MIBs Depot

Dell-QOS-CLI-MIB

Registered at
1.3.6.1.4.1.89.88
Last updated
2006-04-04 00:00
Organization
Dell
Revisions
2006-02-12 00:00, 2006-02-12 00:00, 2005-03-14 00:00, 2005-02-07 00:00, 2005-01-27 00:00, 2004-11-15 00:00, 2003-09-29 00:00, 2003-09-21 00:00, 2005-04-17 00:00
Namespace
dell
Source file
Dell-QOS-CLI-MIB
Digest
sha256:662c8551eb036387ddee60c068b4d701f9ee09f605085ec31eef83955f21fbfa

Description

Added: StatisticsCntrNumOfBitsType StatisticsCntrType rlQosStatistics rlQosPortPolicyStatisticsTable rlQosSinglePolicerStatisticsTable rlQosAggregatePolicerStatisticsTable rlQosOutQueueStatisticsTable rlQosGlobalStatisticsCntrsTable.

Contact

www.dell.com

Imports

FromSymbols
Dell-BRIDGEMIBOBJECTS-MIBVlanList1, VlanList2, VlanList3, VlanList4
Dell-MIBPercents, rnd
Dell-POLICY-MIBStatisticsClearActionType, StatisticsDPType
IF-MIBInterfaceIndex, InterfaceIndexOrZero
Q-BRIDGE-MIBPortList, VlanId
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Counter64, Gauge32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, RowPointer, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
CISCOSB-MIB
DIFF-SERV-MIB
Dell-BRIDGEMIBOBJECTS-MIB
Dell-MIB
Dell-POLICY-MIB
Dell-QOS-CLI-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
P-BRIDGE-MIB
Q-BRIDGE-MIB
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
TOKEN-RING-RMON-MIB

Textual conventions

NameOIDSyntaxAccessStatus
AceActionType
TEXTUAL-CONVENTION
Specifies one of 4 ACE Actions: 1- Permit- permit to the traffic that define by the parameters. 2- Deny- deny the traffic that define by the parameter. 3- Deny-DisablePort deny the traffic that defined by the parameters and disable the port. 4- Deny-LogInput deny the traffic that defined by the parameters and log incoming traffic. 5- Permit-LogInput permit the traffic that defined by the parameters and log incoming traffic.
current
AceObjectType
TEXTUAL-CONVENTION
Specifies one of 13 ACE types: 1- IP ACE. 2- IP-TCP ACE. 3- IP-UDP ACE. 4- IP-offset ACE. 5- MAC ACE. 6- MAC-offset ACE. 7- IP-ICMP ACE. 8- IP-IGMP ACE. 9- IPv6 ACE. 10- IPv6-TCP ACE. 11- IPv6-UDP ACE. 12- IPv6-offset ACE. 13- IPv6-ICMP ACE.
current
AclDefaultAction
TEXTUAL-CONVENTION
Default action when the ACL reach end point.
current
AclObjectType
TEXTUAL-CONVENTION
Specifies one of 3 ACL types: 1- MAC ACL. 2- IPv4 ACL. 3- IPv6 ACL.
current
BinaryStatus
TEXTUAL-CONVENTION
Specifies Disable or enable.
current
ClassMapAction
TEXTUAL-CONVENTION
Specifies one of 8 Class-map actios: 1- none - action not specified - use default action. 2 -Mark IP-Precedence. 3- Mark DSCP. 4- Set Egress queue 5- Mark VPT 6- Choose queue by global trust mode.
current
ClassMapType
TEXTUAL-CONVENTION
Specifies one of 2 Class-map types: 1- Match all. logical and between all statements. 2- Match any. logical or between all statements.
current
ClassOffsetType
TEXTUAL-CONVENTION
Specifies one of 6 offset types: 1- Absolute-start of the packet. 2- Layer 2-start of MAC header. 3- MPLS-start of MPLS header. 4- Layer 3-start of layer 3 header. 5- Layer 4-start of layer 4 header. 6- Layer 5-after TCP/UDP header. 7- VLAN. 8- input device port. 9- input device port. 10-VPT. 11-EtherType. 12-innerVlan. 13-Layer 3 IPv6 - start of layer 3 IPv6 header
current
ClassTupleType
TEXTUAL-CONVENTION
Specifies one of Tuple types
current
InterfaceType
TEXTUAL-CONVENTION
Interface type.
current
MarkVlanAction
TEXTUAL-CONVENTION
Specifies the mark vlan action type in the class map table. 1 - noMark - No vlan marking 2 - mark - mark vlan tagged. 3 - markNestedVlan - add vlan tag to the packet.
current
PolicerAction
TEXTUAL-CONVENTION
Specifies one of 4 Policer Action: 1- No Action 2- Drop out of profile packets. 3- Remark out of profile packets. 4- Remark to explicit value out of profile packets 5- this policer is part of cascade chain
current
PolicerType
TEXTUAL-CONVENTION
Specifies one of 3 Policer types: 1- Single policer only per one class map. 2- Aggregate policer can be applied to several class maps. 3- Cascade policer.
current
QosGlobalMode
TEXTUAL-CONVENTION
Specifies one of 3 QoS mode: 1- disable no QoS on the system 2- Basic Qos mode only trust mode with ACL are enabled. 3- Advance mode all Qos option are enabled. 4- Service Mode -v750 DEPEREACTED!!! all Qos option are enabled only in service mode configuration
current
QosTrustMode
TEXTUAL-CONVENTION
Specifies one of 6 QoS trust mode: - none.- v750 DEPRECATED - same as globalMode = disable. means that only ACL can be applied. - 802.1p. queue is set by the VPT field. - DSCP. queue is set by the DSCP field - v750 deprecated. replaced with new scalar rlQosDscpMutationEnable . DSCP-Mutation. the DSCP mutate in the ingress and then the queue is set by the DSCP - tcp/udp.- v750 - DEPRECATED - not supported. the queue is set by the l4 port number. - cos-dscp. Queue is set for l2 traffic by VPT field and for l3 traffic by DSCP field.
current
QueueType
TEXTUAL-CONVENTION
Queue type Ef or WRR.
current
RedirectAction
TEXTUAL-CONVENTION
Specifies the packet redirection options. Redirection is applied only on permitted packets. 1 - disabled - no redirect 2 - trap - trap to local_host (CPU) 3 - redirectToInterface - redirect to a output interface (port, trunk or vlan) 4 - redirectToAllPorts - redirect to all ports, except the ingress port. 5 - mirror - forward the packet and sent a copy to local_host (CPU) 6 - analyzerPort - forward the packet and sent a copy to egress port. 7 - loopback - redirect the packet the the port it was received. 8 - redirectToPortGroup - send to group of ports, defined in rlUserAssignedVidxTable table 9 - mirror_and_redirectToInterface - send the packet to interface and send a copy to local_host(CPU) 10 -mirror_and_redirectToInterfacesGroup - send the packet to group of ports and send a copy to local_host(CPU)
current
RlQosAceTidxActionDropType
TEXTUAL-CONVENTION
The Action Drop Type.
current
RlQosApplicationDefaultActionType
TEXTUAL-CONVENTION
Application default actions.
current
RlQosTimeBasedAclWeekPeriodicList
TEXTUAL-CONVENTION
Bitmap that includes days of week. Each bit in the bitmap associated with corresponding day of the week.
current
StatisticsCntrNumOfBitsType
TEXTUAL-CONVENTION
The counter can be of different sizes - 32 bit, 48 bit, 64 bit. Maximum is 64.
current
StatisticsCntrType
TEXTUAL-CONVENTION
The counter can be of different types, depends on actions adhered to rules that the counter is working on.
current

Objects

NameOIDSyntaxAccessStatus
rlQosCliQosMode
OBJECT-TYPE
*********This Scalar is deprecated - rlQosGlobalCfgEntry - replaces its functionality*************** This scalar define in which mode the system will work: basic , advance or none.
1.3.6.1.4.1.89.88.1QosGlobalModeread-writedeprecated
rlQosCliBasicModeCfg
OBJECT-TYPE
*********This Scalar is deprecated - rlQosGlobalCfgEntry - replaces its functionality*************** This scalar define in which trust mode the system will work:802.1p or DSCP or DSCP-Mutation or TCP/UDP or none or vpt-dscp.
1.3.6.1.4.1.89.88.2QosTrustModeread-writedeprecated
rlQosMaxNumOfAce
OBJECT-TYPE
This scalar define the max number of aces.
1.3.6.1.4.1.89.88.3INTEGERread-onlycurrent
rlQosOffsetTable
OBJECT-TYPE
This table specifies Offset Table information
1.3.6.1.4.1.89.88.4not-accessibledeprecated
rlQosOffsetEntry
OBJECT-TYPE
Each entry in this table describes one classifier field. The information includes: Offset Type the offset the mask and the Pattern. if the type is vlan then the value will be the vlan tag. if the Type is in/out port it will be the device in/out port. The index is sequential integer represent by rlQosOffsetIndex
1.3.6.1.4.1.89.88.4.1not-accessibledeprecated
rlQosOffsetIndex
OBJECT-TYPE
An arbitrary incremental Index for the offset table.
1.3.6.1.4.1.89.88.4.1.1INTEGERnot-accessibledeprecated
rlQosOffsetType
OBJECT-TYPE
Start of the offset.
1.3.6.1.4.1.89.88.4.1.2ClassOffsetTyperead-createdeprecated
rlQosOffsetValue
OBJECT-TYPE
The Offset value.
1.3.6.1.4.1.89.88.4.1.3INTEGERread-createdeprecated
rlQosOffsetMask
OBJECT-TYPE
Define which bit to be extracted from the offset.
1.3.6.1.4.1.89.88.4.1.4INTEGER (0..255)read-createdeprecated
rlQosOffsetPattern
OBJECT-TYPE
The value to match too.
1.3.6.1.4.1.89.88.4.1.5INTEGER (0..255)read-createdeprecated
rlQosOffsetTuplePointer
OBJECT-TYPE
Pointer for the relevant Tuple.
