MIBs Depot

DLINKSW-ERROR-DISABLE-MIB

Registered at
1.3.6.1.4.1.171.14.45
Last updated
2013-07-08 00:00
Organization
D-Link Corp.
Revisions
2013-05-02 00:00, 2013-07-08 00:00, 2014-04-11 00:00
Namespace
dlink
Source file
DLINKSW-ERROR-DISABLE-MIB
Digest
sha256:8eeca227362e1084f0e752b497e94d334381e2d4acf5d2c501d6d8ae256735b6

Description

This MIB module defines objects for error disabled.

Contact

D-Link Corporation Postal: No. 289, Sinhu 3rd Rd., Neihu District, Taipei City 114, Taiwan, R.O.C Tel: +886-2-66000123 E-mail: tsd@dlink.com.tw

Imports

FromSymbols
DLINK-ID-REC-MIBdlinkIndustrialCommon
IF-MIBInterfaceIndex
Q-BRIDGE-MIBVlanId, VlanIdOrNone
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
DLINK-ID-REC-MIB
DLINKSW-ERROR-DISABLE-MIB
IANAifType-MIB
IF-MIB
P-BRIDGE-MIB
Q-BRIDGE-MIB
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
TOKEN-RING-RMON-MIB

Textual conventions

NameOIDSyntaxAccessStatus
DErrDisReasonID
TEXTUAL-CONVENTION
An integer-value assigned to various conditions that can error disable a system entity. loopbackDetect: Loopback Detection l2ptGuard: L2 Protocol Tunneling. psecureViolation: Port Security violation. stormControl: (broadcast/multicast/unicast)storm control. bpduProtect: BPDU protected. arpRateLimit: ARP rate limit. dhcpRateLimit: DHCP rate limit. ddm: Digital Diagnostics Monitoring scheduledShutdown: Scheduled Port-shutdown by Power Saving scheduledHibernation:Scheduled Hibernation by Power Saving
current

