-write | current |
| vlanPrivateOldStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.89.48.42.1.2 | RowStatus | read-write | current |
| vlanPrivateCommunityTable OBJECT-TYPE table for PrivateVlan | 1.3.6.1.4.1.89.48.43 | not-accessible | current | |
| vlanPrivateCommunityEntry OBJECT-TYPE entry of PrivateVlan | 1.3.6.1.4.1.89.48.43.1 | not-accessible | current | |
| vlanPrivateCommunityVlanTag OBJECT-TYPE vlan Tag | 1.3.6.1.4.1.89.48.43.1.1 | VlanIndex | not-accessible | current |
| vlanPrivateCommunityStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.89.48.43.1.2 | RowStatus | read-write | current |
| vlanMulticastTvTable OBJECT-TYPE multicast vlan used for this port | 1.3.6.1.4.1.89.48.44 | not-accessible | current | |
| vlanMulticastTvEntry OBJECT-TYPE entry of multicast tag | 1.3.6.1.4.1.89.48.44.1 | not-accessible | current | |
| vlanMulticastTvVID OBJECT-TYPE specify the TV vlan tag, vlan must exist . | 1.3.6.1.4.1.89.48.44.1.1 | VlanIndex | read-write | current |
| vlanMulticastTvStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.89.48.44.1.2 | RowStatus | read-write | current |
| vlanMacBaseVlanGroupTable OBJECT-TYPE A table that contains mappings from Range of MAC addresses to Group Identifiers used for MAC-based VLAN Classification. | 1.3.6.1.4.1.89.48.45 | not-accessible | current | |
| vlanMacBaseVlanGroupEntry OBJECT-TYPE A mapping from a Range of MAC addresses to a Group Identifier. | 1.3.6.1.4.1.89.48.45.1 | not-accessible | current | |
| vlanMacBaseVlanMacAddress OBJECT-TYPE The base MAC address of the range. | 1.3.6.1.4.1.89.48.45.1.1 | MacAddress | not-accessible | current |
| vlanMacBaseVlanMacMask OBJECT-TYPE The Mask of the range. The mask determains the leading '1' bits of the mask (MSB). 48 means single HOST and 9 means the widest range. The MASK is limited to 9 to avoid entring ranges including multicast addresses. | 1.3.6.1.4.1.89.48.45.1.2 | INTEGER (9..48) | not-accessible | current |
| vlanMacBaseVlanGroupId OBJECT-TYPE Represents a group of ranges of MAC addresses that are associated together when assigning a VID to a frame. | 1.3.6.1.4.1.89.48.45.1.3 | INTEGER (0..2147483647) | read-create | current |
| vlanMacBaseVlanGroupRowStatus OBJECT-TYPE This object indicates the status of this entry. | 1.3.6.1.4.1.89.48.45.1.4 | RowStatus | read-create | current |
| vlanMacBaseVlanPortTable OBJECT-TYPE A table that contains VID sets used for MAC-based VLAN Classification. | 1.3.6.1.4.1.89.48.46 | not-accessible | current | |
| vlanMacBaseVlanPortEntry OBJECT-TYPE A VID set for a port and group. | 1.3.6.1.4.1.89.48.46.1 | not-accessible | current | |
| vlanMacBaseVlanPortGroupId OBJECT-TYPE Designates a group of Ranges in the ranges Group Database. | 1.3.6.1.4.1.89.48.46.1.1 | INTEGER (1..2147483647) | not-accessible | current |
| vlanMacBaseVlanPortGroupVid OBJECT-TYPE The VID associated with a group of range MAC addresses for each port. | 1.3.6.1.4.1.89.48.46.1.2 | VlanIndex | read-create | current |
| vlanMacBaseVlanPortRowStatus OBJECT-TYPE This object indicates the status of this entry. | 1.3.6.1.4.1.89.48.46.1.3 | RowStatus | read-create | current |
| vlanPrivateEdgeGroupTable OBJECT-TYPE table for pve port and uplink | 1.3.6.1.4.1.89.48.47 | not-accessible | current | |
| vlanPrivateEdgeGroupEntry OBJECT-TYPE entry of pve | 1.3.6.1.4.1.89.48.47.1 | not-accessible | current | |
| vlanPrivateEdgeGroupSource OBJECT-TYPE specify the uplink group. | 1.3.6.1.4.1.89.48.47.1.1 | INTEGER (1..65535) | read-only | current |
| vlanPrivateEdgeGroupUplink OBJECT-TYPE specify the uplink port. | 1.3.6.1.4.1.89.48.47.1.2 | INTEGER (1..65535) | read-write | current |
| vlanPrivateEdgeGroupStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.89.48.47.1.3 | RowStatus | read-write | current |
| vlanPrivateEdgeGroupIfIndexTable OBJECT-TYPE table for pve port and uplink | 1.3.6.1.4.1.89.48.48 | not-accessible | current | |
| vlanPrivateEdgeGroupIfIndexEntry OBJECT-TYPE entry of pve | 1.3.6.1.4.1.89.48.48.1 | not-accessible | current | |
| vlanPrivateEdgeGroupIfIndexID OBJECT-TYPE specify the ifIndex group id. | 1.3.6.1.4.1.89.48.48.1.1 | INTEGER (1..65535) | read-only | current |
| vlanPrivateEdgeGroupIfIndexDomainID OBJECT-TYPE specify the ifIndex group id. | 1.3.6.1.4.1.89.48.48.1.2 | INTEGER (1..65535) | read-only | current |
| vlanSubnetRangeTable OBJECT-TYPE A table that contains mappings from subnet range to Group Identifiers used for Port-and-subnet-based VLAN Classification. | 1.3.6.1.4.1.89.48.49 | not-accessible | current | |
| vlanSubnetRangeEntry OBJECT-TYPE A mapping from a subnet to a Group Identifier. | 1.3.6.1.4.1.89.48.49.1 | not-accessible | current | |
| vlanSubnetRangeAddr OBJECT-TYPE The IP address of the range | 1.3.6.1.4.1.89.48.49.1.1 | IpAddress | read-only | current |
| vlanSubnetRangeMask OBJECT-TYPE The numbers of continuous ones in the mask | 1.3.6.1.4.1.89.48.49.1.2 | INTEGER (1..32) | read-only | current |
| vlanSubnetRangeGroupId OBJECT-TYPE Represents a group of subnets that are associated together when assigning a VID to a frame. | 1.3.6.1.4.1.89.48.49.1.3 | INTEGER (0..2147483647) | read-create | current |
| vlanSubnetRangeRowStatus OBJECT-TYPE This object indicates the status of this entry. | 1.3.6.1.4.1.89.48.49.1.4 | RowStatus | read-create | current |
| vlanSubnetPortTable OBJECT-TYPE A table that contains VID sets used for Port-and-subnet-based VLAN Classification. | 1.3.6.1.4.1.89.48.50 | not-accessible | current | |
| vlanSubnetPortEntry OBJECT-TYPE A VID set for a port. | 1.3.6.1.4.1.89.48.50.1 | not-accessible | current | |
| vlanSubnetPortGroupId OBJECT-TYPE Designates a group of subnets in the Group Database. | 1.3.6.1.4.1.89.48.50.1.1 | INTEGER (1..2147483647) | not-accessible | current |
| vlanSubnetPortGroupVid OBJECT-TYPE The VID associated with a group of subnets for each port. | 1.3.6.1.4.1.89.48.50.1.2 | INTEGER (1..4094) | read-create | current |
| vlanSubnetPortRowStatus OBJECT-TYPE This object indicates the status of this entry. | 1.3.6.1.4.1.89.48.50.1.3 | RowStatus | read-create | current |
| vlanTriplePlayTable OBJECT-TYPE TriplePlay table, map CPE vlan to multicastTvVlan | 1.3.6.1.4.1.89.48.51 | not-accessible | current | |
| vlanTriplePlayEntry OBJECT-TYPE entry of TriplePlay table | 1.3.6.1.4.1.89.48.51.1 | not-accessible | current | |
| vlanTriplePlayInnerVID OBJECT-TYPE Specifies the CPE inner vlan. | 1.3.6.1.4.1.89.48.51.1.1 | VlanIndex | not-accessible | current |
| vlanTriplePlayMulticastTvVID OBJECT-TYPE Specifies the multicast TV outer vlan. | 1.3.6.1.4.1.89.48.51.1.2 | VlanIndex | read-create | current |
| vlanTriplePlayRowStatus OBJECT-TYPE The row status variable, used according to row creation and removal conventions. | 1.3.6.1.4.1.89.48.51.1.3 | RowStatus | read-create | current |
| vlanTriplePlayMulticastTvTable OBJECT-TYPE TriplePlayMulticastTv table saves a list of ports for a certain multicastTvVlan | 1.3.6.1.4.1.89.48.52 | not-accessible | current | |
| vlanTriplePlayMulticatTvEntry OBJECT-TYPE entry of triple play MulticastTv table | 1.3.6.1.4.1.89.48.52.1 | not-accessible | current | |
| vlanTriplePlayMulticastTvMulticastTvVID OBJECT-TYPE Specifies the multicast TV external vlan. | 1.3.6.1.4.1.89.48.52.1.1 | VlanIndex | read-only | current |
