MIBs Depot

DES3852-SWL3MGMT-MIB

Registered at
1.3.6.1.4.1.171.11.69.4.3
Last updated
1908-05-22 00:00
Organization
D-Link Corp.
Namespace
dlink
Source file
DES3852-SWL3MGMT-MIB
Digest
sha256:c6cc6da6e97e05d987d51c78b688994f001425ed678fae6acb1beba32caee105

Description

The Structure of Layer 3 Network Management Information for the proprietary enterprise.

Contact

http://support.dlink.com

Imports

FromSymbols
IF-MIBInterfaceIndex
OSPF-MIBAreaID, DesignatedRouterPriority, HelloRange, Metric, PositiveInteger, RouterID, Status, TOSType, UpToMaxAge
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue
SW3800PRIMGMT-MIBdes3852

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

DES3852-SWL3MGMT-MIB
DLINK-ID-REC-MIB
IANAifType-MIB
IF-MIB
OSPF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
SW3800PRIMGMT-MIB

Textual conventions

NameOIDSyntaxAccessStatus
NetAddress
type
NodeAddress
type

Objects

NameOIDSyntaxAccessStatus
swL3DevMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.69.4.3.1
swL3DevCtrl
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.69.4.3.1.1
swL3DevCtrlRIPState
OBJECT-TYPE
This object indicates if the Routing Information Protocol (RIP) version 2 function is enabled or disabled.
1.3.6.1.4.1.171.11.69.4.3.1.1.1INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL3DevCtrlOSPFState
OBJECT-TYPE
This object indicates if the OSPF protocol is enabled or disabled.
1.3.6.1.4.1.171.11.69.4.3.1.1.2INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL3DevCtrlDVMRPState
OBJECT-TYPE
This object indicates if the DVMRP protocol is enabled or disabled.
1.3.6.1.4.1.171.11.69.4.3.1.1.3INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL3DevCtrlPIMState
OBJECT-TYPE
This object indicates if the PIM protocol is enabled or disabled.
1.3.6.1.4.1.171.11.69.4.3.1.1.4INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL3DevCtrlVRRPState
OBJECT-TYPE
This object indicates if the VRRP protocol is enabled or disabled.
1.3.6.1.4.1.171.11.69.4.3.1.1.5INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL3DevCtrlOSPFECMPState
OBJECT-TYPE
This object indicates if the ECMP for OSPF protocol is enabled or disabled.
1.3.6.1.4.1.171.11.69.4.3.1.1.8INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL3IpMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.69.4.3.2
swL3IpCtrlMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.69.4.3.2.1
swL3IpCtrlTable
OBJECT-TYPE
This table contains the IP interface information.
1.3.6.1.4.1.171.11.69.4.3.2.1.1not-accessiblecurrent
swL3IpCtrlEntry
OBJECT-TYPE
A list of information about a specific IP interface.
1.3.6.1.4.1.171.11.69.4.3.2.1.1.1not-accessiblecurrent
swL3IpCtrlIpAddr
OBJECT-TYPE
The IP address of the interface. This object can only contain the value of the unicast IP address.
1.3.6.1.4.1.171.11.69.4.3.2.1.1.1.1IpAddressnot-accessiblecurrent
swL3IpCtrlIfIndex
OBJECT-TYPE
This object uniquely identifies the IP interface number in the swL3IpCtrlTable.
1.3.6.1.4.1.171.11.69.4.3.2.1.1.1.2INTEGER (0..65535)read-onlycurrent
swL3IpCtrlInterfaceName
OBJECT-TYPE
This object indicates the name of the IP interface.
1.3.6.1.4.1.171.11.69.4.3.2.1.1.1.3DisplayString (SIZE(1..12))read-createcurrent
swL3IpCtrlIpSubnetMask
OBJECT-TYPE
The IP net mask for this interface.
1.3.6.1.4.1.171.11.69.4.3.2.1.1.1.4IpAddressread-createcurrent
swL3IpCtrlVlanName
OBJECT-TYPE
This object indicates the IP control entry's VLAN name. The VLAN name in each entry must be unique in the IP Control Table.
1.3.6.1.4.1.171.11.69.4.3.2.1.1.1.5DisplayString (SIZE(0..32))read-createcurrent
swL3IpCtrlMode
OBJECT-TYPE
This object indicates the IP operation mode. other (1) - This entry is currently in use but the conditions under which it will remain so are different from each of the following values. manual (2) - The IP address will be set manually. bootp (3) - The IP address will be set automatically from the BOOTP server. dhcp (4) - The IP address will be set automatically from the DHCP server.
1.3.6.1.4.1.171.11.69.4.3.2.1.1.1.6INTEGER {other(1), manual(2), bootp(3), dhcp(4)}read-createcurrent
swL3IpCtrlSecondary
OBJECT-TYPE
When this is true (1) the IP address is the secondary IP. When false (2), the IP address is the primary IP.
1.3.6.1.4.1.171.11.69.4.3.2.1.1.1.7TruthValueread-createcurrent
swL3IpCtrlState
OBJECT-TYPE
This variable displays the status of the entry. The status used for creating, modifying, and deleting instances of objects is in this table.
1.3.6.1.4.1.171.11.69.4.3.2.1.1.1.8RowStatusread-createcurrent
swL3IpCtrlOperState
OBJECT-TYPE
The current operational state of the IP interface.
