DVB-RCS-MIB
- Registered at
- 1.3.6.1.2.1.10.239
- Last updated
- 2010-02-16 12:00
- Organization
- The SatLabs Group
- Revisions
- 2009-07-20 12:00
- Namespace
- standard
- Source file
DVB-RCS-MIB- Digest
sha256:20e793066d6d818f4ff943fa1e004a5f52737c96064d0c960895a1a013f088d6
Description
DVB-RCS MIB subtree. This MIB module applies to equipment that is a Return Channel Satellite Terminal (RCST), defined in the Digital Video Broadcasting Return Channel via Satellite system (DVB-RCS) standard (ETSI EN 301 790 Digital Video Broadcasting (DVB); Interaction Channel for Satellite Distribution Systems, European Telecommunications Standards Institute (ETSI)). It defines a set of MIB objects to characterize the behavior and performance of network-layer entities implementing DVB-RCS. This MIB module is intended to be used by DVB-RCS equipment following the SatLabs System Recommendations, defined by the SatLabs Group and available at www.satlabs.org. Note that, if not stated otherwise in the object DESCRIPTION clause, all writable objects are persistent. Copyright (C) The IETF Trust (2010). This version of this MIB module is part of RFC 5728; see the RFC itself for full legal notices.
Contact
The SatLabs Group Web: www.satlabs.org E-mail: info@satlabs.org
Imports
| From | Symbols |
|---|---|
| DIFFSERV-DSCP-TC | Dscp, DscpOrAny |
| INET-ADDRESS-MIB | InetAddress, InetAddressPrefixLength, InetAddressType, InetPortNumber |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso, transmission |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION |
| URI-TC-MIB | Uri |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
DIFFSERV-DSCP-TC DVB-RCS-MIB INET-ADDRESS-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC URI-TC-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| DvbRcsSatLabsFeatureMap TEXTUAL-CONVENTION This textual convention enumerates the declaration of the SatLabs-specified compatibility and configuration features. A value of 1 indicates that the respective feature is supported. The mapping to the features is to be understood as described here. (0) refers to the most significant bit. rcstPara(0) -> RCST_PARA feature installLog(1) -> INSTALL_LOG feature enhClassifier(2) -> ENHCLASSIFIER feature routeId(3) -> ROUTE_ID feature oduList(4) -> ODULIST feature extNetwork(5) -> EXTNETWORK feature extControl(6) -> EXTCONTROL feature extConfig(7) -> EXTCONFIG feature extStatus(8) -> EXTSTATUS feature mpaf(9) -> MPAF feature The support of specific features mandates the support of specific objects and access levels. | current | |||
| DvbRcsSatLabsOptionMap TEXTUAL-CONVENTION This textual convention enumerates the declaration of the SatLabs-defined options. A value of 1 indicates that the respective option is supported. The mapping to the options is to be understood as described here. (0) refers to the most significant bit. mpegTrf(0) -> MPEG_TRF coarseSync(1) -> COARSE_SYNC wideHop(2) -> WIDE_HOPP fastHop(3) -> FAST_HOPP dynamicMfTdma(4) -> Dynamic_MF_TDMA contentionSync(5) -> CONTENTION_SYNC qpskLow(6) -> QPSKLOW mod16Apsk(7) -> 16APSK mod32Apsk(8) -> 32APSK normalFec(9) -> NORMALFEC multiTs(10) -> MULTITS gsTs(11) -> GSTS enhQoS(12) -> ENHQOS pep(13) -> PEP http(14) -> HTTP ftp(15) -> FTP dns(16) -> DNS chIdStrict(17) -> CHID_STRICT nlid(18) -> NLID snmpMisc(19) -> SNMPMISC The support of specific options mandates the support of specific objects and access levels. | current | |||
| DvbRcsSatLabsProfileMap TEXTUAL-CONVENTION This textual convention enumerates the declaration of the SatLabs-defined terminal profiles. The mapping to the profiles is to be understood as described here. (0) refers to the most significant bit. dvbs(0) -> DVBS profile (DVB-S support) dvbs2ccm(1) -> DVB-S2 CCM profile (CCM support) dvbs2acm(2) -> DVB-S2 ACM profile (CCM, VCM and ACM support) | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| dvbRcsMibObjects OBJECT-IDENTITY | 1.3.6.1.2.1.10.239.1 | |||
| dvbRcsRcst OBJECT-IDENTITY | 1.3.6.1.2.1.10.239.1.1 | |||
| dvbRcsRcstSystem OBJECT-IDENTITY | 1.3.6.1.2.1.10.239.1.1.1 | |||
| dvbRcsSystemMibRevision OBJECT-TYPE This object allows the SNMP agent to report the implemented MIB module revision. The supported REVISION of this module is reported. | 1.3.6.1.2.1.10.239.1.1.1.1 | SnmpAdminString | read-only | current |
| dvbRcsSystemSatLabsProfilesDeclaration OBJECT-TYPE Indicates the SatLabs profiles supported, as defined in the SatLabs System Recommendations. | 1.3.6.1.2.1.10.239.1.1.1.2 | DvbRcsSatLabsProfileMap | read-only | current |
| dvbRcsSystemSatLabsOptionsDeclaration OBJECT-TYPE Indicates the SatLabs options supported, as defined in the SatLabs System Recommendations. | 1.3.6.1.2.1.10.239.1.1.1.3 | DvbRcsSatLabsOptionMap | read-only | current |
| dvbRcsSystemSatLabsFeaturesDeclaration OBJECT-TYPE Indicates the optional compatibility features and minor options supported, as defined in the SatLabs System Recommendations. | 1.3.6.1.2.1.10.239.1.1.1.4 | DvbRcsSatLabsFeatureMap | read-only | current |
| dvbRcsSystemLocation OBJECT-TYPE Physical location of the ODU antenna expressed as longitude, latitude, and altitude. The string shall have 31 characters in the following format: <xxxx.xxx>,<a>,<yyyyy.yyy>,<b>,<zzzz.z>,M where x, y and z represents digits, a=N or S, b=E or W, Reading the digits from left to right: 'x' 7 latitude digits; x digits 1-2 contain the degrees, x digits 3-7 contain the minutes in decimal; 'y' 8 longitude digits; y digits 1-3 contain the degrees, y digits 4-8 contain the minutes in decimal; 'z' 5 altitude digits; meters above sea level in decimal; '.' is the decimal point; ',' is the field separator; 'M' is the indicator for altitude meters. This format is a modified subset of the NMEA 0183 (National Marine Electronics Association, Interface Standard) format for Global Positioning System Fix Data. This location and the satellite position are used to calculate the RCST-satellite path delay. Note: The system.sysLocation object of MIB-II provides physical location of the IDU unit. | 1.3.6.1.2.1.10.239.1.1.1.5 | SnmpAdminString | read-write | current |
| dvbRcsSystemOduAntennaSize OBJECT-TYPE Diameter of the antenna. | 1.3.6.1.2.1.10.239.1.1.1.6 | Unsigned32 | read-write | current |
| dvbRcsSystemOduAntennaGain OBJECT-TYPE Antenna peak gain of the ODU. | 1.3.6.1.2.1.10.239.1.1.1.7 | Unsigned32 | read-write | current |
| dvbRcsSystemOduSspa OBJECT-TYPE Power level of the Solid State Power Amplifier installed in the ODU. | 1.3.6.1.2.1.10.239.1.1.1.8 | Unsigned32 | read-write | current |
| dvbRcsSystemOduTxType OBJECT-TYPE Type of transmitter installed in the ODU. | 1.3.6.1.2.1.10.239.1.1.1.9 | SnmpAdminString | read-write | current |
