Dell-AAA
- Registered at
- 1.3.6.1.4.1.89.79
- Last updated
- 2010-06-21 00:00
- Organization
- Dell
- Revisions
- 2010-06-21 00:00
- Namespace
- dell
- Source file
Dell-AAA- Digest
sha256:14d28d5f24350814ca625cd65470ac89b0782446d261e9c991c1a0dbd9490d89
Description
The private MIB module definition for Authentication, Authorization and Accounting in Dell devices.
Contact
www.dell.com
Imports
| From | Symbols |
|---|---|
| Dell-MIB | rlAAAEap, rlRadius, rnd |
| INET-ADDRESS-MIB | InetAddress, InetAddressIPv6, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
Dell-AAA Dell-MIB INET-ADDRESS-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| RlAAAAccountingMethod TEXTUAL-CONVENTION Protocols, used for accounting. | current | |||
| RlAAAEapMethodtype TEXTUAL-CONVENTION Method list type. | current | |||
| RlAAALinePortType TEXTUAL-CONVENTION Line physical port type,the rlAAAPortDontCare must be the maximum value in the enum. | current | |||
| RlAAAMethodtype TEXTUAL-CONVENTION Method list type. | current | |||
| RlAAAServiceType TEXTUAL-CONVENTION Line service type.rlAAAServiceTypeDontCare must be the maximum value in the enum. | current | |||
| RlTacacsConnectionStatus TEXTUAL-CONVENTION Specifies the status of TCP connection between device and TACACS+ server. | current | |||
| RlTacacsConnectionType TEXTUAL-CONVENTION Specifies TCP connection type between device and TACACS+ server | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| rlAAAMibVersion OBJECT-TYPE MIB's version, the current version is 3. The difference in rlAAACreationDateSystemPasswordLevel15 and rlAAALocalUserEntry. | 1.3.6.1.4.1.89.79.1 | INTEGER | read-only | current |
| rlAAARetries OBJECT-TYPE Determines the number of retries for each method (Radius, local passwords, local users table and tacacs). | 1.3.6.1.4.1.89.79.2 | INTEGER (1..5) | read-write | current |
| rlAAARadiusEnabled OBJECT-TYPE Specifies whether AAA will use Radius. When to use Radius exactly depends on its position in the methods list. | 1.3.6.1.4.1.89.79.3 | TruthValue | read-write | current |
| rlAAATacacsEnabled OBJECT-TYPE Specifies whether AAA will use Tacacs. When to use Tacacs exactly depends on its position in the methods list. | 1.3.6.1.4.1.89.79.4 | TruthValue | read-write | current |
| rlAAALocalUserEnabled OBJECT-TYPE Specifies whether AAA will use the local users table. When to use the table exactly depends on its position in the methods list. | 1.3.6.1.4.1.89.79.5 | TruthValue | read-write | current |
| rlAAASystemPasswordEnabled OBJECT-TYPE Specifies whether AAA will use the system password. When to use the passwords exactly depends on its position in the methods list. | 1.3.6.1.4.1.89.79.6 | TruthValue | read-write | current |
| rlAAALinePasswordEnabled OBJECT-TYPE Specifies whether AAA will use the line password. When to use the passwords exactly depends on its position in the methods list. | 1.3.6.1.4.1.89.79.7 | TruthValue | read-write | current |
| rlAAAAlwaysSuccessEnabled OBJECT-TYPE Specifies whether AAA will use the always success method. When to use that method exactly depends on its position in the methods list. | 1.3.6.1.4.1.89.79.8 | TruthValue | read-write | current |
| rlAAARadiusSupported OBJECT-TYPE This mib show whether Radius is supported in AAA. If the value is false Radius will not be used as an authentication and accounting method. If the value is true Radius will be used by AAA for authentication and accounting if the the AAA was configured to do so (by setting the appropriate mibs). | 1.3.6.1.4.1.89.79.9 | TruthValue | read-only | current |
| rlAAATacacsSupported OBJECT-TYPE This mib show whether Tacacs+ is supported in AAA. If the value is false Tacacs+ will not be used as an authentication and accounting method. If the value is true Tacacs+ will be used by AAA for authentication and accounting if the the AAA was configured to do so (by setting the appropriate mibs). | 1.3.6.1.4.1.89.79.10 | TruthValue | read-only | current |
| rlAAALocalUserSupported OBJECT-TYPE This mib show whether the local users db is supported in AAA.If the value is false the local users db will not be used as an authentication and accounting method. If the value is true the local users db will be used by AAA for authentication and accounting method if the the AAA was configured to do so (by setting the appropriate mibs). | 1.3.6.1.4.1.89.79.11 | TruthValue | read-only | current |
| rlAAASystemPasswordSupported OBJECT-TYPE This mib show whether system password is supported in AAA. If the value is false system password will not be used as an authentication and accounting method. If the value is true the system password will be used by AAA for authentication and accounting method if the the AAA was configured to do so (by setting the appropriate mibs). | 1.3.6.1.4.1.89.79.12 | TruthValue | read-only | current |
| rlAAALinePasswordSupported OBJECT-TYPE This mib show whether line password is supported in AAA. If the value is false line password will not be used as an authentication and accounting method. If the value is true the line password will be used by AAA for authentication and accounting method if the the AAA was configured to do so (by setting the appropriate mibs). | 1.3.6.1.4.1.89.79.13 | TruthValue | read-only | current |
| rlAAALineAlwaysSuccessSupported OBJECT-TYPE This mib show whether line always success method is supported in AAA.If the value is false always success method will not be used as an authentication and accounting method. If the value is true the always success method will be used by AAA for authentication and accounting method if the the AAA was configured to do so (by setting the appropriate mibs). | 1.3.6.1.4.1.89.79.14 | TruthValue | read-only | current |
| rlAAAMethodListTable OBJECT-TYPE The table specifies all methods list per method name. | 1.3.6.1.4.1.89.79.15 | not-accessible | current | |
| rlAAAMethodListEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.89.79.15.1 | not-accessible | current | |
| rlAAAMethodListName OBJECT-TYPE Line Method List Name | 1.3.6.1.4.1.89.79.15.1.1 | DisplayString (SIZE(3..20)) | read-write | current |
| rlAAAMethodType1 OBJECT-TYPE first method type that will be used in the method linked list. | 1.3.6.1.4.1.89.79.15.1.2 | RlAAAMethodtype | read-write | current |
| rlAAAMethodType2 OBJECT-TYPE second method type that will be used in the method linked list. | 1.3.6.1.4.1.89.79.15.1.3 | RlAAAMethodtype | read-write | current |
| rlAAAMethodType3 OBJECT-TYPE 3th method type that will be used in the method linked list. | 1.3.6.1.4.1.89.79.15.1.4 | RlAAAMethodtype | read-write | current |
| rlAAAMethodType4 OBJECT-TYPE 4th method type that will be used in the method linked list. | 1.3.6.1.4.1.89.79.15.1.5 | RlAAAMethodtype | read-write | current |
| rlAAAMethodType5 OBJECT-TYPE 5th method type that will be used in the method linked list. | 1.3.6.1.4.1.89.79.15.1.6 | RlAAAMethodtype | read-write | current |
| rlAAAMethodType6 OBJECT-TYPE 6th method type that will be used in the method linked list. | 1.3.6.1.4.1.89.79.15.1.7 | RlAAAMethodtype | read-write | current |
| rlAAAMethodType7 OBJECT-TYPE 7th method type that will be used in the method linked list. | 1.3.6.1.4.1.89.79.15.1.8 | RlAAAMethodtype | read-write | current |
| rlAAAMethodListStatus OBJECT-TYPE method list status can be destroy or createAndGo | 1.3.6.1.4.1.89.79.15.1.9 | RowStatus | read-write | current |
| rlAAAAuthorizeEnable OBJECT-TYPE flag that indicates whether authorizatoin is enabled | 1.3.6.1.4.1.89.79.15.1.10 | INTEGER | read-write | current |
| rlAAALineTable OBJECT-TYPE The table specifies all lines, their passwords and their authorizations level .the table ordered lexicography by the line name. when a new line is being authenticate the search in line table is from the first entry in table till it find the first entry that fit application input line parameters . | 1.3.6.1.4.1.89.79.16 | not-accessible | current | |
| rlAAALineEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.89.79.16.1 | not-accessible | current | |
| rlAAALinePortType OBJECT-TYPE the physical port type . | 1.3.6.1.4.1.89.79.16.1.1 | RlAAALinePortType | read-write | current |
| rlAAAIfIndex OBJECT-TYPE Identifies the ifindex for which this entry can be used. If index 0 means don't care (can be used for all if indices). For port type console the value could be only 0. | 1.3.6.1.4.1.89.79.16.1.2 | Unsigned32 | read-write | current |
| rlAAAServiceType OBJECT-TYPE the service type | 1.3.6.1.4.1.89.79.16.1.3 | RlAAAServiceType | read-write | current |
| rlAAALineMethodListNameLevel1 OBJECT-TYPE Method list Name for level 1 .That name points to the method list table .It is the key in method list table .in that way we can reach the methods list to be used for that line | 1.3.6.1.4.1.89.79.16.1.4 | DisplayString (SIZE(0..20)) | read-write | current |
| rlAAALineMethodListNameLevel2 OBJECT-TYPE Method list Name for level 2 that name points to the method list table it is the key in method list table .by that way we can reach the methods list to be used for that line | 1.3.6.1.4.1.89.79.16.1.5 | DisplayString (SIZE(0..20)) | read-write | current |
| rlAAALineMethodListNameLevel3 OBJECT-TYPE Method list Name for level 3 that name points to the method list table it is the key in method list table .by that way we can reach the methods list to be used for this line | 1.3.6.1.4.1.89.79.16.1.6 | DisplayString (SIZE(0..20)) | read-write | current |
| rlAAALineMethodListNameLevel4 OBJECT-TYPE Method list Name for level 4-that name points to the method list table it is the key in method list table .by that way we can reach the methods list to be used for this line | 1.3.6.1.4.1.89.79.16.1.7 | DisplayString (SIZE(0..20)) | read-write | current |
| rlAAALineMethodListNameLevel5 OBJECT-TYPE Method list Name for level 5 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line | 1.3.6.1.4.1.89.79.16.1.8 | DisplayString (SIZE(0..20)) | read-write | current |
| rlAAALineMethodListNameLevel6 OBJECT-TYPE Method list Name for level 6 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line | 1.3.6.1.4.1.89.79.16.1.9 | DisplayString (SIZE(0..20)) | read-write | current |
| rlAAALineMethodListNameLevel7 OBJECT-TYPE Method list Name for level 7 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line | 1.3.6.1.4.1.89.79.16.1.10 | DisplayString (SIZE(0..20)) | read-write | current |
| rlAAALineMethodListNameLevel8 OBJECT-TYPE Method list Name for level 8 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line | 1.3.6.1.4.1.89.79.16.1.11 | DisplayString (SIZE(0..20)) | read-write | current |
| rlAAALineMethodListNameLevel9 OBJECT-TYPE Method list Name for level 9 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line | 1.3.6.1.4.1.89.79.16.1.12 | DisplayString (SIZE(0..20)) | read-write | current |
| rlAAALineMethodListNameLevel10 OBJECT-TYPE Method list Name for level 10 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line | 1.3.6.1.4.1.89.79.16.1.13 | DisplayString (SIZE(0..20)) | read-write | current |
| rlAAALineMethodListNameLevel11 OBJECT-TYPE Method list Name for level 11 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line | 1.3.6.1.4.1.89.79.16.1.14 | DisplayString (SIZE(0..20)) | read-write | current |
| rlAAALineMethodListNameLevel12 OBJECT-TYPE Method list Name for level 12 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line | 1.3.6.1.4.1.89.79.16.1.15 | DisplayString (SIZE(0..20)) | read-write | current |
| rlAAALineMethodListNameLevel13 OBJECT-TYPE Method list Name for level 13 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line | 1.3.6.1.4.1.89.79.16.1.16 | DisplayString (SIZE(0..20)) | read-write | current |
| rlAAALineMethodListNameLevel14 OBJECT-TYPE Method list Name for level 14 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line | 1.3.6.1.4.1.89.79.16.1.17 | DisplayString (SIZE(0..20)) | read-write | current |
| rlAAALineMethodListNameLevel15 OBJECT-TYPE Method list Name for level 15 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line | 1.3.6.1.4.1.89.79.16.1.18 | DisplayString (SIZE(0..20)) | read-write | current |
| rlAAALinePassword OBJECT-TYPE Line Password. Zero length password is considered as no password. Password with zero length means that in case this password is the method to be used a method fail is returned and no other method is being used. allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | 1.3.6.1.4.1.89.79.16.1.19 | DisplayString (SIZE(0..160)) | read-write | current |
| rlAAALineStatus OBJECT-TYPE Line status can be destroy or createAndGo | 1.3.6.1.4.1.89.79.16.1.20 | RowStatus | read-write | current |
| rlAAALineLockedState OBJECT-TYPE Line locked status | 1.3.6.1.4.1.89.79.16.1.21 | INTEGER {locked(0), usable(1)} | read-only | current |
| rlAAALineConsFailedLogins OBJECT-TYPE Number of last consecutive failed logins | 1.3.6.1.4.1.89.79.16.1.22 | Counter32 | read-only | current |
| rlAAALinePasswordValidTime OBJECT-TYPE The period of time in days, during which the password, is considered valid for login. Value of 0 means never expired. The actual range is product specific. After this time the system may allow limited number of logins to change the password. | 1.3.6.1.4.1.89.79.16.1.23 | Unsigned32 | read-write | current |
| rlAAALinePasswordExpieryDate OBJECT-TYPE If Line password aging is active, the date on which The current password will expire. Otherwise zero size string | 1.3.6.1.4.1.89.79.16.1.24 | DisplayString | read-only | current |
| rlAAALocalUserTable OBJECT-TYPE The table specifies all usernames, their passwords and their authorizations. | 1.3.6.1.4.1.89.79.17 | not-accessible | current | |
| rlAAALocalUserEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.89.79.17.1 | not-accessible | current | |
| rlAAALocalUserName OBJECT-TYPE Local User Name | 1.3.6.1.4.1.89.79.17.1.1 | DisplayString (SIZE(1..20)) | read-write | current |
| rlAAALocalUserPassword OBJECT-TYPE Local User Password .The password can be null allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | 1.3.6.1.4.1.89.79.17.1.2 | DisplayString (SIZE(0..160)) | read-write | current |
| rlAAALocalUserPrivilage OBJECT-TYPE Local User Privilage | 1.3.6.1.4.1.89.79.17.1.3 | INTEGER (1..15) | read-write | current |
| rlAAALocalHostStatus OBJECT-TYPE Local User status | 1.3.6.1.4.1.89.79.17.1.4 | RowStatus | read-write | current |
| rlAAALocalLockedState OBJECT-TYPE Local User locked status | 1.3.6.1.4.1.89.79.17.1.5 | INTEGER {locked(0), usable(1)} | read-only | current |
| rlAAALocalConsFailedLogins OBJECT-TYPE Number of last consecutive failed logins | 1.3.6.1.4.1.89.79.17.1.6 | Counter32 | read-only | current |
| rlAAALocalPasswordValidTime OBJECT-TYPE The period of time in days, during which the password, is considered valid for login. Value of 0 means never expired. The actual range is product specific. After this time the system may allow limited number of logins to change the password. | 1.3.6.1.4.1.89.79.17.1.7 | Unsigned32 | read-write | current |
| rlAAALocalPasswordExpieryDate OBJECT-TYPE If User password aging is active, the date on which The current password will expire. Otherwise zero size string | 1.3.6.1.4.1.89.79.17.1.8 | DisplayString | read-only | current |
| rlAAALocalPasswordCreationDate OBJECT-TYPE The date on which the current password was created. Otherwise zero size string | 1.3.6.1.4.1.89.79.17.1.9 | DisplayString | read-only | current |
| rlAAASystemPasswordlevel1 OBJECT-TYPE system Password for level 1. allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | 1.3.6.1.4.1.89.79.18 | DisplayString (SIZE(0..160)) | read-write | current |
