MIBs Depot

DKT-FE-MIB

Registered at
1.3.6.1.4.1.27304.12
Last updated
2008-12-17 00:00
Organization
DKT A/S
Namespace
dkt
Source file
DKT-FE-MIB
Digest
sha256:cb488843304308890992fd35c54398cd5eeb53adf8a32732b6d54bbfe8ba0630

Description

DKT Fast Ethernet MIB.

Contact

postal: DKT A/S Fanoevej 6 DK-4060 Kirke Saaby Denmark email: info@dktcomega.com

Imports

FromSymbols
DKT-MIBdkt
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

DKT-FE-MIB
DKT-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
feSwitchEngine
OBJECT-IDENTITY
1.3.6.1.4.1.27304.12.1
feATU
OBJECT-TYPE
Dumps the Address Translation Unit (ATU) Switch table in semi colon format
1.3.6.1.4.1.27304.12.1.1OCTET STRING (SIZE(0..20480))read-onlycurrent
feUnicastDelete
OBJECT-TYPE
Removes a unicast MAC address from the Address Translation Unit (ATU) Switch table.
1.3.6.1.4.1.27304.12.1.2OCTET STRING (SIZE(0..100))write-onlycurrent
feMulticastDelete
OBJECT-TYPE
Removes a multicast IP address from the Address Translation Unit (ATU) Switch table.
1.3.6.1.4.1.27304.12.1.3IpAddresswrite-onlycurrent
feIGMPSnooping
OBJECT-TYPE
Starts/stops IGMP snooping, input parameter 0 = stops IGMP snooping, 1 = starts IGMP snooping. Per Default IGMP snooping is enabled, but has to be configured per port
1.3.6.1.4.1.27304.12.1.4INTEGER (0..1)read-writecurrent
feVTU
OBJECT-TYPE
Dumps the VLAN Table Unit (VTU) Switch table in semi colon format
1.3.6.1.4.1.27304.12.1.5OCTET STRING (SIZE(0..9600))read-onlycurrent
feVLANCreate
OBJECT-TYPE
Creates a VLAN, input parameters are: VID:WAN:LAN1:LAN2:LAN3:LAN4:CPU:NRL-ENABLE
1.3.6.1.4.1.27304.12.1.6OCTET STRING (SIZE(0..100))write-onlycurrent
feVLANDelete
OBJECT-TYPE
Deletes a VLAN, input parameter is VLAN VID: 0 - 4095
1.3.6.1.4.1.27304.12.1.7INTEGER (0..4095)write-onlycurrent
feClearVTU
OBJECT-TYPE
Clears the VLAN Table Unit (VTU) Switch table, input parameter 1 = clear VTU table
1.3.6.1.4.1.27304.12.1.8INTEGER (1)write-onlycurrent
feDumpPIRLBuckets
OBJECT-TYPE
Dumps a list of the active buckets.
1.3.6.1.4.1.27304.12.1.9OCTET STRING (SIZE(0..10))read-onlycurrent
feDisablePIRLBucket
OBJECT-TYPE
Disables an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 11.
1.3.6.1.4.1.27304.12.1.10INTEGER (0..11)write-onlycurrent
feVLANProviderMode
OBJECT-TYPE
Enable/disable VLAN provider mode, input parameter 0 = disable VLAN provider mode, 1 = enable VLAN provider mode. Per Default VLAN provider mode is disabled. NOTE: Provider VLAN ID should be setup in port default VID for the originating port.
