MIBs Depot

DRAGONWAVE-HCP-MIB

Registered at
1.3.6.1.4.1.7262.2.5
Last updated
2014-03-28 10:23
Organization
Dragonwave Inc.
Revisions
2013-01-17 11:09, 2014-03-28 10:28, 2014-11-24 17:12, 2015-12-10 17:12
Namespace
dragonwave
Source file
DRAGONWAVE-HCP-MIB
Digest
sha256:f8e895c13513ebce8704a675c5841caaefbedcf802fd1c12b21f7bb273fcb555

Description

This specifies the contact information and the revision tracking information for the MIB module version.

Contact

http://www.dragonwaveinc.com 600-411 Legget Drive Ottawa, Ontario Canada, K2K 3C9 Tel : 613-599-9991 Fax: 613-599-4265 Support: 613-271-7010

Imports

FromSymbols
HORIZON-EQUIPMENT-LOG-MIBhorizonEquipmentOutTrapsCounter
HORIZON-MIBhorizon
IF-MIBifIndex
INET-ADDRESS-MIBInetAddress, InetAddressPrefixLength, InetAddressType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

DRAGONWAVE-HCP-MIB
HORIZON-EQUIPMENT-LOG-MIB
HORIZON-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
horizonCompactPlus
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5
hzCpSystem
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.1
hzCpSysGeneral
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.1.1
hzCpResetSystem
OBJECT-TYPE
Writing '1' to this object resets the system.
1.3.6.1.4.1.7262.2.5.1.1.1INTEGER {reset(1)}read-writecurrent
hzCpSaveMIB
OBJECT-TYPE
Writing '1' or 'save' to this object save all MIB values.
1.3.6.1.4.1.7262.2.5.1.1.2INTEGER {save(1)}read-writecurrent
hzCpOperStatus
OBJECT-TYPE
The current operational state of the system. Testing indicates that no operational packets can be passed.
1.3.6.1.4.1.7262.2.5.1.1.3INTEGER {up(1), down(2), testing(3)}read-onlycurrent
hzCpSysSpeed
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.1.2
hzCpSystemCurrentSpeed
OBJECT-TYPE
Changes the working speed of the system.
1.3.6.1.4.1.7262.2.5.1.2.1Integer32 (0..1000)read-writecurrent
hzCpSystemLicensedSpeed
OBJECT-TYPE
Indicates the maximum speed that this system can operate at. Due to backwards compatibility issue, 0 value should be treated as 0 Mbps.
1.3.6.1.4.1.7262.2.5.1.2.2Integer32 (0..1000)read-onlycurrent
hzCpSysUpgradeSpeed
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.1.2.3
hzCpLicensedSpeedUpgradeSpeedAndKey
OBJECT-TYPE
Enter your key here along with the maximum speed for that key to upgrade the system speed. Format: [speed] [key] Example: 800 abc123
1.3.6.1.4.1.7262.2.5.1.2.3.1DisplayStringread-writecurrent
hzCpLicensedSpeedCount
OBJECT-TYPE
This object indicates the number of times the licensed speed has been changed successfully. It is used when generating new license keys for your system.
1.3.6.1.4.1.7262.2.5.1.2.3.2Integer32read-onlycurrent
hzCpSysDowngradeSpeed
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.1.2.4
hzCpLicensedSpeedDowngradeSpeed
OBJECT-TYPE
Reduce your licensed speed by entering a speed to this object and take note of the generated key in hzCpLicensedSpeedConfirmationKey. Format: [speed] Example: 200
1.3.6.1.4.1.7262.2.5.1.2.4.1Integer32read-writecurrent
hzCpLicensedSpeedCountUsedForKey
OBJECT-TYPE
This object indicates the number of times the licensed speed has been changed successfully. It is used when generating new license keys for your system.
1.3.6.1.4.1.7262.2.5.1.2.4.2Integer32read-onlycurrent
hzCpLicensedSpeedConfirmationKey
OBJECT-TYPE
This read-only object will show a 'key' after successfully downgrading the license speed.
1.3.6.1.4.1.7262.2.5.1.2.4.3DisplayStringread-onlycurrent
hzCpSysDowngradeSpeedDecrement
OBJECT-TYPE
This object indicates the difference for the dropped speed.
1.3.6.1.4.1.7262.2.5.1.2.4.4Integer32read-onlycurrent
hzCpInventory
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.1.3
hzCpHwInventory
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.1.3.1
hzCpFrequencyFilePartNumber
OBJECT-TYPE
A textual string containing Part Number of the Frequency File
1.3.6.1.4.1.7262.2.5.1.3.1.1DisplayStringread-onlycurrent
hzCpUnitSerialNo
OBJECT-TYPE
A textual string containing Serial Number of the Unit.
1.3.6.1.4.1.7262.2.5.1.3.1.2DisplayStringread-onlycurrent
hzCpUnitAssemblyNo
OBJECT-TYPE
A textual string containing the Assembly Number of the Unit.
1.3.6.1.4.1.7262.2.5.1.3.1.3DisplayStringread-onlycurrent
hzCpModemSerialNo
OBJECT-TYPE
A textual string containing Serial no of the Modem.
1.3.6.1.4.1.7262.2.5.1.3.1.4DisplayStringread-onlycurrent
hzCpModemAssemblyNo
OBJECT-TYPE
A textual string containing assembly no of the Modem.
1.3.6.1.4.1.7262.2.5.1.3.1.5DisplayStringread-onlycurrent
hzCpPsuSerialNo
OBJECT-TYPE
A textual string containing Serial no of the PSU.
1.3.6.1.4.1.7262.2.5.1.3.1.6DisplayStringread-onlycurrent
hzCpPsuAssemblyNo
OBJECT-TYPE
A textual string containing assembly no of the PSU.
1.3.6.1.4.1.7262.2.5.1.3.1.7DisplayStringread-onlycurrent
hzCpRfSerialNo
OBJECT-TYPE
A textual string containing Serial no of the RF.
1.3.6.1.4.1.7262.2.5.1.3.1.8DisplayStringread-onlycurrent
hzCpRfAssemblyNo
OBJECT-TYPE
A textual string containing assembly no of the RF.
1.3.6.1.4.1.7262.2.5.1.3.1.9DisplayStringread-onlycurrent
hzCpDiplexerSerialNo
OBJECT-TYPE
A textual string containing Serial no of the Diplexer.
1.3.6.1.4.1.7262.2.5.1.3.1.10DisplayStringread-onlycurrent
hzCpDiplexerAssemblyNo
OBJECT-TYPE
A textual string containing assembly no of the Diplexer.
1.3.6.1.4.1.7262.2.5.1.3.1.11DisplayStringread-onlycurrent
hzCpSystemCleiNo
OBJECT-TYPE
A textual string containing system CLEI code.
1.3.6.1.4.1.7262.2.5.1.3.1.12DisplayStringread-onlycurrent
hzCpSwInventory
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.1.3.2
hzCpSwInventoryTable
OBJECT-TYPE
Table contains the software inventory.
1.3.6.1.4.1.7262.2.5.1.3.2.1not-accessiblecurrent
hzCpSwInventoryEntry
OBJECT-TYPE
Software inventory entry.
1.3.6.1.4.1.7262.2.5.1.3.2.1.1not-accessiblecurrent
hzCpSwInvBank
OBJECT-TYPE
Software bank in the flash.
1.3.6.1.4.1.7262.2.5.1.3.2.1.1.1INTEGER {bank-A(1), bank-B(2)}read-onlycurrent
hzCpSwInvStatus
OBJECT-TYPE
Software bank status.
1.3.6.1.4.1.7262.2.5.1.3.2.1.1.2INTEGER {active(1), standby(2)}read-onlycurrent
hzCpSwInvOmniRelease
OBJECT-TYPE
The version number of the Omni.
1.3.6.1.4.1.7262.2.5.1.3.2.1.1.3DisplayStringread-onlycurrent
hzCpSwInvFrequencyFileVersion
OBJECT-TYPE
The version number of the frequency file.
1.3.6.1.4.1.7262.2.5.1.3.2.1.1.4DisplayStringread-onlycurrent
hzCpSwInvMibVersion
OBJECT-TYPE
The version number of the system MIB.
1.3.6.1.4.1.7262.2.5.1.3.2.1.1.5DisplayStringread-onlycurrent
hzCpSwInvBootloaderVersion
OBJECT-TYPE
The version number of the bootloader.
1.3.6.1.4.1.7262.2.5.1.3.2.1.1.6DisplayStringread-onlycurrent
hzCpPeerSysInfo
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.1.4
hzCpPeerMacAddress
OBJECT-TYPE
The MAC Address of the peer network interface card.
1.3.6.1.4.1.7262.2.5.1.4.1DisplayStringread-onlycurrent
hzCpPeerIpAddress
OBJECT-TYPE
The IP Address of the peer network interface card.
1.3.6.1.4.1.7262.2.5.1.4.2IpAddressread-onlycurrent
hzCpPeerSubnetMask
OBJECT-TYPE
The subnet mask for the peer network interface card.
1.3.6.1.4.1.7262.2.5.1.4.3IpAddressread-onlycurrent
hzCpPeerDefaultGateway
OBJECT-TYPE
The default gateway address of the peer node.
1.3.6.1.4.1.7262.2.5.1.4.4IpAddressread-onlycurrent
hzCpPeerIpv6Prefix
OBJECT-TYPE
The peer IPv6 prefix.
1.3.6.1.4.1.7262.2.5.1.4.5Integer32read-onlycurrent
hzCpPeerIpv6Domain
OBJECT-TYPE
The peer IPv6 domain.
1.3.6.1.4.1.7262.2.5.1.4.6InetAddressTyperead-onlycurrent
hzCpPeerIpv6Address
OBJECT-TYPE
The peer IPv6 address.
1.3.6.1.4.1.7262.2.5.1.4.7InetAddressread-onlycurrent
hzCpPeerIpv6GatewayDomain
OBJECT-TYPE
The peer IPv6 gateway domain.
1.3.6.1.4.1.7262.2.5.1.4.8InetAddressTyperead-onlycurrent
hzCpPeerIpv6GatewayAddress
OBJECT-TYPE
The peer IPv6 gateway address.
1.3.6.1.4.1.7262.2.5.1.4.9InetAddressread-onlycurrent
hzCpSysRedundancy
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.1.5
hzCpRedundancyMode
OBJECT-TYPE
allows the user to set system redundancy mode: [ off | primary-hsb | secondary-hsb | primary-x2 | secondary-x2 ]
1.3.6.1.4.1.7262.2.5.1.5.1INTEGER {off(1), primary-hsb(2), secondary-hsb(3), primary-x2(4), secondary-x2(5)}read-writecurrent
hzCpRedundancySwitchMode
OBJECT-TYPE
Allows the user to override the active link. User can force the link to stay on either force-active, force-standby, auto or manual.
1.3.6.1.4.1.7262.2.5.1.5.2INTEGER {auto(1), force-active(2), force-standby(3)}read-writecurrent
hzCpRedundancyStandbyEnetState
OBJECT-TYPE
Allows the user to set standby payload port state.
1.3.6.1.4.1.7262.2.5.1.5.3INTEGER {off(1), on(2), pulse(3)}read-writecurrent
hzCpRedundancyStateSwitch
OBJECT-TYPE
Allows the user to switch redundancy state.
1.3.6.1.4.1.7262.2.5.1.5.4INTEGER {on(1)}read-writecurrent
hzCpRedundancyMgmtSource
OBJECT-TYPE
When set to local-node, each node is managed locally through specified management interface. When set to standby-node, the management traffic for the partner is processed through the standby node interface.
1.3.6.1.4.1.7262.2.5.1.5.5INTEGER {local-node(1), active-node(2), standby-node(3)}read-writecurrent
hzCpRedundancyLinkSwitchParameters
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.1.5.6
hzCpRedundancyPrimaryTimeInActiveState
OBJECT-TYPE
Time, in miliseconds, given to the primary unit to establish a link once it becomes active.
1.3.6.1.4.1.7262.2.5.1.5.6.1Unsigned32read-writecurrent
hzCpRedundancyPrimarySwitchErrorThreshold
OBJECT-TYPE
The percent of allowed bad blocks, on the primary unit, needed to establish a link.
1.3.6.1.4.1.7262.2.5.1.5.6.2Unsigned32read-writecurrent
hzCpRedundancySecondaryTimeInActiveState
OBJECT-TYPE
Time, in miliseconds, given to the secondary unit to establish a link once it becomes active.
1.3.6.1.4.1.7262.2.5.1.5.6.3Unsigned32read-writecurrent
hzCpRedundancySecondarySwitchErrorThreshold
OBJECT-TYPE
The percent of allowed bad blocks, on the secondary unit, needed to establish a link.
1.3.6.1.4.1.7262.2.5.1.5.6.4Unsigned32read-writecurrent
hzCpRedundancyLinkMonitorParameters
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.1.5.7
hzCpRedundancyFaultPeriod
OBJECT-TYPE
The period of time, in milliseconds, for which the Fault Threshold is applied.
1.3.6.1.4.1.7262.2.5.1.5.7.1Unsigned32read-writecurrent
hzCpRedundancyFaultThreshold
OBJECT-TYPE
The maximum percentage of the bad blocks allowed in specified Fault Sample Period to maintain link when in active state.
1.3.6.1.4.1.7262.2.5.1.5.7.2Unsigned32read-writecurrent
hzCpPartnerSysInfo
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.1.5.8
hzCpPartnerMacAddress
OBJECT-TYPE
The MAC Address of the partner node.
1.3.6.1.4.1.7262.2.5.1.5.8.1DisplayStringread-onlycurrent
hzCpPartnerIpAddress
OBJECT-TYPE
The IP Address of the partner node.
1.3.6.1.4.1.7262.2.5.1.5.8.2IpAddressread-onlycurrent
hzCpPartnerSubnetMask
OBJECT-TYPE
The subnet mask for the partner node.
1.3.6.1.4.1.7262.2.5.1.5.8.3IpAddressread-onlycurrent
hzCpPartnerDefaultGateway
OBJECT-TYPE
The default gateway address of the partner node.
1.3.6.1.4.1.7262.2.5.1.5.8.4IpAddressread-onlycurrent
hzCpPartnerIpv6Prefix
OBJECT-TYPE
The IPv6 prefix of the partner node.
1.3.6.1.4.1.7262.2.5.1.5.8.5Integer32read-onlycurrent
hzCpPartnerIpv6Domain
OBJECT-TYPE
The IPv6 domain of the partner node.
1.3.6.1.4.1.7262.2.5.1.5.8.6InetAddressTyperead-onlycurrent
hzCpPartnerIpv6Address
OBJECT-TYPE
The IPv6 address of the partner node.
1.3.6.1.4.1.7262.2.5.1.5.8.7InetAddressread-onlycurrent
hzCpPartnerIpv6GatewayDomain
OBJECT-TYPE
The IPv6 gateway domain of the partner node.
1.3.6.1.4.1.7262.2.5.1.5.8.8InetAddressTyperead-onlycurrent
hzCpPartnerIpv6GatewayAddress
OBJECT-TYPE
The IPv6 gateway address of the partner node.
1.3.6.1.4.1.7262.2.5.1.5.8.9InetAddressread-onlycurrent
hzCpPeerPartnerSysInfo
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.1.5.9
hzCpPeerPartnerMacAddress
OBJECT-TYPE
The MAC Address of the partner's peer node.
1.3.6.1.4.1.7262.2.5.1.5.9.1DisplayStringread-onlycurrent
hzCpPeerPartnerIpAddress
OBJECT-TYPE
The IP Address of the partner's peer node.
1.3.6.1.4.1.7262.2.5.1.5.9.2IpAddressread-onlycurrent
hzCpPeerPartnerSubnetMask
OBJECT-TYPE
The subnet mask for the partner's peer node.
1.3.6.1.4.1.7262.2.5.1.5.9.3IpAddressread-onlycurrent
hzCpPeerPartnerDefaultGateway
OBJECT-TYPE
The default gateway address of the partner's peer node.
1.3.6.1.4.1.7262.2.5.1.5.9.4IpAddressread-onlycurrent
hzCpPeerPartnerIpv6Prefix
OBJECT-TYPE
The IPv6 prefix of the partner's peer node.
1.3.6.1.4.1.7262.2.5.1.5.9.5Integer32read-onlycurrent
hzCpPeerPartnerIpv6Domain
OBJECT-TYPE
The IPv6 domain of the partner's peer node.
1.3.6.1.4.1.7262.2.5.1.5.9.6InetAddressTyperead-onlycurrent
hzCpPeerPartnerIpv6Address
OBJECT-TYPE
The IPv6 address of the partner's peer node.
1.3.6.1.4.1.7262.2.5.1.5.9.7InetAddressread-onlycurrent
hzCpPeerPartnerIpv6GatewayDomain
OBJECT-TYPE
The IPv6 gateway domain of the partner's peer node.
1.3.6.1.4.1.7262.2.5.1.5.9.8InetAddressTyperead-onlycurrent
hzCpPeerPartnerIpv6GatewayAddress
OBJECT-TYPE
The IPv6 gateway address of the partner's peer node.
1.3.6.1.4.1.7262.2.5.1.5.9.9InetAddressread-onlycurrent
hzCpPartnerCommunication
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.1.5.10
hzCpPartnerAutoDiscovery
OBJECT-TYPE
Disables or enables the partner's auto discovery.
1.3.6.1.4.1.7262.2.5.1.5.10.1INTEGER {off(1), on(2)}read-writecurrent
hzCpPartnerMacAddressOverride
OBJECT-TYPE
The MAC Address for partner to be used when the auto discovery is disabled.
1.3.6.1.4.1.7262.2.5.1.5.10.2DisplayStringread-writecurrent
hzCpPartnerVlanTagging
OBJECT-TYPE
Disables or enables the VLAN tagging for partner's communication. VLAN tagging is the practice of inserting a VLAN Id into a packet header in order to identify which VLAN the packets belongs to.
1.3.6.1.4.1.7262.2.5.1.5.10.3INTEGER {off(1), on(2)}read-writecurrent
hzCpPartnerVlanTagId
OBJECT-TYPE
Indicates the VLAN Tag Id (1...4095) for partner's communication.
1.3.6.1.4.1.7262.2.5.1.5.10.4Integer32read-writecurrent
hzCpPartnerVlanTagPriority
OBJECT-TYPE
The priority for VLAN tagging (0...7) for partner's communication.
1.3.6.1.4.1.7262.2.5.1.5.10.5Integer32read-writecurrent
hzCpRedundancyStatus
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.1.5.11
hzCpRedundancyUserTrafficStatus
OBJECT-TYPE
Indicates the redundancy user traffic status.
1.3.6.1.4.1.7262.2.5.1.5.11.1DisplayStringread-onlycurrent
hzCpRedundancyWirelessLinkStatus
OBJECT-TYPE
Indicates the redundancy wireless link status.
1.3.6.1.4.1.7262.2.5.1.5.11.2DisplayStringread-onlycurrent
hzCpRedundancyEnetCrossLinkStatus
OBJECT-TYPE
Indicates the redundancy ethernet cross link status. Primary node is active and processing user traffic at one end of the link, and secondary node is active at the other end of the link resulting in end to end cross connection to user network equipment.
1.3.6.1.4.1.7262.2.5.1.5.11.3DisplayStringread-onlycurrent
hzCpRedundancyPortGroupStatus
OBJECT-TYPE
Indicates the redundancy port group status.
1.3.6.1.4.1.7262.2.5.1.5.11.4DisplayStringread-onlycurrent
hzCpSysDiagnostics
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.1.6
hzCpLoopback
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.1.6.1
hzCpLoopbackType
OBJECT-TYPE
What the user sets is cached until the loopback is started. The get returns the running status of the active loopback type.
1.3.6.1.4.1.7262.2.5.1.6.1.1INTEGER {off(1), radioNonNetwork(2), radioNetwork(3), networkNearEnd(4), networkFarEnd(5)}read-writecurrent
hzCpLoopbackTimeout
OBJECT-TYPE
The loopback timeout period.
1.3.6.1.4.1.7262.2.5.1.6.1.2Integer32read-writecurrent
hzCpLoopbackNetworkMac
OBJECT-TYPE
The MAC address used for network loopback.
1.3.6.1.4.1.7262.2.5.1.6.1.3DisplayStringread-writecurrent
hzCpLoopbackNetworkQueue
OBJECT-TYPE
The user queue used for far-end network loopback.
1.3.6.1.4.1.7262.2.5.1.6.1.4Integer32read-writecurrent
hzCpLoopbackNetworkPort
OBJECT-TYPE
The user enet port used for network loopback.
1.3.6.1.4.1.7262.2.5.1.6.1.5INTEGER {enet-port-1(1), enet-port-2(2), enet-port-3(3), enet-port-4(4)}read-writecurrent
hzCpLoopbackStart
OBJECT-TYPE
Start the loopback by writing '1' to this object.
1.3.6.1.4.1.7262.2.5.1.6.1.6INTEGER {start(1)}read-writecurrent
hzCpLoopbackStop
OBJECT-TYPE
Stop the loopback by writing '1' to this object.
