MIBs Depot

Dell-Tuning

Registered at
1.3.6.1.4.1.89.29
Last updated
2006-02-12 00:00
Organization
Dell
Revisions
2009-03-03 00:00, 2006-02-12 00:00, 2004-06-01 00:00
Namespace
dell
Source file
Dell-Tuning
Digest
sha256:1edd1e800624281ca9d2ccd29f3310f798ea7054bbd51ac6d68455d8e27e0c19

Description

The private MIB module definition for RND device tuning MIB.

Contact

www.dell.com

Imports

FromSymbols
Dell-BRIDGEMIBOBJECTS-MIBVlanList1, VlanList2, VlanList3, VlanList4
Dell-MIBrnd
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIIpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
Dell-BRIDGEMIBOBJECTS-MIB
Dell-MIB
Dell-Tuning
IANAifType-MIB
IF-MIB
P-BRIDGE-MIB
Q-BRIDGE-MIB
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
TOKEN-RING-RMON-MIB

Under this module's arcs

Where the registration tree carries on below this module.

ArcNameModule
1.3.6.1.4.1.89.29.8rsMaxEntriesTuning
1.3.6.1.4.1.89.29.15rlSshTuningRADLAN-Tuning

Objects

NameOIDSyntaxAccessStatus
rsHighPriority
OBJECT-TYPE
This variable indicates the time interval the forwarding task inside the RS works in High Priority Mode.
1.3.6.1.4.1.89.29.1INTEGERread-writecurrent
rsLowPriority
OBJECT-TYPE
This variable indicates the time interval the forwarding task inside the RS works in Low Priority Mode.
1.3.6.1.4.1.89.29.2INTEGERread-writecurrent
rsDbgLevel
OBJECT-TYPE
This variable indicates the debug level the Router Server works. the range of this variable is 1..100
1.3.6.1.4.1.89.29.3INTEGERread-writecurrent
rsDiagnosticsTable
OBJECT-TYPE
The diagnostics table of the agent
1.3.6.1.4.1.89.29.4not-accessiblecurrent
rsDiagnosticsEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.29.4.1not-accessiblecurrent
rsDiagnosticsRequestId
OBJECT-TYPE
The request id of the rejected SNMP request whose diagnostics are specified by this entry. If request id 0xFFFFFFFF is given, the diagnostic of the last rejected SNMP request sent by the querying NMS is returned.
1.3.6.1.4.1.89.29.4.1.1INTEGERread-onlycurrent
rsDiagnosticsCode
OBJECT-TYPE
The code of the rejected the SNMP request whose diagnostics are specified by this entry. This code may be used to find out the reason for rejection if the diagnostic text is unavailable.
1.3.6.1.4.1.89.29.4.1.2INTEGERread-onlycurrent
rsDiagnosticsLocation
OBJECT-TYPE
The internal location in the SW rejecting the SNMP request whose diagnostics are specified by this entry. This information is available for debugging purposes only and will be returned in GET requests only if rsDbgLevel >= 99.
1.3.6.1.4.1.89.29.4.1.3INTEGERread-onlycurrent
rsDiagnosticsText
OBJECT-TYPE
The diagnostic text of the rejected SNMP request whose diagnostics are specified by this entry.
1.3.6.1.4.1.89.29.4.1.4DisplayString (SIZE(1..160))read-onlycurrent
rsConfirmMessagTab
OBJECT-TYPE
This variable enables the operator to confirm all the message in the event Message Table.
1.3.6.1.4.1.89.29.5INTEGERread-writecurrent
eventMessageTable
OBJECT-TYPE
The Event Message table of the agent
1.3.6.1.4.1.89.29.6not-accessiblecurrent
eventMessageEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.29.6.1not-accessiblecurrent
eventNum
OBJECT-TYPE
The event number,the index of this table.
1.3.6.1.4.1.89.29.6.1.1INTEGERread-onlycurrent
eventDesc
OBJECT-TYPE
The event discription, this text will include time and severity.
1.3.6.1.4.1.89.29.6.1.2DisplayStringread-onlycurrent
reaTunning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.7
reaIpForwardEnable
OBJECT-TYPE
The Platform will perform fast IP forwarding if only if this variable's value is enable.
1.3.6.1.4.1.89.29.7.4INTEGER {enable(1), disable(2)}read-writecurrent
reaIpxForwardEnable
OBJECT-TYPE
The Platform will perform fast IPX forwarding if only if this variable's value is enable.
1.3.6.1.4.1.89.29.7.5INTEGER {enable(1), disable(2)}read-writecurrent
rsMaxEntriesTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8
rsMaxBridgeForwardingEntriesTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.1
rsMaxBrgFrwEntries
OBJECT-TYPE
Maximal number of entries in bridge forwarding table.
1.3.6.1.4.1.89.29.8.1.1INTEGERread-onlycurrent
rsMaxBrgFrwEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in bridge forwarding table.
1.3.6.1.4.1.89.29.8.1.2INTEGERread-writecurrent
rsMaxIpForwardingEntriesTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.2
rsMaxIpFrwEntries
OBJECT-TYPE
Maximal number of entries in Ip forwarding table.
1.3.6.1.4.1.89.29.8.2.1INTEGERread-onlycurrent
rsMaxIpFrwEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in Ip forwarding table.
1.3.6.1.4.1.89.29.8.2.2INTEGERread-writecurrent
rsMaxArpEntriesTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.3
rsMaxArpEntries
OBJECT-TYPE
Maximal number of entries in Arp forwarding table.
1.3.6.1.4.1.89.29.8.3.1INTEGERread-onlycurrent
rsMaxArpEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in Arp forwarding table.
1.3.6.1.4.1.89.29.8.3.2INTEGERread-writecurrent
rsMaxIpxForwardingEntriesTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.4
rsMaxIpxFrwEntries
OBJECT-TYPE
Maximal number of entries in Ipx forwarding table.
1.3.6.1.4.1.89.29.8.4.1INTEGERread-onlycurrent
rsMaxIpxFrwEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in Ipx forwarding table.
1.3.6.1.4.1.89.29.8.4.2INTEGERread-writecurrent
rsMaxIpxSapEntriesTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.5
rsMaxIpxSapEntries
OBJECT-TYPE
Maximal number of entries in IpxSap table.
1.3.6.1.4.1.89.29.8.5.1INTEGERread-onlycurrent
rsMaxIpxSapEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in IpxSap table.