1.3.6.1.4.1.89.88.4.1.6INTEGERread-createdeprecated
rlQosOffsetStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.4.1.7RowStatusread-createdeprecated
rlQosTupleTable
OBJECT-TYPE
This table specifies Tuple Table information
1.3.6.1.4.1.89.88.5not-accessiblecurrent
rlQosTupleEntry
OBJECT-TYPE
Each entry in this table describes one Tuple. The information includes: Tuple Type and the Tuples values. The index is sequential integer represent by rlQosTupleIndex
1.3.6.1.4.1.89.88.5.1not-accessiblecurrent
rlQosTupleIndex
OBJECT-TYPE
An arbitrary incremental Index for the offset table.
1.3.6.1.4.1.89.88.5.1.1INTEGERnot-accessiblecurrent
rlQosTupleType
OBJECT-TYPE
Start of the offset.
1.3.6.1.4.1.89.88.5.1.2ClassTupleTyperead-createcurrent
rlQosTupleValue1
OBJECT-TYPE
The Tuple no.1 value can be regular integer values only.
1.3.6.1.4.1.89.88.5.1.3INTEGERread-createcurrent
rlQosTupleValue2
OBJECT-TYPE
The Tuple no.2 value can be IPv4/IPv6/MAC address or protocol number with mask
1.3.6.1.4.1.89.88.5.1.4OCTET STRING (SIZE(0..32))read-createcurrent
rlQosTupleStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.5.1.5RowStatusread-createcurrent
rlQosAceTable
OBJECT-TYPE
This table specifies ACE table information
1.3.6.1.4.1.89.88.6not-accessiblecurrent
rlQosAceEntry
OBJECT-TYPE
Each entry in this table describes one Classifier Element. The information includes: Action the ACE's Type the up to 8 tuples pointers. The index is sequential integer represent by rlQosAceIndex
1.3.6.1.4.1.89.88.6.1not-accessiblecurrent
rlQosAceIndex
OBJECT-TYPE
An arbitrary incremental Index for the ACE table.
1.3.6.1.4.1.89.88.6.1.1INTEGERnot-accessiblecurrent
rlQosAceAction
OBJECT-TYPE
ACE Action to take.
1.3.6.1.4.1.89.88.6.1.2AceActionTyperead-createcurrent
rlQosAceType
OBJECT-TYPE
ACE Type
1.3.6.1.4.1.89.88.6.1.3AceObjectTyperead-createcurrent
rlQosAceTuple1
OBJECT-TYPE
ACE Tuple 1 pointer.
1.3.6.1.4.1.89.88.6.1.4INTEGERread-createcurrent
rlQosAceTuple2
OBJECT-TYPE
ACE Tuple 1 pointer.
1.3.6.1.4.1.89.88.6.1.5INTEGERread-createcurrent
rlQosAceTuple3
OBJECT-TYPE
ACE Tuple 1 pointer.
1.3.6.1.4.1.89.88.6.1.6INTEGERread-createcurrent
rlQosAceTuple4
OBJECT-TYPE
ACE Tuple 1 pointer.
1.3.6.1.4.1.89.88.6.1.7INTEGERread-createcurrent
rlQosAceTuple5
OBJECT-TYPE
ACE Tuple 1 pointer.
1.3.6.1.4.1.89.88.6.1.8INTEGERread-createcurrent
rlQosAceTuple6
OBJECT-TYPE
ACE Tuple 1 pointer.
1.3.6.1.4.1.89.88.6.1.9INTEGERread-createcurrent
rlQosAceTuple7
OBJECT-TYPE
ACE Tuple 1 pointer.
1.3.6.1.4.1.89.88.6.1.10INTEGERread-createcurrent
rlQosAceTuple8
OBJECT-TYPE
ACE Tuple 1 pointer.
1.3.6.1.4.1.89.88.6.1.11INTEGERread-createcurrent
rlQosAceAccount
OBJECT-TYPE
ACE Accounting state. When set to 'enabled' than appropriate statistic's counter is provided for an ACE.
1.3.6.1.4.1.89.88.6.1.12BinaryStatusread-createcurrent
rlQosAceStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.6.1.13RowStatusread-createcurrent
rlQosAclTable
OBJECT-TYPE
This table specifies ACL table information
1.3.6.1.4.1.89.88.7not-accessiblecurrent
rlQosAclEntry
OBJECT-TYPE
Each entry in this table describes one Classifier Element. The information includes: Action and the row status. The ACE pointer are in the ACL-ACE reference table. The index is sequential integer represent by rlQosAceIndex
1.3.6.1.4.1.89.88.7.1not-accessiblecurrent
rlQosAclIndex
OBJECT-TYPE
An arbitrary incremental Index for the ACE table.
1.3.6.1.4.1.89.88.7.1.1INTEGERnot-accessiblecurrent
rlQosAclName
OBJECT-TYPE
Name ACL.
1.3.6.1.4.1.89.88.7.1.2DisplayString (SIZE(0..32))read-createcurrent
rlQosAclType
OBJECT-TYPE
ACL Type.
1.3.6.1.4.1.89.88.7.1.3AclObjectTyperead-createcurrent
rlQosAclStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.7.1.4RowStatusread-createcurrent
rlQosAclNumOfAces
OBJECT-TYPE
Holds number of aces in the acl.
1.3.6.1.4.1.89.88.7.1.5INTEGERread-onlycurrent
rlQosAclAceRefTable
OBJECT-TYPE
This table specifies the ACE to ACL relationship.
1.3.6.1.4.1.89.88.8not-accessiblecurrent
rlQosAclAceRefEntry
OBJECT-TYPE
Each entry in this table describes the relationship between ACE to ACL. Show which ACE include in one ACL. The index is the ACE pointer represent by rlQosAclAceRefAcePointer
1.3.6.1.4.1.89.88.8.1not-accessiblecurrent
rlQosAclAceRefAcePointer
OBJECT-TYPE
The Index is the ACE pointer
1.3.6.1.4.1.89.88.8.1.1INTEGERnot-accessiblecurrent
rlQosAclAceRefAclPointer
OBJECT-TYPE
ACL index Pointer
1.3.6.1.4.1.89.88.8.1.2INTEGERread-createcurrent
rlQosAclAceRefStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.8.1.3RowStatusread-createcurrent
rlQosClassMapTable
OBJECT-TYPE
This table specifies CCL table information
1.3.6.1.4.1.89.88.9not-accessiblecurrent
rlQosClassMapEntry
OBJECT-TYPE
Each entry in this table describes one Class Map Element. The information includes: Classes Name,Class Action, Policer pointer, and 1 match statements. The index is sequential integer represent by rlQosClassMapIndex
1.3.6.1.4.1.89.88.9.1not-accessiblecurrent
rlQosClassMapIndex
OBJECT-TYPE
Class Map Index
1.3.6.1.4.1.89.88.9.1.1INTEGERnot-accessiblecurrent
rlQosClassMapName
OBJECT-TYPE
Name of the Class Map.
1.3.6.1.4.1.89.88.9.1.2DisplayString (SIZE(0..32))read-createcurrent
rlQosClassMapType
OBJECT-TYPE
Class map type
1.3.6.1.4.1.89.88.9.1.3ClassMapTyperead-createcurrent
rlQosClassMapAction
OBJECT-TYPE
Class Map Action.
1.3.6.1.4.1.89.88.9.1.4ClassMapActionread-createcurrent
rlQosClassMapMarkValue
OBJECT-TYPE
Mark value when mark action has been chosen in Class Map Action field.
1.3.6.1.4.1.89.88.9.1.5INTEGERread-createcurrent
rlQosClassMapPolicer
OBJECT-TYPE
Policer pointer. 0-means no policer.
1.3.6.1.4.1.89.88.9.1.6INTEGERread-createcurrent
rlQosClassMapMatch1
OBJECT-TYPE
Match ACL 1 pointer.
1.3.6.1.4.1.89.88.9.1.7INTEGERread-createcurrent
rlQosClassMapMatch2
OBJECT-TYPE
Match ACL 2 pointer.
1.3.6.1.4.1.89.88.9.1.8INTEGERread-createcurrent
rlQosClassMapMarkVlan
OBJECT-TYPE
If 'mark', than the classified traffic will be remarked with new VLAN id. If 'disabled' VLAN id is not changed. If markNestedVlan, if the egress interface defined as VLAN tagged member then a new VLAN tag is added to the packet.
1.3.6.1.4.1.89.88.9.1.9MarkVlanActionread-createcurrent
rlQosClassMapNewVlan
OBJECT-TYPE
If rlQosClassMapMarkVlan is not 'noMark', than the classified traffic will be remarked with new VLAN id. The value of this field sets new VLAN id.
1.3.6.1.4.1.89.88.9.1.10INTEGER (0..4095)read-createcurrent
rlQosClassMapRedirectAction
OBJECT-TYPE
Specifiy the redirection action.
1.3.6.1.4.1.89.88.9.1.11RedirectActionread-createcurrent
rlQosClassMapDestInterface
OBJECT-TYPE
Relevant if rlQosClassMapRedirect is either 'redirectToInterface' or 'analyzerPort' or 'toMultipleInterfaces'. Specified the output interface the packet is redireted to or the port that gets copy of the packet in addition to the port it was forwarded.
1.3.6.1.4.1.89.88.9.1.12INTEGERread-createcurrent
rlQosClassMapStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.9.1.13RowStatusread-createcurrent
rlQosClassMapMatch3
OBJECT-TYPE
Match ACL 3 pointer.
1.3.6.1.4.1.89.88.9.1.14INTEGERread-createcurrent
rlQosClassMapTrapId
OBJECT-TYPE
If now zero, Indicates the trap type id the matched packets arrives with, relevant when RedirectAction is trap or mirror.
1.3.6.1.4.1.89.88.9.1.15INTEGERread-createcurrent
rlQosClassMapCounterEnable
OBJECT-TYPE
Enable/disable counting per class map. Counts packets matche the class map rules.