1.3.6.1.4.1.27304.12.1.11INTEGER (0..1)read-writecurrent
fePorts
OBJECT-IDENTITY
1.3.6.1.4.1.27304.12.2
feCPUPort
OBJECT-IDENTITY
1.3.6.1.4.1.27304.12.2.1
feCPUPortAutoNegotiation
OBJECT-TYPE
Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.1.1INTEGER (0..10)read-writecurrent
feCPUPortSpeedMode
OBJECT-TYPE
Sets/gets the speed and duplex mode on the port. Input parameters are: 100FD|100HD|10FD|10HD|AUTO|FD|HD
1.3.6.1.4.1.27304.12.2.1.2OCTET STRING (SIZE(0..10))read-writecurrent
feCPUPortLinkStatus
OBJECT-TYPE
Gets the Link status for the port
1.3.6.1.4.1.27304.12.2.1.3INTEGER (0..1)read-onlycurrent
feCPUPortFlowControl
OBJECT-TYPE
Enables/disables flow control on the port. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.1.4INTEGER (0..1)read-writecurrent
feCPUPortIEEEQoSPriority
OBJECT-TYPE
Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.1.5INTEGER (0..1)read-writecurrent
feCPUPortIPQoSPriority
OBJECT-TYPE
Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.1.6INTEGER (0..1)read-writecurrent
feCPUPortFramePriorityOverwrite
OBJECT-TYPE
Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1.
1.3.6.1.4.1.27304.12.2.1.7OCTET STRING (SIZE(0..100))read-writecurrent
feCPUPortQueuePriorityOverwrite
OBJECT-TYPE
Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1.
1.3.6.1.4.1.27304.12.2.1.8OCTET STRING (SIZE(0..100))read-writecurrent
feCPUPortQueuePriority
OBJECT-TYPE
Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1
1.3.6.1.4.1.27304.12.2.1.9OCTET STRING (SIZE(0..100))read-writecurrent
feCPUPortQoSPortMapRule
OBJECT-TYPE
Forces queue priority for a port. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.1.10INTEGER (0..1)read-writecurrent
feCPUPortVIDNRLEnable
OBJECT-TYPE
Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.1.11INTEGER (0..1)read-writecurrent
feCPUPortMap2PIRL
OBJECT-TYPE
Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.
1.3.6.1.4.1.27304.12.2.1.12INTEGER (0..11)write-onlycurrent
feCPUPortDeletePortMap2PIRL
OBJECT-TYPE
Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.
1.3.6.1.4.1.27304.12.2.1.13INTEGER (0..11)write-onlycurrent
feCPUPortEgressRateLimitation
OBJECT-TYPE
Sets the egress limitation rate for the port. Input parameter is value in kbps
1.3.6.1.4.1.27304.12.2.1.14Integer32read-writecurrent
feCPUPortIngressRateLimitation
OBJECT-TYPE
Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)
1.3.6.1.4.1.27304.12.2.1.15OCTET STRING (SIZE(0..100))read-writecurrent
feCPUPortDefaultVLAN
OBJECT-TYPE
Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095
1.3.6.1.4.1.27304.12.2.1.16INTEGERread-writecurrent
feCPUPortForceDefaultVID
OBJECT-TYPE
Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.1.17INTEGER (0..1)read-writecurrent
feCPUPortVLANPortMode
OBJECT-TYPE
Sets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=secure
1.3.6.1.4.1.27304.12.2.1.18INTEGER (0..3)read-writecurrent
feCPUPortBlockAllUnknown
OBJECT-TYPE
This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID.
1.3.6.1.4.1.27304.12.2.1.19INTEGER (0..1)read-writecurrent
feCPUPortIGMPSnooping
OBJECT-TYPE
Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.1.20INTEGER (0..1)read-writecurrent
feCPUPortAddUnicast
OBJECT-TYPE
Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff
1.3.6.1.4.1.27304.12.2.1.21OCTET STRING (SIZE(0..100))write-onlycurrent
feCPUPortAddMulticast
OBJECT-TYPE
Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd
1.3.6.1.4.1.27304.12.2.1.22IpAddresswrite-onlycurrent
feWANPort
OBJECT-IDENTITY
1.3.6.1.4.1.27304.12.2.2
feWANPortAutoNegotiation
OBJECT-TYPE
Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.2.1INTEGER (0..10)read-writecurrent
feWANPortSpeedMode
OBJECT-TYPE
Sets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD)
1.3.6.1.4.1.27304.12.2.2.2OCTET STRING (SIZE(0..10))read-writecurrent
feWANPortLinkStatus
OBJECT-TYPE
Gets the Link status for the port
1.3.6.1.4.1.27304.12.2.2.3INTEGER (0..1)read-onlycurrent
feWANPortFlowControl
OBJECT-TYPE
Enables/disables flow control on the port. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.2.4INTEGER (0..1)read-writecurrent
feWANPortIEEEQoSPriority
OBJECT-TYPE
Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.2.5INTEGER (0..1)read-writecurrent
feWANPortIPQoSPriority
OBJECT-TYPE
Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.2.6INTEGER (0..1)read-writecurrent
feWANPortFramePriorityOverwrite
OBJECT-TYPE
Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1.