| dvbRcsSystemOduRxType OBJECT-TYPE Type of LNB installed in the ODU, with information such as vendor type, output type (single, twin, quad,...), etc. | 1.3.6.1.2.1.10.239.1.1.1.10 | SnmpAdminString | read-write | current |
| dvbRcsSystemOduRxBand OBJECT-TYPE LNB High Band / Low Band selector. High Band corresponds to the emission of an 18-26 kHz tone with 0.4-0.8 Vpp in the Rx IFL cable: (0) - High Band (1) - Low Band | 1.3.6.1.2.1.10.239.1.1.1.11 | INTEGER {oduHighRxBand(0), oduLowRxBand(1)} | read-write | current |
| dvbRcsSystemOduRxLO OBJECT-TYPE Frequency of LNB Local Oscillator (in 100 Hz) | 1.3.6.1.2.1.10.239.1.1.1.12 | Unsigned32 | read-write | current |
| dvbRcsSystemOduTxLO OBJECT-TYPE Frequency of Block Up-Converter Local Oscillator (in 100 Hz). | 1.3.6.1.2.1.10.239.1.1.1.13 | Unsigned32 | read-write | current |
| dvbRcsSystemIduPep OBJECT-IDENTITY | 1.3.6.1.2.1.10.239.1.1.1.14 | |||
| dvbRcsTcpPep OBJECT-TYPE Status and control of embedded TCP PEP. 0 - disabled or not implemented 1 - enabled | 1.3.6.1.2.1.10.239.1.1.1.14.1 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| dvbRcsHttpPep OBJECT-TYPE Status and control of embedded HTTP PEP. 0 - disabled or not implemented 1 - enabled | 1.3.6.1.2.1.10.239.1.1.1.14.2 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| dvbRcsOduTx OBJECT-IDENTITY | 1.3.6.1.2.1.10.239.1.1.1.15 | |||
| dvbRcsOduTxTypeTable OBJECT-TYPE This table contains the identification of each well- known BUC type supported by the IDU and provides its associated index. | 1.3.6.1.2.1.10.239.1.1.1.15.1 | not-accessible | current | |
| dvbRcsOduTxTypeEntry OBJECT-TYPE An entry in the BUC type table. | 1.3.6.1.2.1.10.239.1.1.1.15.1.1 | not-accessible | current | |
| dvbRcsOduTxTypeIndex OBJECT-TYPE Index for the BUC type. | 1.3.6.1.2.1.10.239.1.1.1.15.1.1.1 | Unsigned32 (1..32) | not-accessible | current |
| dvbRcsOduTxTypeDescription OBJECT-TYPE Text-based identification of a BUC type. | 1.3.6.1.2.1.10.239.1.1.1.15.1.1.2 | SnmpAdminString | read-only | current |
| dvbRcsOduTxType OBJECT-TYPE Index of the selected BUC type. | 1.3.6.1.2.1.10.239.1.1.1.15.2 | Unsigned32 | read-write | current |
| dvbRcsOduRx OBJECT-IDENTITY | 1.3.6.1.2.1.10.239.1.1.1.16 | |||
| dvbRcsOduRxTypeTable OBJECT-TYPE This table contains the identification of each well- known LNB type supported by the IDU and provides its associated index. | 1.3.6.1.2.1.10.239.1.1.1.16.1 | not-accessible | current | |
| dvbRcsOduRxTypeEntry OBJECT-TYPE An entry in the LNB type table. | 1.3.6.1.2.1.10.239.1.1.1.16.1.1 | not-accessible | current | |
| dvbRcsOduRxTypeIndex OBJECT-TYPE Index for the LNB type. | 1.3.6.1.2.1.10.239.1.1.1.16.1.1.1 | Unsigned32 (1..32) | not-accessible | current |
| dvbRcsOduRxTypeDescription OBJECT-TYPE Text-based identification of an LNB type. | 1.3.6.1.2.1.10.239.1.1.1.16.1.1.2 | SnmpAdminString | read-only | current |
| dvbRcsOduRxType OBJECT-TYPE Index of the selected LNB type. | 1.3.6.1.2.1.10.239.1.1.1.16.2 | Unsigned32 | read-write | current |
| dvbRcsOduAntenna OBJECT-IDENTITY | 1.3.6.1.2.1.10.239.1.1.1.17 | |||
| dvbRcsOduAntennaTypeTable OBJECT-TYPE This table contains the identification of each well- known antenna type supported by the IDU and provides its associated index. | 1.3.6.1.2.1.10.239.1.1.1.17.1 | not-accessible | current | |
| dvbRcsOduAntennaTypeEntry OBJECT-TYPE An entry in the antenna type table. | 1.3.6.1.2.1.10.239.1.1.1.17.1.1 | not-accessible | current | |
| dvbRcsOduAntennaTypeIndex OBJECT-TYPE Index for the antenna type. | 1.3.6.1.2.1.10.239.1.1.1.17.1.1.1 | Unsigned32 (1..32) | not-accessible | current |
| dvbRcsOduAntennaTypeDescription OBJECT-TYPE Text-based identification of an antenna type. | 1.3.6.1.2.1.10.239.1.1.1.17.1.1.2 | SnmpAdminString | read-only | current |
| dvbRcsOduAntennaType OBJECT-TYPE Index of the selected antenna type. | 1.3.6.1.2.1.10.239.1.1.1.17.2 | Unsigned32 | read-write | current |
| dvbRcsRcstNetwork OBJECT-IDENTITY | 1.3.6.1.2.1.10.239.1.1.2 | |||
| dvbRcsNetworkOamInetAddressType OBJECT-TYPE The type of Internet address of dvbRcsNetworkOamInetAddress. If the terminal OAM Internet address is unassigned or unknown, then the value of this object is unknown(0). | 1.3.6.1.2.1.10.239.1.1.2.1 | InetAddressType | read-write | current |
| dvbRcsNetworkOamInetAddress OBJECT-TYPE OAM IP Address of the RCST. This object is used with both IP and interfaces MIB-II subgroups. It uniquely determines the interface through which OAM traffic passes. The OAM IP address may be statically or dynamically assigned. It is system dependent whether the OAM IP address and the Traffic IP address are the same address. If the terminal has no OAM Internet address assigned or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsNetworkOamInetAddressType object. | 1.3.6.1.2.1.10.239.1.1.2.2 | InetAddress | read-write | current |
| dvbRcsNetworkOamInetAddressPrefixLength OBJECT-TYPE Prefix length for the OAM IP Address. If this address prefix is unknown or does not apply, the value is zero. | 1.3.6.1.2.1.10.239.1.1.2.3 | InetAddressPrefixLength | read-write | current |
| dvbRcsNetworkOamInetAddressAssign OBJECT-TYPE Identifies whether the OAM IP address is statically (1) or dynamically (2) assigned. | 1.3.6.1.2.1.10.239.1.1.2.4 | INTEGER {oamInetAddressStatic(1), oamInetAddressDynamic(2)} | read-write | current |
| dvbRcsNetworkLanInetAddressType OBJECT-TYPE The type of Internet address of dvbRcsNetworkLanInetAddress. If the terminal Internet address on the LAN interface is unassigned or unknown, then the value of this object is unknown(0). | 1.3.6.1.2.1.10.239.1.1.2.5 | InetAddressType | read-write | current |
| dvbRcsNetworkLanInetAddress OBJECT-TYPE IP address of the LAN interface of the terminal. If the terminal has no Internet address assigned on the LAN interface or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsNetworkLanInetAddressType object. | 1.3.6.1.2.1.10.239.1.1.2.6 | InetAddress | read-write | current |
| dvbRcsNetworkLanInetAddressPrefixLength OBJECT-TYPE Prefix length for the LAN IP Address of the terminal. If this address prefix is unknown or does not apply, the value is zero. | 1.3.6.1.2.1.10.239.1.1.2.7 | InetAddressPrefixLength | read-write | current |
| dvbRcsNetworkAirInterfaceDefaultGatewayInetAddressType OBJECT-TYPE The type of Internet address of dvbRcsNetworkAirInterfaceDefaultGatewayInetAddress. If the default gateway Internet address is unassigned or unknown, then the value of this object is unknown(0). | 1.3.6.1.2.1.10.239.1.1.2.8 | InetAddressType | read-write | current |
| dvbRcsNetworkAirInterfaceDefaultGatewayInetAddress OBJECT-TYPE IP address of the default gateway for the air interface. If the terminal has no default gateway assigned on the air interface or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsNetworkAirInterfaceDefaultGatewayInetAddressType object. | 1.3.6.1.2.1.10.239.1.1.2.9 | InetAddress | read-write | current |
