DES3828DC-L2MGMT-MIB
- Registered at
- 1.3.6.1.4.1.171.11.69.2.2
- Last updated
- 1908-05-22 00:00
- Organization
- D-Link Corp.
- Namespace
- dlink
- Source file
DES3828DC-L2MGMT-MIB- Digest
sha256:7f6b5aea545e6f2d96b85317fd4c78275370abb5d2447e44ce1982498b311e77
Description
The Structure of Layer 2 Network Management Information for the proprietary enterprise.
Contact
http://support.dlink.com
Imports
| From | Symbols |
|---|---|
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION |
| SW3800PRIMGMT-MIB | des3828DC |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
DES3828DC-L2MGMT-MIB DLINK-ID-REC-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC SW3800PRIMGMT-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| PortList type | ||||
| VlanId type | ||||
| VlanIndex type |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| swL2DevMgmt OBJECT-IDENTITY | 1.3.6.1.4.1.171.11.69.2.2.1 | |||
| swL2DevInfo OBJECT-IDENTITY | 1.3.6.1.4.1.171.11.69.2.2.1.1 | |||
| swDevInfoSystemUpTime OBJECT-TYPE The value of sysUpTime at the time the switch entered its current operational state. If the current state was entered prior to the last re-initialization, then this object contains a zero value. This value is in the units of seconds. | 1.3.6.1.4.1.171.11.69.2.2.1.1.1 | TimeTicks | read-only | current |
| swDevInfoTotalNumOfPort OBJECT-TYPE The number of ports within this switch. This value is the sum of the ports within this switch. | 1.3.6.1.4.1.171.11.69.2.2.1.1.2 | INTEGER (0..65535) | read-only | current |
| swDevInfoNumOfPortInUse OBJECT-TYPE The number of ports in this switch connected to the segment or the end stations. | 1.3.6.1.4.1.171.11.69.2.2.1.1.3 | INTEGER (0..65535) | read-only | current |
| swDevInfoConsoleInUse OBJECT-TYPE The usage indication of the console system. | 1.3.6.1.4.1.171.11.69.2.2.1.1.4 | INTEGER {other(1), in-use(2), not-in-use(3)} | read-only | current |
| swDevInfoModuleType OBJECT-TYPE This object indicates the module type of this port. | 1.3.6.1.4.1.171.11.69.2.2.1.1.5 | OCTET STRING | read-only | current |
| swDevInfoFrontPanelLedMode OBJECT-TYPE This object indicates the mode of current device front panel LEDs . The front panel LED mode could be changed only by a push button on the device front panel . PortStatusMode : the LEDs respresent ports status. PoEStatusMode : the LEDs respresent POE status. | 1.3.6.1.4.1.171.11.69.2.2.1.1.6 | INTEGER {portStatusMode(1), poeStatusMode(2)} | read-only | current |
| swDevInfoPowerTable OBJECT-TYPE A list of the temperature. | 1.3.6.1.4.1.171.11.69.2.2.1.1.8 | not-accessible | current | |
| swDevInfoPowerEntry OBJECT-TYPE An entry for Power information. | 1.3.6.1.4.1.171.11.69.2.2.1.1.8.1 | not-accessible | current | |
| swDevInfoPowerUnitIndex OBJECT-TYPE Indicates the ID of the unit in the System | 1.3.6.1.4.1.171.11.69.2.2.1.1.8.1.1 | INTEGER (0..65535) | read-only | current |
| swDevInfoPowerID OBJECT-TYPE Indicates ID of the power | 1.3.6.1.4.1.171.11.69.2.2.1.1.8.1.2 | INTEGER (0..65535) | read-only | current |
| swDevInfoPowerStatus OBJECT-TYPE Indicates status of the power | 1.3.6.1.4.1.171.11.69.2.2.1.1.8.1.3 | INTEGER {other(0), lowVoltage(1), overCurrent(2), working(3), fail(4), connect(5), disconnect(6)} | read-only | current |
| swL2DevCtrl OBJECT-IDENTITY | 1.3.6.1.4.1.171.11.69.2.2.1.2 | |||
| swL2DevCtrlStpState OBJECT-TYPE This object can enable or disable the spanning tree algorithm during the runtime of the system. | 1.3.6.1.4.1.171.11.69.2.2.1.2.1 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | current |
