DKT-GE-MIB
- Registered at
- 1.3.6.1.4.1.27304.14
- Last updated
- 2009-01-14 00:00
- Organization
- DKT A/S
- Namespace
- dkt
- Source file
DKT-GE-MIB- Digest
sha256:71daf91d07a54914170523a09f56d2ebc5904c7c9973f0bdc54542242d47d5b5
Description
DKT Gigabit MIB.
Contact
postal: DKT A/S Fanoevej 6 DK-4060 Kirke Saaby Denmark email: info@dktcomega.com
Imports
| From | Symbols |
|---|---|
| DKT-MIB | dkt |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
DKT-GE-MIB DKT-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| geSwitchEngine OBJECT-IDENTITY | 1.3.6.1.4.1.27304.14.1 | |||
| geATU OBJECT-TYPE Dumps the Address Translation Unit (ATU) Switch table in semi colon format | 1.3.6.1.4.1.27304.14.1.1 | OCTET STRING (SIZE(0..20480)) | read-only | current |
| geUnicastDelete OBJECT-TYPE Removes a unicast MAC address from the Address Translation Unit (ATU) Switch table. | 1.3.6.1.4.1.27304.14.1.2 | OCTET STRING (SIZE(0..100)) | write-only | current |
| geMulticastDelete OBJECT-TYPE Removes a multicast IP address from the Address Translation Unit (ATU) Switch table. | 1.3.6.1.4.1.27304.14.1.3 | IpAddress | write-only | current |
| geIGMPSnooping OBJECT-TYPE Starts/stops IGMP snooping, input parameter 0 = stops IGMP snooping, 1 = starts IGMP snooping. Per Default IGMP snooping is enabled, but has to be configured per port | 1.3.6.1.4.1.27304.14.1.4 | INTEGER (0..1) | read-write | current |
| geVTU OBJECT-TYPE Dumps the VLAN Table Unit (VTU) Switch table in semi colon format | 1.3.6.1.4.1.27304.14.1.5 | OCTET STRING (SIZE(0..9600)) | read-only | current |
| geVLANCreate OBJECT-TYPE Creates a VLAN, input parameters are: VID:WAN:LAN1:LAN2:LAN3:LAN4:CPU:NRL-ENABLE | 1.3.6.1.4.1.27304.14.1.6 | OCTET STRING (SIZE(0..100)) | write-only | current |
| geVLANDelete OBJECT-TYPE Deletes a VLAN, input parameter is VLAN VID: 0 - 4095 | 1.3.6.1.4.1.27304.14.1.7 | INTEGER (0..4095) | write-only | current |
| geClearVTU OBJECT-TYPE Clears the VLAN Table Unit (VTU) Switch table, input parameter 1 = clear VTU table | 1.3.6.1.4.1.27304.14.1.8 | INTEGER (1) | write-only | current |
| geDumpPIRLBuckets OBJECT-TYPE Dumps a list of the active buckets. | 1.3.6.1.4.1.27304.14.1.9 | OCTET STRING (SIZE(0..10)) | read-only | current |
| geVLANProviderMode OBJECT-TYPE Enable/disable VLAN provider mode, input parameter 0 = disable VLAN provider mode, 1 = enable VLAN provider mode. Per Default VLAN provider mode is disabled. NOTE: Provider VLAN ID should be setup in port default VID for the originating port. | 1.3.6.1.4.1.27304.14.1.10 | INTEGER (0..1) | read-write | current |
| gePorts OBJECT-IDENTITY | 1.3.6.1.4.1.27304.14.2 | |||
| geCPUPort OBJECT-IDENTITY | 1.3.6.1.4.1.27304.14.2.1 | |||
| geCPUPortAutoNegotiation OBJECT-TYPE Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.1.1 | INTEGER (0..10) | read-write | current |
| geCPUPortSpeedMode OBJECT-TYPE Sets/gets the speed and duplex mode on the port. Input parameters are: AUTO | 1.3.6.1.4.1.27304.14.2.1.2 | OCTET STRING (SIZE(0..10)) | read-write | current |
| geCPUPortLinkStatus OBJECT-TYPE Gets the Link status for the port | 1.3.6.1.4.1.27304.14.2.1.3 | INTEGER (0..1) | read-only | current |
| geCPUPortFlowControl OBJECT-TYPE Enables/disables flow control on the port. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.1.4 | INTEGER (0..1) | read-write | current |
| geCPUPortIEEEQoSPriority OBJECT-TYPE Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.1.5 | INTEGER (0..1) | read-write | current |
| geCPUPortIPQoSPriority OBJECT-TYPE Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.1.6 | INTEGER (0..1) | read-write | current |