1.3.6.1.4.1.7262.2.5.1.6.1.7INTEGER {stop(1)}read-writecurrent
hzCpHitlessAamDiagnostics
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.1.6.2
hzCpHitlessAamModemTable
OBJECT-TYPE
A table of Wireless Interface Modems
1.3.6.1.4.1.7262.2.5.1.6.2.1not-accessiblecurrent
hzCpHitlessAamModemEntry
OBJECT-TYPE
A Wireless Interface Modem
1.3.6.1.4.1.7262.2.5.1.6.2.1.1not-accessiblecurrent
hzCpHitlessAamModemIndex
OBJECT-TYPE
A unique value for each interface.
1.3.6.1.4.1.7262.2.5.1.6.2.1.1.1INTEGER {modem-1(1)}read-onlycurrent
hzCpHitlessAamModemDiagnose
OBJECT-TYPE
This service effecting object accepts either 'up' or 'down' to diagnose whether the modulation speed can be increased or decreased respectively for modem. Poll the hzCpHitlessAamModemDiagnosticResult object to determine the results.
1.3.6.1.4.1.7262.2.5.1.6.2.1.1.2INTEGER {up(1), down(2)}read-writecurrent
hzCpHitlessAamModemDiagnosticResult
OBJECT-TYPE
The result from Hitless AAM Diagnostic is read from this object.
1.3.6.1.4.1.7262.2.5.1.6.2.1.1.3DisplayStringread-onlycurrent
hzCpCodeCheckCount
OBJECT-TYPE
A counter representing the number of queue-freezup error correction that has encountered in the system.
1.3.6.1.4.1.7262.2.5.1.6.3Integer32read-onlycurrent
hzCpSysLicensedFeatureGroups
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.1.7
hzCpSysUpgradeFeatureGroupsTable
OBJECT-TYPE
A table of system upgrade feature groups.
1.3.6.1.4.1.7262.2.5.1.7.1not-accessiblecurrent
hzCpSysUpgradeFeatureGroupsEntry
OBJECT-TYPE
A system upgrade feature group entry containing all licensed feature groups.
1.3.6.1.4.1.7262.2.5.1.7.1.1not-accessiblecurrent
hzCpUpgradeLicensedFeatureIndex
OBJECT-TYPE
A unique value for each licensed group.
1.3.6.1.4.1.7262.2.5.1.7.1.1.1INTEGER {rls(1), eoamEcfmLldp(2), hitlessAam(3), bac(4), encryption(5)}read-onlycurrent
hzCpUpgradeLicensedFeatureKey
OBJECT-TYPE
The key required for upgrading a feature.
1.3.6.1.4.1.7262.2.5.1.7.1.1.2DisplayStringread-writecurrent
hzCpUpgradeLicensedFeatureCount
OBJECT-TYPE
This object indicates the number of times the licensed feature has been changed successfully.
1.3.6.1.4.1.7262.2.5.1.7.1.1.3Integer32read-onlycurrent
hzCpSysDowngradeFeatureGroupsTable
OBJECT-TYPE
A table of system downgrade system groups.
1.3.6.1.4.1.7262.2.5.1.7.2not-accessiblecurrent
hzCpSysDowngradeFeatureGroupsEntry
OBJECT-TYPE
A system downgrade feature group entry containing all licensed feature groups.
1.3.6.1.4.1.7262.2.5.1.7.2.1not-accessiblecurrent
hzCpDowngradeLicensedFeatureIndex
OBJECT-TYPE
A unique value for each licensed group.
1.3.6.1.4.1.7262.2.5.1.7.2.1.1INTEGER {rls(1), eoamEcfmLldp(2), hitlessAam(3), bac(4), encryption(5)}read-onlycurrent
hzCpDowngradeLicensedFeature
OBJECT-TYPE
Downgrading a licensed feature.
1.3.6.1.4.1.7262.2.5.1.7.2.1.2INTEGER {downgrade(1)}read-writecurrent
hzCpDowngradeLicensedFeatureCount
OBJECT-TYPE
This object indicates the number of times the licensed feature has been downgraded.
1.3.6.1.4.1.7262.2.5.1.7.2.1.3Integer32read-onlycurrent
hzCpDowngradeLicensedFeatureKey
OBJECT-TYPE
The key generated after downgrading a licensed feature.
1.3.6.1.4.1.7262.2.5.1.7.2.1.4DisplayStringread-onlycurrent
hzCpSysLicensedFeatureGroupsTable
OBJECT-TYPE
A table of licensed feature groups.
1.3.6.1.4.1.7262.2.5.1.7.3not-accessiblecurrent
hzCpSysLicensedFeatureGroupsEntry
OBJECT-TYPE
A system feature group entry containing all licensed feature groups.
1.3.6.1.4.1.7262.2.5.1.7.3.1not-accessiblecurrent
hzCpSysLicensedFeatureGroupIndex
OBJECT-TYPE
A unique value for each licensed group.
1.3.6.1.4.1.7262.2.5.1.7.3.1.1INTEGER {rls(1), eoamEcfmLldp(2), hitlessAam(3), bac(4), encryption(5)}read-onlycurrent
hzCpSysLicensedFeatureGroup
OBJECT-TYPE
The name of the licensed feature group.
1.3.6.1.4.1.7262.2.5.1.7.3.1.2DisplayStringread-onlycurrent
hzCpSysLicensedFeatureGroupStatus
OBJECT-TYPE
Specifies whether the feature group is unlicensed or licensed.
1.3.6.1.4.1.7262.2.5.1.7.3.1.3INTEGER {unlicensed(1), licensed(2)}read-onlycurrent
hzCpPeerAuthentication
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.1.8
hzCpPeerAuthenticationUniqueKey
OBJECT-TYPE
The serial number of the peer node that this node will communicate with. This is only used when authentication mode is set to unique.
1.3.6.1.4.1.7262.2.5.1.8.1DisplayString (SIZE(0..34))read-writecurrent
hzCpPeerAuthenticationMode
OBJECT-TYPE
This sets the authentication mode for the system. If configured for unique authentication, a node only exchanges user traffic with one other node. The serial number is used in this case. If configured for group authentication, a node exchanges user traffic with another node of the same group and uses the authentication keys.
1.3.6.1.4.1.7262.2.5.1.8.2INTEGER {none(1), unique(2), group(3)}read-writecurrent
hzCpPeerAuthenticationFailureAction
OBJECT-TYPE
This sets the authentication failure action for the system. Block traffic will block all user traffic including remote management access. Pass traffic will allow all user traffic to be sent and recieved
1.3.6.1.4.1.7262.2.5.1.8.3INTEGER {blockTraffic(1), passTraffic(2)}read-writecurrent
hzCpPeerAuthenticationStatus
OBJECT-TYPE
Specifies the current authentication status of the system. Authenticated means authentication is on and the system has been authenticated, notAuthenticated means authentication is off or the system has not communicated yet with the other node, explicit authentication failure means authentication is on and authentication has failed
1.3.6.1.4.1.7262.2.5.1.8.4INTEGER {notAuthenticated(1), authenticated(2), explicitAuthenticationFailure(3)}read-onlycurrent
hzCpPeerAuthenticationGroupKey
OBJECT-TYPE
The serial number of the group that this node will communicate within. This is only used when authentication mode is set to group.
1.3.6.1.4.1.7262.2.5.1.8.5DisplayString (SIZE(0..34))read-writecurrent
hzCpCalendar
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.1.9
hzCpDate
OBJECT-TYPE
A string in the format as follows: XX/YY/ZZ Where XX = day of month (range 01 to 31) YY = month of year(range 01 to 12) ZZ = year (range 01 - 99)
1.3.6.1.4.1.7262.2.5.1.9.1DisplayStringread-writecurrent
hzCpTime
OBJECT-TYPE
A string in the format as follows: aa:bb:cc.ddd Where aa = hour of day ( range 00 to 23 ) bb = minute of hour ( range 00 to 59 ) cc = second of minute( range 00 to 59 ) ddd = thousandths of second (range 000 to 999)
1.3.6.1.4.1.7262.2.5.1.9.2DisplayStringread-writecurrent
hzCpDateAndTimeForLastTimeChange
OBJECT-TYPE
Date and Time for the last System time adjustment
1.3.6.1.4.1.7262.2.5.1.9.3DateAndTimeread-onlycurrent
hzCpLastTimeChange
OBJECT-TYPE
Last System time adjustment in hundredths of seconds
1.3.6.1.4.1.7262.2.5.1.9.4Integer32read-onlycurrent
hzCpCumulativeTimeChange
OBJECT-TYPE
Cumulative System time adjustmen in hundredths of seconds
1.3.6.1.4.1.7262.2.5.1.9.5Integer32read-onlycurrent
hzCpSntp
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.1.10
hzCpSntpEnable
OBJECT-TYPE
Indicates whether SNTP feature is enabled.
1.3.6.1.4.1.7262.2.5.1.10.1INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpSntpOffset
OBJECT-TYPE
System time offset from GMT in tenths of hours. For example, an offset of 10 indicates 10 tenths, or 1 hour. An offset of 5 indicates half an hour.
1.3.6.1.4.1.7262.2.5.1.10.2Integer32 (-140..140)read-writecurrent
hzCpSntpServerDepTable
OBJECT-TYPE
Table containing SNTP server entries
1.3.6.1.4.1.7262.2.5.1.10.3not-accessibledeprecated
hzCpSntpServerDepEntry
OBJECT-TYPE
Contains the SNTP server information
1.3.6.1.4.1.7262.2.5.1.10.3.1not-accessibledeprecated
hzCpSntpServerIndexDep
OBJECT-TYPE
A unique value for each server.
1.3.6.1.4.1.7262.2.5.1.10.3.1.1Integer32read-onlydeprecated
hzCpSntpServerIpAddressDep
OBJECT-TYPE
The IP address of the SNTP server. This object is deprecated by hzCpSntpServerAddress. The value is 0.0.0.0 if not available or not applicable.
1.3.6.1.4.1.7262.2.5.1.10.3.1.2IpAddressread-onlydeprecated
hzCpSntpServerStatusDep
OBJECT-TYPE
The status of the SNTP server.
1.3.6.1.4.1.7262.2.5.1.10.3.1.3INTEGER {good(1), failed(2)}read-onlydeprecated
hzCpSntpServerStratumDep
OBJECT-TYPE
Specifies the stratum of a server, 0 for failed server
1.3.6.1.4.1.7262.2.5.1.10.3.1.4Integer32read-onlydeprecated
hzCpSntpServerTable
OBJECT-TYPE
Table containing SNTP server entries
1.3.6.1.4.1.7262.2.5.1.10.4not-accessiblecurrent
hzCpSntpServerEntry
OBJECT-TYPE
Contains the SNTP server information
1.3.6.1.4.1.7262.2.5.1.10.4.1not-accessiblecurrent
hzCpSntpServerIndex
OBJECT-TYPE
A unique value for each server.
1.3.6.1.4.1.7262.2.5.1.10.4.1.1Integer32read-onlycurrent
hzCpSntpServerDomain
OBJECT-TYPE
Indicates SNTP server inet address type. Valid types are ipv4 or ipv6.
1.3.6.1.4.1.7262.2.5.1.10.4.1.2InetAddressTyperead-writecurrent
hzCpSntpServerAddress
OBJECT-TYPE
Indicates SNTP server inet address octet string.
1.3.6.1.4.1.7262.2.5.1.10.4.1.3InetAddressread-writecurrent
hzCpSntpServerStatus
OBJECT-TYPE
The status of the SNTP server.
1.3.6.1.4.1.7262.2.5.1.10.4.1.4INTEGER {good(1), failed(2)}read-onlycurrent
hzCpSntpServerStratum
OBJECT-TYPE
Specifies the stratum of a server, 0 for failed server
1.3.6.1.4.1.7262.2.5.1.10.4.1.5Integer32read-onlycurrent
hzCpSntpRestoreDefault
OBJECT-TYPE
Restores SNTP servers to default Addresses.
1.3.6.1.4.1.7262.2.5.1.10.5INTEGER {restore(1)}read-writecurrent
hzCpSyncE
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.1.11
hzCpSyncEState
OBJECT-TYPE
In manual mode, syncE source will use primary clock source and when the primary source has loss of lock, the syncE goes into holdover. The primary source will be used again after it comes back. In auto mode, if the current source has trouble, it will try to recover from the other source.
1.3.6.1.4.1.7262.2.5.1.11.1INTEGER {off(1), manual(2), auto(3)}read-writecurrent
hzCpSyncEPrimarySource
OBJECT-TYPE
Selects which port to be used as syncE master clock source.
1.3.6.1.4.1.7262.2.5.1.11.2INTEGER {p1(1), p2(2), p3(3), p4(4), wp1(5), free-run(6)}read-writecurrent
hzCpSyncESecondarySource
OBJECT-TYPE
Selects which port to be used as syncE secondary when the master syncE is not available.
1.3.6.1.4.1.7262.2.5.1.11.3INTEGER {p1(1), p2(2), p3(3), p4(4), wp1(5), free-run(6)}read-writecurrent
hzCpSyncEMemberPorts
OBJECT-TYPE
Enter a string indicating all SyncE member ports. Example: p1 p4 Port options: p1 p2 p3 p4 wp1
1.3.6.1.4.1.7262.2.5.1.11.4DisplayStringread-writecurrent
hzCpSyncEForcedHoldover
OBJECT-TYPE
This forces SyncE into holdover mode. After the configurable timeout value, the forced holdover will be over. The forced timeout can be 0 to 300sec, 0 means infinite and default is 30sec. An example of the format of the string is as follows: 'on 20' or 'off'. The second parameter when holdover is the time in sec. The single quote marks i.e. ' ' are not used in the command.
1.3.6.1.4.1.7262.2.5.1.11.5DisplayStringread-writecurrent
hzCpSyncERevertive
OBJECT-TYPE
In revertive mode, if the current source is secondary and the primary is Ok for configured amount of time, the primary will be used. The default revertive time is 10sec. An example of the format of the string is as follows: 'on 20' or 'off'. The second parameter when revertive is turned on is the time in sec. The single quote marks i.e. ' ' are not used in the command.
1.3.6.1.4.1.7262.2.5.1.11.6DisplayStringread-writecurrent
hzCpSyncEClockSource
OBJECT-TYPE
Retrieves Synce clock source.
1.3.6.1.4.1.7262.2.5.1.11.7INTEGER {p1(1), p2(2), p3(3), p4(4), wp1(5), free-run(6)}read-onlycurrent
hzCpSyncEAcquisitionStatus
OBJECT-TYPE
Retrieves Synce acquisition status.
1.3.6.1.4.1.7262.2.5.1.11.8DisplayStringread-onlycurrent
hzCpSyncEWanderFilter
OBJECT-TYPE
ITU G.8262 specifies different wander filter requirements for networks based on the 2.048 kbit/s hiearchy , option1, vs those based on the 1.544kbit/s hiearchy, option2. Option 2 specifies a low pass filter bandwidth of 0.1Hz, while option1 specifies a badwidth between 1 and10 Hz.
1.3.6.1.4.1.7262.2.5.1.11.9INTEGER {option1(1), option2(2)}read-writecurrent
hzCpBac
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.1.12
hzCpBacRecordAvgPeriod
OBJECT-TYPE
Configures the average period used for computing the running average BAC gain and uncompressed ratio. Default average period is set to 10 seconds.
1.3.6.1.4.1.7262.2.5.1.12.1Integer32read-writecurrent
hzCpBacTable
OBJECT-TYPE
Table containing BAC entries
1.3.6.1.4.1.7262.2.5.1.12.2not-accessiblecurrent
hzCpBacEntry
OBJECT-TYPE
Contains the BAC information for all queues
1.3.6.1.4.1.7262.2.5.1.12.2.1not-accessiblecurrent
hzCpBacQIndex
OBJECT-TYPE
A unique value for each of the 8 Queues.
1.3.6.1.4.1.7262.2.5.1.12.2.1.1INTEGER {q1(1), q2(2), q3(3), q4(4), q5(5), q6(6), q7(7), q8(8)}read-onlycurrent
hzCpBacQEnable
OBJECT-TYPE
Configure queue compression state to disable/enable.
1.3.6.1.4.1.7262.2.5.1.12.2.1.2INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpBacQBlockSize
OBJECT-TYPE
Configure queue compression block size (256...8000). Block size has to be in increments of 64 bytes. Otherwise it will be rounded off to nearest 64 bytes. Valid block sizes are <256 512 1024 4032 8000>
1.3.6.1.4.1.7262.2.5.1.12.2.1.3Integer32read-writecurrent
hzCpBacRecordLogging
OBJECT-TYPE
Enables/disables logging of BAC related statistics like Maximum BAC gain and Maximum uncompressed ratio on a per queue basis to syslog and flashlog.
1.3.6.1.4.1.7262.2.5.1.12.2.1.4INTEGER {off(1), on(2)}read-writecurrent
hzCpBacUncompressedRatio
OBJECT-TYPE
Running average Uncompressed ratio is calculated by collecting n samples of bytes uncompressed and bytes in data over specified average period in percentage.
1.3.6.1.4.1.7262.2.5.1.12.2.1.5DisplayStringread-onlycurrent
hzCpBacGain
OBJECT-TYPE
The Running Average BAC gain is the sum of all bytes getting into the compressor divided by the sum of all bytes compressed and bytes uncompressed calculated over an average period.
1.3.6.1.4.1.7262.2.5.1.12.2.1.6DisplayStringread-onlycurrent
hzCpEcfmVsm
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.1.13
hzCpBandwidthVsm
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.1.13.1
hzCpBwVsmVendorOui
OBJECT-TYPE
As string representing the vendor OUI code. Example: 00-00-0C for Cisco
1.3.6.1.4.1.7262.2.5.1.13.1.1DisplayStringread-writecurrent
hzCpBwVsmMdLevel
OBJECT-TYPE
The Maintenanc level of Bandwidth VSM. The valid range is between 0-7. By default, the BW-VSM is associated with Maintenance Level 0.
1.3.6.1.4.1.7262.2.5.1.13.1.2Integer32read-writecurrent
hzCpBwVsmWaitTime
OBJECT-TYPE
The wait time before sending vendor specific message.
1.3.6.1.4.1.7262.2.5.1.13.1.3Integer32read-writecurrent
hzCpBwVsmPeriod
OBJECT-TYPE
This indicates the VSM transmission period. The default value is 10 seconds.
1.3.6.1.4.1.7262.2.5.1.13.1.4INTEGER {one-sec(1), ten-sec(2), one-min(3)}read-writecurrent
hzCpBwVsmVlanTag
OBJECT-TYPE
Bandwidth VSM can be configured to be transmitted with a configurable valid VLAN tag. By default, the BW-VSM will be sent untagged.
1.3.6.1.4.1.7262.2.5.1.13.1.5INTEGER {disable(1), enable(2)}read-writecurrent
hzCpBwVsmVlanId
OBJECT-TYPE
This indicates the VSM VLAN Id.
1.3.6.1.4.1.7262.2.5.1.13.1.6Integer32read-writecurrent
hzCpBwVsmVlanPriority
OBJECT-TYPE
This indicates the VSM priority. The valid range is between 1-7 and the default priority is 7.
1.3.6.1.4.1.7262.2.5.1.13.1.7Integer32read-writecurrent
hzCpBwVsmPortList
OBJECT-TYPE
The vendor specific message will only be sent out through the specified ports in the list. Port options: a comma-separted list of ports p1 to p4 Example: p1,p2
1.3.6.1.4.1.7262.2.5.1.13.1.8DisplayStringread-writecurrent
hzCpBwVsmState
OBJECT-TYPE
This enables or disables vendor specific messaging.
1.3.6.1.4.1.7262.2.5.1.13.1.9INTEGER {disable(1), enable(2)}read-writecurrent
hzCpPM
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.1.14
hzCpPmRspiThresholdTable
OBJECT-TYPE
Performance Monitoring table for Radio Synchronous Physical Interface thresholds.
1.3.6.1.4.1.7262.2.5.1.14.1not-accessiblecurrent
hzCpPmRspiThresholdEntry
OBJECT-TYPE
Contains information for Radio Synchronous Physical Interface thresholds.
1.3.6.1.4.1.7262.2.5.1.14.1.1not-accessiblecurrent
hzCpPmRspiThrIndex
OBJECT-TYPE
Index to PM RSPI Threshold table.
1.3.6.1.4.1.7262.2.5.1.14.1.1.1Integer32not-accessiblecurrent
hzCpPmRLT1
OBJECT-TYPE
Receive Level Threshold 1, represents the number of seconds below the first threshold.
1.3.6.1.4.1.7262.2.5.1.14.1.1.2Integer32read-writecurrent
hzCpPmRLT2
OBJECT-TYPE
Receive Level Threshold 2, represents the number of seconds below the second threshold.
1.3.6.1.4.1.7262.2.5.1.14.1.1.3Integer32read-writecurrent
hzCpPmRLT3
OBJECT-TYPE
Receive Level Threshold 3, represents the number of seconds below the third threshold.