| rlAAASystemPasswordlevel2 OBJECT-TYPE system Password for level 2 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | 1.3.6.1.4.1.89.79.19 | DisplayString (SIZE(0..160)) | read-write | current |
| rlAAASystemPasswordlevel3 OBJECT-TYPE system Password for level 3 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | 1.3.6.1.4.1.89.79.20 | DisplayString (SIZE(0..160)) | read-write | current |
| rlAAASystemPasswordlevel4 OBJECT-TYPE system Password for level 4 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | 1.3.6.1.4.1.89.79.21 | DisplayString (SIZE(0..160)) | read-write | current |
| rlAAASystemPasswordlevel5 OBJECT-TYPE system Password for level 5 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | 1.3.6.1.4.1.89.79.22 | DisplayString (SIZE(0..160)) | read-write | current |
| rlAAASystemPasswordlevel6 OBJECT-TYPE system Password for level 6 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | 1.3.6.1.4.1.89.79.23 | DisplayString (SIZE(0..160)) | read-write | current |
| rlAAASystemPasswordlevel7 OBJECT-TYPE system Password for level 7 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | 1.3.6.1.4.1.89.79.24 | DisplayString (SIZE(0..160)) | read-write | current |
| rlAAASystemPasswordlevel8 OBJECT-TYPE system Password for level 8 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | 1.3.6.1.4.1.89.79.25 | DisplayString (SIZE(0..160)) | read-write | current |
| rlAAASystemPasswordlevel9 OBJECT-TYPE system Password for level 9 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | 1.3.6.1.4.1.89.79.26 | DisplayString (SIZE(0..160)) | read-write | current |
| rlAAASystemPasswordlevel10 OBJECT-TYPE system Password for level 10 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | 1.3.6.1.4.1.89.79.27 | DisplayString (SIZE(0..160)) | read-write | current |
| rlAAASystemPasswordlevel11 OBJECT-TYPE system Password for level 11 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | 1.3.6.1.4.1.89.79.28 | DisplayString (SIZE(0..160)) | read-write | current |
| rlAAASystemPasswordlevel12 OBJECT-TYPE system Password for level 12 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | 1.3.6.1.4.1.89.79.29 | DisplayString (SIZE(0..160)) | read-write | current |
| rlAAASystemPasswordlevel13 OBJECT-TYPE system Password for level 13 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | 1.3.6.1.4.1.89.79.30 | DisplayString (SIZE(0..160)) | read-write | current |
| rlAAASystemPasswordlevel14 OBJECT-TYPE system Password for level 14 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | 1.3.6.1.4.1.89.79.31 | DisplayString (SIZE(0..160)) | read-write | current |
| rlAAASystemPasswordlevel15 OBJECT-TYPE system Password for level 15 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not part of it | 1.3.6.1.4.1.89.79.32 | DisplayString (SIZE(0..160)) | read-write | current |
| rlAAAUserTable OBJECT-TYPE The table holds all current users that have been authenticated. | 1.3.6.1.4.1.89.79.33 | not-accessible | current | |
| rlAAAUserEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.89.79.33.1 | not-accessible | current | |
| rlAAAUserIndex OBJECT-TYPE User Index | 1.3.6.1.4.1.89.79.33.1.1 | Unsigned32 | not-accessible | current |
| rlAAAUserServiceType OBJECT-TYPE The service that the user uses. Service dont care is console terminal. | 1.3.6.1.4.1.89.79.33.1.2 | RlAAAServiceType | read-only | current |
| rlAAAUserRemoteIpAddress OBJECT-TYPE User remote IP address. | 1.3.6.1.4.1.89.79.33.1.3 | IpAddress | read-only | current |
| rlAAAUserName OBJECT-TYPE User Name | 1.3.6.1.4.1.89.79.33.1.4 | DisplayString | read-only | current |
| rlAAAUserLevel OBJECT-TYPE User level | 1.3.6.1.4.1.89.79.33.1.5 | Unsigned32 (1..15) | read-only | current |
| rlAAAUserIfIndex OBJECT-TYPE User if index. | 1.3.6.1.4.1.89.79.33.1.6 | Unsigned32 | read-only | current |
| rlAAAUserLoginDate OBJECT-TYPE Date of use creation. | 1.3.6.1.4.1.89.79.33.1.7 | DateAndTime | read-only | current |
| rlAAAUserLoginDurationMS OBJECT-TYPE Time in MS since user login. | 1.3.6.1.4.1.89.79.33.1.8 | Unsigned32 | read-only | current |
| rlAAATest OBJECT-IDENTITY | 1.3.6.1.4.1.89.79.34 | |||
| rlAAATestPassword OBJECT-TYPE This variable enables the user supplying the correct code to use the AAA test feature. | 1.3.6.1.4.1.89.79.34.1 | INTEGER | read-write | current |
| rlAAATestUserTable OBJECT-TYPE This table enables a user to perform a simulation of authentiction. | 1.3.6.1.4.1.89.79.34.2 | not-accessible | current | |
| rlAAATestUserEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.89.79.34.2.1 | not-accessible | current | |
| rlAAATestUserIndex OBJECT-TYPE User entry index (the number is used just to identify the user). | 1.3.6.1.4.1.89.79.34.2.1.1 | Unsigned32 | read-write | current |
| rlAAATestPortType OBJECT-TYPE the physical port type . | 1.3.6.1.4.1.89.79.34.2.1.2 | RlAAALinePortType | read-write | current |
| rlAAATestIfIndex OBJECT-TYPE line ifIndex can configue to be zero witch means Don't-care value | 1.3.6.1.4.1.89.79.34.2.1.3 | INTEGER | read-write | current |
| rlAAATestServiceType OBJECT-TYPE the service type | 1.3.6.1.4.1.89.79.34.2.1.4 | RlAAAServiceType | read-write | current |
| rlAAATestUserAuthenticationStatus OBJECT-TYPE Shows the ststus of the operation and what is expected from the 'user'. | 1.3.6.1.4.1.89.79.34.2.1.5 | INTEGER {needPassword(1), needUsername(2), success(3), failure(4), aborted(5), deleted(6), waiting(7), usedNewMethod(8)} | read-only | current |
| rlAAATestUserAuthenticationAction OBJECT-TYPE By setting this field the process moves from one state to another. On creation the value must be begin. When the value of rlAAATestUserAuthenticationStatus is needPassword the value can be set to receivePassword or abort. When the value of rlAAATestUserAuthenticationStatus is needUsername the value can be set to receiveUsername or abort. When the value of rlAAATestUserAuthenticationStatus is success or failure the value can be set to delete or abort. When the value of rlAAATestUserAuthenticationStatus is aborted the value can be set to delete. When the value of rlAAATestUserAuthenticationStatus is deleted the value can not be set to any value. When the value of rlAAATestUserAuthenticationStatus is waiting the value can be set or abort. | 1.3.6.1.4.1.89.79.34.2.1.6 | INTEGER {begin(1), receivePassword(2), receiveUsername(3), abort(4), delete(5), continue(6)} | read-write | current |
| rlAAATestUserInput OBJECT-TYPE If the acion was set to receivePassword than this field should hold the value of the password. If the action was set to receiveUsername than this field should hold the value of the username. | 1.3.6.1.4.1.89.79.34.2.1.7 | DisplayString (SIZE(0..160)) | read-write | current |
| rlAAATestUserStatus OBJECT-TYPE Entry status. The entry can not be deleted. It will be deleted if unchanged more than 2 minutes. | 1.3.6.1.4.1.89.79.34.2.1.8 | RowStatus | read-write | current |
| rlTacacs OBJECT-IDENTITY | 1.3.6.1.4.1.89.79.40 | |||
| rlTacacsMibVersion OBJECT-TYPE MIB's version, the current version is 1. | 1.3.6.1.4.1.89.79.40.1 | INTEGER | read-only | current |
| rlTacacsGlobalDefaultTimeout OBJECT-TYPE The maximum time (in seconds) to wait for TACACS+ server to reply. This MIB is used if the value of the field rlTacacsServerTimeout is 0. | 1.3.6.1.4.1.89.79.40.2 | INTEGER (1..30) | read-write | current |
| rlTacacsGlobalDefaultKey OBJECT-TYPE Secret key to be shared with TACACS+ server. This MIB is used if the value of the field rlTacacsServerUseGlobalDefaultKey is false. | 1.3.6.1.4.1.89.79.40.3 | DisplayString (SIZE(0..128)) | read-write | current |
