MIBs Depot

DS1-MIB

Registered at
1.3.6.1.2.1.10.18
Last updated
2007-03-05 00:00
Organization
IETF AToM MIB Working Group
Revisions
2007-03-05 00:00, 2004-09-09 00:00, 1998-08-01 18:30, 1993-01-25 20:28
Namespace
standard
Source file
DS1-MIB
Digest
sha256:1b1623cb9cd9b538f6026873916fb5685b6df5afe89112fa782995adffe0c7d8

Description

The MIB module to describe DS1, J1, E1, DS2, and E2 interfaces objects. Copyright (c) The IETF Trust (2007). This version of this MIB module is part of RFC 4805; see the RFC itself for full legal notices.

Contact

WG charter: http://www.ietf.org/html.charters/atommib-charter.html Mailing Lists: General Discussion: atommib@research.telcordia.com To Subscribe: atommib-request@research.telcordia.com Editor: Orly Nicklass Postal: RAD Data Communications, Ltd. Ziv Tower, 24 Roul Walenberg Tel Aviv, Israel, 69719 Tel: +9723 765 9969 E-mail: orly_n@rad.com

Imports

FromSymbols
IF-MIBInterfaceIndex, ifIndex
PerfHist-TC-MIBPerfCurrentCount, PerfIntervalCount, PerfTotalCount
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso, transmission
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TimeStamp, TruthValue