| geCPUPortQoSPortMapRule OBJECT-TYPE Forces queue priority for a port. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.1.7 | INTEGER (0..1) | read-write | current |
| geCPUPortVIDNRLEnable OBJECT-TYPE Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.1.8 | INTEGER (0..1) | read-write | current |
| geCPUPortDisablePIRL2Bucket OBJECT-TYPE Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4. | 1.3.6.1.4.1.27304.14.2.1.9 | INTEGER (0..4) | write-only | current |
| geCPUPortEgressRateLimitation OBJECT-TYPE Sets the egress limitation rate for the port. Input parameter is value in kbps | 1.3.6.1.4.1.27304.14.2.1.10 | Integer32 | read-write | current |
| geCPUPortIngressRateLimitation OBJECT-TYPE Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC) | 1.3.6.1.4.1.27304.14.2.1.11 | OCTET STRING (SIZE(0..100)) | read-write | current |
| geCPUPortDefaultVLAN OBJECT-TYPE Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095 | 1.3.6.1.4.1.27304.14.2.1.12 | INTEGER | read-write | current |
| geCPUPortForceDefaultVID OBJECT-TYPE Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.1.13 | INTEGER (0..1) | read-write | current |
| geCPUPortVLANPortMode OBJECT-TYPE Sets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=secure | 1.3.6.1.4.1.27304.14.2.1.14 | INTEGER (0..3) | read-write | current |
| geCPUPortBlockAllUnknown OBJECT-TYPE This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID. | 1.3.6.1.4.1.27304.14.2.1.15 | INTEGER (0..1) | read-write | current |
| geCPUPortIGMPSnooping OBJECT-TYPE Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.1.16 | INTEGER (0..1) | read-write | current |
| geCPUPortAddUnicast OBJECT-TYPE Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff | 1.3.6.1.4.1.27304.14.2.1.17 | OCTET STRING (SIZE(0..100)) | write-only | current |
| geCPUPortAddMulticast OBJECT-TYPE Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd | 1.3.6.1.4.1.27304.14.2.1.18 | IpAddress | write-only | current |
| geCPUPortMtu OBJECT-TYPE The MTU size of the port. | 1.3.6.1.4.1.27304.14.2.1.19 | INTEGER (0..2) | read-write | current |
| geWANPort OBJECT-IDENTITY | 1.3.6.1.4.1.27304.14.2.2 | |||
| geWANPortAutoNegotiation OBJECT-TYPE Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.2.1 | INTEGER (0..10) | read-write | current |
| geWANPortSpeedMode OBJECT-TYPE Sets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD) | 1.3.6.1.4.1.27304.14.2.2.2 | OCTET STRING (SIZE(0..10)) | read-write | current |
| geWANPortLinkStatus OBJECT-TYPE Gets the Link status for the port | 1.3.6.1.4.1.27304.14.2.2.3 | INTEGER (0..1) | read-only | current |
| geWANPortFlowControl OBJECT-TYPE Enables/disables flow control on the port. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.2.4 | INTEGER (0..1) | read-write | current |
| geWANPortIEEEQoSPriority OBJECT-TYPE Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.2.5 | INTEGER (0..1) | read-write | current |
| geWANPortIPQoSPriority OBJECT-TYPE Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.2.6 | INTEGER (0..1) | read-write | current |
| geWANPortQoSPortMapRule OBJECT-TYPE Forces queue priority for a port. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.2.7 | INTEGER (0..1) | read-write | current |
| geWANPortVIDNRLEnable OBJECT-TYPE Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.2.8 | INTEGER (0..1) | read-write | current |
| geWANPortDisablePIRL2Bucket OBJECT-TYPE Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4. | 1.3.6.1.4.1.27304.14.2.2.9 | INTEGER (0..4) | write-only | current |
| geWANPortEgressRateLimitation OBJECT-TYPE Sets the egress limitation rate for the port. Input parameter is value in kbps | 1.3.6.1.4.1.27304.14.2.2.10 | Integer32 | read-write | current |
