MIBs Depot

DKSF-60-4-X-X-X

Registered at
1.3.6.1.4.1.25728.50
Last updated
2014-11-21 00:00
Organization
NetPing East, Alentis Electronics
Revisions
2014-11-21 00:00, 2014-10-23 00:00, 2012-10-09 00:00, 2012-03-01 00:00, 2011-04-11 00:00, 2011-02-05 00:00, 2011-01-28 00:00, 2010-04-14 00:00
Namespace
netping
Source file
DKSF-60-4-X-X-X
Digest
sha256:24ce3b735bfc74053b4460bf3500b98c0e072d3191dcea8c539b4b68513391ce

Description

Generic MIB for NetPing remote sensing and control

Contact

developers@netping.ru

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-MIBsnmpTraps
SNMPv2-SMICounter32, Counter64, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, enterprises, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TimeStamp, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

DKSF-60-4-X-X-X
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
lightcom
OBJECT-IDENTITY
1.3.6.1.4.1.25728
npReboot
OBJECT-IDENTITY
1.3.6.1.4.1.25728.911
npSoftReboot
OBJECT-TYPE
Write 1 to reboot device after current operations completition
1.3.6.1.4.1.25728.911.1INTEGERread-writecurrent
npResetStack
OBJECT-TYPE
Write 1 to re-initialize network stack
1.3.6.1.4.1.25728.911.2INTEGERread-writecurrent
npForcedReboot
OBJECT-TYPE
Write 1 to immediate forced reboot
1.3.6.1.4.1.25728.911.3INTEGERread-writecurrent
npRelay
OBJECT-IDENTITY
1.3.6.1.4.1.25728.5500
npRelayTable
OBJECT-TYPE
Watchdog and outlet/relay control table
1.3.6.1.4.1.25728.5500.5not-accessiblecurrent
npRelayEntry
OBJECT-TYPE
Relay/outlet table row
1.3.6.1.4.1.25728.5500.5.1not-accessiblecurrent
npRelayN
OBJECT-TYPE
The N of output relay
1.3.6.1.4.1.25728.5500.5.1.1INTEGER (1..2)read-onlycurrent
npRelayMode
OBJECT-TYPE
Control of relay: 0 - manual off 1 - manual on 2 - watchdog 3 - schedule 4 - both schedule and watchdog (while switched on by schedule) 5 - logic
1.3.6.1.4.1.25728.5500.5.1.2INTEGER {off(0), on(1), watchdog(2), schedule(3), scheduleAndWatchdog(4), logic(5)}read-writecurrent
npRelayStartReset
OBJECT-TYPE
Write 1 to start reset (switch relay off for some time)
1.3.6.1.4.1.25728.5500.5.1.3INTEGERread-writecurrent
npRelayMemo
OBJECT-TYPE
Relay memo
1.3.6.1.4.1.25728.5500.5.1.6DisplayStringread-onlycurrent
npRelayFlip
OBJECT-TYPE
Write -1 to flip between manual on and manual off states of relay
1.3.6.1.4.1.25728.5500.5.1.14INTEGER {flip(-1)}read-writecurrent
npRelayState
OBJECT-TYPE
Actual relay state at the moment, regardless of source of control. 0 - relay is off 1 - relay is on
1.3.6.1.4.1.25728.5500.5.1.15INTEGER {off(0), on(1)}read-onlycurrent
npPwr
OBJECT-IDENTITY
1.3.6.1.4.1.25728.5800
npPwrTable
OBJECT-TYPE
Watchdog and outlet/relay control table
1.3.6.1.4.1.25728.5800.3not-accessiblecurrent
npPwrEntry
OBJECT-TYPE
Watchdog and outlet/relay control table row
1.3.6.1.4.1.25728.5800.3.1not-accessiblecurrent
npPwrChannelN
OBJECT-TYPE
The id of watchdog/power channel
1.3.6.1.4.1.25728.5800.3.1.1INTEGER (1..2)read-onlycurrent
npPwrStartReset
OBJECT-TYPE