1.3.6.1.4.1.171.11.69.4.3.2.1.1.1.9INTEGER {other(1), up(2), down(3)}read-onlycurrent
swL3IpCtrlProxyARPState
OBJECT-TYPE
This object indicates if the Proxy ARP function is enabled or disabled.
1.3.6.1.4.1.171.11.69.4.3.2.1.1.1.10INTEGER {other(1), disabled(2), enabled(3)}read-createcurrent
swL3VirtualIpCtrlTable
OBJECT-TYPE
This table contains the virtual IP interface information.
1.3.6.1.4.1.171.11.69.4.3.2.1.2not-accessiblecurrent
swL3VirtualIpCtrlEntry
OBJECT-TYPE
A list of information about a specific virtual IP interface.
1.3.6.1.4.1.171.11.69.4.3.2.1.2.1not-accessiblecurrent
swL3VirtualIpCtrlInterfaceName
OBJECT-TYPE
This object indicates the name of the virtual IP interface.
1.3.6.1.4.1.171.11.69.4.3.2.1.2.1.1DisplayString (SIZE(1..12))not-accessiblecurrent
swL3VirtualIpCtrlIfIndex
OBJECT-TYPE
This object uniquely identifies the virtual IP interface number in the swL3VirtualIpCtrlEntry.
1.3.6.1.4.1.171.11.69.4.3.2.1.2.1.2INTEGER (0..65535)read-onlycurrent
swL3VirtualIpCtrlIpAddr
OBJECT-TYPE
The virtual IP address of the interface. This object can only take the value of the unicast IP address.
1.3.6.1.4.1.171.11.69.4.3.2.1.2.1.3IpAddressread-createcurrent
swL3VirtualIpCtrlIpSubnetMask
OBJECT-TYPE
The net mask for this interface.
1.3.6.1.4.1.171.11.69.4.3.2.1.2.1.4IpAddressread-onlycurrent
swL3VirtualIpCtrlOperState
OBJECT-TYPE
The current operational state of the virtual IP interface.
1.3.6.1.4.1.171.11.69.4.3.2.1.2.1.5INTEGER {other(1), up(2), down(3)}read-onlycurrent
swL3VirtualIpCtrlState
OBJECT-TYPE
This variable displays the status of the entry. The status used for creating, modifying, and deleting instances of the objects in this table.
1.3.6.1.4.1.171.11.69.4.3.2.1.2.1.9RowStatusread-createcurrent
swL3IpFdbMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.69.4.3.2.2
swL3IpFdbInfoTable
OBJECT-TYPE
A table that contains forwarding and/or filtering information. This information is used by the switch to determine how to propagate the received IP packets.
1.3.6.1.4.1.171.11.69.4.3.2.2.1not-accessiblecurrent
swL3IpFdbInfoEntry
OBJECT-TYPE
Information about a specific IP address for which the bridge has some forwarding and/or filtering information.
1.3.6.1.4.1.171.11.69.4.3.2.2.1.1not-accessiblecurrent
swL3IpFdbInfoIpAddr
OBJECT-TYPE
An IP address for which the switch has forwarding and/or filtering information.
1.3.6.1.4.1.171.11.69.4.3.2.2.1.1.1IpAddressread-onlycurrent
swL3IpFdbInfoIpSubnetMask
OBJECT-TYPE
An IP net mask for this interface for which the switch has forwarding and/or filtering information.
1.3.6.1.4.1.171.11.69.4.3.2.2.1.1.2IpAddressread-onlycurrent
swL3IpFdbInfoPort
OBJECT-TYPE
Either the value '0', or the port number of the packet that has an IP address equal to the value of the corresponding instance of swL3IpFdbInfoIpAddr that has been seen. A value of '0' indicates that the port number has not been learned, but that the switch does have some forwarding/filtering information about this address.
1.3.6.1.4.1.171.11.69.4.3.2.2.1.1.3INTEGER (0..65535)read-onlycurrent
swL3IpFdbInfoType
OBJECT-TYPE
The status of this entry.
1.3.6.1.4.1.171.11.69.4.3.2.2.1.1.4INTEGER {other(1), static(2), dynamic(3)}read-onlycurrent
swL3IpArpAgingTime
OBJECT-TYPE
The timeout period in minutes for aging out dynamically learned ARP information.
1.3.6.1.4.1.171.11.69.4.3.2.4INTEGER (0..65535)read-writecurrent
swL3IpStaticRouteTable
OBJECT-TYPE
This entity's IP static routing table.
1.3.6.1.4.1.171.11.69.4.3.2.5not-accessiblecurrent
swL3IpStaticRouteEntry
OBJECT-TYPE
A particular route to a particular destination, under a particular policy. Once an entry is built, it shouldn't be modified. That is, it just supports a create or delete action.
1.3.6.1.4.1.171.11.69.4.3.2.5.1not-accessiblecurrent
swL3IpStaticRouteDest
OBJECT-TYPE
The destination IP address of this route. This object will not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object with a value of x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the swL3IpStaticRouteMask object is not equal to x.
1.3.6.1.4.1.171.11.69.4.3.2.5.1.1IpAddressread-onlycurrent
swL3IpStaticRouteMask
OBJECT-TYPE
Indicates that the mask is to be logical-ANDed with the destination address before being compared to the value in the swL3IpStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the swL3IpStaticRouteMask by referring to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to the value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the swL3IpStaticRouteDest object is not equal to swL3IpStaticRouteDest.