| geWANPortIngressRateLimitation OBJECT-TYPE Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC) | 1.3.6.1.4.1.27304.14.2.2.11 | OCTET STRING (SIZE(0..100)) | write-only | current |
| geWANPortDefaultVLAN OBJECT-TYPE Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095 | 1.3.6.1.4.1.27304.14.2.2.12 | INTEGER | read-write | current |
| geWANPortForceDefaultVID OBJECT-TYPE Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.2.13 | INTEGER (0..1) | read-write | current |
| geWANPortVLANPortMode OBJECT-TYPE Sets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=secure | 1.3.6.1.4.1.27304.14.2.2.14 | INTEGER (0..3) | read-write | current |
| geWANPortBlockAllUnknown OBJECT-TYPE This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID. | 1.3.6.1.4.1.27304.14.2.2.15 | INTEGER (0..1) | read-write | current |
| geWANPortIGMPSnooping OBJECT-TYPE Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.2.16 | INTEGER (0..1) | read-write | current |
| geWANPortAddUnicast OBJECT-TYPE Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff | 1.3.6.1.4.1.27304.14.2.2.17 | OCTET STRING (SIZE(0..100)) | write-only | current |
| geWANPortAddMulticast OBJECT-TYPE Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd | 1.3.6.1.4.1.27304.14.2.2.18 | IpAddress | write-only | current |
| geWANPortMtu OBJECT-TYPE The MTU size of the port. | 1.3.6.1.4.1.27304.14.2.2.19 | INTEGER (0..2) | read-write | current |
| geWANPortArpMirroring OBJECT-TYPE Mirror ARP packets seen on the port to the CPU port. | 1.3.6.1.4.1.27304.14.2.2.20 | INTEGER (0..1) | read-write | current |
| geLAN1Port OBJECT-IDENTITY | 1.3.6.1.4.1.27304.14.2.3 | |||
| geLAN1PortAutoNegotiation OBJECT-TYPE Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.3.1 | INTEGER (0..10) | read-write | current |
| geLAN1PortSpeedMode OBJECT-TYPE Sets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD) | 1.3.6.1.4.1.27304.14.2.3.2 | OCTET STRING (SIZE(0..10)) | read-write | current |
| geLAN1PortLinkStatus OBJECT-TYPE Gets the Link status for the port | 1.3.6.1.4.1.27304.14.2.3.3 | INTEGER (0..1) | read-only | current |
| geLAN1PortFlowControl OBJECT-TYPE Enables/disables flow control on the port. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.3.4 | INTEGER (0..1) | read-write | current |
| geLAN1PortIEEEQoSPriority OBJECT-TYPE Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.3.5 | INTEGER (0..1) | read-write | current |
| geLAN1PortIPQoSPriority OBJECT-TYPE Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.3.6 | INTEGER (0..1) | read-write | current |
| geLAN1PortQoSPortMapRule OBJECT-TYPE Forces queue priority for a port. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.3.7 | INTEGER (0..1) | read-write | current |
| geLAN1PortVIDNRLEnable OBJECT-TYPE Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.3.8 | INTEGER (0..1) | read-write | current |
| geLAN1PortDisablePIRL2Bucket OBJECT-TYPE Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4. | 1.3.6.1.4.1.27304.14.2.3.9 | INTEGER (0..4) | write-only | current |
| geLAN1PortEgressRateLimitation OBJECT-TYPE Sets the egress limitation rate for the port. Input parameter is value in kbps | 1.3.6.1.4.1.27304.14.2.3.10 | Integer32 | read-write | current |
| geLAN1PortIngressRateLimitation OBJECT-TYPE Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC) | 1.3.6.1.4.1.27304.14.2.3.11 | OCTET STRING (SIZE(0..100)) | write-only | current |
| geLAN1PortDefaultVLAN OBJECT-TYPE Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095 | 1.3.6.1.4.1.27304.14.2.3.12 | INTEGER | read-write | current |
| geLAN1PortForceDefaultVID OBJECT-TYPE Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.3.13 | INTEGER (0..1) | read-write | current |