| swL2DevCtrlIGMPSnooping OBJECT-TYPE This object indicates if the layer 2 Internet Group Management Protocol (IGMP) capture function has been enabled or disabled. | 1.3.6.1.4.1.171.11.69.2.2.1.2.2 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | current |
| swL2DevCtrlRmonState OBJECT-TYPE This object can be enable or disable RMON. | 1.3.6.1.4.1.171.11.69.2.2.1.2.3 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | current |
| swL2DevCtrlCleanAllStatisticCounter OBJECT-TYPE If the object is set to active, all the statistic counters will be cleared. If set to normal, do nothing. | 1.3.6.1.4.1.171.11.69.2.2.1.2.4 | INTEGER {normal(1), active(2)} | read-write | current |
| swL2DevCtrlVlanIdOfFDBTbl OBJECT-TYPE Indicates the VLAN ID which the Dot1dTpFdbTable belongs to ; The default value is the DEFAULT_VLAN_ID of the system. | 1.3.6.1.4.1.171.11.69.2.2.1.2.5 | VlanId | read-write | current |
| swL2MACNotifyState OBJECT-TYPE This object can enable or disable MAC Notification. | 1.3.6.1.4.1.171.11.69.2.2.1.2.6 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | current |
| swL2MACNotifyHistorySize OBJECT-TYPE This object indicates the history size of variation MAC in the address table. The default value is 1 . | 1.3.6.1.4.1.171.11.69.2.2.1.2.7 | INTEGER (1..500) | read-write | current |
| swL2MACNotifyInterval OBJECT-TYPE This object indicates the time interval in seconds for triggering the MAC notify message. | 1.3.6.1.4.1.171.11.69.2.2.1.2.8 | INTEGER (1..2147483647) | read-write | current |
| swL2DevCtrlTelnet OBJECT-IDENTITY | 1.3.6.1.4.1.171.11.69.2.2.1.2.10 | |||
| swL2DevCtrlTelnetState OBJECT-TYPE This object controls the Telnet status. | 1.3.6.1.4.1.171.11.69.2.2.1.2.10.1 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | current |
| swL2DevCtrlTelnetTcpPort OBJECT-TYPE This object can designate a TCP port. When Telnet is disabled this object isn't accessible. | 1.3.6.1.4.1.171.11.69.2.2.1.2.10.2 | INTEGER (1..65535) | read-write | current |
| swL2DevAlarm OBJECT-IDENTITY | 1.3.6.1.4.1.171.11.69.2.2.1.3 | |||
| swL2DevAlarmNewRoot OBJECT-TYPE When the device has become the new root of Spanning Tree, this object decides whether to send a new root trap. | 1.3.6.1.4.1.171.11.69.2.2.1.3.1 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | current |
| swL2DevAlarmTopologyChange OBJECT-TYPE This object determines whether to send a trap or not when the switch topology has changed. If the object is enabled(3), the topology change trap is sent by the device when any of its configured ports transition from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. For the same port transition, the device doesn't send the trap if this object value is set to disabled or other. | 1.3.6.1.4.1.171.11.69.2.2.1.3.2 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | current |
| swL2DevAlarmLinkChange OBJECT-TYPE This object determines whether to send a trap or not when the link has changed. If the object is enabled (3), the Link Change trap is sent by the device when any of its port links change. The device doesn't send the trap if this object value is set to disabled or other. | 1.3.6.1.4.1.171.11.69.2.2.1.3.3 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | current |
| swL2VlanMgmt OBJECT-IDENTITY | 1.3.6.1.4.1.171.11.69.2.2.3 | |||