1.3.6.1.4.1.89.88.9.1.16TruthValueread-createcurrent
rlQosClassMapTunnelIdx
OBJECT-TYPE
If not zero, then the tunnel data pointed by rlQosClassMapTunnelIdx is added to the packet
1.3.6.1.4.1.89.88.9.1.17Unsigned32read-createcurrent
rlQosPolicerTable
OBJECT-TYPE
This table specifies All the Policers in the system Information
1.3.6.1.4.1.89.88.10not-accessiblecurrent
rlQosPolicerEntry
OBJECT-TYPE
Each entry in this table describes one policer. The information includes: Policer name, Policer type, Committed Rate, Committed Burst, Out-of-Profile Action. The index is sequential integer represent by rlQosPolicerIndex
1.3.6.1.4.1.89.88.10.1not-accessiblecurrent
rlQosPolicerIndex
OBJECT-TYPE
Policer Index.
1.3.6.1.4.1.89.88.10.1.1INTEGERnot-accessiblecurrent
rlQosPolicerName
OBJECT-TYPE
Name of the Policer.
1.3.6.1.4.1.89.88.10.1.2DisplayString (SIZE(0..32))read-createcurrent
rlQosPolicerType
OBJECT-TYPE
Policer type
1.3.6.1.4.1.89.88.10.1.3PolicerTyperead-createcurrent
rlQosPolicerCir
OBJECT-TYPE
Committed rate value.
1.3.6.1.4.1.89.88.10.1.4Unsigned32read-createcurrent
rlQosPolicerCbs
OBJECT-TYPE
Committed rate Value.
1.3.6.1.4.1.89.88.10.1.5Unsigned32read-createcurrent
rlQosPolicerAction
OBJECT-TYPE
Out of profile Action.
1.3.6.1.4.1.89.88.10.1.6PolicerActionread-createcurrent
rlQosPolicerCasPointerRemVal
OBJECT-TYPE
Pointer to use whan the type is cascade policer. 0-means no cascade policer. It can also be Remark value in case of explicit remark
1.3.6.1.4.1.89.88.10.1.7INTEGERread-createcurrent
rlQosPolicerStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.10.1.8RowStatusread-createcurrent
rlQosPolicyMapTable
OBJECT-TYPE
This table specifies Policy Map Table Information
1.3.6.1.4.1.89.88.11not-accessiblecurrent
rlQosPolicyMapEntry
OBJECT-TYPE
Each entry in this table describes one policy map. The information includes: Index, Policy Map name, Up to 6 class map names. The index is sequential integer represent by rlQosPolicerIndex
1.3.6.1.4.1.89.88.11.1not-accessiblecurrent
rlQosPolicyMapIndex
OBJECT-TYPE
Policy map Index.
1.3.6.1.4.1.89.88.11.1.1INTEGERnot-accessiblecurrent
rlQosPolicyMapName
OBJECT-TYPE
Policy map Name.
1.3.6.1.4.1.89.88.11.1.2DisplayString (SIZE(0..32))read-createcurrent
rlQosPolicyMapStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.11.1.3RowStatusread-createcurrent
rlQosPolicyClassRefTable
OBJECT-TYPE
This table specifies The relationship between policy map to class map
1.3.6.1.4.1.89.88.12not-accessiblecurrent
rlQosPolicyClassRefEntry
OBJECT-TYPE
Each entry in this table describes the connection between class-map entry to policy map by using pointers. The index is Class map pointer represent by rlQosPolicyClassRefClassPointer
1.3.6.1.4.1.89.88.12.1not-accessiblecurrent
rlQosPolicyClassRefClassPointer
OBJECT-TYPE
The Index is the Class-map pointer
1.3.6.1.4.1.89.88.12.1.1INTEGERnot-accessiblecurrent
rlQosPolicyClassRefPolicyPointer
OBJECT-TYPE
Policy map index Pointer
1.3.6.1.4.1.89.88.12.1.2INTEGERread-createcurrent
rlQosPolicyClassRefStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.12.1.3RowStatusread-createcurrent
rlQosIfPolicyTable
OBJECT-TYPE
This table specifies for each interface the Policy Map attach to it
1.3.6.1.4.1.89.88.13not-accessiblecurrent
rlQosIfPolicyEntry
OBJECT-TYPE
Each entry in this table describes what policy Map attached to specific Interface. The index is Interface Index represent by rlIfIndex and the interface type represent by rlIfType
1.3.6.1.4.1.89.88.13.1not-accessiblecurrent
rlIfIndex
OBJECT-TYPE
Interface Index.
1.3.6.1.4.1.89.88.13.1.1INTEGERnot-accessiblecurrent
rlIfType
OBJECT-TYPE
Interface Type(vlan/port).
1.3.6.1.4.1.89.88.13.1.2InterfaceTypenot-accessiblecurrent
rlQosIfPolicyMapPointerIn
OBJECT-TYPE
Policy map pointer Input.
1.3.6.1.4.1.89.88.13.1.3INTEGERread-createcurrent
rlQosIfPolicyMapPointerOut
OBJECT-TYPE
Policy map pointer Output.
1.3.6.1.4.1.89.88.13.1.4INTEGERread-createcurrent
rlQosIfTrustActive
OBJECT-TYPE
Interface Basic Mode Trust is active or not .
1.3.6.1.4.1.89.88.13.1.5BinaryStatusread-createcurrent
rlQosPortShaperStatus
OBJECT-TYPE
If there is shaper on the port
1.3.6.1.4.1.89.88.13.1.6BinaryStatusread-createcurrent
rlQosCirPortShaper
OBJECT-TYPE
The CIR for the port shaper. N/A when the shper is disabled
1.3.6.1.4.1.89.88.13.1.7INTEGERread-createcurrent
rlQosCbsPortShaper
OBJECT-TYPE
The CBS for the port shaper. N/A when the shper is disabled
1.3.6.1.4.1.89.88.13.1.8INTEGERread-createcurrent
rlQosIfProfilePointer
OBJECT-TYPE
Interface Profile name pointer.
1.3.6.1.4.1.89.88.13.1.9DisplayString (SIZE(0..32))read-createcurrent
rlQosQueueProfilePointer
OBJECT-TYPE
Queue Profile name pointer.
1.3.6.1.4.1.89.88.13.1.10DisplayString (SIZE(0..32))read-createcurrent
rlQosQueueShapeProfilePointer
OBJECT-TYPE
Queue shape Profile pointer.
1.3.6.1.4.1.89.88.13.1.11INTEGERread-createcurrent
rlQosAclDefaultAction
OBJECT-TYPE
When one ACL is enterd then what to do for the last rull.
1.3.6.1.4.1.89.88.13.1.12AclDefaultActionread-createcurrent
rlQosIfPolicyMapStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.13.1.13RowStatusread-createcurrent
rlQosIfAclIn
OBJECT-TYPE
Index of an ACL in the rlQosAclTable, which is applied to the ingress of an interface. 0 - means no ACL applied.
1.3.6.1.4.1.89.88.13.1.14INTEGERread-createcurrent
rlQosIfAclOut
OBJECT-TYPE
Index of an ACL in the rlQosAclTable, which is applied to the egress of an interface. 0 - means no ACL applied.
1.3.6.1.4.1.89.88.13.1.15INTEGERread-createcurrent
rlQosIfPolicerIn
OBJECT-TYPE
Index of an Policer in the rlQosPolicerTable, which is applied to the ingress of an interface. 0 - means no Policer applied.
1.3.6.1.4.1.89.88.13.1.16INTEGERread-createcurrent
rlQosPortRateLimitStatus
OBJECT-TYPE
If there is Rate limit on the port
1.3.6.1.4.1.89.88.13.1.17BinaryStatusread-createcurrent
rlQosCirPortRateLimit
OBJECT-TYPE
The CIR for the port rate limit. N/A when the Rate limit is disabled
1.3.6.1.4.1.89.88.13.1.18INTEGERread-createcurrent
rlQosCbsPortRateLimit
OBJECT-TYPE
The CBS for the port Rate limit. N/A when the Rate limit is disabled
1.3.6.1.4.1.89.88.13.1.19INTEGERread-createcurrent
rlQosIfIpv6AclIn
OBJECT-TYPE
Index of an IPv6 ACL in the rlQosAclTable, which is applied to the ingress of an interface. 0 - means no ACL applied.
1.3.6.1.4.1.89.88.13.1.20INTEGERread-createcurrent
rlQosIfIpv6AclOut
OBJECT-TYPE
Index of an IPv6 ACL in the rlQosAclTable, which is applied to the egress of an interface. 0 - means no ACL applied.
1.3.6.1.4.1.89.88.13.1.21INTEGERread-createcurrent
rlQosIfProfileCfgTable
OBJECT-TYPE
This table specifies for each Queue the Tail Drop or WRED parameters and the EF of WRR parameters.
1.3.6.1.4.1.89.88.14not-accessiblecurrent
rlQosIfProfileCfgEntry
OBJECT-TYPE
Each entry in this table describes one queue parameters: Tail-drop threshold for drop precedence 0,1,3 and the WRED min-max threshold and the probability factor for Drop precedence 0,1,2 and the WRED Q factor and the EF priority and the WRR weight. The index is Interface Index represent by rlIfProfileName and queue-id represent by rlQosQueueId
1.3.6.1.4.1.89.88.14.1not-accessiblecurrent
rlIfProfileName
OBJECT-TYPE
Interface Index.
1.3.6.1.4.1.89.88.14.1.1DisplayString (SIZE(0..32))not-accessiblecurrent
rlQosQueueId
OBJECT-TYPE
Queue id Index.
1.3.6.1.4.1.89.88.14.1.2INTEGER (1..8)not-accessiblecurrent
rlQosTdThersholdDp0
OBJECT-TYPE
Tail Drop Threshold for Drop Precedence 0.
1.3.6.1.4.1.89.88.14.1.3INTEGER (0..100)read-createcurrent
rlQosTdThersholdDp1
OBJECT-TYPE
Tail Drop Threshold for Drop Precedence 1.