Write 1 to start forced reset On read: 0 - normal operation 1 - reset is active 2 - reboot pause is active or watchdog is inactive
1.3.6.1.4.1.25728.5800.3.1.2INTEGER (0..2)read-writecurrent
npPwrManualMode
OBJECT-TYPE
Mode of power channel 0 - manual off 1 - manual on 2 - watchdog 3 - schedule 4 - schedule and watchdog 5 - controlled by Logic
1.3.6.1.4.1.25728.5800.3.1.3INTEGER {off(0), on(1), watchdog(2), schedule(3), scheduleAndWatchdog(4), logic(5)}read-writecurrent
npPwrResetsCounter
OBJECT-TYPE
Counter of watchdog resets Write 0 to clear.
1.3.6.1.4.1.25728.5800.3.1.4INTEGER (0..65535)read-writecurrent
npPwrRepeatingResetsCounter
OBJECT-TYPE
Counter of continous failed watchdog resets
1.3.6.1.4.1.25728.5800.3.1.5INTEGER (0..65535)read-onlycurrent
npPwrMemo
OBJECT-TYPE
Relay channel memo
1.3.6.1.4.1.25728.5800.3.1.6DisplayStringread-onlycurrent
npPwrRelayFlip
OBJECT-TYPE
Write -1 to flip between manual on and manual off states of relay
1.3.6.1.4.1.25728.5800.3.1.14INTEGER {flip(-1)}read-writecurrent
npPwrRelayState
OBJECT-TYPE
Actual relay state at the moment, regardless of source of control. 0 - relay is off 1 - relay is on
1.3.6.1.4.1.25728.5800.3.1.15INTEGER {off(0), on(1)}read-onlycurrent
npIr
OBJECT-IDENTITY
1.3.6.1.4.1.25728.7900
npIrCtrl
OBJECT-IDENTITY
1.3.6.1.4.1.25728.7900.1
npIrPlayCmd
OBJECT-TYPE
Write IR command number to send IR command
1.3.6.1.4.1.25728.7900.1.1INTEGER (1..16)read-writecurrent
npIrReset
OBJECT-TYPE
Write 1 to reset IR transiever. After reset, send IR command and check npIrStatus.
1.3.6.1.4.1.25728.7900.1.2INTEGER (0..1)read-writecurrent
npIrStatus
OBJECT-TYPE
IR transiever status
1.3.6.1.4.1.25728.7900.1.3INTEGER {ok(0), busyCaptureWaitingButton(1), busyCaptureWaitingIr(2), busyPlayback(3), error(255)}read-onlycurrent
npCurLoop
OBJECT-IDENTITY
1.3.6.1.4.1.25728.8300
npCurLoopTable
OBJECT-TYPE
Current loop sensors Table
1.3.6.1.4.1.25728.8300.1not-accessiblecurrent
npCurLoopEntry
OBJECT-TYPE
Current loop sensors Table Row
1.3.6.1.4.1.25728.8300.1.1not-accessiblecurrent
npCurLoopN
OBJECT-TYPE
Index of current loop, 1 to max supported
1.3.6.1.4.1.25728.8300.1.1.1INTEGER (1..8)read-onlycurrent
npCurLoopStatus
OBJECT-TYPE
Status of the loop 0=Normal, 1=Alert, 2=Cut, 3=Short, 4=Not Powered
1.3.6.1.4.1.25728.8300.1.1.2INTEGER {ok(0), alert(1), cut(2), short(3), notPowered(4)}read-onlycurrent
npCurLoopI
OBJECT-TYPE
Loop current, mA
1.3.6.1.4.1.25728.8300.1.1.3INTEGER (0..99999)read-onlycurrent
npCurLoopV
OBJECT-TYPE
Voltage drop on the loop, mV
1.3.6.1.4.1.25728.8300.1.1.4INTEGER (0..99999)read-onlycurrent
npCurLoopR
OBJECT-TYPE
Resistance of the loop, Ohm
1.3.6.1.4.1.25728.8300.1.1.5INTEGER (0..99999)read-onlycurrent
npCurLoopPower
OBJECT-TYPE
Control of loop power 0=Off, 1=On, 2=reset by off/on power
1.3.6.1.4.1.25728.8300.1.1.7INTEGER {off(0), on(1), cyclePower(2)}read-writecurrent
npCurLoopTraps
OBJECT-IDENTITY
1.3.6.1.4.1.25728.8300.2
npCurLoopTrapPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.25728.8300.2.0
npCurLoopTrapN