1.3.6.1.4.1.89.29.8.5.2INTEGERread-writecurrent
rsMaxDspClntEntriesTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.6
rsMaxDspClntEntries
OBJECT-TYPE
Maximal number of entries in rsSdClientsTable.
1.3.6.1.4.1.89.29.8.6.1INTEGERread-onlycurrent
rsMaxDspClntEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in rsSdClientsTable.
1.3.6.1.4.1.89.29.8.6.2INTEGERread-writecurrent
rsMaxIpFftEntriesTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.9
rsMaxIpSFftEntries
OBJECT-TYPE
The current maximal size of one IP SFFT Table.
1.3.6.1.4.1.89.29.8.9.1INTEGERread-onlycurrent
rsMaxIpSFftEntriesAfterReset
OBJECT-TYPE
The future (after reset) maximal size of one IP SFFT Table.
1.3.6.1.4.1.89.29.8.9.2INTEGERread-writecurrent
rsMaxIpNFftEntries
OBJECT-TYPE
The current maximal size of one IP NFFT Table.
1.3.6.1.4.1.89.29.8.9.3INTEGERread-onlycurrent
rsMaxIpNFftEntriesAfterReset
OBJECT-TYPE
The future (after reset) maximal size of one IP NFFT Table.
1.3.6.1.4.1.89.29.8.9.4INTEGERread-writecurrent
rsMaxIpSFftSysEntries
OBJECT-TYPE
The current maximal size of the SYSTEM IP SFFT Table.
1.3.6.1.4.1.89.29.8.9.5INTEGERread-onlycurrent
rsMaxIpSFftSysEntriesAfterReset
OBJECT-TYPE
The future (after reset) maximal size of the SYSTEM IP SFFT Table.
1.3.6.1.4.1.89.29.8.9.6INTEGERread-writecurrent
rsMaxIpNFftSysEntries
OBJECT-TYPE
The current maximal size of the SYSTEM IP NFFT Table.
1.3.6.1.4.1.89.29.8.9.7INTEGERread-onlycurrent
rsMaxIpNFftSysEntriesAfterReset
OBJECT-TYPE
The future (after reset) maximal size of the SYSTEM IP NFFT Table.
1.3.6.1.4.1.89.29.8.9.8INTEGERread-writecurrent
rsMaxIpNextHopEntries
OBJECT-TYPE
The current maximal size of one IP NextHop Table.
1.3.6.1.4.1.89.29.8.9.9INTEGERread-onlycurrent
rsMaxIpNextHopEntriesAfterReset
OBJECT-TYPE
The future (after reset) maximal size of one NextHop Table.
1.3.6.1.4.1.89.29.8.9.10INTEGERread-writecurrent
rsMaxIpxFftEntriesTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.10
rsMaxIpxSFftEntries
OBJECT-TYPE
The current maximal size of one IPX SFFT Table.
1.3.6.1.4.1.89.29.8.10.1INTEGERread-onlycurrent
rsMaxIpxSFftEntriesAfterReset
OBJECT-TYPE
The future (after reset) maximal size of one IPX SFFT Table.
1.3.6.1.4.1.89.29.8.10.2INTEGERread-writecurrent
rsMaxIpxNFftEntries
OBJECT-TYPE
The current maximal size of one IPX NFFT Table.
1.3.6.1.4.1.89.29.8.10.3INTEGERread-onlycurrent
rsMaxIpxNFftEntriesAfterReset
OBJECT-TYPE
The future (after reset) maximal size of one IPX NFFT Table.
1.3.6.1.4.1.89.29.8.10.4INTEGERread-writecurrent
rsMaxIpxSFftSysEntries
OBJECT-TYPE
The current maximal size of the SYSTEM IPX SFFT Table.
1.3.6.1.4.1.89.29.8.10.5INTEGERread-onlycurrent
rsMaxIpxSFftSysEntriesAfterReset
OBJECT-TYPE
The future (after reset) maximal size of the SYSTEM IPX SFFT Table.
1.3.6.1.4.1.89.29.8.10.6INTEGERread-writecurrent
rsMaxIpxNFftSysEntries
OBJECT-TYPE
The current maximal size of the SYSTEM IPX NFFT Table.
1.3.6.1.4.1.89.29.8.10.7INTEGERread-onlycurrent
rsMaxIpxNFftSysEntriesAfterReset
OBJECT-TYPE
The future (after reset) maximal size of the SYSTEM IPX NFFT Table.
1.3.6.1.4.1.89.29.8.10.8INTEGERread-writecurrent
rsMaxDhcpTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.11
rsMaxDhcpConns
OBJECT-TYPE
The current maximal number of DHCP connections.
1.3.6.1.4.1.89.29.8.11.1INTEGERread-onlycurrent
rsMaxDhcpConnsAfterReset
OBJECT-TYPE
The future (after reset) maximal number of DHCP connections.
1.3.6.1.4.1.89.29.8.11.2INTEGERread-writecurrent
rsMaxIpmTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.12
rsMaxIpmFftEntriesTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.12.1
rsMaxIpmFftEntries
OBJECT-TYPE
The current maximal number of the IPM FFT Tables.
1.3.6.1.4.1.89.29.8.12.1.1INTEGERread-onlycurrent
rsMaxIpmFftEntriesAfterReset
OBJECT-TYPE
The future (after reset) maximal number of the IPM FFT Tables.
1.3.6.1.4.1.89.29.8.12.1.2INTEGERread-writecurrent
rsIpmFftAging
OBJECT-TYPE
The aging timeout of the IPM FFT Tables.
1.3.6.1.4.1.89.29.8.12.1.3INTEGERread-writecurrent
rsMaxIgmpTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.12.2
rsMaxIgmpInterfaceEntries
OBJECT-TYPE
Maximal number of entries in the IGMP Neighbor Table.
1.3.6.1.4.1.89.29.8.12.2.1INTEGERread-onlycurrent
rsMaxIgmpInterfaceEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in the IGMP Neighbor Table.
1.3.6.1.4.1.89.29.8.12.2.2INTEGERread-writecurrent
rsMaxIgmpCacheEntries
OBJECT-TYPE
Maximal number of entries in the IGMP Cache Table.
1.3.6.1.4.1.89.29.8.12.2.3INTEGERread-onlycurrent
rsMaxIgmpCacheEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in the IGMP Cache Table.
1.3.6.1.4.1.89.29.8.12.2.4INTEGERread-writecurrent
rsMaxPimTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.12.3
rsMaxPimNeighborEntries
OBJECT-TYPE
Maximal number of entries in the PIM Neighbor Table.