| dvbRcsNetworkAirInterfaceDefaultGatewayInetAddressPrefixLength OBJECT-TYPE Prefix length for the IP address of the default gateway for the air interface. If this address prefix is unknown or does not apply, the value is zero. | 1.3.6.1.2.1.10.239.1.1.2.10 | InetAddressPrefixLength | read-write | current |
| dvbRcsNetworkDnsServers OBJECT-IDENTITY | 1.3.6.1.2.1.10.239.1.1.2.11 | |||
| dvbRcsPrimaryDnsServerInetAddressType OBJECT-TYPE The type of Internet address of dvbRcsPrimaryDnsServerInetAddress. If the primary DNS server Internet address is unassigned or unknown, then the value of this object is unknown(0). | 1.3.6.1.2.1.10.239.1.1.2.11.1 | InetAddressType | read-write | current |
| dvbRcsPrimaryDnsServerInetAddress OBJECT-TYPE IP address of the primary DNS server in the NCC. If the terminal has no primary DNS server assigned or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsPrimaryDnsServerInetAddressType object. | 1.3.6.1.2.1.10.239.1.1.2.11.2 | InetAddress | read-write | current |
| dvbRcsPrimaryDnsServerInetAddressPrefixLength OBJECT-TYPE Prefix length for the IP address of the primary DNS server in the NCC. If this address prefix is unknown or does not apply, the value is zero. | 1.3.6.1.2.1.10.239.1.1.2.11.3 | InetAddressPrefixLength | read-write | current |
| dvbRcsSecondaryDnsServerInetAddressType OBJECT-TYPE The type of Internet address of dvbRcsSecondaryDnsServerInetAddress. If the secondary DNS server Internet address is unassigned or unknown, then the value of this object is unknown(0). | 1.3.6.1.2.1.10.239.1.1.2.11.4 | InetAddressType | read-write | current |
| dvbRcsSecondaryDnsServerInetAddress OBJECT-TYPE IP address of the secondary DNS server in the NCC. If the terminal has no secondary DNS server assigned or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsSecondaryDnsServerInetAddressType object. | 1.3.6.1.2.1.10.239.1.1.2.11.5 | InetAddress | read-write | current |
| dvbRcsSecondaryDnsServerInetAddressPrefixLength OBJECT-TYPE Prefix length for the IP address of the secondary DNS server in the NCC. If this address prefix is unknown or does not apply, the value is zero. | 1.3.6.1.2.1.10.239.1.1.2.11.6 | InetAddressPrefixLength | read-write | current |
| dvbRcsNetworkNccMgtInetAddressType OBJECT-TYPE The type of Internet address of dvbRcsNetworkNccMgtInetAddress. If the management server Internet address is unassigned or unknown, then the value of this object is unknown(0). | 1.3.6.1.2.1.10.239.1.1.2.12 | InetAddressType | read-write | current |
| dvbRcsNetworkNccMgtInetAddress OBJECT-TYPE IP address of the management server in the NCC. If the terminal has no management server assigned or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsNetworkNccMgtInetAddressType object. | 1.3.6.1.2.1.10.239.1.1.2.13 | InetAddress | read-write | current |
| dvbRcsNetworkNccMgtInetAddressPrefixLength OBJECT-TYPE Prefix length for the IP address of the management server in the NCC. If this address prefix is unknown or does not apply, the value is zero. | 1.3.6.1.2.1.10.239.1.1.2.14 | InetAddressPrefixLength | read-write | current |
| dvbRcsNetworkConfigFileDownloadUrl OBJECT-TYPE Full path name for the configuration file download. It includes the protocol type (TFTP or FTP) and the associated server IP address or hostname. Hostname can only be used if DNS is supported by the RCST. The format of this parameter follows RFC 3986. | 1.3.6.1.2.1.10.239.1.1.2.15 | Uri (SIZE(0..65535)) | read-write | current |
| dvbRcsNetworkInstallLogFileDownloadUrl OBJECT-TYPE Full path of the installation log file to download. It includes the protocol type (TFTP or FTP) and the associated server IP address or hostname. Hostname can only be used if DNS is supported by the RCST. The installation log file can be created on the installer's computer and downloaded to the RCST. The format of this parameter follows RFC 3986. | 1.3.6.1.2.1.10.239.1.1.2.16 | Uri (SIZE(0..65535)) | read-write | current |
| dvbRcsNetworkConfigFileUploadUrl OBJECT-TYPE Full path name for the configuration file upload. It includes the protocol type (TFTP or FTP) and the associated server IP address or hostname. Hostname can only be used if DNS is supported by the RCST. The format of this parameter follows RFC 3986. | 1.3.6.1.2.1.10.239.1.1.2.17 | Uri (SIZE(0..65535)) | read-write | current |
| dvbRcsNetworkLogFileUploadUrl OBJECT-TYPE Full path of the event log file. It includes the protocol type (TFTP or FTP) and the associated server IP address or hostname. Hostname can only be used if DNS is supported by the RCST. The format of this parameter follows RFC 3986. | 1.3.6.1.2.1.10.239.1.1.2.18 | Uri (SIZE(0..65535)) | read-write | current |
| dvbRcsNetworkInstallLogFileUploadUrl OBJECT-TYPE Full path of the installation log file. It includes the protocol type (TFTP or FTP) and the associated server IP address or hostname. Hostname can only be used if DNS is supported by the RCST. The installation log file can be retrieved from the RCST by the NCC or by the installer via the LAN. The format of this parameter follows RFC 3986. | 1.3.6.1.2.1.10.239.1.1.2.19 | Uri (SIZE(0..65535)) | read-write | current |
| dvbRcsRcstInstall OBJECT-IDENTITY | 1.3.6.1.2.1.10.239.1.1.3 | |||
| dvbRcsInstallAntennaAlignmentState OBJECT-TYPE Indicates the alignment state of the antenna: (1)-Start; (2)-Deny; (3)-Continue; (4)-Stop; (5)-Success; (6)-Fail | 1.3.6.1.2.1.10.239.1.1.3.1 | INTEGER {antennaAlignmentStart(1), antennaAlignmentDeny(2), antennaAlignmentContinue(3), antennaAlignmentStop(4), antennaAlignmentSuccess(5), antennaAlignmentFail(6)} | read-write | current |
| dvbRcsInstallCwFrequency OBJECT-TYPE Frequency of the transmitted Continuous Wave carrier (in 100 Hz). Minimum required precision is 1 kHz. | 1.3.6.1.2.1.10.239.1.1.3.2 | Unsigned32 | read-write | current |
| dvbRcsInstallCwMaxDuration OBJECT-TYPE Time after which the Continuous Wave carrier must be put down (in seconds). | 1.3.6.1.2.1.10.239.1.1.3.3 | Unsigned32 | read-write | current |
| dvbRcsInstallCwPower OBJECT-TYPE IDU TX output level when the IDU is configured to send CW. The resolution is 0.1 dBm and the accuracy is +/- 1 dBm. Reconfiguration is applied immediately to a CW. | 1.3.6.1.2.1.10.239.1.1.3.4 | Integer32 | read-write | current |
| dvbRcsInstallCoPolReading OBJECT-TYPE Co-polarization measured value during installation procedure (in 0.1 dB). | 1.3.6.1.2.1.10.239.1.1.3.5 | Unsigned32 | read-write | current |
| dvbRcsInstallXPolReading OBJECT-TYPE Cross-polarization measured value during installation procedure (in 0.1 dB). | 1.3.6.1.2.1.10.239.1.1.3.6 | Unsigned32 | read-write | current |
| dvbRcsInstallCoPolTarget OBJECT-TYPE Co-polarization target value during installation procedure (in 0.1 dB). | 1.3.6.1.2.1.10.239.1.1.3.7 | Unsigned32 | read-write | current |