OBJECT-TYPE
Index of current loop, which status has changed
1.3.6.1.4.1.25728.8300.2.1INTEGER (1..8)read-onlycurrent
npCurLoopTrapStatus
OBJECT-TYPE
Status of the loop 0=Normal, 1=Alert, 2=Cut, 3=Short, 4=Not Powered
1.3.6.1.4.1.25728.8300.2.2INTEGER {ok(0), alert(1), cut(2), short(3), notPowered(4)}read-onlycurrent
npCurLoopTrapI
OBJECT-TYPE
Loop current, mA
1.3.6.1.4.1.25728.8300.2.3INTEGER (0..99999)read-onlycurrent
npCurLoopTrapV
OBJECT-TYPE
Voltage drop on the loop, mV
1.3.6.1.4.1.25728.8300.2.4INTEGER (0..99999)read-onlycurrent
npCurLoopTrapR
OBJECT-TYPE
Resistance of the loop, Ohm
1.3.6.1.4.1.25728.8300.2.5INTEGER (0..99999)read-onlycurrent
npCurLoopTrapPower
OBJECT-TYPE
Status of loop power 0=Off, 1=On
1.3.6.1.4.1.25728.8300.2.7INTEGER {off(0), on(1)}read-writecurrent
npRelHumidity
OBJECT-IDENTITY
1.3.6.1.4.1.25728.8400
npRelHumSensor
OBJECT-IDENTITY
1.3.6.1.4.1.25728.8400.2
npRelHumSensorValueH
OBJECT-TYPE
Relative humidity value, %
1.3.6.1.4.1.25728.8400.2.2INTEGER (0..100)read-onlycurrent
npRelHumSensorStatus
OBJECT-TYPE
Status of the Rel.Humidity Sensor One 0=Normal, 1=Error or Sensor isn't connected
1.3.6.1.4.1.25728.8400.2.3INTEGER {error(0), ok(1)}read-onlycurrent
npRelHumSensorValueT
OBJECT-TYPE
Sensor temperature, deg.C
1.3.6.1.4.1.25728.8400.2.4INTEGER (-60..200)read-onlycurrent
npRelHumSensorStatusH
OBJECT-TYPE
Status of Relative Humiduty
1.3.6.1.4.1.25728.8400.2.5INTEGER {sensorFailed(0), belowSafeRange(1), inSafeRange(2), aboveSafeRange(3)}read-onlycurrent
npRelHumSafeRangeHigh
OBJECT-TYPE
Relative Humidity safe range, top margin, %RH
1.3.6.1.4.1.25728.8400.2.7INTEGER (0..100)read-onlycurrent
npRelHumSafeRangeLow
OBJECT-TYPE
Relative Humidity safe range, bottom margin, %RH
1.3.6.1.4.1.25728.8400.2.8INTEGER (0..100)read-onlycurrent
npRelHumSensorValueT100
OBJECT-TYPE
Sensor temperature, deg.C * 100 (fixed point two decimal places) Used to get access to the fractional part of T value
1.3.6.1.4.1.25728.8400.2.9Integer32read-onlycurrent
npThermo
OBJECT-IDENTITY
1.3.6.1.4.1.25728.8800
npThermoTable
OBJECT-TYPE
Thermo Sensors Table
1.3.6.1.4.1.25728.8800.1not-accessiblecurrent
npThermoEntry
OBJECT-TYPE
Thermo Sensors Table Row
1.3.6.1.4.1.25728.8800.1.1not-accessiblecurrent
npThermoSensorN
OBJECT-TYPE
The id of temperature sensor, 1 to 8
1.3.6.1.4.1.25728.8800.1.1.1INTEGER (1..8)read-onlycurrent
npThermoValue
OBJECT-TYPE
Temperature, deg.C
1.3.6.1.4.1.25728.8800.1.1.2INTEGER (-60..280)read-onlycurrent
npThermoStatus
OBJECT-TYPE
Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat)
1.3.6.1.4.1.25728.8800.1.1.3INTEGER {failed(0), low(1), norm(2), high(3)}read-onlycurrent
npThermoLow
OBJECT-TYPE
Bottom margin of normal temperature range, deg.C
1.3.6.1.4.1.25728.8800.1.1.4INTEGER (-60..280)read-onlycurrent
npThermoHigh
OBJECT-TYPE
Top margin of normal temperature range, deg.C
1.3.6.1.4.1.25728.8800.1.1.5INTEGER (-60..280)read-onlycurrent
npThermoMemo
OBJECT-TYPE
T channel memo
1.3.6.1.4.1.25728.8800.1.1.6DisplayStringread-onlycurrent
