MIBs Depot

Dell-DHCPCL-MIB

Registered at
1.3.6.1.4.1.89.76
Last updated
2007-01-02 00:00
Organization
Dell
Revisions
2007-01-02 00:00
Namespace
dell
Source file
Dell-DHCPCL-MIB
Digest
sha256:620c6c4a31a05b9667b4f8812080793718c55fa426282909b5c32d52638aed58

Description

This private MIB module defines DHCP CL private MIBs.

Contact

www.dell.com

Imports

FromSymbols
Dell-MIBrnd
IF-MIBInterfaceIndex, ifIndex
INET-ADDRESS-MIBInetAddress, InetAddressType
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIIpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

Dell-DHCPCL-MIB
Dell-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
rlDhcpClActionTable
OBJECT-TYPE
The (conceptual) table mentione IP address which must be released/renewed on the interface.
1.3.6.1.4.1.89.76.3not-accessiblecurrent
rlDhcpClActionEntry
OBJECT-TYPE
An entry (conceptual row) in dhcpClActionTable.
1.3.6.1.4.1.89.76.3.1not-accessiblecurrent
rlDhcpClActionIfIndex
OBJECT-TYPE
The interface which the action is implemented for or NULL if it implemented for all device.
1.3.6.1.4.1.89.76.3.1.1InterfaceIndexread-onlycurrent
rlDhcpClActionStatus
OBJECT-TYPE
The status of this entry. Creating the entry renewing Dhcp address on the interface; destroying the entry release Dhcp address on the interface.
1.3.6.1.4.1.89.76.3.1.2RowStatusread-createcurrent
rlDhcpClActionHostName
OBJECT-TYPE
This option specifies the name of the client.
1.3.6.1.4.1.89.76.3.1.3SnmpAdminString (SIZE(0..20))read-createcurrent
rlDhcpApprovalEnabled
OBJECT-TYPE
DHCP Approval feature status - enable (True) or desable (False). Must be True only if DHCP Approval supported, device has only one ip interface and default ip exist.
1.3.6.1.4.1.89.76.4TruthValueread-onlycurrent
rlDhcpApprovalWaitingTable
OBJECT-TYPE
IP addresses waiting for approval.
1.3.6.1.4.1.89.76.5not-accessiblecurrent
rlDhcpApprovalWaitingEntry
OBJECT-TYPE
An entry in rlDhcpApprovalWaitingTable.
1.3.6.1.4.1.89.76.5.1not-accessiblecurrent
rlDhcpApprovalWaitingIfIndex
OBJECT-TYPE
IP interface ifIndex.
1.3.6.1.4.1.89.76.5.1.1InterfaceIndexread-onlycurrent
rlDhcpApprovalWaitingAddress
OBJECT-TYPE
IP Address waiting for approval.
1.3.6.1.4.1.89.76.5.1.2IpAddressread-onlycurrent
rlDhcpApprovalWaitingMask
OBJECT-TYPE
Mask waiting for approval.
1.3.6.1.4.1.89.76.5.1.3IpAddressread-onlycurrent
rlDhcpApprovalWaitingGateway
OBJECT-TYPE
Default gateway of received address.
1.3.6.1.4.1.89.76.5.1.4IpAddressread-onlycurrent
rlDhcpApprovalActionTable
OBJECT-TYPE
Action for waiting ip address (approve/decline).
1.3.6.1.4.1.89.76.6not-accessiblecurrent
rlDhcpApprovalActionEntry
OBJECT-TYPE
An entry in rlDhcpApprovalActionTable.
1.3.6.1.4.1.89.76.6.1not-accessiblecurrent
rlDhcpApprovalActionIfIndex
OBJECT-TYPE
IP interface ifIndex.
1.3.6.1.4.1.89.76.6.1.1InterfaceIndexread-onlycurrent
rlDhcpApprovalActionAddress
OBJECT-TYPE
IP Address.
1.3.6.1.4.1.89.76.6.1.2IpAddressread-onlycurrent
rlDhcpApprovalActionMask
OBJECT-TYPE
IP Address mask.
1.3.6.1.4.1.89.76.6.1.3IpAddressread-onlycurrent
rlDhcpApprovalActionApprove
OBJECT-TYPE
Approve or decline ip address.
1.3.6.1.4.1.89.76.6.1.4TruthValueread-writecurrent
rlDhcpClCommandTable
OBJECT-TYPE
Action MIB for DHCP Renew command.
1.3.6.1.4.1.89.76.7read-onlycurrent
rlDhcpClCommandEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.76.7.1not-accessiblecurrent
rlDhcpClCommandAction
OBJECT-TYPE
Action to apply. When the field is renew_force_autoconfig the meaning is that every time when DHCP option 67 is received, the configuration is downloaded from DHCP server. The default value is false.