Imported by

2 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

DS1-MIB
IANAifType-MIB
IF-MIB
PerfHist-TC-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
dsx1ConfigTable
OBJECT-TYPE
The DS1 Configuration table.
1.3.6.1.2.1.10.18.6not-accessiblecurrent
dsx1ConfigEntry
OBJECT-TYPE
An entry in the DS1 Configuration table.
1.3.6.1.2.1.10.18.6.1not-accessiblecurrent
dsx1LineIndex
OBJECT-TYPE
This object should be made equal to ifIndex. The next paragraph describes its previous usage. Making the object equal to ifIndex allows proper use of the ifStackTable and ds0/ds0bundle MIBs. Previously, this object was the identifier of a DS1 interface on a managed device. If there is an ifEntry that is directly associated with this and only this DS1 interface, it should have the same value as ifIndex. Otherwise, number the dsx1LineIndices with a unique identifier following the rules of choosing a number that is greater than ifNumber and numbering the inside interfaces (e.g., equipment side) with even numbers and outside interfaces (e.g., network side) with odd numbers.
1.3.6.1.2.1.10.18.6.1.1InterfaceIndexread-onlycurrent
dsx1IfIndex
OBJECT-TYPE
This value for this object is equal to the value of ifIndex from the Interfaces table (RFC 2863).
1.3.6.1.2.1.10.18.6.1.2InterfaceIndexread-onlydeprecated
dsx1TimeElapsed
OBJECT-TYPE
The number of seconds that have elapsed since the beginning of the near-end current error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
1.3.6.1.2.1.10.18.6.1.3INTEGER (0..899)read-onlycurrent
dsx1ValidIntervals
OBJECT-TYPE
The number of previous near-end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15-minute near-end intervals since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
1.3.6.1.2.1.10.18.6.1.4INTEGER (0..96)read-onlycurrent
dsx1LineType
OBJECT-TYPE
This variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonably carry, as well as the interpretation of the usage and error statistics. The values, in sequence, describe: TITLE: SPECIFICATION: dsx1ESF Extended SuperFrame DS1 (T1.107) dsx1D4 AT&T D4 format DS1 (T1.107) dsx1E1 ITU-T G.704, (Table 5A) dsx1E1-CRC ITU-T G.704, (Table 5B) dsxE1-MF G.704 (Table 5A) with TS16 multiframing enabled dsx1E1-CRC-MF G.704 (Table 5B) with TS16 multiframing enabled dsx1Unframed DS1 with No Framing dsx1E1Unframed E1 with No Framing (G.703) dsx1DS2M12 DS2 frame format (T1.107) dsx1E2 E2 frame format (G.704) dsx1E1Q50 TS16 bits 5,7,8 set to 101, [in all other cases it is set to 111.] (G.704, table 14) dsx1E1Q50CRC E1Q50 with CRC dsx1J1ESF J1 according to (JT-G704, JT-G706, and JT-I431) dsx1J1Unframed J1 with No Framing For clarification, the capacity for each E1 type is as listed below: dsx1E1Unframed - E1, no framing = 32 x 64k = 2048k dsx1E1 or dsx1E1CRC - E1, with framing, no signalling = 31 x 64k = 1984k dsx1E1MF or dsx1E1CRCMF - E1, with framing, signalling = 30 x 64k = 1920k
1.3.6.1.2.1.10.18.6.1.5INTEGER {other(1), dsx1ESF(2), dsx1D4(3), dsx1E1(4), dsx1E1CRC(5), dsx1E1MF(6), dsx1E1CRCMF(7), dsx1Unframed(8), dsx1E1Unframed(9), dsx1DS2M12(10), dsx1E2(11), dsx1E1Q50(12), dsx1E1Q50CRC(13), dsx1J1ESF(14), dsx1J1Unframed(16)}read-writecurrent
dsx1LineCoding
OBJECT-TYPE
This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. dsx1JBZS refers the Jammed Bit Zero Suppression, in which the AT&T specification of at least one pulse every 8-bit period is literally implemented by forcing a pulse in bit 8 of each channel. Thus, only 7 bits per channel, or 1.344 Mbps, are available for data. dsx1B8ZS refers to the use of a specified pattern of normal bits and bipolar violations that are used to replace a sequence of 8 zero bits. ANSI Clear Channels may use dsx1ZBTSI, or Zero Byte Time Slot Interchange. E1 links, with or without CRC, use dsx1HDB3 or dsx1AMI. dsx1AMI refers to a mode wherein no Zero Code Suppression is present and the line encoding does not solve the problem directly. In this application, the higher layer must provide data that meets or exceeds the pulse density requirements, such as inverting HDLC data. dsx1B6ZS refers to the user of a specified pattern of normal bits and bipolar violations that are used to replace a sequence of 6 zero bits. Used for DS2. For more information about line coding see [ANSI-T1.102]
1.3.6.1.2.1.10.18.6.1.6INTEGER {dsx1JBZS(1), dsx1B8ZS(2), dsx1HDB3(3), dsx1ZBTSI(4), dsx1AMI(5), other(6), dsx1B6ZS(7)}read-writecurrent
dsx1SendCode
OBJECT-TYPE
This variable indicates what type of code is being sent across the DS1 interface by the device. Setting this variable causes the interface to send the code requested. The values mean the following: dsx1SendNoCode sending looped or normal data dsx1SendLineCode sending a request for a line loopback dsx1SendPayloadCode sending a request for a payload loopback dsx1SendResetCode sending a loopback termination request dsx1SendQRS sending a Quasi-Random Signal (QRS) test pattern dsx1Send511Pattern sending a 511-bit fixed test pattern dsx1Send3in24Pattern sending a fixed test pattern of 3 bits set in 24 dsx1SendOtherTestPattern sending a test pattern other than those described by this object
1.3.6.1.2.1.10.18.6.1.7INTEGER {dsx1SendNoCode(1), dsx1SendLineCode(2), dsx1SendPayloadCode(3), dsx1SendResetCode(4), dsx1SendQRS(5), dsx1Send511Pattern(6), dsx1Send3in24Pattern(7), dsx1SendOtherTestPattern(8)}read-writecurrent