| rlTacacsGlobalDefaultSourceIpInterface OBJECT-TYPE IP address of the interface to use with TACACS+ server. A value of 0.0.0.0 for this object disables source address specification. This MIB is used if the value of the field rlTacacsServerSource is 255.255.255.255. | 1.3.6.1.4.1.89.79.40.6 | IpAddress | read-write | current |
| rlTacacsServerTable OBJECT-TYPE The (conceptual) table listing the TACACS+ servers with which the cliient shares a secret. | 1.3.6.1.4.1.89.79.40.7 | not-accessible | current | |
| rlTacacsServerEntry OBJECT-TYPE An entry (conceptual row) representing a TACACS+ server with which the client shares a secret. | 1.3.6.1.4.1.89.79.40.7.1 | not-accessible | current | |
| rlTacacsServerAddress OBJECT-TYPE The IP address of the TACACS+ server referred to in this table entry. | 1.3.6.1.4.1.89.79.40.7.1.1 | IpAddress | read-write | current |
| rlTacacsServerPortNumber OBJECT-TYPE The TCP port the client establishes connections with this server. | 1.3.6.1.4.1.89.79.40.7.1.2 | INTEGER (0..65535) | read-write | current |
| rlTacacsServerConnectionType OBJECT-TYPE Specifies TCP connection type between device and TACACS+ server. Either a single open connection between device and server (rlTacacsSingleConnection), or open/close connection per communication session (rlTacacsPerSessionConnection). | 1.3.6.1.4.1.89.79.40.7.1.3 | RlTacacsConnectionType | read-write | current |
| rlTacacsServerConnectionStatus OBJECT-TYPE Specifies status TCP connection type between device and TACACS+ server. | 1.3.6.1.4.1.89.79.40.7.1.4 | RlTacacsConnectionStatus | read-only | current |
| rlTacacsServerTimeout OBJECT-TYPE The maximum time (in seconds) to wait for this TACACS+ server to reply. Value of 0 means that rlTacacsGlobalDefaultTimeout value is used. | 1.3.6.1.4.1.89.79.40.7.1.5 | INTEGER (0..30) | read-write | current |
| rlTacacsServerUseGlobalDefaultKey OBJECT-TYPE If this field is set to true the value in field rlTacacsServerKey is ignored and instead the value in the MIB rlTacacsGlobalDefaultKey is used. Otherwise the value in rlTacacsServerKey is used. | 1.3.6.1.4.1.89.79.40.7.1.6 | TruthValue | read-write | current |
| rlTacacsServerKey OBJECT-TYPE Secret key to be shared with this TACACS+ server. | 1.3.6.1.4.1.89.79.40.7.1.7 | DisplayString (SIZE(0..128)) | read-write | current |
| rlTacacsServerSourceIpInterface OBJECT-TYPE IP address of the interface to use with this server. A value of 0.0.0.0 for this object disables source address specification. Value of 255.255.255.255 means that rlTacacsGlobalDefaultSourceIpInterface will be used. | 1.3.6.1.4.1.89.79.40.7.1.8 | IpAddress | read-write | current |
| rlTacacsServerPriority OBJECT-TYPE Determines the order in which the TACACS+ servers will be used, when 0 is the highest priority. If more than one server share the same priority - they will be used in lexicgoraphic order (the order of entries in this table). | 1.3.6.1.4.1.89.79.40.7.1.9 | INTEGER (0..65535) | read-write | current |
| rlTacacsServerRowStatus OBJECT-TYPE | 1.3.6.1.4.1.89.79.40.7.1.10 | RowStatus | read-write | current |
| rlTacacsGlobalDefaultSourceIPv6Interface OBJECT-TYPE IP address of the interface to use with TACACS+ server. A NULL for this object disables source address specification. This MIB is used if the value of the field rlTacacsServerInetSourceInterface is 255.255.255.255. | 1.3.6.1.4.1.89.79.40.8 | InetAddressIPv6 | read-write | current |
| rlTacacsServerInetTable OBJECT-TYPE The (conceptual) table listing the TACACS+ servers with which the cliient shares a secret. | 1.3.6.1.4.1.89.79.40.9 | not-accessible | current | |
| rlTacacsServerInetEntry OBJECT-TYPE An entry (conceptual row) representing a TACACS+ server with which the client shares a secret. | 1.3.6.1.4.1.89.79.40.9.1 | not-accessible | current | |
| rlTacacsServerInetAddressType OBJECT-TYPE The Inet address type of TACACS+ server reffered to in this table entry .IPv6Z type is not supported. | 1.3.6.1.4.1.89.79.40.9.1.1 | InetAddressType | read-write | current |
| rlTacacsServerInetAddress OBJECT-TYPE The Inet Address address of the TACACS+ server referred to in this table entry. | 1.3.6.1.4.1.89.79.40.9.1.2 | InetAddress | read-write | current |
| rlTacacsServerInetPortNumber OBJECT-TYPE The TCP port the client establishes connections with this server. | 1.3.6.1.4.1.89.79.40.9.1.3 | INTEGER (0..65535) | read-write | current |
| rlTacacsServerInetConnectionType OBJECT-TYPE Specifies TCP connection type between device and TACACS+ server. Either a single open connection between device and server (rlTacacsSingleConnection), or open/close connection per communication session (rlTacacsPerSessionConnection). | 1.3.6.1.4.1.89.79.40.9.1.4 | RlTacacsConnectionType | read-write | current |
| rlTacacsServerInetConnectionStatus OBJECT-TYPE Specifies status TCP connection type between device and TACACS+ server. | 1.3.6.1.4.1.89.79.40.9.1.5 | RlTacacsConnectionStatus | read-only | current |
| rlTacacsServerInetTimeout OBJECT-TYPE The maximum time (in seconds) to wait for this TACACS+ server to reply. Value of 0 means that rlTacacsGlobalDefaultTimeout value is used. | 1.3.6.1.4.1.89.79.40.9.1.6 | INTEGER (0..30) | read-write | current |
| rlTacacsServerInetUseGlobalDefaultKey OBJECT-TYPE If this field is set to true the value in field rlTacacsServerKey is ignored and instead the value in the MIB rlTacacsGlobalDefaultKey is used. Otherwise the value in rlTacacsServerKey is used. | 1.3.6.1.4.1.89.79.40.9.1.7 | TruthValue | read-write | current |
| rlTacacsServerInetKey OBJECT-TYPE Secret key to be shared with this TACACS+ server. | 1.3.6.1.4.1.89.79.40.9.1.8 | DisplayString (SIZE(0..128)) | read-write | current |
| rlTacacsServerInetSourceInterfaceType OBJECT-TYPE The Inet address type of the interface to use with this server. | 1.3.6.1.4.1.89.79.40.9.1.9 | InetAddressType | read-write | current |
| rlTacacsServerInetSourceInterface OBJECT-TYPE Inet address of the interface to use with this server. A value of NULL for this object disables source address specification for this server. A value of 255.255.255.255 maens that the global default rlTacacsGlobalDefaultSourceIpInterface or rlTacacsGlobalDefaultSourceIPv6Interface values are used. | 1.3.6.1.4.1.89.79.40.9.1.10 | InetAddress | read-write | current |
| rlTacacsServerInetPriority OBJECT-TYPE Determines the order in which the TACACS+ servers will be used, when 0 is the highest priority. If more than one server share the same priority - they will be used in lexicgoraphic order (the order of entries in this table). | 1.3.6.1.4.1.89.79.40.9.1.11 | INTEGER (0..65535) | read-write | current |
| rlTacacsServerInetRowStatus OBJECT-TYPE | 1.3.6.1.4.1.89.79.40.9.1.12 | RowStatus | read-write | current |
| rlAAAAuditingEnable OBJECT-TYPE Controls whether SysLog messages should be issued on login events | 1.3.6.1.4.1.89.79.41 | TruthValue | read-write | current |
| rlAAAMinPasswordLength OBJECT-TYPE The minimum length of password for local user authentication defined in field rlAAALocalUserPassword in rlAAALocalUserTable. The value applies only to new or updated user passwords. In actual implementation the range may be reduced to (0 | N-64), where N is a platform dependent (for TIC compatibility N=8) | 1.3.6.1.4.1.89.79.42 | INTEGER (0..64) | read-write | current |
| rlAAAPasswordHistSize OBJECT-TYPE The number of most recent password, previously defined for Local User Table, Line Table, System Password Table for specific entity. This list used for password reusing prevention. Value of 0 means none. Changing the value does not cause the loss of history. History Max size is product specific. | 1.3.6.1.4.1.89.79.43 | Unsigned32 | read-write | current |
| rlAAAPasswordHistHoldTime OBJECT-TYPE The time in day, which an old password may be used in password history check. Changing the value does not cause the loss of history. | 1.3.6.1.4.1.89.79.44 | Unsigned32 | read-write | current |