| swL2VlanAdvertisementTable OBJECT-TYPE A table containing the advertisement state for each VLAN configured into the device by (local or network) management. | 1.3.6.1.4.1.171.11.69.2.2.3.1 | not-accessible | current | |
| swL2VlanAdvertisementEntry OBJECT-TYPE Advertisement state for each VLAN configured in the device. | 1.3.6.1.4.1.171.11.69.2.2.3.1.1 | not-accessible | current | |
| swL2VlanIndex OBJECT-TYPE The VLAN-ID or other identifier referring to this VLAN. | 1.3.6.1.4.1.171.11.69.2.2.3.1.1.1 | INTEGER (1..4094) | read-only | current |
| swL2VlanName OBJECT-TYPE An administratively assigned string, which may be used to identify the VLAN. | 1.3.6.1.4.1.171.11.69.2.2.3.1.1.2 | DisplayString (SIZE(0..32)) | read-only | current |
| swL2VlanAdvertiseState OBJECT-TYPE This object indicates the advertised status of this VLAN entry. | 1.3.6.1.4.1.171.11.69.2.2.3.1.1.3 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | current |
| swL2PortMgmt OBJECT-IDENTITY | 1.3.6.1.4.1.171.11.69.2.2.4 | |||
| swL2PortInfoTable OBJECT-TYPE A table that contains information about every port. | 1.3.6.1.4.1.171.11.69.2.2.4.1 | not-accessible | obsolete | |
| swL2PortInfoEntry OBJECT-TYPE A list of information for each port of the device. | 1.3.6.1.4.1.171.11.69.2.2.4.1.1 | not-accessible | obsolete | |
| swL2PortInfoPortIndex OBJECT-TYPE This object indicates the module's port number.(1..Max port number in the module). | 1.3.6.1.4.1.171.11.69.2.2.4.1.1.1 | INTEGER (0..65535) | read-only | obsolete |
| swL2PortInfoUnitIndex OBJECT-TYPE Indicates ID of the unit in the device | 1.3.6.1.4.1.171.11.69.2.2.4.1.1.2 | INTEGER (0..65535) | read-only | obsolete |
| swL2PortInfoType OBJECT-TYPE This object indicates the connector type of this port. | 1.3.6.1.4.1.171.11.69.2.2.4.1.1.3 | INTEGER {portType-100Base-TX(1), portType-100Base-FX(2), portType-100Base-FL(3), portType-1000Base-TX(4), portType-1000Base-SX(5), portType-1000Base-LX(6), none(7)} | read-only | obsolete |
| swL2PortInfoLinkStatus OBJECT-TYPE This object indicates the port link status. | 1.3.6.1.4.1.171.11.69.2.2.4.1.1.4 | INTEGER {other(1), link-pass(2), link-fail(3)} | read-only | obsolete |
| swL2PortInfoNwayStatus OBJECT-TYPE This object indicates the port speed and duplex mode. | 1.3.6.1.4.1.171.11.69.2.2.4.1.1.5 | INTEGER {other(1), auto(2), half-10Mbps(3), full-10Mbps(4), half-100Mbps(5), full-100Mbps(6), half-1Gigabps(7), full-1Gigabps(8)} | read-only | obsolete |
| swL2PortInfoModuleType OBJECT-TYPE This object indicates the module type of this port. | 1.3.6.1.4.1.171.11.69.2.2.4.1.1.6 | INTEGER {none(0), moduleType-COMBO(1), moduleType-1000T(2), moduleType-BaseModule(3)} | read-only | obsolete |
| swL2PortInfoErrorDisabled OBJECT-TYPE This object indicates the blocking type of this port. | 1.3.6.1.4.1.171.11.69.2.2.4.1.1.7 | INTEGER {none(0), storm(1), lbd(2), unknow(3)} | read-only | obsolete |
| swL2PortCtrlTable OBJECT-TYPE A table that contains control information about every port. | 1.3.6.1.4.1.171.11.69.2.2.4.2 | not-accessible | obsolete | |
| swL2PortCtrlEntry OBJECT-TYPE A list of control information for each port of the device. | 1.3.6.1.4.1.171.11.69.2.2.4.2.1 | not-accessible | obsolete | |
| swL2PortCtrlPortIndex OBJECT-TYPE This object indicates the module's port number.(1..Max port number in the module) | 1.3.6.1.4.1.171.11.69.2.2.4.2.1.1 | INTEGER (0..65535) | read-only | obsolete |
| swL2PortCtrlUnitIndex OBJECT-TYPE Indicates the ID of the unit in the device | 1.3.6.1.4.1.171.11.69.2.2.4.2.1.2 | INTEGER (0..65535) | read-only | obsolete |