1.3.6.1.4.1.171.11.69.4.3.2.5.1.2IpAddressread-onlycurrent
swL3IpStaticRouteBkupState
OBJECT-TYPE
The routing state for this route. The value should be primary (1) or backup (2).
1.3.6.1.4.1.171.11.69.4.3.2.5.1.3INTEGER {primary(1), backup(2)}read-onlycurrent
swL3IpStaticRouteNextHop
OBJECT-TYPE
On remote routes, the address of the next system route; Otherwise, 0.0.0.0.
1.3.6.1.4.1.171.11.69.4.3.2.5.1.4IpAddressread-createcurrent
swL3IpStaticRouteMetric
OBJECT-TYPE
The routing metric for this route.
1.3.6.1.4.1.171.11.69.4.3.2.5.1.5INTEGER (1..65535)read-createcurrent
swL3IpStaticRouteStatus
OBJECT-TYPE
This object indicates the status of this entry. other (1) - This entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid (2) ¡V If this value is written to the object, the corresponding entry will be removed from the table. Valid (3) - This entry will reside in the table.
1.3.6.1.4.1.171.11.69.4.3.2.5.1.6INTEGER {other(1), invalid(2), valid(3)}read-createcurrent
swL3RelayMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.69.4.3.3
swL3RelayBootpMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.69.4.3.3.1
swL3RelayBootpState
OBJECT-TYPE
This object indicates if the BOOTP Relay function is enabled or disabled.
1.3.6.1.4.1.171.11.69.4.3.3.1.1INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL3RelayBootpHopCount
OBJECT-TYPE
This object indicates the maximum number of router hops that the BOOTP packets can cross.
1.3.6.1.4.1.171.11.69.4.3.3.1.2INTEGER (0..65535)read-writecurrent
swL3RelayBootpTimeThreshold
OBJECT-TYPE
This object indicates the minimum time in seconds within which the switch must relay the BOOTP request. If this time is exceeded, the switch will drop the BOOTP packet.
1.3.6.1.4.1.171.11.69.4.3.3.1.3INTEGER (0..65535)read-writecurrent
swL3RelayBootpOption82State
OBJECT-TYPE
This object indicates if the DHCP relay agent information option 82 function is enabled or disabled.
1.3.6.1.4.1.171.11.69.4.3.3.1.4INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL3RelayBootpOption82Check
OBJECT-TYPE
This object indicates if the checking mechanism of DHCP relay agent information option 82 is enabled or disabled.
1.3.6.1.4.1.171.11.69.4.3.3.1.5INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL3RelayBootpOption82Policy
OBJECT-TYPE
This object indicates the reforwarding policy of DHCP relay agent information option 82. replace (1) - Replace the existing option 82 field in messages. drop (2) - Discard messages with the existing option 82 field. keep (3) - Retain the existing option 82 field in messages.
1.3.6.1.4.1.171.11.69.4.3.3.1.6INTEGER {replace(1), drop(2), keep(3)}read-writecurrent
swL3RelayBootpCtrlTable
OBJECT-TYPE
This table specifies the IP address as a destination to forward (relay) BOOTP packets to.
1.3.6.1.4.1.171.11.69.4.3.3.1.7not-accessiblecurrent
swL3RelayBootpCtrlEntry
OBJECT-TYPE
A list of information that specifies the IP address of a destination to forward (relay) BOOTP packets to.
1.3.6.1.4.1.171.11.69.4.3.3.1.7.1not-accessiblecurrent
swL3RelayBootpCtrlInterfaceName
OBJECT-TYPE
The name of the IP interface.
1.3.6.1.4.1.171.11.69.4.3.3.1.7.1.1DisplayString (SIZE(0..12))read-onlycurrent
swL3RelayBootpCtrlServer
OBJECT-TYPE
The BOOTP server IP address.
1.3.6.1.4.1.171.11.69.4.3.3.1.7.1.2IpAddressread-onlycurrent
swL3RelayBootpCtrlState
OBJECT-TYPE
This object indicates the status of this entry. other (1) - This entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid (2) ¡V If this value is written to the object, the corresponding entry will be removed from the table. valid (3) - This entry will reside in the table.
1.3.6.1.4.1.171.11.69.4.3.3.1.7.1.3INTEGER {other(1), invalid(2), valid(3)}read-writecurrent
swL3RelayDnsMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.69.4.3.3.2
swL3RelayDnsState
OBJECT-TYPE
This object indicates if the DNS Relay function is enabled or disabled.
1.3.6.1.4.1.171.11.69.4.3.3.2.1INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL3RelayDnsPrimaryServer
OBJECT-TYPE
This object indicates the address of the primary DNS server.
1.3.6.1.4.1.171.11.69.4.3.3.2.2IpAddressread-writecurrent
swL3RelayDnsSecondaryServer
OBJECT-TYPE
This object indicates the address of the secondary DNS server.
1.3.6.1.4.1.171.11.69.4.3.3.2.3IpAddressread-writecurrent
swL3RelayDnsCacheState
OBJECT-TYPE
This object indicates if the DNS Relay cache is enabled or disabled.
1.3.6.1.4.1.171.11.69.4.3.3.2.4INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL3RelayDnsStaticTableState
OBJECT-TYPE
This object indicates if the DNS Relay static table is enabled or disabled.
1.3.6.1.4.1.171.11.69.4.3.3.2.5INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL3RelayDnsCtrlTable
OBJECT-TYPE
This table display the current DNS relay static table.
