DLINK-AGENT-MIB
- Registered at
- 1.3.6.1.4.1.171.12.1.4.1
- Last updated
- 1900-07-15 00:00
- Organization
- D-Link, Inc.
- Namespace
- dlink
- Source file
DLINK-AGENT-MIB- Digest
sha256:9baeb937ee98aadddfbc2f5367c204c542d7e2ec127e0ab4e92f0161048be738
Description
The Structure of Common Management Information for the D-Link enterprise.
Contact
D-Link Customer Service Postal: No. 20,Park Ave, II, Science-based Industrial Park, Hsinchu, taiwan, R.O.C. Tel: 886-3-577-9966 E-mail:
Imports
| From | Symbols |
|---|---|
| DLINK-ID-REC-MIB | AgentNotifyLevel, dlink-common-mgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
DLINK-AGENT-MIB DLINK-ID-REC-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| agentBasicInfo OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.1.1 | |||
| agentMgmtProtocolCapability OBJECT-TYPE The network management protocol(s) supported by this agent. | 1.3.6.1.4.1.171.12.1.1.1 | INTEGER {other(1), snmp-ip(2), snmp-ipx(3), snmp-ip-ipx(4)} | read-only | current |
| agentMibCapabilityTable OBJECT-TYPE A list of MIB capability entries supported by this agent. | 1.3.6.1.4.1.171.12.1.1.2 | not-accessible | current | |
| agentMibCapabilityEntry OBJECT-TYPE A MIB capability entry contains objects describing a particular MIB supported by this agent. | 1.3.6.1.4.1.171.12.1.1.2.1 | not-accessible | current | |
| agentMibCapabilityIndex OBJECT-TYPE A list of agentMibCapabilityDescr entries. | 1.3.6.1.4.1.171.12.1.1.2.1.1 | Integer32 | read-only | current |
| agentMibCapabilityDescr OBJECT-TYPE The name of the MIB supported by the agent. | 1.3.6.1.4.1.171.12.1.1.2.1.2 | DisplayString (SIZE(0..35)) | read-only | current |
| agentMibCapabilityVersion OBJECT-TYPE The version of the MIB specified in this entry. | 1.3.6.1.4.1.171.12.1.1.2.1.3 | Integer32 | read-only | current |
| agentMibCapabilityType OBJECT-TYPE The type of the MIB specified in this entry. | 1.3.6.1.4.1.171.12.1.1.2.1.4 | INTEGER {other(1), standard(2), proprietary(3), experiment(4)} | read-only | current |
| agentStatusConsoleInUse OBJECT-TYPE This indicates whether console is currently in-use. | 1.3.6.1.4.1.171.12.1.1.3 | INTEGER {other(1), in-use(2), not-in-use(3)} | read-only | current |
| agentStatusSaveCfg OBJECT-TYPE This indicates the status of the device configuration. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. proceeding(2) - the device configuration is being currently saved into the NV-RAM. completed(3) ¡V all of the device configuration parameters have been saved into NV-RAM. failed(4) - The process to save device configuration has failed. | 1.3.6.1.4.1.171.12.1.1.4 | INTEGER {other(1), proceeding(2), completed(3), failed(4)} | read-only | current |
| agentStatusFileTransfer OBJECT-TYPE status of firmware download control. If the value is 'other', means never firmware updated since device started up. | 1.3.6.1.4.1.171.12.1.1.5 | INTEGER {other(1), in-process(2), invalid-file(3), violation(4), file-not-found(5), disk-full(6), complete(7), time-out(8), not-format(9), memory-full(10)} | read-only | current |
| agentCPUutilization OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.1.1.6 | |||
| agentCPUutilizationIn5sec OBJECT-TYPE Time scale is 5 seconds.The value will be between 0%(idle) and 100% (very busy). | 1.3.6.1.4.1.171.12.1.1.6.1 | Integer32 | read-only | current |
| agentCPUutilizationIn1min OBJECT-TYPE Time scale is 1 minute.The value will be between 0%(idle) and 100% (very busy). | 1.3.6.1.4.1.171.12.1.1.6.2 | Integer32 | read-only | current |
| agentCPUutilizationIn5min OBJECT-TYPE Time scale is 5 minute.The value will be between 0%(idle) and 100% (very busy). | 1.3.6.1.4.1.171.12.1.1.6.3 | Integer32 | read-only | current |
| agentPORTutilizationTable OBJECT-TYPE The table specifies port's utilization function. | 1.3.6.1.4.1.171.12.1.1.7 | not-accessible | current | |
| agentPORTutilizationEntry OBJECT-TYPE A list of information about port's utilization function. | 1.3.6.1.4.1.171.12.1.1.7.1 | not-accessible | current | |
| agentPORTutilizationProtIndex OBJECT-TYPE This object indicates the module's port number. | 1.3.6.1.4.1.171.12.1.1.7.1.1 | INTEGER (1..65535) | read-only | current |