1.3.6.1.4.1.89.88.14.1.4INTEGER (0..100)read-createcurrent
rlQosTdThersholdDp2
OBJECT-TYPE
Tail Drop Threshold for Drop Precedence 2.
1.3.6.1.4.1.89.88.14.1.5INTEGER (0..100)read-createcurrent
rlQosRedMinDp0
OBJECT-TYPE
WRED Min Threshold for Drop Precedence 2.
1.3.6.1.4.1.89.88.14.1.6INTEGER (0..100)read-createcurrent
rlQosRedMaxDp0
OBJECT-TYPE
WRED Max Threshold for Drop Precedence 0.
1.3.6.1.4.1.89.88.14.1.7INTEGER (0..100)read-createcurrent
rlQosRedProbDp0
OBJECT-TYPE
WRED probability for Drop Precedence 0.
1.3.6.1.4.1.89.88.14.1.8INTEGERread-createcurrent
rlQosRedMinDp1
OBJECT-TYPE
WRED Min Threshold for Drop Precedence 2.
1.3.6.1.4.1.89.88.14.1.9INTEGER (0..100)read-createcurrent
rlQosRedMaxDp1
OBJECT-TYPE
WRED Max Threshold for Drop Precedence 1.
1.3.6.1.4.1.89.88.14.1.10INTEGER (0..100)read-createcurrent
rlQosRedProbDp1
OBJECT-TYPE
WRED probability for Drop Precedence 1.
1.3.6.1.4.1.89.88.14.1.11INTEGERread-createcurrent
rlQosRedMinDp2
OBJECT-TYPE
WRED Min Threshold for Drop Precedence 2.
1.3.6.1.4.1.89.88.14.1.12INTEGER (0..100)read-createcurrent
rlQosRedMaxDp2
OBJECT-TYPE
WRED Max Threshold for Drop Precedence 2.
1.3.6.1.4.1.89.88.14.1.13INTEGER (0..100)read-createcurrent
rlQosRedProbDp2
OBJECT-TYPE
WRED probability for Drop Precedence 2.
1.3.6.1.4.1.89.88.14.1.14INTEGERread-createcurrent
rlQosRedQweight
OBJECT-TYPE
Q factor for WRED.
1.3.6.1.4.1.89.88.14.1.15INTEGERread-createcurrent
rlQosIfprofileStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.14.1.16RowStatusread-createcurrent
rlQosDscpMutationTable
OBJECT-TYPE
This table specifies The DSCP Mutation table
1.3.6.1.4.1.89.88.15not-accessiblecurrent
rlQosDscpMutationEntry
OBJECT-TYPE
Each entry in this table describes the new DSCP for the packet. The index is Old DSCP represent by rlQosOldDscp
1.3.6.1.4.1.89.88.15.1not-accessiblecurrent
rlQosOldDscp
OBJECT-TYPE
Old DSCP.
1.3.6.1.4.1.89.88.15.1.1INTEGER (0..63)not-accessiblecurrent
rlQosNewDscp
OBJECT-TYPE
New DSCP.
1.3.6.1.4.1.89.88.15.1.2INTEGER (0..63)read-createcurrent
rlQosDscpRemarkTable
OBJECT-TYPE
This table specifies The DSCP Remark table
1.3.6.1.4.1.89.88.16not-accessiblecurrent
rlQosDscpRemarkEntry
OBJECT-TYPE
Each entry in this table describes the new DSCP for the packet. The index is Old DSCP represent by rlQosOldDscp
1.3.6.1.4.1.89.88.16.1not-accessiblecurrent
rlQosRmOldDscp
OBJECT-TYPE
Old DSCP.
1.3.6.1.4.1.89.88.16.1.1INTEGER (0..63)not-accessiblecurrent
rlQosRmNewDscp
OBJECT-TYPE
New DSCP.
1.3.6.1.4.1.89.88.16.1.2INTEGER (0..63)read-createcurrent
rlQosCosQueueTable
OBJECT-TYPE
This table specifies The Cos to queue map table
1.3.6.1.4.1.89.88.17not-accessiblecurrent
rlQosCosQueueEntry
OBJECT-TYPE
Each entry in this table describes queue ID. The index is CoS represent by rlQosCosIndex
1.3.6.1.4.1.89.88.17.1not-accessiblecurrent
rlQosCosIndex
OBJECT-TYPE
CoS value (0-7).
1.3.6.1.4.1.89.88.17.1.1INTEGER (0..7)not-accessiblecurrent
rlQosCosQueueId
OBJECT-TYPE
Queue ID.
1.3.6.1.4.1.89.88.17.1.2INTEGER (1..8)read-createcurrent
rlQosDscpQueueTable
OBJECT-TYPE
This table specifies The DSCP to Queue map table
1.3.6.1.4.1.89.88.18not-accessiblecurrent
rlQosDscpQueueEntry
OBJECT-TYPE
Each entry in this table describes The Queue Number. The index is DSCP represent by rlQosDscpIndex
1.3.6.1.4.1.89.88.18.1not-accessiblecurrent
rlQosDscpIndex
OBJECT-TYPE
DSCP value.
1.3.6.1.4.1.89.88.18.1.1INTEGER (0..63)not-accessiblecurrent
rlQosQueueNum
OBJECT-TYPE
Queue Number.
1.3.6.1.4.1.89.88.18.1.2INTEGER (1..8)read-createcurrent
rlQosTcpPortQueueTable
OBJECT-TYPE
This table specifies TCP Port to Queue map table
1.3.6.1.4.1.89.88.19not-accessiblecurrent
rlQosTcpPortQueueEntry
OBJECT-TYPE
Each entry in this table describes The Queue Number. The index is TCP/UDP port represent by rlQosTcpUdpPort
1.3.6.1.4.1.89.88.19.1not-accessiblecurrent
rlQosTcpPort
OBJECT-TYPE
TCP port number.
1.3.6.1.4.1.89.88.19.1.1INTEGERnot-accessiblecurrent
rlQosTcpQueueValue
OBJECT-TYPE
Queue Number.
1.3.6.1.4.1.89.88.19.1.2INTEGER (1..8)read-createcurrent
rlQosTcpPortQueueStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.19.1.3RowStatusread-createcurrent
rlQosUdpPortQueueTable
OBJECT-TYPE
This table specifies UDP Port to Queue map table
1.3.6.1.4.1.89.88.20not-accessiblecurrent
rlQosUdpPortQueueEntry
OBJECT-TYPE
Each entry in this table describes The Queue Number. The index is UDP port represent by rlQosTcpUdpPort
1.3.6.1.4.1.89.88.20.1not-accessiblecurrent
rlQosUdpPort
OBJECT-TYPE
UDP port number.
1.3.6.1.4.1.89.88.20.1.1INTEGERnot-accessiblecurrent
rlQosUdpQueueValue
OBJECT-TYPE
Queue value.
1.3.6.1.4.1.89.88.20.1.2INTEGER (1..8)read-createcurrent
rlQosUdpPortQueueStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.20.1.3RowStatusread-createcurrent
rlQosEfManageTable
OBJECT-TYPE
This table specifies UDP Port to DSCP map table
1.3.6.1.4.1.89.88.21not-accessiblecurrent
rlQosEfManageEntry
OBJECT-TYPE
This Table describes The EF management for the system. The index is UDP port represent by rlQosEfQueueId
1.3.6.1.4.1.89.88.21.1not-accessiblecurrent
rlQosEfQueueId
OBJECT-TYPE
Queue-ID.
1.3.6.1.4.1.89.88.21.1.1INTEGER (1..8)not-accessiblecurrent
rlQosEfState
OBJECT-TYPE
Enable/disable
1.3.6.1.4.1.89.88.21.1.2BinaryStatusread-createcurrent
rlQosEfPriority
OBJECT-TYPE
The priority of the queue
1.3.6.1.4.1.89.88.21.1.3INTEGER (1..8)read-createcurrent
rlQosQueueProfileTable
OBJECT-TYPE
This table describes the queue managment profiles
1.3.6.1.4.1.89.88.22not-accessiblecurrent
rlQosQueueProfileEntry
OBJECT-TYPE
Each entry in this table describes The queue managment profile Value. The index is profile name represent by rlQueueProfileName
1.3.6.1.4.1.89.88.22.1not-accessiblecurrent
rlQueueProfileName
OBJECT-TYPE
Profile name for the Queue profile.
