MIBs Depot

DGS-3120-24TC-L3MGMT-MIB

Registered at
1.3.6.1.4.1.171.11.117.2.1.3
Last updated
1912-11-07 00:00
Organization
Namespace
dlink
Source file
DGS-3120-24TC-L3MGMT-MIB
Digest
sha256:d37fdd07cd5c51a9586a302d4a239e353cb0c90ac214ecd2bf514ef729a8682d

Description

The Structure of Layer 3 Network Management Information for the proprietary enterprise.

Imports

FromSymbols
IPV6-TCIpv6Address
OSPF-MIBAreaID, DesignatedRouterPriority, HelloRange, Metric, PositiveInteger, RouterID, Status, TOSType, UpToMaxAge
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue
SWDGS3120PRIMGMT-MIBdlink-Dgs3120Proj-DGS-3120-24TC-bx

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

DGS-3120-24TC-L3MGMT-MIB
DLINK-ID-REC-MIB
IANAifType-MIB
IF-MIB
IPV6-TC
OSPF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
SWDGS3120PRIMGMT-MIB

Textual conventions

NameOIDSyntaxAccessStatus
NetAddress
type
NodeAddress
type
VrId
TEXTUAL-CONVENTION
A number which, along with an interface index (ifIndex), serves to uniquely identify a virtual router on a given VRRP router. A set of one or more associated addresses is assigned to a VRID.
current

Objects

NameOIDSyntaxAccessStatus
swL3DevMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.2.1.3.1
swL3DevCtrl
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.2.1.3.1.1
swL3DevCtrlRIPState
OBJECT-TYPE
This object indicates if the Routing Information Protocol (RIP) version 2 function is enabled or disabled.
1.3.6.1.4.1.171.11.117.2.1.3.1.1.1INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL3DevCtrlOSPFState
OBJECT-TYPE
This object indicates OSPF protocol is enabled or disabled.
1.3.6.1.4.1.171.11.117.2.1.3.1.1.2INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL3DevCtrlDVMRPState
OBJECT-TYPE
This object indicates DVMRP protocol is enabled or disabled.
1.3.6.1.4.1.171.11.117.2.1.3.1.1.3INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL3DevCtrlVRRPState
OBJECT-TYPE
This object indicates VRRP protocol is enabled or disabled.
1.3.6.1.4.1.171.11.117.2.1.3.1.1.5INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL3DevCtrlVrrpPingState
OBJECT-TYPE
This object indicates VRRP protocol Ping is enabled or disabled.
1.3.6.1.4.1.171.11.117.2.1.3.1.1.6INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL3IpMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.2.1.3.2
swL3IpCtrlMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.2.1.3.2.1
swL3IpCtrlTable
OBJECT-TYPE
This table contain IP interface information.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.3not-accessiblecurrent
swL3IpCtrlEntry
OBJECT-TYPE
A list of information about a specific IP interface.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.3.1not-accessiblecurrent
swL3IpCtrlInterfaceName
OBJECT-TYPE
This object indicates the name of the IP interface.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.3.1.1DisplayString (SIZE(1..12))read-onlycurrent
swL3IpCtrlIfIndex
OBJECT-TYPE
This object uniquely identifies the IP interface number in the swL3IpCtrlTable.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.3.1.2INTEGER (0..65535)read-onlycurrent
swL3IpCtrlIpAddr
OBJECT-TYPE
The IP address of the interface. This object only can take the value of the unicast IP address.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.3.1.3IpAddressread-writecurrent
swL3IpCtrlIpSubnetMask
OBJECT-TYPE
The IP net mask for this interface.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.3.1.4IpAddressread-writecurrent
swL3IpCtrlVlanName
OBJECT-TYPE
This object indicates the IP control entry's VLAN name. The VLAN name in each entry must be unique in the IP Control Table.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.3.1.5DisplayString (SIZE(0..32))read-writecurrent
swL3IpCtrlProxyArp
OBJECT-TYPE
This object indicates enable/disable of the proxy ARP function for IPv4.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.3.1.6INTEGER {enabled(1), disabled(2)}read-writecurrent
swL3IpCtrlSecondary
OBJECT-TYPE
When this is true(1), the IP address is the secondary IP. When false(2), the IP address is the primary IP.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.3.1.7TruthValueread-writecurrent
swL3IpCtrlMode
OBJECT-TYPE
This object indicates the IP operation mode. other(1) - This entry is currently in use but the conditions under which it will remain are determined by each of the following values. bootp(3) - The IP address will be set automatically from a BOOTP server. dhcp(4) - The IP address will be set automatically from a DHCP server.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.3.1.8INTEGER {other(1), bootp(3), dhcp(4)}read-writecurrent
swL3IpCtrlAdminState
OBJECT-TYPE
The state of the IP interface.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.3.1.9INTEGER {enabled(1), disabled(2)}read-writecurrent
swL3IpCtrlIpv4AdminState
OBJECT-TYPE
The IPv4 admin state of the IP interface. The default state is determined by project. This state will only be effective when the swL3IpCtrlAdminState is enabled.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.3.1.10INTEGER {enabled(1), disabled(2)}read-writecurrent
swL3IpCtrlIpv6AdminState
OBJECT-TYPE
The IPv6 admin state of the IP interface. The default state is determined by project. This state will only be effective when the swL3IpCtrlAdminState is enabled.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.3.1.12INTEGER {enabled(1), disabled(2)}read-writecurrent
swL3IpCtrlIpv6LinkLocalAddress
OBJECT-TYPE
The IPv6 link local address for this interface.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.3.1.14Ipv6Addressread-onlycurrent
swL3IpCtrlIpv6LinkLocalPrefixLen
OBJECT-TYPE
The IPv6 prefix length for this IPv6 link local address.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.3.1.15INTEGERread-onlycurrent
swL3IpCtrlState
OBJECT-TYPE
This variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.3.1.16RowStatusread-createcurrent
swL3IpCtrlIpv6LinkLocalAutoState
OBJECT-TYPE
The state of the IPv6 link local auto.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.3.1.17INTEGER {other(1), enabled(2), disabled(3)}read-writecurrent
swL3IpCtrlLocalProxyArp
OBJECT-TYPE
This object indicates enable/disable of the local proxy ARP function for IPv4.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.3.1.18INTEGER {enabled(1), disabled(2)}read-writecurrent
swL3IpCtrlDhcpv6ClientState
OBJECT-TYPE
The state of the Dhcpv6 Client.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.3.1.20INTEGER {enabled(1), disabled(2)}read-writecurrent
swL3IpCtrlIpDirectedBroadcastState
OBJECT-TYPE
The state of the IP Directed Broadcast.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.3.1.21INTEGER {enabled(1), disabled(2)}read-writecurrent
swL3IpCtrlIpDhcpOption12State
OBJECT-TYPE
Enable or disable insertion of option 12 in the DHCPDISCOVER and DHCPREQUEST message.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.3.1.22INTEGER {enabled(1), disabled(2)}read-writecurrent
swL3IpCtrlIpDhcpOption12HostName
OBJECT-TYPE
Specify the host name to be inserted in the DHCPDISCOVER and DHCPREQUEST message. The specified host name must start with a letter, end with a letter or digit, and have only letters, digits, and hyphen as interior characters; the maximal length is 63. By default, the host name is empty. When set an empty host name, means to clear the host name setting and use the default value to encode option 12.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.3.1.23DisplayString (SIZE(0..63))read-writecurrent
swL3Ipv6CtrlTable
OBJECT-TYPE
This table contains IPv6 information of an IP interface.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.4not-accessiblecurrent
swL3Ipv6CtrlEntry
OBJECT-TYPE
A list of IPv6 information about a specific IP interface.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.4.1not-accessiblecurrent