| dvbRcsInstallXPolTarget OBJECT-TYPE Cross-polarization target value during installation procedure (in 0.1 dB). | 1.3.6.1.2.1.10.239.1.1.3.8 | Unsigned32 | read-write | current |
| dvbRcsInstallStandByDuration OBJECT-TYPE Time to wait in stand-by mode (in seconds). | 1.3.6.1.2.1.10.239.1.1.3.9 | Unsigned32 | read-write | current |
| dvbRcsInstallTargetEsN0 OBJECT-TYPE This value describes the wanted Es/N0 value that enables operation of the return link with the required error performance. The values shall be given in tenth of dB and the initial value shall be equal to 7 dB. The range shall be from 0 dB to 31.5 dB, with a precision of 0.1 dB. | 1.3.6.1.2.1.10.239.1.1.3.10 | Unsigned32 (0..315) | read-write | current |
| dvbRcsRcstQos OBJECT-IDENTITY | 1.3.6.1.2.1.10.239.1.1.4 | |||
| dvbRcsPktClassTable OBJECT-TYPE This table describes the packet classification used in the DVB-RCS terminal. The number of entries is specified by dvbRcsPktClassIndex. | 1.3.6.1.2.1.10.239.1.1.4.1 | not-accessible | current | |
| dvbRcsPktClassEntry OBJECT-TYPE An entry in the packet classification table. One object type of each entry may have a value in the active range (a non-default value). The other object types are then assumed to be set to 'inactive'. The entry with the lowest index value takes precedence when classifying a packet. | 1.3.6.1.2.1.10.239.1.1.4.1.1 | not-accessible | current | |
| dvbRcsPktClassIndex OBJECT-TYPE Index automatically incremented by one at row creation. | 1.3.6.1.2.1.10.239.1.1.4.1.1.1 | Unsigned32 (1..64) | not-accessible | current |
| dvbRcsPktClassDscpLow OBJECT-TYPE This object specifies the low value of a range of Diffserv Code Point (DSCP) values to which a packet is compared. | 1.3.6.1.2.1.10.239.1.1.4.1.1.2 | Dscp | read-create | current |
| dvbRcsPktClassDscpHigh OBJECT-TYPE This object specifies the high value of a range of Diffserv Code Point (DSCP) values to which a packet is compared. | 1.3.6.1.2.1.10.239.1.1.4.1.1.3 | Dscp | read-create | current |
| dvbRcsPktClassDscpMarkValue OBJECT-TYPE This object is the Diffserv Code Point (DSCP) value used to mark the packet; -1 indicates no DSCP marking. Possible DSCP marks values are (0..63) | 1.3.6.1.2.1.10.239.1.1.4.1.1.4 | DscpOrAny | read-create | current |
| dvbRcsPktClassIpProtocol OBJECT-TYPE This object specifies the IP protocol to which a packet is compared. A value of 255 means match all. | 1.3.6.1.2.1.10.239.1.1.4.1.1.5 | Unsigned32 (0..255) | read-create | current |
| dvbRcsPktClassSrcInetAddressType OBJECT-TYPE The type of Internet address of dvbRcsPktClassSrcInetAddress. If the packet class source Internet address is unassigned or unknown, then the value of this object is unknown(0). | 1.3.6.1.2.1.10.239.1.1.4.1.1.6 | InetAddressType | read-create | current |
| dvbRcsPktClassSrcInetAddress OBJECT-TYPE This object specifies the IP source address to which a packet is compared. If the packet class has no source Internet address assigned or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsPktClassSrcInetAddressType object. | 1.3.6.1.2.1.10.239.1.1.4.1.1.7 | InetAddress | read-create | current |
| dvbRcsPktClassSrcInetAddressPrefixLength OBJECT-TYPE Prefix length of the IP source address that will be matched for this packet class. A value of zero indicates that the selectivity is inactive. | 1.3.6.1.2.1.10.239.1.1.4.1.1.8 | InetAddressPrefixLength | read-create | current |
| dvbRcsPktClassDstInetAddressType OBJECT-TYPE The type of Internet address of dvbRcsPktClassDstInetAddress. If the packet class destination Internet address is unassigned or unknown, then the value of this object is unknown(0). | 1.3.6.1.2.1.10.239.1.1.4.1.1.9 | InetAddressType | read-create | current |
| dvbRcsPktClassDstInetAddress OBJECT-TYPE This object specifies the IP destination address to which a packet is compared. If the packet class has no destination Internet address assigned or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsPktClassDstInetAddressType object. | 1.3.6.1.2.1.10.239.1.1.4.1.1.10 | InetAddress | read-create | current |
| dvbRcsPktClassDstInetAddressPrefixLength OBJECT-TYPE Prefix length of the IP source address that will be matched for this packet class. A value of zero indicates that the selectivity is inactive. | 1.3.6.1.2.1.10.239.1.1.4.1.1.11 | InetAddressPrefixLength | read-create | current |
| dvbRcsPktClassSrcPortLow OBJECT-TYPE This object specifies the low range of the source port to which a packet is compared. A value of 0 indicates that the selectivity is inactive. | 1.3.6.1.2.1.10.239.1.1.4.1.1.12 | InetPortNumber | read-create | current |
| dvbRcsPktClassSrcPortHigh OBJECT-TYPE This object specifies the high range of the source port to which a packet is compared. A value of 0 indicates that the selectivity is inactive. | 1.3.6.1.2.1.10.239.1.1.4.1.1.13 | InetPortNumber | read-create | current |
| dvbRcsPktClassDstPortLow OBJECT-TYPE This object specifies the low range of the destination port to which a packet is compared. A value of 0 indicates that the selectivity is inactive. | 1.3.6.1.2.1.10.239.1.1.4.1.1.14 | InetPortNumber | read-create | current |
| dvbRcsPktClassDstPortHigh OBJECT-TYPE This object specifies the high range of the destination port to which a packet is compared. A value of 0 indicates that the selectivity is inactive. | 1.3.6.1.2.1.10.239.1.1.4.1.1.15 | InetPortNumber | read-create | current |
| dvbRcsPktClassVlanUserPri OBJECT-TYPE This object specifies the VLAN User Priority to which a packet is compared. A value of -1 indicates that the selectivity is inactive. | 1.3.6.1.2.1.10.239.1.1.4.1.1.16 | Integer32 (-1..7) | read-create | current |
| dvbRcsPktClassPhbAssociation OBJECT-TYPE Associate the filter entry to a specific PHB (refer to dvbRcsPhbIdentifier). | 1.3.6.1.2.1.10.239.1.1.4.1.1.17 | Unsigned32 (0..65535) | read-create | current |
| dvbRcsPktClassRowStatus OBJECT-TYPE The status of this conceptual row. All writable objects in this row may be modified at any time. | 1.3.6.1.2.1.10.239.1.1.4.1.1.18 | RowStatus | read-create | current |
| dvbRcsPhbMappingTable OBJECT-TYPE This table is a list of Per-Hop Behavior (PHB) MIB entries. It describes the PHB mapping to the Request Class. | 1.3.6.1.2.1.10.239.1.1.4.2 | not-accessible | current | |
| dvbRcsPhbMappingEntry OBJECT-TYPE An entry in the PHB mapping table. | 1.3.6.1.2.1.10.239.1.1.4.2.1 | not-accessible | current | |
| dvbRcsPhbIdentifier OBJECT-TYPE Identification of the Per-Hop Behavior (PHB). It follows the unsigned 16-bit binary encoding as specified in RFC 3140. The value 0 designates the Default PHB. | 1.3.6.1.2.1.10.239.1.1.4.2.1.1 | Unsigned32 (0..65535) | not-accessible | current |
| dvbRcsPhbName OBJECT-TYPE The name of the Per-Hop Behavior (PHB). | 1.3.6.1.2.1.10.239.1.1.4.2.1.2 | SnmpAdminString | read-create | current |