1.3.6.1.4.1.89.88.22.1.1DisplayString (SIZE(0..32))not-accessiblecurrent
rlQosTypeQueue1
OBJECT-TYPE
EF or WRR
1.3.6.1.4.1.89.88.22.1.2QueueTyperead-createcurrent
rlQosValueQueue1
OBJECT-TYPE
for EF read-only for wrr the weight
1.3.6.1.4.1.89.88.22.1.3INTEGERread-createcurrent
rlQosTypeQueue2
OBJECT-TYPE
EF or WRR
1.3.6.1.4.1.89.88.22.1.4QueueTyperead-createcurrent
rlQosValueQueue2
OBJECT-TYPE
for EF read-only for wrr the weight
1.3.6.1.4.1.89.88.22.1.5INTEGERread-createcurrent
rlQosTypeQueue3
OBJECT-TYPE
EF or WRR
1.3.6.1.4.1.89.88.22.1.6QueueTyperead-createcurrent
rlQosValueQueue3
OBJECT-TYPE
for EF read-only for wrr the weight
1.3.6.1.4.1.89.88.22.1.7INTEGERread-createcurrent
rlQosTypeQueue4
OBJECT-TYPE
EF or WRR
1.3.6.1.4.1.89.88.22.1.8QueueTyperead-createcurrent
rlQosValueQueue4
OBJECT-TYPE
for EF read-only for wrr the weight
1.3.6.1.4.1.89.88.22.1.9INTEGERread-createcurrent
rlQosTypeQueue5
OBJECT-TYPE
EF or WRR
1.3.6.1.4.1.89.88.22.1.10QueueTyperead-createcurrent
rlQosValueQueue5
OBJECT-TYPE
for EF read-only for wrr the weight
1.3.6.1.4.1.89.88.22.1.11INTEGERread-createcurrent
rlQosTypeQueue6
OBJECT-TYPE
EF or WRR
1.3.6.1.4.1.89.88.22.1.12QueueTyperead-createcurrent
rlQosValueQueue6
OBJECT-TYPE
for EF read-only for wrr the weight
1.3.6.1.4.1.89.88.22.1.13INTEGERread-createcurrent
rlQosTypeQueue7
OBJECT-TYPE
EF or WRR
1.3.6.1.4.1.89.88.22.1.14QueueTyperead-createcurrent
rlQosValueQueue7
OBJECT-TYPE
for EF read-only for wrr the weight
1.3.6.1.4.1.89.88.22.1.15INTEGERread-createcurrent
rlQosTypeQueue8
OBJECT-TYPE
EF or WRR
1.3.6.1.4.1.89.88.22.1.16QueueTyperead-createcurrent
rlQosValueQueue8
OBJECT-TYPE
for EF read-only for wrr the weight
1.3.6.1.4.1.89.88.22.1.17INTEGERread-createcurrent
rlQosQueueProfileStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.22.1.18RowStatusread-createcurrent
rlQosNumOfIfConnections
OBJECT-TYPE
how many time this entry connected to the if policy table
1.3.6.1.4.1.89.88.22.1.19INTEGERread-onlycurrent
rlQosQueueShapeProfileTable
OBJECT-TYPE
This table specifies the queue shaper profile
1.3.6.1.4.1.89.88.23not-accessiblecurrent
rlQosQueueShapeProfileEntry
OBJECT-TYPE
Each entry in this table describes The shaper profile for all queues. The index sequencial index represent by rlQosQueueShapeIndex
1.3.6.1.4.1.89.88.23.1not-accessiblecurrent
rlQosQueueShapeIndex
OBJECT-TYPE
Profile Index.
1.3.6.1.4.1.89.88.23.1.1INTEGERnot-accessiblecurrent
rlQosCirQueue1
OBJECT-TYPE
CIR for Queue1 0 for not active
1.3.6.1.4.1.89.88.23.1.2INTEGERread-createcurrent
rlQosCbsQueue1
OBJECT-TYPE
CBS for Queue1 0 for not active
1.3.6.1.4.1.89.88.23.1.3INTEGERread-createcurrent
rlQosCirQueue2
OBJECT-TYPE
CIR for Queue2 0 for not active
1.3.6.1.4.1.89.88.23.1.4INTEGERread-createcurrent
rlQosCbsQueue2
OBJECT-TYPE
CBS for Queue2 0 for not active
1.3.6.1.4.1.89.88.23.1.5INTEGERread-createcurrent
rlQosCirQueue3
OBJECT-TYPE
CIR for Queue3 0 for not active
1.3.6.1.4.1.89.88.23.1.6INTEGERread-createcurrent
rlQosCbsQueue3
OBJECT-TYPE
CBS for Queue3 0 for not active
1.3.6.1.4.1.89.88.23.1.7INTEGERread-createcurrent
rlQosCirQueue4
OBJECT-TYPE
CIR for Queue4 0 for not active
1.3.6.1.4.1.89.88.23.1.8INTEGERread-createcurrent
rlQosCbsQueue4
OBJECT-TYPE
CBS for Queue4 0 for not active
1.3.6.1.4.1.89.88.23.1.9INTEGERread-createcurrent
rlQosCirQueue5
OBJECT-TYPE
CIR for Queue5 0 for not active
1.3.6.1.4.1.89.88.23.1.10INTEGERread-createcurrent
rlQosCbsQueue5
OBJECT-TYPE
CBS for Queue5 0 for not active
1.3.6.1.4.1.89.88.23.1.11INTEGERread-createcurrent
rlQosCirQueue6
OBJECT-TYPE
CIR for Queue6 0 for not active
1.3.6.1.4.1.89.88.23.1.12INTEGERread-createcurrent
rlQosCbsQueue6
OBJECT-TYPE
CBS for Queue6 0 for not active
1.3.6.1.4.1.89.88.23.1.13INTEGERread-createcurrent
rlQosCirQueue7
OBJECT-TYPE
CIR for Queue7 0 for not active
1.3.6.1.4.1.89.88.23.1.14INTEGERread-createcurrent
rlQosCbsQueue7
OBJECT-TYPE
CBS for Queue7 0 for not active
1.3.6.1.4.1.89.88.23.1.15INTEGERread-createcurrent
rlQosCirQueue8
OBJECT-TYPE
CIR for Queue8 0 for not active
1.3.6.1.4.1.89.88.23.1.16INTEGERread-createcurrent
rlQosCbsQueue8
OBJECT-TYPE
CBS for Queue8 0 for not active
1.3.6.1.4.1.89.88.23.1.17INTEGERread-createcurrent
rlQosQueueShapeProfileStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.23.1.18RowStatusread-createcurrent
rlQosAclCounterTable
OBJECT-TYPE
The table is used to show statistics for ACL applied on an interface.
1.3.6.1.4.1.89.88.24not-accessiblecurrent
rlQosAclCounterEntry
OBJECT-TYPE
This entry shows value of conter for a particular ACE of an ACL.
1.3.6.1.4.1.89.88.24.1not-accessiblecurrent
rlQosAclCounterInterface
OBJECT-TYPE
Interface Index on which ACL is applied.
1.3.6.1.4.1.89.88.24.1.1InterfaceIndexread-onlycurrent
rlQosAclCounterAclIndex
OBJECT-TYPE
Index of ACL, which was applied on the IfIndex.
1.3.6.1.4.1.89.88.24.1.2INTEGERread-onlycurrent
rlQosAclCounterAceIndex
OBJECT-TYPE
Index of ACE, which is belong to an ACL.
1.3.6.1.4.1.89.88.24.1.3INTEGERread-onlycurrent
rlQosAclCounterValue
OBJECT-TYPE
The value of the ACE counter.
1.3.6.1.4.1.89.88.24.1.4Counter32read-onlycurrent
rlQosFreeIndexesTable
OBJECT-TYPE
The table is used to get free indexes of tables to create new entries. The algorithm for free indexes depends on table's type: Tuple table - first free index. Offset table - first free index. ACE table - last used index + ACE indexes delta. ACL table - first free index. Class Map table - last used index + Class Map indexes delta. Policy Map table - first free index. Policer Table - first free index. The ACE indexes delta and Class Map indexes delta are used to supply QoS MIB user easy insert entry capabilities. Values of these deltas depend on the MIB implementation. The 'Get and increment' approach is used in all cases.
1.3.6.1.4.1.89.88.25not-accessiblecurrent
rlQosFreeIndexesEntry
OBJECT-TYPE
The entry is used to get free index for particular table.
1.3.6.1.4.1.89.88.25.1not-accessiblecurrent
rlQosFreeIndexesTableId
OBJECT-TYPE
Identification of the table, for which free index is retrieved.
1.3.6.1.4.1.89.88.25.1.1INTEGER {tuple(1), offset(2), ace(3), acl(4), class(5), policy(6), policer(7), shaper(8)}read-onlycurrent
rlQosFreeIndexesValue
OBJECT-TYPE
Free index for table. 0 means no free entries.
1.3.6.1.4.1.89.88.25.1.2INTEGERread-onlycurrent
rlQosNamesToIndexesTable
OBJECT-TYPE
The table is used to get the ACL,Class-Map and Policy-Map indexes from the name.
1.3.6.1.4.1.89.88.26not-accessiblecurrent
rlQosNamesToIndexesEntry
OBJECT-TYPE
The entry is used to get index form particular name and table type.
1.3.6.1.4.1.89.88.26.1not-accessiblecurrent
rlQosNamesToIndexesTableId
OBJECT-TYPE
Identification of the table, for which the index is retrieved.
1.3.6.1.4.1.89.88.26.1.1INTEGER {acl(1), class(2), policy(3), policer(4)}not-accessiblecurrent
rlQosNamesToIndexesName
OBJECT-TYPE
The name of the entry
1.3.6.1.4.1.89.88.26.1.2DisplayString (SIZE(0..32))not-accessiblecurrent
rlQosNamesToIndexesValue
OBJECT-TYPE
the index for table
1.3.6.1.4.1.89.88.26.1.3INTEGERread-onlycurrent
rlQosStackControlQueue
OBJECT-TYPE
This scalar object defines queue ID, which is used for stack control information transfer. For standalone systems the scalar value equals 0. This scalar object can be used for warning messages when users assign a QoS map item, or a Class to the stack control queue.
1.3.6.1.4.1.89.88.27INTEGERread-onlycurrent
rlQosStackControlCos
OBJECT-TYPE
This scalar object defines CoS (VPT), which is used for stack control information transfer. For standalone systems the scalar value equals 8 (not valid for VPT). This scalar object can be used for warning messages when users assign a stack control CoS to a non-stacking control queue.
1.3.6.1.4.1.89.88.28INTEGERread-onlycurrent
rlQosCosQueueDefaultMapTable
OBJECT-TYPE
The table is used to set default 802.1p map (vpt to queue)
1.3.6.1.4.1.89.88.29not-accessiblecurrent
rlQosCosQueueDefaultMapEntry
OBJECT-TYPE
The entry is used to get index form particular name and table type.
1.3.6.1.4.1.89.88.29.1not-accessiblecurrent
rlQosCosQueueDefaultMapVpt
OBJECT-TYPE
vlan priority tag , 3 bits of priority which determine the service class.
1.3.6.1.4.1.89.88.29.1.1INTEGER (0..7)read-onlycurrent
rlQosCosQueueDefaultMapQueueId
OBJECT-TYPE
the queue id vary from the first queue id to Max Number of queues supported
1.3.6.1.4.1.89.88.29.1.2INTEGER (1..8)read-onlycurrent
rlQosPredefBlockAclTable
OBJECT-TYPE
The table is used apply predefined ACLs to interfaces. Predefined ACLs is ACL to filter particular protocol or protocol's family. These ACL may operate simultaneously with IP and MAC ACLs.