swL3Ipv6CtrlInterfaceName
OBJECT-TYPE
This object indicates the name of the IP interface.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.4.1.1DisplayString (SIZE(1..12))read-onlycurrent
swL3Ipv6CtrlMaxReassmblySize
OBJECT-TYPE
Maximum Reassembly Size of the IP interface.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.4.1.2INTEGERread-onlycurrent
swL3Ipv6CtrlNsRetransTimer
OBJECT-TYPE
Neighbor solicitation's retransmit timer. The unit is set in milliseconds.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.4.1.3Unsigned32 (0..4294967295)read-writecurrent
swL3Ipv6CtrlRaState
OBJECT-TYPE
Neighbor solicited state.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.4.1.5INTEGER {enabled(1), disabled(2)}read-writecurrent
swL3Ipv6CtrlRaMinRtrAdvInterval
OBJECT-TYPE
The minimum time allowed between sending unsolicited multicast Router Advertisements from the interface. The unit is set in seconds. It must be no less than 3 seconds and no greater than .75 * MaxRtrAdvInterval. Default value: 0.33 * MaxRtrAdvInterval
1.3.6.1.4.1.171.11.117.2.1.3.2.1.4.1.6INTEGER (3..1350)read-writecurrent
swL3Ipv6CtrlRaMaxRtrAdvInterval
OBJECT-TYPE
The maximum time allowed between sending unsolicited multicast Router Advertisements from the interface. The unit is set in seconds.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.4.1.7INTEGER (4..1800)read-writecurrent
swL3Ipv6CtrlRaLifeTime
OBJECT-TYPE
Indicates the lifetime of the router as the default router.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.4.1.8INTEGER (0..9000)read-writecurrent
swL3Ipv6CtrlRaReachableTime
OBJECT-TYPE
Indicates the amount of time that a node can consider a neighboring node reachable after receiving a reachability confirmation.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.4.1.9INTEGER (0..3600000)read-writecurrent
swL3Ipv6CtrlRaRetransTime
OBJECT-TYPE
Indicates the amount of time between retransmissions of neighbor solicited messages. The unit is set in millisecond.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.4.1.10Unsigned32 (0..4294967295)read-writecurrent
swL3Ipv6CtrlRaHopLimit
OBJECT-TYPE
Indicates the default value of the hop limit field in the IPv6 header for packets sent by hosts that receive this RA message.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.4.1.11INTEGER (0..255)read-writecurrent
swL3Ipv6CtrlRaManagedFlag
OBJECT-TYPE
When enabled, it indicates that hosts receiving this RA must use a stateful address configuration protocol to obtain an address in the addition to the addresses derived from the stateless address configuration.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.4.1.12INTEGER {enabled(1), disabled(2)}read-writecurrent
swL3Ipv6CtrlRaOtherConfigFlag
OBJECT-TYPE
When enabled, it indicates that hosts receiving this RA must use a stateful address configuration protocol to obtain an on-link address configuration information.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.4.1.13INTEGER {enabled(1), disabled(2)}read-writecurrent
swL3Ipv6AddressCtrlTable
OBJECT-TYPE
This table contain IPv6 address information for each IP interface.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.5not-accessiblecurrent
swL3Ipv6AddressCtrlEntry
OBJECT-TYPE
A list of information about a specific IPv6 address.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.5.1not-accessiblecurrent
swL3Ipv6AddressCtrlInterfaceName
OBJECT-TYPE
This object indicates the name of the IP interface.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.5.1.1DisplayString (SIZE(1..12))read-onlycurrent
swL3Ipv6Address
OBJECT-TYPE
Specify the IPv6 address.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.5.1.2Ipv6Addressread-onlycurrent
swL3Ipv6AddressCtrlPrefixLen
OBJECT-TYPE
Indicates the prefix length of this IPv6 address.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.5.1.3INTEGERread-onlycurrent
swL3Ipv6AddressCtrlPreferredLifeTime
OBJECT-TYPE
Indicates the number of seconds that an address, based on the specified prefix, using the stateless address configuration, remains in preferred state. For an infinite valid lifetime, the value can be set to 0xffffffff.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.5.1.4Unsigned32 (0..4294967294)read-writecurrent
swL3Ipv6AddressCtrlValidLifeTime
OBJECT-TYPE
Indicates the number of seconds that an address, based on the specified prefix, using the stateless address configuration, remains valid. For an infinite valid lifetime, the value can be set to 0xffffffff.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.5.1.5Unsigned32 (0..4294967294)read-writecurrent
swL3Ipv6AddressCtrlOnLinkFlag
OBJECT-TYPE
When enabled, the address implied by the specified prefix is available on the link where the RA message is received.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.5.1.6INTEGER {enabled(1), disabled(2)}read-writecurrent
swL3Ipv6AddressCtrlAutonomousFlag
OBJECT-TYPE
When enabled, the specified prefix will be used to create an autonomous address configuration.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.5.1.7INTEGER {enabled(1), disabled(2)}read-writecurrent
swL3Ipv6AddressCtrlState
OBJECT-TYPE
This variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.5.1.8RowStatusread-createcurrent
swL3Ipv6AddressCtrlAddressType
OBJECT-TYPE
This object indicates the type of the IPv6 address. manual(1): the IPv6 address is configured by user. dhcpv6(2): the IPv6 address is assigned by DHCPv6 server. stateless(3): the IPv6 address is assigned by router advertisement.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.5.1.9INTEGER {manual(1), dhcpv6(2), stateless(3)}read-onlycurrent
swL3IpCtrlAllIpIfState
OBJECT-TYPE
This object indicates all interface function state of the device.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.7INTEGER {other(1), enabled(2), disabled(3)}read-writecurrent
swL3LoopBackIpCtrlTable
OBJECT-TYPE
This table contains loopback IP interface information.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.8not-accessiblecurrent
swL3LoopBackIpCtrlEntry
OBJECT-TYPE
A list of information about a specific loopback IP interface.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.8.1not-accessiblecurrent
swL3LoopBackIpCtrlInterfaceName
OBJECT-TYPE
This object indicates the name of the loopback IP interface.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.8.1.1DisplayString (SIZE(1..12))read-onlycurrent
swL3LoopBackIpCtrlIfIndex
OBJECT-TYPE
This object uniquely identifies the loopback IP interface number in the swL3LoopBackIpCtrlTable.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.8.1.2INTEGER (0..65535)read-onlycurrent
swL3LoopBackIpCtrlIpAddr
OBJECT-TYPE
The IP address of the loopback interface. This object only can take the value of the unicast IP address.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.8.1.3IpAddressread-createcurrent
swL3LoopBackIpCtrlIpSubnetMask
OBJECT-TYPE
The IP net mask for this loopback interface.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.8.1.4IpAddressread-createcurrent
swL3LoopBackIpCtrlAdminState
OBJECT-TYPE
The state of the loopback IP interface.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.8.1.5INTEGER {enabled(1), disabled(2)}read-createcurrent
swL3LoopBackIpCtrlRowStatus
OBJECT-TYPE
This variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table.
1.3.6.1.4.1.171.11.117.2.1.3.2.1.8.1.6RowStatusread-createcurrent
swL3IpFdbMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.2.1.3.2.2
swL3IpFdbInfoTable
OBJECT-TYPE
A table that contains forwarding and/or filtering information. This information is used by the switch in determining how to propagate the received IP packets.
1.3.6.1.4.1.171.11.117.2.1.3.2.2.1not-accessiblecurrent
swL3IpFdbInfoEntry
OBJECT-TYPE
Information about a specific IP address for which the bridge has some forwarding and/or filtering information.