dsx1CircuitIdentifier
OBJECT-TYPE
This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting.
1.3.6.1.2.1.10.18.6.1.8DisplayString (SIZE(0..255))read-writecurrent
dsx1LoopbackConfig
OBJECT-TYPE
This variable represents the desired loopback configuration of the DS1 interface. Agents supporting read/write access should return inconsistentValue in response to a requested loopback state that the interface does not support. The values mean: dsx1NoLoop not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as its value. dsx1PayloadLoop the received signal at this interface is looped through the device. Typically, the received signal is looped back for retransmission after it has passed through the device's framing function. dsx1LineLoop the received signal at this interface does not go through the device (minimum penetration) but is looped back out. dsx1OtherLoop loopbacks that are not defined here. dsx1InwardLoop the transmitted signal at this interface is looped back and received by the same interface. What is transmitted onto the line is product dependent. dsx1DualLoop both dsx1LineLoop and dsx1InwardLoop will be active simultaneously.
1.3.6.1.2.1.10.18.6.1.9INTEGER {dsx1NoLoop(1), dsx1PayloadLoop(2), dsx1LineLoop(3), dsx1OtherLoop(4), dsx1InwardLoop(5), dsx1DualLoop(6)}read-writecurrent
dsx1LineStatus
OBJECT-TYPE
This variable indicates the line status of the interface. It contains loopback, failure, received alarm and transmitted alarms information. The dsx1LineStatus is a bitmap represented as a sum; therefore, it can represent multiple failures (alarms) and a LoopbackState simultaneously. dsx1NoAlarm must be set if and only if no other flag is set. If the dsx1loopbackState bit is set, the loopback in effect can be determined from the dsx1loopbackConfig object. The various bit positions are as follows: 1 dsx1NoAlarm No alarm present 2 dsx1RcvFarEndLOF Far end LOF (a.k.a. Yellow Alarm) 4 dsx1XmtFarEndLOF Near end sending LOF indication 8 dsx1RcvAIS Far end sending AIS 16 dsx1XmtAIS Near end sending AIS 32 dsx1LossOfFrame Near end LOF (a.k.a. Red Alarm) 64 dsx1LossOfSignal Near end Loss of Signal 128 dsx1LoopbackState Near end is looped 256 dsx1T16AIS E1 TS16 AIS 512 dsx1RcvFarEndLOMF Far end sending TS16 LOMF 1024 dsx1XmtFarEndLOMF Near end sending TS16 LOMF 2048 dsx1RcvTestCode Near end detects a test code 4096 dsx1OtherFailure Any line status not defined here 8192 dsx1UnavailSigState Near end in unavailable signal state 16384 dsx1NetEquipOOS Carrier equipment out of service 32768 dsx1RcvPayloadAIS DS2 payload AIS 65536 dsx1Ds2PerfThreshold DS2 performance threshold exceeded
1.3.6.1.2.1.10.18.6.1.10INTEGER (1..131071)read-onlycurrent
dsx1SignalMode
OBJECT-TYPE
'none' indicates that no bits are reserved for signaling on this channel. 'robbedBit' indicates that DS1 Robbed Bit Signaling is in use. 'bitOriented' indicates that E1 Channel Associated Signaling is in use. 'messageOriented' indicates that Common Channel Signaling is in use on either channel 16 of an E1 link or channel 24 of a DS1.
1.3.6.1.2.1.10.18.6.1.11INTEGER {none(1), robbedBit(2), bitOriented(3), messageOriented(4), other(5)}read-writecurrent
dsx1TransmitClockSource
OBJECT-TYPE
The source of transmit clock. 'loopTiming' indicates that the recovered receive clock is used as the transmit clock. 'localTiming' indicates that a local clock source is used or when an external clock is attached to the box containing the interface. 'throughTiming' indicates that recovered receive clock from another interface is used as the transmit clock. 'adaptive' indicates that the clock is recovered based on the data flow and not based on the physical layer
1.3.6.1.2.1.10.18.6.1.12INTEGER {loopTiming(1), localTiming(2), throughTiming(3), adaptive(4)}read-writecurrent
dsx1Fdl
OBJECT-TYPE
This bitmap describes the use of the facilities data link and is the sum of the capabilities. Set any bits that are appropriate: other(1), dsx1AnsiT1403(2), dsx1Att54016(4), dsx1FdlNone(8) 'other' indicates that a protocol other than one of the following is used. 'dsx1AnsiT1403' refers to the FDL exchange recommended by ANSI. 'dsx1Att54016' refers to ESF FDL exchanges. 'dsx1FdlNone' indicates that the device does not use the FDL.
1.3.6.1.2.1.10.18.6.1.13INTEGER (1..15)read-writecurrent
dsx1InvalidIntervals
OBJECT-TYPE
The number of intervals in the range from 0 to dsx1ValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals is not available (e.g., in proxy situations).
1.3.6.1.2.1.10.18.6.1.14INTEGER (0..96)read-onlycurrent
dsx1LineLength
OBJECT-TYPE
The length of the DS1 line in meters. This object provides information for line build-out circuitry. This object is only useful if the interface has configurable line build-out circuitry.
1.3.6.1.2.1.10.18.6.1.15INTEGER (0..64000)read-writecurrent
dsx1LineStatusLastChange
OBJECT-TYPE
The value of MIB II's sysUpTime object at the time this DS1 entered its current line status state. If the current state was entered prior to the last re-initialization of the proxy-agent, then this object contains a zero value.
1.3.6.1.2.1.10.18.6.1.16TimeStampread-onlycurrent
dsx1LineStatusChangeTrapEnable
OBJECT-TYPE
Indicates whether dsx1LineStatusChange traps should be generated for this interface.
