DHCP-RELAY-MGMT-MIB
- Registered at
- 1.3.6.1.4.1.171.12.42
- Last updated
- 2013-10-11 00:00
- Organization
- D-Link Corp.
- Namespace
- dlink
- Source file
DHCP-RELAY-MGMT-MIB- Digest
sha256:326dbe43dbfd2e90b11ffca2c63f37c891c3f2a384644be58255fee1f5442565
Description
The structure of DHCP relay management for the proprietary enterprise.
Contact
http://support.dlink.com
Imports
| From | Symbols |
|---|---|
| DLINK-ID-REC-MIB | dlink-common-mgmt |
| Q-BRIDGE-MIB | VlanId |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BRIDGE-MIB DHCP-RELAY-MGMT-MIB DLINK-ID-REC-MIB IANAifType-MIB IF-MIB P-BRIDGE-MIB Q-BRIDGE-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| swDHCPRelayCtrl OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.42.1 | |||
| swDHCPRelayState OBJECT-TYPE This object indicates whether the DHCP relay function is enabled or disabled. | 1.3.6.1.4.1.171.12.42.1.1 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| swDHCPRelayHopCount OBJECT-TYPE This object indicates the maximum number of router hops that the BOOTP packets can cross. | 1.3.6.1.4.1.171.12.42.1.2 | INTEGER (1..16) | read-write | current |
| swDHCPRelayTimeThreshold OBJECT-TYPE This object indicates the minimum time in seconds within which the switch must relay the DHCP request. If this time is exceeded, the switch will drop the DHCP packet. | 1.3.6.1.4.1.171.12.42.1.3 | INTEGER (0..65535) | read-write | current |
| swDHCPRelayInfo OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.42.2 | |||
| swDHCPRelayMgmt OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.42.3 | |||
| swDHCPRelayCtrlTable OBJECT-TYPE This table indicates the IP address as a destination to forward (relay) DHCP packets to. | 1.3.6.1.4.1.171.12.42.3.1 | not-accessible | current | |
| swDHCPRelayCtrlEntry OBJECT-TYPE A list of information indicates the IP address as a destination to forward (relay) DHCP packets to. | 1.3.6.1.4.1.171.12.42.3.1.1 | not-accessible | current | |
| swDHCPRelayCtrlInterfaceName OBJECT-TYPE This object indicates the name of the IP interface. | 1.3.6.1.4.1.171.12.42.3.1.1.1 | DisplayString (SIZE(0..12)) | read-only | current |
| swDHCPRelayCtrlServer OBJECT-TYPE This object indicates the DHCP server IP address. | 1.3.6.1.4.1.171.12.42.3.1.1.2 | IpAddress | read-only | current |
| swDHCPRelayCtrlRowStatus OBJECT-TYPE This object indicates the status of this entry. | 1.3.6.1.4.1.171.12.42.3.1.1.3 | RowStatus | read-create | current |
| swDHCPRelayOption82 OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.42.3.2 | |||
| swDHCPRelayOption82State OBJECT-TYPE This object indicates whether the DHCP relay option 82 function is enabled or disabled. | 1.3.6.1.4.1.171.12.42.3.2.1 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| swDHCPRelayOption82CheckState OBJECT-TYPE This object indicates whether the DHCP relay option 82 check function is enabled or disabled. | 1.3.6.1.4.1.171.12.42.3.2.2 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| swDHCPRelayOption82Policy OBJECT-TYPE This object indicates the DHCP relay option 82 policy. | 1.3.6.1.4.1.171.12.42.3.2.3 | INTEGER {replace(1), drop(2), keep(3)} | read-write | current |
| swDHCPRelayOption82RemoteIDType OBJECT-TYPE This object indicates the type of remote ID. If the type is default,the remote ID will be the System¡¯s MAC address. If the type is user-defined, the remote ID can be defined by writing to the swDHCPRelayOption82RemoteID object. If the type is vendor2, the remote ID will be the System Name. If the type is vendor3, the remote ID will configured in swDHCPRelayOption82PerPortRemoteIdTable | 1.3.6.1.4.1.171.12.42.3.2.4 | INTEGER {default(1), user-defined(2), vendor2(4), vendor3(5)} | read-write | current |
