MIBs Depot

Dell-HWENVIROMENT

Registered at
1.3.6.1.4.1.89.83
Last updated
2003-09-21 00:00
Organization
Dell
Revisions
2003-09-21 00:00
Namespace
dell
Source file
Dell-HWENVIROMENT
Digest
sha256:7923e8eb9b1fdfcd4b56fe890606934885d2c38760b6c908ce2aa00d663a3f38

Description

The private MIB module definition for environment of Dell devices.

Contact

www.dell.com

Imports

FromSymbols
Dell-MIBrnd
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

1 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

Dell-HWENVIROMENT
Dell-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Under this module's arcs

Where the registration tree carries on below this module.

ArcNameModule
1.3.6.1.4.1.89.83.4rlSensorRADLAN-SENSORENTMIB

Textual conventions

NameOIDSyntaxAccessStatus
RlEnvMonDirection
TEXTUAL-CONVENTION
Represents the state of a device being monitored. Valid values are: unKnown(1): if the board not support air flow direction. frontToBack(2): the air flow direction of the fan is front to back. backToFront(3): the air flow direction of the fan is back to front. clockwise(4): the air flow direction of the fan is clock wise unClockwise(5): the air flow direction of the fan is unclock wise insideOutside(6): the air flow direction of the fan is inside outside outsideInside(7): the air flow direction of the fan is outside inside rightToLeft(8): the air flow direction of the fan is from right to left leftToRight(9): the air flow direction of the fan is from left to right
current
RlEnvMonState
TEXTUAL-CONVENTION
Represents the state of a device being monitored. Valid values are: normal(1): the environment is good, such as low temperature. warning(2): the environment is bad, such as temperature above normal operation range but not too high. critical(3): the environment is very bad, such as temperature much higher than normal operation limit. shutdown(4): the environment is the worst, the system should be shutdown immediately. notPresent(5): the environmental monitor is not present, such as temperature sensors do not exist. notFunctioning(6): the environmental monitor does not function properly, such as a temperature sensor generates a abnormal data like 1000 C.
current

Objects

NameOIDSyntaxAccessStatus
rlEnvPhysicalDescription
OBJECT-IDENTITY
1.3.6.1.4.1.89.83.1
rlEnvMonFanStatusTable
OBJECT-TYPE
The table of fan status maintained by the environmental monitor.
1.3.6.1.4.1.89.83.1.1not-accessiblecurrent
rlEnvMonFanStatusEntry
OBJECT-TYPE
An entry in the fan status table, representing the status of the associated fan maintained by the environmental monitor.
1.3.6.1.4.1.89.83.1.1.1not-accessiblecurrent
rlEnvMonFanStatusIndex
OBJECT-TYPE
Unique index for the fan being instrumented. This index is for SNMP purposes only, and has no intrinsic meaning.
1.3.6.1.4.1.89.83.1.1.1.1INTEGERnot-accessiblecurrent
rlEnvMonFanStatusDescr
OBJECT-TYPE
Textual description of the fan being instrumented. This description is a short textual label, suitable as a human-sensible identification for the rest of the information in the entry.
1.3.6.1.4.1.89.83.1.1.1.2DisplayString (SIZE(0..32))read-onlycurrent
rlEnvMonFanState
OBJECT-TYPE
The mandatory state of the fan being instrumented.
1.3.6.1.4.1.89.83.1.1.1.3RlEnvMonStateread-onlycurrent
rlEnvMonSupplyStatusTable
OBJECT-TYPE
The table of power supply status maintained by the environmental monitor card.
1.3.6.1.4.1.89.83.1.2not-accessiblecurrent
rlEnvMonSupplyStatusEntry
OBJECT-TYPE
An entry in the power supply status table, representing the status of the associated power supply maintained by the environmental monitor card.
1.3.6.1.4.1.89.83.1.2.1not-accessiblecurrent
rlEnvMonSupplyStatusIndex
OBJECT-TYPE
Unique index for the power supply being instrumented. This index is for SNMP purposes only, and has no intrinsic meaning.
1.3.6.1.4.1.89.83.1.2.1.1INTEGER (0..2147483647)not-accessiblecurrent
rlEnvMonSupplyStatusDescr
OBJECT-TYPE
Textual description of the power supply being instrumented. This description is a short textual label, suitable as a human-sensible identification for the rest of the information in the entry.
1.3.6.1.4.1.89.83.1.2.1.2DisplayString (SIZE(0..32))read-onlycurrent
rlEnvMonSupplyState
OBJECT-TYPE
The mandatory state of the power supply being instrumented.
1.3.6.1.4.1.89.83.1.2.1.3RlEnvMonStateread-onlycurrent
rlEnvMonSupplySource
OBJECT-TYPE
The power supply source. unknown - Power supply source unknown ac - AC power supply dc - DC power supply externalPowerSupply - External power supply internalRedundant - Internal redundant power supply
1.3.6.1.4.1.89.83.1.2.1.4INTEGER {unknown(1), ac(2), dc(3), externalPowerSupply(4), internalRedundant(5)}read-onlycurrent
rlEnvMonSupplyFanDirection
OBJECT-TYPE
The direction of the power supply's fan.
1.3.6.1.4.1.89.83.1.2.1.5RlEnvMonDirectionread-onlycurrent
rlEnvFanData
OBJECT-IDENTITY
1.3.6.1.4.1.89.83.5
rlEnvFanDataTable
OBJECT-TYPE
For each unit in a stack
1.3.6.1.4.1.89.83.5.1not-accessiblecurrent
rlEnvFanDataEntry
OBJECT-TYPE
An entry of this table specifies a unit
1.3.6.1.4.1.89.83.5.1.1not-accessiblecurrent
rlEnvFanDataStackUnit
OBJECT-TYPE
The number of the stack unit
1.3.6.1.4.1.89.83.5.1.1.1INTEGERread-onlycurrent
rlEnvFanDataTemp
OBJECT-TYPE
The unit temperature
1.3.6.1.4.1.89.83.5.1.1.2INTEGERread-onlycurrent
rlEnvFanDataSpeed
OBJECT-TYPE
Fan speed in RPM
1.3.6.1.4.1.89.83.5.1.1.3INTEGERread-onlycurrent
rlEnvFanDataOperLevel
OBJECT-TYPE
Fan speed operative level
1.3.6.1.4.1.89.83.5.1.1.4INTEGERread-onlycurrent
rlEnvFanDataAdminLevel
OBJECT-TYPE
Configured fan speed level
1.3.6.1.4.1.89.83.5.1.1.5INTEGERread-writecurrent
rlEnvFanDataDirection
OBJECT-TYPE
The direction of the system's fan.
1.3.6.1.4.1.89.83.5.1.1.6RlEnvMonDirectionread-onlycurrent