1.3.6.1.2.1.10.18.6.1.17INTEGER {enabled(1), disabled(2)}read-writecurrent
dsx1LoopbackStatus
OBJECT-TYPE
This variable represents the current state of the loopback on the DS1 interface. It contains information about loopbacks established by a manager and remotely from the far end. The dsx1LoopbackStatus is a bitmap represented as a sum; therefore, it can represent multiple loopbacks simultaneously. The various bit positions are as follows: 1 dsx1NoLoopback 2 dsx1NearEndPayloadLoopback 4 dsx1NearEndLineLoopback 8 dsx1NearEndOtherLoopback 16 dsx1NearEndInwardLoopback 32 dsx1FarEndPayloadLoopback 64 dsx1FarEndLineLoopback
1.3.6.1.2.1.10.18.6.1.18INTEGER (1..127)read-onlycurrent
dsx1Ds1ChannelNumber
OBJECT-TYPE
This variable represents the channel number of the DS1/E1 on its parent DS2/E2 or DS3/E3. A value of 0 indicates that this DS1/E1 does not have a parent DS3/E3.
1.3.6.1.2.1.10.18.6.1.19INTEGER (0..28)read-onlycurrent
dsx1Channelization
OBJECT-TYPE
Indicates whether this DS1/E1 or DS2 is channelized or unchannelized. The value of enabledDs0(2) indicates that this is a DS1 channelized into DS0s. Setting this value will cause the creation, and resetting it to disabled(1) will cause the deletion of entries in the ifTable for the DS0s that are within the DS1. The value of enabledDs1(3) indicates that this is a DS2 channelized into DS1s. Setting this value will cause the creation, and resetting it to disabled(1) will cause the deletion of entries in the ifTable for the DS1s that are within the DS2.
1.3.6.1.2.1.10.18.6.1.20INTEGER {disabled(1), enabledDs0(2), enabledDs1(3)}read-writecurrent
dsx1LineMode
OBJECT-TYPE
This setting puts the T1 framer into either long-haul (CSU) mode or short-haul (DSU) mode.
1.3.6.1.2.1.10.18.6.1.21INTEGER {csu(1), dsu(2)}read-writecurrent
dsx1LineBuildOut
OBJECT-TYPE
Attenuation setting for T1 framer in long haul (CSU) mode. The optional values are -7.5dB, -15dB, -22.5dB, and 0dB.
1.3.6.1.2.1.10.18.6.1.22INTEGER {notApplicable(1), neg75dB(2), neg15dB(3), neg225dB(4), zerodB(5)}read-writecurrent
dsx1LineImpedance
OBJECT-TYPE
Nominal line impedance. For T1 and J1 lines, the value is typically balanced100ohms(3). For E1 lines, the value is typically unbalanced75ohms(2) and balanced120ohms(4). When this object does not apply, or when the appropriate value is not known, the value should be set to notApplicable(1).
1.3.6.1.2.1.10.18.6.1.23INTEGER {notApplicable(1), unbalanced75ohms(2), balanced100ohms(3), balanced120ohms(4)}read-writecurrent
dsx1CurrentTable
OBJECT-TYPE
The DS1 Current table contains various statistics being collected for the current 15-minute interval.
1.3.6.1.2.1.10.18.7not-accessiblecurrent
dsx1CurrentEntry
OBJECT-TYPE
An entry in the DS1 Current table.
1.3.6.1.2.1.10.18.7.1not-accessiblecurrent
dsx1CurrentIndex
OBJECT-TYPE
The index value that uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a dsx1LineIndex object instance.
1.3.6.1.2.1.10.18.7.1.1InterfaceIndexread-onlycurrent
dsx1CurrentESs
OBJECT-TYPE
The number of Errored Seconds.
1.3.6.1.2.1.10.18.7.1.2PerfCurrentCountread-onlycurrent
dsx1CurrentSESs
OBJECT-TYPE
The number of Severely Errored Seconds.
1.3.6.1.2.1.10.18.7.1.3PerfCurrentCountread-onlycurrent
dsx1CurrentSEFSs
OBJECT-TYPE
The number of Severely Errored Framing Seconds.
1.3.6.1.2.1.10.18.7.1.4PerfCurrentCountread-onlycurrent
dsx1CurrentUASs
OBJECT-TYPE
The number of Unavailable Seconds.
1.3.6.1.2.1.10.18.7.1.5PerfCurrentCountread-onlycurrent
dsx1CurrentCSSs
OBJECT-TYPE
The number of Controlled Slip Seconds.
1.3.6.1.2.1.10.18.7.1.6PerfCurrentCountread-onlycurrent
dsx1CurrentPCVs
OBJECT-TYPE
The number of Path Coding Violations.
1.3.6.1.2.1.10.18.7.1.7PerfCurrentCountread-onlycurrent
dsx1CurrentLESs
OBJECT-TYPE
The number of Line Errored Seconds.
1.3.6.1.2.1.10.18.7.1.8PerfCurrentCountread-onlycurrent
dsx1CurrentBESs
OBJECT-TYPE
The number of Bursty Errored Seconds.
1.3.6.1.2.1.10.18.7.1.9PerfCurrentCountread-onlycurrent
dsx1CurrentDMs
OBJECT-TYPE
The number of Degraded Minutes.
1.3.6.1.2.1.10.18.7.1.10PerfCurrentCountread-onlydeprecated
dsx1CurrentLCVs
OBJECT-TYPE
The number of Line Coding Violations (LCVs).
1.3.6.1.2.1.10.18.7.1.11PerfCurrentCountread-onlycurrent
dsx1IntervalTable
OBJECT-TYPE
The DS1 Interval table contains various statistics collected by each DS1 interface over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15-minute intervals. Each row in this table represents one such interval (identified by dsx1IntervalNumber) for one specific instance (identified by dsx1IntervalIndex).
1.3.6.1.2.1.10.18.8not-accessiblecurrent
dsx1IntervalEntry
OBJECT-TYPE
An entry in the DS1 Interval table.
1.3.6.1.2.1.10.18.8.1not-accessiblecurrent
dsx1IntervalIndex
OBJECT-TYPE
The index value that uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a dsx1LineIndex object instance.
1.3.6.1.2.1.10.18.8.1.1InterfaceIndexread-onlycurrent
dsx1IntervalNumber
OBJECT-TYPE
A number between 1 and 96, where 1 is the most recently completed 15-minute interval and 96 is the 15-minute interval completed 23 hours and 45 minutes prior to interval 1.
1.3.6.1.2.1.10.18.8.1.2INTEGER (1..96)read-onlycurrent
dsx1IntervalESs
OBJECT-TYPE
The number of Errored Seconds.
1.3.6.1.2.1.10.18.8.1.3PerfIntervalCountread-onlycurrent