| vlanTriplePlayMulticastTvMulticastTvPortList OBJECT-TYPE the multicast tv port list. | 1.3.6.1.4.1.89.48.52.1.2 | PortList | read-write | current |
| vlanDefaultExtManagment OBJECT-TYPE enable disable ext managment on default vlan. | 1.3.6.1.4.1.89.48.53 | TruthValue | read-write | current |
| vlanVoice OBJECT-IDENTITY | 1.3.6.1.4.1.89.48.54 | |||
| vlanVoiceAgingTimeout OBJECT-TYPE The vlanVoiceAgingTimeout indicates the time (in units of minutes) from when the last OUI MAC was ageout from the FDB the port will be removed from the Voice VLAN. The default value for vlanVoiceAgingTimeout object is 1440 minutes (24 hours). The value of this object must be restored from non-volatile storage after a re-initialization of the management system. | 1.3.6.1.4.1.89.48.54.1 | INTEGER (1..43200) | read-write | current |
| vlanVoiceTable OBJECT-TYPE A table containing static configuration information for each voice VLAN configured into the device and dynamic port membership. All entries are permanent and will be restored after the device is reset. | 1.3.6.1.4.1.89.48.54.2 | not-accessible | current | |
| vlanVoiceEntry OBJECT-TYPE Information for a voice VLAN configured into the device by management. | 1.3.6.1.4.1.89.48.54.2.1 | not-accessible | current | |
| vlanVoicePriority OBJECT-TYPE An administratively assigned Priority, which will be used for all traffic on the voice vlan, this gives the packets the requested priority (CoS) within the bridge. | 1.3.6.1.4.1.89.48.54.2.1.1 | INTEGER (0..7) | read-write | current |
| vlanVoicePriorityRemark OBJECT-TYPE Remark VPT on tagged frames egress the voice vlan according. to priority true.false | 1.3.6.1.4.1.89.48.54.2.1.2 | TruthValue | read-create | current |
| vlanVoiceRowStatus OBJECT-TYPE This object indicates the status of this entry. | 1.3.6.1.4.1.89.48.54.2.1.3 | RowStatus | read-create | current |
| vlanVoiceOUITable OBJECT-TYPE A table containing static global configuration information for Voice VLANs OUI MAC Prefixes. All entries are permanent and will be restored after the device is reset. | 1.3.6.1.4.1.89.48.54.3 | not-accessible | current | |
| vlanVoiceOUIEntry OBJECT-TYPE Information for a voice VLANs OUI MAC Prefixes configured into the device by management. | 1.3.6.1.4.1.89.48.54.3.1 | not-accessible | current | |
| vlanVoiceOUIPrefix OBJECT-TYPE The index value used to identify the OUI MAC Prefix component associated with this entry. The value of this object is used as an index to the vlanVoiceOUITable. Voice VLANs OUI Prefix is the first 3 most significant octets of the MAC address. | 1.3.6.1.4.1.89.48.54.3.1.1 | OCTET STRING (SIZE(3)) | not-accessible | current |
| vlanVoiceOUIDescription OBJECT-TYPE An optional text that describes the OUI. | 1.3.6.1.4.1.89.48.54.3.1.2 | DisplayString (SIZE(0..32)) | read-write | current |
| vlanVoiceOUIEntryRowStatus OBJECT-TYPE This object indicates the status of this entry. | 1.3.6.1.4.1.89.48.54.3.1.3 | RowStatus | read-create | current |
| vlanVoicePortTable OBJECT-TYPE A table containing static and dynamic per port configuration information for Voice VLAN. All entries are permanent and will be restored after the device is reset. | 1.3.6.1.4.1.89.48.54.4 | not-accessible | current | |
| vlanVoicePortEntry OBJECT-TYPE Static and dynamic per port information for a voice VLAN. | 1.3.6.1.4.1.89.48.54.4.1 | not-accessible | current | |
| vlanVoicePortEnable OBJECT-TYPE Enable this port to be a candidate to be added into the Voice VLAN. | 1.3.6.1.4.1.89.48.54.4.1.1 | TruthValue | read-write | current |