1.3.6.1.4.1.89.76.7.1.2INTEGER {none(0), renew(1), renewForceAutoconfig(2)}read-writecurrent
rlDhcpClConfigurationFileName
OBJECT-TYPE
The configuration file name that loaded into the device. The filename is a relative path on the TFTP server, without the server IP address.
1.3.6.1.4.1.89.76.8DisplayStringread-writecurrent
rlDhcpClOption67Enable
OBJECT-TYPE
Defines whether the configuration file can be downloaded from DHCP packet option 67.
1.3.6.1.4.1.89.76.9INTEGER {enable(1), disable(2)}read-writecurrent
rlDhcpClManualTftpServerAddress
OBJECT-TYPE
Manually configured TFTP server IP Address.
1.3.6.1.4.1.89.76.10IpAddressread-writecurrent
rlDhcpClSelectedTftpServerAddress
OBJECT-TYPE
Currently selected TFTP server IP Address.
1.3.6.1.4.1.89.76.11IpAddressread-onlycurrent
rlDhcpClSelectedTftpServerAddressOrigin
OBJECT-TYPE
Currently selected TFTP server IP Address's origin
1.3.6.1.4.1.89.76.12INTEGER {sname(1), option66(2), option150(3), option129(4), siaddr(5), manual(6), unknown(7), none(8), optionv6-59(9), broadcastReply(10)}read-onlycurrent
rlDhcpClManualConfigurationFileName
OBJECT-TYPE
The manually configured file name.
1.3.6.1.4.1.89.76.13DisplayStringread-writecurrent
rlDhcpClSelectedConfigurationFileName
OBJECT-TYPE
The selected configuration file name.
1.3.6.1.4.1.89.76.14DisplayStringread-onlycurrent
rlDhcpClSelectedConfigurationFileNameOrigin
OBJECT-TYPE
The selected configuration files name origin.
1.3.6.1.4.1.89.76.15INTEGER {file(1), option67(2), manual(3), none(4), hostname(5), defaultConfigFile(6), optionv6-60(7)}read-onlycurrent
rlDhcpClEnabledByDefaultRemovedIfindex
OBJECT-TYPE
DHCP Client flag is relevant when host parameter dhcp_client_active_on_start is TRUE. If the MIB has non zero value the meaning is that DHCP client has removed from configuration by the user on the interface and signs to application not to add DHCP client entry. Otherwise (zero value) - the meaning is that DHCP client entry must be added.
1.3.6.1.4.1.89.76.16INTEGERread-writecurrent
rlDhcpClAutoUpdateEnabled
OBJECT-TYPE
Setting this MIB value to True/False enables/disables DHCP auto-update process in the device (through option 125).
1.3.6.1.4.1.89.76.17TruthValueread-writecurrent
rlDhcpClAutoUpdateStatus
OBJECT-TYPE
Describes the status of current/last DHCP auto-update process.
1.3.6.1.4.1.89.76.18INTEGER {noData(1), openingIndirectFile(2), downloadedIndirectFile(3), startDownloadImageFile(4), failedToDownloadImageFile(5), quitFileContentsLenZero(6), quitImageFileNameLenZero(7), quitVersionAlreadyUpdated(8), quitIndirectFileNotFound(9), quitImageFileNotFound(10), quitImageVersionNotSupported(11), quitNoTftpOutgoingInterface(12), quitUsbSetupFileOpenError(13), quitUsbSetupFileFormatError(14), quitUsbSetupFileReadWriteError(15), quitUsbSetupFileSetIpAddrError(16), quitUsbSetupFileImageFileNotExist(17), quitUsbSetupFileConfigFileNotExist(18)}read-onlycurrent
rlDhcpClAutoConfigForce
OBJECT-TYPE
Setting this MIB value to True will force DHCP auto-config process after next reboot. This configuration will take effect only during the time period between the next 2 reboots of the device (like a deffered action).
1.3.6.1.4.1.89.76.19TruthValueread-writecurrent
rlDhcpClAutoConfigAutoSave
OBJECT-TYPE
Setting this MIB value to True configures automatic saving of running-cdb into startup-cdb, to be done at the end of successful DHCP auto-config process to running-cdb.
1.3.6.1.4.1.89.76.20TruthValueread-writecurrent
rlDhcpClAutoConfigStatus
OBJECT-TYPE
Describes the status of current/last DHCP auto-config process.