1.3.6.1.4.1.89.29.8.12.3.1INTEGERread-onlycurrent
rsMaxPimNeighborEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in the PIM Neighbor Table.
1.3.6.1.4.1.89.29.8.12.3.2INTEGERread-writecurrent
rsMaxPimRouteEntries
OBJECT-TYPE
Maximal number of entries in the PIM Route Table.
1.3.6.1.4.1.89.29.8.12.3.3INTEGERread-onlycurrent
rsMaxPimRouteEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in the PIM Route Table.
1.3.6.1.4.1.89.29.8.12.3.4INTEGERread-writecurrent
rsMaxPimRouteNextHopEntries
OBJECT-TYPE
Maximal number of entries in the PIM Route Next Hop Table.
1.3.6.1.4.1.89.29.8.12.3.5INTEGERread-onlycurrent
rsMaxPimRouteNextHopEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in the PIM Route Next Hop Table.
1.3.6.1.4.1.89.29.8.12.3.6INTEGERread-writecurrent
rsMaxPimInterfaceEntriesAfterReset
OBJECT-TYPE
Future maximal number of interfaces in the PIM Interface Table.
1.3.6.1.4.1.89.29.8.12.3.7INTEGERread-writecurrent
rsMaxPimInterfaceEntries
OBJECT-TYPE
Maximal number of interfaces in the PIM Interface Table.
1.3.6.1.4.1.89.29.8.12.3.8INTEGERread-writecurrent
rsMaxDvmrpTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.12.4
rsMaxDvmrpNeighborEntries
OBJECT-TYPE
Maximal number of entries in the Dvmrp Neighbor Table.
1.3.6.1.4.1.89.29.8.12.4.1INTEGERread-onlycurrent
rsMaxDvmrpNeighborEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in the Dvmrp Neighbor Table.
1.3.6.1.4.1.89.29.8.12.4.2INTEGERread-writecurrent
rsMaxDvmrpRouteEntries
OBJECT-TYPE
Maximal number of entries in the Dvmrp Route Table.
1.3.6.1.4.1.89.29.8.12.4.3INTEGERread-onlycurrent
rsMaxDvmrpRouteEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in the Dvmrp Route Table.
1.3.6.1.4.1.89.29.8.12.4.4INTEGERread-writecurrent
rsMaxDvmrpMRouteEntries
OBJECT-TYPE
Maximal number of entries in the Dvmrp Multicast Route Table.
1.3.6.1.4.1.89.29.8.12.4.5INTEGERread-onlycurrent
rsMaxDvmrpMRouteEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in the Dvmrp Multicast Route Table.
1.3.6.1.4.1.89.29.8.12.4.6INTEGERread-writecurrent
rsMaxDvmrpInterfaceEntries
OBJECT-TYPE
Maximal number of interfaces in the Dvmrp Interface Table.
1.3.6.1.4.1.89.29.8.12.4.7INTEGERread-writecurrent
rsMaxDvmrpInterfaceEntriesAfterReset
OBJECT-TYPE
Future maximal number of interfaces in the Dvmrp Interface Table.
1.3.6.1.4.1.89.29.8.12.4.8INTEGERread-writecurrent
rsMaxPigmpTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.12.5
rsMaxPigmpRouteEntries
OBJECT-TYPE
Maximal number of entries in the IGMP Proxy Routing Table.
1.3.6.1.4.1.89.29.8.12.5.1INTEGERread-onlycurrent
rsMaxPigmpRouteEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in the IGMP Proxy Routing Table.
1.3.6.1.4.1.89.29.8.12.5.2INTEGERread-writecurrent
rsMaxPimSmTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.12.6
rsMaxPimSmNeighborEntries
OBJECT-TYPE
Maximal number of entries in the PIM Neighbor Table.
1.3.6.1.4.1.89.29.8.12.6.1INTEGERread-onlycurrent
rsMaxPimSmNeighborEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in the PIM Neighbor Table.
1.3.6.1.4.1.89.29.8.12.6.2INTEGERread-writecurrent
rsMaxPimSmRouteEntries
OBJECT-TYPE
Maximal number of entries in the PIM Route Table.
1.3.6.1.4.1.89.29.8.12.6.3INTEGERread-onlycurrent
rsMaxPimSmRouteEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in the PIM Route Table.
1.3.6.1.4.1.89.29.8.12.6.4INTEGERread-writecurrent
rsMaxPimSmInterfaceEntries
OBJECT-TYPE
Maximal number of entries in the PIM Interface Table.
1.3.6.1.4.1.89.29.8.12.6.5INTEGERread-onlycurrent
rsMaxPimSmInterfaceEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in the PIM Interface Table.
1.3.6.1.4.1.89.29.8.12.6.6INTEGERread-writecurrent
rsMaxPimSmRPSetEntries
OBJECT-TYPE
Maximal number of entries in the RPSet Table.
1.3.6.1.4.1.89.29.8.12.6.7INTEGERread-onlycurrent
rsMaxPimSmRPSetEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in the RPSet Table.
1.3.6.1.4.1.89.29.8.12.6.8INTEGERread-writecurrent
rsMaxPimSmCRPEntries
OBJECT-TYPE
Maximal number of entries in the RPSet Table.
1.3.6.1.4.1.89.29.8.12.6.9INTEGERread-onlycurrent
rsMaxPimSmCRPEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in the RPSet Table.
1.3.6.1.4.1.89.29.8.12.6.10INTEGERread-writecurrent
rsMaxNumberRpAddresesInGroupRange
OBJECT-TYPE
Maximal number of rp addresses per group range in the RPSet Table.
1.3.6.1.4.1.89.29.8.12.6.11INTEGERread-onlycurrent
rsMaxNumberRpAddresesInGroupRangeAfterReset
OBJECT-TYPE
Future maximal number of rp addresses per group range in the RPSet Table.
1.3.6.1.4.1.89.29.8.12.6.12INTEGERread-writecurrent
rsMaxRmonTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.13
rsMaxRmonLogEntries
OBJECT-TYPE
Maximal number of entries in RMON Log table.
1.3.6.1.4.1.89.29.8.13.1INTEGERread-onlycurrent
rsMaxRmonLogEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in RMON Log table.
1.3.6.1.4.1.89.29.8.13.2INTEGERread-writecurrent
rsMaxRmonEtherHistoryEntries
OBJECT-TYPE
Maximal number of entries in RMON EtherHistory table.
1.3.6.1.4.1.89.29.8.13.3INTEGERread-onlycurrent
rsMaxRmonEtherHistoryEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in RMON EtherHistory table.
