MIBs Depot

DKSF-54-1-X-X-1

Registered at
1.3.6.1.4.1.25728.54
Last updated
2015-03-02 00:00
Organization
Alentis Electronics
Revisions
2015-03-02 00:00, 2014-06-19 00:00
Namespace
netping
Source file
DKSF-54-1-X-X-1
Digest
sha256:003ce418cee4a45881cd7ee456ece347e2b753c5077bf1cad51016ae74ab89ea

Description

MIB for NetPing 4PWR-220/SMS remote sensing and control

Contact

developers@netping.ru

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-MIBsnmpTraps
SNMPv2-SMICounter32, Counter64, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, enterprises, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TimeStamp, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

DKSF-54-1-X-X-1
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
lightcom
OBJECT-IDENTITY
1.3.6.1.4.1.25728
npReboot
OBJECT-IDENTITY
1.3.6.1.4.1.25728.911
npSoftReboot
OBJECT-TYPE
Write 1 to reboot device after current operations completition
1.3.6.1.4.1.25728.911.1INTEGERread-writecurrent
npResetStack
OBJECT-TYPE
Write 1 to re-initialize network stack
1.3.6.1.4.1.25728.911.2INTEGERread-writecurrent
npForcedReboot
OBJECT-TYPE
Write 1 to immediate forced reboot
1.3.6.1.4.1.25728.911.3INTEGERread-writecurrent
npGsm
OBJECT-IDENTITY
1.3.6.1.4.1.25728.3800
npGsmInfo
OBJECT-IDENTITY
1.3.6.1.4.1.25728.3800.1
npGsmFailed
OBJECT-TYPE
Firmware's GSM module status
1.3.6.1.4.1.25728.3800.1.1INTEGER {ok(0), failed(1), fatalError(2)}read-onlycurrent
npGsmRegistration
OBJECT-TYPE
Status of modem registration in GSM network (AT+CREG? result)
1.3.6.1.4.1.25728.3800.1.2INTEGER {impossible(0), homeNetwork(1), searching(2), denied(3), unknown(4), roaming(5), infoUpdate(255)}read-onlycurrent
npGsmStrength
OBJECT-TYPE
GSM signal strength. 0..31 = 0..100%, 99 = unknown or n/a, 255 = updating info
1.3.6.1.4.1.25728.3800.1.3INTEGER (0..255)read-onlycurrent
npGsmSendSms
OBJECT-TYPE
Send arbitrary SMS. Format: [phone_number,phone_number,...] Message One to four destination phone numbers If [] and numbers omitted, mesagge will be sent to preset numbers from SMS setup Only Latin characters allowed in message body
1.3.6.1.4.1.25728.3800.1.9DisplayStringread-writecurrent
npGsmTraps
OBJECT-IDENTITY
1.3.6.1.4.1.25728.3800.2
npGsmTrapPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.25728.3800.2.0
npBattery
OBJECT-IDENTITY
1.3.6.1.4.1.25728.3900
npBatteryInfo
OBJECT-IDENTITY
1.3.6.1.4.1.25728.3900.1
npBatteryPok
OBJECT-TYPE
Power source
1.3.6.1.4.1.25728.3900.1.1INTEGER {batteryPower(0), externalPower(1)}read-onlycurrent
npBatteryLevel
OBJECT-TYPE
Battery charge, approximate value, in percent. Valid only if npBatteryPok = 0
1.3.6.1.4.1.25728.3900.1.2INTEGER (0..100)read-onlycurrent
npBatteryChg
OBJECT-TYPE
Battery chargeing status. 0 if charging suspended or battery is full, 1 while LiPo fast charging.
1.3.6.1.4.1.25728.3900.1.3INTEGER {batteryChargingSuspended(0), batteryFastCharging(1)}read-onlycurrent
npRelay
OBJECT-IDENTITY
1.3.6.1.4.1.25728.5500
npRelayTable
OBJECT-TYPE
Watchdog and outlet/relay control table