1.3.6.1.4.1.171.11.69.4.3.3.2.6not-accessiblecurrent
swL3RelayDnsCtrlEntry
OBJECT-TYPE
A list of information displaying the current DNS relay static table.
1.3.6.1.4.1.171.11.69.4.3.3.2.6.1not-accessiblecurrent
swL3RelayDnsCtrlDomainName
OBJECT-TYPE
The domain name of this entry.
1.3.6.1.4.1.171.11.69.4.3.3.2.6.1.1DisplayString (SIZE(1..32))read-onlycurrent
swL3RelayDnsCtrlIpAddr
OBJECT-TYPE
The IP address of this entry.
1.3.6.1.4.1.171.11.69.4.3.3.2.6.1.2IpAddressread-onlycurrent
swL3RelayDnsCtrlState
OBJECT-TYPE
This object indicates the status of this entry. other (1) - This entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid (2) ¡V If this value is written to the object, the corresponding entry will be removed from the table. valid (3) - This entry will reside in the table.
1.3.6.1.4.1.171.11.69.4.3.3.2.6.1.3INTEGER {other(1), invalid(2), valid(3)}read-writecurrent
swL3Md5Table
OBJECT-TYPE
This table display the current MD5 key table.
1.3.6.1.4.1.171.11.69.4.3.4not-accessiblecurrent
swL3Md5Entry
OBJECT-TYPE
A list of information displaying the current MD5 key table.
1.3.6.1.4.1.171.11.69.4.3.4.1not-accessiblecurrent
swL3Md5KeyId
OBJECT-TYPE
The MD5 key ID.
1.3.6.1.4.1.171.11.69.4.3.4.1.1INTEGER (1..255)read-onlycurrent
swL3Md5Key
OBJECT-TYPE
An MD5 password of up to 16 bytes.
1.3.6.1.4.1.171.11.69.4.3.4.1.2DisplayString (SIZE(1..16))read-createcurrent
swL3Md5RowStatus
OBJECT-TYPE
This object indicates the status of this entry.
1.3.6.1.4.1.171.11.69.4.3.4.1.3RowStatusread-createcurrent
swL3RouteRedistriTable
OBJECT-TYPE
Route redistribution allows routers on the network that are running different routing protocols to exchange routing information. This is accomplished by comparing the routes stored in the various routers routing tables and assigning appropriate metrics. This information is then exchanged among the various routers according to the individual routers current routing protocol.
1.3.6.1.4.1.171.11.69.4.3.5not-accessiblecurrent
swL3RouteRedistriEntry
OBJECT-TYPE
A list of information displaying the route redistribution table.
1.3.6.1.4.1.171.11.69.4.3.5.1not-accessiblecurrent
swL3RouteRedistriSrcProtocol
OBJECT-TYPE
Allows the selection of the protocol for the source device.
1.3.6.1.4.1.171.11.69.4.3.5.1.1INTEGER {other(1), rip(2), ospf(3), static(4), local(5)}read-onlycurrent
swL3RouteRedistriDstProtocol
OBJECT-TYPE
Allows the selection of the protocol for the destination device.
1.3.6.1.4.1.171.11.69.4.3.5.1.2INTEGER {other(1), rip(2), ospf(3)}read-onlycurrent
swL3RouteRedistriType
OBJECT-TYPE
Allows the selection of one of the methods for calculating the metric value.
1.3.6.1.4.1.171.11.69.4.3.5.1.3INTEGER {other(1), all(2), type-1(3), type-2(4), internal(5), external(6), inter-E1(7), inter-E2(8), extType1(9), extType2(10)}read-createcurrent
swL3RouteRedistriMetric
OBJECT-TYPE
Allows the entry of an OSPF interface cost. This is analogous to a Hop Count in the RIP routing protocol. The value '0' indicates the default value.
1.3.6.1.4.1.171.11.69.4.3.5.1.4INTEGER (0..16777214)read-createcurrent
swL3RouteRedistriRowStatus
OBJECT-TYPE
This object indicates the status of this entry.
1.3.6.1.4.1.171.11.69.4.3.5.1.5RowStatusread-createcurrent
swL3OspfHostTable
OBJECT-TYPE
The list of hosts and their metrics that the router will advertise as host routes.
1.3.6.1.4.1.171.11.69.4.3.6not-accessiblecurrent
swL3OspfHostEntry
OBJECT-TYPE
A metric to be advertised, for a given type of service, when a given host is reachable.
1.3.6.1.4.1.171.11.69.4.3.6.1not-accessiblecurrent
swL3OspfHostIpAddress
OBJECT-TYPE
The IP address of the host.
1.3.6.1.4.1.171.11.69.4.3.6.1.1IpAddressread-onlycurrent
swL3OspfHostTOS
OBJECT-TYPE
The Type of Service for the route being configured.
1.3.6.1.4.1.171.11.69.4.3.6.1.2TOSTyperead-onlycurrent
swL3OspfHostMetric
OBJECT-TYPE
The metric to be advertised.
1.3.6.1.4.1.171.11.69.4.3.6.1.3Metricread-createcurrent
swL3OspfHostAreaID
OBJECT-TYPE
The area of the host entry to be found within. By default, this is the area that a subsuming OSPF interface is in, or 0.0.0.0
1.3.6.1.4.1.171.11.69.4.3.6.1.4AreaIDread-createcurrent
swL3OspfHostStatus
OBJECT-TYPE
This variable displays the status of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
1.3.6.1.4.1.171.11.69.4.3.6.1.5RowStatusread-createcurrent
swL3ospfVirtIfTable
OBJECT-TYPE
Information about this router's virtual inter- faces.