1.3.6.1.4.1.89.88.30not-accessiblecurrent
rlQosPredefBlockAclEntry
OBJECT-TYPE
The entry is used to apply predefined ACLs to the interface.
1.3.6.1.4.1.89.88.30.1not-accessiblecurrent
rlQosPredefBlockAclIfIndex
OBJECT-TYPE
IfIndex of port/trunk or VLAN tag of VLAN on which predefined ACLa will be configured.
1.3.6.1.4.1.89.88.30.1.1InterfaceIndexnot-accessiblecurrent
rlQosPredefBlockAclIfType
OBJECT-TYPE
Interface Type(vlan/port).
1.3.6.1.4.1.89.88.30.1.2InterfaceTypenot-accessiblecurrent
rlQosPredefBlockAclMask
OBJECT-TYPE
This bitmap defines predefined ACL which are applied on an interface. The table below defines bitmasks for supported predefined ACL. Protocol/Family bitmask Description ===================================================== LLC NetBuei/NetBios 0x01 ACL filters out LLC encapsulated NetBuei/NetBios frames IP NetBuei/NetBios 0x02 ACL filters out IP encapsulated NetBuei/NetBios frames
1.3.6.1.4.1.89.88.30.1.3OCTET STRING (SIZE(1))read-createcurrent
rlQosPredefBlockAclStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.30.1.4RowStatusread-createcurrent
rlQosAceTidxTable
OBJECT-TYPE
This table specifies ACE table with two index information
1.3.6.1.4.1.89.88.31not-accessiblecurrent
rlQosAceTidxEntry
OBJECT-TYPE
Each entry in this table describes one Classifier Element. The information includes: Action the ACE's Type the up to 11 tuples pointers. The index is sequential integer represent by rlQosAceTidxAclIndex ACL index and rlQosAceTidxIndex ACE index
1.3.6.1.4.1.89.88.31.1not-accessiblecurrent
rlQosAceTidxAclIndex
OBJECT-TYPE
An arbitrary incremental Index for the ACL ACE connection.
1.3.6.1.4.1.89.88.31.1.1INTEGERnot-accessiblecurrent
rlQosAceTidxIndex
OBJECT-TYPE
An arbitrary incremental Index for the ACE table.
1.3.6.1.4.1.89.88.31.1.2INTEGERnot-accessiblecurrent
rlQosAceTidxAction
OBJECT-TYPE
ACE Action to take.
1.3.6.1.4.1.89.88.31.1.3AceActionTyperead-createcurrent
rlQosAceTidxType
OBJECT-TYPE
ACE Type
1.3.6.1.4.1.89.88.31.1.4AceObjectTyperead-createcurrent
rlQosAceTidxTuple1
OBJECT-TYPE
ACE Tuple pointer.
1.3.6.1.4.1.89.88.31.1.5INTEGERread-createcurrent
rlQosAceTidxTuple2
OBJECT-TYPE
ACE Tuple pointer.
1.3.6.1.4.1.89.88.31.1.6INTEGERread-createcurrent
rlQosAceTidxTuple3
OBJECT-TYPE
ACE Tuple pointer.
1.3.6.1.4.1.89.88.31.1.7INTEGERread-createcurrent
rlQosAceTidxTuple4
OBJECT-TYPE
ACE Tuple pointer.
1.3.6.1.4.1.89.88.31.1.8INTEGERread-createcurrent
rlQosAceTidxTuple5
OBJECT-TYPE
ACE Tuple pointer.
1.3.6.1.4.1.89.88.31.1.9INTEGERread-createcurrent
rlQosAceTidxTuple6
OBJECT-TYPE
ACE Tuple pointer.
1.3.6.1.4.1.89.88.31.1.10INTEGERread-createcurrent
rlQosAceTidxTuple7
OBJECT-TYPE
ACE Tuple pointer.
1.3.6.1.4.1.89.88.31.1.11INTEGERread-createcurrent
rlQosAceTidxTuple8
OBJECT-TYPE
ACE Tuple pointer.
1.3.6.1.4.1.89.88.31.1.12INTEGERread-createcurrent
rlQosAceTidxAccount
OBJECT-TYPE
ACE Accounting state. When set to 'enabled' than appropriate statistic's counter is provided for an ACE.
1.3.6.1.4.1.89.88.31.1.13BinaryStatusread-createcurrent
rlQosAceTidxStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.31.1.14RowStatusread-createcurrent
rlQosAceTidxTimeRange
OBJECT-TYPE
ACE time range name.
1.3.6.1.4.1.89.88.31.1.15DisplayString (SIZE(0..32))read-createcurrent
rlQosAceTidxTimeRangeIsActive
OBJECT-TYPE
ACE time range is rule active state shows is ACE currently active or not.
1.3.6.1.4.1.89.88.31.1.16TruthValueread-onlycurrent
rlQosAceTidxTuple9
OBJECT-TYPE
ACE Tuple pointer.
1.3.6.1.4.1.89.88.31.1.17INTEGERread-createcurrent
rlQosAceTidxTuple10
OBJECT-TYPE
ACE Tuple pointer.
1.3.6.1.4.1.89.88.31.1.18INTEGERread-createcurrent
rlQosAceTidxTuple11
OBJECT-TYPE
ACE Tuple pointer.
1.3.6.1.4.1.89.88.31.1.19INTEGERread-createcurrent
rlQosAceTidxActionDropType
OBJECT-TYPE
This field is valid only if AceActionType is deny or deny-DisablePort.
1.3.6.1.4.1.89.88.31.1.20RlQosAceTidxActionDropTyperead-createcurrent
rlQosMibVersion
OBJECT-TYPE
MIB's version, the current version is 11 1 - original version 2 - Add new two MIB's items. - rlQosAceTidxTable - Ace table with two indexes - rlQosMibVersion. Change the unit in Policer table from bps to kbps 3 - Add new MIB's value for Textual convention QosObjectMode 4 - Add new MIBs rlQosDscpQueueDefaultMapTable 5 - Add new advanced action : trustCosDscp 6 - Add vpt,ether-type,tcp-flags,icmp-type,icmp-code,igmp-type to ClassTupleType Add ip-ICMP,ip-IGMP To AceObjectType Add vpt,ethertype To ClassOffsetType 7- Add rlQosPortRateLimitStatus,rlQosCirPortRateLimit, rlQosCbsPortRateLimit to rlQosIfPolicyTable 8 - Add Added rlQosDscpToDpTable 9 - Add statistics 10 - Add innerVlan to ClassOffsetType And inner-vlan to ClassTupleType 11 - Added rlQosCPUSafeGuardEnable
1.3.6.1.4.1.89.88.32INTEGERread-onlycurrent
rlQosDscpQueueDefaultMapTable
OBJECT-TYPE
The table is used to set default dscp to queue map
1.3.6.1.4.1.89.88.33not-accessiblecurrent
rlQosDscpQueueDefaultMapEntry
OBJECT-TYPE
The entry is used to get index form particular name and table type.
1.3.6.1.4.1.89.88.33.1not-accessiblecurrent
rlQosDscpQueueDefaultMapDscp
OBJECT-TYPE
dscp , 6 bits of priority which determine the service class.
1.3.6.1.4.1.89.88.33.1.1INTEGER (0..63)read-onlycurrent
rlQosDscpQueueDefaultMapQueueId
OBJECT-TYPE
the queue id vary from the first queue id to Max Number of queues supported
1.3.6.1.4.1.89.88.33.1.2INTEGER (1..8)read-onlycurrent
rlQosDscpToDpTable
OBJECT-TYPE
This table specifies The DSCP To Dp table
1.3.6.1.4.1.89.88.34not-accessiblecurrent
rlQosDscpToDpEntry
OBJECT-TYPE
Each entry in this table describes the new DP for the packet. The index is DSCP represent by rlQosDscp
1.3.6.1.4.1.89.88.34.1not-accessiblecurrent
rlQosDscp
OBJECT-TYPE
Packet DSCP.
1.3.6.1.4.1.89.88.34.1.1INTEGER (0..63)not-accessiblecurrent
rlQosDp
OBJECT-TYPE
New DP.
1.3.6.1.4.1.89.88.34.1.2INTEGER (0..2)read-createcurrent
rlQosStatistics
OBJECT-IDENTITY
1.3.6.1.4.1.89.88.35
rlQosPortPolicyStatisticsTable
OBJECT-TYPE
This table specifies statistics counter for policies with specific actions
1.3.6.1.4.1.89.88.35.1not-accessiblecurrent
rlQosPortPolicyStatisticsEntry
OBJECT-TYPE
Each entry in this table describes counter per port. The index is port represent by rlIfIndex. In each entry represents counter, it's type , it's size and whether it's enabled.
1.3.6.1.4.1.89.88.35.1.1not-accessiblecurrent
rlQosPortPolicyStatisticsCntrType
OBJECT-TYPE
Counter type.
1.3.6.1.4.1.89.88.35.1.1.1StatisticsCntrTyperead-writecurrent
rlQosPortPolicyStatisticsCntrNumOfBits
OBJECT-TYPE
Counter size in bits.
1.3.6.1.4.1.89.88.35.1.1.2StatisticsCntrNumOfBitsTyperead-onlycurrent
rlQosPortPolicyStatisticsEnableCounting
OBJECT-TYPE
Indication whether the counter is enabled.
1.3.6.1.4.1.89.88.35.1.1.3TruthValueread-writecurrent
rlQosPortPolicyStatisticsCounterValue
OBJECT-TYPE
Counter value.
1.3.6.1.4.1.89.88.35.1.1.4Counter64read-onlycurrent
rlQosSinglePolicerStatisticsTable
OBJECT-TYPE
This table specifies statistics counters per QoS meter
1.3.6.1.4.1.89.88.35.2not-accessiblecurrent
rlQosSinglePolicerStatisticsEntry
OBJECT-TYPE
Each entry in this table describes counter per meter. The index is port represent by RlQosMeterStatisticsPort and RlQosMeterStatisticsPolicerPointer. In each entry there are fields representing whether the counter for the meter is enabled and two counters value - for in-profile bytes and for out-of-profile bytes.
