DLINKSW-POE-MIB
- Registered at
- 1.3.6.1.4.1.171.14.24
- Last updated
- 2017-03-15 00:00
- Organization
- D-Link Corp.
- Revisions
- 2013-05-29 00:00, 2013-09-24 00:00, 2017-03-15 00:00
- Namespace
- dlink
- Source file
DLINKSW-POE-MIB- Digest
sha256:206484fe8929877eee375ecc06d1acf08db819516ae8b4fd71f5acfcd17744bc
Description
A MIB module for extending POWER-ETHERNET-MIB specified in RFC 3621.
Contact
D-Link Corporation Postal: No. 289, Sinhu 3rd Rd., Neihu District, Taipei City 114, Taiwan, R.O.C Tel: +886-2-66000123 E-mail: tsd@dlink.com.tw
Imports
| From | Symbols |
|---|---|
| DLINK-ID-REC-MIB | dlinkIndustrialCommon |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| POWER-ETHERNET-MIB | pethMainPseGroupIndex, pethPsePortIndex, pethPsePortOverLoadCounter, pethPsePortPowerDeniedCounter, pethPsePortShortCounter |
| Q-BRIDGE-MIB | PortList |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BRIDGE-MIB DLINK-ID-REC-MIB DLINKSW-POE-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB P-BRIDGE-MIB POWER-ETHERNET-MIB Q-BRIDGE-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| dPoeMIBNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.171.14.24.0 | |||
| dPoeMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.171.14.24.1 | |||
| dPoeGroupCfgTable OBJECT-TYPE This table consists of a list of group configurations for PoE. Group means box in the stack or module in a rack. For non-modular devices, the pethMainPseGroupIndex is 1. | 1.3.6.1.4.1.171.14.24.1.1 | not-accessible | current | |
| dPoeGroupCfgEntry OBJECT-TYPE An entry contains the system configuration of the PoE on a group. | 1.3.6.1.4.1.171.14.24.1.1.1 | not-accessible | current | |
| dPoeGroupPolicyPreempt OBJECT-TYPE This object configures whether to disconnect the PD which is powered with lower priority in order to release the power to the new connected PD with higher priority under power shortage condition. If this object is 'false', then the policy is first in first serviced. Thus the new PD will not be serviced if the power budget is running out. If this object is 'true', then the power provisioned to PD with lower priority can be preempted to release the power to the new connected PD with higher priority. | 1.3.6.1.4.1.171.14.24.1.1.1.1 | TruthValue | read-write | current |
| dPoeGroupClearIfStatistic OBJECT-TYPE This object is used to clear the PoE statistics of pethPsePortEntry for specified ports. | 1.3.6.1.4.1.171.14.24.1.1.1.2 | PortList | read-write | current |
| dPoeGroupIfLedMode OBJECT-TYPE For some devices,port LED can indicate either poe status or link status. This object is used to configure or display port LED mode. poeMode(1) - indicates poe status. linkMode(2) - indicates link status. For other devices have LEDs to indicate poe status and link status separately, this object only can get value of invalid(3) to mean this node is meaningless. | 1.3.6.1.4.1.171.14.24.1.1.1.3 | INTEGER {poeMode(1), linkMode(2), invalid(3)} | read-write | current |
| dPoeGroupInfoTable OBJECT-TYPE This table consists of a list of PoE information for groups. | 1.3.6.1.4.1.171.14.24.1.2 | not-accessible | current | |
| dPoeGroupInfoEntry OBJECT-TYPE An entry contains the system information of the PoE on a group. | 1.3.6.1.4.1.171.14.24.1.2.1 | not-accessible | current | |
| dPoeGroupMaxPorts OBJECT-TYPE This object indicates the maximum number of ports that the group can support. | 1.3.6.1.4.1.171.14.24.1.2.1.1 | Integer32 | read-only | current |
| dPoeGroupHWVersion OBJECT-TYPE This object indicates H/W version of PoE chip. | 1.3.6.1.4.1.171.14.24.1.2.1.2 | DisplayString | read-only | current |
| dPoeGroupSWVersion OBJECT-TYPE This object indicates firmware version of PoE chip. | 1.3.6.1.4.1.171.14.24.1.2.1.3 | DisplayString | read-only | current |