1.3.6.1.4.1.27304.12.2.2.7OCTET STRING (SIZE(0..100))read-writecurrent
feWANPortQueuePriorityOverwrite
OBJECT-TYPE
Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1.
1.3.6.1.4.1.27304.12.2.2.8OCTET STRING (SIZE(0..100))read-writecurrent
feWANPortQueuePriority
OBJECT-TYPE
Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1
1.3.6.1.4.1.27304.12.2.2.9OCTET STRING (SIZE(0..100))read-writecurrent
feWANPortQoSPortMapRule
OBJECT-TYPE
Forces queue priority for a port. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.2.10INTEGER (0..1)read-writecurrent
feWANPortVIDNRLEnable
OBJECT-TYPE
Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.2.11INTEGER (0..1)read-writecurrent
feWANPortMap2PIRL
OBJECT-TYPE
Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.
1.3.6.1.4.1.27304.12.2.2.12INTEGER (0..11)write-onlycurrent
feWANPortDeletePortMap2PIRL
OBJECT-TYPE
Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.
1.3.6.1.4.1.27304.12.2.2.13INTEGER (0..11)write-onlycurrent
feWANPortEgressRateLimitation
OBJECT-TYPE
Sets the egress limitation rate for the port. Input parameter is value in kbps
1.3.6.1.4.1.27304.12.2.2.14Integer32read-writecurrent
feWANPortIngressRateLimitation
OBJECT-TYPE
Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)
1.3.6.1.4.1.27304.12.2.2.15OCTET STRING (SIZE(0..100))write-onlycurrent
feWANPortDefaultVLAN
OBJECT-TYPE
Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095
1.3.6.1.4.1.27304.12.2.2.16INTEGERread-writecurrent
feWANPortForceDefaultVID
OBJECT-TYPE
Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.2.17INTEGER (0..1)read-writecurrent
feWANPortVLANPortMode
OBJECT-TYPE
Sets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=secure
1.3.6.1.4.1.27304.12.2.2.18INTEGER (0..3)read-writecurrent
feWANPortBlockAllUnknown
OBJECT-TYPE
This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID.
1.3.6.1.4.1.27304.12.2.2.19INTEGER (0..1)read-writecurrent
feWANPortIGMPSnooping
OBJECT-TYPE
Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.2.20INTEGER (0..1)read-writecurrent
feWANPortAddUnicast
OBJECT-TYPE
Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff
1.3.6.1.4.1.27304.12.2.2.21OCTET STRING (SIZE(0..100))write-onlycurrent
feWANPortAddMulticast
OBJECT-TYPE
Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd
1.3.6.1.4.1.27304.12.2.2.22IpAddresswrite-onlycurrent
feWANPortArpMirroring
OBJECT-TYPE
Mirror ARP packets seen on the port to the CPU port.
1.3.6.1.4.1.27304.12.2.2.23INTEGER (0..1)read-writecurrent
feLAN1Port
OBJECT-IDENTITY
1.3.6.1.4.1.27304.12.2.3
feLAN1PortAutoNegotiation
OBJECT-TYPE
Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.3.1INTEGER (0..10)read-writecurrent
feLAN1PortSpeedMode
OBJECT-TYPE
Sets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD)
1.3.6.1.4.1.27304.12.2.3.2OCTET STRING (SIZE(0..10))read-writecurrent
feLAN1PortLinkStatus
OBJECT-TYPE
Gets the Link status for the port
1.3.6.1.4.1.27304.12.2.3.3INTEGER (0..1)read-onlycurrent
feLAN1PortFlowControl
OBJECT-TYPE
Enables/disables flow control on the port. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.3.4INTEGER (0..1)read-writecurrent
feLAN1PortIEEEQoSPriority
OBJECT-TYPE
Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.3.5INTEGER (0..1)read-writecurrent
feLAN1PortIPQoSPriority
OBJECT-TYPE
Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.3.6INTEGER (0..1)read-writecurrent
feLAN1PortFramePriorityOverwrite
OBJECT-TYPE
Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1.
