Dell-MNGINF-MIB
- Registered at
- 1.3.6.1.4.1.89.89
- Last updated
- 2003-09-21 00:00
- Organization
- Dell
- Revisions
- 2003-09-21 00:00
- Namespace
- dell
- Source file
Dell-MNGINF-MIB- Digest
sha256:8e09afed0f3c73dd795786971bf077f80a859704ad7d560aa6bbd31776f12e20
Description
The private MIB module definition for management access control.
Contact
www.dell.com
Imports
| From | Symbols |
|---|---|
| Dell-MIB | rnd |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
Dell-MIB Dell-MNGINF-MIB INET-ADDRESS-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| RlMngInfActionType TEXTUAL-CONVENTION Management ACL Action definition. | current | |||
| RlMngInfServiceType TEXTUAL-CONVENTION Management ACL Service type | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| rlMngInfMibVersion OBJECT-TYPE MIB's version, the current version is 1. | 1.3.6.1.4.1.89.89.1 | INTEGER | read-only | current |
| rlMngInfEnable OBJECT-TYPE The variable specifies if Management ACL functionality is enabled. | 1.3.6.1.4.1.89.89.2 | TruthValue | read-write | current |
| rlMngInfActiveListName OBJECT-TYPE The currently activated Management ACL name | 1.3.6.1.4.1.89.89.3 | DisplayString (SIZE(0..32)) | read-write | current |
| rlMngInfListTable OBJECT-TYPE The table specifies all defined Access Lists definitions for IPv4 addresses. Provide backward compatibility for previous versions. | 1.3.6.1.4.1.89.89.4 | not-accessible | current | |
| rlMngInfListEntry OBJECT-TYPE Row definition for this table. | 1.3.6.1.4.1.89.89.4.1 | not-accessible | current | |
| rlMngInfListName OBJECT-TYPE The Name of the Access List. | 1.3.6.1.4.1.89.89.4.1.1 | DisplayString (SIZE(1..32)) | read-only | current |
| rlMngInfListPriority OBJECT-TYPE The Priority value. | 1.3.6.1.4.1.89.89.4.1.2 | Unsigned32 (1..65535) | read-only | current |
| rlMngInfListIfIndex OBJECT-TYPE The IfIndex value. The IfIndex can be configured to be 0, which means don't care value. | 1.3.6.1.4.1.89.89.4.1.3 | Unsigned32 | read-write | current |
| rlMngInfListIpAddr OBJECT-TYPE The IP address. The IP address can be configured to be 0, which means don't care value. | 1.3.6.1.4.1.89.89.4.1.4 | IpAddress | read-write | current |
| rlMngInfListIpNetMask OBJECT-TYPE The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0. | 1.3.6.1.4.1.89.89.4.1.5 | IpAddress | read-write | current |
| rlMngInfListService OBJECT-TYPE Service type. The Service type address can be configured to be 0, which means any of Telnet, SNMP, HTTP, HTTPS, SSH. | 1.3.6.1.4.1.89.89.4.1.6 | RlMngInfServiceType | read-write | current |
| rlMngInfListAction OBJECT-TYPE Action type. Can be permit or deny. | 1.3.6.1.4.1.89.89.4.1.7 | RlMngInfActionType | read-write | current |
| rlMngInfListRowStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.89.89.4.1.8 | RowStatus | read-write | current |
| rlMngInfAuditingEnable OBJECT-TYPE Controls whether SysLog messages should be issued on reject by rule | 1.3.6.1.4.1.89.89.5 | TruthValue | read-write | current |
| rlMngInfListInetTable OBJECT-TYPE The table specifies all defined Access Lists definitions definitions for both IPv4 and IPv6 addresses. | 1.3.6.1.4.1.89.89.6 | not-accessible | current | |
| rlMngInfListInetEntry OBJECT-TYPE Row definition for this table. | 1.3.6.1.4.1.89.89.6.1 | not-accessible | current | |
| rlMngInfListInetName OBJECT-TYPE The Name of the Access List. | 1.3.6.1.4.1.89.89.6.1.1 | DisplayString (SIZE(1..32)) | read-only | current |
| rlMngInfListInetPriority OBJECT-TYPE The Priority value. | 1.3.6.1.4.1.89.89.6.1.2 | Unsigned32 (1..65535) | read-only | current |
| rlMngInfListInetIfIndex OBJECT-TYPE The IfIndex value. The IfIndex can be configured to be 0, which means don't care value. | 1.3.6.1.4.1.89.89.6.1.3 | Unsigned32 | read-write | current |
| rlMngInfListInetIpAddrType OBJECT-TYPE The Inet address type. | 1.3.6.1.4.1.89.89.6.1.4 | InetAddressType | read-write | current |
| rlMngInfListInetIpAddr OBJECT-TYPE The Inet address.Used for both IPv4 and IPv6 addresses. The InetIpAddress can be configured to be 0.0.0.0 and address type IPv4 , which means ignored value. | 1.3.6.1.4.1.89.89.6.1.5 | InetAddress | read-write | current |
| rlMngInfListInetIpNetMask OBJECT-TYPE This field will used in case of IPv4 addresses . For IPv6 this field ignored. Default value 255.255.255.255. | 1.3.6.1.4.1.89.89.6.1.6 | IpAddress | read-write | current |
| rlMngInfListInetService OBJECT-TYPE Service type. The Service type address can be configured to be 0, which means any of Telnet, SNMP, HTTP, HTTPS, SSH. | 1.3.6.1.4.1.89.89.6.1.7 | RlMngInfServiceType | read-write | current |
| rlMngInfListInetAction OBJECT-TYPE Action type. Can be permit or deny. | 1.3.6.1.4.1.89.89.6.1.8 | RlMngInfActionType | read-write | current |
| rlMngInfListInetRowStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.89.89.6.1.9 | RowStatus | read-write | current |
| rlMngInfListInetIPv6PrefixLength OBJECT-TYPE IPv6 prefix length.This field provide IPv6 prefix length (mask) for IPv6 only.In case of IPv4 this field will ignored | 1.3.6.1.4.1.89.89.6.1.10 | INTEGER (0..128) | read-write | current |