| swL2PortCtrlAdminState OBJECT-TYPE This object decides whether the port is enabled or disabled. | 1.3.6.1.4.1.171.11.69.2.2.4.2.1.3 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | obsolete |
| swL2PortCtrlNwayState OBJECT-TYPE Choose the port speed, duplex mode, and N-Way function mode. | 1.3.6.1.4.1.171.11.69.2.2.4.2.1.4 | INTEGER {other(1), nway-enabled(2), nway-disabled-10Mbps-Half(3), nway-disabled-10Mbps-Full(4), nway-disabled-100Mbps-Half(5), nway-disabled-100Mbps-Full(6), nway-disabled-1Gigabps-Half(7), nway-disabled-1Gigabps-Full(8)} | read-write | obsolete |
| swL2PortCtrlFlowCtrlState OBJECT-TYPE The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mode, IEEE 802.3x flow control function sends PAUSE frames and receives PAUSE frames. | 1.3.6.1.4.1.171.11.69.2.2.4.2.1.5 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | obsolete |
| swL2PortCtrlLockState OBJECT-TYPE This object decides whether the port is locked or not. | 1.3.6.1.4.1.171.11.69.2.2.4.2.1.6 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | obsolete |
| swL2PortCtrlMACNotifyState OBJECT-TYPE This object decides whether MAC notification is enabled or not. | 1.3.6.1.4.1.171.11.69.2.2.4.2.1.7 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | obsolete |
| swL2PortCtrlJumboFrame OBJECT-TYPE This object configure the switch's jumbo frame settings. | 1.3.6.1.4.1.171.11.69.2.2.4.3 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | current |
| swL2PortInformationTable OBJECT-TYPE A table that contains information about every port. | 1.3.6.1.4.1.171.11.69.2.2.4.4 | not-accessible | current | |
| swL2PortInformationEntry OBJECT-TYPE A list of information for each port of the device. | 1.3.6.1.4.1.171.11.69.2.2.4.4.1 | not-accessible | current | |
| swL2PortInformationPortIndex OBJECT-TYPE This object indicates the module's port number.(1..Max port number in the module) | 1.3.6.1.4.1.171.11.69.2.2.4.4.1.1 | INTEGER (0..65535) | read-only | current |
| swL2PortInformationMediumType OBJECT-TYPE Indicates medium type of the port number. | 1.3.6.1.4.1.171.11.69.2.2.4.4.1.2 | INTEGER {copper(1), fiber(2)} | read-only | current |
| swL2PortInformationUnitID OBJECT-TYPE Indicates ID of the unit in the system | 1.3.6.1.4.1.171.11.69.2.2.4.4.1.3 | INTEGER (0..65535) | read-only | current |
| swL2PortInformationType OBJECT-TYPE This object indicates the connector type of this port. | 1.3.6.1.4.1.171.11.69.2.2.4.4.1.4 | INTEGER {portType-100Base-TX(1), portType-100Base-FX(2), portType-100Base-FL(3), portType-1000Base-TX(4), portType-1000Base-SX(5), portType-1000Base-LX(6), portType-1000Base-SX-GBIC(7), portType-1000Base-LX-GBIC(8), portType-1000Base-TX-GBIC(9), portType-1000Base-1394(10), portType-1000Base-TX-GBIC-COMBO(11), portType-1000Base-none-GBIC(12), portType-1000Base-SX-MGBIC(13), portType-1000Base-LX-MGBIC(14), portType-1000Base-TX-MGBIC(15), portType-1000Base-none-MGBIC(16), portType-SIO(17), portType-10G(18), portType-10G-xenpak-1310nm(19), portType-10G-xenpak-850nm(20), portType-10G-xenpak-empty(21), portType-10G-xfp-1310nm(22), portType-10G-xfp-850nm(23), portType-10G-xfp-empty(24), portType-none(25)} | read-only | current |
| swL2PortInformationLinkStatus OBJECT-TYPE This object indicates the port link status. | 1.3.6.1.4.1.171.11.69.2.2.4.4.1.5 | INTEGER {other(1), link-pass(2), link-fail(3)} | read-only | current |