1.3.6.1.4.1.171.11.69.4.3.7not-accessiblecurrent
swL3ospfVirtIfEntry
OBJECT-TYPE
Information about a single virtual interface.
1.3.6.1.4.1.171.11.69.4.3.7.1not-accessiblecurrent
swL3ospfVirtIfAreaId
OBJECT-TYPE
The transit area that the virtual link traverses. By definition, this is not 0.0.0.0
1.3.6.1.4.1.171.11.69.4.3.7.1.1AreaIDread-onlycurrent
swL3ospfVirtIfNeighbor
OBJECT-TYPE
The router ID of the virtual neighbor.
1.3.6.1.4.1.171.11.69.4.3.7.1.2RouterIDread-onlycurrent
swL3ospfVirtIfTransitDelay
OBJECT-TYPE
The estimated number of seconds it takes to transmit a link-state update packet over this interface.
1.3.6.1.4.1.171.11.69.4.3.7.1.3UpToMaxAgeread-createcurrent
swL3ospfVirtIfRetransInterval
OBJECT-TYPE
The number of seconds between link-state advertisement retransmissions for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets. This value should be well over the expected round-trip time.
1.3.6.1.4.1.171.11.69.4.3.7.1.4UpToMaxAgeread-createcurrent
swL3ospfVirtIfHelloInterval
OBJECT-TYPE
The length of time, in seconds, between the hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.
1.3.6.1.4.1.171.11.69.4.3.7.1.5HelloRangeread-createcurrent
swL3ospfVirtIfRtrDeadInterval
OBJECT-TYPE
The number of seconds that a router's hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the hello interval. This value must be the same for the virtual neigh- bor.
1.3.6.1.4.1.171.11.69.4.3.7.1.6PositiveIntegerread-createcurrent
swL3ospfVirtIfState
OBJECT-TYPE
OSPF virtual interface states.
1.3.6.1.4.1.171.11.69.4.3.7.1.7INTEGER {down(1), pointToPoint(4)}read-onlycurrent
swL3ospfVirtIfEvents
OBJECT-TYPE
The number of state changes or error events on this virtual link
1.3.6.1.4.1.171.11.69.4.3.7.1.8Counter32read-onlycurrent
swL3ospfVirtIfAuthType
OBJECT-TYPE
The authentication type specified for a virtu- al interface. Additional authentication types may be assigned locally.
1.3.6.1.4.1.171.11.69.4.3.7.1.9INTEGER (0..255)read-createcurrent
swL3ospfVirtIfAuthKey
OBJECT-TYPE
If authentication type is simplePassword, the device will left adjust and zero fill to 8 oc- tets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication cannot use a key of more than 8 oc- tets. Larger keys are useful only with authen- tication mechanisms not specified in this docu- ment.
1.3.6.1.4.1.171.11.69.4.3.7.1.10OCTET STRING (SIZE(0..256))read-createcurrent
swL3ospfVirtIfAuthKeyID
OBJECT-TYPE
The MD5 key ID.
1.3.6.1.4.1.171.11.69.4.3.7.1.11INTEGER (0..255)read-createcurrent
swL3ospfVirtIfStatus
OBJECT-TYPE
This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
1.3.6.1.4.1.171.11.69.4.3.7.1.12RowStatusread-createcurrent
swL3ospfIfTable
OBJECT-TYPE
The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF.
1.3.6.1.4.1.171.11.69.4.3.8not-accessiblecurrent
swL3ospfIfEntry
OBJECT-TYPE
The OSPF interface entry describes one inter- face from the viewpoint of OSPF.
1.3.6.1.4.1.171.11.69.4.3.8.1not-accessiblecurrent
swL3ospfIfIpAddress
OBJECT-TYPE
The IP address of this OSPF interface.
1.3.6.1.4.1.171.11.69.4.3.8.1.1IpAddressread-onlycurrent
swL3ospfAddressLessIf
OBJECT-TYPE
For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP addresses and the corresponding value of ifIndex for interfaces having no IP address.
1.3.6.1.4.1.171.11.69.4.3.8.1.2Integer32read-onlycurrent
swL3ospfIfAreaId
OBJECT-TYPE
A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.
1.3.6.1.4.1.171.11.69.4.3.8.1.3AreaIDread-createcurrent
swL3ospfIfType
OBJECT-TYPE
The OSPF interface type. By way of default, this field may be intuited from the corresponding value of ifType. Broad- cast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25 and similar technologies take the value 'nbma' and links that are definitively point-to-point take the value 'pointToPoint'.
1.3.6.1.4.1.171.11.69.4.3.8.1.4INTEGER {broadcast(1), nbma(2), pointToPoint(3), pointToMultipoint(5)}read-createcurrent
swL3ospfIfAdminStat
OBJECT-TYPE
The OSPF interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some areas. The value 'disabled' denotes that the interface is external to OSPF.
1.3.6.1.4.1.171.11.69.4.3.8.1.5Statusread-createcurrent
swL3ospfIfRtrPriority
OBJECT-TYPE
The priority of this interface. Used in multi-access networks, this field is used by the designated router election algorithm. The value 0 signifies that the router is not eligi- ble to become the designated router on this particular network. In the event of a tie in this value, routers will use their router ID as a tie breaker.