1.3.6.1.4.1.171.11.117.2.1.3.2.2.1.1not-accessiblecurrent
swL3IpFdbInfoIpAddr
OBJECT-TYPE
A IP address for which switch has forwarding and/or filtering information.
1.3.6.1.4.1.171.11.117.2.1.3.2.2.1.1.1IpAddressread-onlycurrent
swL3IpFdbInfoIpSubnetMask
OBJECT-TYPE
A IP net mask for this interface for which the switch has forwarding and/or filtering information.
1.3.6.1.4.1.171.11.117.2.1.3.2.2.1.1.2IpAddressread-onlycurrent
swL3IpFdbInfoPort
OBJECT-TYPE
Either the value '0', or the port number of the port on which packets having an IP address equal to the value of the corresponding instance of swL3IpFdbInfoIpAddr has been seen. A value of '0' indicates that the port number has not been learned but that switch does have some forwarding/filtering information about this address.
1.3.6.1.4.1.171.11.117.2.1.3.2.2.1.1.3INTEGER (0..65535)read-onlycurrent
swL3IpFdbInfoType
OBJECT-TYPE
The status of this entry.
1.3.6.1.4.1.171.11.117.2.1.3.2.2.1.1.4INTEGER {other(1), static(2), dynamic(3)}read-onlycurrent
swL3IpArpAgingTime
OBJECT-TYPE
The timeout period in minutes for aging out dynamically learned arp information.
1.3.6.1.4.1.171.11.117.2.1.3.2.4INTEGER (0..65535)read-writecurrent
swL3IpStaticRouteTable
OBJECT-TYPE
This entity's IP static Routing table.
1.3.6.1.4.1.171.11.117.2.1.3.2.5not-accessiblecurrent
swL3IpStaticRouteEntry
OBJECT-TYPE
A particular route to a particular destination, under a particular policy. Once an entry be built,it shouldn't be modified.That is,it just support create and delete action.
1.3.6.1.4.1.171.11.117.2.1.3.2.5.1not-accessiblecurrent
swL3IpStaticRouteDest
OBJECT-TYPE
The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the swL3IpStaticRouteMask object is not equal to x.
1.3.6.1.4.1.171.11.117.2.1.3.2.5.1.1IpAddressread-onlycurrent
swL3IpStaticRouteMask
OBJECT-TYPE
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the swL3IpStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the swL3IpStaticRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the swL3IpStaticRouteDest object is not equal to swL3IpStaticRouteDest.
1.3.6.1.4.1.171.11.117.2.1.3.2.5.1.2IpAddressread-onlycurrent
swL3IpStaticRouteBkupState
OBJECT-TYPE
The routing state for this route.The value SHOULD be primary(1) or backup(2).
1.3.6.1.4.1.171.11.117.2.1.3.2.5.1.3INTEGER {primary(1), backup(2), none(3)}read-createcurrent
swL3IpStaticRouteNextHop
OBJECT-TYPE
On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0.
1.3.6.1.4.1.171.11.117.2.1.3.2.5.1.4IpAddressread-onlycurrent
swL3IpStaticRouteMetric
OBJECT-TYPE
The routing metric for this route.
1.3.6.1.4.1.171.11.117.2.1.3.2.5.1.5INTEGER (1..65535)read-createcurrent
swL3IpStaticRouteStatus
OBJECT-TYPE
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry is reside in the table. active(4) - the nextHop of this entry exists in the ARP table. inActive(5) - the next hop of this entry does not exist in the ARP table.
1.3.6.1.4.1.171.11.117.2.1.3.2.5.1.6INTEGER {other(1), invalid(2), valid(3), active(4), inActive(5)}read-createcurrent
swL3IpStaticRouteWeight
OBJECT-TYPE
Specifies the weight value. Used for the weighted multipath.
1.3.6.1.4.1.171.11.117.2.1.3.2.5.1.7INTEGER (0..4)read-createcurrent
swL3IpStaticRouteInterfaceName
OBJECT-TYPE
Specifies the name of the IP interface.
1.3.6.1.4.1.171.11.117.2.1.3.2.5.1.8DisplayStringread-onlycurrent
swL3IpMcastMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.2.1.3.2.6
swL3IpMcastStaticRouteTable
OBJECT-TYPE
IP multicast static routing allows you to have multicast paths diverge from the unicast paths.
1.3.6.1.4.1.171.11.117.2.1.3.2.6.1not-accessiblecurrent
swL3IpMcastStaticRouteEntry
OBJECT-TYPE
A list of information about IP multicast static routes.
1.3.6.1.4.1.171.11.117.2.1.3.2.6.1.1not-accessiblecurrent
swL3IpMcastStaticRouteIpmrouteAddr
OBJECT-TYPE
If the source IP address of the received IP multicast packet matches this Ipmrouteaddress, the RPF network is used to do an RPF check.
1.3.6.1.4.1.171.11.117.2.1.3.2.6.1.1.1IpAddressnot-accessiblecurrent
swL3IpMcastStaticRouteIpmrouteMask
OBJECT-TYPE
This specifies an IP net Mask for this interface.
1.3.6.1.4.1.171.11.117.2.1.3.2.6.1.1.2IpAddressnot-accessiblecurrent
swL3IpMcastStaticRouteRpfAddr
OBJECT-TYPE
If the source IP address of the received IP multicast packet matches the Ipmrouteaddress, the Rpfaddress will be used to check whether the packet received is from a legal interface. If it is set to null, it means that if the source IP address in the received IP multicast packet matches the Ipmrouteaddress, the RPF check will fail.
1.3.6.1.4.1.171.11.117.2.1.3.2.6.1.1.3IpAddressread-createcurrent
swL3IpMcastStaticRouteRowStatus
OBJECT-TYPE
This object indicates the status of this entry.
1.3.6.1.4.1.171.11.117.2.1.3.2.6.1.1.4RowStatusread-createcurrent
swL3IpStaticRouteTunnelTable
OBJECT-TYPE
This entity's IPv4 static Routing tunnel table.
1.3.6.1.4.1.171.11.117.2.1.3.2.7not-accessiblecurrent
swL3IpStaticRouteTunnelEntry
OBJECT-TYPE
A particular route to a particular destination, under a particular policy. Once an entry is built, it cannot be modified. That is, it just supports create and delete actions.
1.3.6.1.4.1.171.11.117.2.1.3.2.7.1not-accessiblecurrent
swL3IpStaticRouteTunnelInterfaceName
OBJECT-TYPE
This object indicates the name of the IP tunnel interface.
1.3.6.1.4.1.171.11.117.2.1.3.2.7.1.1DisplayString (SIZE(0..12))read-onlycurrent
swL3IpStaticRouteTunnelRowStatus
OBJECT-TYPE
This object indicates the status of this entry.
1.3.6.1.4.1.171.11.117.2.1.3.2.7.1.2RowStatusread-createcurrent
swL3Md5Table
OBJECT-TYPE
This table displays the current MD5 key table.
1.3.6.1.4.1.171.11.117.2.1.3.4not-accessiblecurrent
swL3Md5Entry
OBJECT-TYPE
A list of information displays the current MD5 key table.
1.3.6.1.4.1.171.11.117.2.1.3.4.1not-accessiblecurrent
swL3Md5KeyId
OBJECT-TYPE
The MD5 key ID.
1.3.6.1.4.1.171.11.117.2.1.3.4.1.1INTEGER (1..255)read-onlycurrent
swL3Md5Key
OBJECT-TYPE
An MD5 password of up to 16 bytes.
1.3.6.1.4.1.171.11.117.2.1.3.4.1.2DisplayString (SIZE(1..16))read-createcurrent
swL3Md5RowStatus
OBJECT-TYPE
This object indicates the status of this entry.