dsx1IntervalSESs
OBJECT-TYPE
The number of Severely Errored Seconds.
1.3.6.1.2.1.10.18.8.1.4PerfIntervalCountread-onlycurrent
dsx1IntervalSEFSs
OBJECT-TYPE
The number of Severely Errored Framing Seconds.
1.3.6.1.2.1.10.18.8.1.5PerfIntervalCountread-onlycurrent
dsx1IntervalUASs
OBJECT-TYPE
The number of Unavailable Seconds. This object may decrease if the occurrence of unavailable seconds occurs across an interval boundary.
1.3.6.1.2.1.10.18.8.1.6PerfIntervalCountread-onlycurrent
dsx1IntervalCSSs
OBJECT-TYPE
The number of Controlled Slip Seconds.
1.3.6.1.2.1.10.18.8.1.7PerfIntervalCountread-onlycurrent
dsx1IntervalPCVs
OBJECT-TYPE
The number of Path Coding Violations.
1.3.6.1.2.1.10.18.8.1.8PerfIntervalCountread-onlycurrent
dsx1IntervalLESs
OBJECT-TYPE
The number of Line Errored Seconds.
1.3.6.1.2.1.10.18.8.1.9PerfIntervalCountread-onlycurrent
dsx1IntervalBESs
OBJECT-TYPE
The number of Bursty Errored Seconds.
1.3.6.1.2.1.10.18.8.1.10PerfIntervalCountread-onlycurrent
dsx1IntervalDMs
OBJECT-TYPE
The number of Degraded Minutes.
1.3.6.1.2.1.10.18.8.1.11PerfIntervalCountread-onlydeprecated
dsx1IntervalLCVs
OBJECT-TYPE
The number of Line Coding Violations.
1.3.6.1.2.1.10.18.8.1.12PerfIntervalCountread-onlycurrent
dsx1IntervalValidData
OBJECT-TYPE
This variable indicates whether the data for this interval is valid.
1.3.6.1.2.1.10.18.8.1.13TruthValueread-onlycurrent
dsx1TotalTable
OBJECT-TYPE
The DS1 Total table contains the cumulative sum of the various statistics for the 24-hour period preceding the current interval.
1.3.6.1.2.1.10.18.9not-accessiblecurrent
dsx1TotalEntry
OBJECT-TYPE
An entry in the DS1 Total table.
1.3.6.1.2.1.10.18.9.1not-accessiblecurrent
dsx1TotalIndex
OBJECT-TYPE
The index value that uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a dsx1LineIndex object instance.
1.3.6.1.2.1.10.18.9.1.1InterfaceIndexread-onlycurrent
dsx1TotalESs
OBJECT-TYPE
The number of Errored Seconds encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0.
1.3.6.1.2.1.10.18.9.1.2PerfTotalCountread-onlycurrent
dsx1TotalSESs
OBJECT-TYPE
The number of Severely Errored Seconds encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0.
1.3.6.1.2.1.10.18.9.1.3PerfTotalCountread-onlycurrent
dsx1TotalSEFSs
OBJECT-TYPE
The number of Severely Errored Framing Seconds encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0.
1.3.6.1.2.1.10.18.9.1.4PerfTotalCountread-onlycurrent
dsx1TotalUASs
OBJECT-TYPE
The number of Unavailable Seconds encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0.
1.3.6.1.2.1.10.18.9.1.5PerfTotalCountread-onlycurrent
dsx1TotalCSSs
OBJECT-TYPE
The number of Controlled Slip Seconds encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0.
1.3.6.1.2.1.10.18.9.1.6PerfTotalCountread-onlycurrent
dsx1TotalPCVs
OBJECT-TYPE
The number of Path Coding Violations encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0.
1.3.6.1.2.1.10.18.9.1.7PerfTotalCountread-onlycurrent
dsx1TotalLESs
OBJECT-TYPE
The number of Line Errored Seconds encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0.
1.3.6.1.2.1.10.18.9.1.8PerfTotalCountread-onlycurrent
dsx1TotalBESs
OBJECT-TYPE
The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0.
1.3.6.1.2.1.10.18.9.1.9PerfTotalCountread-onlycurrent
dsx1TotalDMs
OBJECT-TYPE
The number of Degraded Minutes (DMs) encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0.
1.3.6.1.2.1.10.18.9.1.10PerfTotalCountread-onlydeprecated
dsx1TotalLCVs
OBJECT-TYPE
The number of Line Coding Violations (LCVs) encountered by a DS1 interface in the current 15-minute interval. Invalid 15-minute intervals count as 0.
1.3.6.1.2.1.10.18.9.1.11PerfTotalCountread-onlycurrent
dsx1FarEndCurrentTable
OBJECT-TYPE
The DS1 Far End Current table contains various statistics being collected for the current 15-minute interval. The statistics are collected from the far-end messages on the Facilities Data Link. The definitions are the same as described for the near-end information.
1.3.6.1.2.1.10.18.10not-accessiblecurrent
dsx1FarEndCurrentEntry
OBJECT-TYPE
An entry in the DS1 Far End Current table.
1.3.6.1.2.1.10.18.10.1not-accessiblecurrent
dsx1FarEndCurrentIndex
OBJECT-TYPE
The index value that uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is identical to the interface identified by the same value of dsx1LineIndex.
1.3.6.1.2.1.10.18.10.1.1InterfaceIndexread-onlycurrent
dsx1FarEndTimeElapsed
OBJECT-TYPE
The number of seconds that have elapsed since the beginning of the far-end current error-measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
1.3.6.1.2.1.10.18.10.1.2INTEGER (0..899)read-onlycurrent
dsx1FarEndValidIntervals
OBJECT-TYPE
The number of previous far-end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15-minute far-end intervals since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
1.3.6.1.2.1.10.18.10.1.3INTEGER (0..96)read-onlycurrent
dsx1FarEndCurrentESs
OBJECT-TYPE
The number of Far End Errored Seconds.
1.3.6.1.2.1.10.18.10.1.4PerfCurrentCountread-onlycurrent
dsx1FarEndCurrentSESs
OBJECT-TYPE
The number of Far End Severely Errored Seconds.
1.3.6.1.2.1.10.18.10.1.5PerfCurrentCountread-onlycurrent
dsx1FarEndCurrentSEFSs
OBJECT-TYPE
The number of Far End Severely Errored Framing Seconds.
1.3.6.1.2.1.10.18.10.1.6PerfCurrentCountread-onlycurrent
dsx1FarEndCurrentUASs