| vlanVoicePortVlanIndex OBJECT-TYPE The Voice VLAN-ID the port is a candidate to be in. | 1.3.6.1.4.1.89.48.54.4.1.2 | VlanIndex | read-write | current |
| vlanVoicePortSecure OBJECT-TYPE Specify this port to be in Secure Mode when entering the Voice VLAN. In Secure mode only frames with MAC prefix matched to one of the OUI table prefixes are accepted, otherwise dropped. | 1.3.6.1.4.1.89.48.54.4.1.3 | TruthValue | read-write | current |
| vlanVoicePortCurrentMembership OBJECT-TYPE Port's current status of membership in Voice VLAN. Port's possible values of membership in Voice VLAN: 'Active(1)' - Port is currently added to a Voice VLAN . 'NotActive(2)' - Specifies either that port is a candidate to be in Voice VLAN or disabled. | 1.3.6.1.4.1.89.48.54.4.1.4 | INTEGER {active(1), notActive(2)} | read-only | current |
| vlanVoicePortQosMode OBJECT-TYPE Port's current QOS mode in Voice VLAN. Possible values: 'src(1)' - Only traffic with OUI prefix in the source MAC received QOS of the Voice Vlan. 'all(2)' - All traffic through that port received QOS of the Voice Vlan. | 1.3.6.1.4.1.89.48.54.4.1.5 | INTEGER {src(1), all(2)} | read-write | current |
| vlanVoiceOUISetToDefault OBJECT-TYPE The vlanVoiceOUISetToDefault indicates that vlanVoiceOUITable should be set to it's default values if existed (OUI default prefixes). To do so the vlanVoiceOUITable should be previuosly deleted by usual entries destroying. This object behaviors as write-only than reading this object will always return 'false'. | 1.3.6.1.4.1.89.48.54.5 | TruthValue | read-write | current |
| vlanDefault OBJECT-IDENTITY | 1.3.6.1.4.1.89.48.55 | |||
| vlanDefaultTaggedPorts OBJECT-TYPE list of default valn tagged ports. | 1.3.6.1.4.1.89.48.55.1 | PortList | read-write | current |
| vlanDefaultEnabledPorts OBJECT-TYPE List of default VLAN membership enabled ports. | 1.3.6.1.4.1.89.48.55.2 | PortList | read-write | current |
| vlanInetTriplePlayTable OBJECT-TYPE TriplePlay table, map CPE vlan to multicastTvVlan | 1.3.6.1.4.1.89.48.56 | not-accessible | current | |
| vlanInetTriplePlayEntry OBJECT-TYPE entry of TriplePlay table | 1.3.6.1.4.1.89.48.56.1 | not-accessible | current | |
| vlanInetTriplePlayInetAddressType OBJECT-TYPE Inet type IPv4/IPv6. | 1.3.6.1.4.1.89.48.56.1.1 | InetAddressType | read-only | current |
| vlanInetTriplePlayInnerVID OBJECT-TYPE Specifies the CPE inner vlan. | 1.3.6.1.4.1.89.48.56.1.2 | VlanIndex | not-accessible | current |
| vlanInetTriplePlayMulticastTvVID OBJECT-TYPE Specifies the multicast TV outer vlan. | 1.3.6.1.4.1.89.48.56.1.3 | VlanIndex | read-create | current |
| vlanInetTriplePlayRowStatus OBJECT-TYPE The row status variable, used according to row creation and removal conventions. | 1.3.6.1.4.1.89.48.56.1.4 | RowStatus | read-create | current |
| vlanInetTriplePlayMulticastTvTable OBJECT-TYPE TriplePlayMulticastTv table saves a list of ports for a certain multicastTvVlan | 1.3.6.1.4.1.89.48.57 | not-accessible | current | |
| vlanInetTriplePlayMulticatTvEntry OBJECT-TYPE entry of triple play MulticastTv table | 1.3.6.1.4.1.89.48.57.1 | not-accessible | current | |
| vlanInetTriplePlayMulticastTvMulticastTvVID OBJECT-TYPE Specifies the multicast TV external vlan. | 1.3.6.1.4.1.89.48.57.1.1 | VlanIndex | read-only | current |
| vlanInetTriplePlayMulticastTvMulticastTvPortList OBJECT-TYPE the multicast tv port list. | 1.3.6.1.4.1.89.48.57.1.2 | PortList | read-write | current |
| vlanAsymmetricEnabled OBJECT-TYPE Indicates enabled or disabled of Asymetric Vlan | 1.3.6.1.4.1.89.48.58 | TruthValue | read-write | current |
| vlanPrivateTable OBJECT-TYPE Private vlan table which contains the private vlan entries. | 1.3.6.1.4.1.89.48.59 | not-accessible | current | |