1.3.6.1.4.1.171.11.117.2.1.3.4.1.3RowStatusread-createcurrent
swL3RouteRedistriTable
OBJECT-TYPE
Route redistribution allows routers on the network that are running different routing protocols to exchange routing information. This is accomplished by comparing the routes stored in the varios routers' routing tables and assigning appropriate metrics. This information is then exchanged among the various routers according to the individual routers current routing protocol.
1.3.6.1.4.1.171.11.117.2.1.3.5not-accessiblecurrent
swL3RouteRedistriEntry
OBJECT-TYPE
A list of information displaying the route redistribution table.
1.3.6.1.4.1.171.11.117.2.1.3.5.1not-accessiblecurrent
swL3RouteRedistriSrcProtocol
OBJECT-TYPE
Allows the selection of the protocol of the source device.
1.3.6.1.4.1.171.11.117.2.1.3.5.1.1INTEGER {other(1), rip(2), ospf(3), static(4), local(5)}read-onlycurrent
swL3RouteRedistriDstProtocol
OBJECT-TYPE
Allows the selection of the protocol of the destination device.
1.3.6.1.4.1.171.11.117.2.1.3.5.1.2INTEGER {other(1), rip(2), ospf(3)}read-onlycurrent
swL3RouteRedistriType
OBJECT-TYPE
Allows the selection of one of the methods for calculating the metric value.
1.3.6.1.4.1.171.11.117.2.1.3.5.1.3INTEGER {other(1), all(2), type-1(3), type-2(4), internal(5), external(6), inter-E1(7), inter-E2(8), extType1(9), extType2(10)}read-createcurrent
swL3RouteRedistriMetric
OBJECT-TYPE
Allows the entry of an OSPF interface cost. This is analogous to a Hop Count in the RIP routing protocol. The value '0' indicates default value.
1.3.6.1.4.1.171.11.117.2.1.3.5.1.4Unsigned32read-createcurrent
swL3RouteRedistriRowStatus
OBJECT-TYPE
This object indicates the status of this entry.
1.3.6.1.4.1.171.11.117.2.1.3.5.1.5RowStatusread-createcurrent
swL3RouteRedistriRouteMapName
OBJECT-TYPE
Use route map to change attributes of imported route.
1.3.6.1.4.1.171.11.117.2.1.3.5.1.6DisplayString (SIZE(0..16))read-createcurrent
swL3OspfHostTable
OBJECT-TYPE
The list of Hosts, and their metrics, that the router will advertise as host routes.
1.3.6.1.4.1.171.11.117.2.1.3.6not-accessiblecurrent
swL3OspfHostEntry
OBJECT-TYPE
A metric to be advertised, for a given type of service, when a given host is reachable.
1.3.6.1.4.1.171.11.117.2.1.3.6.1not-accessiblecurrent
swL3OspfHostIpAddress
OBJECT-TYPE
The IP Address of the Host.
1.3.6.1.4.1.171.11.117.2.1.3.6.1.1IpAddressread-onlycurrent
swL3OspfHostTOS
OBJECT-TYPE
The Type of Service of the route being configured.
1.3.6.1.4.1.171.11.117.2.1.3.6.1.2TOSTyperead-onlycurrent
swL3OspfHostMetric
OBJECT-TYPE
The Metric to be advertised.
1.3.6.1.4.1.171.11.117.2.1.3.6.1.3Metricread-createcurrent
swL3OspfHostAreaID
OBJECT-TYPE
The Area the Host Entry is to be found within. By default, the area that a subsuming OSPF interface is in, or 0.0.0.0
1.3.6.1.4.1.171.11.117.2.1.3.6.1.4AreaIDread-createcurrent
swL3OspfHostStatus
OBJECT-TYPE
This variable displays the status of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
1.3.6.1.4.1.171.11.117.2.1.3.6.1.5RowStatusread-createcurrent
swL3ospfVirtIfTable
OBJECT-TYPE
Information about this router's virtual inter- faces.
1.3.6.1.4.1.171.11.117.2.1.3.7not-accessiblecurrent
swL3ospfVirtIfEntry
OBJECT-TYPE
Information about a single Virtual Interface.
1.3.6.1.4.1.171.11.117.2.1.3.7.1not-accessiblecurrent
swL3ospfVirtIfAreaId
OBJECT-TYPE
The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0
1.3.6.1.4.1.171.11.117.2.1.3.7.1.1AreaIDread-onlycurrent
swL3ospfVirtIfNeighbor
OBJECT-TYPE
The Router ID of the Virtual Neighbor.
1.3.6.1.4.1.171.11.117.2.1.3.7.1.2RouterIDread-onlycurrent
swL3ospfVirtIfTransitDelay
OBJECT-TYPE
The estimated number of seconds it takes to transmit a link- state update packet over this interface.
1.3.6.1.4.1.171.11.117.2.1.3.7.1.3UpToMaxAgeread-onlycurrent
swL3ospfVirtIfRetransInterval
OBJECT-TYPE
The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets. This value should be well over the expected round- trip time.
1.3.6.1.4.1.171.11.117.2.1.3.7.1.4UpToMaxAgeread-onlycurrent
swL3ospfVirtIfHelloInterval
OBJECT-TYPE
The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor.
1.3.6.1.4.1.171.11.117.2.1.3.7.1.5HelloRangeread-createcurrent
swL3ospfVirtIfRtrDeadInterval
OBJECT-TYPE
The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neigh- bor.
1.3.6.1.4.1.171.11.117.2.1.3.7.1.6Integer32 (1..65535)read-createcurrent
swL3ospfVirtIfState
OBJECT-TYPE
OSPF virtual interface states.
1.3.6.1.4.1.171.11.117.2.1.3.7.1.7INTEGER {down(1), pointToPoint(4)}read-onlycurrent
swL3ospfVirtIfEvents
OBJECT-TYPE
The number of state changes or error events on this Virtual Link
1.3.6.1.4.1.171.11.117.2.1.3.7.1.8Counter32read-onlycurrent
swL3ospfVirtIfAuthType
OBJECT-TYPE
The authentication type specified for a virtu- al interface. Additional authentication types may be assigned locally.
1.3.6.1.4.1.171.11.117.2.1.3.7.1.9INTEGER (0..255)read-createcurrent
swL3ospfVirtIfAuthKey
OBJECT-TYPE
If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 oc- tets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication cannot use a key of more than 8 oc- tets. Larger keys are useful only with authen- tication mechanisms not specified in this docu- ment.
1.3.6.1.4.1.171.11.117.2.1.3.7.1.10OCTET STRING (SIZE(0..256))read-createcurrent
swL3ospfVirtIfAuthKeyID
OBJECT-TYPE
The MD5 key ID.
1.3.6.1.4.1.171.11.117.2.1.3.7.1.11INTEGER (0..255)read-createcurrent
swL3ospfVirtIfStatus
OBJECT-TYPE
This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
1.3.6.1.4.1.171.11.117.2.1.3.7.1.12RowStatusread-createcurrent
swL3ospfIfTable
OBJECT-TYPE
The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF.
1.3.6.1.4.1.171.11.117.2.1.3.8not-accessiblecurrent
swL3ospfIfEntry
OBJECT-TYPE
The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF.
1.3.6.1.4.1.171.11.117.2.1.3.8.1not-accessiblecurrent
swL3ospfIfIpAddress
OBJECT-TYPE
The IP address of this OSPF interface.
1.3.6.1.4.1.171.11.117.2.1.3.8.1.1IpAddressread-onlycurrent
swL3ospfAddressLessIf
OBJECT-TYPE
For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address.
1.3.6.1.4.1.171.11.117.2.1.3.8.1.2Integer32read-onlycurrent
swL3ospfIfAreaId
OBJECT-TYPE
A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.