| agentPORTutilizationTX OBJECT-TYPE The real time gauges of transmitted frames on the specific port. | 1.3.6.1.4.1.171.12.1.1.7.1.2 | INTEGER | read-only | current |
| agentPORTutilizationRX OBJECT-TYPE The real time gauges of recieved frames on the specific port. | 1.3.6.1.4.1.171.12.1.1.7.1.3 | INTEGER | read-only | current |
| agentPORTutilizationUtil OBJECT-TYPE The real time percentage of the port statistics. | 1.3.6.1.4.1.171.12.1.1.7.1.4 | INTEGER (0..100) | read-only | current |
| agentDRAMutilizationTable OBJECT-TYPE Information about DRAM memory. | 1.3.6.1.4.1.171.12.1.1.9 | not-accessible | current | |
| agentDRAMutilizationEntry OBJECT-TYPE A list of information about DRAM memory. | 1.3.6.1.4.1.171.12.1.1.9.1 | not-accessible | current | |
| agentDRAMutilizationUnitID OBJECT-TYPE Specifies the unit ID. If the ID equals to zero, it means the current device. | 1.3.6.1.4.1.171.12.1.1.9.1.1 | INTEGER | read-only | current |
| agentDRAMutilizationTotalDRAM OBJECT-TYPE The size of Total DRAM Memory. | 1.3.6.1.4.1.171.12.1.1.9.1.2 | INTEGER | read-only | current |
| agentDRAMutilizationUsedDRAM OBJECT-TYPE The size of used DRAM memory. | 1.3.6.1.4.1.171.12.1.1.9.1.3 | INTEGER | read-only | current |
| agentDRAMutilization OBJECT-TYPE The percentage of used DRAM memory of the total DRAM memory available. The value will be between 0%(idle) and 100%(very busy). | 1.3.6.1.4.1.171.12.1.1.9.1.4 | INTEGER | read-only | current |
| agentStatusReset OBJECT-TYPE This indicates the status of 'agentReset'. | 1.3.6.1.4.1.171.12.1.1.11 | INTEGER {proceeding(1), completed(2), failed(3)} | read-only | current |
| agentBasicConfig OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.1.2 | |||
| agentBscSwFileTable OBJECT-TYPE A list of MIB Basic Config entries supported file Update by this agent. | 1.3.6.1.4.1.171.12.1.2.1 | not-accessible | current | |
| agentBscSwFileEntry OBJECT-TYPE A basic configuration entry contains objects describing a particular MIB supported by this agent. | 1.3.6.1.4.1.171.12.1.2.1.1 | not-accessible | current | |
| agentBscSwFileIndex OBJECT-TYPE The table index for the file entry | 1.3.6.1.4.1.171.12.1.2.1.1.1 | Integer32 | read-only | current |
| agentBscSwFileDscr OBJECT-TYPE The description for the purpose of the software file in this entry. Note: For systems which do not support change of this object, setting values to this object will cause the system to return bad-value error message. | 1.3.6.1.4.1.171.12.1.2.1.1.2 | DisplayString (SIZE(0..64)) | read-write | current |
| agentBscSwFileAddr OBJECT-TYPE The IP address where the file to be downloaded is located, or the IP address where the file will be uploaded to. | 1.3.6.1.4.1.171.12.1.2.1.1.3 | IpAddress | read-write | current |
| agentBscSwFileTransferType OBJECT-TYPE The channel through which the file will be downloaded or uploaded. Note: For systems which do not support all channels, setting values to the unsupported channel will cause the system to return bad-value error message. | 1.3.6.1.4.1.171.12.1.2.1.1.4 | INTEGER {other(1), network-load(2), out-of-band-load(3)} | read-write | current |
| agentBscSwFile OBJECT-TYPE The name of the file to be downloaded from the TFTP server, or to be uploaded to. | 1.3.6.1.4.1.171.12.1.2.1.1.5 | DisplayString (SIZE(0..64)) | read-write | current |
| agentBscSwFileLocateId OBJECT-TYPE This object describes the type of the file. runtime-code(1), log-file(2), cfg-file(3) Note: For system which does not support change of this object, setting value to this object will cause the system to return bad-value error message. | 1.3.6.1.4.1.171.12.1.2.1.1.6 | INTEGER (1..16) | read-write | current |
| agentBscSwFileLoadType OBJECT-TYPE This object allows the user to select download or upload function for the file. Note: For system which does not support change of this object, setting value to this object will cause the system to return bad-value error message. | 1.3.6.1.4.1.171.12.1.2.1.1.7 | INTEGER {other(1), upload(2), download(3)} | read-write | current |