1.3.6.1.4.1.171.11.69.4.3.8.1.6DesignatedRouterPriorityread-createcurrent
swL3ospfIfTransitDelay
OBJECT-TYPE
The estimated number of seconds it takes to transmit a link state update packet over this interface.
1.3.6.1.4.1.171.11.69.4.3.8.1.7UpToMaxAgeread-createcurrent
swL3ospfIfRetransInterval
OBJECT-TYPE
The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets.
1.3.6.1.4.1.171.11.69.4.3.8.1.8UpToMaxAgeread-createcurrent
swL3ospfIfHelloInterval
OBJECT-TYPE
The length of time, in seconds, between the hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common network.
1.3.6.1.4.1.171.11.69.4.3.8.1.9HelloRangeread-createcurrent
swL3ospfIfRtrDeadInterval
OBJECT-TYPE
The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the hello interval. This value must be the same for all routers attached to a common network.
1.3.6.1.4.1.171.11.69.4.3.8.1.10PositiveIntegerread-createcurrent
swL3ospfIfPollInterval
OBJECT-TYPE
The larger time interval, in seconds, between the hello packets sent to an inactive non- broadcast multi-access neighbor.
1.3.6.1.4.1.171.11.69.4.3.8.1.11PositiveIntegerread-createcurrent
swL3ospfIfState
OBJECT-TYPE
The OSPF interface state.
1.3.6.1.4.1.171.11.69.4.3.8.1.12INTEGER {down(1), loopback(2), waiting(3), pointToPoint(4), designatedRouter(5), backupDesignatedRouter(6), otherDesignatedRouter(7)}read-onlycurrent
swL3ospfIfDesignatedRouter
OBJECT-TYPE
The IP address of the designated router.
1.3.6.1.4.1.171.11.69.4.3.8.1.13IpAddressread-onlycurrent
swL3ospfIfBackupDesignatedRouter
OBJECT-TYPE
The IP address of the backup designated router.
1.3.6.1.4.1.171.11.69.4.3.8.1.14IpAddressread-onlycurrent
swL3ospfIfEvents
OBJECT-TYPE
The number of times this OSPF interface has changed its state, or when an error has occurred.
1.3.6.1.4.1.171.11.69.4.3.8.1.15Counter32read-onlycurrent
swL3ospfIfMulticastForwarding
OBJECT-TYPE
The way multicasts should be forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link unicasts. Data link multicasting is not meaning- ful on point-to-point and NBMA interfaces, and setting ospfMulticastForwarding to 0 effective- ly disables all multicast forwarding.
1.3.6.1.4.1.171.11.69.4.3.8.1.16INTEGER {blocked(1), multicast(2), unicast(3)}read-createcurrent
swL3ospfIfDemand
OBJECT-TYPE
Indicates whether Demand OSPF procedures (hel- lo supression to FULL neighbors and setting the DoNotAge flag on proogated LSAs) should be per- formed on this interface.
1.3.6.1.4.1.171.11.69.4.3.8.1.17TruthValueread-createcurrent
swL3ospfIfAuthType
OBJECT-TYPE
The authentication type specified for an in- terface. Additional authentication types may be assigned locally.
1.3.6.1.4.1.171.11.69.4.3.8.1.18INTEGER (0..255)read-createcurrent
swL3ospfIfAuthKey
OBJECT-TYPE
The Authentication Key. If the Area's Author- ization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication cannot use a key of more than 8 oc- tets. Larger keys are useful only with authen- tication mechanisms not specified in this docu- ment. When read, ospfIfAuthKey will always return a zero length Octet String.
1.3.6.1.4.1.171.11.69.4.3.8.1.19OCTET STRING (SIZE(0..256))read-createcurrent
swL3ospfIfAuthKeyID
OBJECT-TYPE
The MD5 key ID.
1.3.6.1.4.1.171.11.69.4.3.8.1.20INTEGER (0..255)read-createcurrent
swL3ospfIfStatus
OBJECT-TYPE
This variable displays the status of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
1.3.6.1.4.1.171.11.69.4.3.8.1.21RowStatusread-createcurrent
swL3RoutePreference
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.69.4.3.9
swL3RoutePreferenceRIP
OBJECT-TYPE
Used to configure the RIP route preference.
1.3.6.1.4.1.171.11.69.4.3.9.1INTEGER (1..999)read-writecurrent
swL3RoutePreferenceOSPFIntra
OBJECT-TYPE
Used to configure the OSPF intra route preference.
1.3.6.1.4.1.171.11.69.4.3.9.2INTEGER (1..999)read-writecurrent
swL3RoutePreferenceStatic
OBJECT-TYPE
Used to configure the static route preference.
1.3.6.1.4.1.171.11.69.4.3.9.3INTEGER (1..999)read-writecurrent
swL3RoutePreferenceLocal
OBJECT-TYPE
Used to read the local route preference.
1.3.6.1.4.1.171.11.69.4.3.9.4INTEGER (0..999)read-onlycurrent
swL3RoutePreferenceOSPFInter
OBJECT-TYPE
Used to configure the OSPF inter route preference.
1.3.6.1.4.1.171.11.69.4.3.9.5INTEGER (1..999)read-writecurrent
swL3RoutePreferenceOSPFExtT1
OBJECT-TYPE
Used to configure the OSPF ExtT1 route preference.
1.3.6.1.4.1.171.11.69.4.3.9.6INTEGER (1..999)read-writecurrent
swL3RoutePreferenceOSPFExtT2
OBJECT-TYPE
Used to configure the OSPF ExtT2 route preference.