| dvbRcsPhbRequestClassAssociation OBJECT-TYPE This object is an association of this Per-Hop Behavior (PHB) to a Request Class (by reference to a Request Class index). | 1.3.6.1.2.1.10.239.1.1.4.2.1.3 | Unsigned32 (1..16) | read-create | current |
| dvbRcsPhbMappingRowStatus OBJECT-TYPE The status of this conceptual row. All writable objects in this row may be modified at any time. | 1.3.6.1.2.1.10.239.1.1.4.2.1.4 | RowStatus | read-create | current |
| dvbRcsRequestClassTable OBJECT-TYPE This table is a list of Request Class entries. This class describes the layer 2 QoS objects. | 1.3.6.1.2.1.10.239.1.1.4.3 | not-accessible | current | |
| dvbRcsRequestClassEntry OBJECT-TYPE An entry in the Request Class table. | 1.3.6.1.2.1.10.239.1.1.4.3.1 | not-accessible | current | |
| dvbRcsRequestClassIndex OBJECT-TYPE Index of the Request Class table. A total of 16 entries are supported. | 1.3.6.1.2.1.10.239.1.1.4.3.1.1 | Unsigned32 (1..16) | not-accessible | current |
| dvbRcsRequestClassName OBJECT-TYPE Name of the Request Class. | 1.3.6.1.2.1.10.239.1.1.4.3.1.2 | SnmpAdminString | read-create | current |
| dvbRcsRequestClassChanId OBJECT-TYPE Channel ID of the Request Class. | 1.3.6.1.2.1.10.239.1.1.4.3.1.3 | Unsigned32 (0..15) | read-create | current |
| dvbRcsRequestClassVccVpi OBJECT-TYPE Defines the VPI used for the Request Class (ATM profile). | 1.3.6.1.2.1.10.239.1.1.4.3.1.4 | Unsigned32 (0..255) | read-create | current |
| dvbRcsRequestClassVccVci OBJECT-TYPE Defines the VCI used for the Request Class (ATM profile). | 1.3.6.1.2.1.10.239.1.1.4.3.1.5 | Unsigned32 (0..65535) | read-create | current |
| dvbRcsRequestClassPidPoolReference OBJECT-TYPE Reference to the Packet IDentifier (PID) pool applicable for the Request Class. | 1.3.6.1.2.1.10.239.1.1.4.3.1.6 | Unsigned32 (1..16) | read-create | current |
| dvbRcsRequestClassCra OBJECT-TYPE Defines the Continuous Rate Assignment (CRA) level for the Request Class in bits per second (bit/s). | 1.3.6.1.2.1.10.239.1.1.4.3.1.7 | Unsigned32 | read-create | current |
| dvbRcsRequestClassRbdcMax OBJECT-TYPE Maximum Rate-Based Dynamic Capacity (RBDC) that can be requested for the Request Class, in number of 2 kbit/s. | 1.3.6.1.2.1.10.239.1.1.4.3.1.8 | Unsigned32 | read-create | current |
| dvbRcsRequestClassRbdcTimeout OBJECT-TYPE Persistence of the Rate-Based Dynamic Capacity (RBDC) request, expressed in superframes. | 1.3.6.1.2.1.10.239.1.1.4.3.1.9 | Unsigned32 | read-create | current |
| dvbRcsRequestClassVbdcMax OBJECT-TYPE Maximum Volume-Based Dynamic Capacity (VBDC) that can be allocated to the Request Class, in payload units (one ATM cell or one MPEG packet) per superframe. | 1.3.6.1.2.1.10.239.1.1.4.3.1.10 | Unsigned32 | read-create | current |
| dvbRcsRequestClassVbdcTimeout OBJECT-TYPE Time after which the RCST considers that the pending requests are lost. The RCST may issue new requests for that traffic. Volume-Based Dynamic Capacity (VBDC) Timeout is expressed in superframes. | 1.3.6.1.2.1.10.239.1.1.4.3.1.11 | Unsigned32 | read-create | current |
| dvbRcsRequestClassVbdcMaxBackLog OBJECT-TYPE Volume-Based Dynamic Capacity (VBDC) back log per Request Class (expressed in bytes). | 1.3.6.1.2.1.10.239.1.1.4.3.1.12 | Unsigned32 | read-create | current |
| dvbRcsRequestClassRowStatus OBJECT-TYPE The status of this conceptual row. It is not possible to change values in a row of this table while the row is active. | 1.3.6.1.2.1.10.239.1.1.4.3.1.13 | RowStatus | read-create | current |
| dvbRcsPidPoolTable OBJECT-TYPE This table contains the Packet IDentifier (PID) pools. For the MPEG profile, several Request Classes may be mapped within a pool of several PIDs to allow Section Packing across several Request Classes. A PID value may occur in more than one PID pool. Each PID value can effectively occur only once in each pool. | 1.3.6.1.2.1.10.239.1.1.4.4 | not-accessible | current | |
| dvbRcsPidPoolEntry OBJECT-TYPE An entry in the PID pool table. | 1.3.6.1.2.1.10.239.1.1.4.4.1 | not-accessible | current | |
| dvbRcsPidPoolIndex OBJECT-TYPE Index of the PID pool in the PID pool table. | 1.3.6.1.2.1.10.239.1.1.4.4.1.1 | Unsigned32 (1..16) | not-accessible | current |
| dvbRcsPidIndex OBJECT-TYPE Index of the PID entry within the PID pool. | 1.3.6.1.2.1.10.239.1.1.4.4.1.2 | Unsigned32 (1..16) | not-accessible | current |
| dvbRcsPidValue OBJECT-TYPE Defines one of the PIDs to be used in a PID pool of dvbRcsPidPoolIndex. A PID value may occur in more than one PID pool. Each PID value can effectively occur only once in each pool. | 1.3.6.1.2.1.10.239.1.1.4.4.1.3 | Unsigned32 (0..8191) | read-create | current |
| dvbRcsPidPoolRowStatus OBJECT-TYPE The status of this conceptual row. All writable objects in this row may be modified at any time. | 1.3.6.1.2.1.10.239.1.1.4.4.1.4 | RowStatus | read-create | current |
| dvbRcsQosGlobalRbdcMax OBJECT-TYPE Global maximum RBDC that can be requested for the RCST, in number of 2 kbit/s. | 1.3.6.1.2.1.10.239.1.1.4.5 | Unsigned32 | read-write | current |
| dvbRcsQosGlobalVbdcMax OBJECT-TYPE Global maximum VBDC that can be allocated to the RCST, in payload units (one ATM cell or one MPEG packet) per superframe. | 1.3.6.1.2.1.10.239.1.1.4.6 | Unsigned32 | read-write | current |
| dvbRcsQosGlobalVbdcMaxBackLog OBJECT-TYPE Global VBDC back log at the RCST level (expressed in bytes). It is used only if the VBDC back log is not configured in the Request Class (expressed in bytes). | 1.3.6.1.2.1.10.239.1.1.4.7 | Unsigned32 | read-write | current |
| dvbRcsQosChannelIdStrictDispatching OBJECT-TYPE Indicates whether the RCST will strictly follow RC association when signaled through Channel_ID in the TBTP: (0)- no strict association (1)- strict association | 1.3.6.1.2.1.10.239.1.1.4.8 | INTEGER {notStrict(0), strict(1)} | read-write | current |
| dvbRcsRcstControl OBJECT-IDENTITY | 1.3.6.1.2.1.10.239.1.1.5 | |||
| dvbRcsCtrlRebootCommand OBJECT-TYPE This variable shall force the RCST to reboot: (1)- idle (2)- normal reboot (from current software load) (3)- reboot from alternate load (swap to alternate load before reboot) | 1.3.6.1.2.1.10.239.1.1.5.1 | INTEGER {idle(1), normal(2), alternate(3)} | read-write | current |
| dvbRcsCtrlRcstTxDisable OBJECT-TYPE This variable shall force the RCST to stop transmission (transmit disabled as defined in SatLabs System Recommendations): (1)- idle (2)- initiate Tx Disabled | 1.3.6.1.2.1.10.239.1.1.5.2 | INTEGER {idle(1), disable(2)} | read-write | current |
| dvbRcsCtrlUserTrafficDisable OBJECT-TYPE This variable shall disable user traffic (only RCST management traffic can be transmitted): (1)- idle (2)- disable user traffic | 1.3.6.1.2.1.10.239.1.1.5.3 | INTEGER {idle(1), disable(2)} | read-write | current |