1.3.6.1.4.1.171.11.117.2.1.3.8.1.3AreaIDread-writecurrent
swL3ospfIfType
OBJECT-TYPE
The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broad- cast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25 and similar technologies take the value 'nbma', and links that are definitively point to point take the value 'pointToPoint'.
1.3.6.1.4.1.171.11.117.2.1.3.8.1.4INTEGER {broadcast(1), nbma(2), pointToPoint(3), pointToMultipoint(5)}read-onlycurrent
swL3ospfIfAdminStat
OBJECT-TYPE
The OSPF interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPF.
1.3.6.1.4.1.171.11.117.2.1.3.8.1.5Statusread-writecurrent
swL3ospfIfRtrPriority
OBJECT-TYPE
The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligi- ble to become the designated router on this particular network. In the event of a tie in this value, routers will use their Router ID as a tie breaker.
1.3.6.1.4.1.171.11.117.2.1.3.8.1.6DesignatedRouterPriorityread-writecurrent
swL3ospfIfTransitDelay
OBJECT-TYPE
The estimated number of seconds it takes to transmit a link state update packet over this interface.
1.3.6.1.4.1.171.11.117.2.1.3.8.1.7UpToMaxAgeread-onlycurrent
swL3ospfIfRetransInterval
OBJECT-TYPE
The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets.
1.3.6.1.4.1.171.11.117.2.1.3.8.1.8UpToMaxAgeread-onlycurrent
swL3ospfIfHelloInterval
OBJECT-TYPE
The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common network.
1.3.6.1.4.1.171.11.117.2.1.3.8.1.9HelloRangeread-writecurrent
swL3ospfIfRtrDeadInterval
OBJECT-TYPE
The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.
1.3.6.1.4.1.171.11.117.2.1.3.8.1.10PositiveIntegerread-writecurrent
swL3ospfIfPollInterval
OBJECT-TYPE
The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor.
1.3.6.1.4.1.171.11.117.2.1.3.8.1.11PositiveIntegerread-onlycurrent
swL3ospfIfState
OBJECT-TYPE
The OSPF Interface State.
1.3.6.1.4.1.171.11.117.2.1.3.8.1.12INTEGER {down(1), loopback(2), waiting(3), pointToPoint(4), designatedRouter(5), backupDesignatedRouter(6), otherDesignatedRouter(7)}read-onlycurrent
swL3ospfIfDesignatedRouter
OBJECT-TYPE
The IP Address of the Designated Router.
1.3.6.1.4.1.171.11.117.2.1.3.8.1.13IpAddressread-onlycurrent
swL3ospfIfBackupDesignatedRouter
OBJECT-TYPE
The IP Address of the Backup Designated Router.
1.3.6.1.4.1.171.11.117.2.1.3.8.1.14IpAddressread-onlycurrent
swL3ospfIfEvents
OBJECT-TYPE
The number of times this OSPF interface has changed its state, or an error has occurred.
1.3.6.1.4.1.171.11.117.2.1.3.8.1.15Counter32read-onlycurrent
swL3ospfIfMulticastForwarding
OBJECT-TYPE
The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multicasting is not meaning- ful on point to point and NBMA interfaces, and setting ospfMulticastForwarding to 0 effective- ly disables all multicast forwarding.
1.3.6.1.4.1.171.11.117.2.1.3.8.1.16INTEGER {blocked(1), multicast(2), unicast(3)}read-onlycurrent
swL3ospfIfDemand
OBJECT-TYPE
Indicates whether Demand OSPF procedures (hel- lo supression to FULL neighbors and setting the DoNotAge flag on proogated LSAs) should be per- formed on this interface.
1.3.6.1.4.1.171.11.117.2.1.3.8.1.17TruthValueread-onlycurrent
swL3ospfIfAuthType
OBJECT-TYPE
The authentication type specified for an in- terface. Additional authentication types may be assigned locally.
1.3.6.1.4.1.171.11.117.2.1.3.8.1.18INTEGER (0..255)read-writecurrent
swL3ospfIfAuthKey
OBJECT-TYPE
The Authentication Key. If the Area's Author- ization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication cannot use a key of more than 8 oc- tets. Larger keys are useful only with authen- tication mechanisms not specified in this docu- ment. When read, ospfIfAuthKey always returns an Oc- tet String of length zero.
1.3.6.1.4.1.171.11.117.2.1.3.8.1.19OCTET STRING (SIZE(0..256))read-writecurrent
swL3ospfIfAuthKeyID
OBJECT-TYPE
The MD5 key ID.
1.3.6.1.4.1.171.11.117.2.1.3.8.1.20INTEGER (0..255)read-writecurrent
swL3ospfIfPassiveMode
OBJECT-TYPE
Assign the designated entry to be a passive interface.
1.3.6.1.4.1.171.11.117.2.1.3.8.1.21INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL3ospfIfMetric
OBJECT-TYPE
The Metric to be advertised.
1.3.6.1.4.1.171.11.117.2.1.3.8.1.23Metricread-writecurrent
swL3ospfIfDistributeListInType
OBJECT-TYPE
The type of route filter for distribute list in.
1.3.6.1.4.1.171.11.117.2.1.3.8.1.24INTEGER {none(1), access_list(2)}read-writecurrent
swL3ospfIfDistributeListInName
OBJECT-TYPE
The name of route filter for distribute list in.
1.3.6.1.4.1.171.11.117.2.1.3.8.1.25DisplayString (SIZE(0..16))read-writecurrent
swL3RoutePreference
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.2.1.3.9
swL3RoutePreferenceRIP
OBJECT-TYPE
Used to configure the route preference of RIP.
1.3.6.1.4.1.171.11.117.2.1.3.9.1INTEGER (1..999)read-writecurrent
swL3RoutePreferenceOSPFIntra
OBJECT-TYPE
Used to configure the route preference of OSPF Intra.
1.3.6.1.4.1.171.11.117.2.1.3.9.2INTEGER (1..999)read-writecurrent
swL3RoutePreferenceStatic
OBJECT-TYPE
Used to configure the route preference of Static.
1.3.6.1.4.1.171.11.117.2.1.3.9.3INTEGER (1..999)read-writecurrent
swL3RoutePreferenceLocal
OBJECT-TYPE
Used to read the route preference of Local.
1.3.6.1.4.1.171.11.117.2.1.3.9.4INTEGER (0..999)read-onlycurrent
swL3RoutePreferenceOSPFInter
OBJECT-TYPE
Used to configure the route preference of OSPF Inter.
1.3.6.1.4.1.171.11.117.2.1.3.9.5INTEGER (1..999)read-writecurrent
swL3RoutePreferenceOSPFExtT1
OBJECT-TYPE
Used to configure the route preference of OSPFExtT1.
1.3.6.1.4.1.171.11.117.2.1.3.9.6INTEGER (1..999)read-writecurrent
swL3RoutePreferenceOSPFExtT2
OBJECT-TYPE
Used to configure the route preference of OSPF ExtT2.
1.3.6.1.4.1.171.11.117.2.1.3.9.7INTEGER (1..999)read-writecurrent
swL3RoutePreferenceDefault
OBJECT-TYPE
Used to configure the route preference of Default route.
1.3.6.1.4.1.171.11.117.2.1.3.9.8INTEGER (1..999)read-writecurrent
swL3ospfAreaTable
OBJECT-TYPE
Information describing the configured parame- ters and cumulative statistics of the router's attached areas.
1.3.6.1.4.1.171.11.117.2.1.3.10not-accessiblecurrent
swL3ospfAreaEntry
OBJECT-TYPE
Information describing the configured parame- ters and cumulative statistics of one of the router's attached areas.
1.3.6.1.4.1.171.11.117.2.1.3.10.1not-accessiblecurrent
swL3ospfAreaId
OBJECT-TYPE
A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.