OBJECT-TYPE
The number of Unavailable Seconds.
1.3.6.1.2.1.10.18.10.1.7PerfCurrentCountread-onlycurrent
dsx1FarEndCurrentCSSs
OBJECT-TYPE
The number of Far End Controlled Slip Seconds.
1.3.6.1.2.1.10.18.10.1.8PerfCurrentCountread-onlycurrent
dsx1FarEndCurrentLESs
OBJECT-TYPE
The number of Far End Line Errored Seconds.
1.3.6.1.2.1.10.18.10.1.9PerfCurrentCountread-onlycurrent
dsx1FarEndCurrentPCVs
OBJECT-TYPE
The number of Far End Path Coding Violations.
1.3.6.1.2.1.10.18.10.1.10PerfCurrentCountread-onlycurrent
dsx1FarEndCurrentBESs
OBJECT-TYPE
The number of Far End Bursty Errored Seconds.
1.3.6.1.2.1.10.18.10.1.11PerfCurrentCountread-onlycurrent
dsx1FarEndCurrentDMs
OBJECT-TYPE
The number of Far End Degraded Minutes.
1.3.6.1.2.1.10.18.10.1.12PerfCurrentCountread-onlydeprecated
dsx1FarEndInvalidIntervals
OBJECT-TYPE
The number of intervals in the range from 0 to dsx1FarEndValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals is not available (e.g., in proxy situations).
1.3.6.1.2.1.10.18.10.1.13INTEGER (0..96)read-onlycurrent
dsx1FarEndIntervalTable
OBJECT-TYPE
The DS1 Far End Interval table contains various statistics collected by each DS1 interface over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15-minute intervals. Each row in this table represents one such interval (identified by dsx1FarEndIntervalNumber) for one specific instance (identified by dsx1FarEndIntervalIndex).
1.3.6.1.2.1.10.18.11not-accessiblecurrent
dsx1FarEndIntervalEntry
OBJECT-TYPE
An entry in the DS1 Far End Interval table.
1.3.6.1.2.1.10.18.11.1not-accessiblecurrent
dsx1FarEndIntervalIndex
OBJECT-TYPE
The index value that uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is identical to the interface identified by the same value of dsx1LineIndex.
1.3.6.1.2.1.10.18.11.1.1InterfaceIndexread-onlycurrent
dsx1FarEndIntervalNumber
OBJECT-TYPE
A number between 1 and 96, where 1 is the most recently completed 15-minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1.
1.3.6.1.2.1.10.18.11.1.2INTEGER (1..96)read-onlycurrent
dsx1FarEndIntervalESs
OBJECT-TYPE
The number of Far End Errored Seconds.
1.3.6.1.2.1.10.18.11.1.3PerfIntervalCountread-onlycurrent
dsx1FarEndIntervalSESs
OBJECT-TYPE
The number of Far End Severely Errored Seconds.
1.3.6.1.2.1.10.18.11.1.4PerfIntervalCountread-onlycurrent
dsx1FarEndIntervalSEFSs
OBJECT-TYPE
The number of Far End Severely Errored Framing Seconds.
1.3.6.1.2.1.10.18.11.1.5PerfIntervalCountread-onlycurrent
dsx1FarEndIntervalUASs
OBJECT-TYPE
The number of Unavailable Seconds.
1.3.6.1.2.1.10.18.11.1.6PerfIntervalCountread-onlycurrent
dsx1FarEndIntervalCSSs
OBJECT-TYPE
The number of Far End Controlled Slip Seconds.
1.3.6.1.2.1.10.18.11.1.7PerfIntervalCountread-onlycurrent
dsx1FarEndIntervalLESs
OBJECT-TYPE
The number of Far End Line Errored Seconds.
1.3.6.1.2.1.10.18.11.1.8PerfIntervalCountread-onlycurrent
dsx1FarEndIntervalPCVs
OBJECT-TYPE
The number of Far End Path Coding Violations.
1.3.6.1.2.1.10.18.11.1.9PerfIntervalCountread-onlycurrent
dsx1FarEndIntervalBESs
OBJECT-TYPE
The number of Far End Bursty Errored Seconds.
1.3.6.1.2.1.10.18.11.1.10PerfIntervalCountread-onlycurrent
dsx1FarEndIntervalDMs
OBJECT-TYPE
The number of Far End Degraded Minutes.
1.3.6.1.2.1.10.18.11.1.11PerfIntervalCountread-onlydeprecated
dsx1FarEndIntervalValidData
OBJECT-TYPE
This variable indicates if the data for this interval is valid.
1.3.6.1.2.1.10.18.11.1.12TruthValueread-onlycurrent
dsx1FarEndTotalTable
OBJECT-TYPE
The DS1 Far End Total table contains the cumulative sum of the various statistics for the 24-hour period preceding the current interval.
1.3.6.1.2.1.10.18.12not-accessiblecurrent
dsx1FarEndTotalEntry
OBJECT-TYPE
An entry in the DS1 Far End Total table.
1.3.6.1.2.1.10.18.12.1not-accessiblecurrent
dsx1FarEndTotalIndex
OBJECT-TYPE
The index value that uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is identical to the interface identified by the same value of dsx1LineIndex.
1.3.6.1.2.1.10.18.12.1.1InterfaceIndexread-onlycurrent
dsx1FarEndTotalESs
OBJECT-TYPE
The number of Far End Errored Seconds encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0.
1.3.6.1.2.1.10.18.12.1.2PerfTotalCountread-onlycurrent
dsx1FarEndTotalSESs
OBJECT-TYPE
The number of Far End Severely Errored Seconds encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0.
1.3.6.1.2.1.10.18.12.1.3PerfTotalCountread-onlycurrent
dsx1FarEndTotalSEFSs
OBJECT-TYPE
The number of Far End Severely Errored Framing Seconds encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0.
1.3.6.1.2.1.10.18.12.1.4PerfTotalCountread-onlycurrent
dsx1FarEndTotalUASs
OBJECT-TYPE
The number of Unavailable Seconds encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0.
1.3.6.1.2.1.10.18.12.1.5PerfTotalCountread-onlycurrent
dsx1FarEndTotalCSSs
OBJECT-TYPE
The number of Far End Controlled Slip Seconds encountered by a DS1 interface in the previous 24-hour interval. Invalid 15 minute intervals count as 0.
1.3.6.1.2.1.10.18.12.1.6PerfTotalCountread-onlycurrent
dsx1FarEndTotalLESs
OBJECT-TYPE
The number of Far End Line Errored Seconds encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0.
1.3.6.1.2.1.10.18.12.1.7PerfTotalCountread-onlycurrent
dsx1FarEndTotalPCVs
OBJECT-TYPE