1.3.6.1.4.1.27304.12.2.3.7OCTET STRING (SIZE(0..100))read-writecurrent
feLAN1PortQueuePriorityOverwrite
OBJECT-TYPE
Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1.
1.3.6.1.4.1.27304.12.2.3.8OCTET STRING (SIZE(0..100))read-writecurrent
feLAN1PortQueuePriority
OBJECT-TYPE
Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1
1.3.6.1.4.1.27304.12.2.3.9OCTET STRING (SIZE(0..100))read-writecurrent
feLAN1PortQoSPortMapRule
OBJECT-TYPE
Forces queue priority for a port. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.3.10INTEGER (0..1)read-writecurrent
feLAN1PortVIDNRLEnable
OBJECT-TYPE
Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.3.11INTEGER (0..1)read-writecurrent
feLAN1PortMap2PIRL
OBJECT-TYPE
Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.
1.3.6.1.4.1.27304.12.2.3.12INTEGER (0..11)write-onlycurrent
feLAN1PortDeletePortMap2PIRL
OBJECT-TYPE
Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.
1.3.6.1.4.1.27304.12.2.3.13INTEGER (0..11)write-onlycurrent
feLAN1PortEgressRateLimitation
OBJECT-TYPE
Sets the egress limitation rate for the port. Input parameter is value in kbps
1.3.6.1.4.1.27304.12.2.3.14Integer32read-writecurrent
feLAN1PortIngressRateLimitation
OBJECT-TYPE
Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)
1.3.6.1.4.1.27304.12.2.3.15OCTET STRING (SIZE(0..100))write-onlycurrent
feLAN1PortDefaultVLAN
OBJECT-TYPE
Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095
1.3.6.1.4.1.27304.12.2.3.16INTEGERread-writecurrent
feLAN1PortForceDefaultVID
OBJECT-TYPE
Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.3.17INTEGER (0..1)read-writecurrent
feLAN1PortVLANPortMode
OBJECT-TYPE
Sets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=secure
1.3.6.1.4.1.27304.12.2.3.18INTEGER (0..3)read-writecurrent
feLAN1PortBlockAllUnknown
OBJECT-TYPE
This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID.
1.3.6.1.4.1.27304.12.2.3.19INTEGER (0..1)read-writecurrent
feLAN1PortIGMPSnooping
OBJECT-TYPE
Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.3.20INTEGER (0..1)read-writecurrent
feLAN1PortAddUnicast
OBJECT-TYPE
Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff
1.3.6.1.4.1.27304.12.2.3.21OCTET STRING (SIZE(0..100))write-onlycurrent
feLAN1PortAddMulticast
OBJECT-TYPE
Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd
1.3.6.1.4.1.27304.12.2.3.22IpAddresswrite-onlycurrent
feLAN1PortArpMirroring
OBJECT-TYPE
Mirror ARP packets seen on the port to the CPU port.