1.3.6.1.4.1.89.88.35.2.1not-accessiblecurrent
rlQosSinglePolicerStatisticsInProfileCounterValue
OBJECT-TYPE
Counter value of in profile traffic.
1.3.6.1.4.1.89.88.35.2.1.1Counter64read-onlycurrent
rlQosSinglePolicerStatisticsInProfileCntrNumOfBits
OBJECT-TYPE
Counter size in bits for in profile counter.
1.3.6.1.4.1.89.88.35.2.1.2StatisticsCntrNumOfBitsTyperead-onlycurrent
rlQosSinglePolicerStatisticsOutProfileCounterValue
OBJECT-TYPE
Counter value of Out Profile traffic.
1.3.6.1.4.1.89.88.35.2.1.3Counter64read-onlycurrent
rlQosSinglePolicerStatisticsOutProfileCntrNumOfBits
OBJECT-TYPE
Counter size in bits for out profile counter.
1.3.6.1.4.1.89.88.35.2.1.4StatisticsCntrNumOfBitsTyperead-onlycurrent
rlQosSinglePolicerStatisticsStatus
OBJECT-TYPE
The status of a table entry. It is used to delete an entry from this table.
1.3.6.1.4.1.89.88.35.2.1.5RowStatusread-writecurrent
rlQosAggregatePolicerStatisticsTable
OBJECT-TYPE
This table specifies statistics counters per QoS aggregate meter
1.3.6.1.4.1.89.88.35.3not-accessiblecurrent
rlQosAggregatePolicerStatisticsEntry
OBJECT-TYPE
Each entry in this table describes counter per aggregate meter. The index is rlQosPolicerIndex. In each entry there are fields representing whether the counter for the meter is enabled and three counters values - for green, yellow and red profiles bytes.
1.3.6.1.4.1.89.88.35.3.1not-accessiblecurrent
rlQosAggregatePolicerStatisticsInProfileCounterValue
OBJECT-TYPE
Counter value of In Profile amount of bytes.
1.3.6.1.4.1.89.88.35.3.1.1Counter64read-onlycurrent
rlQosAggregatePolicerStatisticsInProfileCntrNumOfBits
OBJECT-TYPE
Counter size in bits for In Profile .
1.3.6.1.4.1.89.88.35.3.1.2StatisticsCntrNumOfBitsTyperead-onlycurrent
rlQosAggregatePolicerStatisticsOutProfileCounterValue
OBJECT-TYPE
Counter value of Out Profile amount of bytes.
1.3.6.1.4.1.89.88.35.3.1.3Counter64read-onlycurrent
rlQosAggregatePolicerStatisticsOutProfileCntrNumOfBits
OBJECT-TYPE
Counter size in bits for Out Profile.
1.3.6.1.4.1.89.88.35.3.1.4StatisticsCntrNumOfBitsTyperead-onlycurrent
rlQosAggregatePolicerStatisticsStatus
OBJECT-TYPE
The status of a table entry. It is used to delete an entry from this table.
1.3.6.1.4.1.89.88.35.3.1.5RowStatusread-writecurrent
rlQosOutQueueStatisticsTable
OBJECT-TYPE
This table specifies statistics counters per VLAN/Port/Queue/Drop Precedence
1.3.6.1.4.1.89.88.35.4not-accessiblecurrent
rlQosOutQueueStatisticsEntry
OBJECT-TYPE
Each entry in this table describes counter per any permutation of Port/VLAN/Queue/Drop Precedence. Each of the above can a group off 'All'. The index is port represent by rlQosOutQueueStatisticsCountrID. In each entry there are fields representing whether the counter is enabled and counters value.
1.3.6.1.4.1.89.88.35.4.1not-accessiblecurrent
rlQosOutQueueStatisticsCountrID
OBJECT-TYPE
Counter id, the key of the table.
1.3.6.1.4.1.89.88.35.4.1.1INTEGERread-writecurrent
rlQosOutQueueStatisticsIfIndexList
OBJECT-TYPE
Port for which the flow is counted.
1.3.6.1.4.1.89.88.35.4.1.2PortListread-writecurrent
rlQosOutQueueStatisticsPortAll
OBJECT-TYPE
Indication for whether the port is configured as range of all the ports
1.3.6.1.4.1.89.88.35.4.1.3TruthValueread-writecurrent
rlQosOutQueueStatisticsVlan
OBJECT-TYPE
VLAN for which the flow is counted.
1.3.6.1.4.1.89.88.35.4.1.4INTEGERread-writecurrent
rlQosOutQueueStatisticsVlanAll
OBJECT-TYPE
Indication for whether the VLAN is configured as range of all the VLANS
1.3.6.1.4.1.89.88.35.4.1.5TruthValueread-writecurrent
rlQosOutQueueStatisticsQueue
OBJECT-TYPE
Queue for which the flow is counted.
1.3.6.1.4.1.89.88.35.4.1.6INTEGER (1..8)read-writecurrent
rlQosOutQueueStatisticsQueueAll
OBJECT-TYPE
Indication for whether the queue is configured as range of all the Queues
1.3.6.1.4.1.89.88.35.4.1.7TruthValueread-writecurrent
rlQosOutQueueStatisticsDP
OBJECT-TYPE
Drop Precedence for which the flow is counted.
1.3.6.1.4.1.89.88.35.4.1.8StatisticsDPTyperead-writecurrent
rlQosOutQueueStatisticsDPAll
OBJECT-TYPE
Indication for whether the DP is configured as range of all the DPs
1.3.6.1.4.1.89.88.35.4.1.9TruthValueread-writecurrent
rlQosOutQueueStatisticsCounterTailDropValue
OBJECT-TYPE
The counter for tail dropped value.
1.3.6.1.4.1.89.88.35.4.1.10Counter64read-onlycurrent
rlQosOutQueueStatisticsCounterAllValue
OBJECT-TYPE
The counter for all traffic value.
1.3.6.1.4.1.89.88.35.4.1.11Counter64read-onlycurrent
rlQosOutQueueStatisticsCntrNumOfBits
OBJECT-TYPE
Counter size in bits for the counter.
1.3.6.1.4.1.89.88.35.4.1.12StatisticsCntrNumOfBitsTyperead-onlycurrent
rlQosOutQueueStatisticsStatus
OBJECT-TYPE
The status of a table entry. It is used to delete an entry from this table.
1.3.6.1.4.1.89.88.35.4.1.13RowStatusread-writecurrent
rlQosGlobalStatisticsCntrsTable
OBJECT-TYPE
This table specifies statistics global counters for specific rules for all ports that they are connected to
1.3.6.1.4.1.89.88.35.5not-accessiblecurrent
rlQosGlobalStatisticsCntrsEntry
OBJECT-TYPE
Each entry represents global counter.
1.3.6.1.4.1.89.88.35.5.1not-accessiblecurrent
rlQosGlobalStatisticsCntrsType
OBJECT-TYPE
Counter type.
1.3.6.1.4.1.89.88.35.5.1.1StatisticsCntrTyperead-onlycurrent
rlQosGlobalStatisticsCntrsNumOfBits
OBJECT-TYPE
Counter size in bits.
1.3.6.1.4.1.89.88.35.5.1.2StatisticsCntrNumOfBitsTyperead-onlycurrent
rlQosGlobalStatisticsCntrsCounterValue
OBJECT-TYPE
Counter value.
1.3.6.1.4.1.89.88.35.5.1.3Counter64read-onlycurrent
rlQosGlobalStatisticsStatus
OBJECT-TYPE
The status of a table entry. It is used to delete an entry from this table.
1.3.6.1.4.1.89.88.35.5.1.4RowStatusread-writecurrent
rlQosClearCounters
OBJECT-TYPE
This scalar indicates to clear all the counters.
1.3.6.1.4.1.89.88.35.6INTEGERread-writecurrent
rlQosClassifierUtilization
OBJECT-IDENTITY
1.3.6.1.4.1.89.88.36
rlQosClassifierUtilizationTable
OBJECT-TYPE
A table containing Classifier utilization information. Each row represents objects for a particular Unit present in this system.
1.3.6.1.4.1.89.88.36.1not-accessiblecurrent
rlQosClassifierUtilizationEntry
OBJECT-TYPE
A Single entry containing Classifier utilization information.
1.3.6.1.4.1.89.88.36.1.1not-accessiblecurrent
rlQosClassifierUtilizationUnitId
OBJECT-TYPE
The Unit ID of this Classifier. must be unique per entry. This is an index into the table.
1.3.6.1.4.1.89.88.36.1.1.1Unsigned32 (1..4294967295)not-accessiblecurrent
rlQosClassifierUtilizationPercent
OBJECT-TYPE
The classifier utilization percentage.
1.3.6.1.4.1.89.88.36.1.1.2Unsigned32 (0..100)read-onlycurrent
rlQosClassifierUtilizationRulesNumber
OBJECT-TYPE
The classifier utilization number of used rules, in short rules resolution.
1.3.6.1.4.1.89.88.36.1.1.3Unsigned32 (0..4294967295)read-onlycurrent
rlQosClassifierUtilizationFreeRulesNumber
OBJECT-TYPE
The classifier utilization number of not used yet rules on the unit, in short rules resolution.
1.3.6.1.4.1.89.88.36.1.1.4Unsigned32 (0..4294967295)read-onlycurrent
rlQosClassifierUtilizationSystem
OBJECT-TYPE
The system classifier utilization percentage.