1.3.6.1.4.1.7262.2.5.1.14.1.1.4Integer32read-writecurrent
hzCpPmRLT4
OBJECT-TYPE
Receive Level Threshold 4, represents the number of seconds below the fourth threshold.
1.3.6.1.4.1.7262.2.5.1.14.1.1.5Integer32read-writecurrent
hzCpPmTLT1
OBJECT-TYPE
Transmit Level Threshold 1, represents the number of seconds below the first threshold.
1.3.6.1.4.1.7262.2.5.1.14.1.1.6Integer32read-writecurrent
hzCpPmTLT2
OBJECT-TYPE
Transmit Level Threshold 2, represents the number of seconds below the second threshold.
1.3.6.1.4.1.7262.2.5.1.14.1.1.7Integer32read-writecurrent
hzCpPmRspiThrRowStatus
OBJECT-TYPE
This object is used for applying all RSPI thresholds simultaneously.
1.3.6.1.4.1.7262.2.5.1.14.1.1.8RowStatusread-writecurrent
hzCpPmAdvThresholdTable
OBJECT-TYPE
Performance Monitoring table for Capacity thresholds.
1.3.6.1.4.1.7262.2.5.1.14.2not-accessiblecurrent
hzCpPmAdvThresholdEntry
OBJECT-TYPE
Contains information for Capacity thresholds.
1.3.6.1.4.1.7262.2.5.1.14.2.1not-accessiblecurrent
hzCpPmAdvThrIndex
OBJECT-TYPE
Index to PM Capacity Threshold table.
1.3.6.1.4.1.7262.2.5.1.14.2.1.1Integer32not-accessiblecurrent
hzCpPmAdvTxHitsT1
OBJECT-TYPE
Transmit Hits Threshold 1.
1.3.6.1.4.1.7262.2.5.1.14.2.1.2Integer32read-writecurrent
hzCpPmAdvRxHitsT1
OBJECT-TYPE
Receive Hits Threshold 1.
1.3.6.1.4.1.7262.2.5.1.14.2.1.3Integer32read-writecurrent
hzCpPmAdvRowStatus
OBJECT-TYPE
This object is used for applying all Capacity thresholds simultaneously.
1.3.6.1.4.1.7262.2.5.1.14.2.1.4RowStatusread-writecurrent
hzCpManagement
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.2
hzCpMacAddress
OBJECT-TYPE
The MAC Address of the system.
1.3.6.1.4.1.7262.2.5.2.1DisplayStringread-onlycurrent
hzCpTelnetAccessMode
OBJECT-TYPE
Indicates whether Telnet access is allowed.
1.3.6.1.4.1.7262.2.5.2.2INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpSshAccessMode
OBJECT-TYPE
Indicates whether ssh access is allowed.
1.3.6.1.4.1.7262.2.5.2.3INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpNetworkManagementInterface
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.2.4
hzCpNetMgmtInterfaceVlan
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.2.4.1
hzCpNetMgmtPortList
OBJECT-TYPE
Describes the network management interface connection options. Enter a string indicating the management port. Example: p3 Port options: p1 or p2 or p3 or p4 or dp1 or dp2 or dp3 or dp4 Note: Need to set hzCpNetMgmtAppyToSystem if you want the changes to take effect in the system.
1.3.6.1.4.1.7262.2.5.2.4.1.1DisplayStringread-writecurrent
hzCpNetMgmtVlanTagId
OBJECT-TYPE
Indicates the VLAN Tag Id (1...4095). Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set.
1.3.6.1.4.1.7262.2.5.2.4.1.2Integer32 (1..4095)read-writecurrent
hzCpNetMgmtVlanTagPriority
OBJECT-TYPE
The priority for VLAN tagging (0...7) Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set.
1.3.6.1.4.1.7262.2.5.2.4.1.3Integer32 (0..7)read-writecurrent
hzCpNetMgmtVlanTagging
OBJECT-TYPE
Disables or enables VLAN tagging. VLAN tagging is the practice of inserting a VLAN Id into a packet header in order to identify which VLAN the packets belongs to. Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set.
1.3.6.1.4.1.7262.2.5.2.4.1.4INTEGER {disable(1), enable(2)}read-writecurrent
hzCpNetMgmtDscpPriority
OBJECT-TYPE
The Differentiated Serices Code Point (DSCP) priority to classify and prioritize types of traffic (0...63) Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set.
1.3.6.1.4.1.7262.2.5.2.4.1.5Integer32read-writecurrent
hzCpNetMgmtIpv4
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.2.4.2
hzCpIpAddress
OBJECT-TYPE
The IP Address of the system. Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set.
1.3.6.1.4.1.7262.2.5.2.4.2.1IpAddressread-writecurrent
hzCpSubnetMask
OBJECT-TYPE
The subnet mask for the system. Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set.
1.3.6.1.4.1.7262.2.5.2.4.2.2IpAddressread-writecurrent
hzCpDefaultGateway
OBJECT-TYPE
The default gateway for the system. Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set.
1.3.6.1.4.1.7262.2.5.2.4.2.3IpAddressread-writecurrent
hzCpNetMgmttIpv6
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.2.4.3
hzCpIpv6Domain
OBJECT-TYPE
Indicates ipv6 inet address type.
1.3.6.1.4.1.7262.2.5.2.4.3.1InetAddressTyperead-onlycurrent
hzCpIpv6Address
OBJECT-TYPE
Indicates ipv6 inet address octet string. Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set.
1.3.6.1.4.1.7262.2.5.2.4.3.2InetAddressread-writecurrent
hzCpIpv6Prefix
OBJECT-TYPE
Indicates ipv6 prefix. Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set.
1.3.6.1.4.1.7262.2.5.2.4.3.3Integer32read-writecurrent
hzCpIpv6GatewayDomain
OBJECT-TYPE
Indicates ipv6 gateway inet address type.
1.3.6.1.4.1.7262.2.5.2.4.3.4InetAddressTyperead-onlycurrent
hzCpIpv6GatewayAddress
OBJECT-TYPE
Indicates ipv6 gateway inet address octet string. Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set.
1.3.6.1.4.1.7262.2.5.2.4.3.5InetAddressread-writecurrent
hzCpIpv6LinkLocalDomain
OBJECT-TYPE
Indicates ipv6 link local inet address type.
1.3.6.1.4.1.7262.2.5.2.4.3.6InetAddressTyperead-onlycurrent
hzCpIpv6LinkLocalAddress
OBJECT-TYPE
Indicates ipv6 link local inet address octet string.
1.3.6.1.4.1.7262.2.5.2.4.3.7InetAddressread-onlycurrent
hzCpNetMgmtApplyToSystem
OBJECT-TYPE
If system allows, setting this oid applies all network management interface changes to the system and a system reset can be avoided.
1.3.6.1.4.1.7262.2.5.2.4.4INTEGER {apply(1)}read-writecurrent
hzCpSnmp
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.2.5
hzCpSnmpUserAccess
OBJECT-TYPE
Specifies the user access to the system. If access is set to 'explicitManagers' then only managers with ip addresses set in snmpManagersTable will be able to gain SNMP access to the system. If access is set to 'any' then any manager with any-community-name will be able to gain SNMP access to the system
1.3.6.1.4.1.7262.2.5.2.5.1INTEGER {explicitManagers(1), any(2)}read-writecurrent
hzCpSnmpManagerAnyCommunityName
OBJECT-TYPE
The community string name used by the 'any' manager.
1.3.6.1.4.1.7262.2.5.2.5.2DisplayString (SIZE(0..32))read-writecurrent
hzCpSnmpSetRequests
OBJECT-TYPE
Indicates whether SNMP SET requests are allowed.
1.3.6.1.4.1.7262.2.5.2.5.3INTEGER {disabled(1), enabled(2)}read-onlycurrent
hzCpSnmpManagersDepTable
OBJECT-TYPE
Table containing snmp manager entries
1.3.6.1.4.1.7262.2.5.2.5.4not-accessibledeprecated
hzCpSnmpManagersDepEntry
OBJECT-TYPE
Contains the snmp manager information
1.3.6.1.4.1.7262.2.5.2.5.4.1not-accessibledeprecated
hzCpSnmpManagersIndexDep
OBJECT-TYPE
A unique value for each manager.
1.3.6.1.4.1.7262.2.5.2.5.4.1.1Integer32read-onlydeprecated
hzCpSnmpManagerIpAddressDep
OBJECT-TYPE
This object is deprecated by hzCpSnmpManagerAddress. The value is 0.0.0.0 if not available or not applicable.
1.3.6.1.4.1.7262.2.5.2.5.4.1.2IpAddressread-onlydeprecated
hzCpSnmpManagerCommunityNameDep
OBJECT-TYPE
The community string name used by the manager.
1.3.6.1.4.1.7262.2.5.2.5.4.1.3DisplayString (SIZE(0..24))read-onlydeprecated
hzCpSnmpManagerActivatedDep
OBJECT-TYPE
Specifies whether a specific manager is allowed to access the system. This object is deprecated by hzCpSnmpManagersActivated. The value is 0.0.0.0 if not available or not applicable.
1.3.6.1.4.1.7262.2.5.2.5.4.1.4INTEGER {notActive(1), active(2)}read-onlydeprecated
hzCpSnmpV3ManagersTable
OBJECT-TYPE
Table containing snmp V3 manager entries
1.3.6.1.4.1.7262.2.5.2.5.5not-accessiblecurrent
hzCpSnmpV3ManagersEntry
OBJECT-TYPE
Contains the snmp v3 manager information
1.3.6.1.4.1.7262.2.5.2.5.5.1not-accessiblecurrent
hzCpSnmpV3ManagersIndex
OBJECT-TYPE
A unique value for each v3 manager.
1.3.6.1.4.1.7262.2.5.2.5.5.1.1Integer32read-onlycurrent
hzCpSnmpV3ManagerUserName
OBJECT-TYPE
The user name of the v3 Manager.
1.3.6.1.4.1.7262.2.5.2.5.5.1.2DisplayString (SIZE(0..32))read-writecurrent
hzCpSnmpV3ManagerAuthProtocol
OBJECT-TYPE
The authentication alogorithm used by the v3 manager.
1.3.6.1.4.1.7262.2.5.2.5.5.1.3INTEGER {noAuth(1), md5(2), sha(3)}read-writecurrent
hzCpSnmpV3ManagerAuthPassword
OBJECT-TYPE
The authentication password of the v3 Manager.
1.3.6.1.4.1.7262.2.5.2.5.5.1.4DisplayString (SIZE(0..32))read-writecurrent
hzCpSnmpV3ManagerPrivProtocol
OBJECT-TYPE
The privacy encryption alogorithm used by the v3 manager.
1.3.6.1.4.1.7262.2.5.2.5.5.1.5INTEGER {noPriv(1), des(2)}read-writecurrent
hzCpSnmpV3ManagerPrivPassword
OBJECT-TYPE
The privacy password of the v3 Manager.
1.3.6.1.4.1.7262.2.5.2.5.5.1.6DisplayString (SIZE(0..32))read-writecurrent
hzCpSnmpV3ManagerActivated
OBJECT-TYPE
Specifies whether a specific v3 manager is allowed to access the system
1.3.6.1.4.1.7262.2.5.2.5.5.1.7INTEGER {notActive(1), active(2)}read-writecurrent
hzCpSnmpAccessMode
OBJECT-TYPE
Indicates the running SNMP version on the system.
1.3.6.1.4.1.7262.2.5.2.5.6INTEGER {off(1), v1(2), v2c(3), v3(4)}read-onlycurrent
hzCpSnmpManagersTable
OBJECT-TYPE
Table containing snmp manager entries
1.3.6.1.4.1.7262.2.5.2.5.7not-accessiblecurrent
hzCpSnmpManagersEntry
OBJECT-TYPE
Contains the snmp manager information
1.3.6.1.4.1.7262.2.5.2.5.7.1not-accessiblecurrent
hzCpSnmpManagersIndex
OBJECT-TYPE
A unique value for each manager.
1.3.6.1.4.1.7262.2.5.2.5.7.1.1Integer32read-onlycurrent
hzCpSnmpManagerDomain
OBJECT-TYPE
Indicates snmp manager inet address type. Valid types are ipv4 or ipv6.
1.3.6.1.4.1.7262.2.5.2.5.7.1.2InetAddressTyperead-writecurrent
hzCpSnmpManagerAddress
OBJECT-TYPE
Indicates snmp manager inet address octet string.
1.3.6.1.4.1.7262.2.5.2.5.7.1.3InetAddressread-writecurrent
hzCpSnmpManagerCommunityName
OBJECT-TYPE
The community string name used by the manager.
1.3.6.1.4.1.7262.2.5.2.5.7.1.4DisplayString (SIZE(0..32))read-writecurrent
hzCpSnmpManagersPrefixLength
OBJECT-TYPE
The Ip Address prefix length. The valid range for IPV4 Address is 1-32 and for IPV6 is 1-128.
1.3.6.1.4.1.7262.2.5.2.5.7.1.5InetAddressPrefixLengthread-writecurrent
hzCpSnmpManagerActivated
OBJECT-TYPE
Specifies whether a specific manager is allowed to access the system. This object deprecates hzCpSnmpManagerActivatedDep.
1.3.6.1.4.1.7262.2.5.2.5.7.1.32INTEGER {notActive(1), active(2)}read-writecurrent
hzCpTrapConfig
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.2.6
hzCpSnmpTrapHostDepTable
OBJECT-TYPE
Table containing SNMP trap host entries.
1.3.6.1.4.1.7262.2.5.2.6.1not-accessibledeprecated
hzCpSnmpTrapHostDepEntry
OBJECT-TYPE
The snmp trap host entry containing all the trap host information
1.3.6.1.4.1.7262.2.5.2.6.1.1not-accessibledeprecated
hzCpSnmpTrapHostIndexDep
OBJECT-TYPE
A unique value for each trap host.
1.3.6.1.4.1.7262.2.5.2.6.1.1.1Integer32read-onlydeprecated
hzCpSnmpTrapHostIpAddressDep
OBJECT-TYPE
This object is deprecated by hzCpSnmpV3TrapHostAddress. The value is 0.0.0.0 if not available or not applicable.
1.3.6.1.4.1.7262.2.5.2.6.1.1.2IpAddressread-onlydeprecated
hzCpSnmpTrapHostCommunityNameDep
OBJECT-TYPE
The community string name used in Traps.
1.3.6.1.4.1.7262.2.5.2.6.1.1.3DisplayString (SIZE(0..24))read-onlydeprecated
hzCpSnmpTrapHostActivatedDep
OBJECT-TYPE
This object is deprecated by hzCpSnmpTrapHostActivated. The value is 0.0.0.0 if not available or not applicable.
1.3.6.1.4.1.7262.2.5.2.6.1.1.4INTEGER {notActive(1), active(2)}read-onlydeprecated
hzCpSnmpV3TrapHostsDepTable
OBJECT-TYPE
Table containing snmp V3 trap host entries
1.3.6.1.4.1.7262.2.5.2.6.2not-accessibledeprecated
hzCpSnmpV3TrapHostsDepEntry
OBJECT-TYPE
Contains the snmp v3 trap host information
1.3.6.1.4.1.7262.2.5.2.6.2.1not-accessibledeprecated
hzCpSnmpV3TrapHostsIndexDep
OBJECT-TYPE
A unique value for each v3 trap host.
1.3.6.1.4.1.7262.2.5.2.6.2.1.1Integer32 (0..4)read-onlydeprecated
hzCpSnmpV3TrapHostIpAddressDep
OBJECT-TYPE
This object is deprecated by hzCpSnmpV3TrapHostAddress. The value is 0.0.0.0 if not available or not applicable.
1.3.6.1.4.1.7262.2.5.2.6.2.1.2IpAddressread-onlydeprecated
hzCpSnmpV3TrapHostUserNameDep
OBJECT-TYPE
The user name of the v3 trap host.
1.3.6.1.4.1.7262.2.5.2.6.2.1.3DisplayString (SIZE(0..24))read-onlydeprecated
hzCpSnmpV3TrapHostAuthProtocolDep
OBJECT-TYPE
The authentication alogorithm used by the v3 trap host.
1.3.6.1.4.1.7262.2.5.2.6.2.1.4INTEGER {noAuth(1), md5(2), sha(3)}read-onlydeprecated
hzCpSnmpV3TrapHostAuthPasswordDep
OBJECT-TYPE
The authentication password of the v3 trap host.
1.3.6.1.4.1.7262.2.5.2.6.2.1.5DisplayString (SIZE(0..24))read-onlydeprecated
hzCpSnmpV3TrapHostPrivProtocolDep
OBJECT-TYPE
The privacy encryption alogorithm used by the v3 trap host.
1.3.6.1.4.1.7262.2.5.2.6.2.1.6INTEGER {noPriv(1), des(2)}read-onlydeprecated
hzCpSnmpV3TrapHostPrivPasswordDep
OBJECT-TYPE
The privacy password of the v3 trap host.
1.3.6.1.4.1.7262.2.5.2.6.2.1.7DisplayString (SIZE(0..24))read-onlydeprecated
hzCpSnmpV3TrapHostActivatedDep
OBJECT-TYPE
Specifies whether a specific v3 trap host is allowed to access the system
1.3.6.1.4.1.7262.2.5.2.6.2.1.8INTEGER {notActive(1), active(2)}read-onlydeprecated
hzCpTrapEnable
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.2.6.3
hzCpColdStartTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not.
1.3.6.1.4.1.7262.2.5.2.6.3.1INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpLinkDownTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not.
1.3.6.1.4.1.7262.2.5.2.6.3.2INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpPeerAuthenticationFailureTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not.
1.3.6.1.4.1.7262.2.5.2.6.3.3INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpHitlessAamConfigMismatchTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.4INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpHitlessAamModulationLoweredTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.5INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpHitlessAamModulationChangedEventTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.6INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpAtpcConfigMismatchTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.7INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpAtpcAutoDisabledTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.8INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpNoSntpServersReachableTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.9INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpFrequencyFileInvalidTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.10INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpAggregateDroppedFramesThresholdTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.11INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpQueueDroppedFramesThresholdTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.12INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpBwUtilizationThresholdTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.13INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpQueueDepthThresholdTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.14INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpRlsConfigMismatchTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.15INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpRlsShutdownActivatedTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.16INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpRlsQueueBasedShutdownActivatedTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.17INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpModemRxLossOfSignalLockTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not.
1.3.6.1.4.1.7262.2.5.2.6.3.18INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpModemSnrBelowThresholdTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not.
1.3.6.1.4.1.7262.2.5.2.6.3.19INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpModemEqualizerStressThresholdTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not.
1.3.6.1.4.1.7262.2.5.2.6.3.20INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpRslBelowThresholdTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.21INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpRadioSynthLostLockTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not.
1.3.6.1.4.1.7262.2.5.2.6.3.22INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpRadioCalTableNotAvailableTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.23INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpRadioDrainCurrentOutOfLimitTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.24INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpRadioPowerAmplifierTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.25INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpTemperatureOutOfLimitTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.26INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpRedundancyConfigMismatchTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.27INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpRedundancyActiveOnSecondaryTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.28INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpRedundancyOperatingInForcedSwitchTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.29INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpRedundancyEnetCrossLinkTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.30INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpRedundancyActiveUsingPartnerWLinkTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.31INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpRedundancyStandbyWLinkInUseTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.32INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpRedundancyStandbyOnPrimaryTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.33INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpX2DeliveringHalfCapacityTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.34INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpBncCableSignalNotDetectedTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.35INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpEthernetSpeedReducedTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.36INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpSynceLostLockTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.37INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpSynceSecondarySourceInUseTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.38INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpUserSessionTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not.
1.3.6.1.4.1.7262.2.5.2.6.3.39INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpInvalidSystemConfigTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.40INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpMibChangeNotSavedTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.41INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpTransmitterLossOfSyncTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.42INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpRadioLinearityCalErrorTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.43INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpSynceConfigMismatchTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.44INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpCryptoPowerUpTestsFailedTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.45INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpCryptoConfigMismatchTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.46INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpSystemTimeChangeTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not
1.3.6.1.4.1.7262.2.5.2.6.3.47INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpCodeCheckTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not.
1.3.6.1.4.1.7262.2.5.2.6.3.48INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpConfigChangedTrap
OBJECT-TYPE
Specifies whether this trap is to be sent or not.
1.3.6.1.4.1.7262.2.5.2.6.3.49INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpSnmpTrapHostTable
OBJECT-TYPE
Table containing SNMP trap host entries.
1.3.6.1.4.1.7262.2.5.2.6.4not-accessiblecurrent
hzCpSnmpTrapHostEntry
OBJECT-TYPE
The snmp trap host entry containing all the trap host information
1.3.6.1.4.1.7262.2.5.2.6.4.1not-accessiblecurrent
hzCpSnmpTrapHostIndex
OBJECT-TYPE
A unique value for each trap host.
1.3.6.1.4.1.7262.2.5.2.6.4.1.1Integer32read-onlycurrent
hzCpSnmpTrapHostDomain
OBJECT-TYPE
Indicates snmp trap host inet address type. Valid types are ipv4 or ipv6.