| geLAN1PortVLANPortMode OBJECT-TYPE Sets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=secure | 1.3.6.1.4.1.27304.14.2.3.14 | INTEGER (0..3) | read-write | current |
| geLAN1PortBlockAllUnknown OBJECT-TYPE This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID. | 1.3.6.1.4.1.27304.14.2.3.15 | INTEGER (0..1) | read-write | current |
| geLAN1PortIGMPSnooping OBJECT-TYPE Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.3.16 | INTEGER (0..1) | read-write | current |
| geLAN1PortAddUnicast OBJECT-TYPE Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff | 1.3.6.1.4.1.27304.14.2.3.17 | OCTET STRING (SIZE(0..100)) | write-only | current |
| geLAN1PortAddMulticast OBJECT-TYPE Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd | 1.3.6.1.4.1.27304.14.2.3.18 | IpAddress | write-only | current |
| geLAN1PortMtu OBJECT-TYPE The MTU size of the port. | 1.3.6.1.4.1.27304.14.2.3.19 | INTEGER (0..2) | read-write | current |
| geLAN1PortArpMirroring OBJECT-TYPE Mirror ARP packets seen on the port to the CPU port. | 1.3.6.1.4.1.27304.14.2.3.20 | INTEGER (0..1) | read-write | current |
| geLAN2Port OBJECT-IDENTITY | 1.3.6.1.4.1.27304.14.2.4 | |||
| geLAN2PortAutoNegotiation OBJECT-TYPE Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.4.1 | INTEGER (0..10) | read-write | current |
| geLAN2PortSpeedMode OBJECT-TYPE Sets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD) | 1.3.6.1.4.1.27304.14.2.4.2 | OCTET STRING (SIZE(0..10)) | read-write | current |
| geLAN2PortLinkStatus OBJECT-TYPE Gets the Link status for the port | 1.3.6.1.4.1.27304.14.2.4.3 | INTEGER (0..1) | read-only | current |
| geLAN2PortFlowControl OBJECT-TYPE Enables/disables flow control on the port. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.4.4 | INTEGER (0..1) | read-write | current |
| geLAN2PortIEEEQoSPriority OBJECT-TYPE Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.4.5 | INTEGER (0..1) | read-write | current |
| geLAN2PortIPQoSPriority OBJECT-TYPE Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.4.6 | INTEGER (0..1) | read-write | current |
| geLAN2PortQoSPortMapRule OBJECT-TYPE Forces queue priority for a port. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.4.7 | INTEGER (0..1) | read-write | current |
| geLAN2PortVIDNRLEnable OBJECT-TYPE Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.4.8 | INTEGER (0..1) | read-write | current |
| geLAN2PortDisablePIRL2Bucket OBJECT-TYPE Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4. | 1.3.6.1.4.1.27304.14.2.4.9 | INTEGER (0..4) | write-only | current |
| geLAN2PortEgressRateLimitation OBJECT-TYPE Sets the egress limitation rate for the port. Input parameter is value in kbps | 1.3.6.1.4.1.27304.14.2.4.10 | Integer32 | read-write | current |
| geLAN2PortIngressRateLimitation OBJECT-TYPE Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC) | 1.3.6.1.4.1.27304.14.2.4.11 | OCTET STRING (SIZE(0..100)) | write-only | current |
| geLAN2PortDefaultVLAN OBJECT-TYPE Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095 | 1.3.6.1.4.1.27304.14.2.4.12 | INTEGER | read-write | current |
| geLAN2PortForceDefaultVID OBJECT-TYPE Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.4.13 | INTEGER (0..1) | read-write | current |
| geLAN2PortVLANPortMode OBJECT-TYPE Sets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=secure | 1.3.6.1.4.1.27304.14.2.4.14 | INTEGER (0..3) | read-write | current |
| geLAN2PortBlockAllUnknown OBJECT-TYPE This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID. | 1.3.6.1.4.1.27304.14.2.4.15 | INTEGER (0..1) | read-write | current |
| geLAN2PortIGMPSnooping OBJECT-TYPE Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.4.16 | INTEGER (0..1) | read-write | current |