1.3.6.1.4.1.27304.12.2.3.23INTEGER (0..1)read-writecurrent
feLAN2Port
OBJECT-IDENTITY
1.3.6.1.4.1.27304.12.2.4
feLAN2PortAutoNegotiation
OBJECT-TYPE
Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.4.1INTEGER (0..10)read-writecurrent
feLAN2PortSpeedMode
OBJECT-TYPE
Sets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD)
1.3.6.1.4.1.27304.12.2.4.2OCTET STRING (SIZE(0..10))read-writecurrent
feLAN2PortLinkStatus
OBJECT-TYPE
Gets the Link status for the port
1.3.6.1.4.1.27304.12.2.4.3INTEGER (0..1)read-onlycurrent
feLAN2PortFlowControl
OBJECT-TYPE
Enables/disables flow control on the port. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.4.4INTEGER (0..1)read-writecurrent
feLAN2PortIEEEQoSPriority
OBJECT-TYPE
Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.4.5INTEGER (0..1)read-writecurrent
feLAN2PortIPQoSPriority
OBJECT-TYPE
Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.4.6INTEGER (0..1)read-writecurrent
feLAN2PortFramePriorityOverwrite
OBJECT-TYPE
Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1.
1.3.6.1.4.1.27304.12.2.4.7OCTET STRING (SIZE(0..100))read-writecurrent
feLAN2PortQueuePriorityOverwrite
OBJECT-TYPE
Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1.
1.3.6.1.4.1.27304.12.2.4.8OCTET STRING (SIZE(0..100))read-writecurrent
feLAN2PortQueuePriority
OBJECT-TYPE
Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1
1.3.6.1.4.1.27304.12.2.4.9OCTET STRING (SIZE(0..100))read-writecurrent
feLAN2PortQoSPortMapRule
OBJECT-TYPE
Forces queue priority for a port. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.4.10INTEGER (0..1)read-writecurrent
feLAN2PortVIDNRLEnable
OBJECT-TYPE
Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.4.11INTEGER (0..1)read-writecurrent
feLAN2PortMap2PIRL
OBJECT-TYPE
Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.
1.3.6.1.4.1.27304.12.2.4.12INTEGER (0..11)write-onlycurrent
feLAN2PortDeletePortMap2PIRL
OBJECT-TYPE
Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.
1.3.6.1.4.1.27304.12.2.4.13INTEGER (0..11)write-onlycurrent
feLAN2PortEgressRateLimitation
OBJECT-TYPE
Sets the egress limitation rate for the port. Input parameter is value in kbps
1.3.6.1.4.1.27304.12.2.4.14Integer32read-writecurrent
feLAN2PortIngressRateLimitation
OBJECT-TYPE
Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)
1.3.6.1.4.1.27304.12.2.4.15OCTET STRING (SIZE(0..100))write-onlycurrent
feLAN2PortDefaultVLAN
OBJECT-TYPE
Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095
1.3.6.1.4.1.27304.12.2.4.16INTEGERread-writecurrent
feLAN2PortForceDefaultVID
OBJECT-TYPE
Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.4.17INTEGER (0..1)read-writecurrent
feLAN2PortVLANPortMode
OBJECT-TYPE
Sets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=secure
1.3.6.1.4.1.27304.12.2.4.18INTEGER (0..3)read-writecurrent
feLAN2PortBlockAllUnknown
OBJECT-TYPE
This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID.
1.3.6.1.4.1.27304.12.2.4.19INTEGER (0..1)read-writecurrent
feLAN2PortIGMPSnooping
OBJECT-TYPE
Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.4.20INTEGER (0..1)read-writecurrent
feLAN2PortAddUnicast
OBJECT-TYPE
Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff
1.3.6.1.4.1.27304.12.2.4.21OCTET STRING (SIZE(0..100))write-onlycurrent
feLAN2PortAddMulticast
OBJECT-TYPE
Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd
1.3.6.1.4.1.27304.12.2.4.22IpAddresswrite-onlycurrent
feLAN2PortArpMirroring
OBJECT-TYPE
Mirror ARP packets seen on the port to the CPU port.