1.3.6.1.4.1.171.11.117.2.1.3.10.1.1AreaIDread-onlycurrent
swL3ospfAreaType
OBJECT-TYPE
The type specified for an area.
1.3.6.1.4.1.171.11.117.2.1.3.10.1.2INTEGER {normal(1), stub(2), nssa(3)}read-createobsolete
swL3ospfAreaSummaryState
OBJECT-TYPE
Whether the summary LSA is effective for this area.
1.3.6.1.4.1.171.11.117.2.1.3.10.1.3INTEGER {none(1), disabled(2), enabled(3)}read-createcurrent
swL3ospfAreaMetric
OBJECT-TYPE
Enter the metric (1 - 65535; 0 for auto cost) of this area.
1.3.6.1.4.1.171.11.117.2.1.3.10.1.4Integer32 (0..65535)read-writecurrent
swL3ospfAreaTranslateState
OBJECT-TYPE
.
1.3.6.1.4.1.171.11.117.2.1.3.10.1.5INTEGER {none(1), disabled(2), enabled(3)}read-createcurrent
swL3ospfAreaStatus
OBJECT-TYPE
This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
1.3.6.1.4.1.171.11.117.2.1.3.10.1.6RowStatusread-createcurrent
swL3dvmrpInterfaceTable
OBJECT-TYPE
The (conceptual) table listing the router's multicast- capable interfaces.
1.3.6.1.4.1.171.11.117.2.1.3.12not-accessiblecurrent
swL3dvmrpInterfaceEntry
OBJECT-TYPE
An entry (conceptual row) in the dvmrpInterfaceTable. This row augments ipMRouteInterfaceEntry in the IP Multicast MIB, where the threshold object resides.
1.3.6.1.4.1.171.11.117.2.1.3.12.1not-accessiblecurrent
swL3dvmrpInterfaceIfIndex
OBJECT-TYPE
The ifIndex value of the interface for which DVMRP is enabled.
1.3.6.1.4.1.171.11.117.2.1.3.12.1.1Integer32not-accessiblecurrent
swL3dvmrpInterfaceLocalAddress
OBJECT-TYPE
The IP address this system will use as a source address on this interface. On unnumbered interfaces, it must be the same value as dvmrpInterfaceLocalAddress for some interface on the system.
1.3.6.1.4.1.171.11.117.2.1.3.12.1.2IpAddressread-createcurrent
swL3dvmrpInterfaceMetric
OBJECT-TYPE
The distance metric for this interface which is used to calculate distance vectors.
1.3.6.1.4.1.171.11.117.2.1.3.12.1.3Integer32 (1..31)read-createcurrent
swL3dvmrpInterfaceProbe
OBJECT-TYPE
Probe distribution interval.
1.3.6.1.4.1.171.11.117.2.1.3.12.1.4Integer32 (1..65535)read-createcurrent
swL3dvmrpInterfaceNbrTimeout
OBJECT-TYPE
Used to set the timer before neighbors are timed out.
1.3.6.1.4.1.171.11.117.2.1.3.12.1.5Integer32 (1..65535)read-createcurrent
swL3dvmrpInterfaceStatus
OBJECT-TYPE
The status of this entry. Creating the entry enables DVMRP on the virtual interface; destroying the entry or setting it to notInService disables DVMRP on the virtual interface.
1.3.6.1.4.1.171.11.117.2.1.3.12.1.6RowStatusread-createcurrent
swL3dvmrpInterfaceRcvBadPkts
OBJECT-TYPE
The number of DVMRP packets received on the interface by the DVMRP process which were subsequently discarded as invalid (e.g. invalid packet format, or a route report from an unknown neighbor).
1.3.6.1.4.1.171.11.117.2.1.3.12.1.7Counter32read-onlycurrent
swL3dvmrpInterfaceRcvBadRoutes
OBJECT-TYPE
The number of routes, in valid DVMRP packets, which were ignored because the entry was invalid.
1.3.6.1.4.1.171.11.117.2.1.3.12.1.8Counter32read-onlycurrent
swL3OspfLsdbMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.2.1.3.13
swL3OspfInternalLsdbTable
OBJECT-TYPE
The OSPF Process's Link State Database.
1.3.6.1.4.1.171.11.117.2.1.3.13.1not-accessiblecurrent
swL3OspfInternalLsdbEntry
OBJECT-TYPE
A single Link State Advertisement.
1.3.6.1.4.1.171.11.117.2.1.3.13.1.1not-accessiblecurrent
swL3OspfInternalLsdbAreaId
OBJECT-TYPE
The 32 bit identifier of the Area from which the LSA was received.
1.3.6.1.4.1.171.11.117.2.1.3.13.1.1.1AreaIDread-onlycurrent
swL3OspfInternalLsdbType
OBJECT-TYPE
The type of the link state advertisement. Each link state type has a separate advertise- ment format.
1.3.6.1.4.1.171.11.117.2.1.3.13.1.1.2INTEGER {routerLink(1), networkLink(2), summaryLink(3), asSummaryLink(4), asExternalLink(5), multicastLink(6), nssaExternalLink(7)}read-onlycurrent
swL3OspfInternalLsdbLsid
OBJECT-TYPE
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
1.3.6.1.4.1.171.11.117.2.1.3.13.1.1.3IpAddressread-onlycurrent
swL3OspfInternalLsdbRouterId
OBJECT-TYPE
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
1.3.6.1.4.1.171.11.117.2.1.3.13.1.1.4RouterIDread-onlycurrent
swL3OspfInternalLsdbMetric
OBJECT-TYPE
Enter the metric (1 - 65535; 0 for auto cost) of this area.
1.3.6.1.4.1.171.11.117.2.1.3.13.1.1.5Integer32 (0..65535)read-onlycurrent
swL3OspfInternalLsdbSequenceNo
OBJECT-TYPE
The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
1.3.6.1.4.1.171.11.117.2.1.3.13.1.1.6OCTET STRING (SIZE(4))read-onlycurrent
swL3OspfInternalLsdbAge
OBJECT-TYPE
This field is the age of the link state adver- tisement in seconds.
1.3.6.1.4.1.171.11.117.2.1.3.13.1.1.7Unsigned32read-onlycurrent
swL3OspfInternalLsdbChecksum
OBJECT-TYPE
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.
1.3.6.1.4.1.171.11.117.2.1.3.13.1.1.8Integer32read-onlycurrent
swL3OspfExternalLsdbTable
OBJECT-TYPE
The OSPF Process's Links State Database.
1.3.6.1.4.1.171.11.117.2.1.3.13.2not-accessiblecurrent
swL3OspfExternalLsdbEntry
OBJECT-TYPE
A single Link State Advertisement.
1.3.6.1.4.1.171.11.117.2.1.3.13.2.1not-accessiblecurrent
swL3OspfExternalLsdbType
OBJECT-TYPE
The type of the link state advertisement. Each link state type has a separate advertise- ment format.
1.3.6.1.4.1.171.11.117.2.1.3.13.2.1.1INTEGER {asExternalLink(5), nssaExternalLink(7)}read-onlycurrent
swL3OspfExternalLsdbLsid
OBJECT-TYPE
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
1.3.6.1.4.1.171.11.117.2.1.3.13.2.1.2IpAddressread-onlycurrent
swL3OspfExternalLsdbRouterId
OBJECT-TYPE
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
1.3.6.1.4.1.171.11.117.2.1.3.13.2.1.3RouterIDread-onlycurrent
swL3OspfExternalLsdbMetric
OBJECT-TYPE
Enter the metric (1 - 65535; 0 for auto cost) of this area.
1.3.6.1.4.1.171.11.117.2.1.3.13.2.1.4Integer32 (0..65535)read-onlycurrent
swL3OspfExternalLsdbMetricType
OBJECT-TYPE
Enter the metric type of this area.