| dvbRcsCtrlCwEnable OBJECT-TYPE This variable will force the RCST to start transmission of CW, if the RCST is first set to the installation state and is properly configured for CW transmission: (1)- off (2)- on | 1.3.6.1.2.1.10.239.1.1.5.4 | INTEGER {off(1), on(2)} | read-write | current |
| dvbRcsCtrlOduTxReferenceEnable OBJECT-TYPE Enables activation and deactivation of the 10 MHz reference clock in the Tx IFL cable: (1) off (2) on | 1.3.6.1.2.1.10.239.1.1.5.5 | INTEGER {off(1), on(2)} | read-write | current |
| dvbRcsCtrlOduTxDCEnable OBJECT-TYPE Enables activation and deactivation of DC in the Tx IFL cable: (1) off (2) on | 1.3.6.1.2.1.10.239.1.1.5.6 | INTEGER {off(1), on(2)} | read-write | current |
| dvbRcsCtrlOduRxDCEnable OBJECT-TYPE Enables activation and deactivation of DC in the Rx IFL cable: (1) off (2) on | 1.3.6.1.2.1.10.239.1.1.5.7 | INTEGER {off(1), on(2)} | read-write | current |
| dvbRcsCtrlDownloadFileCommand OBJECT-TYPE This variable will initiate an RCST configuration file download process: (1) idle (2) download RCST configuration file from TFTP/FTP server (3) download RCST installation log file from TFTP/FTP server (INSTALL_LOG feature) | 1.3.6.1.2.1.10.239.1.1.5.8 | INTEGER {idle(1), config(2), installationLog(3)} | read-write | current |
| dvbRcsCtrlUploadFileCommand OBJECT-TYPE This variable will initiate an RCST upload process: (1) idle (2) upload RCST configuration file to TFTP/FTP server (3) upload RCST event/alarm log file to TFTP/FTP server (4) upload RCST installation log file to TFTP/FTP server (INSTALL_LOG feature) | 1.3.6.1.2.1.10.239.1.1.5.9 | INTEGER {idle(1), config(2), eventAlarm(3), installationLog(4)} | read-write | current |
| dvbRcsCtrlActivateConfigFileCommand OBJECT-TYPE Triggers the RCST to use the configuration file and update its parameters accordingly. Some RCST implementations may require a reboot for the parameters to take effect (vendor specific). (1) idle (2) activate | 1.3.6.1.2.1.10.239.1.1.5.10 | INTEGER {idle(1), activate(2)} | read-write | current |
| dvbRcsCtrlRcstLogonCommand OBJECT-TYPE This variable will initiate an RCST logon: (1) idle (2) initiate RCST logon | 1.3.6.1.2.1.10.239.1.1.5.11 | INTEGER {idle(1), logon(2)} | read-write | current |
| dvbRcsCtrlRcstLogoffCommand OBJECT-TYPE This variable will initiate an RCST logoff: (1) idle (2) initiate RCST logoff | 1.3.6.1.2.1.10.239.1.1.5.12 | INTEGER {idle(1), logoff(2)} | read-write | current |
| dvbRcsCtrlRcstRxReacquire OBJECT-TYPE This variable will force the RCST to acquire the forward link and start receiving: (1) idle (2) reacquire forward link | 1.3.6.1.2.1.10.239.1.1.5.13 | INTEGER {idle(1), reacquireForwardLink(2)} | read-write | current |
| dvbRcsRcstState OBJECT-IDENTITY | 1.3.6.1.2.1.10.239.1.1.6 | |||
| dvbRcsRcstMode OBJECT-TYPE Identifies the current mode of the RCST and allows the RCST to return to the installation mode when needed. Values for the RCST mode are: Installation (0) Operational (1) | 1.3.6.1.2.1.10.239.1.1.6.1 | INTEGER {installation(0), operational(1)} | read-write | current |
| dvbRcsRcstFaultStatus OBJECT-TYPE Provides the fault status of the terminal. The fault status management is vendor specific. Values for the fault status are: no fault (0) fault (1) | 1.3.6.1.2.1.10.239.1.1.6.2 | INTEGER {nofault(0), fault(1)} | read-only | current |
| dvbRcsRcstFwdLinkStatus OBJECT-TYPE Provides the status of the RCST forward link. Values for the forward link status are: Not acquired (0) Acquired (1) | 1.3.6.1.2.1.10.239.1.1.6.3 | INTEGER {notAcquired(0), acquired(1)} | read-only | current |
| dvbRcsRcstRtnLinkStatus OBJECT-TYPE Provides the status of the RCST return link. Values for the return link status are: Logged-off (0) Logged-on (1) | 1.3.6.1.2.1.10.239.1.1.6.4 | INTEGER {loggedOff(0), loggedOn(1)} | read-only | current |
| dvbRcsRcstLogUpdated OBJECT-TYPE Indicates the existence of an updated event log file: No update (0) Event Log file updated (1) The RCST should remove the 'Event Log file updated' indication as the log file is fetched by the NCC. | 1.3.6.1.2.1.10.239.1.1.6.5 | INTEGER {noUpdate(0), logfileUpdated(1)} | read-only | current |
| dvbRcsRcstCurrentSoftwareVersion OBJECT-TYPE Current RCST software version. | 1.3.6.1.2.1.10.239.1.1.6.6 | SnmpAdminString | read-only | current |
| dvbRcsRcstAlternateSoftwareVersion OBJECT-TYPE Alternate (backup/new) RCST software version. | 1.3.6.1.2.1.10.239.1.1.6.7 | SnmpAdminString | read-only | current |
| dvbRcsRcstActivatedConfigFileVersion OBJECT-TYPE Version of the most recently activated configuration file. The version is vendor specific. | 1.3.6.1.2.1.10.239.1.1.6.8 | SnmpAdminString | read-only | current |
| dvbRcsRcstDownloadedConfigFileVersion OBJECT-TYPE Version of the most recently downloaded configuration file. Version is vendor specific. If the value is different from dvbRcsRcstActivatedConfigFileVersion, it is pending for activation. | 1.3.6.1.2.1.10.239.1.1.6.9 | SnmpAdminString | read-only | current |
| dvbRcsFwdLink OBJECT-IDENTITY | 1.3.6.1.2.1.10.239.1.2 | |||
| dvbRcsFwdConfig OBJECT-IDENTITY | 1.3.6.1.2.1.10.239.1.2.1 | |||
| dvbRcsFwdStartTable OBJECT-TYPE Lists forward link attachment points (e.g., different for installation and operation). The table describes the forward link parameters used for the start-up stream with the NCC. | 1.3.6.1.2.1.10.239.1.2.1.1 | not-accessible | current | |
| dvbRcsFwdStartEntry OBJECT-TYPE An entry in the Forward Link Start Configuration table. | 1.3.6.1.2.1.10.239.1.2.1.1.1 | not-accessible | current | |
| dvbRcsFwdStartIndex OBJECT-TYPE Index of the Forward Link StartConfig table. | 1.3.6.1.2.1.10.239.1.2.1.1.1.1 | Unsigned32 (1..8) | not-accessible | current |
| dvbRcsFwdStartPopId OBJECT-TYPE Population identifier associated with the start-up forward link: -1: any (auto) 0-65535: specific StartPopId If 'any' is set, the RCST will assume membership of any announced population ID and will commence with logon in accordance with this assumption. | 1.3.6.1.2.1.10.239.1.2.1.1.1.2 | Integer32 (-1..65535) | read-create | current |
| dvbRcsFwdStartFrequency OBJECT-TYPE Frequency of the start transponder carrying a Network Information Table to which any RCST shall trigger to acquire forward link. Its value shall be given in multiples of 100 kHz. | 1.3.6.1.2.1.10.239.1.2.1.1.1.3 | Unsigned32 | read-create | current |
| dvbRcsFwdStartPolar OBJECT-TYPE 2-bit field giving the polarization of the start transponder carrying a Network Information Table to which any RCST shall trigger to acquire forward link: 00: linear and horizontal 01: linear and vertical 10: circular left 11: circular right | 1.3.6.1.2.1.10.239.1.2.1.1.1.4 | INTEGER {linearHorizontal(0), linearVertical(1), circularLeft(2), circularRight(3)} | read-create | current |