| agentBscSwFileCtrl OBJECT-TYPE This object allows the user to download runtime software. The setting will take effect when the system restarts. See Note(1) below Note: For systems which do not support change of this object to some value, setting these values cause the system to return bad-value error messages. start - start to action. delete(4) - delete the firmware by indicated firmware ID. config-as-bootup-fw(5) - configured as bootup firmware by indicated firmware(ID). | 1.3.6.1.4.1.171.12.1.2.1.1.8 | INTEGER {other(1), inactive(2), start(3), delete(4), config-as-bootup-fw(5)} | read-write | current |
| agentBscSwFileBIncrement OBJECT-TYPE The object indicates that whether the previous configuration will be valid or not after downloading the configuration file. True : keep valid False : erase. | 1.3.6.1.4.1.171.12.1.2.1.1.9 | TruthValue | read-write | current |
| agentMultiImageCtrlID OBJECT-TYPE The section ID of firmware image. | 1.3.6.1.4.1.171.12.1.2.1.1.10 | INTEGER | read-write | current |
| agentFileTransfer OBJECT-TYPE This object will execute the download or upload action. If start(2), it will begin to download/upload, but no reset follows. If start-and-reset(3), then the reset will activate after download or upload. No action if(4). Note: Because these functions will be limited by the system support, some of the selected items will be invalid. When the user selects one of the items, it will respond with bad-value status. | 1.3.6.1.4.1.171.12.1.2.2 | INTEGER {other(1), start(2), start-and-reset(3), noaction(4)} | read-write | obsolete |
| agentSystemReset OBJECT-TYPE This object indicates the agent system reset state. Setting this object to no-reset(4) has no effect. Setting this object to cold-start(2) or warm-start(3) will reset the agent. The agent always returns no-reset(4) when this object is read. | 1.3.6.1.4.1.171.12.1.2.3 | INTEGER {other(1), cold-start(2), warm-start(3), no-reset(4)} | read-write | deprecated |
| agentRs232PortConfig OBJECT-TYPE This object indicates the RS-232C mode when device has restarted. | 1.3.6.1.4.1.171.12.1.2.4 | INTEGER {other(1), console(2), out-of-band(3), notAvail(4)} | read-write | current |
| agentOutOfBandBaudRateConfig OBJECT-TYPE This object allows user to specify out-of-band baud rate. It will take effect when the system is restarted Note: Because these funictions will be limited by the system support, some of the selected items will be invalid. Whenthe user selects one of the items, it will respond with a bad-value status. | 1.3.6.1.4.1.171.12.1.2.5 | INTEGER {other(1), baudRate-2400(2), baudRate-9600(3), baudRate-19200(4), baudRate-38400(5), baudRate-115200(6)} | read-write | obsolete |
| agentSaveCfg OBJECT-TYPE As the object is set to 'set(3)', the current device configuration will be saved into to NV-RAM. | 1.3.6.1.4.1.171.12.1.2.6 | INTEGER {other(1), idle(2), set(3)} | read-write | current |
| swMultiImageInfoTable OBJECT-TYPE | 1.3.6.1.4.1.171.12.1.2.7 | not-accessible | current | |
| swMultiImageInfoEntry OBJECT-TYPE A list of information about multiple image management. | 1.3.6.1.4.1.171.12.1.2.7.1 | not-accessible | current | |
| swMultiImageInfoID OBJECT-TYPE The section ID of firmware image. | 1.3.6.1.4.1.171.12.1.2.7.1.1 | INTEGER | read-only | current |
| swMultiImageVersion OBJECT-TYPE The record of downloaded firmware version. | 1.3.6.1.4.1.171.12.1.2.7.1.2 | DisplayString (SIZE(0..32)) | read-only | current |
| swMultiImageSize OBJECT-TYPE The record of downloaded firmware size. | 1.3.6.1.4.1.171.12.1.2.7.1.3 | Integer32 | read-only | current |
| swMultiImageUpdateTime OBJECT-TYPE The record of firmware updated time. | 1.3.6.1.4.1.171.12.1.2.7.1.4 | DisplayString (SIZE(0..32)) | read-only | current |
| swMultiImageFrom OBJECT-TYPE The record of IP address of TFTP server. | 1.3.6.1.4.1.171.12.1.2.7.1.5 | DisplayString (SIZE(0..32)) | read-only | current |
| swMultiImageSendUser OBJECT-TYPE The record of user who downloaded the firmware. | 1.3.6.1.4.1.171.12.1.2.7.1.6 | DisplayString (SIZE(0..32)) | read-only | current |
| agentTrustHostMgmt OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.1.2.10 | |||