| swDHCPRelayOption82RemoteID OBJECT-TYPE This object displays the current remote ID of the device. If swDHCPRelayOption82RemoteIDType is set to default, the value will be the MAC address of the device, and this object cannot be modified. If swDHCPRelayOption82RemoteIDType is set to vendor2, the remote ID will be theSystem Name., and this object cannot be modified.If swDHCPRelayOption82RemoteIDType is set to user-defined, a new value can be written to this object. | 1.3.6.1.4.1.171.12.42.3.2.5 | DisplayString | read-write | current |
| swDHCPRelayOption82CircuitIDType OBJECT-TYPE This object indicates the type of circuit ID.If the type is default,the circuit ID will be the VLAN ID, Module ID and Port Number. If the type is user-defined ,the circuit ID can be defined by writing to the swDHCPRelayOption82CircuitId object.If the type is vendor1, the circuit ID will be the VLAN ID, Slot ID, Port Number and System¡¯s MAC address. If the type is vendor2, the circuit ID will be the Port Number.If the type is vendor3,the circuit ID will be configured in swDHCPRelayOption82PerPortCircuitIdTable If the type is vendor4, the circuit ID will be the System Name, Module ID, Port Number and Client VLAN ID. If the type is vendor5, the circuit ID will be the System Name, 'eth', Chassis ID, Slot ID, Port Number and Client VLAN ID. If the type is vendor6, the circuit ID will be the Port Name, VLAN ID, System Name, Slot ID, Sub Slot ID, Port Number. | 1.3.6.1.4.1.171.12.42.3.2.6 | INTEGER {default(1), user-defined(2), vendor1(3), vendor2(4), vendor3(5), vendor4(6), vendor5(7), vendor6(8)} | read-write | current |
| swDHCPRelayOption82CircuitID OBJECT-TYPE This object displays the current circuit ID of the device. If swDHCPRelayOption82CircuitIDType is set to user-defined, a new value can be written to this object. If swDHCPRelayOption82CircuitIdType is set to other, the value will be display and cannot be modified. | 1.3.6.1.4.1.171.12.42.3.2.7 | DisplayString | read-write | current |
| swDHCPRelayOption82PerPortRemoteIdTable OBJECT-TYPE This table is used to manage the DHCP relay Option82 Remote ID for each client.And this configure will override the configure of swDHCPRelayOption82RemoteId for this client. | 1.3.6.1.4.1.171.12.42.3.2.8 | not-accessible | current | |
| swDHCPRelayOption82PerPortRemoteIdEntry OBJECT-TYPE This object lists indicates the DHCP relay Option82 Remote ID for each client. | 1.3.6.1.4.1.171.12.42.3.2.8.1 | not-accessible | current | |
| swDHCPRelayOption82PerPortRemoteIdPortIndex OBJECT-TYPE This object indicates the Client's port number. | 1.3.6.1.4.1.171.12.42.3.2.8.1.1 | INTEGER | not-accessible | current |
| swDHCPRelayOption82PerPortRemoteIdType OBJECT-TYPE This object indicates the type of port's remote ID. If the type is vendor3, the remote ID can be defined by writing to the swDHCPRelayOption82PerPortRemoteIdValue object. | 1.3.6.1.4.1.171.12.42.3.2.8.1.2 | INTEGER {vendor3(5)} | read-write | current |
| swDHCPRelayOption82PerPortRemoteIdValue OBJECT-TYPE This object displays the current remote ID of the special port. If swDHCPRelayOption82PerPortRemoteIdType is set to vendor3,a new value can be written to this object. | 1.3.6.1.4.1.171.12.42.3.2.8.1.3 | DisplayString | read-write | current |
| swDHCPRelayOption82PerPortCircuitIdTable OBJECT-TYPE This table is used to manage the DHCP relay Option82 Circuit ID for each client.And this configure will override the configure of swDHCPRelayOption82CircuitId for this client. | 1.3.6.1.4.1.171.12.42.3.2.9 | not-accessible | current | |
| swDHCPRelayOption82PerPortCircuitIdEntry OBJECT-TYPE This object lists indicates the DHCP relay Option82 Circuit ID for each client. | 1.3.6.1.4.1.171.12.42.3.2.9.1 | not-accessible | current | |
| swDHCPRelayOption82PerPortCircuitIdPortIndex OBJECT-TYPE This object indicates the module's port number.(1..Max port number in the module) | 1.3.6.1.4.1.171.12.42.3.2.9.1.1 | INTEGER | not-accessible | current |
| swDHCPRelayOption82PerPortCircuitIdType OBJECT-TYPE This object indicates the type of client's circuit ID.If the type is vendor3,the circuit ID can be defined by writing to the swDHCPRelayOption82PerPortCircuitIdValue object. | 1.3.6.1.4.1.171.12.42.3.2.9.1.2 | INTEGER {vendor3(5)} | read-write | current |
