DS0BUNDLE-MIB
- Registered at
- 1.3.6.1.2.1.10.82
- Last updated
- 1998-07-16 16:30
- Organization
- IETF Trunk MIB Working Group
- Revisions
- 1998-05-24 20:10
- Namespace
- standard
- Source file
DS0BUNDLE-MIB- Digest
sha256:efb8733a4d1d33b29f7acad8b5c2e04f6114a137cf7d9cffa73ffaf82fb3d43e
Description
The MIB module to describe DS0 Bundle interfaces objects.
Contact
David Fowler Postal: Newbridge Networks Corporation 600 March Road Kanata, Ontario, Canada K2K 2E6 Tel: +1 613 591 3600 Fax: +1 613 599 3619 E-mail: davef@newbridge.com
Imports
| From | Symbols |
|---|---|
| IF-MIB | InterfaceIndex, ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso, transmission |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TestAndIncr |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
DS0BUNDLE-MIB IANAifType-MIB IF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| dsx0BondingTable OBJECT-TYPE The DS0 Bonding table. | 1.3.6.1.2.1.10.82.1 | not-accessible | current | |
| dsx0BondingEntry OBJECT-TYPE An entry in the DS0 Bonding table. There is a row in this table for each DS0Bundle interface. | 1.3.6.1.2.1.10.82.1.1 | not-accessible | current | |
| dsx0BondMode OBJECT-TYPE This object indicates which BONDing mode is used, if any, for a ds0Bundle. Mode0 provides parameter and number exchange with no synchronization. Mode 1 provides parameter and number exchange. Mode 1 also provides synchronization during initialization but does not include inband monitoring. Mode 2 provides all of the above plus inband monitoring. Mode 2 also steals 1/64th of the bandwidth of each channel (thus not supporting n x 56/64 kbit/s data channels for most values of n). Mode 3 provides all of the above, but also provides n x 56/64 kbit/s data channels. Most common implementations of Mode 3 add an extra channel to support the inband monitoring overhead. ModeNone should be used when the interface is not performing bandwidth-on-demand. | 1.3.6.1.2.1.10.82.1.1.1 | INTEGER {none(1), other(2), mode0(3), mode1(4), mode2(5), mode3(6)} | read-create | current |
| dsx0BondStatus OBJECT-TYPE This object indicates the current status of the bonding call using this ds0Bundle. idle(1) should be used when the bonding mode is set to none(1). | 1.3.6.1.2.1.10.82.1.1.2 | INTEGER {idle(1), callSetup(2), dataTransfer(3)} | read-only | current |
| dsx0BondRowStatus OBJECT-TYPE This object is used to create new rows in this table, modify existing rows, and to delete existing rows. | 1.3.6.1.2.1.10.82.1.1.3 | RowStatus | read-create | current |
| dsx0BundleNextIndex OBJECT-TYPE This object is used to assist the manager in selecting a value for dsx0BundleIndex. Because this object is of syntax TestAndIncr (see the SNMPv2-TC document, RFC 1903) it can also be used to avoid race conditions with multiple managers trying to create rows in the table. If the result of the SET for dsx0BundleNextIndex is not success, this means the value has been changed from index (i.e. another manager used the value), so a new value is required. The algorithm is: done = false while done == false index = GET (dsx0BundleNextIndex.0) SET (dsx0BundleNextIndex.0=index) if (set failed) done = false else SET(dsx0BundleRowStatus.index=createAndGo) if (set failed) done = false else done = true other error handling | 1.3.6.1.2.1.10.82.2 | TestAndIncr | read-write | current |
| dsx0BundleTable OBJECT-TYPE There is an row in this table for each ds0Bundle in the system. This table can be used to (indirectly) create rows in the ifTable with ifType = 'ds0Bundle(82)'. | 1.3.6.1.2.1.10.82.3 | not-accessible | current | |
| dsx0BundleEntry OBJECT-TYPE There is a row in entry in this table for each ds0Bundle interface. | 1.3.6.1.2.1.10.82.3.1 | not-accessible | current | |
| dsx0BundleIndex OBJECT-TYPE A unique identifier for a ds0Bundle. This is not the same value as ifIndex. This table is not indexed by ifIndex because the manager has to choose the index in a createable row and the agent must be allowed to select ifIndex values. | 1.3.6.1.2.1.10.82.3.1.1 | INTEGER (0..2147483647) | not-accessible | current |
| dsx0BundleIfIndex OBJECT-TYPE The ifIndex value the agent selected for the (new) ds0Bundle interface. | 1.3.6.1.2.1.10.82.3.1.2 | InterfaceIndex | read-only | current |
| dsx0BundleCircuitIdentifier OBJECT-TYPE This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting. | 1.3.6.1.2.1.10.82.3.1.3 | DisplayString (SIZE(0..255)) | read-create | current |
| dsx0BundleRowStatus OBJECT-TYPE This object is used to create and delete rows in this table. | 1.3.6.1.2.1.10.82.3.1.4 | RowStatus | read-create | current |
| ds0BundleConformance OBJECT-IDENTITY | 1.3.6.1.2.1.10.82.4 | |||
| ds0BundleGroups OBJECT-IDENTITY | 1.3.6.1.2.1.10.82.4.1 | |||
| ds0BundleCompliances OBJECT-IDENTITY | 1.3.6.1.2.1.10.82.4.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| ds0BondingGroup OBJECT-GROUP A collection of objects providing configuration information applicable to all DS0 interfaces. | 1.3.6.1.2.1.10.82.4.1.1 | current |
| ds0BundleConfigGroup OBJECT-GROUP A collection of objects providing the ability to create a new ds0Bundle in the ifTable as well as configuration information about the ds0Bundle. | 1.3.6.1.2.1.10.82.4.1.2 | current |
| ds0BundleCompliance MODULE-COMPLIANCE The compliance statement for DS0Bundle interfaces. | 1.3.6.1.2.1.10.82.4.2.1 | current |