1.3.6.1.4.1.27304.12.2.4.23INTEGER (0..1)read-writecurrent
feLAN3Port
OBJECT-IDENTITY
1.3.6.1.4.1.27304.12.2.5
feLAN3PortAutoNegotiation
OBJECT-TYPE
Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.5.1INTEGER (0..10)read-writecurrent
feLAN3PortSpeedMode
OBJECT-TYPE
Sets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD)
1.3.6.1.4.1.27304.12.2.5.2OCTET STRING (SIZE(0..10))read-writecurrent
feLAN3PortLinkStatus
OBJECT-TYPE
Gets the Link status for the port
1.3.6.1.4.1.27304.12.2.5.3INTEGER (0..1)read-onlycurrent
feLAN3PortFlowControl
OBJECT-TYPE
Enables/disables flow control on the port. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.5.4INTEGER (0..1)read-writecurrent
feLAN3PortIEEEQoSPriority
OBJECT-TYPE
Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.5.5INTEGER (0..1)read-writecurrent
feLAN3PortIPQoSPriority
OBJECT-TYPE
Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.5.6INTEGER (0..1)read-writecurrent
feLAN3PortFramePriorityOverwrite
OBJECT-TYPE
Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1.
1.3.6.1.4.1.27304.12.2.5.7OCTET STRING (SIZE(0..100))read-writecurrent
feLAN3PortQueuePriorityOverwrite
OBJECT-TYPE
Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1.
1.3.6.1.4.1.27304.12.2.5.8OCTET STRING (SIZE(0..100))read-writecurrent
feLAN3PortQueuePriority
OBJECT-TYPE
Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1
1.3.6.1.4.1.27304.12.2.5.9OCTET STRING (SIZE(0..100))read-writecurrent
feLAN3PortQoSPortMapRule
OBJECT-TYPE
Forces queue priority for a port. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.5.10INTEGER (0..1)read-writecurrent
feLAN3PortVIDNRLEnable
OBJECT-TYPE
Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.5.11INTEGER (0..1)read-writecurrent
feLAN3PortMap2PIRL
OBJECT-TYPE
Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.
1.3.6.1.4.1.27304.12.2.5.12INTEGER (0..11)write-onlycurrent
feLAN3PortDeletePortMap2PIRL
OBJECT-TYPE
Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.
1.3.6.1.4.1.27304.12.2.5.13INTEGER (0..11)write-onlycurrent
feLAN3PortEgressRateLimitation
OBJECT-TYPE
Sets the egress limitation rate for the port. Input parameter is value in kbps
1.3.6.1.4.1.27304.12.2.5.14Integer32read-writecurrent
feLAN3PortIngressRateLimitation
OBJECT-TYPE
Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)
1.3.6.1.4.1.27304.12.2.5.15OCTET STRING (SIZE(0..100))write-onlycurrent
feLAN3PortDefaultVLAN
OBJECT-TYPE
Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095
1.3.6.1.4.1.27304.12.2.5.16INTEGERread-writecurrent
feLAN3PortForceDefaultVID
OBJECT-TYPE
Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.5.17INTEGER (0..1)read-writecurrent
feLAN3PortVLANPortMode
OBJECT-TYPE
Sets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=secure
1.3.6.1.4.1.27304.12.2.5.18INTEGER (0..3)read-writecurrent
feLAN3PortBlockAllUnknown
OBJECT-TYPE
This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID.
1.3.6.1.4.1.27304.12.2.5.19INTEGER (0..1)read-writecurrent
feLAN3PortIGMPSnooping
OBJECT-TYPE
Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.5.20INTEGER (0..1)read-writecurrent
feLAN3PortAddUnicast
OBJECT-TYPE
Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff
1.3.6.1.4.1.27304.12.2.5.21OCTET STRING (SIZE(0..100))write-onlycurrent
feLAN3PortAddMulticast
OBJECT-TYPE
Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd
1.3.6.1.4.1.27304.12.2.5.22IpAddresswrite-onlycurrent
feLAN3PortArpMirroring
OBJECT-TYPE
Mirror ARP packets seen on the port to the CPU port.