1.3.6.1.4.1.25728.5500.5not-accessiblecurrent
npRelayEntry
OBJECT-TYPE
Relay/outlet table row
1.3.6.1.4.1.25728.5500.5.1not-accessiblecurrent
npRelayN
OBJECT-TYPE
The N of output relay
1.3.6.1.4.1.25728.5500.5.1.1INTEGER (1..4)read-onlycurrent
npRelayMode
OBJECT-TYPE
Control of relay: -1 - flip between on(1) and off(0) 0 - manual off 1 - manual on 2 - watchdog 3 - schedule 4 - both schedule and watchdog (while switched on by schedule) 5 - logic
1.3.6.1.4.1.25728.5500.5.1.2INTEGER {flip(-1), off(0), on(1), watchdog(2), schedule(3), scheduleAndWatchdog(4), logic(5)}read-writecurrent
npRelayStartReset
OBJECT-TYPE
Write 1 to start reset (switch relay off for some time)
1.3.6.1.4.1.25728.5500.5.1.3INTEGERread-writecurrent
npRelayMemo
OBJECT-TYPE
Relay memo
1.3.6.1.4.1.25728.5500.5.1.6DisplayStringread-onlycurrent
npRelayFlip
OBJECT-TYPE
Write -1 to flip between manual on and manual off states of relay
1.3.6.1.4.1.25728.5500.5.1.14INTEGER {flip(-1)}read-onlycurrent
npRelayState
OBJECT-TYPE
Actual relay state at the moment, regardless of source of control. 0 - relay is off 1 - relay is on
1.3.6.1.4.1.25728.5500.5.1.15INTEGER {off(0), on(1)}read-onlycurrent
npRelayPowered
OBJECT-TYPE
AC presence on output (relay operation check) 0 - no AC on output socket 1 - AC is present on oputput
1.3.6.1.4.1.25728.5500.5.1.16INTEGER {no(0), yes(1)}read-onlycurrent
npPwr
OBJECT-IDENTITY
1.3.6.1.4.1.25728.5800
npPwrTable
OBJECT-TYPE
Watchdog and outlet/relay control table
1.3.6.1.4.1.25728.5800.3not-accessiblecurrent
npPwrEntry
OBJECT-TYPE
Watchdog control table row
1.3.6.1.4.1.25728.5800.3.1not-accessiblecurrent
npPwrChannelN
OBJECT-TYPE
The id of watchdog/power channel
1.3.6.1.4.1.25728.5800.3.1.1INTEGER (1..4)read-onlycurrent
npPwrStartReset
OBJECT-TYPE
Deprecated in current FW version: Write 1 to start forced reset. On read: 0 - normal operation 1 - reset is active 2 - reboot pause is active or watchdog is inactive
1.3.6.1.4.1.25728.5800.3.1.2INTEGER (0..2)read-onlyobsolete
npPwrResetsCounter
OBJECT-TYPE
Counter of watchdog resets Write 0 to clear.
1.3.6.1.4.1.25728.5800.3.1.4INTEGER (0..65535)read-writecurrent
npPwrRepeatingResetsCounter
OBJECT-TYPE
Counter of continous failed watchdog resets
1.3.6.1.4.1.25728.5800.3.1.5INTEGER (0..65535)read-onlycurrent
npPwrMemo
OBJECT-TYPE
Watchdog channel memo
1.3.6.1.4.1.25728.5800.3.1.6DisplayStringread-onlycurrent
npRelHumidity
OBJECT-IDENTITY
1.3.6.1.4.1.25728.8400
npRelHumSensor
OBJECT-IDENTITY
1.3.6.1.4.1.25728.8400.2
npRelHumSensorValueH
OBJECT-TYPE
Relative humidity value, %
1.3.6.1.4.1.25728.8400.2.2INTEGER (0..100)read-onlycurrent
npRelHumSensorStatus
OBJECT-TYPE
Status of the Rel.Humidity Sensor One 1=Normal, 0=Error or Sensor isn't connected
1.3.6.1.4.1.25728.8400.2.3INTEGER {error(0), ok(1)}read-onlycurrent
npRelHumSensorValueT
OBJECT-TYPE
Sensor temperature, deg.C
1.3.6.1.4.1.25728.8400.2.4INTEGER (-60..200)read-onlycurrent
npRelHumSensorStatusH
OBJECT-TYPE
Status of Relative Humiduty