1.3.6.1.4.1.89.76.21INTEGER {noData(1), openingDhcpConfigFile(2), openingIndirectFile(3), searchingHostnameInIndirectFile(4), openingHostnameConfigFile(5), openingHostnameCfgFile(6), openingDefaultConfigFile(7), downloadingConfigFile(8), savingConfigInStartupCDB(9), quitDhcpFileNotGivenOrNotExists(10), quitFailedToFindAnyExistingConfigFile(11), quitConfigFileContentsLenZero(12), quitConfigFileDownloadFailed(13), quitConditionsForAutoConfigChanged(14), quitSelectedConfigFileNameUpdateFailed(15), quitSelectedConfigFileNameOriginUpdateFailed(16), quitSelectedTftpServerAddressUpdateFailed(17), quitSelectedTftpServerAddressOriginUpdateFailed(18), quitCopyRunningToStartupFailed(19), quitNoTftpOutgoingInterface(20), finishedSuccessfully(21)}read-onlycurrent
rlDhcpClAutoConfigProtocol
OBJECT-TYPE
Describes the auto-config process protocol. tftp - only the TFTP protocol is used by auto-configuration. scp - only the SCP protocol is used by auto-configuration. auto-(Default) Auto-configuration uses the TFTP or SCP protocol depending on the configuration file's extension. If this option is selected, the extension parameter may be specified or, if not, the default extension is used.
1.3.6.1.4.1.89.76.22INTEGER {tftp(1), scp(2), auto(3)}read-writecurrent
rlDhcpClAutoConfigScpFileExtention
OBJECT-TYPE
Describes the SCP file extention. When no vlaue is specified, 'scp' extension is used.
1.3.6.1.4.1.89.76.23DisplayString (SIZE(0..128))read-writecurrent
rlDhcpClSelectedTftpServerInetAddressType
OBJECT-TYPE
Currently selected TFTP server Inet Address type.
1.3.6.1.4.1.89.76.24InetAddressTyperead-onlycurrent
rlDhcpClSelectedTftpServerInetAddress
OBJECT-TYPE
Currently selected TFTP server inet Address.
1.3.6.1.4.1.89.76.25InetAddressread-onlycurrent
rlDhcpClManualAutoConfigDataTable
OBJECT-TYPE
A table for configuring default values for auto-config/ auto-update process. These values during the process, in case no appropriate data was received from the DHCP server.
1.3.6.1.4.1.89.76.26not-accessiblecurrent
rlDhcpClManualAutoConfigDataEntry
OBJECT-TYPE
An entry (conceptual row) in rlDhcpClManualAutoConfigDataTable.
1.3.6.1.4.1.89.76.26.1not-accessiblecurrent
rlDhcpClManualAutoConfigDataIndex
OBJECT-TYPE
The index of this row. There is only one entry in this table, whose index is 1.
1.3.6.1.4.1.89.76.26.1.1INTEGERnot-accessiblecurrent
rlDhcpClManualServerInetAddressType
OBJECT-TYPE
Manually configured inet Address type of remote server.
1.3.6.1.4.1.89.76.26.1.2InetAddressTyperead-writecurrent
rlDhcpClManualServerInetAddress
OBJECT-TYPE
Manually configured inet Address of remote server.
1.3.6.1.4.1.89.76.26.1.3InetAddressread-writecurrent
rlDhcpClManualImageIndirectFileName
OBJECT-TYPE
Manually configured indirect file name, that holds the name of the image file to download.
1.3.6.1.4.1.89.76.26.1.4DisplayStringread-writecurrent
rlDhcpClInformationTable
OBJECT-TYPE
The (conceptual) table mentione IP address which must be released/renewed on the interface.
1.3.6.1.4.1.89.76.27not-accessiblecurrent
rlDhcpClInformationEntry
OBJECT-TYPE
An entry (conceptual row) in dhcpClActionTable.
1.3.6.1.4.1.89.76.27.1not-accessiblecurrent
rlDhcpClInformationIfIndex
OBJECT-TYPE
The DHCPv4 client informational table. Contains information received by DHCP client from DHCP server
1.3.6.1.4.1.89.76.27.1.1InterfaceIndexread-onlycurrent
rlDhcpClInformationIpAddress
OBJECT-TYPE
IP Address allocated by DHCP server.
1.3.6.1.4.1.89.76.27.1.2IpAddressread-onlycurrent
rlDhcpClInformationIpMask
OBJECT-TYPE
IP Address mask allocated by DHCP server.