The number of Far End Path Coding Violations reported via the far end block error count encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0.
1.3.6.1.2.1.10.18.12.1.8PerfTotalCountread-onlycurrent
dsx1FarEndTotalBESs
OBJECT-TYPE
The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0.
1.3.6.1.2.1.10.18.12.1.9PerfTotalCountread-onlycurrent
dsx1FarEndTotalDMs
OBJECT-TYPE
The number of Degraded Minutes (DMs) encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0.
1.3.6.1.2.1.10.18.12.1.10PerfTotalCountread-onlydeprecated
dsx1FracTable
OBJECT-TYPE
This table is deprecated in favor of using ifStackTable. The table was mandatory for systems dividing a DS1 into channels containing different data streams that are of local interest. Systems that are indifferent to data content, such as CSUs, need not implement it. The DS1 Fractional table identifies which DS1 channels associated with a CSU are being used to support a logical interface, i.e., an entry in the interfaces table from the Internet-standard MIB. For example, consider an application managing a North American ISDN Primary Rate link whose division is a 384-kbit/s H1 _B_ Channel for video, a second H1 for data to a primary routing peer, and 12 64-kbit/s H0 _B_ Channels. Consider that some subset of the H0 channels is used for voice and the remainder are available for dynamic data calls. We count a total of 14 interfaces multiplexed onto the DS1 interface. Six DS1 channels (for the sake of the example, channels 1..6) are used for video, six more (7..11 and 13) are used for data, and the remaining 12 are in channels 12 and 14..24. Let us further imagine that ifIndex 2 is of type DS1 and refers to the DS1 interface and that the interfaces layered onto it are numbered 3..16. We might describe the allocation of channels, in the dsx1FracTable, as follows: dsx1FracIfIndex.2. 1 = 3 dsx1FracIfIndex.2.13 = 4 dsx1FracIfIndex.2. 2 = 3 dsx1FracIfIndex.2.14 = 6 dsx1FracIfIndex.2. 3 = 3 dsx1FracIfIndex.2.15 = 7 dsx1FracIfIndex.2. 4 = 3 dsx1FracIfIndex.2.16 = 8 dsx1FracIfIndex.2. 5 = 3 dsx1FracIfIndex.2.17 = 9 dsx1FracIfIndex.2. 6 = 3 dsx1FracIfIndex.2.18 = 10 dsx1FracIfIndex.2. 7 = 4 dsx1FracIfIndex.2.19 = 11 dsx1FracIfIndex.2. 8 = 4 dsx1FracIfIndex.2.20 = 12 dsx1FracIfIndex.2. 9 = 4 dsx1FracIfIndex.2.21 = 13 dsx1FracIfIndex.2.10 = 4 dsx1FracIfIndex.2.22 = 14 dsx1FracIfIndex.2.11 = 4 dsx1FracIfIndex.2.23 = 15 dsx1FracIfIndex.2.12 = 5 dsx1FracIfIndex.2.24 = 16 For North American (DS1) interfaces, there are 24 legal channels, numbered 1 through 24. For G.704 interfaces, there are 31 legal channels, numbered 1 through 31. The channels (1..31) correspond directly to the equivalently numbered time-slots.
1.3.6.1.2.1.10.18.13not-accessibledeprecated
dsx1FracEntry
OBJECT-TYPE
An entry in the DS1 Fractional table.
1.3.6.1.2.1.10.18.13.1not-accessibledeprecated
dsx1FracIndex
OBJECT-TYPE
The index value that uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a dsx1LineIndex object instance.
1.3.6.1.2.1.10.18.13.1.1INTEGER (1..2147483647)read-onlydeprecated
dsx1FracNumber
OBJECT-TYPE
The channel number for this entry.
1.3.6.1.2.1.10.18.13.1.2INTEGER (1..31)read-onlydeprecated
dsx1FracIfIndex
OBJECT-TYPE
An index value that uniquely identifies an interface. The interface identified by a particular value of this index is the same interface as identified by the same value as an ifIndex object instance. If no interface is currently using a channel, the value should be zero. If a single interface occupies more than one time-slot, that ifIndex value will be found in multiple time-slots.
1.3.6.1.2.1.10.18.13.1.3INTEGER (0..2147483647)read-writedeprecated
ds1Conformance
OBJECT-IDENTITY
1.3.6.1.2.1.10.18.14
ds1Groups
OBJECT-IDENTITY
1.3.6.1.2.1.10.18.14.1
ds1Compliances
OBJECT-IDENTITY
1.3.6.1.2.1.10.18.14.2
ds1Traps
OBJECT-IDENTITY
1.3.6.1.2.1.10.18.15
dsx1ChanMappingTable
OBJECT-TYPE
The DS1 Channel Mapping table. This table maps a DS1 channel number on a particular DS3 into an ifIndex. In the presence of DS2s, this table can be used to map a DS2 channel number on a DS3 into an ifIndex, or used to map a DS1 channel number on a DS2 into an ifIndex.
1.3.6.1.2.1.10.18.16not-accessiblecurrent
dsx1ChanMappingEntry
OBJECT-TYPE
An entry in the DS1 Channel Mapping table. There is an entry in this table corresponding to each DS1 ifEntry within any interface that is channelized to the individual DS1 ifEntry level. This table is intended to facilitate mapping from channelized interface / channel number to DS1 ifEntry (e.g., mapping (DS3 ifIndex, DS1 channel number) -> ifIndex). While this table provides information that can also be found in the ifStackTable and dsx1ConfigTable, it provides this same information with a single table lookup, rather than by walking the ifStackTable to find the various constituent DS1 ifTable entries, and testing various dsx1ConfigTable entries to check for the entry with the applicable DS1 channel number.
1.3.6.1.2.1.10.18.16.1not-accessiblecurrent
dsx1ChanMappedIfIndex
OBJECT-TYPE
This object indicates the ifIndex value assigned by the agent for the individual DS1 ifEntry that corresponds to the given DS1 channel number (specified by the INDEX element dsx1Ds1ChannelNumber) of the given channelized interface (specified by INDEX element ifIndex).
1.3.6.1.2.1.10.18.16.1.1InterfaceIndexread-onlycurrent

Notifications

NameOIDStatus
dsx1LineStatusChange
NOTIFICATION-TYPE
A dsx1LineStatusChange trap is sent when the value of an instance dsx1LineStatus changes. It can be utilized by an Network Management Station (NMS) to trigger polls. When the line status change results from a higher-level line status change (i.e., DS3), then no traps for the DS1 are sent.
1.3.6.1.2.1.10.18.15.0.1current

Conformance

NameOIDStatus
ds1NearEndConfigGroup
OBJECT-GROUP
A collection of objects providing configuration information applicable to all DS1 interfaces.
1.3.6.1.2.1.10.18.14.1.1deprecated
ds1NearEndStatisticsGroup
OBJECT-GROUP
A collection of objects providing statistics information applicable to all DS1 interfaces.
1.3.6.1.2.1.10.18.14.1.2deprecated
ds1FarEndGroup
OBJECT-GROUP
A collection of objects providing remote configuration and statistics information.
1.3.6.1.2.1.10.18.14.1.3deprecated
ds1DeprecatedGroup
OBJECT-GROUP
A collection of obsolete objects that may be implemented for backwards compatibility.
1.3.6.1.2.1.10.18.14.1.4deprecated
ds1NearEndOptionalConfigGroup
OBJECT-GROUP
A collection of objects that may be implemented on DS1 and DS2 interfaces.
1.3.6.1.2.1.10.18.14.1.5current
ds1DS2Group
OBJECT-GROUP
A collection of objects providing information about DS2 (6,312 kbps) and E2 (8,448 kbps) systems.
1.3.6.1.2.1.10.18.14.1.6current
ds1TransStatsGroup
OBJECT-GROUP
A collection of objects that are the statistics that can be collected from a DS1 interface that is running transparent or unframed lineType. Statistics not in this list should return noSuchInstance.
1.3.6.1.2.1.10.18.14.1.7current
ds1NearEndOptionalTrapGroup
NOTIFICATION-GROUP
A collection of notifications that may be implemented on DS1 and DS2 interfaces.
1.3.6.1.2.1.10.18.14.1.8current
ds1ChanMappingGroup
OBJECT-GROUP
A collection of objects that give a mapping of DS3 Channel (dsx1Ds1ChannelNumber) to ifIndex.
1.3.6.1.2.1.10.18.14.1.9current
ds1NearEndConfigurationGroup
OBJECT-GROUP
A collection of objects providing configuration information applicable to all DS1 interfaces.
1.3.6.1.2.1.10.18.14.1.10deprecated
ds1NearEndCfgGroup
OBJECT-GROUP
A collection of objects providing configuration information applicable to all DS1 interfaces.
1.3.6.1.2.1.10.18.14.1.11current
ds1NearEndStatGroup
OBJECT-GROUP
A collection of objects providing statistics information applicable to all DS1 interfaces.
1.3.6.1.2.1.10.18.14.1.12current
ds1FarEndNGroup
OBJECT-GROUP
A collection of objects providing remote configuration and statistics information.
1.3.6.1.2.1.10.18.14.1.13current
ds1Compliance
MODULE-COMPLIANCE
The compliance statement for T1 and E1 interfaces.
1.3.6.1.2.1.10.18.14.2.1deprecated
ds1MibT1PriCompliance
MODULE-COMPLIANCE
Compliance statement for using this MIB for ISDN Primary Rate interfaces on T1 lines.
1.3.6.1.2.1.10.18.14.2.2deprecated
ds1MibE1PriCompliance
MODULE-COMPLIANCE
Compliance statement for using this MIB for ISDN Primary Rate interfaces on E1 lines.
1.3.6.1.2.1.10.18.14.2.3deprecated
ds1Ds2Compliance
MODULE-COMPLIANCE
Compliance statement for using this MIB for DS2 interfaces.
1.3.6.1.2.1.10.18.14.2.4current
ds1NCompliance
MODULE-COMPLIANCE
The compliance statement for T1 and E1 interfaces.
1.3.6.1.2.1.10.18.14.2.5deprecated
ds1MibT1PriNCompliance
MODULE-COMPLIANCE
Compliance statement for using this MIB for ISDN Primary Rate interfaces on T1 lines.
1.3.6.1.2.1.10.18.14.2.6deprecated
ds1MibE1PriNCompliance
MODULE-COMPLIANCE
Compliance statement for using this MIB for ISDN Primary Rate interfaces on E1 lines.
1.3.6.1.2.1.10.18.14.2.7deprecated
ds1J1Compliance
MODULE-COMPLIANCE
The compliance statement for T1, J1, and E1 interfaces.
1.3.6.1.2.1.10.18.14.2.8current
ds1NMibT1PriNCompliance
MODULE-COMPLIANCE
Compliance statement for using this MIB for ISDN Primary Rate interfaces on T1 lines.
1.3.6.1.2.1.10.18.14.2.9current
ds1NMibE1PriNCompliance
MODULE-COMPLIANCE
Compliance statement for using this MIB for ISDN Primary Rate interfaces on E1 lines.
1.3.6.1.2.1.10.18.14.2.10current