DLINKSW-SWITCHPORT-MIB
- Registered at
- 1.3.6.1.4.1.171.14.11
- Last updated
- 2013-03-04 00:00
- Organization
- D-Link Corp.
- Revisions
- 2013-03-04 00:00
- Namespace
- dlink
- Source file
DLINKSW-SWITCHPORT-MIB- Digest
sha256:33b11c21201766acffc0eae9d0f29143a9849756313edc63fe94cebb61dd8a80
Description
This MIB module defines objects for per-port configuration which are not covered by standard MIB(s).
Contact
D-Link Corporation Postal: No. 289, Sinhu 3rd Rd., Neihu District, Taipei City 114, Taiwan, R.O.C Tel: +886-2-66000123 E-mail: tsd@dlink.com.tw
Imports
| From | Symbols |
|---|---|
| DLINK-ID-REC-MIB | dlinkIndustrialCommon |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
DLINK-ID-REC-MIB DLINKSW-SWITCHPORT-MIB IANAifType-MIB IF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| dSwPortNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.171.14.11.0 | |||
| dSwPortObjects OBJECT-IDENTITY | 1.3.6.1.4.1.171.14.11.1 | |||
| dSwPortIfTable OBJECT-TYPE A list of physical port interface entries. | 1.3.6.1.4.1.171.14.11.1.1 | not-accessible | current | |
| dSwPortIfEntry OBJECT-TYPE An entry in dSwPortIfTable contains port-specific configuration which cannot be covered by standard MIBs (EtherLike or MAU-MIB). | 1.3.6.1.4.1.171.14.11.1.1.1 | not-accessible | current | |
| dSwPortIfB1000baseTCtrl OBJECT-TYPE This object can be modified when port speed is configured to 1000BASE-T. other(1) - the port is not 1000BASE-T or master/slave timing mode is not specified. b1000baseTMaster(2) - configure the port operate as master timing. b1000baseTSlave(3) - configure the port operate as slave timing. | 1.3.6.1.4.1.171.14.11.1.1.1.1 | INTEGER {other(1), b1000baseTMaster(2), b1000baseTSlave(3)} | read-write | current |
| dSwPortIfB10GbaseTCtrl OBJECT-TYPE This object can be modified when port speed is configured to 10GBASE-T. other(1) - the port is not 10GBASE-T or master/slave timing mode is not specified. b10GbaseTMaster(2) - configure the port operate as master timing. b10GbaseTSlave(3) - configure the port operate as slave timing. | 1.3.6.1.4.1.171.14.11.1.1.1.2 | INTEGER {other(1), b10GbaseTMaster(2), b10GbaseTSlave(3)} | read-write | current |
| dSwPortIfMdix OBJECT-TYPE Uses the object to configure the state of Media-Dependent Interface Crossover (MDIX) of the port. | 1.3.6.1.4.1.171.14.11.1.1.1.3 | INTEGER {auto(1), normal(2), cross(3)} | read-write | current |
| dSwPortIfJumboFrameSize OBJECT-TYPE The size of the largest packet which can be received on the interface, specified in octets. | 1.3.6.1.4.1.171.14.11.1.1.1.4 | Unsigned32 | read-write | current |
| dSwPortIfSpeedAutoDowngrade OBJECT-TYPE This object indicates whether automatically downgrade the advertised speed in case a link cannot be established at the available speed. | 1.3.6.1.4.1.171.14.11.1.1.1.5 | TruthValue | read-write | current |
| dSwPortConformance OBJECT-IDENTITY | 1.3.6.1.4.1.171.14.11.2 | |||
| dSwPortCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.171.14.11.2.1 | |||
| dSwPortGroups OBJECT-IDENTITY | 1.3.6.1.4.1.171.14.11.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| dSwPortCompliance MODULE-COMPLIANCE The compliance statement for entities which implement the DLINKSW-SWITCHPORT-MIB. | 1.3.6.1.4.1.171.14.11.2.1.1 | current |
| dSwPortBasicGroup OBJECT-GROUP This group contains the collection of fundamental port configuration objects which are not covered by standard MIBs. | 1.3.6.1.4.1.171.14.11.2.2.1 | current |