1.3.6.1.4.1.89.76.27.1.3IpAddressread-onlycurrent
rlDhcpClInformationT1
OBJECT-TYPE
T1 timer value.
1.3.6.1.4.1.89.76.27.1.4Unsigned32read-onlycurrent
rlDhcpClInformationT2
OBJECT-TYPE
T2 timer value.
1.3.6.1.4.1.89.76.27.1.5Unsigned32read-onlycurrent
rlDhcpClInformationDefaultGateway
OBJECT-TYPE
Default Gateway IP Address.
1.3.6.1.4.1.89.76.27.1.6IpAddressread-onlycurrent
rlDhcpClInformationHostName
OBJECT-TYPE
Specifies the name of the client.
1.3.6.1.4.1.89.76.27.1.7SnmpAdminString (SIZE(0..160))read-onlycurrent
rlDhcpClInformationDomainName
OBJECT-TYPE
The Domain name received by DHCP client.
1.3.6.1.4.1.89.76.27.1.8DisplayString (SIZE(0..160))read-onlycurrent
rlDhcpClInformationTftpServerName
OBJECT-TYPE
The Tftp server name received by DHCP client.
1.3.6.1.4.1.89.76.27.1.9DisplayString (SIZE(0..160))read-onlycurrent
rlDhcpClInformationTftpFileName
OBJECT-TYPE
Name of file to use in configuration process received by DHCP client.
1.3.6.1.4.1.89.76.27.1.10DisplayString (SIZE(0..160))read-onlycurrent
rlDhcpClInformationTimeZone
OBJECT-TYPE
The timezone received by DHCP client.
1.3.6.1.4.1.89.76.27.1.11DisplayString (SIZE(0..64))read-onlycurrent
rlDhcpClInformationTftpImageName
OBJECT-TYPE
Image filename to use in autoupdate process received by DHCP client.
1.3.6.1.4.1.89.76.27.1.12DisplayString (SIZE(0..160))read-onlycurrent
rlDhcpClInformationDnsServerListTable
OBJECT-TYPE
The table saved the list of DNS servers received by DHCP client.
1.3.6.1.4.1.89.76.28not-accessiblecurrent
rlDhcpClInformationDnsServerListEntry
OBJECT-TYPE
An entry in rlDhcpClInformationDnsServerListTable.
1.3.6.1.4.1.89.76.28.1not-accessiblecurrent
rlDhcpClInformationDnsServerListIfIndex
OBJECT-TYPE
The IfIndex in rlDhcpClInformationDnsServerListEntry.
1.3.6.1.4.1.89.76.28.1.1InterfaceIndexnot-accessiblecurrent
rlDhcpClInformationDnsServerListPriority
OBJECT-TYPE
The priority of the entry.
1.3.6.1.4.1.89.76.28.1.2INTEGERnot-accessiblecurrent
rlDhcpClInformationDnsServerListAddress
OBJECT-TYPE
DNS server address received by DHCP client
1.3.6.1.4.1.89.76.28.1.3IpAddressread-onlycurrent
rlDhcpClInformationTftpServerListTable
OBJECT-TYPE
The table saved the list of Tftp servers received by DHCP client.
1.3.6.1.4.1.89.76.29not-accessiblecurrent
rlDhcpClInformationTftpServerListEntry
OBJECT-TYPE
An entry in rlDhcpClInformationTftpServerListTable.
1.3.6.1.4.1.89.76.29.1not-accessiblecurrent
rlDhcpClInformationTftpServerListIfIndex
OBJECT-TYPE
The IfIndex in rlDhcpClInformationTftpServerListEntry.
1.3.6.1.4.1.89.76.29.1.1InterfaceIndexnot-accessiblecurrent
rlDhcpClInformationTftpServerListPriority
OBJECT-TYPE
The priority of the entry.
1.3.6.1.4.1.89.76.29.1.2INTEGERnot-accessiblecurrent
rlDhcpClInformationTftpServerListAddress
OBJECT-TYPE
Tftp server address received by DHCP client
1.3.6.1.4.1.89.76.29.1.3IpAddressread-onlycurrent
rlDhcpClAutoUpdateProtocol
OBJECT-TYPE
Describes the auto-update process protocol. tftp - only the TFTP protocol is used by auto-update. scp - only the SCP protocol is used by auto-update. auto-(Default) Auto-update uses the TFTP or SCP protocol depending on the configuration file's extension. If this option is selected, the extension parameter may be specified or, if not, the default extension is used.
1.3.6.1.4.1.89.76.30INTEGER {tftp(1), scp(2), auto(3)}read-writecurrent
rlDhcpClAutoUpdateScpFileExtention
OBJECT-TYPE
Describes the SCP file extention used for auto-update. When no vlaue is specified, 'scp' extension is used.
1.3.6.1.4.1.89.76.31DisplayString (SIZE(0..128))read-writecurrent