1.3.6.1.4.1.7262.2.5.2.6.4.1.2InetAddressTyperead-writecurrent
hzCpSnmpTrapHostAddress
OBJECT-TYPE
Indicates snmp trap host inet address octet string. This object deprecates hzCpSnmpTrapHostIpAddressDep.
1.3.6.1.4.1.7262.2.5.2.6.4.1.3InetAddressread-writecurrent
hzCpSnmpTrapHostCommunityName
OBJECT-TYPE
The community string name used in Traps.
1.3.6.1.4.1.7262.2.5.2.6.4.1.4DisplayString (SIZE(0..32))read-writecurrent
hzCpSnmpTrapHostActivated
OBJECT-TYPE
Specifies whether traps are to be sent to this specific host or not. This object deprecates hzCpSnmpTrapHostActivatedDep.
1.3.6.1.4.1.7262.2.5.2.6.4.1.32INTEGER {notActive(1), active(2)}read-writecurrent
hzCpSnmpV3TrapHostsTable
OBJECT-TYPE
Table containing snmp V3 trap host entries
1.3.6.1.4.1.7262.2.5.2.6.5not-accessiblecurrent
hzCpSnmpV3TrapHostsEntry
OBJECT-TYPE
Contains the snmp v3 trap host information
1.3.6.1.4.1.7262.2.5.2.6.5.1not-accessiblecurrent
hzCpSnmpV3TrapHostsIndex
OBJECT-TYPE
A unique value for each v3 trap host.
1.3.6.1.4.1.7262.2.5.2.6.5.1.1Integer32 (0..4)read-onlycurrent
hzCpSnmpV3TrapHostDomain
OBJECT-TYPE
Indicates v3 trap host inet address type. Valid types are ipv4 or ipv6.
1.3.6.1.4.1.7262.2.5.2.6.5.1.2InetAddressTyperead-writecurrent
hzCpSnmpV3TrapHostAddress
OBJECT-TYPE
Indicates snmp v3 trap host inet address octet string. This object deprecates hzCpSnmpV3TrapHostIpAddressDep.
1.3.6.1.4.1.7262.2.5.2.6.5.1.3InetAddressread-writecurrent
hzCpSnmpV3TrapHostUserName
OBJECT-TYPE
The user name of the v3 trap host.
1.3.6.1.4.1.7262.2.5.2.6.5.1.4DisplayString (SIZE(0..32))read-writecurrent
hzCpSnmpV3TrapHostAuthProtocol
OBJECT-TYPE
The authentication alogorithm used by the v3 trap host.
1.3.6.1.4.1.7262.2.5.2.6.5.1.5INTEGER {noAuth(1), md5(2), sha(3)}read-writecurrent
hzCpSnmpV3TrapHostAuthPassword
OBJECT-TYPE
The authentication password of the v3 trap host.
1.3.6.1.4.1.7262.2.5.2.6.5.1.6DisplayString (SIZE(0..32))read-writecurrent
hzCpSnmpV3TrapHostPrivProtocol
OBJECT-TYPE
The privacy encryption alogorithm used by the v3 trap host.
1.3.6.1.4.1.7262.2.5.2.6.5.1.7INTEGER {noPriv(1), des(2)}read-writecurrent
hzCpSnmpV3TrapHostPrivPassword
OBJECT-TYPE
The privacy password of the v3 trap host.
1.3.6.1.4.1.7262.2.5.2.6.5.1.8DisplayString (SIZE(0..32))read-writecurrent
hzCpSnmpV3TrapHostActivated
OBJECT-TYPE
Specifies whether v3 traps are to be sent to this specific host or not. This object deprecates hzCpSnmpV3TrapHostActivatedDep.
1.3.6.1.4.1.7262.2.5.2.6.5.1.32INTEGER {notActive(1), active(2)}read-writecurrent
hzCpRadius
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.2.7
hzCpRadiusSuperUserAuthentication
OBJECT-TYPE
If strict mode is off, the super user can login when radius is turned off or unreachable.
1.3.6.1.4.1.7262.2.5.2.7.1INTEGER {off(1), on(2)}read-writecurrent
hzCpRadiusServerTimeOut
OBJECT-TYPE
Timeout period for authentication requests
1.3.6.1.4.1.7262.2.5.2.7.2Integer32read-onlycurrent
hzCpRadiusServerDeadTime
OBJECT-TYPE
Time to declare an unresponsive server 'dead'
1.3.6.1.4.1.7262.2.5.2.7.3Integer32read-onlycurrent
hzCpRadiusServerReTransmit
OBJECT-TYPE
Maximum number of retransmits to an unresponsive server
1.3.6.1.4.1.7262.2.5.2.7.4Integer32read-onlycurrent
hzCpRadiusServerDepTable
OBJECT-TYPE
Table containing radius server entries
1.3.6.1.4.1.7262.2.5.2.7.5not-accessibledeprecated
hzCpRadiusServerDepEntry
OBJECT-TYPE
Contains the SNTP server information
1.3.6.1.4.1.7262.2.5.2.7.5.1not-accessibledeprecated
hzCpRadiusServerIndexDep
OBJECT-TYPE
A unique value for each radius server.
1.3.6.1.4.1.7262.2.5.2.7.5.1.1Integer32read-onlydeprecated
hzCpRadiusCfgdHostIpAddressDep
OBJECT-TYPE
The IP address of the configured radius server. This object is deprecated by hzCpRadiusCfgdHostAddress. The value is 0.0.0.0 if not available or not applicable.
1.3.6.1.4.1.7262.2.5.2.7.5.1.2IpAddressread-onlydeprecated
hzCpRadiusCfgdHostKeyDep
OBJECT-TYPE
The key of the configured radius server.
1.3.6.1.4.1.7262.2.5.2.7.5.1.3DisplayStringread-onlydeprecated
hzCpRadiusServerTable
OBJECT-TYPE
Table containing radius server entries
1.3.6.1.4.1.7262.2.5.2.7.6not-accessiblecurrent
hzCpRadiusServerEntry
OBJECT-TYPE
Contains the SNTP server information
1.3.6.1.4.1.7262.2.5.2.7.6.1not-accessiblecurrent
hzCpRadiusServerIndex
OBJECT-TYPE
A unique value for each radius server.
1.3.6.1.4.1.7262.2.5.2.7.6.1.1Integer32read-onlycurrent
hzCpRadiusCfgdHostDomain
OBJECT-TYPE
Indicates configured radius radius inet address type. Valid types are ipv4 or ipv6.
1.3.6.1.4.1.7262.2.5.2.7.6.1.2InetAddressTyperead-writecurrent
hzCpRadiusCfgdHostAddress
OBJECT-TYPE
Indicates configured radius server inet address octet string. This object deprecates hzCpRadiusCfgdHostIpAddressDep.
1.3.6.1.4.1.7262.2.5.2.7.6.1.3InetAddressread-writecurrent
hzCpRadiusCfgdHostKey
OBJECT-TYPE
The key of the configured radius server.
1.3.6.1.4.1.7262.2.5.2.7.6.1.4DisplayString (SIZE(0..32))read-writecurrent
hzCpManagementSessions
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.2.8
hzCpUserSessionUserTable
OBJECT-TYPE
A table of user sessions
1.3.6.1.4.1.7262.2.5.2.8.1not-accessiblecurrent
hzCpUserSessionUserEntry
OBJECT-TYPE
User session entry
1.3.6.1.4.1.7262.2.5.2.8.1.1not-accessiblecurrent
hzCpUserSessionUserIndex
OBJECT-TYPE
A unique value for each user.
1.3.6.1.4.1.7262.2.5.2.8.1.1.1INTEGER {user1(1), user2(2), user3(3), user4(4), user5(5), user6(6), user7(7), user8(8), user9(9), user10(10), user11(11), user12(12), user13(13), user14(14), user15(15), user16(16), user17(17), user18(18), user19(19), user20(20)}read-onlycurrent
hzCpUserSessionUserName
OBJECT-TYPE
The username of a management session using Telnet or HTTP. The session state variable must be checked to determine if the management session is currently in progress.
1.3.6.1.4.1.7262.2.5.2.8.1.1.2DisplayString (SIZE(0..32))read-onlycurrent
hzCpUserSessionUserConnectionType
OBJECT-TYPE
Either telnet, ssh, http or https. Ethernet connection may be through any physical port(s) dedicated to management of the equipment.
1.3.6.1.4.1.7262.2.5.2.8.1.1.3DisplayStringread-onlycurrent
hzCpUserSessionUserState
OBJECT-TYPE
The state of the session. The session is inProgress if the user is currently logged into the system. The session is terminated if the user has logged out of the system.
1.3.6.1.4.1.7262.2.5.2.8.1.1.4INTEGER {informationNotAvailable(1), sessionTerminated(2), sessionInProgress(3)}read-onlycurrent
hzCpHttp
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.2.9
hzCpHttpEnable
OBJECT-TYPE
Indicates whether HTTP is enabled.
1.3.6.1.4.1.7262.2.5.2.9.1INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpHttpSecure
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.2.9.2
hzCpHttpSecureCertificateStatus
OBJECT-TYPE
Returns the HTTPS certificate status
1.3.6.1.4.1.7262.2.5.2.9.2.1DisplayString (SIZE(0..100))read-onlycurrent
hzCpHttpSecureAccessForAdminUsers
OBJECT-TYPE
the HTTPS access requirement for Admin user group.
1.3.6.1.4.1.7262.2.5.2.9.2.2INTEGER {off(1), on(2)}read-writecurrent
hzCpHttpSecureAccessForNocUsers
OBJECT-TYPE
the HTTPS access requirement for Noc user group.
1.3.6.1.4.1.7262.2.5.2.9.2.3INTEGER {off(1), on(2)}read-writecurrent
hzCpHttpSecureAccessForSuperUsers
OBJECT-TYPE
the HTTPS access requirement for Super user group.
1.3.6.1.4.1.7262.2.5.2.9.2.4INTEGER {off(1), on(2)}read-writecurrent
hzCpNetworkInterface
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.3
hzCpEnetPort
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.3.1
hzCpEnetPortConfigTable
OBJECT-TYPE
A table for enet port configuration
1.3.6.1.4.1.7262.2.5.3.1.1not-accessiblecurrent
hzCpEnetPortConfigEntry
OBJECT-TYPE
An entry for enet port configuration
1.3.6.1.4.1.7262.2.5.3.1.1.1not-accessiblecurrent
hzCpEnetPortIndex
OBJECT-TYPE
A unique value for each enet port.
1.3.6.1.4.1.7262.2.5.3.1.1.1.1INTEGER {enet-port-1(1), enet-port-2(2), enet-port-3(3), enet-port-4(4)}read-onlycurrent
hzCpEnetPortName
OBJECT-TYPE
Describes the port interface name
1.3.6.1.4.1.7262.2.5.3.1.1.1.2DisplayStringread-onlycurrent
hzCpEnetPortAutoNegotiation
OBJECT-TYPE
Turns auto-negotiation on or off for Ethernet Port. Turning off results in the interface defaulting to 100BaseT, Full Duplex.
1.3.6.1.4.1.7262.2.5.3.1.1.1.3INTEGER {on(1), off(2)}read-writecurrent
hzCpEnetPortSpeed
OBJECT-TYPE
Configure the port interface speed .
1.3.6.1.4.1.7262.2.5.3.1.1.1.4INTEGER {x10M(1), x100M(2), x1000M(3), auto(4)}read-writecurrent
hzCpEnetPortDuplex
OBJECT-TYPE
Configure the port interface duplex.
1.3.6.1.4.1.7262.2.5.3.1.1.1.5INTEGER {full(1), half(2), auto(3)}read-onlycurrent
hzCpEnetPortMedia
OBJECT-TYPE
Configure the port interface media type.
1.3.6.1.4.1.7262.2.5.3.1.1.1.6INTEGER {copper(1), fiber(2), auto(3)}read-writecurrent
hzCpEnetPortAdminState
OBJECT-TYPE
Enable or disable the admin status of the port.
1.3.6.1.4.1.7262.2.5.3.1.1.1.7INTEGER {on(1), off(2)}read-writecurrent
hzCpEnetPortPauseFrame
OBJECT-TYPE
When PAUSE is enabled, port pause frames can be generated by the system and the pause frames will flow toward the link partner on the network. When PAUSE is not enabled, no pause frames will be generated by the system.
1.3.6.1.4.1.7262.2.5.3.1.1.1.8INTEGER {on(1), off(2)}read-writecurrent
hzCpEnetPortMaxFrameSize
OBJECT-TYPE
For port the default maximum frame size is 1600 bytes. The settable maximum frame size must be a multiple of 128. If the chosen maximum frame size is not a multiple of 128, its closest number which is a multiple of 128 is actually used. The settable lowest maximum frame size is 1664, and the settable highest maximum frame size is 9600. If the chosen maximum frame size is out of this range, the default maximum frame size of 1600 is used.
1.3.6.1.4.1.7262.2.5.3.1.1.1.9Integer32 (1600..9600)read-writecurrent
hzCpEnetPortOpticalTransceiverState
OBJECT-TYPE
When it is on, optical transmitter for port1 is enabled. Otherwise optical transmitter is disabled. This option is valid for port1 only if media type is configured as fiber.
1.3.6.1.4.1.7262.2.5.3.1.1.1.10INTEGER {off(1), on(2)}read-writecurrent
hzCpEnetPortState
OBJECT-TYPE
Enables or disables enet-port3 or enet-port4.
1.3.6.1.4.1.7262.2.5.3.1.1.1.11INTEGER {disable(1), enable(2)}read-writecurrent
hzCpEnetPayloadState
OBJECT-TYPE
Enables or disables payload on a specific port. If payload state is disabled for that port, it's considered as purely management.
1.3.6.1.4.1.7262.2.5.3.1.1.1.12INTEGER {disable(1), enable(2)}read-writecurrent
hzCpEnetPortStatusTable
OBJECT-TYPE
A table for enet port status
1.3.6.1.4.1.7262.2.5.3.1.2not-accessiblecurrent
hzCpEnetPortStatusEntry
OBJECT-TYPE
An entry for enet port status
1.3.6.1.4.1.7262.2.5.3.1.2.1not-accessiblecurrent
hzCpEnetPortStatusIndex
OBJECT-TYPE
A unique value for each enet port.
1.3.6.1.4.1.7262.2.5.3.1.2.1.1INTEGER {enet-port-1(1), enet-port-2(2), enet-port-3(3), enet-port-4(4)}read-onlycurrent
hzCpEnetPortLinkStatus
OBJECT-TYPE
Indicates the port link status.
1.3.6.1.4.1.7262.2.5.3.1.2.1.2INTEGER {down(1), up(2), invalid(3)}read-onlycurrent
hzCpEnetPortAutoNegotiationStatus
OBJECT-TYPE
Indicates the port AutoNegotiation status.
1.3.6.1.4.1.7262.2.5.3.1.2.1.3INTEGER {on(1), off(2), invalid(3)}read-onlycurrent
hzCpEnetPortSpeedStatus
OBJECT-TYPE
Indicates the port interface speed status.
1.3.6.1.4.1.7262.2.5.3.1.2.1.4INTEGER {x10M(1), x100M(2), x1000M(3), auto(4), invalid(5)}read-onlycurrent
hzCpEnetPortDuplexStatus
OBJECT-TYPE
Indicates the port interface duplex status.
1.3.6.1.4.1.7262.2.5.3.1.2.1.5INTEGER {full(1), half(2), auto(3), invalid(4)}read-onlycurrent
hzCpEnetPortMediaStatus
OBJECT-TYPE
Indicates the port interface media status.
1.3.6.1.4.1.7262.2.5.3.1.2.1.6INTEGER {copper(1), fiber(2), auto(3), invalid(4)}read-onlycurrent
hzCpEnetPortStatsTable
OBJECT-TYPE
A table for enet port stats
1.3.6.1.4.1.7262.2.5.3.1.3not-accessiblecurrent
hzCpEnetPortStatsEntry
OBJECT-TYPE
An entry for enet port stats
1.3.6.1.4.1.7262.2.5.3.1.3.1not-accessiblecurrent
hzCpEnetPortStatsIndex
OBJECT-TYPE
A unique value for each enet port.
1.3.6.1.4.1.7262.2.5.3.1.3.1.1INTEGER {enet-port-1(1), enet-port-2(2), enet-port-3(3), enet-port-4(4)}read-onlycurrent
hzCpEnetPortTxFrames
OBJECT-TYPE
The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
1.3.6.1.4.1.7262.2.5.3.1.3.1.2Counter64read-onlycurrent
hzCpEnetPortTxBytes
OBJECT-TYPE
The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.
1.3.6.1.4.1.7262.2.5.3.1.3.1.3Counter64read-onlycurrent
hzCpEnetPortRxFramesOk
OBJECT-TYPE
The total number of bytes received on the interface, including framing characters.
1.3.6.1.4.1.7262.2.5.3.1.3.1.4Counter64read-onlycurrent
hzCpEnetPortRxBytesOk
OBJECT-TYPE
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
1.3.6.1.4.1.7262.2.5.3.1.3.1.5Counter64read-onlycurrent
hzCpEnetPortRxFramesLengthErrors
OBJECT-TYPE
The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
1.3.6.1.4.1.7262.2.5.3.1.3.1.6Counter64read-onlycurrent
hzCpEnetPortRxFramesCrcErrors
OBJECT-TYPE
The number of packets received via the interface which were discarded because of rx frames CRC errors.
1.3.6.1.4.1.7262.2.5.3.1.3.1.7Counter64read-onlycurrent
hzCpEnetPortRxDiscarded
OBJECT-TYPE
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
1.3.6.1.4.1.7262.2.5.3.1.3.1.8Counter64read-onlycurrent
hzCpEnetAggregatedStats
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.3.1.4
hzCpEnetAggTxFrames
OBJECT-TYPE
The current count of aggregated port egress frames.
1.3.6.1.4.1.7262.2.5.3.1.4.1Counter64read-onlycurrent
hzCpEnetAggTxBytes
OBJECT-TYPE
The current count of aggregated port egress bytes.
1.3.6.1.4.1.7262.2.5.3.1.4.2Counter64read-onlycurrent
hzCpEnetAggRxFramesOK
OBJECT-TYPE
The current count of aggregated port ingress frames.
1.3.6.1.4.1.7262.2.5.3.1.4.3Counter64read-onlycurrent
hzCpEnetAggRxBytesOK
OBJECT-TYPE
The current count of aggregated port ingress bytes.
1.3.6.1.4.1.7262.2.5.3.1.4.4Counter64read-onlycurrent
hzCpEnetAggRxFramesLengthError
OBJECT-TYPE
The current count of aggregated frames received that were discarded due to length error.
1.3.6.1.4.1.7262.2.5.3.1.4.5Counter64read-onlycurrent
hzCpEnetAggPortRxFramesCrcError
OBJECT-TYPE
The current count of aggregated frames received that were discarded due to CRC error.
1.3.6.1.4.1.7262.2.5.3.1.4.6Counter64read-onlycurrent
hzCpEnetAggPortRxFramesDrops
OBJECT-TYPE
The current count of aggregated frames received that were discarded due to an error.
1.3.6.1.4.1.7262.2.5.3.1.4.7Counter64read-onlycurrent
hzCpEnetAggBWUtilization
OBJECT-TYPE
The carried load over link capacity for port.
1.3.6.1.4.1.7262.2.5.3.1.4.8Integer32read-onlycurrent
hzCpEnetAggIngressDataRate
OBJECT-TYPE
The data rate coming into the ethernet for port. The data rate you see is multiplied by 100. e.g. A display of 1530 is actually 15.30 Mpbs
1.3.6.1.4.1.7262.2.5.3.1.4.9Integer32read-onlycurrent
hzCpEnetAggEgressDataRate
OBJECT-TYPE
The data rate going out of the ethernet for port. The data rate you see is multiplied by 100. e.g. A display of 1530 is actually 15.30 Mpbs.
1.3.6.1.4.1.7262.2.5.3.1.4.10Integer32read-onlycurrent
hzCpEnetAggFramesInQueueTable
OBJECT-TYPE
A table of enet aggregate frames.
1.3.6.1.4.1.7262.2.5.3.1.4.11not-accessiblecurrent
hzCpEnetAggFramesInQueueEntry
OBJECT-TYPE
An entry of enet aggregate frames.
1.3.6.1.4.1.7262.2.5.3.1.4.11.1not-accessiblecurrent
hzCpEnetAggFramesInQueueIndex
OBJECT-TYPE
A unique value for each of the 8 queues.
1.3.6.1.4.1.7262.2.5.3.1.4.11.1.1INTEGER {q1(1), q2(2), q3(3), q4(4), q5(5), q6(6), q7(7), q8(8)}read-onlycurrent
hzCpEnetAggFramesInQueue
OBJECT-TYPE
The current count of frames in queues.
1.3.6.1.4.1.7262.2.5.3.1.4.11.1.2Counter64read-onlycurrent
hzCpEnetAggFramesInQueueDiscarded
OBJECT-TYPE
The current count of frames received in queues that were discarded due to an error. One possible reason is lack of buffer space.