| dvbRcsFwdStartFormat OBJECT-TYPE Specifies the transmission format standard applied for the startup stream. The start transport stream carries a Network Information Table that the RCST uses for acquiring the forward link signaling. Supported values are: -1: unspecified (automatic format acquisition is assumed) 0: DVB-S (support of this value is mandatory if DVB-S support is claimed) 1: DVB-S2 with CCM (support of this value is mandatory if DVB-S2 CCM support is claimed) 2: DVB-S2 with VCM or ACM (support of this value is mandatory if DVB-S2 ACM support is claimed) This allows the RCST to discriminate between CCM and VCM/ACM when selecting the forward link. The support of automatic format selection is optional. One or several of the other format selections must be supported, according to the claimed SatLabs profile support. | 1.3.6.1.2.1.10.239.1.2.1.1.1.5 | INTEGER {auto(-1), dvbs(0), dvbs2ccm(1), dvbs2acm(2)} | read-create | current |
| dvbRcsFwdStartRolloff OBJECT-TYPE Specifies the receive filter roll-off applied on the start transponder. The start transponder carries a Network Information Table that the RCST uses for acquiring the forward link signaling. Supported values are: 0: any (auto) 1: 0.20 2: 0.25 3: 0.35 | 1.3.6.1.2.1.10.239.1.2.1.1.1.6 | INTEGER {autoRolloff(0), rolloff020(1), rolloff025(2), rolloff035(3)} | read-create | current |
| dvbRcsFwdStartSymbolRate OBJECT-TYPE Specifies the symbol rate on the start transponder carrying a Network Information Table to which any RCST shall trigger to acquire forward link. Its value shall be given in multiples of 100 symbols/s. | 1.3.6.1.2.1.10.239.1.2.1.1.1.7 | Unsigned32 | read-create | current |
| dvbRcsFwdStartInnerFec OBJECT-TYPE Specifies the inner Forward Error Correction used on the start transponder carrying a Network Information Table to which any RCST shall trigger to acquire forward link. Supported values are: autoFec (-1), fecRate1/2 (0), fecRate2/3 (1), fecRate3/4 (2), fecRate5/6 (3), fecRate7/8 (4), fecRate8/9 (5), fecRate3/5 (6), fecRate4/5 (7), fecRate9/10 (8), fecRate2/5 (9), fecRate1/3 (10), fecRate1/4 (11), noInnerCode (12) The support of autoFec is optional. | 1.3.6.1.2.1.10.239.1.2.1.1.1.8 | INTEGER {autoFec(-1), fecRate12(0), fecRate23(1), fecRate34(2), fecRate56(3), fecRate78(4), fecRate89(5), fecRate35(6), fecRate45(7), fecRate910(8), fecRate25(9), fecRate13(10), fecRate14(11), noInnerCode(12)} | read-create | current |
| dvbRcsFwdStartRowStatus OBJECT-TYPE The status of this conceptual row. It is not possible to change values in a row of this table while the row is active. | 1.3.6.1.2.1.10.239.1.2.1.1.1.9 | RowStatus | read-create | current |
| dvbRcsFwdStatus OBJECT-IDENTITY | 1.3.6.1.2.1.10.239.1.2.2 | |||
| dvbRcsFwdStatusPopId OBJECT-TYPE Population identifier applied at log-on: 0-65535: specific StartPopId If the RCST was allowed to logon with any population, the RCST will report the base number of the announced population ID indicated by the RCS Map Table linkage descriptor used at logon. | 1.3.6.1.2.1.10.239.1.2.2.1 | Unsigned32 (0..65535) | read-only | current |
| dvbRcsFwdStatusTable OBJECT-TYPE This table describes the current status of Forward Link interfaces. | 1.3.6.1.2.1.10.239.1.2.2.2 | not-accessible | current | |
| dvbRcsFwdStatusEntry OBJECT-TYPE An entry in the forward link status table. Each entry is associated with a physical interface. An RCST shall support at least one entry. | 1.3.6.1.2.1.10.239.1.2.2.2.1 | not-accessible | current | |
| dvbRcsFwdStatusIndex OBJECT-TYPE Index of the forward link status table. | 1.3.6.1.2.1.10.239.1.2.2.2.1.1 | Unsigned32 (1..8) | not-accessible | current |
| dvbRcsFwdStatusIfReference OBJECT-TYPE Cross reference to the interface table. | 1.3.6.1.2.1.10.239.1.2.2.2.1.2 | Unsigned32 (1..8) | read-only | current |
| dvbRcsFwdStatusNetId OBJECT-TYPE Interactive network identifier of the forward link (from the RCS Map Table). | 1.3.6.1.2.1.10.239.1.2.2.2.1.3 | Unsigned32 | read-only | current |
| dvbRcsFwdStatusNetName OBJECT-TYPE The name of the interactive network of the forward link (from the RCS Map Table). | 1.3.6.1.2.1.10.239.1.2.2.2.1.4 | SnmpAdminString | read-only | current |
| dvbRcsFwdStatusFormat OBJECT-TYPE Specifies the transmission format applied on the forward link. Supported values are (from RCS Map Table): 0: DVB-S 1: DVB-S2 using CCM 2: DVB-S2 using VCM or ACM 3: reserved | 1.3.6.1.2.1.10.239.1.2.2.2.1.5 | INTEGER {dvbs(0), dvbs2ccm(1), dvbs2acm(2), reservedFormat(3)} | read-only | current |
| dvbRcsFwdStatusFrequency OBJECT-TYPE An estimate of the frequency of the forward link. Its value shall be given in multiples of 100 kHz. | 1.3.6.1.2.1.10.239.1.2.2.2.1.6 | Unsigned32 | read-only | current |
| dvbRcsFwdStatusPolar OBJECT-TYPE 2-bit field giving the polarization of the forward link Supported values are (from RCS Map Table): 00: linear and horizontal 01: linear and vertical 10: circular left 11: circular right | 1.3.6.1.2.1.10.239.1.2.2.2.1.7 | INTEGER {linearHorizontal(0), linearVertical(1), circularLeft(2), circularRight(3)} | read-only | current |
| dvbRcsFwdStatusInnerFec OBJECT-TYPE Specifies the inner Forward Error Correction used on the forward link for transmission to the RCST. Supported values are: unknown (-1), fecRate1/2 (0), fecRate2/3 (1), fecRate3/4 (2), fecRate5/6 (3), fecRate7/8 (4), fecRate8/9 (5), fecRate3/5 (6), fecRate4/5 (7), fecRate9/10 (8), fecRate2/5 (9), fecRate1/3 (10), fecRate1/4 (11), noInnerCode (12) The RCST will report a value that has been used for transmission to the RCST within the most recent 60 seconds. If this is not relevant, the RCST will report 'unknown'. | 1.3.6.1.2.1.10.239.1.2.2.2.1.8 | INTEGER {unknown(-1), fecRate12(0), fecRate23(1), fecRate34(2), fecRate56(3), fecRate78(4), fecRate89(5), fecRate35(6), fecRate45(7), fecRate910(8), fecRate25(9), fecRate13(10), fecRate14(11), noInnerCode(12)} | read-only | current |
| dvbRcsFwdStatusSymbolRate OBJECT-TYPE An estimate of the symbol rate of the forward link. Its value shall be given in multiples of 100 symbols/s. | 1.3.6.1.2.1.10.239.1.2.2.2.1.9 | Unsigned32 | read-only | current |
| dvbRcsFwdStatusRolloff OBJECT-TYPE An estimate of the roll-off applied on the forward link. Supported values are: 0: undefined 1: 0.20 2: 0.25 3: 0.35 | 1.3.6.1.2.1.10.239.1.2.2.2.1.10 | INTEGER {undefRolloff(0), rolloff020(1), rolloff025(2), rolloff035(3)} | read-only | current |
| dvbRcsFwdStatusModulation OBJECT-TYPE Indicates the modulation on the forward link used for transmission to the RCST. Supported values are: 0: unknown 1: BPSK 2: QPSK 3: 8PSK 4: 16APSK 5: 32APSK The RCST will report a value that has been used for transmission to the RCST within the most recent 60 seconds. If this is not relevant, the RCST will report 'unknown'. | 1.3.6.1.2.1.10.239.1.2.2.2.1.11 | INTEGER {unknown(0), mBPSK(1), mQPSK(2), m8PSK(3), m16APSK(4), m32APSK(5)} | read-only | current |