Objects

NameOIDSyntaxAccessStatus
dErrDisableMIBNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.171.14.45.0
dErrDisableMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.171.14.45.1
dErrDisRecoveryTable
OBJECT-TYPE
This table contains the recovery mechanism for the features with error-disable functionality. Transceiver monitoring module (the DErrDisReasonID is 'ddm') can also put a SFP port which is in abnormal status in error disabled state. This error disable cannot be auto recovered but can only be manually recovered. As a result, there is no entry for error cause is 'ddm' in this table.
1.3.6.1.4.1.171.14.45.1.1not-accessiblecurrent
dErrDisRecoveryEntry
OBJECT-TYPE
An entry is created for each feature which has error-disable functionality.
1.3.6.1.4.1.171.14.45.1.1.1not-accessiblecurrent
dErrDisRecoveryIndex
OBJECT-TYPE
This object indicates the cause of error-disable.
1.3.6.1.4.1.171.14.45.1.1.1.1DErrDisReasonIDnot-accessiblecurrent
dErrDisRecoveryEnable
OBJECT-TYPE
This object specifies whether the system can automatically recover a system entity that has been disabled by the cause.
1.3.6.1.4.1.171.14.45.1.1.1.2TruthValueread-writecurrent
dErrDisRecoveryInterval
OBJECT-TYPE
Specifies the error-recovery time interval on specific cause to recover the port/interface from the error disabled situation.
1.3.6.1.4.1.171.14.45.1.1.1.3Integer32 (5..86400)read-writecurrent
dErrDisIfStatusTableNum
OBJECT-TYPE
Indicates the number of entries present in the dErrDisIfStatusTable.
1.3.6.1.4.1.171.14.45.1.2Unsigned32read-onlycurrent
dErrDisIfStatusTable
OBJECT-TYPE
This table provides next recovery timeout information about an interface disabled by a feature.
1.3.6.1.4.1.171.14.45.1.3not-accessiblecurrent
dErrDisIfStatusEntry
OBJECT-TYPE
An entry indicates next recovery timeout information about an interface or (interface, vlan) disabled by a feature.
1.3.6.1.4.1.171.14.45.1.3.1not-accessiblecurrent
dErrDisIfStatusIfIndex
OBJECT-TYPE
This object is the interface index of the interface disabled by a feature.
1.3.6.1.4.1.171.14.45.1.3.1.1InterfaceIndexnot-accessiblecurrent
dErrDisIfStatusVlanIndex
OBJECT-TYPE
This object indicates the VLAN in the given interface that has been error-disabled. If the physical interface is error-disabled then the value of this object is 0.
1.3.6.1.4.1.171.14.45.1.3.1.2VlanIdOrNonenot-accessiblecurrent
dErrDisIfStatusDisReasonIndex
OBJECT-TYPE
This object indicates the reason which cause the interface disabled.
1.3.6.1.4.1.171.14.45.1.3.1.3DErrDisReasonIDnot-accessiblecurrent
dErrDisIfStatusTimeLeft
OBJECT-TYPE
This object indicates the time left that the interface will be automatically recovered. Value 0xFFFFFFFF indicates the interface won't be automatically recovered.
1.3.6.1.4.1.171.14.45.1.3.1.4Unsigned32read-onlycurrent
dErrDisNotificationEnable
OBJECT-TYPE
This object indicates whether a specified notification is enabled or not. If a bit corresponding to a notification is set to 1, then the specified notification can be generated. errDisableAsserted(0) - Controls the notifications for a port/vlan entering into error disabled state. errDisableCleared(1) - Controls the notifications for a port/vlan exiting from error disabled state.
1.3.6.1.4.1.171.14.45.1.4Bits {errDisableAsserted(0), errDisableCleared(1)}read-writecurrent
dErrDisNotifRate
OBJECT-TYPE
Expressed in the number of notifications can be generated per minute. This object configures the rate-limit of SNMP Notification for errDisable feature. A value of 0 indicates that an SNMP Notification is generated for every error disabled event.
1.3.6.1.4.1.171.14.45.1.5Unsigned32 (0..1000)read-writecurrent
dErrDisNotifyInfo
OBJECT-IDENTITY
1.3.6.1.4.1.171.14.45.1.6
dErrDisNotifyInfoPortIfIndex
OBJECT-TYPE
This object indicates the port number of error disabled port.
1.3.6.1.4.1.171.14.45.1.6.1InterfaceIndexaccessible-for-notifycurrent
dErrDisNotifyInfoLoopDetectedVID
OBJECT-TYPE
This object indicates the VLAN ID that has detected a loopback.
1.3.6.1.4.1.171.14.45.1.6.2VlanIdaccessible-for-notifycurrent
dErrDisNotifyInfoReasonID
OBJECT-TYPE
This object indicates the condition which cause a port/vlan enter into error disabled state.
1.3.6.1.4.1.171.14.45.1.6.3DErrDisReasonIDaccessible-for-notifycurrent
dErrDisableMIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.171.14.45.2
dErrDisMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.171.14.45.2.1
dErrDisMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.171.14.45.2.2

Notifications

NameOIDStatus
dErrDisNotifyPortDisabledAssert
NOTIFICATION-TYPE
The trap is sent when a port enters into error disabled state.
1.3.6.1.4.1.171.14.45.0.1current
dErrDisNotifyPortDisabledClear
NOTIFICATION-TYPE
The trap is sent when a port loop restarts after the interval time.
1.3.6.1.4.1.171.14.45.0.2current
dErrDisNotifyVlanDisabledAssert
NOTIFICATION-TYPE
The trap is sent when a Port with a VID loop occurs.
1.3.6.1.4.1.171.14.45.0.3current
dErrDisNotifyVlanDisabledClear
NOTIFICATION-TYPE
The trap is sent when a Port with a VID restarts after the interval time.
1.3.6.1.4.1.171.14.45.0.4current

Conformance

NameOIDStatus
dErrDisMIBCompliance
MODULE-COMPLIANCE
The compliance statement for entities which implement the DLINKSW-ERROR-DISABLE-MIB.
1.3.6.1.4.1.171.14.45.2.1.1current
dErrDisRecoveryCfgGroup
OBJECT-GROUP
A collection of objects to configure the error recovery of the error-disable feature.
1.3.6.1.4.1.171.14.45.2.2.1current
dErrDisIfStatusGroup
OBJECT-GROUP
A collection of objects which indicate error-disable interface status.
1.3.6.1.4.1.171.14.45.2.2.2current
dErrDisNotifyCfgGroup
OBJECT-GROUP
A collection of objects to configure the error recovery of the error-disable feature.
1.3.6.1.4.1.171.14.45.2.2.3current
dErrDisNotificationGroup
NOTIFICATION-GROUP
The collection of notifications used for monitoring ErrDisable status
1.3.6.1.4.1.171.14.45.2.2.4current