| swDHCPRelayOption82PerPortCircuitIdValue OBJECT-TYPE This object displays the current circuit ID of client. If swDHCPRelayOption82PerPortCircuitIdType is set to vendor3, a new value can be written to this object. | 1.3.6.1.4.1.171.12.42.3.2.9.1.3 | DisplayString | read-write | current |
| swDHCPRelayOption60 OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.42.3.3 | |||
| swDHCPRelayOption60State OBJECT-TYPE This object indicates whether the DHCP relay option 60 function is enabled or disabled. | 1.3.6.1.4.1.171.12.42.3.3.1 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| swDHCPRelayOption60DefMode OBJECT-TYPE This object indicates default mode that has no option 60 matching rules. relay (1): means to relay the packet to the IP address which is specified by swDHCPRelayOption60DefRelayIp. drop (2): means to drop the packet. | 1.3.6.1.4.1.171.12.42.3.3.2 | INTEGER {relay(1), drop(2)} | read-write | current |
| swDHCPRelayOption60DefTable OBJECT-TYPE This table indicates the default relay servers for the packet that has no option 60 matching rules. | 1.3.6.1.4.1.171.12.42.3.3.3 | not-accessible | current | |
| swDHCPRelayOption60DefEntry OBJECT-TYPE A list of information indicates the default relay servers for the packet that has no option 60 matching rules. | 1.3.6.1.4.1.171.12.42.3.3.3.1 | not-accessible | current | |
| swDHCPRelayOption60DefRelayIp OBJECT-TYPE This object indicates the IP address of the default relay server. | 1.3.6.1.4.1.171.12.42.3.3.3.1.1 | IpAddress | read-only | current |
| swDHCPRelayOption60DefRowStatus OBJECT-TYPE This object indicates the status of this entry. | 1.3.6.1.4.1.171.12.42.3.3.3.1.2 | RowStatus | read-create | current |
| swDHCPRelayOption60Table OBJECT-TYPE This table indicates the relay servers for the packet for option 60 rules. | 1.3.6.1.4.1.171.12.42.3.3.4 | not-accessible | current | |
| swDHCPRelayOption60Entry OBJECT-TYPE A list of information indicates the relay servers for the packet for option 60 rules. | 1.3.6.1.4.1.171.12.42.3.3.4.1 | not-accessible | current | |
| swDHCPRelayOption60String OBJECT-TYPE This object indicates the string of this entry. Note that it is theoretically possible for a valid string to exceed the allowed length of an SNMP object identifier, and thus be impossible to represent in tables in this MIB that are indexed by string. | 1.3.6.1.4.1.171.12.42.3.3.4.1.1 | DisplayString | read-only | current |
| swDHCPRelayOption60RelayIp OBJECT-TYPE This object indicates the IP address of the relay server. | 1.3.6.1.4.1.171.12.42.3.3.4.1.2 | IpAddress | read-only | current |
| swDHCPRelayOption60MatchType OBJECT-TYPE This object indicates the match state of this entry. exact (1): Means the option 60 string in the packet must fully match the specified string. partial (2): Means the option 60 string in the packet only needs to partially match the specified string. | 1.3.6.1.4.1.171.12.42.3.3.4.1.3 | INTEGER {exact(1), partial(2)} | read-create | current |
| swDHCPRelayOption60RowStatus OBJECT-TYPE This object indicates the status of this entry. | 1.3.6.1.4.1.171.12.42.3.3.4.1.4 | RowStatus | read-create | current |
| swDHCPRelayOption61 OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.42.3.4 | |||
| swDHCPRelayOption61State OBJECT-TYPE This object indicates whether the DHCP relay option 61 function is enabled or disabled. | 1.3.6.1.4.1.171.12.42.3.4.1 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| swDHCPRelayOption61DefMode OBJECT-TYPE This object indicates the default mode has no option 61 matching rules. relay (1): Means to relay the packet to the IP address which is specified by swDHCPRelayOption61DefRelayIp. drop (2): Means to drop the packet. | 1.3.6.1.4.1.171.12.42.3.4.2 | INTEGER {relay(1), drop(2)} | read-write | current |