| rlAAASuccLoginWriteToFile OBJECT-TYPE Controls whether successful logins are written to login file | 1.3.6.1.4.1.89.79.45 | TruthValue | read-write | current |
| rlAAALocalLoginHistTable OBJECT-TYPE The table holds successful login history for all users. This table is read-only. | 1.3.6.1.4.1.89.79.46 | not-accessible | current | |
| rlAAALocalLoginHistEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.89.79.46.1 | not-accessible | current | |
| rlAAALocalLoginHistName OBJECT-TYPE User Name | 1.3.6.1.4.1.89.79.46.1.1 | DisplayString | read-only | current |
| rlAAALocalLoginHistIndex OBJECT-TYPE Index in History for specific user. Lower number means more recent login. | 1.3.6.1.4.1.89.79.46.1.2 | Unsigned32 (1..10) | not-accessible | current |
| rlAAALocalLoginHistServiceType OBJECT-TYPE The service that the user uses. Service don't care is console terminal. | 1.3.6.1.4.1.89.79.46.1.3 | RlAAAServiceType | read-only | current |
| rlAAALocalLoginHistRemoteIpAddress OBJECT-TYPE User remote IP address. | 1.3.6.1.4.1.89.79.46.1.4 | IpAddress | read-only | current |
| rlAAALocalLoginHistLocalIpAddress OBJECT-TYPE local Ip Address on login. | 1.3.6.1.4.1.89.79.46.1.5 | IpAddress | read-only | current |
| rlAAALocalLoginDateTime OBJECT-TYPE Date and time in the SysLog Format: DD-MMM-YYYY HH:MM:SS | 1.3.6.1.4.1.89.79.46.1.6 | DisplayString | read-only | current |
| rlAAALocalLoginMrid OBJECT-TYPE Mrid - indicates to which instance the connection was established | 1.3.6.1.4.1.89.79.46.1.7 | Unsigned32 | read-only | current |
| rlAAALinePassLoginHistTable OBJECT-TYPE The table holds successful login history for Line passwords. This table is read-only. | 1.3.6.1.4.1.89.79.47 | not-accessible | current | |
| rlAAALinePassLoginHistEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.89.79.47.1 | not-accessible | current | |
| rlAAALinePassLoginHistPortType OBJECT-TYPE the physical port type. | 1.3.6.1.4.1.89.79.47.1.1 | RlAAALinePortType | read-write | current |
| rlAAALinePassLoginHistIfIndex OBJECT-TYPE Identifies the ifindex for which this entry can be used. If index 0 means don't care (can be used for all if indices). For port type console the value could be only 0. | 1.3.6.1.4.1.89.79.47.1.2 | Unsigned32 | read-write | current |
| rlAAALinePassLoginHistServiceType OBJECT-TYPE the service type | 1.3.6.1.4.1.89.79.47.1.3 | RlAAAServiceType | read-write | current |
| rlAAALinePassLoginHistIndex OBJECT-TYPE Index in History for specific user. Lower number means more recent login. | 1.3.6.1.4.1.89.79.47.1.4 | Unsigned32 (1..10) | not-accessible | current |
| rlAAALinePassLoginHistActServiceType OBJECT-TYPE The service that the user uses. Service don't care is console terminal. | 1.3.6.1.4.1.89.79.47.1.5 | RlAAAServiceType | read-only | current |
| rlAAALinePassLoginHistRemoteIpAddress OBJECT-TYPE User remote IP address. | 1.3.6.1.4.1.89.79.47.1.6 | IpAddress | read-only | current |
| rlAAALinePassLoginHistLocalIpAddress OBJECT-TYPE local Ip Address on login. | 1.3.6.1.4.1.89.79.47.1.7 | IpAddress | read-only | current |
| rlAAALinePassLoginDateTime OBJECT-TYPE Date and time in the SysLog Format: DD-MMM-YYYY HH:MM:SS | 1.3.6.1.4.1.89.79.47.1.8 | DisplayString | read-only | current |
| rlAAALinePassLoginMrid OBJECT-TYPE Mrid - indicates to which instance the connection was established | 1.3.6.1.4.1.89.79.47.1.9 | Unsigned32 | read-only | current |
| rlAAASystemLoginHistTable OBJECT-TYPE The table holds successful login history for system passwords. This table is read-only. | 1.3.6.1.4.1.89.79.48 | not-accessible | current | |
| rlAAASystemLoginHistEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.89.79.48.1 | not-accessible | current | |
| rlAAASystemLoginHistLevel OBJECT-TYPE User Name | 1.3.6.1.4.1.89.79.48.1.1 | INTEGER (1..15) | read-only | current |
| rlAAASystemLoginHistIndex OBJECT-TYPE Index in History for specific user. Lower number means more recent login. | 1.3.6.1.4.1.89.79.48.1.2 | Unsigned32 (1..10) | not-accessible | current |
| rlAAASystemLoginHistServiceType OBJECT-TYPE The service that the user uses. Service don't care is console terminal. | 1.3.6.1.4.1.89.79.48.1.3 | RlAAAServiceType | read-only | current |
| rlAAASystemLoginHistRemoteIpAddress OBJECT-TYPE User remote IP address. | 1.3.6.1.4.1.89.79.48.1.4 | IpAddress | read-only | current |
| rlAAASystemLoginHistLocalIpAddress OBJECT-TYPE local Ip Address on login. | 1.3.6.1.4.1.89.79.48.1.5 | IpAddress | read-only | current |
| rlAAASystemLoginDateTime OBJECT-TYPE Date and time in the SysLog Format: DD-MMM-YYYY HH:MM:SS | 1.3.6.1.4.1.89.79.48.1.6 | DisplayString | read-only | current |
| rlAAASystemLoginMrid OBJECT-TYPE Mrid - indicates to which instance the connection was established | 1.3.6.1.4.1.89.79.48.1.7 | Unsigned32 | read-only | current |
| rlAAASysPassStatTable OBJECT-TYPE The table specifies all system password and their security properties: is password locked due to wrong password, when and how it was locked or last unsuccessful login information, expiry date of the password. | 1.3.6.1.4.1.89.79.49 | not-accessible | current | |
| rlAAASysPassStatEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.89.79.49.1 | not-accessible | current | |
| rlAAASysPassStatLevel OBJECT-TYPE System password level | 1.3.6.1.4.1.89.79.49.1.1 | INTEGER (1..15) | read-only | current |
| rlAAASysPassStatLockedState OBJECT-TYPE System password locked status | 1.3.6.1.4.1.89.79.49.1.2 | INTEGER {locked(0), usable(1)} | read-only | current |
| rlAAASysPassStatConsFailedLogins OBJECT-TYPE Number of last consecutive failed logins | 1.3.6.1.4.1.89.79.49.1.3 | Counter32 | read-only | current |
| rlAAASysPassStatPasswordValidTime OBJECT-TYPE The period of time in days, during which the password, is considered valid for login. Value of 0 means never expired. The actual range is product specific. After this time the system may allow limited number of logins to change the password. | 1.3.6.1.4.1.89.79.49.1.4 | Unsigned32 | read-write | current |
| rlAAASysPassStatPasswordExpieryDate OBJECT-TYPE If System password aging is active, the date, on which the current password will expire. Otherwise zero size string | 1.3.6.1.4.1.89.79.49.1.5 | DisplayString | read-only | current |
| rlAAAMaxNumLogAttmpts OBJECT-TYPE The number of consecutive unsuccessful login attempts before user is locked. Value of 0 means no limit. The actual range is product specific. TIC requirement is 3. | 1.3.6.1.4.1.89.79.50 | INTEGER | read-write | current |
| rlAAAUnlockUserName OBJECT-TYPE An action MIB variable setting with value of Local User Name will unlock this user. The value of this variable is not saved to non volatile storage. Read of this variable always returns zero length display string. | 1.3.6.1.4.1.89.79.51 | DisplayString (SIZE(0..20)) | read-write | current |
| rlAAAUnlockSystemPassword OBJECT-TYPE An action MIB variable setting with value of Level will unlock the system password for this level. The value of this variable is not saved to non volatile storage. Read of this variable always returns zero. Zero (0) does no action. | 1.3.6.1.4.1.89.79.52 | INTEGER (0..15) | read-write | current |
| rlAAALockedLineTable OBJECT-TYPE The table specifies lines statuses. Users cannot access the product from remote based on a password of the locked line. This table enables to unlock lines. | 1.3.6.1.4.1.89.79.53 | not-accessible | current | |
| rlAAALockedLineEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.89.79.53.1 | not-accessible | current | |
| rlAAALockedLinePortType OBJECT-TYPE the physical port type . | 1.3.6.1.4.1.89.79.53.1.1 | RlAAALinePortType | read-write | current |