| dPoeIfObjects OBJECT-IDENTITY | 1.3.6.1.4.1.171.14.24.1.3 | |||
| dPoeIfCfgTable OBJECT-TYPE This table consists of a list of PoE configuration information for ports. | 1.3.6.1.4.1.171.14.24.1.3.1 | not-accessible | current | |
| dPoeIfCfgEntry OBJECT-TYPE An entry contains PoE configuration on a port. | 1.3.6.1.4.1.171.14.24.1.3.1.1 | not-accessible | current | |
| dPoeIfState OBJECT-TYPE This object indicates the PoE state of the entry. auto(1) - the port will automatically detect the PD and provision power to the PD. The max wattage value which can be provisioned to the port is determined by dPoeIfMaxPower. If dPoeIfMaxPower is unspecified, then the class of the PD auto determines the maximum wattage which can be provisioned. The PD will not be provisioned if it requests more wattage than the max wattage which is determined. never(2) - indicates the port will not supply power to connected PD; static(3) - indicates manager pre-allocate power budget to the port by configuring the dPoeIfMaxPower object. The power budget is allocated to the port even though there is no PD connected to the port. If dPoeIfMaxPower is not configured, default value is 15400mW for 802.3af and 30000mW for 802.3at. | 1.3.6.1.4.1.171.14.24.1.3.1.1.1 | INTEGER {auto(1), never(2), static(3)} | read-write | current |
| dPoeIfMaxPower OBJECT-TYPE This object indicates the max wattage value which can be provisioned to the port. Note: This object is valid only while the dPoeIfState object is configured as auto or static. | 1.3.6.1.4.1.171.14.24.1.3.1.1.2 | Integer32 (0 | 1000..30000) | read-write | current |
| dPoeIfTimeRange OBJECT-TYPE This object indicates the name of time-range profile to delineate the activation period. A zero length string indicates the time-range is not specified. Note: This object is valid only while the dPoeIfState is 'auto'. | 1.3.6.1.4.1.171.14.24.1.3.1.1.3 | DisplayString (SIZE(0..32)) | read-write | current |
| dPoeIfLegacyPdEnabled OBJECT-TYPE This object indicates the state of legacy PD support. | 1.3.6.1.4.1.171.14.24.1.3.1.1.4 | TruthValue | read-write | current |
| dPoeIfInfoObjects OBJECT-IDENTITY | 1.3.6.1.4.1.171.14.24.1.3.2 | |||
| dPoeIfStatusTable OBJECT-TYPE This table consists of a list of PoE status for ports. | 1.3.6.1.4.1.171.14.24.1.3.2.1 | not-accessible | current | |
| dPoeIfStatusEntry OBJECT-TYPE An entry consists of PoE status for a port. | 1.3.6.1.4.1.171.14.24.1.3.2.1.1 | not-accessible | current | |
| dPoeIfDetectStatus OBJECT-TYPE This object indicates the operational status of the port PD detection. disabled(1) - PSE function is disabled. searching(2) - Remote PD is not connected. requesting(3) - Remote PD is inserted, but the PSE doesn't provide power yet. delivering(4) - Remote PD is now powering by PoE system. faulty(5) - Device detection or a powered device is in a faulty state. | 1.3.6.1.4.1.171.14.24.1.3.2.1.1.1 | INTEGER {disabled(1), searching(2), requesting(3), delivering(4), faulty(5)} | read-only | current |
| dPoeIfFaultyType OBJECT-TYPE This object indicates the specific faulty type. It is meaningful only when dPoeIfDetectStatus object is 'faulty'. notApplicable(0) - indicates this object is meaningless, e.g. the dPoeIfDetectStatus is not 'faulty'. mpsAbsent(1) - indicates MPS(Maintain Power Signature) Absent pdShort(2) - indicates PD Short overload(3) - indicates Overload powerDenied(4) - indicates Power Denied thermalShutdown(5)- indicates Thermal Shutdown startupFailure(6) - indicates Startup Failure classificationFailure(7) - indicates Classification Failure(IEEE 802.3at) | 1.3.6.1.4.1.171.14.24.1.3.2.1.1.2 | INTEGER {notApplicable(0), mpsAbsent(1), pdShort(2), overload(3), powerDenied(4), thermalShutdown(5), startupFailure(6), classificationFailure(7)} | read-only | current |