| vlanPrivateEntry OBJECT-TYPE Private vlan entry which contains the private vlan definition. | 1.3.6.1.4.1.89.48.59.1 | not-accessible | current | |
| vlanPrivateVid OBJECT-TYPE The static vlan ID which is set to one of the private vlan types. | 1.3.6.1.4.1.89.48.59.1.1 | VlanIndex | not-accessible | current |
| vlanPrivateType OBJECT-TYPE private vlan types: primary - Carries traffic from promiscuous ports. promiscuous port can communicate with all ports of the same PVLAN, including the isolated and community ports of the same PVLAN. isolated - Carries traffic from isolated ports. isolated ports can communicate only with the promiscuous ports of the same PVLAN. community - Carries traffic from community ports. community ports of the same community can communicate among themselves and with the promiscuous ports of the same PVLAN. | 1.3.6.1.4.1.89.48.59.1.2 | INTEGER {primary(1), isolated(2), community(3)} | read-write | current |
| vlanPrivatePrimaryVid OBJECT-TYPE The primary vlan ID which has defined in VlanPrivateEntry and which is associated with secondary vlan (in vlanPrivateMapTable). vlanPrivatePrimaryVid is equivalent to vlanPrivateVid when vlanPrivateVid is primary vlan. | 1.3.6.1.4.1.89.48.59.1.3 | VlanIndex | read-only | current |
| vlanPrivateStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.89.48.59.1.4 | RowStatus | read-write | current |
| vlanPrivateMapTable OBJECT-TYPE Private vlan mapping table which contains the private vlan mapping entries. | 1.3.6.1.4.1.89.48.60 | not-accessible | current | |
| vlanPrivateMapEntry OBJECT-TYPE Private vlan mapping entry which contains the primary / secondary private vlan association and their ports membership. | 1.3.6.1.4.1.89.48.60.1 | not-accessible | current | |
| vlanPrivateMapPrimaryVid OBJECT-TYPE The primary private vlan ID which is associated with the secondary (isolated or community) vlan (vlanPrivateMapSecondaryVid). | 1.3.6.1.4.1.89.48.60.1.1 | VlanIndex | not-accessible | current |
| vlanPrivateMapSecondaryVid OBJECT-TYPE The secondary private vlan ID which is associated with the primary vlan (vlanPrivateMapPrimaryVid). | 1.3.6.1.4.1.89.48.60.1.2 | VlanIndex | not-accessible | current |
| vlanPrivateMapPrimaryPorts OBJECT-TYPE The private vlan promiscuous ports mode which are belongs to the association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid. | 1.3.6.1.4.1.89.48.60.1.3 | PortList | read-write | current |
| vlanPrivateMapSecondaryPorts OBJECT-TYPE The private vlan host ports mode which are belongs to the association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid. | 1.3.6.1.4.1.89.48.60.1.4 | PortList | read-write | current |
| vlanPrivateMapPrimaryOperPorts OBJECT-TYPE The private vlan active promiscuous ports mode which are belongs to the association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid. | 1.3.6.1.4.1.89.48.60.1.5 | PortList | read-only | current |
| vlanPrivateMapSecondaryOperPorts OBJECT-TYPE The private vlan active host ports mode which are belongs to the association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid. | 1.3.6.1.4.1.89.48.60.1.6 | PortList | read-only | current |
| vlanPrivateMapStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.89.48.60.1.7 | RowStatus | read-write | current |
| vlanTrunkPortModeTable OBJECT-TYPE The tables contains trunk mode port entries. | 1.3.6.1.4.1.89.48.61 | not-accessible | current | |
| vlanTrunkPortModeEntry OBJECT-TYPE The entry contains port ifIndex,native vlan id and vlan list the port has a membership. The vlan list can contain not created vlans. | 1.3.6.1.4.1.89.48.61.1 | not-accessible | current | |