1.3.6.1.4.1.7262.2.5.3.1.4.11.1.3Counter64read-onlycurrent
hzCpEnetPortLcStatsTable
OBJECT-TYPE
A table for enet port stats
1.3.6.1.4.1.7262.2.5.3.1.5not-accessiblecurrent
hzCpEnetPortLcStatsEntry
OBJECT-TYPE
An entry for enet port stats
1.3.6.1.4.1.7262.2.5.3.1.5.1not-accessiblecurrent
hzCpEnetPortLcStatsIndex
OBJECT-TYPE
A unique value for each enet port.
1.3.6.1.4.1.7262.2.5.3.1.5.1.1INTEGER {enet-port-1(1), enet-port-2(2), enet-port-3(3), enet-port-4(4)}read-onlycurrent
hzCpEnetPortLcTxFrames
OBJECT-TYPE
A low capacity 32-bit counter representing total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
1.3.6.1.4.1.7262.2.5.3.1.5.1.2Counter32read-onlycurrent
hzCpEnetPortLcTxBytes
OBJECT-TYPE
A low capacity 32-bit counter representing total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.
1.3.6.1.4.1.7262.2.5.3.1.5.1.3Counter32read-onlycurrent
hzCpEnetPortLcRxFramesOk
OBJECT-TYPE
A low capacity 32-bit counter representing total number of bytes received on the interface, including framing characters.
1.3.6.1.4.1.7262.2.5.3.1.5.1.4Counter32read-onlycurrent
hzCpEnetPortLcRxBytesOk
OBJECT-TYPE
A low capacity 32-bit counter representing the number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
1.3.6.1.4.1.7262.2.5.3.1.5.1.5Counter32read-onlycurrent
hzCpEnetPortLcRxFramesLengthErrors
OBJECT-TYPE
A low capacity 32-bit counter representing the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
1.3.6.1.4.1.7262.2.5.3.1.5.1.6Counter32read-onlycurrent
hzCpEnetPortLcRxFramesCrcErrors
OBJECT-TYPE
A low capacity 32-bit counter representing the number of packets received via the interface which were discarded because of rx frames CRC errors.
1.3.6.1.4.1.7262.2.5.3.1.5.1.7Counter32read-onlycurrent
hzCpEnetPortLcRxDiscarded
OBJECT-TYPE
A low capacity 32-bit counter representing the number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
1.3.6.1.4.1.7262.2.5.3.1.5.1.8Counter32read-onlycurrent
hzCpEnetAggregatedLcStats
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.3.1.6
hzCpEnetAggLcTxFrames
OBJECT-TYPE
A low capacity 32-bit counter representing the current count of aggregated port egress frames.
1.3.6.1.4.1.7262.2.5.3.1.6.1Counter32read-onlycurrent
hzCpEnetAggLcTxBytes
OBJECT-TYPE
A low capacity 32-bit counter representing the current count of aggregated port egress bytes.
1.3.6.1.4.1.7262.2.5.3.1.6.2Counter32read-onlycurrent
hzCpEnetAggLcRxFramesOK
OBJECT-TYPE
A low capacity 32-bit counter representing the current count of aggregated port ingress frames.
1.3.6.1.4.1.7262.2.5.3.1.6.3Counter32read-onlycurrent
hzCpEnetAggLcRxBytesOK
OBJECT-TYPE
A low capacity 32-bit counter representing the current count of aggregated port ingress bytes.
1.3.6.1.4.1.7262.2.5.3.1.6.4Counter32read-onlycurrent
hzCpEnetAggLcRxFramesLengthError
OBJECT-TYPE
A low capacity 32-bit counter representing the current count of aggregated frames received that were discarded due to length error.
1.3.6.1.4.1.7262.2.5.3.1.6.5Counter32read-onlycurrent
hzCpEnetAggLcRxFramesCrcError
OBJECT-TYPE
A low capacity 32-bit counter representing the current count of aggregated frames received that were discarded due to CRC error.
1.3.6.1.4.1.7262.2.5.3.1.6.6Counter32read-onlycurrent
hzCpEnetAggLcRxFramesDrops
OBJECT-TYPE
A low capacity 32-bit counter representing the current count of aggregated frames received that were discarded due to an error.
1.3.6.1.4.1.7262.2.5.3.1.6.7Counter32read-onlycurrent
hzCpEnetAggLcBWUtilization
OBJECT-TYPE
A low capacity 32-bit counter representing the carried load over link capacity for port.
1.3.6.1.4.1.7262.2.5.3.1.6.8Integer32read-onlycurrent
hzCpEnetAggLcIngressDataRate
OBJECT-TYPE
A low capacity 32-bit counter representing the data rate coming into the ethernet for port. The data rate you see is multiplied by 100. e.g. A display of 1530 is actually 15.30 Mpbs
1.3.6.1.4.1.7262.2.5.3.1.6.9Integer32read-onlycurrent
hzCpEnetAggLcEgressDataRate
OBJECT-TYPE
A low capacity 32-bit counter representing the data rate going out of the ethernet for port. The data rate you see is multiplied by 100. e.g. A display of 1530 is actually 15.30 Mpbs.
1.3.6.1.4.1.7262.2.5.3.1.6.10Integer32read-onlycurrent
hzCpEnetAggLcFramesInQueueTable
OBJECT-TYPE
A table of enet aggregate frames.
1.3.6.1.4.1.7262.2.5.3.1.6.11not-accessiblecurrent
hzCpEnetAggLcFramesInQueueEntry
OBJECT-TYPE
An entry of enet aggregate frames.
1.3.6.1.4.1.7262.2.5.3.1.6.11.1not-accessiblecurrent
hzCpEnetAggLcFramesInQueueIndex
OBJECT-TYPE
A unique value for each of the 8 queues.
1.3.6.1.4.1.7262.2.5.3.1.6.11.1.1INTEGER {q1(1), q2(2), q3(3), q4(4), q5(5), q6(6), q7(7), q8(8)}read-onlycurrent
hzCpEnetAggLcFramesInQueue
OBJECT-TYPE
A low capacity 32-bit counter representing the current count of frames in queues.
1.3.6.1.4.1.7262.2.5.3.1.6.11.1.2Counter32read-onlycurrent
hzCpEnetAggLcFramesInQueueDiscarded
OBJECT-TYPE
A low capacity 32-bit counter representing the current count of frames received in queues that were discarded due to an error. One possible reason is lack of buffer space.
1.3.6.1.4.1.7262.2.5.3.1.6.11.1.3Counter32read-onlycurrent
hzCpEnetPortVlanTable
OBJECT-TYPE
A table of enet port vlan setting.
1.3.6.1.4.1.7262.2.5.3.1.7not-accessiblecurrent
hzCpEnetPortVlanEntry
OBJECT-TYPE
An entry of enet port vlan setting.
1.3.6.1.4.1.7262.2.5.3.1.7.1not-accessiblecurrent
hzCpEnetPortVlanIndex
OBJECT-TYPE
A unique name identifying each enet port.
1.3.6.1.4.1.7262.2.5.3.1.7.1.1INTEGER {enet-port-1(1), enet-port-2(2), enet-port-3(3), enet-port-4(4)}read-onlycurrent
hzCpEnetPortDefaultVlanId
OBJECT-TYPE
Indicates default VLAN Tag Id (1...4095) per port.
1.3.6.1.4.1.7262.2.5.3.1.7.1.2Integer32read-writecurrent
hzCpEnetPortDefaultVlanPriority
OBJECT-TYPE
Indicated default VLAN tagging priority (0...7) per port.
1.3.6.1.4.1.7262.2.5.3.1.7.1.3Integer32read-writecurrent
hzCpWirelessInterface
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.4
hzCpWirelessInterfaceNames
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.4.1
hzCpWirelessInterfaceNameTable
OBJECT-TYPE
A table of Wireless Interface Modems
1.3.6.1.4.1.7262.2.5.4.1.1not-accessiblecurrent
hzCpWirelessInterfaceNameEntry
OBJECT-TYPE
An entry of Wireless Interface Modem
1.3.6.1.4.1.7262.2.5.4.1.1.1not-accessiblecurrent
hzCpWirelessInterfaceNameIndex
OBJECT-TYPE
A unique value for each Wireless Interface.
1.3.6.1.4.1.7262.2.5.4.1.1.1.1INTEGER {wireless-port-1(1), wireless-port-2(2)}read-onlycurrent
hzCpWirelessInterfaceName
OBJECT-TYPE
Describes the functionality of the Wireless Interface.
1.3.6.1.4.1.7262.2.5.4.1.1.1.2DisplayStringread-onlycurrent
hzCpWirelessInterfaceModems
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.4.2
hzCpModemTable
OBJECT-TYPE
A table of Wireless Interface Modems
1.3.6.1.4.1.7262.2.5.4.2.1not-accessiblecurrent
hzCpModemEntry
OBJECT-TYPE
An entry of Wireless Interface Modem
1.3.6.1.4.1.7262.2.5.4.2.1.1not-accessiblecurrent
hzCpModemIndex
OBJECT-TYPE
A unique value for each interface.
1.3.6.1.4.1.7262.2.5.4.2.1.1.1INTEGER {wireless-port-1(1)}read-onlycurrent
hzCpModemOperStatus
OBJECT-TYPE
The current operational state of the interface. Testing indicates that no operational packets can be passed.
1.3.6.1.4.1.7262.2.5.4.2.1.1.2INTEGER {up(1), down(2), testing(3)}read-onlycurrent
hzCpModemChannelizedRSL
OBJECT-TYPE
An estimate of the modem's channelized RSL. Divide the value by 10 to get the actual RSL value. Once this number is divided by 10 the units are dBm. For example -352 is actually -35.2dBm
1.3.6.1.4.1.7262.2.5.4.2.1.1.3Integer32read-onlycurrent
hzCpModemChannelizedRSLUnsignedInt
OBJECT-TYPE
The absolute value of the estimate of the modem's channelized RSL. Divide the value by 10 to get the actual RSL value. Once this number is divided by 10 the units are dBm. For example -352 is actually 35.2dBm
1.3.6.1.4.1.7262.2.5.4.2.1.1.4Integer32read-onlycurrent
hzCpModemModulationType
OBJECT-TYPE
The modulation type of the modem, distinguished according to the physical/link protocol.
1.3.6.1.4.1.7262.2.5.4.2.1.1.5INTEGER {qpsk(1), qam16(2), qam32(3), qam64(4), qam128(5), qam256(6), qam512(7), qam1024(8), qam2048(9)}read-onlycurrent
hzCpModemRxSpeed
OBJECT-TYPE
An estimate of the modem's current Rx bandwidth in bits per second. Divide the value by 10000 to get the actual data rate in Mbps
1.3.6.1.4.1.7262.2.5.4.2.1.1.6Integer32read-onlycurrent
hzCpModemTxSpeed
OBJECT-TYPE
An estimate of the modem's current Tx bandwidth in bits per second. Divide the value by 10000 to get the actual data rate in Mbps
1.3.6.1.4.1.7262.2.5.4.2.1.1.7Integer32read-onlycurrent
hzCpModemSNR
OBJECT-TYPE
SNR value in dB. Divide the value by 10 to get the actual SNR.
1.3.6.1.4.1.7262.2.5.4.2.1.1.8Integer32read-onlycurrent
hzCpModemEbToNoiseRatio
OBJECT-TYPE
The ratio of the modem Estimated Energy per information bit to Noise power spectral density. Divide the value by 10 to get the actual EbToNoiseRatio
1.3.6.1.4.1.7262.2.5.4.2.1.1.9Integer32read-onlycurrent
hzCpModemEqualizerStress
OBJECT-TYPE
Indicates the average magnitude of all the equalizer taps to provide a measure of how hard the equalizer is working.
1.3.6.1.4.1.7262.2.5.4.2.1.1.10Integer32read-onlycurrent
hzCpWirelessPortStatsTable
OBJECT-TYPE
A table of Wireless Interface Modem Statistics
1.3.6.1.4.1.7262.2.5.4.2.2not-accessiblecurrent
hzCpWirelessPortStatsEntry
OBJECT-TYPE
Statistics for a Wireless Interface Modem
1.3.6.1.4.1.7262.2.5.4.2.2.1not-accessiblecurrent
hzCpWirelessPortStatsIndex
OBJECT-TYPE
A unique value for each interface. Wireless-port-1 contains the local aggregate wireless statistics and wireless-port-2 contains the partner aggregate wireless statistics only in redundancy configuration mode.
1.3.6.1.4.1.7262.2.5.4.2.2.1.1INTEGER {wireless-port-1(1), wireless-port-2(2)}read-onlycurrent
hzCpWirelessPortTxBlocks
OBJECT-TYPE
The current count of Modem blocks transmitted.
1.3.6.1.4.1.7262.2.5.4.2.2.1.2Counter64read-onlycurrent
hzCpWirelessPortRxBlocksOKs
OBJECT-TYPE
The current count of Modem blocks received.
1.3.6.1.4.1.7262.2.5.4.2.2.1.3Counter64read-onlycurrent
hzCpWirelessPortRxBlocksErrors
OBJECT-TYPE
The current count of Modem blocks received in error.
1.3.6.1.4.1.7262.2.5.4.2.2.1.4Counter64read-onlycurrent
hzCpWirelessAggregateStats
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.4.2.3
hzCpWirelessAggTxFrames
OBJECT-TYPE
The current count of Ethernet Combiner frames sent.
1.3.6.1.4.1.7262.2.5.4.2.3.1Counter64read-onlycurrent
hzCpWirelessAggRxFramesOK
OBJECT-TYPE
The current count of good Ethernet Combiner frames received.
1.3.6.1.4.1.7262.2.5.4.2.3.2Counter64read-onlycurrent
hzCpWirelessAggRxFramesErrors
OBJECT-TYPE
The current count of Ethernet Combiner frames received in error.
1.3.6.1.4.1.7262.2.5.4.2.3.3Counter64read-onlycurrent
hzCpWirelessAggRxFramesDiscards
OBJECT-TYPE
The current count of Ethernet Combiner frames in the queue that were discarded.
1.3.6.1.4.1.7262.2.5.4.2.3.4Counter64read-onlycurrent
hzCpWirelessPortLcStatsTable
OBJECT-TYPE
A table of Wireless Interface Modem Statistics
1.3.6.1.4.1.7262.2.5.4.2.4not-accessiblecurrent
hzCpWirelessPortLcStatsEntry
OBJECT-TYPE
Statistics for a Wireless Interface Modem
1.3.6.1.4.1.7262.2.5.4.2.4.1not-accessiblecurrent
hzCpWirelessPortLcStatsIndex
OBJECT-TYPE
A unique value for each interface. Wireless-port-1 contains the local aggregate wireless statistics and wireless-port-2 contains the partner aggregate wireless statistics only in redundancy configuration mode.
1.3.6.1.4.1.7262.2.5.4.2.4.1.1INTEGER {wireless-port-1(1), wireless-port-2(2)}read-onlycurrent
hzCpWirelessPortLcTxBlocks
OBJECT-TYPE
A low capacity 32-bit counter representing the current count of Modem blocks transmitted.
1.3.6.1.4.1.7262.2.5.4.2.4.1.2Counter32read-onlycurrent
hzCpWirelessPortLcRxBlocksOKs
OBJECT-TYPE
A low capacity 32-bit counter representing the current count of Modem blocks received.
1.3.6.1.4.1.7262.2.5.4.2.4.1.3Counter32read-onlycurrent
hzCpWirelessPortLcRxBlocksErrors
OBJECT-TYPE
A low capacity 32-bit counter representing the current count of Modem blocks received in error.
1.3.6.1.4.1.7262.2.5.4.2.4.1.4Counter32read-onlycurrent
hzCpWirelessAggregateLcStats
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.4.2.5
hzCpWirelessAggLcTxFrames
OBJECT-TYPE
A low capacity 32-bit counter representing the current count of Ethernet Combiner frames sent.
1.3.6.1.4.1.7262.2.5.4.2.5.1Counter32read-onlycurrent
hzCpWirelessAggLcRxFramesOK
OBJECT-TYPE
A low capacity 32-bit counter representing the current count of good Ethernet Combiner frames received.
1.3.6.1.4.1.7262.2.5.4.2.5.2Counter32read-onlycurrent
hzCpWirelessAggLcRxFramesErrors
OBJECT-TYPE
A low capacity 32-bit counter representing the current count of Ethernet Combiner frames received in error.
1.3.6.1.4.1.7262.2.5.4.2.5.3Counter32read-onlycurrent
hzCpWirelessAggLcRxFramesDiscards
OBJECT-TYPE
A low capacity 32-bit counter representing the current count of Ethernet Combiner frames in the queue that were discarded.
1.3.6.1.4.1.7262.2.5.4.2.5.4Counter32read-onlycurrent
hzCpWirelessInterfaceRadios
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.4.4
hzCpRadioTable
OBJECT-TYPE
A table of Wireless Interface Radios
1.3.6.1.4.1.7262.2.5.4.4.1not-accessiblecurrent
hzCpRadioEntry
OBJECT-TYPE
An entry of Wireless Interface Radio
1.3.6.1.4.1.7262.2.5.4.4.1.1not-accessiblecurrent
hzCpRadioIndex
OBJECT-TYPE
A unique value for each interface.
1.3.6.1.4.1.7262.2.5.4.4.1.1.1INTEGER {wireless-port-1(1)}read-onlycurrent
hzCpRadioDescription
OBJECT-TYPE
A textual string containing information about the radio. Includes the manufacturer, product name, software version, serial number, and hardware version of the radio.
1.3.6.1.4.1.7262.2.5.4.4.1.1.2DisplayStringread-onlycurrent
hzCpRadioOperStatus
OBJECT-TYPE
The current operational state of the interface. Testing indicates that no operational packets can be passed. Testing also indicates that a firmware upgrade may be in progress
1.3.6.1.4.1.7262.2.5.4.4.1.1.3INTEGER {up(1), down(2), testing(3)}read-onlycurrent
hzCpRadioTxGain
OBJECT-TYPE
The gain of the radio in the transmit chain. Indicates the gain in dB.
1.3.6.1.4.1.7262.2.5.4.4.1.1.4Integer32read-onlycurrent
hzCpRadioRxGain
OBJECT-TYPE
The gain of the radio in the receive chain. Indicates the gain in dB.
1.3.6.1.4.1.7262.2.5.4.4.1.1.5Integer32read-onlycurrent
hzCpRadioReset
OBJECT-TYPE
Writing 1 to this object causes the radio to be reset. All other values are not recognized. This variable always reads back as 0. radioOperStatus should be polled by the user after this object is written to, to verify that the radio card has been reset.
1.3.6.1.4.1.7262.2.5.4.4.1.1.6Integer32read-writecurrent
hzCpRadioTransmitPowerdBm
OBJECT-TYPE
This defines the programmed transmit level of the radio. The power you see is divided by 10. e.g. A display of 133 is actually 13.3 dBm. Notes: - If HAAM is enabled, transmit power cannot be changed. - Programmed and Actual transmit power may differ - see hzCpRadioActualTransmitPower.
1.3.6.1.4.1.7262.2.5.4.4.1.1.7Integer32read-writecurrent
hzCpRadioPowerOption
OBJECT-TYPE
This indicates the power option of the radio: normal or high power.
1.3.6.1.4.1.7262.2.5.4.4.1.1.8INTEGER {normal(1), highPower(2)}read-onlycurrent
hzCpRadioTxState
OBJECT-TYPE
This indicates the power option of the radio: normal or high power.
1.3.6.1.4.1.7262.2.5.4.4.1.1.9INTEGER {off(1), on(2)}read-writecurrent
hzCpRadioActualTxState
OBJECT-TYPE
This defines the actual transmit state of the radio.
1.3.6.1.4.1.7262.2.5.4.4.1.1.10INTEGER {off(1), on(2)}read-onlycurrent
hzCpRadioTemperature
OBJECT-TYPE
The Radio temperature in degree Celsius. The actual temperature is determined by dividing the number by 10. e.g. 202 is actually 20.2 degrees Celsius.
1.3.6.1.4.1.7262.2.5.4.4.1.1.11Integer32read-onlycurrent
hzCpRadioMaxTransmitPowerdBm
OBJECT-TYPE
The maximum Transmit Power allowed.
1.3.6.1.4.1.7262.2.5.4.4.1.1.12Integer32read-onlycurrent
hzCpRadioActualTransmitPowerdBm
OBJECT-TYPE
This defines the actual transmit level of the radio. The power you see is divided by 10. e.g. A display of 133 is actually 13.3 dBm. This value will be undefined: - If the radio is operational and muted. - If the radio is not operational. - If the radio does not have transmit calibration tables programmed into its EEPROM, this transmit power level cannot be used as it is not possible to accurately calculate the actual transmit level. In this case this object will return -99.