1.3.6.1.4.1.27304.12.2.5.23INTEGER (0..1)read-writecurrent
feLAN4Port
OBJECT-IDENTITY
1.3.6.1.4.1.27304.12.2.6
feLAN4PortAutoNegotiation
OBJECT-TYPE
Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.6.1INTEGER (0..10)read-writecurrent
feLAN4PortSpeedMode
OBJECT-TYPE
Sets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD)
1.3.6.1.4.1.27304.12.2.6.2OCTET STRING (SIZE(0..10))read-writecurrent
feLAN4PortLinkStatus
OBJECT-TYPE
Gets the Link status for the port
1.3.6.1.4.1.27304.12.2.6.3INTEGER (0..1)read-onlycurrent
feLAN4PortFlowControl
OBJECT-TYPE
Enables/disables flow control on the port. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.6.4INTEGER (0..1)read-writecurrent
feLAN4PortIEEEQoSPriority
OBJECT-TYPE
Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.6.5INTEGER (0..1)read-writecurrent
feLAN4PortIPQoSPriority
OBJECT-TYPE
Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.6.6INTEGER (0..1)read-writecurrent
feLAN4PortFramePriorityOverwrite
OBJECT-TYPE
Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1.
1.3.6.1.4.1.27304.12.2.6.7OCTET STRING (SIZE(0..100))read-writecurrent
feLAN4PortQueuePriorityOverwrite
OBJECT-TYPE
Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1.
1.3.6.1.4.1.27304.12.2.6.8OCTET STRING (SIZE(0..100))read-writecurrent
feLAN4PortQueuePriority
OBJECT-TYPE
Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1
1.3.6.1.4.1.27304.12.2.6.9OCTET STRING (SIZE(0..100))read-writecurrent
feLAN4PortQoSPortMapRule
OBJECT-TYPE
Forces queue priority for a port. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.6.10INTEGER (0..1)read-writecurrent
feLAN4PortVIDNRLEnable
OBJECT-TYPE
Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.6.11INTEGER (0..1)read-writecurrent
feLAN4PortMap2PIRL
OBJECT-TYPE
Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.
1.3.6.1.4.1.27304.12.2.6.12INTEGER (0..11)write-onlycurrent
feLAN4PortDeletePortMap2PIRL
OBJECT-TYPE
Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.
1.3.6.1.4.1.27304.12.2.6.13INTEGER (0..11)write-onlycurrent
feLAN4PortEgressRateLimitation
OBJECT-TYPE
Sets the egress limitation rate for the port. Input parameter is value in kbps
1.3.6.1.4.1.27304.12.2.6.14Integer32read-writecurrent
feLAN4PortIngressRateLimitation
OBJECT-TYPE
Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)
1.3.6.1.4.1.27304.12.2.6.15OCTET STRING (SIZE(0..100))write-onlycurrent
feLAN4PortDefaultVLAN
OBJECT-TYPE
Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095
1.3.6.1.4.1.27304.12.2.6.16INTEGERread-writecurrent
feLAN4PortForceDefaultVID
OBJECT-TYPE
Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.6.17INTEGER (0..1)read-writecurrent
feLAN4PortVLANPortMode
OBJECT-TYPE
Sets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=secure
1.3.6.1.4.1.27304.12.2.6.18INTEGER (0..3)read-writecurrent
feLAN4PortBlockAllUnknown
OBJECT-TYPE
This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID.
1.3.6.1.4.1.27304.12.2.6.19INTEGER (0..1)read-writecurrent
feLAN4PortIGMPSnooping
OBJECT-TYPE
Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable.
1.3.6.1.4.1.27304.12.2.6.20INTEGER (0..1)read-writecurrent
feLAN4PortAddUnicast
OBJECT-TYPE
Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff
1.3.6.1.4.1.27304.12.2.6.21OCTET STRING (SIZE(0..100))write-onlycurrent
feLAN4PortAddMulticast
OBJECT-TYPE
Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd
1.3.6.1.4.1.27304.12.2.6.22IpAddresswrite-onlycurrent
feLAN4PortArpMirroring
OBJECT-TYPE
Mirror ARP packets seen on the port to the CPU port.
1.3.6.1.4.1.27304.12.2.6.23INTEGER (0..1)read-writecurrent

Conformance

NameOIDStatus
feModuleGroup
OBJECT-GROUP
The objects are related to the DKTCOMEGA Fast Ethernet module, MIB rev 02_00.
1.3.6.1.4.1.27304.12.4current