| geLAN2PortAddUnicast OBJECT-TYPE Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff | 1.3.6.1.4.1.27304.14.2.4.17 | OCTET STRING (SIZE(0..100)) | write-only | current |
| geLAN2PortAddMulticast OBJECT-TYPE Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd | 1.3.6.1.4.1.27304.14.2.4.18 | IpAddress | write-only | current |
| geLAN2PortMtu OBJECT-TYPE The MTU size of the port. | 1.3.6.1.4.1.27304.14.2.4.19 | INTEGER (0..2) | read-write | current |
| geLAN2PortArpMirroring OBJECT-TYPE Mirror ARP packets seen on the port to the CPU port. | 1.3.6.1.4.1.27304.14.2.4.20 | INTEGER (0..1) | read-write | current |
| geLAN3Port OBJECT-IDENTITY | 1.3.6.1.4.1.27304.14.2.5 | |||
| geLAN3PortAutoNegotiation OBJECT-TYPE Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.5.1 | INTEGER (0..10) | read-write | current |
| geLAN3PortSpeedMode OBJECT-TYPE Sets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD) | 1.3.6.1.4.1.27304.14.2.5.2 | OCTET STRING (SIZE(0..10)) | read-write | current |
| geLAN3PortLinkStatus OBJECT-TYPE Gets the Link status for the port | 1.3.6.1.4.1.27304.14.2.5.3 | INTEGER (0..1) | read-only | current |
| geLAN3PortFlowControl OBJECT-TYPE Enables/disables flow control on the port. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.5.4 | INTEGER (0..1) | read-write | current |
| geLAN3PortIEEEQoSPriority OBJECT-TYPE Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.5.5 | INTEGER (0..1) | read-write | current |
| geLAN3PortIPQoSPriority OBJECT-TYPE Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.5.6 | INTEGER (0..1) | read-write | current |
| geLAN3PortQoSPortMapRule OBJECT-TYPE Forces queue priority for a port. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.5.7 | INTEGER (0..1) | read-write | current |
| geLAN3PortVIDNRLEnable OBJECT-TYPE Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.5.8 | INTEGER (0..1) | read-write | current |
| geLAN3PortDisablePIRL2Bucket OBJECT-TYPE Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4. | 1.3.6.1.4.1.27304.14.2.5.9 | INTEGER (0..4) | write-only | current |
| geLAN3PortEgressRateLimitation OBJECT-TYPE Sets the egress limitation rate for the port. Input parameter is value in kbps | 1.3.6.1.4.1.27304.14.2.5.10 | Integer32 | read-write | current |
| geLAN3PortIngressRateLimitation OBJECT-TYPE Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC) | 1.3.6.1.4.1.27304.14.2.5.11 | OCTET STRING (SIZE(0..100)) | write-only | current |
| geLAN3PortDefaultVLAN OBJECT-TYPE Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095 | 1.3.6.1.4.1.27304.14.2.5.12 | INTEGER | read-write | current |
| geLAN3PortForceDefaultVID OBJECT-TYPE Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.5.13 | INTEGER (0..1) | read-write | current |
| geLAN3PortVLANPortMode OBJECT-TYPE Sets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=secure | 1.3.6.1.4.1.27304.14.2.5.14 | INTEGER (0..3) | read-write | current |
| geLAN3PortBlockAllUnknown OBJECT-TYPE This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID. | 1.3.6.1.4.1.27304.14.2.5.15 | INTEGER (0..1) | read-write | current |
| geLAN3PortIGMPSnooping OBJECT-TYPE Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.5.16 | INTEGER (0..1) | read-write | current |
| geLAN3PortAddUnicast OBJECT-TYPE Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff | 1.3.6.1.4.1.27304.14.2.5.17 | OCTET STRING (SIZE(0..100)) | write-only | current |
| geLAN3PortAddMulticast OBJECT-TYPE Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd | 1.3.6.1.4.1.27304.14.2.5.18 | IpAddress | write-only | current |