1.3.6.1.4.1.7262.2.5.4.4.1.1.13Integer32read-onlycurrent
hzCpWirelessInterfaceRadioFrequencies
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.4.5
hzCpWirelessInterfaceRadio1Frequencies
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.4.5.1
hzCpRadio1FreqGroupSelected
OBJECT-TYPE
The frequency group selected for Radio 1. The frequency subbands are divided into frequency groups txHigh and txLow. A system must have one node configured to txLow and the other node configure to txHigh
1.3.6.1.4.1.7262.2.5.4.5.1.1INTEGER {txLow(1), txHigh(2), none(3)}read-onlycurrent
hzCpRadio1BandTable
OBJECT-TYPE
A table of radio bands for Radio 1. Frequency bands are divided into sub bands. i.e. FCC 23 Ghz Band is comprised of fcc23a, fcc23b, fcc23c and fcc23d which make up the entire FCC23 band
1.3.6.1.4.1.7262.2.5.4.5.1.2not-accessiblecurrent
hzCpRadio1BandEntry
OBJECT-TYPE
A radio band entry containing all the radio band values
1.3.6.1.4.1.7262.2.5.4.5.1.2.1not-accessiblecurrent
hzCpRadio1BandIndex
OBJECT-TYPE
A unique value for each radio band.
1.3.6.1.4.1.7262.2.5.4.5.1.2.1.1Integer32read-onlycurrent
hzCpRadio1BandId
OBJECT-TYPE
radio band ID. Changing this option might require a system reset unless the user has permission to set hzCpApplyFrequencyChangesToSystem after the changes.
1.3.6.1.4.1.7262.2.5.4.5.1.2.1.2Integer32read-onlycurrent
hzCpRadio1BandName
OBJECT-TYPE
The radio band name.
1.3.6.1.4.1.7262.2.5.4.5.1.2.1.3DisplayStringread-onlycurrent
hzCpRadio1BandProgrammed
OBJECT-TYPE
Specifies the operating radio band for the modem. ***Only 1 index may be selected in a 1 modem system.
1.3.6.1.4.1.7262.2.5.4.5.1.2.1.4INTEGER {active(1), notActive(2)}read-writecurrent
hzCpRadio1FreqTable
OBJECT-TYPE
A table of txHigh frequency settings for Radio 1
1.3.6.1.4.1.7262.2.5.4.5.1.3not-accessiblecurrent
hzCpRadio1FreqEntry
OBJECT-TYPE
A TX-High or TX-Low Frequency entry containing all the frequency values
1.3.6.1.4.1.7262.2.5.4.5.1.3.1not-accessiblecurrent
hzCpRadio1FreqIndex
OBJECT-TYPE
A unique value for each frequency channel.
1.3.6.1.4.1.7262.2.5.4.5.1.3.1.1Integer32read-onlycurrent
hzCpRadio1FreqChannelIndex
OBJECT-TYPE
The channel index for the frequency.
1.3.6.1.4.1.7262.2.5.4.5.1.3.1.2DisplayStringread-onlycurrent
hzCpRadio1FreqTransmitRfFrequency
OBJECT-TYPE
The RF TX frequency in KHz.
1.3.6.1.4.1.7262.2.5.4.5.1.3.1.3Integer32read-onlycurrent
hzCpRadio1FreqReceiveRfFrequency
OBJECT-TYPE
The RF RX frequency in KHz.
1.3.6.1.4.1.7262.2.5.4.5.1.3.1.4Integer32read-onlycurrent
hzCpRadio1FreqProgrammed
OBJECT-TYPE
Specifies the operating frequency channel for the modem. ***Only 1 index may be selected in a 1 modem system.
1.3.6.1.4.1.7262.2.5.4.5.1.3.1.5INTEGER {active(1), notActive(2)}read-writecurrent
hzCpRadio1ProgrammedFrequency
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.4.5.1.4
hzCpRadio1ProgrammedFrequencyChannel
OBJECT-TYPE
The channel that has been programmed for Radio 1.
1.3.6.1.4.1.7262.2.5.4.5.1.4.1DisplayStringread-onlycurrent
hzCpRadio1ProgrammedFrequencyTxRf
OBJECT-TYPE
The programmed RF TX frequency in KHz.
1.3.6.1.4.1.7262.2.5.4.5.1.4.2Integer32read-onlycurrent
hzCpRadio1ProgrammedFrequencyRxRf
OBJECT-TYPE
The RF RX frequency in KHz.
1.3.6.1.4.1.7262.2.5.4.5.1.4.3Integer32read-onlycurrent
hzCpSystemModeTable
OBJECT-TYPE
A table of system mode settings. Radio Band needs to be configured before the system mode.
1.3.6.1.4.1.7262.2.5.4.5.2not-accessiblecurrent
hzCpSystemModeEntry
OBJECT-TYPE
A system mode entry containing all the system mode values
1.3.6.1.4.1.7262.2.5.4.5.2.1not-accessiblecurrent
hzCpSystemModeIndex
OBJECT-TYPE
A unique value for each system mode.
1.3.6.1.4.1.7262.2.5.4.5.2.1.1Integer32read-onlycurrent
hzCpSystemModeId
OBJECT-TYPE
System mode Id.
1.3.6.1.4.1.7262.2.5.4.5.2.1.2Integer32read-onlycurrent
hzCpSystemModeName
OBJECT-TYPE
The system mode name.
1.3.6.1.4.1.7262.2.5.4.5.2.1.3DisplayStringread-onlycurrent
hzCpSystemModeProgrammed
OBJECT-TYPE
Specifies the operating system mode for the modem. Notes: Set Radio Band before System Mode Only 1 index may be selected. Changing this option might require a system reset unless the user has permission to set hzCpApplyFrequencyChangesToSystem after the changes.
1.3.6.1.4.1.7262.2.5.4.5.2.1.4INTEGER {active(1), notActive(2)}read-writecurrent
hzCpApplyFrequencyChangesToSystem
OBJECT-TYPE
If system allows, setting this oid applies the radio band, system mode and frequency changes dynamilcally and a system reset can be avoided.
1.3.6.1.4.1.7262.2.5.4.5.3INTEGER {apply(1)}read-writecurrent
hzCpWirelessInterfaceAntenna
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.4.6
hzCpAntennaDiameter
OBJECT-TYPE
This defines the diameter of the antenna represented in inches.
1.3.6.1.4.1.7262.2.5.4.6.1Integer32read-onlycurrent
hzCpAntennaTilt
OBJECT-TYPE
This defines the position of the antenna for radio 1.
1.3.6.1.4.1.7262.2.5.4.6.2INTEGER {unknown(1), vertical(2), horizontal(3), flat(4)}read-onlycurrent
hzCpAlarms
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.5
hzCpThresholdAlarmConfig
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.5.1
hzCpAggregatedThresholdAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.5.1.1
hzCpDroppedFramesThresholdParams
OBJECT-TYPE
The threshold, in percent, and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of frames that are dropped, the second is the time in seconds that the threshold must be exceeded. The single quote marks i.e. ' ' are not used in the command.
1.3.6.1.4.1.7262.2.5.5.1.1.1DisplayString (SIZE(0..24))read-writecurrent
hzCpBwUtilizationThresholdParams
OBJECT-TYPE
The percentage of available bandwidth threshold and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows: '70 10'. The first parameter is the threshold point in percent, the number of seconds that the threshold must be exceeded. The single quote marks i.e. ' ' are not used in the command.
1.3.6.1.4.1.7262.2.5.5.1.1.2DisplayString (SIZE(0..24))read-writecurrent
hzCpQBasedThresholdAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.5.1.2
hzCpQBasedThresholdAlarmTable
OBJECT-TYPE
A table of Q based Threshold Alarm settings
1.3.6.1.4.1.7262.2.5.5.1.2.1not-accessiblecurrent
hzCpQBasedThresholdAlarmEntry
OBJECT-TYPE
An entry based queues.
1.3.6.1.4.1.7262.2.5.5.1.2.1.1not-accessiblecurrent
hzCpQBasedThresholdIndex
OBJECT-TYPE
A unique identifier for one of the 8 queues
1.3.6.1.4.1.7262.2.5.5.1.2.1.1.1INTEGER {q1(1), q2(2), q3(3), q4(4), q5(5), q6(6), q7(7), q8(8)}read-onlycurrent
hzCpQBasedDepthThresholdParams
OBJECT-TYPE
The threshold, in percent, and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of queue depth, the second is the time in seconds that the threshold must be exceeded.
1.3.6.1.4.1.7262.2.5.5.1.2.1.1.2DisplayStringread-writecurrent
hzCpQBasedDroppedFramesThresholdParams
OBJECT-TYPE
The threshold, in percent, and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of frames that are dropped, the second is the time in seconds that the threshold must be exceeded.
1.3.6.1.4.1.7262.2.5.5.1.2.1.1.3DisplayStringread-writecurrent
hzCpWirelessInterfaceThresholdAlarmTable
OBJECT-TYPE
A table of wireless threshold crossing alarms
1.3.6.1.4.1.7262.2.5.5.1.3not-accessiblecurrent
hzCpWirelessInterfaceThresholdAlarmEntry
OBJECT-TYPE
An entry of wireless threshold crossing alarm
1.3.6.1.4.1.7262.2.5.5.1.3.1not-accessiblecurrent
hzCpWirelessInterfaceThresholdAlarmIndex
OBJECT-TYPE
A unique identifier for each wireless port
1.3.6.1.4.1.7262.2.5.5.1.3.1.1INTEGER {wireless-port-1(1)}read-onlycurrent
hzCpWirelessInterfaceRslThresholdParams
OBJECT-TYPE
A read-write string: The threshold in dBm and the number of seconds threshold are programmed by the user. An example of the format of the string is as follows: '-75 10'. The first parameter power level in dBm, the second is the time in seconds that the threshold must be exceeded. In this example the threshold -75 dBm and the time is set to 10 seconds. The single quote marks i.e. ' ' are not used in the command.
1.3.6.1.4.1.7262.2.5.5.1.3.1.2DisplayString (SIZE(0..24))read-writecurrent
hzCpWirelessInterfaceSnrThreshold
OBJECT-TYPE
A read-write string specifing the modem SNR threshold.
1.3.6.1.4.1.7262.2.5.5.1.3.1.3DisplayString (SIZE(0..24))read-writecurrent
hzCpAlarmConfigTable
OBJECT-TYPE
A table of alarm configuration
1.3.6.1.4.1.7262.2.5.5.2not-accessiblecurrent
hzCpAlarmConfigEntry
OBJECT-TYPE
An entry of alarm configuration
1.3.6.1.4.1.7262.2.5.5.2.1not-accessiblecurrent
hzCpAlarmConfigIndex
OBJECT-TYPE
A unique value for each alarm.
1.3.6.1.4.1.7262.2.5.5.2.1.1INTEGER {linkDown(1), peerAuthenticationFailure(2), haamConfigMismatch(3), haamOnLowModulation(4), atpcConfigMismatch(5), atpcAutoDisabled(6), sntpUnreachable(7), freqFileInvalid(8), aggregateDroppedFramesThreshold(9), queueDroppedFramesThreshold(10), bwUtilizationThreshold(11), queueDepthThreshold(12), rlsConfigMismatch(13), rlsShutdownActivated(14), rlsQBasedShutdown(15), modemRxLossOfSignal(16), modemSnrBelowThreshold(17), modemEqStressAboveThreshold(18), rslBelowThershold(19), radioSynthLostLock(20), radioCalTableUnavailable(21), radioCurrentOutOfLimits(22), radioPowerAmp(23), tempOutOfLimits(24), redundancyConfigMismatch(25), redundancyActiveOnSecondary(26), redundancyOperatingInForcedSwitch(27), redundancyEnetCrossLinkActive(28), redundancyActiveUsingPartnerWLink(29), redundancyStandbyWLinkInUse(30), redundancyStandbyOnPrimary(31), x2DeliveringHalfCapacity(32), bncSignalNotDetected(33), ethernetSpeedReduced(34), synceLostLock(35), synceSecondarySourceInUse(36), invalidSysConfig(37), mibChangeNotSaved(38), transmitterLossOfSync(39), radioLinearityCalError(40), synceConfigMismatch(41), cryptoPowerUpTestsFailed(42), cyptoConfigMismatch(43)}read-onlycurrent
hzCpAlarmInstanceIndex
OBJECT-TYPE
A unique value for each instance of an alarm.
1.3.6.1.4.1.7262.2.5.5.2.1.2Unsigned32read-onlycurrent
hzCpAlarmConfigSeverity
OBJECT-TYPE
The severity of the alarm as minor, major or critical.
1.3.6.1.4.1.7262.2.5.5.2.1.3INTEGER {minor(1), major(2), critical(3)}read-writecurrent
hzCpAlarmConfigState
OBJECT-TYPE
The state of the alarm which can be either enabled or disabled.
1.3.6.1.4.1.7262.2.5.5.2.1.4INTEGER {disable(1), enable(2)}read-writecurrent
hzCpAlarmStatusTable
OBJECT-TYPE
A table of alarm status
1.3.6.1.4.1.7262.2.5.5.3not-accessiblecurrent
hzCpAlarmStatusEntry
OBJECT-TYPE
An entry of alarm status
1.3.6.1.4.1.7262.2.5.5.3.1not-accessiblecurrent
hzCpAlarmStatusIndex
OBJECT-TYPE
A unique value for each alarm.
1.3.6.1.4.1.7262.2.5.5.3.1.1INTEGER {linkDown(1), peerAuthenticationFailure(2), haamConfigMismatch(3), haamOnLowModulation(4), atpcConfigMismatch(5), atpcAutoDisabled(6), sntpUnreachable(7), freqFileInvalid(8), aggregateDroppedFramesThreshold(9), queueDroppedFramesThreshold(10), bwUtilizationThreshold(11), queueDepthThreshold(12), rlsConfigMismatch(13), rlsShutdownActivated(14), rlsQBasedShutdown(15), modemRxLossOfSignal(16), modemSnrBelowThreshold(17), modemEqStressAboveThreshold(18), rslBelowThershold(19), radioSynthLostLock(20), radioCalTableUnavailable(21), radioCurrentOutOfLimits(22), radioPowerAmp(23), tempOutOfLimits(24), redundancyConfigMismatch(25), redundancyActiveOnSecondary(26), redundancyOperatingInForcedSwitch(27), redundancyEnetCrossLinkActive(28), redundancyActiveUsingPartnerWLink(29), redundancyStandbyWLinkInUse(30), redundancyStandbyOnPrimary(31), x2DeliveringHalfCapacity(32), bncSignalNotDetected(33), ethernetSpeedReduced(34), synceLostLock(35), synceSecondarySourceInUse(36), invalidSysConfig(37), mibChangeNotSaved(38), transmitterLossOfSync(39), radioLinearityCalError(40), synceConfigMismatch(41), cryptoPowerUpTestsFailed(42), cryptoConfigMismatch(43)}read-onlycurrent
hzCpAlarmStatusInstanceIndex
OBJECT-TYPE
A unique value for each instance of an alarm.
1.3.6.1.4.1.7262.2.5.5.3.1.2Unsigned32read-onlycurrent
hzCpAlarmStatus
OBJECT-TYPE
Indicates whether the alarm exists or not.
1.3.6.1.4.1.7262.2.5.5.3.1.3INTEGER {off(1), on(2)}read-onlycurrent
hzCpAlarmRaisedDateAndTime
OBJECT-TYPE
Specifies the date and time when the alarm was raised. If the alarm never occured, the value shows as zero.
1.3.6.1.4.1.7262.2.5.5.3.1.4DateAndTimeread-onlycurrent
hzCpAlarmClearedDateAndTime
OBJECT-TYPE
Specifies the date and time when the alarm was cleared. If the alarm never occured, the value shows as zero.
1.3.6.1.4.1.7262.2.5.5.3.1.5DateAndTimeread-onlycurrent
hzCpQos
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.6
hzCpQosEnable
OBJECT-TYPE
Indicates whether QOS is enabled.
1.3.6.1.4.1.7262.2.5.6.1INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpCosType
OBJECT-TYPE
Indicates the class of service tag type. Based on the setting Horizon will use the CoS value in the VLAN tag, or Q-in-Q inner VLAN tag, or Q-in-Q outer VLAN tag.
1.3.6.1.4.1.7262.2.5.6.2INTEGER {cosVlan(1), cosQinQiTag(2), cosQinQoTag(3), cosDscp(4), cosMplsExp(5)}read-writecurrent
hzCpCosQinQiTag
OBJECT-TYPE
Sets the value of the Q-in-Q inner tag. This tag is also used to classify the non-Q-in-Q VLAN. Default value is 0x8100.
1.3.6.1.4.1.7262.2.5.6.3DisplayStringread-writecurrent
hzCpCosQinQoTag
OBJECT-TYPE
Sets the value of the Q-in-Q outer VLAN tag. Default value is 0x8100.
1.3.6.1.4.1.7262.2.5.6.4DisplayStringread-writecurrent
hzCpCosExpediteQueue
OBJECT-TYPE
This sets the user queue operation mode. (a) In expedite mode, any Queue can be assigned 100% of CIR. Queue 4 is serviced first and queue 1 is servcied last.(b) In non expedite mode, the sum of all CIRs must be equal to 100%. In this mode higher priority queues will be serviced first until that queue is emptied or the defined CIR is reached.
1.3.6.1.4.1.7262.2.5.6.5INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpCosQueueCIR
OBJECT-TYPE
Committed Information Rate (CIR) assignments for CoS queues 1 to 4. CIR is assigned as the percentage of system current speed. When expedite queue is enabled any queue can be assigned 100% bandwidth. When expedite queue is disabled the sum of CIR of all queues should be 100.
1.3.6.1.4.1.7262.2.5.6.6DisplayString (SIZE(0..32))read-writecurrent
hzCpCosQueueCBS
OBJECT-TYPE
Comitted Burst Size (CBS) for CoS queues 1 to 4. CBS is the percentage of total packet buffer size. The sum of CBS's of all 4 queues must be equal to 100. Minimum CBS assignable to any queue is 1.
1.3.6.1.4.1.7262.2.5.6.7DisplayString (SIZE(0..32))read-writecurrent
hzCpQosPolicy
OBJECT-TYPE
Sets the Qos policy.
1.3.6.1.4.1.7262.2.5.6.8INTEGER {strict-priority(1), wfq(2)}read-writecurrent
hzCpCosWfqWeight
OBJECT-TYPE
The weight assigned to each of the 4 cos queue. The wireless bandwidth is distributed amongst the queues proportional to their weight. The weights have values from 0-15, where 0 is the lowest weight and 15 is the highest weight. Setting the Cos weight example: 1 2 3 4.
1.3.6.1.4.1.7262.2.5.6.9DisplayString (SIZE(0..32))read-writecurrent
hzCpCosNumPriorityQueues
OBJECT-TYPE
When expedite queue is enabled, user can set the number of priority queues. The default value for number of priority queues are 2, maximum is 4 and minimum is 1.
1.3.6.1.4.1.7262.2.5.6.10Integer32read-writecurrent
hzCpCosCutThroughQueue
OBJECT-TYPE
Cut through queue can be enabled or disabled. Any one of the 8 queues can be selected as cut through queue.
1.3.6.1.4.1.7262.2.5.6.11INTEGER {off(1), q1(2), q2(3), q3(4), q4(5), q5(6), q6(7), q7(8), q8(9)}read-writecurrent
hzCpQosPortConfigTable
OBJECT-TYPE
A table of Qos Settings per port
1.3.6.1.4.1.7262.2.5.6.12not-accessiblecurrent
hzCpQosPortConfigEntry
OBJECT-TYPE
An entry of Qos setting per port
1.3.6.1.4.1.7262.2.5.6.12.1not-accessiblecurrent
hzCpCosPortIndex
OBJECT-TYPE
A unique name identifying each enet port
1.3.6.1.4.1.7262.2.5.6.12.1.1INTEGER {enet-port-1(1), enet-port-2(2), enet-port-3(3), enet-port-4(4)}read-onlycurrent
hzCpCosQueueMapping
OBJECT-TYPE
User queue assignments for CoS values 0 to 7. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue. CoS to queue mapping example: 1 7 2 8 3 6 1 4.
1.3.6.1.4.1.7262.2.5.6.12.1.2DisplayStringread-writecurrent
hzCpCosDefaultValue
OBJECT-TYPE
Default CoS value assigned to the ethernet frames that don't have VLAN or Q-in-Q tag.
1.3.6.1.4.1.7262.2.5.6.12.1.3Integer32 (0..7)read-writecurrent
hzCpCosUserFlowDepTable
OBJECT-TYPE
A table of Cos user flow setting
1.3.6.1.4.1.7262.2.5.6.13not-accessibledeprecated
hzCpCosUserFlowDepEntry
OBJECT-TYPE
An entry of Cos user flow setting
1.3.6.1.4.1.7262.2.5.6.13.1not-accessibledeprecated
hzCpCosUserFlowIndexDep
OBJECT-TYPE
This object is deprecated by hzCpCosUserFlowMappingIndex.
1.3.6.1.4.1.7262.2.5.6.13.1.1INTEGER {flow1(1), flow2(2), flow3(3)}read-onlydeprecated
hzCpCosUserFlowStateDep
OBJECT-TYPE
This object is deprecated by entries in hzCpCosUserFlowMappingTable.