1.3.6.1.4.1.171.11.117.2.1.3.13.2.1.5INTEGER {unrecognized(0), type-1(1), type-2(2)}read-onlycurrent
swL3OspfExternalLsdbSequenceNo
OBJECT-TYPE
The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
1.3.6.1.4.1.171.11.117.2.1.3.13.2.1.6OCTET STRING (SIZE(4))read-onlycurrent
swL3OspfExternalLsdbAge
OBJECT-TYPE
This field is the age of the link state adver- tisement in seconds.
1.3.6.1.4.1.171.11.117.2.1.3.13.2.1.7Unsigned32read-onlycurrent
swL3OspfExternalLsdbChecksum
OBJECT-TYPE
This field is the checksum of the complete contents of the advertisement, except the age field. The age field is the exception so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.
1.3.6.1.4.1.171.11.117.2.1.3.13.2.1.8Integer32read-onlycurrent
swL3OspfExternalLsdbForwardingAddress
OBJECT-TYPE
This field is the forwarding address.
1.3.6.1.4.1.171.11.117.2.1.3.13.2.1.9IpAddressread-onlycurrent
swL3OspfExternalLsdbRouteTag
OBJECT-TYPE
This field is the route tag.
1.3.6.1.4.1.171.11.117.2.1.3.13.2.1.10OCTET STRINGread-onlycurrent
swL3VrrpOperMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.2.1.3.14
swL3VrrpOperTable
OBJECT-TYPE
Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of 'swL3vrrpOperEntry' items.
1.3.6.1.4.1.171.11.117.2.1.3.14.1not-accessiblecurrent
swL3VrrpOperEntry
OBJECT-TYPE
An entry in the vrrpOperTable containing the operational characteristics of a virtual router. On a VRRP router, a given virtual router is identified by a combination of the IF index and VRID. Rows in the table cannot be modified unless the value of `swL3VrrpOperAdminState' is `disabled' and the `swL3VrrpOperState' has transitioned to `initialize'.
1.3.6.1.4.1.171.11.117.2.1.3.14.1.1not-accessiblecurrent
swL3VrrpOperIfIndex
OBJECT-TYPE
The ifIndex value of the interface for which VRRP is enabled.
1.3.6.1.4.1.171.11.117.2.1.3.14.1.1.1Integer32read-onlycurrent
swL3VrrpOperVrId
OBJECT-TYPE
This object contains the Virtual Router Identifier (VRID).
1.3.6.1.4.1.171.11.117.2.1.3.14.1.1.2VrIdread-onlycurrent
swL3VrrpOperVirtualMacAddr
OBJECT-TYPE
The virtual MAC address of the virtual router. Although this object can be derived from the 'swL3VrrpOperVrId' object, it is defined so that it is easily obtainable by a management application and can be included in VRRP-related SNMP traps.
1.3.6.1.4.1.171.11.117.2.1.3.14.1.1.3MacAddressread-onlycurrent
swL3VrrpOperState
OBJECT-TYPE
The current state of the virtual router. This object has three defined values: - `initialize', which indicates that all the virtual router is waiting for a startup event. - `backup', which indicates the virtual router is monitoring the availability of the master router. - `master', which indicates that the virtual router is forwarding packets for IP addresses that are associated with this router. Setting the `swL3VrrpOperAdminState' object (below) initiates transitions in the value of this object.
1.3.6.1.4.1.171.11.117.2.1.3.14.1.1.4INTEGER {initialize(1), backup(2), master(3)}read-onlycurrent
swL3VrrpOperAdminState
OBJECT-TYPE
This object will enable/disable the virtual router function. Setting the value to `up', will transition the state of the virtual router from `initialize' to `backup' or `master', depending on the value of `swL3VrrpOperPriority'. Setting the value to `down', will transition the router from `master' or `backup' to `initialize'. State transitions may not be immediate; they sometimes depend on other factors, such as the interface (IF) state. The `swL3VrrpOperAdminState' object must be set to `down' prior to modifying the other read-create objects in the conceptual row. The value of the `swL3VrrpOperRowStatus' object (below) must be `active', signifying that the conceptual row is valid (i.e., the objects are correctly set), in order for this object to be set to `up'.
1.3.6.1.4.1.171.11.117.2.1.3.14.1.1.5INTEGER {up(1), down(2)}read-createcurrent
swL3VrrpOperPriority
OBJECT-TYPE
This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to indicate that this router has ceased to participate in VRRP and a backup virtual router should transition to become a new master. A priority of 255 is used for the router that owns the associated IP address(es).
1.3.6.1.4.1.171.11.117.2.1.3.14.1.1.6Integer32 (0..255)read-createcurrent
swL3VrrpOperMasterIpAddr
OBJECT-TYPE
The master router's real (primary) IP address. This is the IP address listed as the source in VRRP advertisement last received by this virtual router.
1.3.6.1.4.1.171.11.117.2.1.3.14.1.1.7IpAddressread-onlycurrent
swL3VrrpOperCriticalIpAddr
OBJECT-TYPE
In the case where there is more than one IP address for a given `ifIndex', this object is used to specify the IP address that will become the `swL3VrrpOperMasterIpAddr', should the virtual router transition from backup to master. If this object is set to 0.0.0.0, the IP address which is numerically lowest will be selected.
1.3.6.1.4.1.171.11.117.2.1.3.14.1.1.8IpAddressread-createcurrent
swL3VrrpOperCheckCriticalIpState
OBJECT-TYPE
Critical IP state.
1.3.6.1.4.1.171.11.117.2.1.3.14.1.1.9INTEGER {other(0), disabled(1), enabled(2)}read-createcurrent
swL3VrrpOperAuthType
OBJECT-TYPE
Authentication type used for VRRP protocol exchanges between virtual routers. This value of this object is the same for a given ifIndex. New enumerations to this list can only be added via a new RFC on the standards track.
1.3.6.1.4.1.171.11.117.2.1.3.14.1.1.10INTEGER {noAuthentication(1), simpleTextPassword(2), ipAuthenticationHeader(3)}read-createcurrent
swL3VrrpOperAuthKey
OBJECT-TYPE
The Authentication Key. This object is set according to the value of the 'swL3VrrpOperAuthType' object ('simpleTextPassword' or 'ipAuthenticationHeader'). If the length of the value is less than 16 octets, the agent will left adjust and zero fill to 16 octets. The value of this object is the same for a given ifIndex. When read, swL3VrrpOperAuthKey always returns an Octet String of length zero.
1.3.6.1.4.1.171.11.117.2.1.3.14.1.1.11OCTET STRING (SIZE(0..16))read-createcurrent
swL3VrrpOperAdvertisementInterval
OBJECT-TYPE
The time interval, in seconds, between sending advertisement messages. Only the master router sends VRRP advertisements.
1.3.6.1.4.1.171.11.117.2.1.3.14.1.1.12Integer32 (1..255)read-createcurrent
swL3VrrpOperPreemptMode
OBJECT-TYPE
Controls whether a higher priority virtual router will preempt a lower priority master.
1.3.6.1.4.1.171.11.117.2.1.3.14.1.1.13TruthValueread-createcurrent
swL3VrrpOperVirtualRouterUpTime
OBJECT-TYPE
This is the value of the `sysUpTime' object when this virtual router (i.e., the `swL3VrrpOperState') transitioned out of `initialized'.
1.3.6.1.4.1.171.11.117.2.1.3.14.1.1.14TimeStampread-onlycurrent
swL3VrrpOperVirtualIpAddr
OBJECT-TYPE
The assigned IP addresses that a virtual router is responsible for backing up.