1.3.6.1.4.1.25728.8400.2.5INTEGER {sensorFailed(0), belowSafeRange(1), inSafeRange(2), aboveSafeRange(3)}read-onlycurrent
npRelHumSafeRangeHigh
OBJECT-TYPE
Relative Humidity safe range, top margin, %RH
1.3.6.1.4.1.25728.8400.2.7INTEGER (0..100)read-onlycurrent
npRelHumSafeRangeLow
OBJECT-TYPE
Relative Humidity safe range, bottom margin, %RH
1.3.6.1.4.1.25728.8400.2.8INTEGER (0..100)read-onlycurrent
npRelHumSensorValueT100
OBJECT-TYPE
Sensor temperature, deg.C * 100 (fixed point two decimal places) Used to get access to the fractional part of T value
1.3.6.1.4.1.25728.8400.2.9Integer32read-onlycurrent
npRelHumTraps
OBJECT-IDENTITY
1.3.6.1.4.1.25728.8400.9
npRelHumTrapPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.25728.8400.9.0
npThermo
OBJECT-IDENTITY
1.3.6.1.4.1.25728.8800
npThermoTable
OBJECT-TYPE
Thermo Sensors Table
1.3.6.1.4.1.25728.8800.1not-accessiblecurrent
npThermoEntry
OBJECT-TYPE
Thermo Sensors Table Row
1.3.6.1.4.1.25728.8800.1.1not-accessiblecurrent
npThermoSensorN
OBJECT-TYPE
The id of temperature sensor, 1 to 8
1.3.6.1.4.1.25728.8800.1.1.1INTEGER (1..8)read-onlycurrent
npThermoValue
OBJECT-TYPE
Temperature, deg.C
1.3.6.1.4.1.25728.8800.1.1.2INTEGER (-60..280)read-onlycurrent
npThermoStatus
OBJECT-TYPE
Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat)
1.3.6.1.4.1.25728.8800.1.1.3INTEGER {failed(0), low(1), norm(2), high(3)}read-onlycurrent
npThermoLow
OBJECT-TYPE
Bottom margin of normal temperature range, deg.C
1.3.6.1.4.1.25728.8800.1.1.4INTEGER (-60..280)read-onlycurrent
npThermoHigh
OBJECT-TYPE
Top margin of normal temperature range, deg.C
1.3.6.1.4.1.25728.8800.1.1.5INTEGER (-60..280)read-onlycurrent
npThermoMemo
OBJECT-TYPE
T channel memo
1.3.6.1.4.1.25728.8800.1.1.6DisplayStringread-onlycurrent
npThermoTraps
OBJECT-IDENTITY
1.3.6.1.4.1.25728.8800.2
npThermoTrapPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.25728.8800.2.0
npThermoTrapSensorN
OBJECT-TYPE
The id of temperature sensor, 1 to 8
1.3.6.1.4.1.25728.8800.2.1INTEGER (1..8)read-onlycurrent
npThermoTrapValue
OBJECT-TYPE
Temperature, deg.C
1.3.6.1.4.1.25728.8800.2.2INTEGER (-60..280)read-onlycurrent
npThermoTrapStatus
OBJECT-TYPE
Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat)
1.3.6.1.4.1.25728.8800.2.3INTEGER {failed(0), low(1), norm(2), high(3)}read-onlycurrent
npThermoTrapLow
OBJECT-TYPE
Bottom margin of normal temperature range, deg.C
1.3.6.1.4.1.25728.8800.2.4INTEGER (-60..280)read-onlycurrent
npThermoTrapHigh
OBJECT-TYPE
Top margin of normal temperature range, deg.C
1.3.6.1.4.1.25728.8800.2.5INTEGER (-60..280)read-onlycurrent
npThermoTrapMemo
OBJECT-TYPE
T channel memo
1.3.6.1.4.1.25728.8800.2.6DisplayStringread-onlycurrent

Notifications

NameOIDStatus
npGsmTrap
NOTIFICATION-TYPE
GSM modem or SMS firmware problems
1.3.6.1.4.1.25728.3800.2.0.1current
npRelHumTrap
NOTIFICATION-TYPE
Status of Relative Humidity RH sensor has changed!
1.3.6.1.4.1.25728.8400.9.0.1current
npThermoTrap
NOTIFICATION-TYPE
Status of Thermo sensor is changed (crossing of normal temp. range)
1.3.6.1.4.1.25728.8800.2.0.1current