1.3.6.1.4.1.171.11.69.4.3.9.7INTEGER (1..999)read-writecurrent
swL3PimMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.69.4.3.11
swL3PimCbsrInfoMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.69.4.3.11.1
swL3pimCbsrBootStrapPeriod
OBJECT-TYPE
At the elected BSR, this is the interval between originating bootstrap messages, and should be equal to 60 seconds.
1.3.6.1.4.1.171.11.69.4.3.11.1.1Integer32 (1..255)read-writecurrent
swL3pimCbsrHashMaskLen
OBJECT-TYPE
The length (in bits) of the mask to use in the hash function. For IPv4 we recommend a value of 30. For IPv6 we recommand a value of 126.
1.3.6.1.4.1.171.11.69.4.3.11.1.2Integer32 (0..255)read-writecurrent
swL3pimCbsrTable
OBJECT-TYPE
The PIM CBSR Table contains the CBSR related information, like interface and priority.
1.3.6.1.4.1.171.11.69.4.3.11.1.3not-accessiblecurrent
swL3pimCbsrEntry
OBJECT-TYPE
An entry in the PIM CBSR Table.
1.3.6.1.4.1.171.11.69.4.3.11.1.3.1not-accessiblecurrent
swL3pimCbsrInterface
OBJECT-TYPE
The ifIndex value of this PIM interface.
1.3.6.1.4.1.171.11.69.4.3.11.1.3.1.1InterfaceIndexnot-accessiblecurrent
swL3pimCbsrPriority
OBJECT-TYPE
The preference value for the local interface as a candidate bootstrap router. The value of -1 is used to indicate that the local interface is not a candidate BSR interface.
1.3.6.1.4.1.171.11.69.4.3.11.1.3.1.2Integer32 (-1..255)read-writecurrent
swL3pimCandidateRPMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.69.4.3.11.2
swL3pimCandidateRPHoldtime
OBJECT-TYPE
For C-RPs, this is the holdtime specified in the C-RP-Adv message, and is used by the BSR to time out RPs. This should be set to 2.5 * [C-RP-Adv-Period]. Default: 150 seconds.
1.3.6.1.4.1.171.11.69.4.3.11.2.1Integer32 (0..255)read-writecurrent
swL3pimCandidateRPPriority
OBJECT-TYPE
The 'priority' of the included RP, for the corresponding Encoded-Group Address (if any). The highest priority is '0' (i.e. the lower the value of the 'Priority' field, the higher the priority). This field is stored at the BSR upon receipt, along with the RP address and corresponding Encoded-Group Address.
1.3.6.1.4.1.171.11.69.4.3.11.2.2Integer32 (0..255)read-writecurrent
swL3pimCandidateRPWildcardPrefixCnt
OBJECT-TYPE
The number of encoded group addresses included in the message; indicating the group prefixes for which the C-RP is advertising. A Prefix-Cnt of '0' implies a prefix of 224.0.0.0 with a mask length of 4; i.e. all multicast groups. If the C-RP is not configured with Group-prefix information, the C-RP puts a default value of '0' in this field.
1.3.6.1.4.1.171.11.69.4.3.11.2.3Integer32 (0..1)read-writecurrent
swL3pimSptMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.69.4.3.11.3
swL3pimLastHopSptThreshold
OBJECT-TYPE
Specifies a last hop router threshold.
1.3.6.1.4.1.171.11.69.4.3.11.3.1DisplayString (SIZE(1..8))read-writecurrent
swL3pimRPSptThreshold
OBJECT-TYPE
Specifies an RP threshold.
1.3.6.1.4.1.171.11.69.4.3.11.3.2DisplayString (SIZE(1..8))read-writecurrent
swL3pimRegChksumIncDataTable
OBJECT-TYPE
The PIM Register Checksum Including Data Table contains the PIM register checksum including data information, like RP address and state.
1.3.6.1.4.1.171.11.69.4.3.11.4not-accessiblecurrent
swL3pimRegChksumIncDataEntry
OBJECT-TYPE
An entry in the PIM Register Checksum Including the Data Table.
1.3.6.1.4.1.171.11.69.4.3.11.4.1not-accessiblecurrent
swL3SwL3pimRegChksumIncDataRpAddr
OBJECT-TYPE
Specifies the RP address.
1.3.6.1.4.1.171.11.69.4.3.11.4.1.1IpAddressnot-accessiblecurrent
swL3SwL3pimRegChksumIncDataState
OBJECT-TYPE
The state of register checksum including the data for RPs.
1.3.6.1.4.1.171.11.69.4.3.11.4.1.2RowStatusread-createcurrent
swL3PimInfoMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.69.4.3.11.5
swL3pimRegisterProbeTime
OBJECT-TYPE
When null registers are used, this is the time between sending a null register and the register-suppression-timer expiring unless it is restarted by receiving a register-stop. Thus, a null register would be sent when the register-suppression-timer reaches this value. Default: 5 seconds.
1.3.6.1.4.1.171.11.69.4.3.11.5.1Integer32 (1..127)read-writecurrent
swL3pimRegisterSuppressionTime
OBJECT-TYPE
This is the mean interval between receiving a register-stop and allowing registers to be sent again. A lower value means more frequent register bursts at RP, while a higher value means longer join latency for the new receiver. Default: 60 seconds.
1.3.6.1.4.1.171.11.69.4.3.11.5.2Integer32 (3..255)read-writecurrent
swL3pimInfoTable
OBJECT-TYPE
The PIM Information Table contains PIM related information, like DR priority.