npThermoTraps
OBJECT-IDENTITY
1.3.6.1.4.1.25728.8800.2
npThermoTrapPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.25728.8800.2.0
npThermoTrapSensorN
OBJECT-TYPE
The id of temperature sensor, 1 to 8
1.3.6.1.4.1.25728.8800.2.1INTEGER (1..8)read-onlycurrent
npThermoTrapValue
OBJECT-TYPE
Temperature, deg.C
1.3.6.1.4.1.25728.8800.2.2INTEGER (-60..280)read-onlycurrent
npThermoTrapStatus
OBJECT-TYPE
Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat)
1.3.6.1.4.1.25728.8800.2.3INTEGER {failed(0), low(1), norm(2), high(3)}read-onlycurrent
npThermoTrapLow
OBJECT-TYPE
Bottom margin of normal temperature range, deg.C
1.3.6.1.4.1.25728.8800.2.4INTEGER (-60..280)read-onlycurrent
npThermoTrapHigh
OBJECT-TYPE
Top margin of normal temperature range, deg.C
1.3.6.1.4.1.25728.8800.2.5INTEGER (-60..280)read-onlycurrent
npThermoTrapMemo
OBJECT-TYPE
T channel memo
1.3.6.1.4.1.25728.8800.2.6DisplayStringread-onlycurrent
npIo
OBJECT-IDENTITY
1.3.6.1.4.1.25728.8900
npIoTable
OBJECT-TYPE
Digital Input/output Table
1.3.6.1.4.1.25728.8900.1not-accessiblecurrent
npIoEntry
OBJECT-TYPE
Digital Input/output Table Row
1.3.6.1.4.1.25728.8900.1.1not-accessiblecurrent
npIoLineN
OBJECT-TYPE
Number of IO line, from 1 to max supported
1.3.6.1.4.1.25728.8900.1.1.1INTEGER (1..16)read-onlycurrent
npIoLevelIn
OBJECT-TYPE
Input level, 0 or 1
1.3.6.1.4.1.25728.8900.1.1.2INTEGER (0..1)read-onlycurrent
npIoLevelOut
OBJECT-TYPE
Output level, 0 or 1. Write -1 to flip output.
1.3.6.1.4.1.25728.8900.1.1.3INTEGERread-writecurrent
npIoMemo
OBJECT-TYPE
IO line memo
1.3.6.1.4.1.25728.8900.1.1.6DisplayStringread-onlycurrent
npIoPulseCounter
OBJECT-TYPE
Pulse Counter on IO input line (counts positive fronts) Write 0 to reset.
1.3.6.1.4.1.25728.8900.1.1.9Counter32read-writecurrent
npIoSinglePulseDuration
OBJECT-TYPE
Set duration of single pulse on IO output line, 100ms to 25500ms, min. step is 100ms
1.3.6.1.4.1.25728.8900.1.1.12INTEGER (100..25500)read-writecurrent
npIoSinglePulseStart
OBJECT-TYPE
Write 1 to start single pulse on IO output. Output will be inverted for time, specified by npIoSinglePulseDuration
1.3.6.1.4.1.25728.8900.1.1.13INTEGERread-writecurrent
npIoTraps
OBJECT-IDENTITY
1.3.6.1.4.1.25728.8900.2
npIoTrapPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.25728.8900.2.0
npIoTrapLineN
OBJECT-TYPE
Trap data, Number of IO line
1.3.6.1.4.1.25728.8900.2.1INTEGER (1..16)read-onlycurrent
npIoTrapLevelIn
OBJECT-TYPE
Trap data, new Input level, 0 or 1
1.3.6.1.4.1.25728.8900.2.2INTEGER (0..1)read-onlycurrent
npIoTrapMemo
OBJECT-TYPE
Trap data, IO line memo
1.3.6.1.4.1.25728.8900.2.6DisplayStringread-onlycurrent

Notifications

NameOIDStatus
npCurLoopTrap
NOTIFICATION-TYPE
Status of current loop N has changed!
1.3.6.1.4.1.25728.8300.2.0.1current
npThermoTrap
NOTIFICATION-TYPE
Status of Thermo sensor is changed (crossing of normal temp. range)
1.3.6.1.4.1.25728.8800.2.0.1current
npIoTrap
NOTIFICATION-TYPE
Input state of IO line is changed
1.3.6.1.4.1.25728.8900.2.0.1current