| geLAN3PortMtu OBJECT-TYPE The MTU size of the port. | 1.3.6.1.4.1.27304.14.2.5.19 | INTEGER (0..2) | read-write | current |
| geLAN3PortArpMirroring OBJECT-TYPE Mirror ARP packets seen on the port to the CPU port. | 1.3.6.1.4.1.27304.14.2.5.20 | INTEGER (0..1) | read-write | current |
| geLAN4Port OBJECT-IDENTITY | 1.3.6.1.4.1.27304.14.2.6 | |||
| geLAN4PortAutoNegotiation OBJECT-TYPE Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.6.1 | INTEGER (0..10) | read-write | current |
| geLAN4PortSpeedMode OBJECT-TYPE Sets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD) | 1.3.6.1.4.1.27304.14.2.6.2 | OCTET STRING (SIZE(0..10)) | read-write | current |
| geLAN4PortLinkStatus OBJECT-TYPE Gets the Link status for the port | 1.3.6.1.4.1.27304.14.2.6.3 | INTEGER (0..1) | read-only | current |
| geLAN4PortFlowControl OBJECT-TYPE Enables/disables flow control on the port. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.6.4 | INTEGER (0..1) | read-write | current |
| geLAN4PortIEEEQoSPriority OBJECT-TYPE Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.6.5 | INTEGER (0..1) | read-write | current |
| geLAN4PortIPQoSPriority OBJECT-TYPE Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.6.6 | INTEGER (0..1) | read-write | current |
| geLAN4PortQoSPortMapRule OBJECT-TYPE Forces queue priority for a port. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.6.7 | INTEGER (0..1) | read-write | current |
| geLAN4PortVIDNRLEnable OBJECT-TYPE Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.6.8 | INTEGER (0..1) | read-write | current |
| geLAN4PortDisablePIRL2Bucket OBJECT-TYPE Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4. | 1.3.6.1.4.1.27304.14.2.6.9 | INTEGER (0..4) | write-only | current |
| geLAN4PortEgressRateLimitation OBJECT-TYPE Sets the egress limitation rate for the port. Input parameter is value in kbps | 1.3.6.1.4.1.27304.14.2.6.10 | Integer32 | read-write | current |
| geLAN4PortIngressRateLimitation OBJECT-TYPE Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC) | 1.3.6.1.4.1.27304.14.2.6.11 | OCTET STRING (SIZE(0..100)) | write-only | current |
| geLAN4PortDefaultVLAN OBJECT-TYPE Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095 | 1.3.6.1.4.1.27304.14.2.6.12 | INTEGER | read-write | current |
| geLAN4PortForceDefaultVID OBJECT-TYPE Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.6.13 | INTEGER (0..1) | read-write | current |
| geLAN4PortVLANPortMode OBJECT-TYPE Sets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=secure | 1.3.6.1.4.1.27304.14.2.6.14 | INTEGER (0..3) | read-write | current |
| geLAN4PortBlockAllUnknown OBJECT-TYPE This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID. | 1.3.6.1.4.1.27304.14.2.6.15 | INTEGER (0..1) | read-write | current |
| geLAN4PortIGMPSnooping OBJECT-TYPE Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable. | 1.3.6.1.4.1.27304.14.2.6.16 | INTEGER (0..1) | read-write | current |
| geLAN4PortAddUnicast OBJECT-TYPE Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff | 1.3.6.1.4.1.27304.14.2.6.17 | OCTET STRING (SIZE(0..100)) | write-only | current |
| geLAN4PortAddMulticast OBJECT-TYPE Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd | 1.3.6.1.4.1.27304.14.2.6.18 | IpAddress | write-only | current |
| geLAN4PortMtu OBJECT-TYPE The MTU size of the port. | 1.3.6.1.4.1.27304.14.2.6.19 | INTEGER (0..2) | read-write | current |
| geLAN4PortArpMirroring OBJECT-TYPE Mirror ARP packets seen on the port to the CPU port. | 1.3.6.1.4.1.27304.14.2.6.20 | INTEGER (0..1) | read-write | current |
Conformance
| Name | OID | Status |
|---|---|---|
| geModuleGroup OBJECT-GROUP The objects are related to the DKTCOMEGA Gigabit module, MIB rev 02_00. | 1.3.6.1.4.1.27304.14.4 | current |