| vlanTrunkPortModeNativeVlanId OBJECT-TYPE Indicated native vlan index.Default value 0 | 1.3.6.1.4.1.89.48.61.1.1 | VlanIndex | read-write | current |
| vlanTrunkModeList1to1024 OBJECT-TYPE vlan trunk mode list 1. Default value is {0} | 1.3.6.1.4.1.89.48.61.1.2 | VlanList1 | read-write | current |
| vlanTrunkModeList1025to2048 OBJECT-TYPE vlan trunk mode list 2. Default value is {0} | 1.3.6.1.4.1.89.48.61.1.3 | VlanList2 | read-write | current |
| vlanTrunkModeList2049to3072 OBJECT-TYPE vlan trunk mode list 3. Default value is {0} | 1.3.6.1.4.1.89.48.61.1.4 | VlanList3 | read-write | current |
| vlanTrunkModeList3073to4094 OBJECT-TYPE vlan trunk mode list 4. Default value is {0} | 1.3.6.1.4.1.89.48.61.1.5 | VlanList4 | read-write | current |
| vlanAccessPortModeTable OBJECT-TYPE The tables contains access mode port entries. | 1.3.6.1.4.1.89.48.62 | not-accessible | current | |
| vlanAccessPortModeEntry OBJECT-TYPE The entry contains port ifIndex,access vlan id and multicast TV vlan id. | 1.3.6.1.4.1.89.48.62.1 | not-accessible | current | |
| vlanAccessPortModeVlanId OBJECT-TYPE Indicated access vlan id.Default value is 0 | 1.3.6.1.4.1.89.48.62.1.1 | VlanIndex | read-write | current |
| vlanAccessPortModeMcstTvVlanId OBJECT-TYPE Indicated multicast TV vlan id. | 1.3.6.1.4.1.89.48.62.1.2 | VlanIndex | read-write | current |
| vlanCustomerPortModeTable OBJECT-TYPE The tables contains customer mode port entries. | 1.3.6.1.4.1.89.48.63 | not-accessible | current | |
| vlanCustomerPortModeEntry OBJECT-TYPE The entry contains port ifIndex,customer vlan id and customer multicast TV vlan id. | 1.3.6.1.4.1.89.48.63.1 | not-accessible | current | |
| vlanCustomerPortModeVlanId OBJECT-TYPE Indicated customer vlan id.Default value is 0 | 1.3.6.1.4.1.89.48.63.1.1 | VlanIndex | read-write | current |
| vlanCustomerPortModeMtvList1to1024 OBJECT-TYPE vlan customer port mode multicast TV list 1. Default value is {0} | 1.3.6.1.4.1.89.48.63.1.2 | VlanList1 | read-only | current |
| vlanCustomerPortModeMtvList1025to2048 OBJECT-TYPE vlan customer port mode multicast TV list 2. Default value is {0} | 1.3.6.1.4.1.89.48.63.1.3 | VlanList2 | read-only | current |
| vlanCustomerPortModeMtvList2049to3072 OBJECT-TYPE vlan customer port mode multicast TV list 3. Default value is {0} | 1.3.6.1.4.1.89.48.63.1.4 | VlanList3 | read-only | current |
| vlanCustomerPortModeMtvList3073to4094 OBJECT-TYPE vlan customer port mode multicast TV list 4. Default value is {0} | 1.3.6.1.4.1.89.48.63.1.5 | VlanList4 | read-only | current |
| vlanSwitchPortModeTable OBJECT-TYPE The table defines L3/L2 port context. | 1.3.6.1.4.1.89.48.64 | not-accessible | current | |
| vlanSwitchPortModeEntry OBJECT-TYPE The entry contains port ifIndex and switch port enable value. | 1.3.6.1.4.1.89.48.64.1 | not-accessible | current | |
| vlanSwitchPortModeCategory OBJECT-TYPE Indicated if a port is switchport (l2 port) or no switchport (l3 port) 1 - switchport 2 - no switchport. Default is 1 | 1.3.6.1.4.1.89.48.64.1.1 | INTEGER {l2(1), l3(2)} | read-write | current |
| vlanPortModeContextTable OBJECT-TYPE The tables contains current port mode context entries. | 1.3.6.1.4.1.89.48.65 | not-accessible | current | |
| vlanPortModeContextEntry OBJECT-TYPE The entry contains current port mode context. | 1.3.6.1.4.1.89.48.65.1 | not-accessible | current | |
| vlanPortModeContextValue OBJECT-TYPE Indicated port context value: 0. Lag 1. Monitor 2. L3 3. RAVA 4. Dot1x 5. Dot1q 6. Access 7. Trunk 8. Customer 9. PV_promisc 10. PV_host | 1.3.6.1.4.1.89.48.65.1.1 | INTEGER | read-write | current |