1.3.6.1.4.1.89.29.8.13.4INTEGERread-writecurrent
rsMaxIgmpSnoopTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.14
rsMaxIgmpSnoopGroupEntries
OBJECT-TYPE
The maximum number of entries in the IGMP Snooping group table.
1.3.6.1.4.1.89.29.8.14.1INTEGERread-onlycurrent
rsMaxIgmpSnoopGroupEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in the IGMP Snooping group table.
1.3.6.1.4.1.89.29.8.14.2INTEGERread-writecurrent
rsMaxVlansTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.15
rsMaxVlansEntries
OBJECT-TYPE
The maximum number of entries in the VLANs table.
1.3.6.1.4.1.89.29.8.15.1INTEGERread-onlycurrent
rsMaxVlansEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in the VLANs table.
1.3.6.1.4.1.89.29.8.15.2INTEGERread-writecurrent
rsMaxPolicyTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.16
rsMaxPolicyMaxRulesEntries
OBJECT-TYPE
Maximal number of entries in the Policy Route Table.
1.3.6.1.4.1.89.29.8.16.1INTEGERread-onlycurrent
rsMaxPolicyMaxRulesEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in the Policy Route Table.
1.3.6.1.4.1.89.29.8.16.2INTEGERread-writecurrent
rsMaxPolicySimpleMibMaxRulesEntries
OBJECT-TYPE
Maximal number of entries in the Policy SimpleMib Table.
1.3.6.1.4.1.89.29.8.16.3INTEGERread-onlycurrent
rsMaxPolicySimpleMibMaxRulesEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in the Policy SimpleMib Table.
1.3.6.1.4.1.89.29.8.16.4INTEGERread-writecurrent
rsMaxPolicySimpleMibMaxProfilesEntries
OBJECT-TYPE
Maximal number of entries in the profile Policy SimpleMib Table.
1.3.6.1.4.1.89.29.8.16.5INTEGERread-onlycurrent
rsMaxPolicySimpleMibMaxProfilesEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in the profile Policy SimpleMib Table.
1.3.6.1.4.1.89.29.8.16.6INTEGERread-writecurrent
rsMaxGvrpVlansTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.17
rsMaxGvrpVlans
OBJECT-TYPE
The maximum number of VLANs that can participant in Gvrp.
1.3.6.1.4.1.89.29.8.17.1INTEGERread-onlycurrent
rsMaxGvrpVlansAfterReset
OBJECT-TYPE
Future maximal number of VLANs that can participant in Gvrp.
1.3.6.1.4.1.89.29.8.17.2INTEGERread-writecurrent
rsMaxTraceRouteTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.18
rsMaxTraceRouteControlEntries
OBJECT-TYPE
The maximum number of trace route control entries.
1.3.6.1.4.1.89.29.8.18.1INTEGERread-onlycurrent
rsMaxTraceRouteControlEntriesAfterReset
OBJECT-TYPE
Future maximum number of trace route control entries.
1.3.6.1.4.1.89.29.8.18.2INTEGERread-writecurrent
rsMaxTraceRouteProbeHistoryEntries
OBJECT-TYPE
The maximum number of trace route probe history entries.
1.3.6.1.4.1.89.29.8.18.3INTEGERread-onlycurrent
rsMaxTraceRouteProbeHistoryEntriesAfterReset
OBJECT-TYPE
Future maximum number of trace route probe history entries.
1.3.6.1.4.1.89.29.8.18.4INTEGERread-writecurrent
rsMaxSnmpTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.19
rsMaxSnmpCommunityEntries
OBJECT-TYPE
The maximum number of snmpCommunityTable entries.
1.3.6.1.4.1.89.29.8.19.1INTEGERread-onlycurrent
rsMaxSnmpCommunityEntriesAfterReset
OBJECT-TYPE
Future maximum number of snmpCommunityTable entries.
1.3.6.1.4.1.89.29.8.19.2INTEGERread-writecurrent
rsMaxSocketTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.20
rsMaxNumberOfSockets
OBJECT-TYPE
Maximal number of sockets.
1.3.6.1.4.1.89.29.8.20.1INTEGERread-onlycurrent
rsMaxNumberOfSocketsAfterReset
OBJECT-TYPE
Future Maximal number of sockets.
1.3.6.1.4.1.89.29.8.20.2INTEGERread-writecurrent
rsMaxSizeOfSocketDataPool
OBJECT-TYPE
Maximal size of socket data pool.
1.3.6.1.4.1.89.29.8.20.3INTEGERread-onlycurrent
rsMaxSizeOfSocketDataPoolAfterReset
OBJECT-TYPE
Future Maximal size of socket data pool.
1.3.6.1.4.1.89.29.8.20.4INTEGERread-writecurrent
rsMaxIpRouteTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.21
rsMaxIpPrefixes
OBJECT-TYPE
Maximal number of IP prefixes that router supports.
1.3.6.1.4.1.89.29.8.21.1INTEGERread-onlycurrent
rsMaxIpPrefixesAfterReset
OBJECT-TYPE
FutureMaximal number of IP prefixes that router supports.
1.3.6.1.4.1.89.29.8.21.2INTEGERread-writecurrent
rsMaxIpNextHopSetTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.22
rsMaxIpNextHopSetEntries
OBJECT-TYPE
Maximal number of NextHops that may be used for forwarding for a destinaton.
1.3.6.1.4.1.89.29.8.22.1INTEGERread-onlycurrent
rsMaxIpNextHopSetEntriesAfterReset
OBJECT-TYPE
FutureMaximal number of NextHops that may be used for forwarding for a destinaton.
1.3.6.1.4.1.89.29.8.22.2INTEGERread-writecurrent
rsMaxIpEcmpTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.23
rsMaxIpEcmpEntrySize
OBJECT-TYPE
Maximum number of ECMP Sets for forwarding.
1.3.6.1.4.1.89.29.8.23.1INTEGERread-onlycurrent
rsMaxIpEcmpEntrySizeAfterReset
OBJECT-TYPE
FutureMaximum number of ECMP Sets for forwarding.
1.3.6.1.4.1.89.29.8.23.2INTEGERread-writecurrent
rsMaxdot1xEapRequestTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.24
rsMaxdot1xEapRequestEntries
OBJECT-TYPE
The maximum number of eap request packets entries that can be retransmitted.
1.3.6.1.4.1.89.29.8.24.1INTEGERread-onlycurrent
rsMaxdot1xEapRequestEntriesAfterReset
OBJECT-TYPE
Future maximum number of eap request packets entries that can be retransmitted.
