DLINKSW-CABLE-DIAG-MIB
- Registered at
- 1.3.6.1.4.1.171.14.58
- Last updated
- 2013-01-18 00:00
- Organization
- D-Link Corp.
- Revisions
- 2013-01-18 00:00
- Namespace
- dlink
- Source file
DLINKSW-CABLE-DIAG-MIB- Digest
sha256:50d2fc77c094dc5a832ab63aace4aad0d067fe35673d42f49c6a1baaf3a2162e
Description
The MIB module for determining the status of the cables attached to the device.
Contact
D-Link Corporation Postal: No. 289, Sinhu 3rd Rd., Neihu District, Taipei City 114, Taiwan, R.O.C Tel: +886-2-66000123 E-mail: tsd@dlink.com.tw
Imports
| From | Symbols |
|---|---|
| DLINK-ID-REC-MIB | dlinkIndustrialCommon |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
DLINK-ID-REC-MIB DLINKSW-CABLE-DIAG-MIB IANAifType-MIB IF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| DlinkCableDiagStatus TEXTUAL-CONVENTION The status of a pair of the cable. other(0) - Other status is not specified here. E.g. the diagnostics has never been performed, or the previous result is cleared. ok(1) - The pair or cable has no error. open(2) - The cable in the error pair does not have a connection at the specified position. short(3) - The cable in the error pair has a short problem at the specified position. openOrShort(4) - The PHY has no capability to distinguish between open and short state. crosstalk(5)- The cable in the error pair has a crosstalk problem at the specified position. unKnown(6) - The diagnostics got an unknown status. noCable(7) - The port does not have any cable connection to the remote partner. shutdown(8)- The remote partner is powered off. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| dCableDiagNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.171.14.58.0 | |||
| dCableDiagObjects OBJECT-IDENTITY | 1.3.6.1.4.1.171.14.58.1 | |||
| dCableDiagIfTable OBJECT-TYPE A table contains a list of information about test on the device's interfaces. Note that entries will exist in this table when the corresponding interface is capable to run test. | 1.3.6.1.4.1.171.14.58.1.1 | not-accessible | current | |
| dCableDiagIfEntry OBJECT-TYPE An entry in the dCableDiagIfTable, contains the testing controls on an interface. | 1.3.6.1.4.1.171.14.58.1.1.1 | not-accessible | current | |
| dCableDiagIfAction OBJECT-TYPE This object control the action to be executed on the interface. noOp(1) - No action is taken if this object is set to 'noOp'. When read, the value 'noOp' is returned. test(2) - Start the test on the interface. clear(3) - Clear all the test results on the interface. The value of the following objects of the entry will become 'other'. -- dCableDiagResultPair1Status -- dCableDiagResultPair2Status -- dCableDiagResultPair3Status -- dCableDiagResultPair4Status The value of the following objects of the entry will become -1 (unavailable) -- dCableDiagResultPair1Length -- dCableDiagResultPair2Length -- dCableDiagResultPair3Length -- dCableDiagResultPair4Length The value of dCableDiagResultStatus of the entry will become 'notRun'. | 1.3.6.1.4.1.171.14.58.1.1.1.1 | INTEGER {noOp(1), test(2), clear(3)} | read-write | current |
| dCableDiagResultTable OBJECT-TYPE A table contains a list of interface's cable situation. Note that entries will exist in this table when the corresponding interface is a copper Ethernet port. | 1.3.6.1.4.1.171.14.58.1.2 | not-accessible | current | |
| dCableDiagResultEntry OBJECT-TYPE An entry in dCableDiagResultTable contains cable situation of an interface. | 1.3.6.1.4.1.171.14.58.1.2.1 | not-accessible | current | |
| dCableDiagResultPair1Status OBJECT-TYPE This object indicates the status of pair 1 of the cable. | 1.3.6.1.4.1.171.14.58.1.2.1.1 | DlinkCableDiagStatus | read-only | current |
| dCableDiagResultPair2Status OBJECT-TYPE This object indicates the status of pair 2 of the cable. | 1.3.6.1.4.1.171.14.58.1.2.1.2 | DlinkCableDiagStatus | read-only | current |
| dCableDiagResultPair3Status OBJECT-TYPE This object indicates the status of pair 3 of the cable. | 1.3.6.1.4.1.171.14.58.1.2.1.3 | DlinkCableDiagStatus | read-only | current |
| dCableDiagResultPair4Status OBJECT-TYPE This object indicates the status of pair 4 of the cable. | 1.3.6.1.4.1.171.14.58.1.2.1.4 | DlinkCableDiagStatus | read-only | current |
| dCableDiagResultPair1Length OBJECT-TYPE This object indicates the approximate length or length to the failure of pair 1 of the cable. This value is in meter units. The special value of -1 indicates the length is unavailable. | 1.3.6.1.4.1.171.14.58.1.2.1.5 | Integer32 | read-only | current |
| dCableDiagResultPair2Length OBJECT-TYPE This object indicates the approximate length or length to the failure of pair 2 of the cable. This value is in meter units. The special value of -1 indicates the length is unavailable. | 1.3.6.1.4.1.171.14.58.1.2.1.6 | Integer32 | read-only | current |
| dCableDiagResultPair3Length OBJECT-TYPE This object indicates the approximate length or length to the failure of pair 3 of the cable. This value is in meter units. The special value of -1 indicates the length is unavailable. | 1.3.6.1.4.1.171.14.58.1.2.1.7 | Integer32 | read-only | current |
| dCableDiagResultPair4Length OBJECT-TYPE This object indicates the approximate length or length to the failure of pair 4 of the cable. This value is in meter units. The special value of -1 indicates the length is unavailable. | 1.3.6.1.4.1.171.14.58.1.2.1.8 | Integer32 | read-only | current |
| dCableDiagResultStatus OBJECT-TYPE Indicates the status of cable diagnostics on the interface. notRun(0) - the cable diagnostics has never been run for this interface or the previous result is cleared. processing(1) - the cable diagnostics is currently running on the interface. lastTestOk(2) - the last cable diagnostics was performed successfully on the interface. lastTestFailed(3) - the last cable diagnostics failed on the interface. | 1.3.6.1.4.1.171.14.58.1.2.1.9 | INTEGER {notRun(0), processing(1), lastTestOk(2), lastTestFailed(3)} | read-only | current |
| dCableDiagConformance OBJECT-IDENTITY | 1.3.6.1.4.1.171.14.58.2 | |||
| dCableDiagCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.171.14.58.2.1 | |||
| dCableDiagGroups OBJECT-IDENTITY | 1.3.6.1.4.1.171.14.58.2.1.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| dCableDiagCompliance MODULE-COMPLIANCE The compliance statement for entities which implement the DLINKSW-CABLE-DIAG-MIB. | 1.3.6.1.4.1.171.14.58.2.1.1 | current |
| dCableDiagBasicGroup OBJECT-GROUP This group contains the collection of objects related to configuration and information of fundamental cable diagnostics feature. | 1.3.6.1.4.1.171.14.58.2.1.2.1 | current |