| vlanRsvlEnable OBJECT-TYPE Enable / Disable Shared Vlans at the device. | 1.3.6.1.4.1.89.48.66 | INTEGER {enable(1), disable(2)} | read-write | current |
| vlanRsvlMapTable OBJECT-TYPE Shared vlan learning mapping table which contains the SVL mapping entries. | 1.3.6.1.4.1.89.48.67 | not-accessible | current | |
| vlanRsvlMapEntry OBJECT-TYPE SVL mapping entry which contains the primary / secondary SVL association. | 1.3.6.1.4.1.89.48.67.1 | not-accessible | current | |
| vlanRsvlMapPrimaryVid OBJECT-TYPE The primary SVL ID which is associated with the secondary shared vlan vlanRsvlMapSecondaryVid. | 1.3.6.1.4.1.89.48.67.1.1 | VlanIndex | not-accessible | current |
| vlanRsvlMapSecondaryVid OBJECT-TYPE The secondary SVL ID which is associated with the primary shared vlan vlanRsvlMapPrimaryVid. | 1.3.6.1.4.1.89.48.67.1.2 | VlanIndex | not-accessible | current |
| vlanRsvlMapStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.89.48.67.1.3 | RowStatus | read-write | current |
| rldot1qPortVlanStaticTable OBJECT-TYPE A table containing static vlan port membership information. | 1.3.6.1.4.1.89.48.68 | not-accessible | current | |
| rldot1qPortVlanStaticEntry OBJECT-TYPE Static vlan membership information per port | 1.3.6.1.4.1.89.48.68.1 | not-accessible | current | |
| rldot1qPortVlanStaticEgressList1to1024 OBJECT-TYPE The port egress vlan static list.Default value is {0} | 1.3.6.1.4.1.89.48.68.1.1 | VlanList1 | read-write | current |
| rldot1qPortVlanStaticEgressList1025to2048 OBJECT-TYPE The port egress vlan static list.Default value is {0} | 1.3.6.1.4.1.89.48.68.1.2 | VlanList2 | read-write | current |
| rldot1qPortVlanStaticEgressList2049to3072 OBJECT-TYPE The port egress vlan static list.Default value is {0} | 1.3.6.1.4.1.89.48.68.1.3 | VlanList3 | read-write | current |
| rldot1qPortVlanStaticEgressList3073to4094 OBJECT-TYPE The port egress vlan static list.Default value is {0} | 1.3.6.1.4.1.89.48.68.1.4 | VlanList4 | read-write | current |
| rldot1qPortVlanStaticUntaggedEgressList1to1024 OBJECT-TYPE The port egress untagged vlan static list.Default value is {0} | 1.3.6.1.4.1.89.48.68.1.5 | VlanList1 | read-write | current |
| rldot1qPortVlanStaticUntaggedEgressList1025to2048 OBJECT-TYPE The port egress untagged vlan static list.Default value is {0} | 1.3.6.1.4.1.89.48.68.1.6 | VlanList2 | read-write | current |
| rldot1qPortVlanStaticUntaggedEgressList2049to3072 OBJECT-TYPE The port egress untagged vlan static list.Default value is {0} | 1.3.6.1.4.1.89.48.68.1.7 | VlanList3 | read-write | current |
| rldot1qPortVlanStaticUntaggedEgressList3073to4094 OBJECT-TYPE The port egress untagged vlan static list.Default value is {0} | 1.3.6.1.4.1.89.48.68.1.8 | VlanList4 | read-write | current |
| rldot1qPortVlanStaticForbiddenList1to1024 OBJECT-TYPE The port forbidden vlan static list.Default value is {0} | 1.3.6.1.4.1.89.48.68.1.9 | VlanList1 | read-write | current |
| rldot1qPortVlanStaticForbiddenList1025to2048 OBJECT-TYPE The port forbidden vlan static list.Default value is {0} | 1.3.6.1.4.1.89.48.68.1.10 | VlanList2 | read-write | current |
| rldot1qPortVlanStaticForbiddenList2049to3072 OBJECT-TYPE The port forbidden vlan static list.Default value is {0} | 1.3.6.1.4.1.89.48.68.1.11 | VlanList3 | read-write | current |
| rldot1qPortVlanStaticForbiddenList3073to4094 OBJECT-TYPE The port forbidden vlan static list.Default value is {0} | 1.3.6.1.4.1.89.48.68.1.12 | VlanList4 | read-write | current |
| rldot1qVlanStaticListTable OBJECT-TYPE A table contains only one entry of a static vlan list. | 1.3.6.1.4.1.89.48.69 | not-accessible | current | |