1.3.6.1.4.1.89.29.8.24.2INTEGERread-writecurrent
rsMaxIpInterfaceTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.25
rsMaxIpInterfaces
OBJECT-TYPE
Maximal number of IP interfaces. Applies to inBand IP interfaces.
1.3.6.1.4.1.89.29.8.25.1INTEGERread-onlycurrent
rsMaxIpInterfacesAfterReset
OBJECT-TYPE
FutureMaximal number of IP interfaces. Applies to inBand IP interfaces.
1.3.6.1.4.1.89.29.8.25.2INTEGERread-writecurrent
rsMaxIpv6FftEntriesTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.26
rsMaxIpv6SFftEntries
OBJECT-TYPE
The current maximal size of one IPV6 SFFT Table.
1.3.6.1.4.1.89.29.8.26.1INTEGERread-onlycurrent
rsMaxIpv6SFftEntriesAfterReset
OBJECT-TYPE
The future (after reset) maximal size of one IPV6 SFFT Table.
1.3.6.1.4.1.89.29.8.26.2INTEGERread-writecurrent
rsMaxIpv6SFftSysEntries
OBJECT-TYPE
The current maximal size of the SYSTEM IPV6 SFFT Table.
1.3.6.1.4.1.89.29.8.26.3INTEGERread-onlycurrent
rsMaxIpv6SFftSysEntriesAfterReset
OBJECT-TYPE
The future (after reset) maximal size of the SYSTEM IPV6 SFFT Table.
1.3.6.1.4.1.89.29.8.26.4INTEGERread-writecurrent
rsMaxIpv6Prefixes
OBJECT-TYPE
Maximal number of IPV6 prefixes that router supports.
1.3.6.1.4.1.89.29.8.26.5INTEGERread-onlycurrent
rsMaxIpv6PrefixesAfterReset
OBJECT-TYPE
FutureMaximal number of IPV6 prefixes that router supports.
1.3.6.1.4.1.89.29.8.26.6INTEGERread-writecurrent
rsMaxIpv6NextHopEntries
OBJECT-TYPE
The current maximal size of one IPV6 NextHop Table.
1.3.6.1.4.1.89.29.8.26.7INTEGERread-onlycurrent
rsMaxIpv6NextHopEntriesAfterReset
OBJECT-TYPE
The future (after reset) maximal size of one NextHop Table.
1.3.6.1.4.1.89.29.8.26.8INTEGERread-writecurrent
rsMaxIpv6NextHopSetEntries
OBJECT-TYPE
Maximal number of NextHops that may be used for forwarding for a destinaton.
1.3.6.1.4.1.89.29.8.26.9INTEGERread-onlycurrent
rsMaxIpv6NextHopSetEntriesAfterReset
OBJECT-TYPE
FutureMaximal number of NextHops that may be used for forwarding for a destinaton.
1.3.6.1.4.1.89.29.8.26.10INTEGERread-writecurrent
rsMaxIpv6GlobalAddresses
OBJECT-TYPE
Maximal global number of IPV6 addresses.
1.3.6.1.4.1.89.29.8.26.11INTEGERread-onlycurrent
rsMaxIpv6GlobalAddressesAfterReset
OBJECT-TYPE
FutureMaximal global number of IPV6 addresses.
1.3.6.1.4.1.89.29.8.26.12INTEGERread-writecurrent
rsMaxArpTunnelStartEntries
OBJECT-TYPE
Maximal global number of tunnel start and ARP entries. Tunnel start refer to tunnel remote station
1.3.6.1.4.1.89.29.8.26.13INTEGERread-onlycurrent
rsMaxArpTunnelStartEntriesAfterReset
OBJECT-TYPE
FutureMaximal global number of tunnel start and ARP entries. Tunnel start refer to tunnel remote station
1.3.6.1.4.1.89.29.8.26.14INTEGERread-writecurrent
rsMaxIpv6InterfaceTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.27
rsMaxIpv6Interfaces
OBJECT-TYPE
Maximal number of IPV6 interfaces. Applies to inBand IPV6 interfaces.
1.3.6.1.4.1.89.29.8.27.1INTEGERread-onlycurrent
rsMaxIpv6InterfacesAfterReset
OBJECT-TYPE
FutureMaximal number of IPV6 interfaces. Applies to inBand IPV6 interfaces.
1.3.6.1.4.1.89.29.8.27.2INTEGERread-writecurrent
rsMaxIpv6AddrPerInterfaces
OBJECT-TYPE
Maximal number of IPV6 Addresses per interfaces.
1.3.6.1.4.1.89.29.8.27.3INTEGERread-onlycurrent
rsMaxIpv6AddrPerInterfacesAfterReset
OBJECT-TYPE
FutureMaximal number of IPV6 Addresses per interfaces.
1.3.6.1.4.1.89.29.8.27.4INTEGERread-writecurrent
rsMaxIpRoutesTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.28
rsMaxIpv4Routes
OBJECT-TYPE
The maximum number of IPv4 routers supported by the IPv4 Unicast Hardware Forwarding Table.
1.3.6.1.4.1.89.29.8.28.1INTEGERread-onlycurrent
rsMaxIpv4RoutesAfterReset
OBJECT-TYPE
Future Maximal number of IPv4 routers supported by the IPv4 Unicast Hardware Forwarding Table.
1.3.6.1.4.1.89.29.8.28.2INTEGERread-writecurrent
rsMaxIpv6Routes
OBJECT-TYPE
The maximum number of IPv6 routers supported by the IPv6 Unicast Hardware Forwarding Table.
1.3.6.1.4.1.89.29.8.28.3INTEGERread-onlycurrent
rsMaxIpv6RoutesAfterReset
OBJECT-TYPE
Future Maximal number of IPv6 routers supported by the IPv6 Unicast Hardware Forwarding Table.
1.3.6.1.4.1.89.29.8.28.4INTEGERread-writecurrent
rsMaxIpmv4Routes
OBJECT-TYPE
The maximum number of IPv4 routers ((*,G) and (S,G)) supported by the IPv4 Multicast Hardware Forwarding Table.
1.3.6.1.4.1.89.29.8.28.5INTEGERread-onlycurrent
rsMaxIpmv4RoutesAfterReset
OBJECT-TYPE
Future Maximal number of IPv4 routers ((*,G) and (S,G)) supported by the IPv4 Multicast Hardware Forwarding Table.