| swDHCPRelayOption61DefRelayIp OBJECT-TYPE This object indicates the IP address of the default relay server has no option 61 matching rules. Pay attention to when swDHCPRelayOption61Mode is: relay (1): This object must be set together. drop (2): This object can not be set, and it always returns to '0.0.0.0'. | 1.3.6.1.4.1.171.12.42.3.4.3 | IpAddress | read-write | current |
| swDHCPRelayOption61Table OBJECT-TYPE This table indicates the relay servers for the packet for option 61 rules. | 1.3.6.1.4.1.171.12.42.3.4.4 | not-accessible | current | |
| swDHCPRelayOption61Entry OBJECT-TYPE A list of information indicates the relay servers for the packet for option 61 rules. | 1.3.6.1.4.1.171.12.42.3.4.4.1 | not-accessible | current | |
| swDHCPRelayOption61ClientType OBJECT-TYPE This object indicates the client type of this entry. mac (1): Means the client-ID which is the MAC address of a client. string (2): Means the client-ID which is specified string by an administrator. | 1.3.6.1.4.1.171.12.42.3.4.4.1.1 | INTEGER {mac(1), string(2)} | read-only | current |
| swDHCPRelayOption61ClientID OBJECT-TYPE This object indicates the string of this entry. Note: When the swDHCPRelayOption61ClientType is mac (1), the format of this object should be XX.XX.XX.XX.XX.XX (MAC address). When the swDHCPRelayOption61ClientType is string (2), it is theoretically possible for a valid string to exceed the allowed length of an SNMP object identifier, and thus be impossible to represent in tables in this MIB that are indexed by the string. | 1.3.6.1.4.1.171.12.42.3.4.4.1.2 | DisplayString | read-only | current |
| swDHCPRelayOption61Mode OBJECT-TYPE This object indicates mode of this entry. relay (1): Means to relay the packet to the IP address which is specified by swDHCPRelayOption61RelayIp. drop (2): Means to drop the packet. | 1.3.6.1.4.1.171.12.42.3.4.4.1.3 | INTEGER {relay(1), drop(2)} | read-create | current |
| swDHCPRelayOption61RelayIp OBJECT-TYPE This object indicates the IP address of the relay server. Pay attention to when swDHCPRelayOption61Mode is: relay (1): This object must be set together. drop (2): This object can not be set, and it always returns to '0.0.0.0'. | 1.3.6.1.4.1.171.12.42.3.4.4.1.4 | IpAddress | read-create | current |
| swDHCPRelayOption61RowStatus OBJECT-TYPE This object indicates the status of this entry. | 1.3.6.1.4.1.171.12.42.3.4.4.1.5 | RowStatus | read-create | current |
| swDHCPRelayVlanCtrlTable OBJECT-TYPE This table indicates the IP address as a destination to forward (relay) DHCP packets to. | 1.3.6.1.4.1.171.12.42.3.5 | not-accessible | current | |
| swDHCPRelayVlanCtrlEntry OBJECT-TYPE A list of information indicates the IP address as a destination to forward (relay) DHCP packets to. | 1.3.6.1.4.1.171.12.42.3.5.1 | not-accessible | current | |
| swDHCPRelayVlanCtrlServer OBJECT-TYPE This object indicates the DHCP server IP address. | 1.3.6.1.4.1.171.12.42.3.5.1.1 | IpAddress | not-accessible | current |
| swDHCPRelayVlanCtrlVlanRangeList1to64 OBJECT-TYPE This object indicates the VLAN range (1-512) that added the specific server. | 1.3.6.1.4.1.171.12.42.3.5.1.2 | OCTET STRING (SIZE(64)) | read-create | current |
| swDHCPRelayVlanCtrlVlanRangeList65to128 OBJECT-TYPE This object indicates the VLAN range (513-1024) that added the specific server. | 1.3.6.1.4.1.171.12.42.3.5.1.3 | OCTET STRING (SIZE(64)) | read-create | current |
| swDHCPRelayVlanCtrlVlanRangeList129to192 OBJECT-TYPE This object indicates the VLAN range (1025-1536) that added the specific server. | 1.3.6.1.4.1.171.12.42.3.5.1.4 | OCTET STRING (SIZE(64)) | read-create | current |
| swDHCPRelayVlanCtrlVlanRangeList193to256 OBJECT-TYPE This object indicates the VLAN range (1537-2048) that added the specific server. | 1.3.6.1.4.1.171.12.42.3.5.1.5 | OCTET STRING (SIZE(64)) | read-create | current |
| swDHCPRelayVlanCtrlVlanRangeList257to320 OBJECT-TYPE This object indicates the VLAN range (2049-2560) that added the specific server. | 1.3.6.1.4.1.171.12.42.3.5.1.6 | OCTET STRING (SIZE(64)) | read-create | current |