1.3.6.1.4.1.171.11.69.4.3.11.5.3not-accessiblecurrent
swL3pimInfoEntry
OBJECT-TYPE
An entry in the PIM Information Table.
1.3.6.1.4.1.171.11.69.4.3.11.5.3.1not-accessiblecurrent
swL3pimInterface
OBJECT-TYPE
The ifIndex value of this PIM interface.
1.3.6.1.4.1.171.11.69.4.3.11.5.3.1.1InterfaceIndexnot-accessiblecurrent
swL3pimDRPriority
OBJECT-TYPE
The DR Priority is a 32-bit unsigned number and the numerically larger priority is always prefered. A router's idea of the current DR on an interface can change when a PIM hello message is received, when a neighbor times out, or when a router's own DR priority changes.
1.3.6.1.4.1.171.11.69.4.3.11.5.3.1.2Unsigned32 (0..4294967294)read-writecurrent
swL3pimStaticRPTable
OBJECT-TYPE
The PIM Static RP Table contains the PIM static RP related information, like group address, group mask, RP address and RP row status.
1.3.6.1.4.1.171.11.69.4.3.11.6not-accessiblecurrent
swL3pimStaticRPEntry
OBJECT-TYPE
An entry in the PIM Static RP Table.
1.3.6.1.4.1.171.11.69.4.3.11.6.1not-accessiblecurrent
swL3pimStaticRPGroupAddress
OBJECT-TYPE
The IP multicast group address which, when combined with swL3pimStaticRPGroupMask, identifies a group prefix for which the local router will advertise itself as a static RP.
1.3.6.1.4.1.171.11.69.4.3.11.6.1.1IpAddressnot-accessiblecurrent
swL3pimStaticRPGroupMask
OBJECT-TYPE
The multicast group address mask which, when combined with swL3pimStaticRPGroupAddress, identifies a group prefix for which the local router will advertise itself as a static RP.
1.3.6.1.4.1.171.11.69.4.3.11.6.1.2IpAddressnot-accessiblecurrent
swL3pimStaticRPAddress
OBJECT-TYPE
The (unicast) address of the interface which will be advertised as a static RP.
1.3.6.1.4.1.171.11.69.4.3.11.6.1.3IpAddressnot-accessiblecurrent
swL3pimStaticRPRowStatus
OBJECT-TYPE
The status of this row. New entries may be created or old entries deleted from this table.
1.3.6.1.4.1.171.11.69.4.3.11.6.1.4RowStatusread-createcurrent
swL3pimActiveRPTable
OBJECT-TYPE
The PIM Active RP Table contains the PIM active RP related information, like group address, RP address.
1.3.6.1.4.1.171.11.69.4.3.11.7not-accessiblecurrent
swL3pimActiveRPEntry
OBJECT-TYPE
An entry (conceptual row) in the swL3pimActiveRPTable.
1.3.6.1.4.1.171.11.69.4.3.11.7.1not-accessiblecurrent
swL3pimActiveRPGroupAddress
OBJECT-TYPE
The IP multicast group address for which this entry contains information about the Active-RP.
1.3.6.1.4.1.171.11.69.4.3.11.7.1.1IpAddressnot-accessiblecurrent
swL3pimActiveRPSourceIPAddress
OBJECT-TYPE
The IP address for which this entry contains information about the source of multicast data.
1.3.6.1.4.1.171.11.69.4.3.11.7.1.2IpAddressnot-accessiblecurrent
swL3pimActiveRPSourceIPMask
OBJECT-TYPE
The IP mask for which this entry contains information about the source of multicast data.
1.3.6.1.4.1.171.11.69.4.3.11.7.1.3IpAddressnot-accessiblecurrent
swL3pimActiveRPAddress
OBJECT-TYPE
The IP address of the Active-RP.
1.3.6.1.4.1.171.11.69.4.3.11.7.1.4IpAddressread-onlycurrent
swL3OspfDefaultInfoOriginate
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.69.4.3.12
swL3OspfDefaultInfoOriginateState
OBJECT-TYPE
This object indicates if the Default Info Originate is enabled or disabled.
1.3.6.1.4.1.171.11.69.4.3.12.1Statusread-writecurrent
swL3OspfDefaultInfoOriginateAlways
OBJECT-TYPE
This object indicates if the always parameter is enabled or disabled. If 'swL3OspfDefaultInfoOriginateState' is disabled, this object returns to the default setting.
1.3.6.1.4.1.171.11.69.4.3.12.2Statusread-writecurrent
swL3OspfDefaultInfoOriginateMettype
OBJECT-TYPE
This object indicates the type of AS external route. If 'swL3OspfDefaultInfoOriginateState' is disabled, this object returns to the default setting.
1.3.6.1.4.1.171.11.69.4.3.12.3INTEGER {type1(1), type2(2)}read-writecurrent
swL3OspfDefaultInfoOriginateMetric
OBJECT-TYPE
This object indicates the cost of a default route to be advertised in OSPF. The range is 0 to 16777214.
1.3.6.1.4.1.171.11.69.4.3.12.4INTEGER (0..16777214)read-writecurrent
swL3TraceRouteMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.69.4.3.13
swL3TraceRouteCtrl
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.69.4.3.13.1
swL3TraceRoutePKTToCPUState
OBJECT-TYPE
This object indicates to control whether to capture IP packet with zero TTL to CPU.
1.3.6.1.4.1.171.11.69.4.3.13.1.1INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent