DLINKSW-ENTITY-EXT-MIB
- Registered at
- 1.3.6.1.4.1.171.14.5
- Last updated
- 2013-09-06 00:00
- Organization
- D-Link Corp.
- Revisions
- 2013-09-06 00:00, 2013-03-13 00:00
- Namespace
- dlink
- Source file
DLINKSW-ENTITY-EXT-MIB- Digest
sha256:6bf7b540a123f22875344496c7fd4d61de567cfa45190c2fafa5e444f2b8194a
Description
This MIB module provides essential information about the system and defines the managed objects that support the monitoring of alarms generated by physical entities, including temperature sensors, fans and power supplies.
Contact
D-Link Corporation Postal: No. 289, Sinhu 3rd Rd., Neihu District, Taipei City 114, Taiwan, R.O.C Tel: +886-2-66000123 E-mail: tsd@dlink.com.tw
Imports
| From | Symbols |
|---|---|
| DLINK-ID-REC-MIB | dlinkIndustrialCommon |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
DLINK-ID-REC-MIB DLINKSW-ENTITY-EXT-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| dEntityExtNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.171.14.5.0 | |||
| dEntityExtObjects OBJECT-IDENTITY | 1.3.6.1.4.1.171.14.5.1 | |||
| dEntityExtEnvObjects OBJECT-IDENTITY | 1.3.6.1.4.1.171.14.5.1.1 | |||
| dEntityExtEnvTempTable OBJECT-TYPE The table consists of a list of temperature information. | 1.3.6.1.4.1.171.14.5.1.1.1 | not-accessible | current | |
| dEntityExtEnvTempEntry OBJECT-TYPE An entry represents the temperature status of a testpoint. | 1.3.6.1.4.1.171.14.5.1.1.1.1 | not-accessible | current | |
| dEntityExtEnvTempUnitId OBJECT-TYPE This object indicates the unit (stacking device) or slot (chassis device) ID at which the testpoint is located. | 1.3.6.1.4.1.171.14.5.1.1.1.1.1 | Unsigned32 (1..65535) | not-accessible | current |
| dEntityExtEnvTempIndex OBJECT-TYPE This object is used to uniquely identify the testpoint within a unit/slot. This index is for SNMP purposes only, and has no intrinsic meaning. | 1.3.6.1.4.1.171.14.5.1.1.1.1.2 | Integer32 (1..2147483647) | not-accessible | current |
| dEntityExtEnvTempDescr OBJECT-TYPE This object provides human-sensible identification for the testpoint. e.g. 'Inlet', 'Center', 'Outlet'. | 1.3.6.1.4.1.171.14.5.1.1.1.1.3 | DisplayString (SIZE(0..32)) | read-only | current |
| dEntityExtEnvTempCurrent OBJECT-TYPE This object indicates the current measurement of the testpoint. | 1.3.6.1.4.1.171.14.5.1.1.1.1.4 | Integer32 | read-only | current |
| dEntityExtEnvTempThresholdLow OBJECT-TYPE The object indicates the minimum acceptable reading of the testpoint in degrees Celsius. | 1.3.6.1.4.1.171.14.5.1.1.1.1.5 | Integer32 | read-write | current |
| dEntityExtEnvTempThresholdHigh OBJECT-TYPE The object indicates the maximum acceptable reading of the testpoint in degrees Celsius. | 1.3.6.1.4.1.171.14.5.1.1.1.1.6 | Integer32 | read-write | current |
| dEntityExtEnvTempStatus OBJECT-TYPE The object indicates the current temperature is over the thresholds or not. 'abnormal' indicates the temperature is over the thresholds. 'ok' indicates the temperature is not over the thresholds. | 1.3.6.1.4.1.171.14.5.1.1.1.1.7 | INTEGER {ok(1), abnormal(2)} | read-only | current |
| dEntityExtEnvFanTable OBJECT-TYPE The table is used to display the status of fans. | 1.3.6.1.4.1.171.14.5.1.1.2 | not-accessible | current | |
| dEntityExtEnvFanEntry OBJECT-TYPE An entry represents a fan status. | 1.3.6.1.4.1.171.14.5.1.1.2.1 | not-accessible | current | |
| dEntityExtEnvFanUnitId OBJECT-TYPE This object indicates the unit (stacking device) or slot (chassis device) ID at which the fan is located. | 1.3.6.1.4.1.171.14.5.1.1.2.1.1 | Unsigned32 (1..65535) | not-accessible | current |
| dEntityExtEnvFanIndex OBJECT-TYPE This object is used to uniquely identify the fan within a unit/slot. This index is for SNMP purposes only, and has no intrinsic meaning. | 1.3.6.1.4.1.171.14.5.1.1.2.1.2 | Integer32 (1..2147483647) | not-accessible | current |
| dEntityExtEnvFanDescr OBJECT-TYPE This object provides human-sensible identification for the fan. e.g. 'Left 1' for the first fan on the left. | 1.3.6.1.4.1.171.14.5.1.1.2.1.3 | DisplayString (SIZE(0..32)) | read-only | current |
| dEntityExtEnvFanStatus OBJECT-TYPE This object indicates the fan status. | 1.3.6.1.4.1.171.14.5.1.1.2.1.4 | INTEGER {ok(1), fault(2)} | read-only | current |
| dEntityExtEnvPowerTable OBJECT-TYPE The table is used to display the status of the power modules. | 1.3.6.1.4.1.171.14.5.1.1.3 | not-accessible | current | |
| dEntityExtEnvPowerEntry OBJECT-TYPE An entry contains the information of a power module. | 1.3.6.1.4.1.171.14.5.1.1.3.1 | not-accessible | current | |
| dEntityExtEnvPowerUnitId OBJECT-TYPE This object indicates the unit (stacking device) or slot (chassis device) ID at which the power module is located. | 1.3.6.1.4.1.171.14.5.1.1.3.1.1 | Unsigned32 (1..65535) | not-accessible | current |
| dEntityExtEnvPowerIndex OBJECT-TYPE This object indicates the ID of the power module. This object is used to uniquely identify the power module. This index is for SNMP purposes only, and has no intrinsic meaning. | 1.3.6.1.4.1.171.14.5.1.1.3.1.2 | Unsigned32 (1..2147483647) | not-accessible | current |
| dEntityExtEnvPowerDescr OBJECT-TYPE This object provides human-sensible information for the power module. e.g. '#1 (internal)', '#2 (external)'. | 1.3.6.1.4.1.171.14.5.1.1.3.1.3 | DisplayString (SIZE(0..32)) | read-only | current |
| dEntityExtEnvPowerUsedPower OBJECT-TYPE This object indicates the amount of the power that has been allocated. | 1.3.6.1.4.1.171.14.5.1.1.3.1.4 | Unsigned32 | read-only | current |
| dEntityExtEnvPowerMaxPower OBJECT-TYPE This object indicates maximum power which the power module can supply. | 1.3.6.1.4.1.171.14.5.1.1.3.1.5 | Unsigned32 | read-only | current |
| dEntityExtEnvPowerStatus OBJECT-TYPE This object indicates the status of the power. | 1.3.6.1.4.1.171.14.5.1.1.3.1.6 | INTEGER {inOperation(1), failed(2), empty(3)} | read-only | current |
| dEntityExtEnvAirFlowTable OBJECT-TYPE The table is used to display the status of the air flow function. | 1.3.6.1.4.1.171.14.5.1.1.4 | not-accessible | current | |
| dEntityExtEnvAirFlowEntry OBJECT-TYPE An entry contains the information of the air flow function. | 1.3.6.1.4.1.171.14.5.1.1.4.1 | not-accessible | current | |
| dEntityExtEnvAirFlowUnitId OBJECT-TYPE This object indicates the unit (stacking device) or slot (chassis device) ID at which the air flow module is located. | 1.3.6.1.4.1.171.14.5.1.1.4.1.1 | Unsigned32 (1..65535) | not-accessible | current |
| dEntityExtEnvAirFlowStatus OBJECT-TYPE This object indicates the status of the air flow. The fans' air flow direction must match the system's air flow direction to form an integrated air flow. For example: In DXS-3600, the normal fans' air flow direction must match the power fan's air flow direction. The power fan blow the cold air from outside to inside, all the normal fans must blow the hot air from inside to outside. Or the power fan blow the hot air from inside to outside, all the normal fans must blow the cold air from outside to inside. If one or more fans' air flow direction does not match the system's air flow direction, it will form an abnormal air flow. Then this log message will be triggered. ok(1) : A recover event indicates the air flow back to normal. abnormal(2): An alarm event indicates the air flow detects abnormal. | 1.3.6.1.4.1.171.14.5.1.1.4.1.2 | INTEGER {ok(1), abnormal(2)} | read-only | current |
| dEntityExtEnvTrap OBJECT-IDENTITY | 1.3.6.1.4.1.171.14.5.1.2 | |||
| dEntityExtEnvNotifyEnable OBJECT-TYPE This object indicates whether a specified notification is enabled or not. If a bit corresponding to a notification is set to 1, then the specified notification can be generated. fan(0) - fan trap state for warning fan event (fan failed or fan recover). power(1) - power trap state for warning power event (power failure or power recovery). temperature(2) - temperature trap state for warning temperature event (temperature exceeds the thresholds or temperature recover). | 1.3.6.1.4.1.171.14.5.1.2.1 | Bits {fan(0), power(1), temperature(2)} | read-write | current |
| dEntityExtUnitTable OBJECT-TYPE The table is used to display information of units. | 1.3.6.1.4.1.171.14.5.1.3 | not-accessible | current | |
| dEntityExtUnitEntry OBJECT-TYPE An entry contains essential information of a unit. | 1.3.6.1.4.1.171.14.5.1.3.1 | not-accessible | current | |
| dEntityExtUnitIndex OBJECT-TYPE This object indicates the unit (stacking device) or slot (chassis device) ID. | 1.3.6.1.4.1.171.14.5.1.3.1.1 | Unsigned32 (1..65535) | not-accessible | current |
| dEntityExtUnitStatus OBJECT-TYPE This object represents the status of the unit: ok(1) - This indicates the unit is okay. failed(2) - This indicates the unit fails due to some reason. empty(3) - This indicates that the unit is provisioned but currently not installed. | 1.3.6.1.4.1.171.14.5.1.3.1.2 | INTEGER {ok(1), failed(2), empty(3)} | read-only | current |
| dEntityExtUnitUpTime OBJECT-TYPE This object provides the up time in units of seconds for the unit since it was last re-initialized. | 1.3.6.1.4.1.171.14.5.1.3.1.3 | Unsigned32 | read-only | current |
| dEntityExtMemoryUtilTable OBJECT-TYPE The table is used to display memory utilization information. | 1.3.6.1.4.1.171.14.5.1.4 | not-accessible | current | |
| dEntityExtMemoryUtilEntry OBJECT-TYPE An entry contains memory utilization information. | 1.3.6.1.4.1.171.14.5.1.4.1 | not-accessible | current | |
| dEntityExtMemUtilUnitId OBJECT-TYPE This object indicates the unit (stacking device) or slot (chassis device) ID. | 1.3.6.1.4.1.171.14.5.1.4.1.1 | Integer32 (1..65535) | not-accessible | current |
| dEntityExtMemUtilType OBJECT-TYPE The object indicates the memory type of the entry. | 1.3.6.1.4.1.171.14.5.1.4.1.2 | INTEGER {dram(1), flash(2), nvram(3)} | not-accessible | current |
| dEntityExtMemUtilTotal OBJECT-TYPE This object indicates the total memory size of the entry. | 1.3.6.1.4.1.171.14.5.1.4.1.3 | Unsigned32 | read-only | current |
| dEntityExtMemUtilUsed OBJECT-TYPE This object indicates the used memory size of the entry. | 1.3.6.1.4.1.171.14.5.1.4.1.4 | Unsigned32 | read-only | current |
| dEntityExtMemUtilFree OBJECT-TYPE This object indicates the free memory size of the entry. | 1.3.6.1.4.1.171.14.5.1.4.1.5 | Unsigned32 | read-only | current |
| dEntityExtCpuUtilTable OBJECT-TYPE The table is used to display CPU utilization information. | 1.3.6.1.4.1.171.14.5.1.7 | not-accessible | current | |
| dEntityExtCpuUtilEntry OBJECT-TYPE An entry contains CPU information. | 1.3.6.1.4.1.171.14.5.1.7.1 | not-accessible | current | |
| dEntityExtCpuUtilUnitId OBJECT-TYPE This object indicates the unit (stacking device) or slot (chassis device) ID. | 1.3.6.1.4.1.171.14.5.1.7.1.1 | Unsigned32 (1..65535) | not-accessible | current |
| dEntityExtCpuUtilCpuID OBJECT-TYPE This object is used to uniquely identify the CPU within a unit (multiprocessing system). | 1.3.6.1.4.1.171.14.5.1.7.1.2 | Unsigned32 (1..65535) | not-accessible | current |
| dEntityExtCpuUtilFiveSeconds OBJECT-TYPE This objects indicates the overall CPU busy percentage in the last 5 second period. The value will be between 0% (idle) and 100% (very busy). | 1.3.6.1.4.1.171.14.5.1.7.1.3 | Unsigned32 | read-only | current |
| dEntityExtCpuUtilOneMinute OBJECT-TYPE This objects indicates the overall CPU busy percentage in the last 1 minute period. The value will be between 0% (idle) and 100% (very busy). | 1.3.6.1.4.1.171.14.5.1.7.1.4 | Unsigned32 | read-only | current |
| dEntityExtCpuUtilFiveMinutes OBJECT-TYPE This objects indicates the overall CPU busy percentage in the last 5 minute period. The value will be between 0% (idle) and 100% (very busy). | 1.3.6.1.4.1.171.14.5.1.7.1.5 | Unsigned32 | read-only | current |
| dEntityExtVersionTable OBJECT-TYPE The table is used to display version information of units. | 1.3.6.1.4.1.171.14.5.1.8 | not-accessible | current | |
| dEntityExtVersionEntry OBJECT-TYPE An entry contains version information of a unit. | 1.3.6.1.4.1.171.14.5.1.8.1 | not-accessible | current | |
| dEntityExtVersionUnitId OBJECT-TYPE This object indicates the unit (stacking device) or slot (chassis device) ID. | 1.3.6.1.4.1.171.14.5.1.8.1.1 | Unsigned32 (1..65535) | not-accessible | current |
| dEntityExtVersionBootloader OBJECT-TYPE This object indicates the bootloader version of the unit. | 1.3.6.1.4.1.171.14.5.1.8.1.2 | DisplayString (SIZE(0..32)) | read-only | current |
| dEntityExtVersionRuntime OBJECT-TYPE This object indicates the firmware version of one unit. | 1.3.6.1.4.1.171.14.5.1.8.1.3 | DisplayString (SIZE(0..32)) | read-only | current |
| dEntityExtConformance OBJECT-IDENTITY | 1.3.6.1.4.1.171.14.5.2 | |||
| dEntityExtMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.171.14.5.2.1 | |||
| dEntityExtMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.171.14.5.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| dEntityExtFanStatusChg NOTIFICATION-TYPE This trap indicates a fan fails (dEntityExtEnvFanStatus is 'fault') or recovers (dEntityExtEnvFanStatus is 'ok'). | 1.3.6.1.4.1.171.14.5.0.1 | current |
| dEntityExtThermalStatusChg NOTIFICATION-TYPE This trap indicates a thermal alarms (dEntityExtEnvTempStatus is 'abnormal') or recovers (dEntityExtEnvTempStatus is 'ok'). | 1.3.6.1.4.1.171.14.5.0.2 | current |
| dEntityExtPowerStatusChg NOTIFICATION-TYPE This trap indicates a power module fails, recovers or is removed. | 1.3.6.1.4.1.171.14.5.0.3 | current |
| dEntityExtAirFlowChg NOTIFICATION-TYPE This trap is triggered when the air flow status is changed from 'ok' to 'abnormal' and vice versa. dEntityExtEnvAirFlowStatus indicates the current (new) fan air flow state. | 1.3.6.1.4.1.171.14.5.0.4 | current |
| dEntityExtFactoryResetButton NOTIFICATION-TYPE This trap is triggered when the factory reset button was pressed. | 1.3.6.1.4.1.171.14.5.0.5 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| dEntityExtCompliance MODULE-COMPLIANCE The compliance statement for entities which implement the DLINKSW-ENTITY-EXT-MIB. | 1.3.6.1.4.1.171.14.5.2.1.1 | current |
| dEntityExtTempGroup OBJECT-GROUP A collection of objects provides information of the system temperature. | 1.3.6.1.4.1.171.14.5.2.2.1 | current |
| dEntityExtFanGroup OBJECT-GROUP A collection of objects providing informations of fans. | 1.3.6.1.4.1.171.14.5.2.2.2 | current |
| dEntityExtPowerGroup OBJECT-GROUP A collection of objects providing information of power modules. | 1.3.6.1.4.1.171.14.5.2.2.3 | current |
| dEntityExtSystemInfoGroup OBJECT-GROUP A collection of objects provides information of the system temperature. | 1.3.6.1.4.1.171.14.5.2.2.4 | current |
| dEntityExtGenericNotifInfoGroup OBJECT-GROUP A collection of objects provides generic information for binding variables of notification. | 1.3.6.1.4.1.171.14.5.2.2.5 | current |
| dEntityExtFanNotifGroup NOTIFICATION-GROUP A collection of notifications for indicating the status change of fans. | 1.3.6.1.4.1.171.14.5.2.2.6 | current |
| dEntityExtThermalNotifGroup NOTIFICATION-GROUP A collection of notifications for indicating the status change of thermals. | 1.3.6.1.4.1.171.14.5.2.2.7 | current |
| dEntityExtPowerNotifGroup NOTIFICATION-GROUP A collection of notifications for indicating the status change of power module. | 1.3.6.1.4.1.171.14.5.2.2.8 | current |
| dEntityExtAirFlowNotifGroup NOTIFICATION-GROUP A collection of notifications for indicating the status change of the air flow. | 1.3.6.1.4.1.171.14.5.2.2.9 | current |
| dEntityExtFactoryResetButtonNotifGroup NOTIFICATION-GROUP A collection of notifications for indicating the factory reset button. | 1.3.6.1.4.1.171.14.5.2.2.10 | current |