| dvbRcsFwdStatusFecFrame OBJECT-TYPE Indicates the frame length used on the forward link for transmission to the RCST. Supported values are: 0: Unknown 1: Short frame 2: Normal frame The RCST will report a value that has been used for transmission to the RCST within the most recent 60 seconds. If this is not relevant, the RCST will report 'unknown'. | 1.3.6.1.2.1.10.239.1.2.2.2.1.12 | INTEGER {unknown(0), shortframe(1), longframe(2)} | read-only | current |
| dvbRcsFwdStatusPilot OBJECT-TYPE Indicates whether pilots are used on the forward link for transmission to the RCST. Supported values are: 0: Unknown 1: Pilots are not used 2: Pilots are used The RCST will report a value that has been used for transmission to the RCST within the most recent 60 seconds. If this is not relevant, the RCST will report 'unknown'. | 1.3.6.1.2.1.10.239.1.2.2.2.1.13 | INTEGER {unknown(0), pilotNotused(1), pilotUsed(2)} | read-only | current |
| dvbRcsFwdStatusBer OBJECT-TYPE Provides the RCST BER on the Forward Link in log10 units. | 1.3.6.1.2.1.10.239.1.2.2.2.1.14 | Integer32 | read-only | current |
| dvbRcsFwdStatusCnr OBJECT-TYPE Provides the RCST CNR on the Forward Link in 0.1 dB units. | 1.3.6.1.2.1.10.239.1.2.2.2.1.15 | Integer32 | read-only | current |
| dvbRcsFwdStatusRxPower OBJECT-TYPE Provides the power level of the forward link as received at the IDU, in 0.1 dBm units. | 1.3.6.1.2.1.10.239.1.2.2.2.1.16 | Integer32 | read-only | current |
| dvbRcsRtnLink OBJECT-IDENTITY | 1.3.6.1.2.1.10.239.1.3 | |||
| dvbRcsRtnConfig OBJECT-IDENTITY | 1.3.6.1.2.1.10.239.1.3.1 | |||
| dvbRcsRtnConfigMaxEirp OBJECT-TYPE Max Equivalent Isotropic Radiated Power (EIRP) of the RCST, given in resolution of 0.1 dBm and applied when the IDU can, itself, set the necessary IDU TX output level, e.g., when using a BUC that has a power level detector and that provides sufficient feedback to the IDU. | 1.3.6.1.2.1.10.239.1.3.1.1 | Integer32 | read-write | current |
| dvbRcsRtnConfigDefIfLevel OBJECT-TYPE IDU TX output level applied in case the dvbRcsRtnConfigMaxEirp cannot be used. The resolution is 0.1 dBm and the accuracy is +/- 1 dBm. | 1.3.6.1.2.1.10.239.1.3.1.2 | Integer32 | read-write | current |
| dvbRcsRtnStatus OBJECT-IDENTITY | 1.3.6.1.2.1.10.239.1.3.2 | |||
| dvbRcsRtnStatusEbN0 OBJECT-TYPE The EbN0 value reported for the return link, referenced to the regular SYNC burst transmission, in 0.1 dB units. | 1.3.6.1.2.1.10.239.1.3.2.1 | Integer32 | read-only | current |
| dvbRcsRtnStatusSFDuration OBJECT-TYPE The duration of the currently applied return link superframe structure, in tenths of milliseconds. | 1.3.6.1.2.1.10.239.1.3.2.2 | Unsigned32 (250..7500) | read-only | current |
| dvbRcsRtnStatusPayloadUnit OBJECT-TYPE Indicates if the payload unit used for the return link is ATM or MPEG. | 1.3.6.1.2.1.10.239.1.3.2.3 | INTEGER {unitATM(0), unitMPEG(1)} | read-only | current |
| dvbRcsConformance OBJECT-IDENTITY | 1.3.6.1.2.1.10.239.2 | |||
| dvbRcsRcstGroups OBJECT-IDENTITY | 1.3.6.1.2.1.10.239.2.1 | |||
| dvbRcsRcstCompliances OBJECT-IDENTITY | 1.3.6.1.2.1.10.239.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| dvbRcsRcstSystemGroup OBJECT-GROUP A collection of objects providing information applicable for basic device management support. | 1.3.6.1.2.1.10.239.2.1.1 | current |
| dvbRcsRcstNetworkGroup OBJECT-GROUP A collection of objects providing basic networking management support. | 1.3.6.1.2.1.10.239.2.1.2 | current |
| dvbRcsRcstExtNetworkGroup OBJECT-GROUP A collection of objects providing extended networking management support. | 1.3.6.1.2.1.10.239.2.1.3 | current |
| dvbRcsRcstDnsGroup OBJECT-GROUP A collection of objects providing DNS management support. | 1.3.6.1.2.1.10.239.2.1.4 | current |
| dvbRcsRcstInstallGroup OBJECT-GROUP A collection of objects providing information applicable for basic installation support. | 1.3.6.1.2.1.10.239.2.1.5 | current |
| dvbRcsRcstExtInstallGroup OBJECT-GROUP A collection of objects providing extended device installation support. | 1.3.6.1.2.1.10.239.2.1.6 | current |
| dvbRcsRcstQosGroup OBJECT-GROUP A collection of objects providing basic access to QoS configuration data. | 1.3.6.1.2.1.10.239.2.1.7 | current |
| dvbRcsRcstEnhancedClassifierGroup OBJECT-GROUP A collection of objects providing support for management of the enhanced classifier. | 1.3.6.1.2.1.10.239.2.1.8 | current |
| dvbRcsRcstMpegQosGroup OBJECT-GROUP A collection of objects providing access to MPEG-related link QoS configuration data. | 1.3.6.1.2.1.10.239.2.1.9 | current |
| dvbRcsRcstGlobalQosGroup OBJECT-GROUP A collection of objects providing access to global RCST QoS configuration data. | 1.3.6.1.2.1.10.239.2.1.10 | current |
| dvbRcsRcstStrictQosGroup OBJECT-GROUP A collection of objects allowing management of strict channel ID dispatching. | 1.3.6.1.2.1.10.239.2.1.11 | current |
| dvbRcsRcstControlGroup OBJECT-GROUP A collection of objects allowing basic RCST control. | 1.3.6.1.2.1.10.239.2.1.12 | current |
| dvbRcsRcstExtControlGroup OBJECT-GROUP A collection of objects allowing extended RCST control. | 1.3.6.1.2.1.10.239.2.1.13 | current |
| dvbRcsRcstStateGroup OBJECT-GROUP A collection of objects allowing access to RCST state. | 1.3.6.1.2.1.10.239.2.1.14 | current |
| dvbRcsFwdConfigGroup OBJECT-GROUP A collection of objects providing basic start forward link configuration support. | 1.3.6.1.2.1.10.239.2.1.15 | current |
| dvbRcsFwdStatusGroup OBJECT-GROUP A collection of objects providing forward link status. | 1.3.6.1.2.1.10.239.2.1.16 | current |
| dvbRcsRtnConfigGroup OBJECT-GROUP A collection of objects providing basic return link configuration support. | 1.3.6.1.2.1.10.239.2.1.17 | current |
| dvbRcsRtnExtConfigGroup OBJECT-GROUP A collection of objects providing extended return link configuration support. | 1.3.6.1.2.1.10.239.2.1.18 | current |
| dvbRcsRtnStatusGroup OBJECT-GROUP A collection of objects allowing access to return link status. | 1.3.6.1.2.1.10.239.2.1.19 | current |
| dvbRcsRtnExtStatusGroup OBJECT-GROUP A collection of objects allowing access to extended return link status. | 1.3.6.1.2.1.10.239.2.1.20 | current |
| dvbRcsRcstOduListGroup OBJECT-GROUP A collection of objects supporting flexible selection of ODU devices. | 1.3.6.1.2.1.10.239.2.1.21 | current |
| dvbRcsRcstCompliance1 MODULE-COMPLIANCE The compliance statement for DVB-RCS terminals that are compliant with SatLabs System Recommendations. Compliance is linked to the support by the terminal of the options or features defined in the SatLabs System Recommendations. The supported options and features of a terminal are declared in objects dvbRcsSystemSatLabsOptionsDeclaration and dvbRcsSystemSatLabsFeaturesDeclaration respectively. | 1.3.6.1.2.1.10.239.2.2.1 | current |