1.3.6.1.4.1.89.29.8.28.6INTEGERread-writecurrent
rsMaxIpmv6Routes
OBJECT-TYPE
The maximum number of IPv6 routers ((*,G) and (S,G)) supported by the IPv6 Multicast Hardware Forwarding Table.
1.3.6.1.4.1.89.29.8.28.7INTEGERread-onlycurrent
rsMaxIpmv6RoutesAfterReset
OBJECT-TYPE
Future Maximal number of IPv6 routers ((*,G) and (S,G)) supported by the IPv6 Multicast Hardware Forwarding Table.
1.3.6.1.4.1.89.29.8.28.8INTEGERread-writecurrent
rsTcpTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.11
rsTcpMemoryPoolSizeAfterReset
OBJECT-TYPE
The size of the memory pool that the tcp will allocate after reset. The memory pool is used for sending packets
1.3.6.1.4.1.89.29.11.1INTEGERread-writecurrent
rsTcpMemoryPoolSize
OBJECT-TYPE
The size of the memory pool that the tcp uses currently. The memory pool is used for sending packets
1.3.6.1.4.1.89.29.11.2INTEGERread-onlycurrent
rsRadiusTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.12
rsRadiusMemoryPoolSizeAfterReset
OBJECT-TYPE
The size of the memory pool that radius will allocate after reset. The memory pool is used for attributes
1.3.6.1.4.1.89.29.12.1INTEGERread-writecurrent
rsRadiusMemoryPoolSize
OBJECT-TYPE
The size of the memory pool that radius uses currently. The memory pool is used for attributes
1.3.6.1.4.1.89.29.12.2INTEGERread-onlycurrent
rlSyslogTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.13
rlSyslogFilePercentToDeleteWhenCompacting
OBJECT-TYPE
When the flash file which is used by reports becomes full, a certain percentage of the old messages on flash are deleted. This is the current value.
1.3.6.1.4.1.89.29.13.3Unsigned32read-onlycurrent
rlSyslogFilePercentToDeleteWhenCompactingAfterReset
OBJECT-TYPE
When the flash file which is used by reports becomes full, a certain percentage of the old messages on flash are deleted. This is the value after reset.
1.3.6.1.4.1.89.29.13.4Unsigned32read-writecurrent
rlSyslogCacheSize
OBJECT-TYPE
The size of memory cache of last errors reported. This cache is cyclic. This is the current value.
1.3.6.1.4.1.89.29.13.5Unsigned32read-onlycurrent
rlSyslogCacheSizeAfterReset
OBJECT-TYPE
The size of memory cache of last errors reported. This cache is cyclic. This is the value after reset.
1.3.6.1.4.1.89.29.13.6Unsigned32read-writecurrent
rlMngInfTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.14
rlMaxNumberOfAccessRules
OBJECT-TYPE
The Maximum number of rules per Access List that can be defined
1.3.6.1.4.1.89.29.14.1INTEGERread-onlycurrent
rlMaxNumberOfAccessRulesAfterReset
OBJECT-TYPE
The Maximum number of rules per Access List for after reset tuning
1.3.6.1.4.1.89.29.14.2INTEGERread-writecurrent
rsDiagnosticTextSource
OBJECT-TYPE
The source from which SNMP diagnostics message texts should be taken.
1.3.6.1.4.1.89.29.16INTEGER {fromCLI(1), fromDiagnosticsTable(2)}read-writecurrent
rsMultiSession
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.17
rsMultiSessionMaxSessionsAfterReset
OBJECT-TYPE
The maximum number of terminal sessions (serial, telnet and ssh) available after reset.
1.3.6.1.4.1.89.29.17.1INTEGERread-writecurrent
rsMultiSessionMaxSessions
OBJECT-TYPE
The maximum number of terminal sessions (serial, telnet and ssh) available.
1.3.6.1.4.1.89.29.17.2INTEGERread-onlycurrent
rlDnsClTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.18
rlMaxDnsClCacheRREntries
OBJECT-TYPE
The current maximal number of DNS client cache entries.
1.3.6.1.4.1.89.29.18.1INTEGERread-onlycurrent
rlMaxDnsClCacheRREntriesAfterReset
OBJECT-TYPE
The future (after reset) maximal number of DNS client cache entries.
1.3.6.1.4.1.89.29.18.2INTEGERread-writecurrent
rlMaxDnsClNCacheErrEntries
OBJECT-TYPE
The current maximal number of DNS client negative cache entries.
1.3.6.1.4.1.89.29.18.3INTEGERread-onlycurrent
rlMaxDnsClNCacheErrEntriesAfterReset
OBJECT-TYPE
The future (after reset) maximal number of DNS client negative cache entries.
1.3.6.1.4.1.89.29.18.4INTEGERread-writecurrent
rlMaxDnsClNamesEntries
OBJECT-TYPE
The current maximal number of DNS client static names entries.
1.3.6.1.4.1.89.29.18.5INTEGERread-onlycurrent
rlMaxDnsClNamesEntriesAfterReset
OBJECT-TYPE
The future (after reset) maximal number of DNS client static names entries.
1.3.6.1.4.1.89.29.18.6INTEGERread-writecurrent
rlTuningParamsTable
OBJECT-TYPE
table to show tuning : limits curent and after reset values.
1.3.6.1.4.1.89.29.19not-accessiblecurrent
rlTuningParamsEntry
OBJECT-TYPE
Defines the contents of each line in the rlTuningParamsTable table.
1.3.6.1.4.1.89.29.19.1not-accessiblecurrent
rlTuningParamsName
OBJECT-TYPE
Index to the rlTuningParamsTable. name of current value Mib for this entry.
1.3.6.1.4.1.89.29.19.1.1DisplayString (SIZE(1..80))read-onlycurrent
rlTuningParamsCurrentValue
OBJECT-TYPE
This variable current value used in this run by the system.
1.3.6.1.4.1.89.29.19.1.2INTEGERread-onlycurrent
rlTuningParamsAfterResetValue
OBJECT-TYPE
This variable value that will be used in next run by the system. i.e. the value will be effective after next reboot
1.3.6.1.4.1.89.29.19.1.3INTEGERread-onlycurrent
rlTuningParamsDefaultValue
OBJECT-TYPE
This variable value that is used by the system as default.
1.3.6.1.4.1.89.29.19.1.4INTEGERread-onlycurrent
rlTuningParamsMinimalValue
OBJECT-TYPE
This variable value indicate minimum value. this is the lower limit for editing the value after reset.
1.3.6.1.4.1.89.29.19.1.5INTEGERread-onlycurrent
rlTuningParamsMaximalValue
OBJECT-TYPE
This variable value indicate maximum value. This is the upper limit for editing the value after reset.