| dPoeIfMeasurementTable OBJECT-TYPE This table consists of a list of POE measurement information for ports. | 1.3.6.1.4.1.171.14.24.1.3.2.2 | not-accessible | current | |
| dPoeIfMeasurementEntry OBJECT-TYPE An entry consists of PoE measurement information of a port. | 1.3.6.1.4.1.171.14.24.1.3.2.2.1 | not-accessible | current | |
| dPoeIfVoltage OBJECT-TYPE This object indicates the voltage of the port in millivolts. | 1.3.6.1.4.1.171.14.24.1.3.2.2.1.1 | Integer32 | read-only | current |
| dPoeIfCurrent OBJECT-TYPE This object indicates the current of port in milliamperes. | 1.3.6.1.4.1.171.14.24.1.3.2.2.1.2 | Integer32 | read-only | current |
| dPoeIfTemperature OBJECT-TYPE This object indicates the temperature of port in degrees centigrade. | 1.3.6.1.4.1.171.14.24.1.3.2.2.1.3 | Integer32 | read-only | current |
| dPoeIfPower OBJECT-TYPE This object indicates consumption power of port in milliwatts. | 1.3.6.1.4.1.171.14.24.1.3.2.2.1.4 | Integer32 | read-only | current |
| dPoeIfPdAliveCfgTable OBJECT-TYPE This table consists of a list of configuration for the PD alive check function for ports. The PD alive check feature provides the solution for PD device that has the stop working or no response problem via Ping mechanism. Detailed Process: The detailed processes are described as follows: 1. The system needs to periodically monitor the specific PD by using Ping function. If there is no response, system takes one of the following actions: (1) Reset: Switch resets (disable then enable) PoE power on the port which connects to a PD under monitoring. (2) Notify: Switch sends logs and traps to notify the administrator. (3) Both: Switch sends logs and traps, and resets the PoE port power. 2. The system should implement the retry mechanism to check PD aliveness, hence the system will reset the PoE port power feeding after the retry by using Ping without any response from a PD. 3. If the action is Reset or Both, the system needs to wait for PD recovery from rebooting and then executes the Ping function again. Besides, the waiting time can be configured by users. 4. If PoE schedule (time range) function is configured on the port which enables the PD Alive Check function, the time range function has the top priority, and therefore PD Alive Check function will not work while PoE time range function is still active. 5. This function only takes effect on PoE enabled port with power feeding. Note: It is required to setup IP settings properly that the PD can be reachable for Ping, otherwise this function cannot work as expected. Limitation 1. Support Ping Function: If the PD does not support ICMP, this function cannot work normally. 2. Direct-Connected PD: The Reset Action can only work on the direct-connected PD. If the PD is not connected directly, the Reset Action may not work as expected. 3. PD Also Acts as PSE: If the direct-connected PD is also a PSE, all the next level PDs connect to this PSE will be power cycling whenever PD Alive Check function takes effect on 'Reset' or 'Both' Action. | 1.3.6.1.4.1.171.14.24.1.3.3 | not-accessible | current | |
| dPoeIfPdAliveCfgEntry OBJECT-TYPE An entry contains configuration for PD alive check on a port. | 1.3.6.1.4.1.171.14.24.1.3.3.1 | not-accessible | current | |
| dPoeIfPdAliveCfgState OBJECT-TYPE This object indicates the the PD alive function sate. enabled - Enable the PD alive check function disabled - Disable the PD alive check function. | 1.3.6.1.4.1.171.14.24.1.3.3.1.1 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| dPoeIfPdAliveCfgPdIpType OBJECT-TYPE This object indicates the IP address type of the target PD. | 1.3.6.1.4.1.171.14.24.1.3.3.1.2 | InetAddressType | read-write | current |