1.3.6.1.4.1.171.11.117.2.1.3.14.1.1.15IpAddressread-createcurrent
swL3VrrpOperRowStatus
OBJECT-TYPE
The row status variable, used in accordance to installation and removal conventions for conceptual rows. The rowstatus of a currently active row in the vrrpOperTable is constrained by the operational state of the corresponding virtual router. When `vrrpOperRowStatus' is set to active(1), no other objects in the conceptual row, with the exception of `swL3VrrpOperAdminState', can be modified. Prior to setting the `swL3VrrpOperRowStatus' object from `active' to a different value, the `swL3VrrpOperAdminState' object must be set to `down' and the `vrrpOperState' object be transitioned to `initialize'. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the `vrrpOperRowStatus' column will be read as notReady(3). In particular, a newly created row cannot be made active(1) until (minimally) the corresponding instance of `swL3VrrpOperVrId' has been set and there is at least one active row in the `swL3VrrpAssoIpAddrTable' defining an associated IP address for the virtual router.
1.3.6.1.4.1.171.11.117.2.1.3.14.1.1.16RowStatusread-createcurrent
swL3OspfECMPMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.2.1.3.15
swL3OspfECMPIpDestination
OBJECT-TYPE
If set to 'enabled (1)', the ECMP algorithm will include the destination IP.
1.3.6.1.4.1.171.11.117.2.1.3.15.1INTEGER {enabled(1), disabled(2)}read-writecurrent
swL3OspfECMPIpSource
OBJECT-TYPE
If set to 'enabled (1)', the ECMP algorithm will include the lower 5 bits of the source IP. This attribution is mutually exclusive with crc_low and crc_high. If set to 'enabled (1)', crc_low and crc_high will be excluded.
1.3.6.1.4.1.171.11.117.2.1.3.15.2INTEGER {enabled(1), disabled(2)}read-writecurrent
swL3OspfECMPCrcLow
OBJECT-TYPE
If set to 'enabled (1)', the ECMP algorithm will include the lower 5 bits of the CRC. This attribution is mutually exclusive with crc_high and ip_source. If set to 'enabled (1)', crc_high and ip_source will be excluded.
1.3.6.1.4.1.171.11.117.2.1.3.15.3INTEGER {enabled(1), disabled(2)}read-writecurrent
swL3OspfECMPCrcHigh
OBJECT-TYPE
If set to 'enabled (1)', the ECMP algorithm will include the upper 5 bits of the CRC. This attribution is mutually exclusive with ip_source and crc_low. If set to 'enabled (1)', crc_low and ip_source will be excluded.
1.3.6.1.4.1.171.11.117.2.1.3.15.4INTEGER {enabled(1), disabled(2)}read-writecurrent
swL3OspfECMPTCPorUDPport
OBJECT-TYPE
If set to 'enabled (1)', the ECMP algorithm will include the TCP or UDP port.
1.3.6.1.4.1.171.11.117.2.1.3.15.5INTEGER {enabled(1), disabled(2)}read-writecurrent
swL3OspfECMPState
OBJECT-TYPE
This object indicates the state of the OSPF ECMP function.
1.3.6.1.4.1.171.11.117.2.1.3.15.6INTEGER {enabled(1), disabled(2)}read-writecurrent
swL3RIPTimerMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.2.1.3.17
swL3RIPUpdateTime
OBJECT-TYPE
This object specifies the RIP update timer.
1.3.6.1.4.1.171.11.117.2.1.3.17.1INTEGER (5..65535)read-writecurrent
swL3RIPTimeOutTime
OBJECT-TYPE
This object specifies the RIP time out timer.
1.3.6.1.4.1.171.11.117.2.1.3.17.2INTEGER (5..65535)read-writecurrent
swL3RIPGarbageCollectionTime
OBJECT-TYPE
This object specifies the RIP garbage collection timer.
1.3.6.1.4.1.171.11.117.2.1.3.17.3INTEGER (5..65535)read-writecurrent
swL3OspfDefInfoOrigMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.2.1.3.18
swL3OspfDefInfoOriginate
OBJECT-TYPE
This object indicates if OSPF default external route is originated.
1.3.6.1.4.1.171.11.117.2.1.3.18.1INTEGER {always(1), default(2), none(3)}read-writecurrent
swL3OspfDefInfoOrigMetricType
OBJECT-TYPE
This object indicates the metric type of default external route originated by OSPF.
1.3.6.1.4.1.171.11.117.2.1.3.18.2INTEGER {type-1(1), type-2(2)}read-writecurrent
swL3OspfDefInfoOrigMetric
OBJECT-TYPE
This object indicates the metric of default external route originated by OSPF.
1.3.6.1.4.1.171.11.117.2.1.3.18.3INTEGER (1..65535)read-writecurrent
swL3RIPInboundRouteFilterTable
OBJECT-TYPE
The list of inbound route filter on RIP interfaces.
1.3.6.1.4.1.171.11.117.2.1.3.19not-accessiblecurrent
swL3RIPInboundRouteFilterEntry
OBJECT-TYPE
The information of inbound route filter on RIP interfaces.
1.3.6.1.4.1.171.11.117.2.1.3.19.1not-accessiblecurrent
swL3RIPInboundRouteFilterIfIpAddress
OBJECT-TYPE
The IP Address of the RIP interface.
1.3.6.1.4.1.171.11.117.2.1.3.19.1.1IpAddressread-onlycurrent
swL3RIPInboundRouteFilterType
OBJECT-TYPE
The type of inbound route filter for the RIP interface.
1.3.6.1.4.1.171.11.117.2.1.3.19.1.2INTEGER {none(1), access_list(2)}read-writecurrent
swL3RIPInboundRouteFilterName
OBJECT-TYPE
The name of inbound route filter for the RIP interface.
1.3.6.1.4.1.171.11.117.2.1.3.19.1.3DisplayString (SIZE(0..16))read-writecurrent
swL3Route6RedistriTable
OBJECT-TYPE
IPv6 Route redistribution allows routers on the network that are running different routing protocols to exchange routing information. This is accomplished by comparing the routes stored in the varios routers' routing tables and assigning appropriate metrics. This information is then exchanged among the various routers according to the individual routers current routing protocol.
1.3.6.1.4.1.171.11.117.2.1.3.20not-accessiblecurrent
swL3Route6RedistriEntry
OBJECT-TYPE
A list of information displaying the IPv6 route redistribution table.
1.3.6.1.4.1.171.11.117.2.1.3.20.1not-accessiblecurrent
swL3Route6RedistriSrcProtocol
OBJECT-TYPE
Allows the selection of the protocol of the source device.
1.3.6.1.4.1.171.11.117.2.1.3.20.1.1INTEGER {local(1), static(2), ripng(3), ospfv3(4)}read-onlycurrent
swL3Route6RedistriDstProtocol
OBJECT-TYPE
Allows the selection of the protocol of the destination device.
1.3.6.1.4.1.171.11.117.2.1.3.20.1.2INTEGER {ripng(1), ospfv3(2)}read-onlycurrent
swL3Route6RedistriType
OBJECT-TYPE
Allows the selection of one of the methods for calculating the metric value.
1.3.6.1.4.1.171.11.117.2.1.3.20.1.3INTEGER {type-1(1), type-2(2), all(3)}read-createcurrent
swL3Route6RedistriMetric
OBJECT-TYPE
Allows the entry of an OSPFv3 interface cost. This is analogous to a Hop Count in the RIPng routing protocol. The value '0' indicates default value.
1.3.6.1.4.1.171.11.117.2.1.3.20.1.4Unsigned32read-createcurrent
swL3Route6RedistriRowStatus
OBJECT-TYPE
This object indicates the status of this entry.
1.3.6.1.4.1.171.11.117.2.1.3.20.1.5RowStatusread-createcurrent