| rlAAALockedLineIfIndex OBJECT-TYPE Identifies the ifindex for which this entry can be used. If index 0 means don't care (can be used for all if indices). For port type console the value could be only 0. | 1.3.6.1.4.1.89.79.53.1.2 | Unsigned32 | read-write | current |
| rlAAALockedLineServiceType OBJECT-TYPE the service type | 1.3.6.1.4.1.89.79.53.1.3 | RlAAAServiceType | read-write | current |
| rlAAALockedLineStatus OBJECT-TYPE The entry exists only if a line exist. Setting this field to value usable results in resetting the password failure counter, and unlock a locked user. | 1.3.6.1.4.1.89.79.53.1.4 | INTEGER {locked(0), usable(1)} | read-write | current |
| rlAAASystemPasswordVerificationAndSettingTable OBJECT-TYPE The table specifies per every system level, old and new passwords. Serves for verification the old password and setting a new password. | 1.3.6.1.4.1.89.79.54 | not-accessible | current | |
| rlAAASystemPasswordVerificationAndSettingEntry OBJECT-TYPE The row of system password verification and setting table. | 1.3.6.1.4.1.89.79.54.1 | not-accessible | current | |
| rlAAASystemPasswordSettingPrivilegeLevel OBJECT-TYPE System password Privelege Level to be set. | 1.3.6.1.4.1.89.79.54.1.1 | INTEGER (1..15) | not-accessible | current |
| rlAAASystemPasswordVerificationOldPassword OBJECT-TYPE Old system password to be verified. | 1.3.6.1.4.1.89.79.54.1.2 | DisplayString | read-write | current |
| rlAAASystemPasswordSettingNewPassword OBJECT-TYPE New system password to be set. | 1.3.6.1.4.1.89.79.54.1.3 | DisplayString | read-write | current |
| rlAAASystemPasswordConfirmNewPassword OBJECT-TYPE New system password to be confirmed. | 1.3.6.1.4.1.89.79.54.1.4 | DisplayString | read-write | current |
| rlAAAAccountingMngMethod OBJECT-TYPE Method, used for accounting of management sessions, none denotes Accounting is disabled. | 1.3.6.1.4.1.89.79.55 | RlAAAAccountingMethod | read-write | current |
| rlAAAAccountingDot1xMethod OBJECT-TYPE Method, used for accounting of 802.1x sessions, none denotes Accounting is disabled. | 1.3.6.1.4.1.89.79.56 | RlAAAAccountingMethod | read-write | current |
| rlAAAUserInetTable OBJECT-TYPE The table holds all current users that have been authenticated. it coexist with rlAAAUserTable to support IPv4 and IPv6 | 1.3.6.1.4.1.89.79.57 | not-accessible | current | |
| rlAAAUserInetEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.89.79.57.1 | not-accessible | current | |
| rlAAAUserInetIndex OBJECT-TYPE User Index | 1.3.6.1.4.1.89.79.57.1.1 | Unsigned32 | not-accessible | current |
| rlAAAUserInetServiceType OBJECT-TYPE The service that the user uses. Service dont care is console terminal. | 1.3.6.1.4.1.89.79.57.1.2 | RlAAAServiceType | read-only | current |
| rlAAAUserInetRemoteIpAddressType OBJECT-TYPE User remote INET address Type. | 1.3.6.1.4.1.89.79.57.1.3 | InetAddressType | read-only | current |
| rlAAAUserInetRemoteIpAddress OBJECT-TYPE User remote INET address. | 1.3.6.1.4.1.89.79.57.1.4 | InetAddress | read-only | current |
| rlAAAUserInetName OBJECT-TYPE User Name | 1.3.6.1.4.1.89.79.57.1.5 | DisplayString | read-only | current |
| rlAAAUserInetLevel OBJECT-TYPE User level | 1.3.6.1.4.1.89.79.57.1.6 | Unsigned32 (1..15) | read-only | current |
| rlAAAUserInetIfIndex OBJECT-TYPE User if index. | 1.3.6.1.4.1.89.79.57.1.7 | Unsigned32 | read-only | current |
| rlAAAUserInetLoginDate OBJECT-TYPE Date of use creation. | 1.3.6.1.4.1.89.79.57.1.8 | DateAndTime | read-only | current |
| rlAAAUserInetLoginDurationMS OBJECT-TYPE Time in MS since user login. | 1.3.6.1.4.1.89.79.57.1.9 | Unsigned32 | read-only | current |
| rlAAALocalLoginHistInetTable OBJECT-TYPE The table holds successful login history for all users. This table is read-only. it coexist with rlAAALocalLoginHistTable to support IPv4 and IPv6 | 1.3.6.1.4.1.89.79.58 | not-accessible | current | |
| rlAAALocalLoginHistInetEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.89.79.58.1 | not-accessible | current | |
| rlAAALocalLoginHistInetName OBJECT-TYPE User Name | 1.3.6.1.4.1.89.79.58.1.1 | DisplayString | read-only | current |
| rlAAALocalLoginHistInetIndex OBJECT-TYPE Index in History for specific user. Lower number means more recent login. | 1.3.6.1.4.1.89.79.58.1.2 | Unsigned32 (1..10) | not-accessible | current |
| rlAAALocalLoginHistInetServiceType OBJECT-TYPE The service that the user uses. Service don't care is console terminal. | 1.3.6.1.4.1.89.79.58.1.3 | RlAAAServiceType | read-only | current |
| rlAAALocalLoginHistInetRemoteIpAddressType OBJECT-TYPE User remote IP address Type. | 1.3.6.1.4.1.89.79.58.1.4 | InetAddressType | read-only | current |
| rlAAALocalLoginHistInetRemoteIpAddress OBJECT-TYPE User remote IP address. | 1.3.6.1.4.1.89.79.58.1.5 | InetAddress | read-only | current |
| rlAAALocalLoginHistInetLocalIpAddressType OBJECT-TYPE local Ip Address Type on login. | 1.3.6.1.4.1.89.79.58.1.6 | InetAddressType | read-only | current |
| rlAAALocalLoginHistInetLocalIpAddress OBJECT-TYPE local Ip Address on login. | 1.3.6.1.4.1.89.79.58.1.7 | InetAddress | read-only | current |
| rlAAALocalLoginHistInetDateTime OBJECT-TYPE Date and time in the SysLog Format: DD-MMM-YYYY HH:MM:SS | 1.3.6.1.4.1.89.79.58.1.8 | DisplayString | read-only | current |
| rlAAALocalLoginHistInetMrid OBJECT-TYPE Mrid - indicates to which instance the connection was established | 1.3.6.1.4.1.89.79.58.1.9 | Unsigned32 | read-only | current |
| rlAAALinePassLoginHistInetTable OBJECT-TYPE The table holds successful login history for Line passwords. This table is read-only. it coexist with rlAAALinePassLoginHistTable to support IPv4 and IPv6 | 1.3.6.1.4.1.89.79.59 | not-accessible | current | |
| rlAAALinePassLoginHistInetEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.89.79.59.1 | not-accessible | current | |
| rlAAALinePassLoginHistInetPortType OBJECT-TYPE the physical port type. | 1.3.6.1.4.1.89.79.59.1.1 | RlAAALinePortType | read-write | current |
| rlAAALinePassLoginHistInetIfIndex OBJECT-TYPE Identifies the ifindex for which this entry can be used. If index 0 means don't care (can be used for all if indices). For port type console the value could be only 0. | 1.3.6.1.4.1.89.79.59.1.2 | Unsigned32 | read-write | current |
| rlAAALinePassLoginHistInetServiceType OBJECT-TYPE the service type | 1.3.6.1.4.1.89.79.59.1.3 | RlAAAServiceType | read-write | current |
| rlAAALinePassLoginHistInetIndex OBJECT-TYPE Index in HistInetory for specific user. Lower number means more recent login. | 1.3.6.1.4.1.89.79.59.1.4 | Unsigned32 (1..10) | not-accessible | current |
| rlAAALinePassLoginHistInetActServiceType OBJECT-TYPE The service that the user uses. Service don't care is console terminal. | 1.3.6.1.4.1.89.79.59.1.5 | RlAAAServiceType | read-only | current |
| rlAAALinePassLoginHistInetRemoteInetAddressType OBJECT-TYPE User remote IP address Type. | 1.3.6.1.4.1.89.79.59.1.6 | InetAddressType | read-only | current |
| rlAAALinePassLoginHistInetRemoteInetAddress OBJECT-TYPE User remote IP address. | 1.3.6.1.4.1.89.79.59.1.7 | InetAddress | read-only | current |
| rlAAALinePassLoginHistInetLocalInetAddressType OBJECT-TYPE local Ip Address Type on login. | 1.3.6.1.4.1.89.79.59.1.8 | InetAddressType | read-only | current |
| rlAAALinePassLoginHistInetLocalInetAddress OBJECT-TYPE local Ip Address on login. | 1.3.6.1.4.1.89.79.59.1.9 | InetAddress | read-only | current |
| rlAAALinePassLoginHistInetDateTime OBJECT-TYPE Date and time in the SysLog Format: DD-MMM-YYYY HH:MM:SS | 1.3.6.1.4.1.89.79.59.1.10 | DisplayString | read-only | current |
| rlAAALinePassLoginHistInetMrid OBJECT-TYPE Mrid - indicates to which instance the connection was established | 1.3.6.1.4.1.89.79.59.1.11 | Unsigned32 | read-only | current |
| rlAAASystemLoginHistInetTable OBJECT-TYPE The table holds successful login history for system passwords. This table is read-only. it coexist with rlAAASystemLoginHistTable to support IPv4 and IPv6 | 1.3.6.1.4.1.89.79.60 | not-accessible | current | |
| rlAAASystemLoginHistInetEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.89.79.60.1 | not-accessible | current | |
| rlAAASystemLoginHistInetLevel OBJECT-TYPE User Name | 1.3.6.1.4.1.89.79.60.1.1 | INTEGER (1..15) | read-only | current |
| rlAAASystemLoginHistInetIndex OBJECT-TYPE Index in History for specific user. Lower number means more recent login. | 1.3.6.1.4.1.89.79.60.1.2 | Unsigned32 (1..10) | not-accessible | current |
| rlAAASystemLoginHistInetServiceType OBJECT-TYPE The service that the user uses. Service don't care is console terminal. | 1.3.6.1.4.1.89.79.60.1.3 | RlAAAServiceType | read-only | current |
| rlAAASystemLoginHistInetRemoteInetAddressType OBJECT-TYPE User remote IP address Type. | 1.3.6.1.4.1.89.79.60.1.4 | InetAddressType | read-only | current |
| rlAAASystemLoginHistInetRemoteInetAddress OBJECT-TYPE User remote IP address. | 1.3.6.1.4.1.89.79.60.1.5 | InetAddress | read-only | current |
| rlAAASystemLoginHistInetLocalInetAddressType OBJECT-TYPE local Ip Address Type on login. | 1.3.6.1.4.1.89.79.60.1.6 | InetAddressType | read-only | current |
| rlAAASystemLoginHistInetLocalInetAddress OBJECT-TYPE local Ip Address on login. | 1.3.6.1.4.1.89.79.60.1.7 | InetAddress | read-only | current |
| rlAAASystemLoginHistInetDateTime OBJECT-TYPE Date and time in the SysLog Format: DD-MMM-YYYY HH:MM:SS | 1.3.6.1.4.1.89.79.60.1.8 | DisplayString | read-only | current |
| rlAAASystemLoginHistInetMrid OBJECT-TYPE Mrid - indicates to which instance the connection was established | 1.3.6.1.4.1.89.79.60.1.9 | Unsigned32 | read-only | current |
| rlAAAPasswordComplexityEnabled OBJECT-TYPE Specifies whether password complexity rules must be applied. | 1.3.6.1.4.1.89.79.61 | TruthValue | read-write | current |
| rlAAAPasswordComplexityMinCharClasses OBJECT-TYPE Indicates minimal number of character classes from which the password should contain characters if password complexity enabled. charater classes are : lower case, upper case, digits, special characters. | 1.3.6.1.4.1.89.79.62 | INTEGER (0..4) | read-write | current |
| rlAAAPasswordComplexityNotOldPasswordEnabled OBJECT-TYPE Specifies whether new password can be as same as old password if password complexity enabled. | 1.3.6.1.4.1.89.79.63 | TruthValue | read-write | current |
| rlAAAPasswordComplexityCharRepeat OBJECT-TYPE Indicates that no character in new password can't be repeated more than 3 times if password complexity enabled. | 1.3.6.1.4.1.89.79.64 | INTEGER | read-write | current |
| rlAAAPasswordComplexityNotUserNameEnabled OBJECT-TYPE Specifies whether new password can be as same as user name if password complexity enabled. | 1.3.6.1.4.1.89.79.65 | TruthValue | read-write | current |
| rlAAAPasswordComplexityNotManufacturerEnabled OBJECT-TYPE Specifies whether new password can be as same as manufacturer name if password complexity enabled. | 1.3.6.1.4.1.89.79.66 | TruthValue | read-write | current |
| rlAAAPasswordGlobalAgingTime OBJECT-TYPE Determines whether password aging should be applied. Tic doesn't have to be enabled. If == 0 then aging is disabled. Note: Actual aging will not be enabled if system doesn't have real time clock until, clock is set either by user or SNTP. | 1.3.6.1.4.1.89.79.67 | INTEGER (0..365) | read-write | current |
| rlAAALocalUserPasswordVerificationAndSettingTable OBJECT-TYPE The table specifies per every local user, old and new passwords. Serves for verification the old password and setting a new password. | 1.3.6.1.4.1.89.79.68 | not-accessible | current | |
| rlAAALocalUserPasswordVerificationAndSettingEntry OBJECT-TYPE The row of local user password verification and setting table. | 1.3.6.1.4.1.89.79.68.1 | not-accessible | current | |
| rlAAALocalUserNameString OBJECT-TYPE Local user name. | 1.3.6.1.4.1.89.79.68.1.1 | DisplayString (SIZE(1..20)) | read-write | current |
| rlAAALocalUserVerificationOldPassword OBJECT-TYPE Local user old password to be verified. | 1.3.6.1.4.1.89.79.68.1.2 | DisplayString | read-write | current |
| rlAAALocalUserSettingNewPassword OBJECT-TYPE Local user new password to be set. | 1.3.6.1.4.1.89.79.68.1.3 | DisplayString | read-write | current |
| rlAAALocalUserConfirmNewPassword OBJECT-TYPE Local user new password for confirmation. | 1.3.6.1.4.1.89.79.68.1.4 | DisplayString | read-write | current |
| rlAAACreationDateSystemPasswordLevel15 OBJECT-TYPE The date on which the system Password for level 15 was created. Otherwise zero size string | 1.3.6.1.4.1.89.79.69 | DisplayString | read-only | current |
| rlAAAPasswordRecoveryDisable OBJECT-TYPE if this MIB is set to TRUE then when user will use 'password Recovery' to the device , the configuration will automatically be erased. | 1.3.6.1.4.1.89.79.70 | TruthValue | read-write | current |
| rlRadiusMibVersion OBJECT-TYPE MIB's version, the current version is 2. 1 - original version. 2 - field rlRadiusServerUsage was added to rlRadiusServerEntry | 1.3.6.1.4.1.89.80.1 | INTEGER | read-only | current |
| rlRadiusGlobalDefaultTimeout OBJECT-TYPE The maximum time (in seconds) to wait for this RADIUS server to reply. This MIB is used if the value of the field rlRadiusServerUseGlobalDefaultTimeout is false. | 1.3.6.1.4.1.89.80.2 | INTEGER (1..30) | read-write | current |
| rlRadiusGlobalDefaultRetries OBJECT-TYPE The number of times to try contacting this RADIUS server. This MIB is used if the value of the field rlRadiusServerUseGlobalDefaultRetries is false. | 1.3.6.1.4.1.89.80.3 | INTEGER (1..15) | read-write | current |
| rlRadiusGlobalDefaultDeadtime OBJECT-TYPE Number of minutes that any RADIUS server is ignored after it has failed. This MIB is used if the value of the field rlRadiusServerUseGlobalDefaultDeadtime is false. | 1.3.6.1.4.1.89.80.4 | INTEGER (0..2000) | read-write | current |
| rlRadiusGlobalDefaultKey OBJECT-TYPE Secret key to be shared with this RADIUS server. This MIB is used if the value of the field rlRadiusServerUseGlobalDefaultKey is false. | 1.3.6.1.4.1.89.80.5 | DisplayString (SIZE(0..128)) | read-write | current |
| rlRadiusGlobalDefaultSource OBJECT-TYPE IPv4 address of the interface to use with this server. A value of 0.0.0.0 for this object disables source address specification. This MIB is used if the value of the field rlRadiusServerUseGlobalDefaultSource is false. | 1.3.6.1.4.1.89.80.6 | IpAddress | read-write | current |
| rlRadiusServerTable OBJECT-TYPE The (conceptual) table listing the RADIUS servers with which the cliient shares a secret. | 1.3.6.1.4.1.89.80.7 | not-accessible | current | |
| rlRadiusServerEntry OBJECT-TYPE An entry (conceptual row) representing a RADIUS server with which the client shares a secret. | 1.3.6.1.4.1.89.80.7.1 | not-accessible | current | |
| rlRadiusServerAddress OBJECT-TYPE The IP address of the RADIUS server referred to in this table entry. | 1.3.6.1.4.1.89.80.7.1.1 | IpAddress | read-write | current |
| rlRadiusServerAuthPortNumber OBJECT-TYPE The UDP port the client is using to send authentication requests to this server. | 1.3.6.1.4.1.89.80.7.1.2 | INTEGER (0..65535) | read-write | current |
| rlRadiusServerAcctPortNumber OBJECT-TYPE The UDP port the client is using to send accounting requests to this server. | 1.3.6.1.4.1.89.80.7.1.3 | INTEGER (0..65535) | read-write | current |
| rlRadiusServerTimeout OBJECT-TYPE The maximum time (in seconds) to wait for this RADIUS server to reply. Value of 0 means that rlRadiusGlobalDefaultTimeout. | 1.3.6.1.4.1.89.80.7.1.4 | INTEGER (0..30) | read-write | current |
| rlRadiusServerRetries OBJECT-TYPE The number of times to try contacting this RADIUS server. Value of 0 means that rlRadiusGlobalDefaultRetries. | 1.3.6.1.4.1.89.80.7.1.5 | INTEGER (0..15) | read-write | current |