1.3.6.1.4.1.7262.2.5.6.13.1.2DisplayStringread-onlydeprecated
hzCpCosUserClassTable
OBJECT-TYPE
A table of Cos user class setting.
1.3.6.1.4.1.7262.2.5.6.14not-accessiblecurrent
hzCpCosUserClassEntry
OBJECT-TYPE
An entry of Cos user class setting.
1.3.6.1.4.1.7262.2.5.6.14.1not-accessiblecurrent
hzCpCosUserClassIndex
OBJECT-TYPE
A unique name specifying user class group.
1.3.6.1.4.1.7262.2.5.6.14.1.1INTEGER {c1(1), c2(2), c3(3), c4(4), c5(5), c6(6), c7(7), c8(8), c9(9), c10(10), c11(11), c12(12), c13(13)}read-onlycurrent
hzCpCosUserClassOffset
OBJECT-TYPE
Specifies the user class offset. The valid range is 0-31.
1.3.6.1.4.1.7262.2.5.6.14.1.2Integer32read-writecurrent
hzCpCosUserClassValue
OBJECT-TYPE
A string specifying the user class value in hex format. The string must hold even number of characters.
1.3.6.1.4.1.7262.2.5.6.14.1.3DisplayStringread-writecurrent
hzCpCosUserClassMask
OBJECT-TYPE
A string specifying the user class mask in hex format. The string must hold even number of characters and have the same length as the user class value.
1.3.6.1.4.1.7262.2.5.6.14.1.4DisplayStringread-writecurrent
hzCpCosUserFlowFilterTable
OBJECT-TYPE
A table of Cos user flow filter setting.
1.3.6.1.4.1.7262.2.5.6.15not-accessiblecurrent
hzCpCosUserFlowFilterEntry
OBJECT-TYPE
An entry of Cos user flow filter setting.
1.3.6.1.4.1.7262.2.5.6.15.1not-accessiblecurrent
hzCpCosUserFlowFilterIndex
OBJECT-TYPE
A unique name specifying user flow group.
1.3.6.1.4.1.7262.2.5.6.15.1.1INTEGER {flow1(1), flow2(2), flow3(3), flow4(4), flow5(5), flow6(6), flow7(7), flow8(8), flow9(9), flow10(10), flow11(11), flow12(12), flow13(13)}read-onlycurrent
hzCpCosUserFlowFilter
OBJECT-TYPE
A string specifying the user class combination. For example a user flow can be configured to include c1 c5. If a user class hasn't been assigned a value and mask, the class can't be part of the user flow filter.
1.3.6.1.4.1.7262.2.5.6.15.1.2DisplayStringread-writecurrent
hzCpCosUserFlowMappingTable
OBJECT-TYPE
A table of Cos user flow mapping setting.
1.3.6.1.4.1.7262.2.5.6.16not-accessiblecurrent
hzCpCosUserFlowMappingEntry
OBJECT-TYPE
An entry of Cos user flow mapping setting.
1.3.6.1.4.1.7262.2.5.6.16.1not-accessiblecurrent
hzCpCosUserFlowMappingIndex
OBJECT-TYPE
A unique name specifying user flow group.
1.3.6.1.4.1.7262.2.5.6.16.1.1INTEGER {flow1(1), flow2(2), flow3(3), flow4(4), flow5(5), flow6(6), flow7(7), flow8(8), flow9(9), flow10(10), flow11(11), flow12(12), flow13(13)}read-onlycurrent
hzCpCosUserFlowEnable
OBJECT-TYPE
Enables or disables a CoS user flow.
1.3.6.1.4.1.7262.2.5.6.16.1.2INTEGER {disable(1), enable(2)}read-writecurrent
hzCpCosUserFlowP1Queue
OBJECT-TYPE
Specifies the selected queue for P1.
1.3.6.1.4.1.7262.2.5.6.16.1.3INTEGER {q1(1), q2(2), q3(3), q4(4), q5(5), q6(6), q7(7), q8(8)}read-writecurrent
hzCpCosUserFlowP1TargetPort
OBJECT-TYPE
Specifies the target egress port for P1.
1.3.6.1.4.1.7262.2.5.6.16.1.4INTEGER {p1(1), p2(2), p3(3), p4(4)}read-writecurrent
hzCpCosUserFlowP2Queue
OBJECT-TYPE
Specifies the selected queue for P2.
1.3.6.1.4.1.7262.2.5.6.16.1.5INTEGER {q1(1), q2(2), q3(3), q4(4), q5(5), q6(6), q7(7), q8(8)}read-writecurrent
hzCpCosUserFlowP2TargetPort
OBJECT-TYPE
Specifies the target egress port for P2.
1.3.6.1.4.1.7262.2.5.6.16.1.6INTEGER {p1(1), p2(2), p3(3), p4(4)}read-writecurrent
hzCpCosUserFlowP3Queue
OBJECT-TYPE
Specifies the selected queue for P3.
1.3.6.1.4.1.7262.2.5.6.16.1.7INTEGER {q1(1), q2(2), q3(3), q4(4), q5(5), q6(6), q7(7), q8(8)}read-writecurrent
hzCpCosUserFlowP3TargetPort
OBJECT-TYPE
Specifies the target egress port for P3.
1.3.6.1.4.1.7262.2.5.6.16.1.8INTEGER {p1(1), p2(2), p3(3), p4(4)}read-writecurrent
hzCpCosUserFlowP4Queue
OBJECT-TYPE
Specifies the selected queue for P4.
1.3.6.1.4.1.7262.2.5.6.16.1.9INTEGER {q1(1), q2(2), q3(3), q4(4), q5(5), q6(6), q7(7), q8(8)}read-writecurrent
hzCpCosUserFlowP4TargetPort
OBJECT-TYPE
Specifies the target egress port for P4.
1.3.6.1.4.1.7262.2.5.6.16.1.10INTEGER {p1(1), p2(2), p3(3), p4(4)}read-writecurrent
hzCpRapidLinkShutdown
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.7
hzCpRlsMode
OBJECT-TYPE
Off, when the RLS feature is disabled. Basic when the feature is enabled but hard fault monitor is disabled. Advanced when the feature is enabled and hard fault monitor is enabled. Changing this option requires a system reset.
1.3.6.1.4.1.7262.2.5.7.1INTEGER {off(1), basic(2), advanced(3)}read-writecurrent
hzCpRlsLinkControl
OBJECT-TYPE
Returns RLS user control for re-enabling failed link. If manual, then user has to explicitly enable the link.
1.3.6.1.4.1.7262.2.5.7.2INTEGER {auto(1), manual(2)}read-writecurrent
hzCpApplyRlsMonitorParametersToSystem
OBJECT-TYPE
This writes RLS soft and hard fault monitor parameters to RAM Reading this object returns '1'.
1.3.6.1.4.1.7262.2.5.7.3INTEGER {apply(1)}read-writecurrent
hzCpRlsLinkEnable
OBJECT-TYPE
Returns RLS global link enable status as on or off. If off, the link will be shutdown.
1.3.6.1.4.1.7262.2.5.7.4INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpRlsPortGroup
OBJECT-TYPE
Specifies the RLS port group configuration setting. Options are the port list and any/all. For example: p1,p3 any - RLS will trigger if either p1 or p3 is down. or p1,p2,p3 all - RLS will trigger only if all p1,p2 and p3 are down.
1.3.6.1.4.1.7262.2.5.7.5DisplayStringread-writecurrent
hzCpRlsShutdownPolicy
OBJECT-TYPE
Indicated whether to shutdown the port or send an EOAM message when RLS is triggered.
1.3.6.1.4.1.7262.2.5.7.6INTEGER {port-down(1), eoam-msg(2)}read-writecurrent
hzCpRlsSoftFaultMonitorTable
OBJECT-TYPE
A table of RLS Soft Fault Monitor Parameters
1.3.6.1.4.1.7262.2.5.7.7not-accessiblecurrent
hzCpRlsSoftFaultMonitorEntry
OBJECT-TYPE
RLS Parameters for Soft Fault Monitoring
1.3.6.1.4.1.7262.2.5.7.7.1not-accessiblecurrent
hzCpRlsSoftFaultMonitorIndex
OBJECT-TYPE
A unique value for each interface.
1.3.6.1.4.1.7262.2.5.7.7.1.1INTEGER {wireless-port-1(1)}read-onlycurrent
hzCpRlsEstablishErredFrameThreshold
OBJECT-TYPE
Maximum erred blocks, per sample, allowed for link establishment.
1.3.6.1.4.1.7262.2.5.7.7.1.2Integer32read-writecurrent
hzCpRlsShutdownErredFrameThreshold
OBJECT-TYPE
Minimum erred blocks, per sample, allowed before link shutdown.
1.3.6.1.4.1.7262.2.5.7.7.1.3Integer32read-writecurrent
hzCpRlsEstablishNumberOfSamples
OBJECT-TYPE
Minimum number of consecutive good samples required before link is established.
1.3.6.1.4.1.7262.2.5.7.7.1.4Integer32read-writecurrent
hzCpRlsShutdownNumberOfSamples
OBJECT-TYPE
Minimum number of consecutive erred samples before link is shutdown.
1.3.6.1.4.1.7262.2.5.7.7.1.5Integer32read-writecurrent
hzCpRlsEstablishSamplePeriod
OBJECT-TYPE
Period of Time, in milliseconds, for monitoring Establish Erred Frame Threshold.
1.3.6.1.4.1.7262.2.5.7.7.1.6Integer32read-writecurrent
hzCpRlsShutdownSamplePeriod
OBJECT-TYPE
Period of Time, in milliseconds, for monitoring Shutdown Erred Frame Threshold.
1.3.6.1.4.1.7262.2.5.7.7.1.7Integer32read-writecurrent
hzCpRlsQuickShutdownSamplePeriod
OBJECT-TYPE
Minimum number of milliseconds required to classify samples as erred.
1.3.6.1.4.1.7262.2.5.7.7.1.8Integer32read-writecurrent
hzCpRlsHardFaultMonitorTable
OBJECT-TYPE
A table of RLS Hard Fault Monitor Parameters
1.3.6.1.4.1.7262.2.5.7.8not-accessiblecurrent
hzCpRlsHardFaultMonitorEntry
OBJECT-TYPE
RLS Parameters for Hard Fault Monitoring
1.3.6.1.4.1.7262.2.5.7.8.1not-accessiblecurrent
hzCpRlsHardFaultMonitorIndex
OBJECT-TYPE
A unique value for each interface.
1.3.6.1.4.1.7262.2.5.7.8.1.1INTEGER {wireless-port-1(1)}read-onlycurrent
hzCpRlsHardFaultSamplePeriod
OBJECT-TYPE
The period of time, in milliseconds, for which the rlsFaultThreshold is applied.
1.3.6.1.4.1.7262.2.5.7.8.1.2Integer32read-writecurrent
hzCpRlsHardFaultThreshold
OBJECT-TYPE
The percentage of the rlsFaultSamplePeriodMilliSeconds period which must be degraded before the link is set to the 'impaired' state.
1.3.6.1.4.1.7262.2.5.7.8.1.3Integer32read-writecurrent
hzCpRlsReceiveSignalLevelMonitorTable
OBJECT-TYPE
A table of RLS RSL Monitor Parameters
1.3.6.1.4.1.7262.2.5.7.9not-accessiblecurrent
hzCpRlsReceiveSignalLevelMonitorEntry
OBJECT-TYPE
RLS RSL Monitor Parameters
1.3.6.1.4.1.7262.2.5.7.9.1not-accessiblecurrent
hzCpRlsReceiveSignalLevelMonitorIndex
OBJECT-TYPE
A unique value for each interface.
1.3.6.1.4.1.7262.2.5.7.9.1.1INTEGER {wireless-port-1(1)}read-onlycurrent
hzCpRlsMakeRslMonitorRslValue
OBJECT-TYPE
The RSL threshold, in dBm. When Link is inactive and if RSL is higher than this threshold for a desired period, the link will become active.
1.3.6.1.4.1.7262.2.5.7.9.1.2DisplayStringread-writecurrent
hzCpRlsMakeRslMonitorPeriod
OBJECT-TYPE
The desired period, in seconds. When Link is inactive and if RSL is higher than the desiredthreshold for this period, the link will become active.
1.3.6.1.4.1.7262.2.5.7.9.1.3Integer32read-writecurrent
hzCpRlsStatusTable
OBJECT-TYPE
A table of RLS Parameters and states
1.3.6.1.4.1.7262.2.5.7.10not-accessiblecurrent
hzCpRlsStatusEntry
OBJECT-TYPE
RLS Parameters and states
1.3.6.1.4.1.7262.2.5.7.10.1not-accessiblecurrent
hzCpRlsStatusIndex
OBJECT-TYPE
A unique value for each interface.
1.3.6.1.4.1.7262.2.5.7.10.1.1INTEGER {wireless-port-1(1)}read-onlycurrent
hzCpRlsOption
OBJECT-TYPE
RLS Option. On Basic: RLS enabled with base degrade monitoring; On Advanced: RLS enabled with hard fault monitoring; Off: Entire RLS feature disabled.
1.3.6.1.4.1.7262.2.5.7.10.1.2DisplayStringread-onlycurrent
hzCpRlsState
OBJECT-TYPE
Rapid Link Shutdown State. If the state is activated, that means link is down; If the state is inactivated, that means that link is up.
1.3.6.1.4.1.7262.2.5.7.10.1.3DisplayStringread-onlycurrent
hzCpRlsMismatchState
OBJECT-TYPE
RLS Mismatch State. If the state is activated, that means RLS configuration is mismatched with peer. If the state is OK, that means RLS configuration is matched with peer.
1.3.6.1.4.1.7262.2.5.7.10.1.4DisplayStringread-onlycurrent
hzCpRlsDegradeMonitorState
OBJECT-TYPE
Degrade Monitor State. If the state is activated, that means the RLS Degrade Monitor is asserting the link down. If the state is OK, that means the RLS Degrade Monitor is asserting the link up.
1.3.6.1.4.1.7262.2.5.7.10.1.5DisplayStringread-onlycurrent
hzCpRlsHardFaultMonitorState
OBJECT-TYPE
Hard Fault Monitor State. If the state is activated, that means the Hard Fault Monitor is asserting the link down. If the state is OK, that means the RLS Hard Fault Monitor is asserting the link up.
1.3.6.1.4.1.7262.2.5.7.10.1.6DisplayStringread-onlycurrent
hzCpRlsMakeRslThresholdState
OBJECT-TYPE
Make RSL Threshold State. If the state is not met, that means the RLS signal level is below the threshold value. If the state is OK, that means the RLS signal level is above the threshold value.
1.3.6.1.4.1.7262.2.5.7.10.1.7DisplayStringread-onlycurrent
hzCpRlsPeerRslState
OBJECT-TYPE
Peer RSL State. If the state is activated, that means the peer has activated RLS. If the state is OK, that means the Peer hasn't activated RLS.
1.3.6.1.4.1.7262.2.5.7.10.1.8DisplayStringread-onlycurrent
hzCpRlsRadioInterfaceState
OBJECT-TYPE
Radio Interface State. If the state is down, that means The radio interface is not operational(muted,disconnected, not configured). If the state is up, that means the radio interface is operational.
1.3.6.1.4.1.7262.2.5.7.10.1.9DisplayStringread-onlycurrent
hzCpRlsNetworkInterfaceState
OBJECT-TYPE
Network Interface State. If the state is down, that means the network interface (Ethernet/PHY) is not operational(disconnected, not configured). If the state is up, that means the network interface (Ethernet/PHY) is operational.
1.3.6.1.4.1.7262.2.5.7.10.1.10DisplayStringread-onlycurrent
hzCpRlsUserConfiguredEstablishFer
OBJECT-TYPE
User Configured Establish Frame Error Ratio required for the link to be restored to service, set by the user. An example value being '1.0E-7'.
1.3.6.1.4.1.7262.2.5.7.10.1.11DisplayStringread-onlycurrent
hzCpRlsMinimumAchievableEstablishFer
OBJECT-TYPE
Minimum achievable Frame Error Ratio required for the link to be restored to service. An example value being '1.0E-7'.
1.3.6.1.4.1.7262.2.5.7.10.1.12DisplayStringread-onlycurrent
hzCpRlsUserConfiguredShutdownFer
OBJECT-TYPE
User Configured Shutdown Frame Error Ratio required for the link to remain in-service, set by the user. An example value being '1.0E-7'.
1.3.6.1.4.1.7262.2.5.7.10.1.13DisplayStringread-onlycurrent
hzCpRlsMinimumAchievableShutdownFer
OBJECT-TYPE
Minimum achievable Frame Error Ratio required for the link to remain in-service. An example value being '1.0E-7'.
1.3.6.1.4.1.7262.2.5.7.10.1.14DisplayStringread-onlycurrent
hzCpRlsUserConfiguredEstablishMonitorTime
OBJECT-TYPE
User Configured Establish Monitor Time, in milliseconds, for which the 'User Configured Establish FER' must be achieved to bring link into service, set by user
1.3.6.1.4.1.7262.2.5.7.10.1.15Integer32read-onlycurrent
hzCpRlsActualEstablishMonitorTime
OBJECT-TYPE
Actual Establish Monitor Time, in milliseconds, for which the 'User Configured Establish FER'must be achieved to bring link into service, it's a multiple of the establish sample period required to observe the FER
1.3.6.1.4.1.7262.2.5.7.10.1.16Integer32read-onlycurrent
hzCpRlsUserConfiguredShutdownMonitorTime
OBJECT-TYPE
User Configured Shutdown Monitor Time, in milliseconds, for which the 'User Configured Shutdown FER' must be met for the link to remain in-service, set by user.
1.3.6.1.4.1.7262.2.5.7.10.1.17Integer32read-onlycurrent
hzCpRlsActualShutdownMonitorTime
OBJECT-TYPE
Actual Shutdown Monitor Time, in milliseconds, for which the 'User Configured Shutdown FER' must be met for the link to remain in-service, it's a multiple of the shutdown sample period required to observe the FER
1.3.6.1.4.1.7262.2.5.7.10.1.18Integer32read-onlycurrent
hzCpLogs
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.8
hzCpEventLogEnable
OBJECT-TYPE
Indicates whether event log is enabled.
1.3.6.1.4.1.7262.2.5.8.1INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpPerfmLogEnable
OBJECT-TYPE
Indicates whether performance log is enabled.
1.3.6.1.4.1.7262.2.5.8.2INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpPerfmLogInterval
OBJECT-TYPE
Performance statistics are logged periodically by this interval. The interval can be up to 24:00:00 (24 hours) and as short as 00:00:1 (1 seconds).
1.3.6.1.4.1.7262.2.5.8.3DisplayString (SIZE(0..10))read-writecurrent
hzCpSysLog
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.8.4
hzCpSysLogEnable
OBJECT-TYPE
Indicates whether sys log is enabled.
1.3.6.1.4.1.7262.2.5.8.4.1INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpSysLogIpAddressDep
OBJECT-TYPE
Indicates the IP address of sys log. This object is deprecated by hzCpSysLogHostAddress. The value is 0.0.0.0 if not available or not applicable.
1.3.6.1.4.1.7262.2.5.8.4.2IpAddressread-onlydeprecated
hzCpSysLogHostDomain
OBJECT-TYPE
Indicates sys log host inet address type. Valid types are ipv4 or ipv6.
1.3.6.1.4.1.7262.2.5.8.4.3InetAddressTyperead-writecurrent
hzCpSysLogHostAddress
OBJECT-TYPE
Indicates sys log host inet address octet string. This object deprecates hzCpSysLogIpAddressDep.
1.3.6.1.4.1.7262.2.5.8.4.4InetAddressread-writecurrent
hzCpAtpc
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.9
hzCpAtpcEnable
OBJECT-TYPE
Indicates whether the Adaptive Transmit Power Control (ATPC) feature is enabled.
1.3.6.1.4.1.7262.2.5.9.1INTEGER {off(1), on(2)}read-writecurrent
hzCpAtpcStatus
OBJECT-TYPE
Indicates the actual condition of ATPC: disabled Configuration is set to off. disabledAuto Feature was automatically disabled and is transmitting at coordinated power. running Feature is running normally. runningToggling Feature is toggling between maximum and minimum power to recover from a loss of mod sync. suspended Feature was suspended. suspendedLostComm Feature is suspended because communication is lost with peer ATPC. suspendedRadioDown Feature is suspended because the radio is down. suspendedRadioMuted Feature is suspended because the radio is muted. suspendedRadioLoopback Feature is suspended because the radio is in loopback mode.
1.3.6.1.4.1.7262.2.5.9.2INTEGER {disabled(1), disabledAuto(2), running(3), runningToggling(4), suspended(5), suspendedLostComm(6), suspendedRadioDown(7), suspendedRadioMuted(8), suspendedRadioLoopback(9)}read-onlycurrent
hzCpAtpcCoordinatedPowerDbm
OBJECT-TYPE
This value is the coordinated power offset from the configured transmit power. The value is multiplied by 10. e.g. A display of 133 is actually 13.3 dBm.