| agentTrustHostTable OBJECT-TYPE This table contains Trust Host information. | 1.3.6.1.4.1.171.12.1.2.10.1 | not-accessible | current | |
| agentTrustHostEntry OBJECT-TYPE A list of information about Trust Host. | 1.3.6.1.4.1.171.12.1.2.10.1.1 | not-accessible | current | |
| agentTrustHostIndex OBJECT-TYPE The index of Trust Host entry. | 1.3.6.1.4.1.171.12.1.2.10.1.1.1 | INTEGER (1..10) | read-only | current |
| agentTrustHostIPAddress OBJECT-TYPE Specifies the IP address of the Trust Host. | 1.3.6.1.4.1.171.12.1.2.10.1.1.2 | IpAddress | read-create | current |
| agentTrustHostRowStatus OBJECT-TYPE Indicates the status of this entry. When creating a Trust Host entry, the IP address should be set, too. | 1.3.6.1.4.1.171.12.1.2.10.1.1.3 | RowStatus | read-create | current |
| agentTrustHostIPSubnetMask OBJECT-TYPE Specifies the IP subnet mask of the Trust Host. | 1.3.6.1.4.1.171.12.1.2.10.1.1.4 | IpAddress | read-create | current |
| agentTrustHostDelAllState OBJECT-TYPE Used to delete all Trust Host entries. | 1.3.6.1.4.1.171.12.1.2.10.2 | INTEGER {none(1), start(2)} | read-write | current |
| agentFDBMgmt OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.1.2.11 | |||
| agentFDBClearAllState OBJECT-TYPE Used to clear all FDB entries. | 1.3.6.1.4.1.171.12.1.2.11.1 | INTEGER {other(1), start(2)} | read-write | current |
| agentARPMgmt OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.1.2.12 | |||
| agentARPClearAllState OBJECT-TYPE Used to clear all ARP entries. | 1.3.6.1.4.1.171.12.1.2.12.1 | INTEGER {other(1), start(2)} | read-write | current |
| agentReboot OBJECT-TYPE Used to restart the switch. | 1.3.6.1.4.1.171.12.1.2.19 | INTEGER {none(1), start(2)} | read-write | current |
| agentReset OBJECT-TYPE Used to reset all switch parameters. none(1) : No action. This is the default vaule of this object. config(2): All parameters are reset to default settings. But device will not do save neither reboot. system(3): All parameters are reset to default settings. Then the switch will do factory reset, save and reboot. reset(4) : All parameters will be reset to default settings except IP address, user account and history log. But device will not do save neither reboot. | 1.3.6.1.4.1.171.12.1.2.20 | INTEGER {none(1), config(2), system(3), reset(4)} | read-write | current |
| agentIpProtoConfig OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.1.3 | |||
| agentIpNumOfIf OBJECT-TYPE The total number of IP interfaces supported by this agent. | 1.3.6.1.4.1.171.12.1.3.1 | Integer32 | read-only | current |
| agentIpTftpServerAddr OBJECT-TYPE The IP Address of TFTP Server. | 1.3.6.1.4.1.171.12.1.3.2 | IpAddress | read-write | obsolete |
| agentIpGetIpFrom OBJECT-TYPE This object indicates whether the agent get its system IP address from Bootp/DHCP server at start up. | 1.3.6.1.4.1.171.12.1.3.3 | INTEGER {other(1), disabled(2), bootp(3), dhcp(4)} | read-write | current |
| agentIpAutoconfig OBJECT-TYPE | 1.3.6.1.4.1.171.12.1.3.4 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| agentNotify OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.1.4 | |||
| agentNotifMgmt OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.1.4.1 | |||
| systemTrapsSeverity OBJECT-TYPE Indicates the level of system severity control. The system has a severity level control and each trap should be associated with a severity control. When a trap event occurs and its severity is higher than the system severity control level, the trap works as defined. If the event severity is lower than the system severity control level, the event is ignored as if it did not occur. | 1.3.6.1.4.1.171.12.1.4.1.1 | AgentNotifyLevel | read-write | current |
| systemLogsSeverity OBJECT-TYPE Indicates the level of system severity control. The system has a severity level control and each log should be associated with a severity control. When log event occurs and its severity is higher than the system severity control level, the log works as defined. If the event severity is lower than the system severity control level, the event is ignored as if it did not occur. | 1.3.6.1.4.1.171.12.1.4.1.2 | AgentNotifyLevel | read-write | current |