1.3.6.1.4.1.89.29.19.1.6INTEGERread-onlycurrent
rlHostParamTable
OBJECT-TYPE
table to show tuning : limits curent and after reset values.
1.3.6.1.4.1.89.29.20not-accessiblecurrent
rlHostParamEntry
OBJECT-TYPE
Defines the contents of each line in the rlHostParamTable table.
1.3.6.1.4.1.89.29.20.1not-accessiblecurrent
rlHostParamName
OBJECT-TYPE
Index to the rlHostParamTable. name of current value Mib for this entry.
1.3.6.1.4.1.89.29.20.1.1DisplayString (SIZE(1..80))read-onlycurrent
rlHostParamValue
OBJECT-TYPE
This variable indicates the current INTEGER value used in this run by the system. Applicable only if rlHostParamType has 'int' value
1.3.6.1.4.1.89.29.20.1.2INTEGERread-onlycurrent
rlHostParamType
OBJECT-TYPE
This variable indicates the type of this host parameter. int - the value will be appear in the rlHostParamValue instance of this conceptual row. uint - the value will be appear in the rlHostParamUINT instance of this conceptual row. octetString - the value will be appear in the rlHostParamOctetString instance of this conceptual row. ipV4address - the value will be appear in the rlHostParamIpAddress instance of this conceptual row. ipV6address - the value will be appear in the rlHostParamOctetString instance of this conceptual row, to be interpreted as indicated in INET-ADDRESS-MIB. ipV6zAddress - the value will be appear in the rlHostParamOctetString instance of this conceptual row, to be interpreted as indicated in INET-ADDRESS-MIB. inetAddress - the inet address type will be appear in the rlHostParamUINT instance and inet address itself will be appear in the rlHostParamOctetString instance of this conceptual row, to be interpreted as indicated in INET-ADDRESS-MIB. macAddress - the value will be appear in the rlHostParamOctetString instance of this conceptual row, to be interpreted as in SNMPv2-TC. objectIdentifier - the value the value will be appear in the rlHostParamObjectId instance of this conceptual row. displayString - the value will be appear in the rlHostParamOctetString instance of this conceptual row, to be interpreted as in SNMPv2-TC. truthValue - the value will be appear in the rlHostParamUINT instance of this conceptual row, to be interpreted as in SNMPv2-TC. portlist - the value will be appear in the rlHostParamOctetString instance of this conceptual row, to be interpreted as in Q-BRIDGE-MIB.
1.3.6.1.4.1.89.29.20.1.3INTEGER {int(1), uint(2), octetString(3), ipV4address(4), ipV6address(5), ipV6zAddress(6), inetAddress(7), macAddress(8), objectIdentifier(9), displayString(10), truthValue(11), portlist(12)}read-onlycurrent
rlHostParamUINT
OBJECT-TYPE
This variable indicates the current UINT value used in this run by the system. Applicable only if rlHostParamType has 'uint', inetAddress or truthValue value
1.3.6.1.4.1.89.29.20.1.4Unsigned32read-onlycurrent
rlHostParamOctetString
OBJECT-TYPE
This variable indicates the current OCTET STRING value used in this run by the system. Applicable only if rlHostParamType has octetString, ipV6address, ipV6zAddress, inetAddress, macAddress or displayString value
1.3.6.1.4.1.89.29.20.1.5OCTET STRINGread-onlycurrent
rlHostParamIpAddress
OBJECT-TYPE
This variable indicates the current IpAddress value used in this run by the system. Applicable only if rlHostParamType has ipV4address value
1.3.6.1.4.1.89.29.20.1.6IpAddressread-onlycurrent
rlHostParamObjectId
OBJECT-TYPE
This variable indicates the current OBJECT IDENTIFIER value used in this run by the system. Applicable only if rlHostParamType has objectIdentifier value
1.3.6.1.4.1.89.29.20.1.7OBJECT IDENTIFIERread-onlycurrent
rlOspfTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.21
rlMaxOspfInterfaces
OBJECT-TYPE
The current maximum number of ospf interfaces.
1.3.6.1.4.1.89.29.21.1INTEGERread-onlycurrent
rlMaxOspfInterfacesAfterReset
OBJECT-TYPE
The future (after reset) maximum number of ospf interfaces.
1.3.6.1.4.1.89.29.21.2INTEGERread-writecurrent
rlMaxOspfAreas
OBJECT-TYPE
The current maximum number of ospf areas.
1.3.6.1.4.1.89.29.21.3INTEGERread-onlycurrent
rlMaxOspfAreasAfterReset
OBJECT-TYPE
The future (after reset) maximum number of ospf areas.
1.3.6.1.4.1.89.29.21.4INTEGERread-writecurrent
rlMaxOspfNeighbors
OBJECT-TYPE
The current maximum number of ospf neighbors.
1.3.6.1.4.1.89.29.21.5INTEGERread-onlycurrent
rlMaxOspfNeighborsAfterReset
OBJECT-TYPE
The future (after reset) maximum number of ospf neighbors.
1.3.6.1.4.1.89.29.21.6INTEGERread-writecurrent
rlMaxOspfAbrPerArea
OBJECT-TYPE
The current maximum number of ABR in ospf area.
1.3.6.1.4.1.89.29.21.7INTEGERread-onlycurrent
rlMaxOspfAbrPerAreaAfterReset
OBJECT-TYPE
The future (after reset) maximum number of ABR in ospf area.
1.3.6.1.4.1.89.29.21.8INTEGERread-writecurrent
rlMaxOspfNetsInAs
OBJECT-TYPE
The current maximum number of networks in AS.
1.3.6.1.4.1.89.29.21.9INTEGERread-onlycurrent
rlMaxOspfNetsInAsAfterReset
OBJECT-TYPE
The future (after reset) maximum number of networks in AS.
1.3.6.1.4.1.89.29.21.10INTEGERread-writecurrent
rlVlanTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.22
rlVlanDefaultVID
OBJECT-TYPE
The default vlan vid.
1.3.6.1.4.1.89.29.22.1INTEGERread-onlycurrent
rlVlanDefaultVIDAfterReset
OBJECT-TYPE
The default vlan vid after rest
1.3.6.1.4.1.89.29.22.2INTEGERread-writecurrent
rlVlanUsageForbiddenListTable
OBJECT-TYPE
The list of vlan IDs that forbidden for internal usage.