| rldot1qVlanStaticListEntry OBJECT-TYPE Staticly created by local or network management vlan list | 1.3.6.1.4.1.89.48.69.1 | not-accessible | current | |
| rldot1qVlanStaticListIndex OBJECT-TYPE An index is entrie's sequence. This field substitutes a vlan type. If the vlan was created by user configuration then the type is static. If the vlan was created by GVRP/MVRP protocols then the type is dynamicGvrp. If the vlan was created by Radius server attribute assignment mechanism then the type is dynamicRava. | 1.3.6.1.4.1.89.48.69.1.1 | INTEGER {static(0), dynamicGvrp(1), dynamicRava(2)} | read-write | current |
| rldot1qVlanStaticList1to1024 OBJECT-TYPE A list of staticaly created vlans from 1 to 1024. | 1.3.6.1.4.1.89.48.69.1.2 | VlanList1 | read-write | current |
| rldot1qVlanStaticList1025to2048 OBJECT-TYPE A list of according to the type field created vlans from 1025 to 2048. | 1.3.6.1.4.1.89.48.69.1.3 | VlanList2 | read-write | current |
| rldot1qVlanStaticList2049to3072 OBJECT-TYPE A list of according to the type field created vlans from 2049 to 3072. | 1.3.6.1.4.1.89.48.69.1.4 | VlanList3 | read-write | current |
| rldot1qVlanStaticList3073to4094 OBJECT-TYPE A list of according to the type field created vlans from 3073 to 4094. | 1.3.6.1.4.1.89.48.69.1.5 | VlanList4 | read-write | current |
| rldot1qVlanStaticNameTable OBJECT-TYPE A table contains created by user vlans names. | 1.3.6.1.4.1.89.48.70 | not-accessible | current | |
| rldot1qVlanStaticNameEntry OBJECT-TYPE Staticly created by local or network management vlan list | 1.3.6.1.4.1.89.48.70.1 | not-accessible | current | |
| rldot1qVlanStaticName OBJECT-TYPE An administratively assigned string,which may be used to identify the VLAN. The VLAN name must be unique or no name. | 1.3.6.1.4.1.89.48.70.1.1 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| rlPortVlanTriplePlayMulticastTvTable OBJECT-TYPE A table saves a list of vlans per port/lag. | 1.3.6.1.4.1.89.48.71 | not-accessible | current | |
| rlPortVlanTriplePlayMulticastTvEntry OBJECT-TYPE Entry of Triple Play Multicast Tv table. | 1.3.6.1.4.1.89.48.71.1 | not-accessible | current | |
| rlPortVlanTriplePlayMulticastTvList1to1024 OBJECT-TYPE A list of staticaly created Triple Play MTV vlans from 1 to 1024. | 1.3.6.1.4.1.89.48.71.1.1 | VlanList1 | read-write | current |
| rlPortVlanTriplePlayMulticastTvList1025to2048 OBJECT-TYPE A list of staticaly created Triple Play MTV vlans from 1025 to 2048. | 1.3.6.1.4.1.89.48.71.1.2 | VlanList2 | read-write | current |
| rlPortVlanTriplePlayMulticastTvList2049to3072 OBJECT-TYPE A list of staticaly created Triple Play MTV vlans from 2049 to 3072. | 1.3.6.1.4.1.89.48.71.1.3 | VlanList3 | read-write | current |
| rlPortVlanTriplePlayMulticastTvList3073to4094 OBJECT-TYPE A list of staticaly created Triple Play MTV vlans from 3073 to 4094. | 1.3.6.1.4.1.89.48.71.1.4 | VlanList4 | read-write | current |
| rldot1qVlanMembershipTypeTable OBJECT-TYPE A table contains a bitmap of the VLAN owners(applications) that can create the VLAN and/or add a port to the VLAN. | 1.3.6.1.4.1.89.48.72 | not-accessible | current | |
| rldot1qVlanMembershipTypeEntry OBJECT-TYPE Staticly or dynamicly created VLAN ID owner entry | 1.3.6.1.4.1.89.48.72.1 | not-accessible | current | |
| rldot1qVlanMembershipTypeBitmap OBJECT-TYPE This field contains a bitmap of owners that can creates and/or add a port to the VLAN. There exist three such type of owners : Default VLAN Manual created VLAN Dynamic(RAVA)created VLAN GVRP(MVRP)created VLAN | 1.3.6.1.4.1.89.48.72.1.1 | INTEGER | read-only | current |