| rlRadiusServerDeadtime OBJECT-TYPE Number of minutes that any RADIUS server is ignored after it has failed. Value of 2001 means that rlRadiusGlobalDefaultDeadtime will be used. | 1.3.6.1.4.1.89.80.7.1.6 | INTEGER (0..2001) | read-write | current |
| rlRadiusServerUseGlobalDefaultKey OBJECT-TYPE If this field is set to true the value in field rlRadiusServerKey is ignored and instead the value in the MIB rlRadiusGlobalDefaultKey is used. Otherwise the value in rlRadiusServerKey is used. | 1.3.6.1.4.1.89.80.7.1.7 | TruthValue | read-write | current |
| rlRadiusServerKey OBJECT-TYPE Secret key to be shared with this RADIUS server. | 1.3.6.1.4.1.89.80.7.1.8 | DisplayString (SIZE(0..128)) | read-write | current |
| rlRadiusServerSource OBJECT-TYPE IP address of the interface to use with this server. A value of 0.0.0.0 for this object disables source address specification. Default value of 255.255.255.255 means that rlRadiusGlobalDefaultSource will be used. | 1.3.6.1.4.1.89.80.7.1.9 | IpAddress | read-write | current |
| rlRadiusServerPriority OBJECT-TYPE Determines the order in which the servers will be used, when 0 is the highest priority. If more than one server share the same priority - they will be used in lexicgoraphic order (the order of entries in this table). | 1.3.6.1.4.1.89.80.7.1.10 | INTEGER (0..65535) | read-write | current |
| rlRadiusServerStatus OBJECT-TYPE | 1.3.6.1.4.1.89.80.7.1.11 | RowStatus | read-write | current |
| rlRadiusServerUsage OBJECT-TYPE Determines actions for which the radius server will be used. | 1.3.6.1.4.1.89.80.7.1.12 | INTEGER {userAuthentication(1), portAuthentication(2), all(3), wirelessAuthentication(4)} | read-write | current |
| rlRadiusServerInetTable OBJECT-TYPE The (conceptual) table listing the RADIUS servers with which the cliient shares a secret. | 1.3.6.1.4.1.89.80.8 | not-accessible | current | |
| rlRadiusServerInetEntry OBJECT-TYPE An entry (conceptual row) representing a RADIUS server with which the client shares a secret. | 1.3.6.1.4.1.89.80.8.1 | not-accessible | current | |
| rlRadiusServerInetAddressType OBJECT-TYPE The Inet address type of RADIUS server reffered to in this table entry .IPv6Z type is not supported. | 1.3.6.1.4.1.89.80.8.1.1 | InetAddressType | read-write | current |
| rlRadiusServerInetAddress OBJECT-TYPE The Inet address of the RADIUS server referred to in this table entry.Only one instance of specified address can be added at the same time. | 1.3.6.1.4.1.89.80.8.1.2 | InetAddress | read-write | current |
| rlRadiusServerInetAuthPortNumber OBJECT-TYPE The UDP port the client is using to send authentication requests to this server.The zero value can be used only if rlRadiusServerInetAcctPortNumber value is not zero. | 1.3.6.1.4.1.89.80.8.1.3 | INTEGER (0..65535) | read-write | current |
| rlRadiusServerInetAcctPortNumber OBJECT-TYPE The UDP port the client is using to send accounting requests to this server.The zero value can be used only if rlRadiusServerInetAuthPortNumber value is not zero. | 1.3.6.1.4.1.89.80.8.1.4 | INTEGER (0..65535) | read-write | current |
| rlRadiusServerInetTimeout OBJECT-TYPE The maximum time (in seconds) to wait for this RADIUS server to reply. Value of 0 means that rlRadiusGlobalDefaultTimeout. | 1.3.6.1.4.1.89.80.8.1.5 | INTEGER (0..30) | read-write | current |
| rlRadiusServerInetRetries OBJECT-TYPE The number of times to try contacting this RADIUS server. Value of 0 means that rlRadiusGlobalDefaultRetries. | 1.3.6.1.4.1.89.80.8.1.6 | INTEGER (0..15) | read-write | current |
| rlRadiusServerInetDeadtime OBJECT-TYPE Number of minutes that any RADIUS server is ignored after it has failed. Value of 2001 means that rlRadiusGlobalDefaultDeadtime will be used. | 1.3.6.1.4.1.89.80.8.1.7 | INTEGER (0..2001) | read-write | current |
| rlRadiusServerInetUseGlobalDefaultKey OBJECT-TYPE If this field is set to true the value in field rlRadiusServerKey is ignored and instead the value in the MIB rlRadiusGlobalDefaultKey is used. Otherwise the value in rlRadiusServerKey is used. | 1.3.6.1.4.1.89.80.8.1.8 | TruthValue | read-write | current |
| rlRadiusServerInetKey OBJECT-TYPE Secret key to be shared with this RADIUS server. | 1.3.6.1.4.1.89.80.8.1.9 | DisplayString (SIZE(0..128)) | read-write | current |
| rlRadiusServerInetSourceType OBJECT-TYPE The rlRadiusServerInetSource address type. IPv6Z type not supported | 1.3.6.1.4.1.89.80.8.1.10 | InetAddressType | read-write | current |
| rlRadiusServerInetSource OBJECT-TYPE Inet address of the interface to use with this server. To provide backward compatibility the value of 0.0.0.0 for this object will be used to disables source address specification. Default value of 255.255.255.255 means that rlRadiusGlobalDefaultSource will be used for Ipv4 servers and rlRadiusIPv6GlobalDefaultSource will be used for Ipv6 servers.IPv6Z type not supported. Only valid IP address will be used. Application will set default value. | 1.3.6.1.4.1.89.80.8.1.11 | InetAddress | read-write | current |
| rlRadiusServerInetPriority OBJECT-TYPE Determines the order in which the servers will be used, when 0 is the highest priority. If more than one server share the same priority - they will be used in lexicgoraphic order (the order of entries in this table). | 1.3.6.1.4.1.89.80.8.1.12 | INTEGER (0..65535) | read-write | current |
| rlRadiusServerInetStatus OBJECT-TYPE | 1.3.6.1.4.1.89.80.8.1.13 | RowStatus | read-write | current |
| rlRadiusServerInetUsage OBJECT-TYPE Determines actions for which the radius server will be used. WirelessAuthentication will be used if wireless is supported. | 1.3.6.1.4.1.89.80.8.1.14 | INTEGER {userAuthentication(1), portAuthentication(2), all(3), wirelessAuthentication(4)} | read-write | current |
| rlRadiusServerInetLastResponseTime OBJECT-TYPE The value of sysUpTime at the time this server has response. If there is no request to the server, this object contains a zero value. | 1.3.6.1.4.1.89.80.8.1.15 | TimeStamp | read-only | current |
| rlRadiusGlobalIPv6DefaultSource OBJECT-TYPE IPv6 address of the interface to use with this server. A NULL value for this object disables source address specification. | 1.3.6.1.4.1.89.80.9 | InetAddressIPv6 | read-write | current |
| rlAAAEapMethodListTable OBJECT-TYPE The table specifies all methods list per method name. | 1.3.6.1.4.1.89.97.1 | not-accessible | current | |
| rlAAAEapMethodListEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.89.97.1.1 | not-accessible | current | |
| rlAAAEapMethodListName OBJECT-TYPE Line Method List Name | 1.3.6.1.4.1.89.97.1.1.1 | DisplayString (SIZE(3..20)) | read-write | current |
| rlAAAEapMethodType1 OBJECT-TYPE first method type that will be used in the method linked list. | 1.3.6.1.4.1.89.97.1.1.2 | RlAAAEapMethodtype | read-write | current |
| rlAAAEapMethodType2 OBJECT-TYPE second method type that will be used in the method linked list. | 1.3.6.1.4.1.89.97.1.1.3 | RlAAAEapMethodtype | read-write | current |
| rlAAAEapMethodType3 OBJECT-TYPE 3th method type that will be used in the method linked list. | 1.3.6.1.4.1.89.97.1.1.4 | RlAAAEapMethodtype | read-write | current |
| rlAAAEapMethodType4 OBJECT-TYPE 4th method type that will be used in the method linked list. | 1.3.6.1.4.1.89.97.1.1.5 | RlAAAEapMethodtype | read-write | current |
| rlAAAEapMethodType5 OBJECT-TYPE 5th method type that will be used in the method linked list. | 1.3.6.1.4.1.89.97.1.1.6 | RlAAAEapMethodtype | read-write | current |
| rlAAAEapMethodListStatus OBJECT-TYPE method list status can be destroy or createAndGo | 1.3.6.1.4.1.89.97.1.1.7 | RowStatus | read-write | current |
| rlAAAEapCurrentMethodList OBJECT-TYPE Specifies the method list that will be used for authentication. | 1.3.6.1.4.1.89.97.2 | DisplayString (SIZE(3..20)) | read-write | current |