1.3.6.1.4.1.7262.2.5.9.3Integer32read-writecurrent
hzCpAtpcCoordinatedPwrEnable
OBJECT-TYPE
Indicates whether Adaptive Transmit Power Control (ATPC) coordinated power option is enabled.
1.3.6.1.4.1.7262.2.5.9.4INTEGER {disabled(1), enabled(2)}read-writecurrent
hzCpAtpcMinTxPower
OBJECT-TYPE
Sets the minimum ATPC transmit power in dBm x 10. Valid range -990..100.
1.3.6.1.4.1.7262.2.5.9.5Integer32read-writecurrent
hzCpAtpcMaxTxPower
OBJECT-TYPE
Sets the maximum ATPC transmit power in dBm x 10. When ATPC is enabled, transmit power range will be between ATPC min. and ATPC max. power.
1.3.6.1.4.1.7262.2.5.9.6Integer32read-writecurrent
hzCpHitlessAam
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.10
hzCpHitlessAamEnable
OBJECT-TYPE
Read or set the Hitless Automatic Adaptive Modulation (HAAM) as 'on' or 'off'.
1.3.6.1.4.1.7262.2.5.10.1INTEGER {off(1), on(2)}read-writecurrent
hzCpHitlessAamManualMode
OBJECT-TYPE
Read or set the Hitless Automatic Adaptive Modulation (HAAM) Manual Mode as 'on' or 'off'.
1.3.6.1.4.1.7262.2.5.10.2INTEGER {off(1), on(2)}read-writecurrent
hzCpHitlessAamWaitToRestore
OBJECT-TYPE
Read or set the Hitless Automatic Adaptive Modulation (HAAM) wait to restore duration time in seconds.
1.3.6.1.4.1.7262.2.5.10.3Integer32read-writecurrent
hzCpHitlessAamOrgSpecEoamMsg
OBJECT-TYPE
Turns on or off the Hitless Automatic Adaptive Modulation (HAAM) Organizational Specific EOAM message to peer.
1.3.6.1.4.1.7262.2.5.10.4INTEGER {off(1), on(2)}read-writecurrent
hzCpHitlessAamTable
OBJECT-TYPE
A table of Hitless Aam.
1.3.6.1.4.1.7262.2.5.10.5not-accessiblecurrent
hzCpHitlessAamEntry
OBJECT-TYPE
Hitless Aam Status and Configurations.
1.3.6.1.4.1.7262.2.5.10.5.1not-accessiblecurrent
hzCpWirelessPortIndex
OBJECT-TYPE
A unique value for each interface.
1.3.6.1.4.1.7262.2.5.10.5.1.1INTEGER {wireless-port-1(1)}read-onlycurrent
hzCpHitlessAamCurrentMode
OBJECT-TYPE
A read-only string specifing the currently running Hitless AAM Mode.
1.3.6.1.4.1.7262.2.5.10.5.1.2DisplayString (SIZE(0..24))read-onlycurrent
hzCpHitlessAamModeTable
OBJECT-TYPE
A table of HitlessAam available modes.
1.3.6.1.4.1.7262.2.5.10.6not-accessiblecurrent
hzCpHitlessAamModeEntry
OBJECT-TYPE
A HAAM mode entry containing all the HAAM system mode values
1.3.6.1.4.1.7262.2.5.10.6.1not-accessiblecurrent
hzCpHitlessAamModeIndex
OBJECT-TYPE
A unique value for each Hitless Aam mode.
1.3.6.1.4.1.7262.2.5.10.6.1.1Integer32read-onlycurrent
hzCpHitlessAammModeName
OBJECT-TYPE
The Hitless Aam mode name.
1.3.6.1.4.1.7262.2.5.10.6.1.2DisplayStringread-onlycurrent
hzCpHitlessAamModeRange
OBJECT-TYPE
Specifies the Hitless Aam available and max system mode. Only max option is allowed to be set in this release.
1.3.6.1.4.1.7262.2.5.10.6.1.3INTEGER {notAllowed(1), allowed(2), max(3)}read-writecurrent
hzCpSnmpNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.7262.2.5.11

Notifications

NameOIDStatus
hzCpLinkDown
NOTIFICATION-TYPE
A linkDown trap signifies that the sending protocol entity recognizes a failure in one of the communication links represented in the agent's configuration.
1.3.6.1.4.1.7262.2.5.11.1current
hzCpLinkUp
NOTIFICATION-TYPE
A linkUp trap signifies that the sending protocol entity recognizes that one of the communication links represented in the agent's configuration has come up.
1.3.6.1.4.1.7262.2.5.11.2current
hzCpPeerAuthenticationFailure
NOTIFICATION-TYPE
Authentication of the peer horizon node has failed. The severity is critical, the probable cause is an incorrect authentication configuration on horizon faulty cable between the modem and radio, and recommended course of action is to check both ends of the link.
1.3.6.1.4.1.7262.2.5.11.3current
hzCpPeerAuthenticationFailureCleared
NOTIFICATION-TYPE
The condition has cleared. The peer node is now authenticated.
1.3.6.1.4.1.7262.2.5.11.4current
hzCpHitlessAamConfigMisMatch
NOTIFICATION-TYPE
Hitless Automatic Adaptive modulation configuration mismatch
1.3.6.1.4.1.7262.2.5.11.5current
hzCpHitlessAamConfigMisMatchCleared
NOTIFICATION-TYPE
Hitless Automatic Adaptive modulation configuration mismatch cleared
1.3.6.1.4.1.7262.2.5.11.6current
hzCpHitlessAamModulationLowered
NOTIFICATION-TYPE
Hitless Automatic Adaptive modulation on and system running on lowest modulation
1.3.6.1.4.1.7262.2.5.11.7current
hzCpHitlessAamModulationLoweredCleared
NOTIFICATION-TYPE
Hitless Automatic Adaptive modulation on system running on higher modulation
1.3.6.1.4.1.7262.2.5.11.8current
hzCpHitlessAamModulationChangedEvent
NOTIFICATION-TYPE
Hitless Automatic Adaptive has changed modulation.
1.3.6.1.4.1.7262.2.5.11.9current
hzCpAtpcConfigMismatch
NOTIFICATION-TYPE
ATPC configuration mismatch in the Horizon Compact Plus systems. ATPC is enabled at one system, but disabled at the other system.
1.3.6.1.4.1.7262.2.5.11.10current
hzCpAtpcConfigMismatchCleared
NOTIFICATION-TYPE
ATPC configuration mismatch in the Horizon systems is cleared. Both systems enabled ATPC.
1.3.6.1.4.1.7262.2.5.11.11current
hzCpAtpcAutoDisabled
NOTIFICATION-TYPE
ATPC auto-disabled (transmitting at coordinated power).
1.3.6.1.4.1.7262.2.5.11.12current
hzCpAtpcAutoDisabledCleared
NOTIFICATION-TYPE
ATPC has been enabled.
1.3.6.1.4.1.7262.2.5.11.13current
hzCpNoSntpServersReachable
NOTIFICATION-TYPE
Can't reach any of the SNTP servers
1.3.6.1.4.1.7262.2.5.11.14current
hzCpNoSntpServersReachableCleared
NOTIFICATION-TYPE
At least one of SNTP servers is reachable
1.3.6.1.4.1.7262.2.5.11.15current
hzCpFrequencyFileInvalid
NOTIFICATION-TYPE
This trap is generated when the executing frequency file is invalid.
1.3.6.1.4.1.7262.2.5.11.16current
hzCpAggregateDroppedFramesThreshold
NOTIFICATION-TYPE
The ethernet dropped frames threshold has been detected above its threshold value.
1.3.6.1.4.1.7262.2.5.11.17current
hzCpAggregateDroppedFramesThresholdCleared
NOTIFICATION-TYPE
The condition has cleared. The ethernet dropped frames threshold is now below its threshold value.
1.3.6.1.4.1.7262.2.5.11.18current
hzCpQueueDroppedFramesThreshold
NOTIFICATION-TYPE
The ethernet queue based dropped frames threshold has been detected above its threshold value.
1.3.6.1.4.1.7262.2.5.11.19current
hzCpQueueDroppedFramesThresholdCleared
NOTIFICATION-TYPE
The condition has cleared. The ethernet queue based dropped frames threshold is now below its threshold value.
1.3.6.1.4.1.7262.2.5.11.20current
hzCpBwUtilizationThreshold
NOTIFICATION-TYPE
The ethernet bandwidth threshold has been detected above its threshold value.
1.3.6.1.4.1.7262.2.5.11.21current
hzCpBwUtilizationThresholdCleared
NOTIFICATION-TYPE
The condition has cleared. The ethernet bandwidth threshold is now below its threshold value.
1.3.6.1.4.1.7262.2.5.11.22current
hzCpQueueDepthThreshold
NOTIFICATION-TYPE
The ethernet queue depth threshold has been detected above its threshold value.
1.3.6.1.4.1.7262.2.5.11.23current
hzCpQueueDepthThresholdCleared
NOTIFICATION-TYPE
The condition has cleared. The ethernet queue depth threshold is now below its threshold value.
1.3.6.1.4.1.7262.2.5.11.24current
hzCpRlsConfigMismatch
NOTIFICATION-TYPE
RLS Configuration mismatch
1.3.6.1.4.1.7262.2.5.11.25current
hzCpRlsConfigMismatchCleared
NOTIFICATION-TYPE
The condition has cleared.
1.3.6.1.4.1.7262.2.5.11.26current
hzCpRlsShutdownActivated
NOTIFICATION-TYPE
RLS shutdown activated
1.3.6.1.4.1.7262.2.5.11.27current
hzCpRlsShutdownActivatedCleared
NOTIFICATION-TYPE
RLS shutdown activated condition has cleared.
1.3.6.1.4.1.7262.2.5.11.28current
hzCpRlsQueueBasedShutdownActivated
NOTIFICATION-TYPE
RLS Queue-Based shutdown is activated
1.3.6.1.4.1.7262.2.5.11.29current
hzCpRlsQueueBasedShutdownActivatedCleared
NOTIFICATION-TYPE
RLS Queue-Based shutdown is not activated
1.3.6.1.4.1.7262.2.5.11.30current
hzCpModemRxLossOfSignalLock
NOTIFICATION-TYPE
Loss of signal lock from the demodulator. The severity is critical, the probable cause is lost synchronization with the far end, and recommended course of action is to check the operational state of both ends of the link.
1.3.6.1.4.1.7262.2.5.11.31current
hzCpModemRxLossOfSignalLockCleared
NOTIFICATION-TYPE
Loss of signal lock from demodulator condition has cleared.
1.3.6.1.4.1.7262.2.5.11.32current
hzCpModemSnrBelowThreshold
NOTIFICATION-TYPE
The demodulator SNR performance worse than programmed levels. The severity is major, the probable cause is physical interference in the air link path or misalignment of the radios or severe weather conditions, and recommended course of action is to check the line of site between the horizon nodes.
1.3.6.1.4.1.7262.2.5.11.33current
hzCpModemSnrBelowThresholdCleared
NOTIFICATION-TYPE
SNR performance back to normal.
1.3.6.1.4.1.7262.2.5.11.34current
hzCpModemEqualizerStressThreshold
NOTIFICATION-TYPE
Equalizer Stress measured within the demodulator exceeds the threshold value.
1.3.6.1.4.1.7262.2.5.11.35current
hzCpModemEqualizerStressThresholdCleared
NOTIFICATION-TYPE
Equalizer Stress measured within the demodulator is within the threshold value.
1.3.6.1.4.1.7262.2.5.11.36current
hzCpRslBelowThreshold
NOTIFICATION-TYPE
The RSL has been detected below its minimum threshold.
1.3.6.1.4.1.7262.2.5.11.37current
hzCpRslBelowThresholdCleared
NOTIFICATION-TYPE
The condition has cleared. RSL is now above its minimum threshold.
1.3.6.1.4.1.7262.2.5.11.38current
hzCpRadioSynthLostLock
NOTIFICATION-TYPE
The PLDRO/LO has lost lock on the radio. The severity is critical, the probable cause a faulty radio unit within AirPair, and recommended course of action is to replace the radio unit
1.3.6.1.4.1.7262.2.5.11.39current
hzCpRadioSynthLostLockCleared
NOTIFICATION-TYPE
The radio PLDRO/LO lost lock condition has cleared.
1.3.6.1.4.1.7262.2.5.11.40current
hzCpRadioCalTableNotAvailable
NOTIFICATION-TYPE
Temp comp table not available.
1.3.6.1.4.1.7262.2.5.11.41current
hzCpRadioCalTableNotAvailableCleared
NOTIFICATION-TYPE
Cal table is now available.
1.3.6.1.4.1.7262.2.5.11.42current
hzCpRadioDrainCurrentOutOfLimit
NOTIFICATION-TYPE
Radio current out of limits.
1.3.6.1.4.1.7262.2.5.11.43current
hzCpRadioDrainCurrentOutOfLimitCleared
NOTIFICATION-TYPE
Radio current out of limits cleared.
1.3.6.1.4.1.7262.2.5.11.44current
hzCpRadioPowerAmplifier
NOTIFICATION-TYPE
Radio power amplifier
1.3.6.1.4.1.7262.2.5.11.45current
hzCpRadioPowerAmplifierCleared
NOTIFICATION-TYPE
Radio power amplifier cleared
1.3.6.1.4.1.7262.2.5.11.46current
hzCpTemperatureOutOfLimit
NOTIFICATION-TYPE
Radio temperature out of limits.
1.3.6.1.4.1.7262.2.5.11.47current
hzCpTemperatureOutOfLimitCleared
NOTIFICATION-TYPE
Radio temperature out of limits cleared.
1.3.6.1.4.1.7262.2.5.11.48current
hzCpRedundancyConfigMismatch
NOTIFICATION-TYPE
Redundancy configuration mismatch either with partner or peer. Alarm instance 2 indicates partner and 3 indicates peer.
1.3.6.1.4.1.7262.2.5.11.49current
hzCpRedundancyConfigMismatchCleared
NOTIFICATION-TYPE
Redundancy configuration mismatch is cleared. Alarm instance 2 indicates partner and 3 indicates peer.
1.3.6.1.4.1.7262.2.5.11.50current
hzCpRedundancyActiveOnSecondary
NOTIFICATION-TYPE
Secondary unit is processing the user traffic.
1.3.6.1.4.1.7262.2.5.11.51current
hzCpRedundancyActiveOnSecondaryCleared
NOTIFICATION-TYPE
Secondary unit processing the user traffic condition is cleared.
1.3.6.1.4.1.7262.2.5.11.52current
hzCpRedundancyOperatingInForcedSwitch
NOTIFICATION-TYPE
Redundancy operating in either forced-active or forced-standby switch mode.
1.3.6.1.4.1.7262.2.5.11.53current
hzCpRedundancyOperatingInForcedSwitchCleared
NOTIFICATION-TYPE
Redundancy operating in either forced-active or forced-standby switch mode condition is cleared.
1.3.6.1.4.1.7262.2.5.11.54current
hzCpRedundancyEnetCrossLinkCleared
NOTIFICATION-TYPE
Redundancy cross link is cleared.
1.3.6.1.4.1.7262.2.5.11.56current
hzCpRedundancyActiveUsingPartnerWLinkCleared
NOTIFICATION-TYPE
Active node using partner wireless link condition is cleared.
1.3.6.1.4.1.7262.2.5.11.58current
hzCpRedundancyStandbyWLinkInUse
NOTIFICATION-TYPE
This alarm is raised on the standby node (primary or secondary) when it's radio is used by the partner node for transporting the data to the other end of the link.
1.3.6.1.4.1.7262.2.5.11.59current
hzCpRedundancyStandbyWLinkInUseCleared
NOTIFICATION-TYPE
Standby node wirless link is not used by the partner any more.
1.3.6.1.4.1.7262.2.5.11.60current
hzCpRedundancyStandbyOnPrimary
NOTIFICATION-TYPE
Primary node is in standby mode.
1.3.6.1.4.1.7262.2.5.11.61current
hzCpRedundancyStandbyOnPrimaryCleared
NOTIFICATION-TYPE
Primary node in standby condition is cleared.
1.3.6.1.4.1.7262.2.5.11.62current
hzCpX2DeliveringHalfCapacity
NOTIFICATION-TYPE
X2 operation is using single wireless link. System throughput is reduced to half.
1.3.6.1.4.1.7262.2.5.11.63current
hzCpX2DeliveringHalfCapacityCleared
NOTIFICATION-TYPE
X2 operation is back to two wireless links.
1.3.6.1.4.1.7262.2.5.11.64current
hzCpBncCableSignalNotDetected
NOTIFICATION-TYPE
BNC signal is not detected. The cable may be disconnected.
1.3.6.1.4.1.7262.2.5.11.65current
hzCpBncCableSignalNotDetectedCleared
NOTIFICATION-TYPE
BNC signal error condition is cleared.
1.3.6.1.4.1.7262.2.5.11.66current
hzCpEthernetSpeedReduced
NOTIFICATION-TYPE
Ethernet Speed negotiated below the Max Speed.
1.3.6.1.4.1.7262.2.5.11.67current
hzCpEthernetSpeedReducedCleared
NOTIFICATION-TYPE
Ethernet speed is set back to Max Speed.
1.3.6.1.4.1.7262.2.5.11.68current
hzCpSynceLostLock
NOTIFICATION-TYPE
Synce clock PLL lost lock
1.3.6.1.4.1.7262.2.5.11.69current
hzCpSynceLostLockCleared
NOTIFICATION-TYPE
Synce clock PLL restored from lost of lock
1.3.6.1.4.1.7262.2.5.11.70current
hzCpSynceSecondarySourceInUse
NOTIFICATION-TYPE
Synce clock selected secondary source
1.3.6.1.4.1.7262.2.5.11.71current
hzCpSynceSecondarySourceInUseCleared
NOTIFICATION-TYPE
Synce clock selected primary source
1.3.6.1.4.1.7262.2.5.11.72current
hzCpUserSession
NOTIFICATION-TYPE
A person has logged in to an ascii management port (telnet, local management port, or HTTP). The username is included in the Trap.
1.3.6.1.4.1.7262.2.5.11.73current
hzCpUserSessionCleared
NOTIFICATION-TYPE
A person has logged out of an ascii management port (telnet, local management port, or HTTP). The username is included in the Trap.
1.3.6.1.4.1.7262.2.5.11.74current
hzCpInvalidSystemConfig
NOTIFICATION-TYPE
Overall system Configuration is not valid.
1.3.6.1.4.1.7262.2.5.11.75current
hzCpInvalidSystemConfigCleared
NOTIFICATION-TYPE
System configuration is valid.
1.3.6.1.4.1.7262.2.5.11.76current
hzCpMibChangeNotSaved
NOTIFICATION-TYPE
Mib has been changed but not saved.
1.3.6.1.4.1.7262.2.5.11.77current
hzCpMibChangeNotSavedCleared
NOTIFICATION-TYPE
Mib has been saved.
1.3.6.1.4.1.7262.2.5.11.78current
hzCpTransmitterLossOfSync
NOTIFICATION-TYPE
System has detected an internal fault.
1.3.6.1.4.1.7262.2.5.11.79current
hzCpTransmitterLossOfSyncCleared
NOTIFICATION-TYPE
Internal fault has cleared.
1.3.6.1.4.1.7262.2.5.11.80current
hzCpRadioLinearityCalError
NOTIFICATION-TYPE
Radio linearity calibration error.
1.3.6.1.4.1.7262.2.5.11.81current
hzCpRadioLinearityCalErrorCleared
NOTIFICATION-TYPE
Radio linearity calibration error is cleared.
1.3.6.1.4.1.7262.2.5.11.82current
hzCpSynceConfigMismatch
NOTIFICATION-TYPE
Synce configuration mismatch with peer.
1.3.6.1.4.1.7262.2.5.11.83current
hzCpSynceConfigMismatchCleared
NOTIFICATION-TYPE
Synce configuration mismatch is cleared.
1.3.6.1.4.1.7262.2.5.11.84current
hzCpCryptoPowerUpTestsFailed
NOTIFICATION-TYPE
Crypto power up tests failed.
1.3.6.1.4.1.7262.2.5.11.85current
hzCpCryptoConfigMismatch
NOTIFICATION-TYPE
Crypto configuration mismatch either with partner or peer. Alarm instance 2 indicates partner and 3 indicates peer.
1.3.6.1.4.1.7262.2.5.11.86current
hzCpCryptoConfigMismatchCleared
NOTIFICATION-TYPE
Crypto configuration mismatch is cleared. Alarm instance 2 indicates partner and 3 indicates peer.
1.3.6.1.4.1.7262.2.5.11.87current
hzCpSystemTimeChange
NOTIFICATION-TYPE
System Date Time changed
1.3.6.1.4.1.7262.2.5.11.88current
hzCpCodeCheck
NOTIFICATION-TYPE
A code check correction event has occured in the system.
1.3.6.1.4.1.7262.2.5.11.89current
hzCpConfigChanged
NOTIFICATION-TYPE
1.3.6.1.4.1.7262.2.5.11.90current