| swDHCPRelayVlanCtrlVlanRangeList321to384 OBJECT-TYPE This object indicates the VLAN range (2561-3072) that added the specific server. | 1.3.6.1.4.1.171.12.42.3.5.1.7 | OCTET STRING (SIZE(64)) | read-create | current |
| swDHCPRelayVlanCtrlVlanRangeList385to448 OBJECT-TYPE This object indicates the VLAN range (3073-3584) that added the specific server. | 1.3.6.1.4.1.171.12.42.3.5.1.8 | OCTET STRING (SIZE(64)) | read-create | current |
| swDHCPRelayVlanCtrlVlanRangeList449to512 OBJECT-TYPE This object indicates the VLAN range (3585-4096) that added the specific server. | 1.3.6.1.4.1.171.12.42.3.5.1.9 | OCTET STRING (SIZE(64)) | read-create | current |
| swDHCPRelayVlanCtrlRowStatus OBJECT-TYPE This object indicates the status of this entry. | 1.3.6.1.4.1.171.12.42.3.5.1.10 | RowStatus | read-create | current |
| swDHCPRelayPortStateCtrlTable OBJECT-TYPE This table is used to manage the DHCP relay state for each port. | 1.3.6.1.4.1.171.12.42.3.6 | not-accessible | current | |
| swDHCPRelayPortStateCtrlEntry OBJECT-TYPE This object lists the current ports in the switch and their corresponding DHCP relay state. | 1.3.6.1.4.1.171.12.42.3.6.1 | not-accessible | current | |
| swDHCPRelayPortStateCtrlPortIndex OBJECT-TYPE This object indicates the module's port number.(1..Max port number in the module) | 1.3.6.1.4.1.171.12.42.3.6.1.1 | INTEGER | not-accessible | current |
| swDHCPRelayPortStateCtrlState OBJECT-TYPE This object indicates the state of the DHCP relay of each port. | 1.3.6.1.4.1.171.12.42.3.6.1.2 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| swDHCPRelaySendArpByCidTable OBJECT-TYPE This table is used to manage the DHCP relay send ARP to DHCP Server include the inner vid. | 1.3.6.1.4.1.171.12.42.3.7 | not-accessible | current | |
| swDHCPRelaySendArpByCidEntry OBJECT-TYPE This object lists the current each DHCP Server configuration inner vid. | 1.3.6.1.4.1.171.12.42.3.7.1 | not-accessible | current | |
| swDHCPRelaySendArpByCidInnerVid OBJECT-TYPE This object indicates the inner vid or null vid. 0: not insert inner vid. 1-4094: inner vid. | 1.3.6.1.4.1.171.12.42.3.7.1.1 | INTEGER (0..4094) | read-write | current |
| swDHCPLocalRelayMgmt OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.42.4 | |||
| swDHCPLocalRelayGlobalState OBJECT-TYPE This object indicates the state of the DHCP local relay function of the switch. | 1.3.6.1.4.1.171.12.42.4.1 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| swDHCPLocalRelayVlanTable OBJECT-TYPE This table is used to manage the DHCP local relay status for each VLAN. | 1.3.6.1.4.1.171.12.42.4.2 | not-accessible | current | |
| swDHCPLocalRelayVlanEntry OBJECT-TYPE This object lists the current VLANs in the switch and their corresponding DHCP local relay status. | 1.3.6.1.4.1.171.12.42.4.2.1 | not-accessible | current | |
| swDHCPLocalRelayVlanID OBJECT-TYPE This object indicates the VLAN ID. | 1.3.6.1.4.1.171.12.42.4.2.1.1 | VlanId | not-accessible | current |
| swDHCPLocalRelayState OBJECT-TYPE This object indicates the state of the DHCP relay function of the specified VLAN. | 1.3.6.1.4.1.171.12.42.4.2.1.2 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| swDHCPLocalRelayOption82Table OBJECT-TYPE This table is used to manage the DHCP local relay option 82 policy for each port. | 1.3.6.1.4.1.171.12.42.4.3 | not-accessible | current | |
| swDHCPLocalRelayOption82Entry OBJECT-TYPE This object lists the current ports in the switch and their corresponding DHCP local relay option 82 policy. | 1.3.6.1.4.1.171.12.42.4.3.1 | not-accessible | current | |
| swDHCPLocalRelayOption82PortIndex OBJECT-TYPE This object indicates the module's port number.(1..Max port number in the module) | 1.3.6.1.4.1.171.12.42.4.3.1.1 | INTEGER (0..65535) | not-accessible | current |
| swDHCPLocalRelayOption82Policy OBJECT-TYPE This object indicates the policy of the DHCP local relay option 82 of each port. | 1.3.6.1.4.1.171.12.42.4.3.1.2 | INTEGER {replace(1), drop(2), keep(3)} | read-write | current |