| dPoeIfPdAliveCfgPdIpAddr OBJECT-TYPE This object indicates the IP address of the target PD. | 1.3.6.1.4.1.171.14.24.1.3.3.1.3 | InetAddress | read-write | current |
| dPoeIfPdAliveCfgInterval OBJECT-TYPE This object indicates the time interval for system issues ping request to detect the target PD. The valid range for interval time is 10s to 300s. | 1.3.6.1.4.1.171.14.24.1.3.3.1.4 | Unsigned32 (10..300) | read-write | current |
| dPoeIfPdAliveCfgRetry OBJECT-TYPE This object indicates the retry count of ping request when PD has no response. The valid range for retry count is 0 to 5 times. | 1.3.6.1.4.1.171.14.24.1.3.3.1.5 | Unsigned32 (0..5) | read-write | current |
| dPoeIfPdAliveCfgWaitTime OBJECT-TYPE This object indicates the waiting time for PD reboot. The valid range for waiting time is 30s to 300s. | 1.3.6.1.4.1.171.14.24.1.3.3.1.6 | Unsigned32 (30..300) | read-write | current |
| dPoeIfPdAliveCfgAction OBJECT-TYPE This object indicates the action when PD doesn't reply the ping request. reset- System will reset the PoE port state . notify- System will send log and trap to notify the administrator. both- System will send log and trap first and reset the PoE port state. | 1.3.6.1.4.1.171.14.24.1.3.3.1.7 | INTEGER {reset(1), notify(2), both(3)} | read-write | current |
| dPoeMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.171.14.24.2 | |||
| dPoeMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.171.14.24.2.1 | |||
| dPoeMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.171.14.24.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| dPoeIfPowerDeniedNotification NOTIFICATION-TYPE This Notification indicates if PSE state diagram enters the state POWER_DENIED. At least 500 msec must elapse between notifications being emitted by the same object instance. | 1.3.6.1.4.1.171.14.24.0.1 | current |
| dPoeIfPowerOverLoadNotification NOTIFICATION-TYPE This Notification indicates if PSE state diagram enters the state ERROR_DELAY_OVER. At least 500 msec must elapse between notifications being emitted by the same object instance. | 1.3.6.1.4.1.171.14.24.0.2 | current |
| dPoeIfPowerShortCircuitNotification NOTIFICATION-TYPE This Notification indicates if PSE state diagram enters the state ERROR_DELAY_SHORT. At least 500 msec must elapse between notifications being emitted by the same object instance. | 1.3.6.1.4.1.171.14.24.0.3 | current |
| dPoeIfPdAliveFailOccurNotification NOTIFICATION-TYPE This Notification indicates if the PD device has the stop working or no response problem. | 1.3.6.1.4.1.171.14.24.0.4 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| dPoeMIBCompliance MODULE-COMPLIANCE The compliance statement for entities which implement the DLINKSW-POE-MIB. | 1.3.6.1.4.1.171.14.24.2.1.1 | current |
| dPoeGroupCfgGroup OBJECT-GROUP A collection of objects to configure or display the group-specific PoE information. | 1.3.6.1.4.1.171.14.24.2.2.1 | current |
| dPoeIfCfgGroup OBJECT-GROUP A collection of objects configure or display the ports information. | 1.3.6.1.4.1.171.14.24.2.2.2 | current |
| dPoeGroupInfoGroup OBJECT-GROUP A collection of objects display the groups information. | 1.3.6.1.4.1.171.14.24.2.2.3 | current |
| dPoeIfInfoGroup OBJECT-GROUP A collection of objects display the ports information. | 1.3.6.1.4.1.171.14.24.2.2.4 | current |
| dPoeIfErrorStateNotificationGroup NOTIFICATION-GROUP A collection of objects provides ports error state notifications. | 1.3.6.1.4.1.171.14.24.2.2.5 | current |
| dPoeIfPdAliveCfgGroup OBJECT-GROUP A collection of objects display the PD alive check configuration. | 1.3.6.1.4.1.171.14.24.2.2.6 | current |