1.3.6.1.4.1.89.88.36.2Unsigned32 (0..100)read-onlycurrent
rlQosClassifierRulesNumberUtilizationSystem
OBJECT-TYPE
Number of used rules per system, in short rule resolution
1.3.6.1.4.1.89.88.36.3Unsigned32 (0..4294967295)read-onlycurrent
rlQosClassifierFreeRulesNumUtilizationSystem
OBJECT-TYPE
Number of free rules per system, in short rule resolution
1.3.6.1.4.1.89.88.36.4Unsigned32 (0..4294967295)read-onlycurrent
rlQosClassifierMaxRulesNumberUtilizationSystem
OBJECT-TYPE
Maximum number of rules per system, in short rule resolution
1.3.6.1.4.1.89.88.36.5Unsigned32 (0..4294967295)read-onlycurrent
rlQosPortToProfileMappingTable
OBJECT-TYPE
This table maps between port and profile
1.3.6.1.4.1.89.88.37not-accessiblecurrent
rlQosPortToProfileMappingEntry
OBJECT-TYPE
Each entry in this table describes mapping between port and profile
1.3.6.1.4.1.89.88.37.1not-accessiblecurrent
rlQosPort
OBJECT-TYPE
Port number
1.3.6.1.4.1.89.88.37.1.1INTEGERnot-accessiblecurrent
rlQosProfileName
OBJECT-TYPE
profile
1.3.6.1.4.1.89.88.37.1.2DisplayStringread-onlycurrent
rlQosCPUSafeGuardEnable
OBJECT-TYPE
This scalar enables/disables CPU Safeguard.
1.3.6.1.4.1.89.88.38INTEGERread-writecurrent
rlQosPolicyClassPriorityRefTable
OBJECT-TYPE
This table specifies The relationship between policy map to class map
1.3.6.1.4.1.89.88.39not-accessiblecurrent
rlQosPolicyClassPriorityRefEntry
OBJECT-TYPE
Each entry in this table describes the connection between class-map entry to policy map by using pointers. The index is Class map pointer represent by rlQosPolicyClassRefClassPointer. It is also specifies the class-map priotiry in the policy-map, which set the rules order within the policy-map
1.3.6.1.4.1.89.88.39.1not-accessiblecurrent
rlQosPolicyClassPriorityRefPriority
OBJECT-TYPE
The class-map priority within the policy-map
1.3.6.1.4.1.89.88.39.1.1INTEGERnot-accessiblecurrent
rlQosPolicyClassPriorityRefClassPointer
OBJECT-TYPE
Class-map index Pointer
1.3.6.1.4.1.89.88.39.1.2INTEGERread-createcurrent
rlQosPolicyClassPriorityRefPolicyPointer
OBJECT-TYPE
Policy map index Pointer
1.3.6.1.4.1.89.88.39.1.3INTEGERread-createcurrent
rlQosPolicyClassPriorityRefStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.39.1.4RowStatusread-createcurrent
rlQosDenyAceStatisticsTable
OBJECT-TYPE
This table holds statistics for deny ACEs.
1.3.6.1.4.1.89.88.42not-accessiblecurrent
rlQosDenyAceStatisticsEntry
OBJECT-TYPE
Each entry in this table holds number of hits for deny ACEs attached to specific Interface.
1.3.6.1.4.1.89.88.42.1not-accessiblecurrent
rlQosDenyAceStatisticsIfIndex
OBJECT-TYPE
Interface Index.
1.3.6.1.4.1.89.88.42.1.1INTEGERnot-accessiblecurrent
rlQosDenyAceStatisticsIfCounter
OBJECT-TYPE
Number of hits on deny ACEs for this interface.
1.3.6.1.4.1.89.88.42.1.2INTEGERread-onlycurrent
rlQosDenyAceStatisticsOtherFlowCounter
OBJECT-TYPE
Number of hits on deny ACEs for 'Other'-type flow.
1.3.6.1.4.1.89.88.43INTEGERread-onlycurrent
rlQosDenyAceStatisticsClearIfCounters
OBJECT-TYPE
Keeps ifIndex a port or trunk or vlan that its hit counters should be reset. If the value is 0 then all interfaces counters must be reset.
1.3.6.1.4.1.89.88.44InterfaceIndexOrZeroread-writecurrent
rlQosDenyAceStatisticsClearOtherFlowCounter
OBJECT-TYPE
This scalar indicates clearing 'Other'-type flow counter operation.
1.3.6.1.4.1.89.88.45INTEGERread-writecurrent
rlQosModeGlobalCfgTable
OBJECT-TYPE
This table responsible to set the global qos mode configuration: qos mode, qos trust mode, and if port are trusted by default in qos advanced mode.
1.3.6.1.4.1.89.88.46not-accessiblecurrent
rlQosModeGlobalCfgEntry
OBJECT-TYPE
This table responsible to set the global qos mode configuration: qos mode, qos trust mode, and if port are trusted by default in qos advanced mode. Current implemnetaion assumes only one entry exist.
1.3.6.1.4.1.89.88.46.1not-accessiblecurrent
rlQosGlobalIndex
OBJECT-TYPE
Entry index - currenly only one entry can exist, indexes hard coded with value '1'.
1.3.6.1.4.1.89.88.46.1.1INTEGERnot-accessiblecurrent
rlQosGlobalQoSMode
OBJECT-TYPE
This field replaces deprecated scalar rlQosCliQosMode. Defines the global qos operation mode: disable, basic or advnaced.
1.3.6.1.4.1.89.88.46.1.2QosGlobalModeread-writecurrent
rlQosBasicGlobalTrustMode
OBJECT-TYPE
This field replaces deprecated scalar rlQosCliBasicModeCfg. Defines the global qos trust operation mode relevant for qos basic mode.
1.3.6.1.4.1.89.88.46.1.3QosTrustModeread-writecurrent
rlQosAdvcGlobalTrustMode
OBJECT-TYPE
This field replaces deprecated scalar rlQosCliBasicModeCfg. Defines the global qos trust operation mode relevant for qos advanced mode.
1.3.6.1.4.1.89.88.46.1.4QosTrustModeread-writecurrent
rlQoSPortTrustAdvancedMode
OBJECT-TYPE
This field specified whether ports are set to trused or not-trusted by default when switching to qos advanced mode.
1.3.6.1.4.1.89.88.46.1.5TruthValueread-writecurrent
rlQosDscpMutationEnable
OBJECT-TYPE
This field indicates if dscp to dscp mutation mode is enable. It can be set to true in the following terms: 1.rlQosGlobalTrustMode is in {dscp, vpt-dscp} ( rlQosGlobalQoSMode must be basic or advanced) 2.if rlQosGlobalQoSMode is advanced then rlQoSPortTrustAdvancedMode must be set to true.
1.3.6.1.4.1.89.88.46.1.6TruthValueread-writecurrent
rlQosModeGlobalCfgStatus
OBJECT-TYPE
This status of entry action. In current implementation only one entry exist, therefor only status = active is acceptable.
1.3.6.1.4.1.89.88.46.1.7RowStatusread-writecurrent
rlQosClassMapCounterTable
OBJECT-TYPE
The table is used to show statistics for ACL applied on an interface.
1.3.6.1.4.1.89.88.47not-accessiblecurrent
rlQosClassMapCounterEntry
OBJECT-TYPE
This entry returns the value of the class map counter. Entry is added/deleted to this MIB when counting is enabled/disabled on the class map. The counter is set to zero upon reading its value.
1.3.6.1.4.1.89.88.47.1not-accessiblecurrent
rlQosClassMapCounterValue
OBJECT-TYPE
This field returns the current value of the class map counter.
1.3.6.1.4.1.89.88.47.1.2Counter64read-onlycurrent
rlQosApplicationTrapIdTable
OBJECT-TYPE
The read only table is used to get the trapId assisated to application wants to use the trap action in the class map table
1.3.6.1.4.1.89.88.48not-accessiblecurrent
rlQosApplicationTrapIdEntry
OBJECT-TYPE
This entry holds the trapId for application using the trap action in the class map table.
1.3.6.1.4.1.89.88.48.1not-accessiblecurrent
rlQosApplicationName
OBJECT-TYPE
This field represents the application name and traffic type.
1.3.6.1.4.1.89.88.48.1.1DisplayString (SIZE(1..32))not-accessiblecurrent
rlQosApplicationTrapId
OBJECT-TYPE
This field defines the trap id to be use in the class map entry.
1.3.6.1.4.1.89.88.48.1.2INTEGERread-onlycurrent
rlQoSApplicationDefaultAction
OBJECT-TYPE
This scalar specifies application-specific default action
1.3.6.1.4.1.89.88.49RlQosApplicationDefaultActionTyperead-writecurrent
rlQosLogInputInterfacesAceMatchedTable
OBJECT-TYPE
This table holds a list and of ACE matched log-input option interfaces.
1.3.6.1.4.1.89.88.50not-accessiblecurrent
rlQosLogInputInterfacesAceMatchedEntry
OBJECT-TYPE
This table holds only one entry of port list and vlan list.
1.3.6.1.4.1.89.88.50.1not-accessiblecurrent
rlQosLogInputInterfacesAceMatchedIndex
OBJECT-TYPE
An index is entrie's sequence.
1.3.6.1.4.1.89.88.50.1.1INTEGERnot-accessiblecurrent
rlQosLogInputInterfacesAceMatchedPorts
OBJECT-TYPE
the matched log-input ACEs port list
1.3.6.1.4.1.89.88.50.1.2PortListread-onlycurrent
rlQosLogInputInterfacesAceMatchedVlanList1to1024
OBJECT-TYPE
the matched log-input ACEs vlan list from 1 to 1024.
1.3.6.1.4.1.89.88.50.1.3VlanList1read-onlycurrent
rlQosLogInputInterfacesAceMatchedVlanList1025to2048
OBJECT-TYPE
the matched log-input ACEs vlan list from 1025 to 2048.
1.3.6.1.4.1.89.88.50.1.4VlanList2read-onlycurrent
rlQosLogInputInterfacesAceMatchedVlanList2049to3072
OBJECT-TYPE
the matched log-input ACEs vlan list from 2049 to 3072.
1.3.6.1.4.1.89.88.50.1.5VlanList3read-onlycurrent
rlQosLogInputInterfacesAceMatchedVlanList3073to4094
OBJECT-TYPE
the matched log-input ACEs vlan list from 3073 to 4094.
1.3.6.1.4.1.89.88.50.1.6VlanList4read-onlycurrent