1.3.6.1.4.1.89.29.22.3not-accessiblecurrent
rlVlanUsageForbiddenListEntry
OBJECT-TYPE
Statical created by local or network management VLAN list
1.3.6.1.4.1.89.29.22.3.1not-accessiblecurrent
rlVlanUsageForbiddenListIndex
OBJECT-TYPE
An index is entrie's sequence.
1.3.6.1.4.1.89.29.22.3.1.1INTEGERread-onlycurrent
rlVlanUsageForbiddenList1to1024
OBJECT-TYPE
A list of staticaly created vlans from 1 to 1024.
1.3.6.1.4.1.89.29.22.3.1.2VlanList1read-onlycurrent
rlVlanUsageForbiddenList1025to2048
OBJECT-TYPE
A list of according to the type field created vlans from 1025 to 2048.
1.3.6.1.4.1.89.29.22.3.1.3VlanList2read-onlycurrent
rlVlanUsageForbiddenList2049to3072
OBJECT-TYPE
A list of according to the type field created vlans from 2049 to 3072.
1.3.6.1.4.1.89.29.22.3.1.4VlanList3read-onlycurrent
rlVlanUsageForbiddenList3073to4094
OBJECT-TYPE
A list of according to the type field created vlans from 3073 to 4094.
1.3.6.1.4.1.89.29.22.3.1.5VlanList4read-onlycurrent
rlVlanUsageForbiddenListAfterResetTable
OBJECT-TYPE
The list of vlan IDs that forbidden for internal usage. The configuration applied after the system reset.
1.3.6.1.4.1.89.29.22.4not-accessiblecurrent
rlVlanUsageForbiddenListAfterResetEntry
OBJECT-TYPE
Staticly created by local or network management vlan list
1.3.6.1.4.1.89.29.22.4.1not-accessiblecurrent
rlVlanUsageForbiddenListAfterResetIndex
OBJECT-TYPE
An index is entrie's sequence.
1.3.6.1.4.1.89.29.22.4.1.1INTEGERread-writecurrent
rlVlanUsageForbiddenListAfterReset1to1024
OBJECT-TYPE
A list of staticaly created vlans from 1 to 1024.
1.3.6.1.4.1.89.29.22.4.1.2VlanList1read-writecurrent
rlVlanUsageForbiddenListAfterReset1025to2048
OBJECT-TYPE
A list of according to the type field created vlans from 1025 to 2048.
1.3.6.1.4.1.89.29.22.4.1.3VlanList2read-writecurrent
rlVlanUsageForbiddenListAfterReset2049to3072
OBJECT-TYPE
A list of according to the type field created vlans from 2049 to 3072.
1.3.6.1.4.1.89.29.22.4.1.4VlanList3read-writecurrent
rlVlanUsageForbiddenListAfterReset3073to4094
OBJECT-TYPE
A list of according to the type field created vlans from 3073 to 4094.
1.3.6.1.4.1.89.29.22.4.1.5VlanList4read-writecurrent
rlDependendFeaturesEnableTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.23
rlDependendFeaturesEnabled
OBJECT-TYPE
Current set of running features. These features combinations may limit by A. The same resource (such as ASIC module). B. limitation of product or logic for combination System limit is for up to 5 features First implemented with 3.
1.3.6.1.4.1.89.29.23.1Bits {ipV4routingEnabled(0), policyBasedVlanEnabled(1), qualityOfServiceEnables(2), iscsiEnabled(3)}read-onlycurrent
rlDependendFeaturesEnabledAfterReset
OBJECT-TYPE
Next system load (after reset) set of running features. These features combinations limited by A. The same resource (such as ASIC module). B. Limitation of product or logic for combination (one feature override the other). C. Per product some or all features status may not be changed. System limit is for up to 5 features First implemented with 3.
1.3.6.1.4.1.89.29.23.2Bits {ipV4routingEnabled(0), policyBasedVlanEnabled(1), qualityOfServiceEnables(2), iscsiEnabled(3)}read-writecurrent
rlIpDhcpSnoopingTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.24
rlMaxIpDhcpSnoopingEntries
OBJECT-TYPE
The current maximum number of DHCP snooping entries.
1.3.6.1.4.1.89.29.24.1INTEGERread-onlycurrent
rlMaxIpDhcpSnoopingEntriesAfterReset
OBJECT-TYPE
The future (after reset) maximum number of DHCP snooping entries.
1.3.6.1.4.1.89.29.24.2INTEGERread-writecurrent
rlIscsiSnoopTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.25
rlIscsiSnoopMaxNumOfConnections
OBJECT-TYPE
Defines the presetly effective upper limit of iSCSI connections number the device guarantees to support
1.3.6.1.4.1.89.29.25.1INTEGERread-onlycurrent
rlIscsiSnoopMaxNumOfConnectionsAfterReset
OBJECT-TYPE
Defines the upper limit of iSCSI connections number the device will have to support following the looming System reset
1.3.6.1.4.1.89.29.25.2INTEGERread-writecurrent
rlDhcpServerTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.26
rlDhcpSrvMaxAllocatedAddresses
OBJECT-TYPE
Defines the maximal number of allocated addresses by DHCP server
1.3.6.1.4.1.89.29.26.1INTEGERread-onlycurrent
rlDhcpSrvMaxAllocatedAddressesAfterReset
OBJECT-TYPE
Defines the maximal number of allocated addresses by DHCP server activated after reset
1.3.6.1.4.1.89.29.26.2INTEGERread-writecurrent
rlBrgMacHashChainLen
OBJECT-TYPE
Current depth of the MAC address hashing Table
1.3.6.1.4.1.89.29.27INTEGERread-onlycurrent
rlBrgMacHashChainLenAfterReset
OBJECT-TYPE
Defines the depth in step of 4, of the MAC address hashing Table after reset. The mac chain length is the scalar value multiplied by 4.
1.3.6.1.4.1.89.29.28INTEGER (1..65535)read-writecurrent
rlBrgMacHashFunction
OBJECT-TYPE
Current depth of the MAC address hashing Table
1.3.6.1.4.1.89.29.29INTEGER {macSqnVlanSqn(0), macRndVlanSqn(1), macSqnVlanRnd(2), macRndVlanRnd(3)}read-onlycurrent
rlBrgMacHashFunctionAfterReset
OBJECT-TYPE
Defines hash function vlan random mac random vlan sequntial mac sequential vlan sequential mac random vlan random mac sequntial
1.3.6.1.4.1.89.29.30INTEGER {macSqnVlanSqn(0), macRndVlanSqn(1), macSqnVlanRnd(2), macRndVlanRnd(3)}read-writecurrent