| swL2PortInformationNwayStatus OBJECT-TYPE This object indicates the port speed and duplex mode. | 1.3.6.1.4.1.171.11.69.2.2.4.4.1.6 | INTEGER {other(0), empty(1), link-down(2), half-10Mbps(3), full-10Mbps(4), half-100Mbps(5), full-100Mbps(6), half-1Gigabps(7), full-1Gigabps(8), full-10Gigabps(9)} | read-only | current |
| swL2PortInformationModuleType OBJECT-TYPE This object indicates the module type of this port. | 1.3.6.1.4.1.171.11.69.2.2.4.4.1.7 | INTEGER {none(0), moduleType-COMBO(1), moduleType-1394(2), moduleType-1000T(3), moduleType-MGBIC(4), moduleType-1P-SC-SX(5), moduleType-2P-SC-SX(6), moduleType-1P-SC-LX(7), moduleType-2P-SC-LX(8), moduleType-1P-TX(9), moduleType-2P-TX(10), moduleType-1P-MTRJ-SX(11), moduleType-2P-MTRJ-SX(12), moduleType-1P-MTRJ-LX(13), moduleType-2P-MTRJ-LX(14), moduleType-1P-GBIC(15), moduleType-2P-GBIC(16), moduleType-1P-GBIC-1P-TX(17), moduleType-1P-GBIC-1P-STACK(18), moduleType-2P-STACK(19), moduleType-2P-100FX(20), moduleType-1P-100FX(21), moduleType-2P-100FX-NEW(22), moduleType-1P-100FL(23), moduleType-2P-100FL(24), moduleType-2P-100TX(25), moduleType-BaseModule-24PORT(26)} | read-only | current |
| swL2PortInformationErrorDisabled OBJECT-TYPE This object indicates the blocking type of this port. | 1.3.6.1.4.1.171.11.69.2.2.4.4.1.8 | INTEGER {none(0), storm(1), lbd(2), unknow(3)} | read-only | current |
| swL2PortControlTable OBJECT-TYPE A table that contains control information about every port. | 1.3.6.1.4.1.171.11.69.2.2.4.5 | not-accessible | current | |
| swL2PortControlEntry OBJECT-TYPE A list of control information for each port of the device. | 1.3.6.1.4.1.171.11.69.2.2.4.5.1 | not-accessible | current | |
| swL2PortControlPortIndex OBJECT-TYPE This object indicates the module's port number.(1..Max port number in the module) | 1.3.6.1.4.1.171.11.69.2.2.4.5.1.1 | INTEGER (0..65535) | read-only | current |
| swL2PortControlMediumType OBJECT-TYPE Indicates the medium type of the port number. | 1.3.6.1.4.1.171.11.69.2.2.4.5.1.2 | INTEGER {copper(1), fiber(2)} | read-only | current |
| swL2PortControlUnitIndex OBJECT-TYPE Indicates ID of the unit in the device | 1.3.6.1.4.1.171.11.69.2.2.4.5.1.3 | INTEGER (0..65535) | read-only | current |
| swL2PortControlAdminState OBJECT-TYPE This object decides if the port is enabled or disabled. | 1.3.6.1.4.1.171.11.69.2.2.4.5.1.4 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | current |
| swL2PortControlNwayState OBJECT-TYPE Choose the port speed, duplex mode, and N-Way function mode. | 1.3.6.1.4.1.171.11.69.2.2.4.5.1.5 | INTEGER {other(1), nway-enabled(2), nway-disabled-10Mbps-Half(3), nway-disabled-10Mbps-Full(4), nway-disabled-100Mbps-Half(5), nway-disabled-100Mbps-Full(6), nway-disabled-1Gigabps-Half(7), nway-disabled-1Gigabps-Full(8), nway-disabled-1Gigabps-Full-master(9), nway-disabled-1Gigabps-Full-slave(10)} | read-write | current |
| swL2PortControlFlowCtrlState OBJECT-TYPE The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mode, IEEE 802.3x flow control function sends PAUSE frames and receives PAUSE frames. | 1.3.6.1.4.1.171.11.69.2.2.4.5.1.6 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | current |
| swL2PortControlLearningState OBJECT-TYPE This object decides whether the port is locked or not. | 1.3.6.1.4.1.171.11.69.2.2.4.5.1.7 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | current |
| swL2PortControlMACNotifyState OBJECT-TYPE This object sets each port's MAC notification state. | 1.3.6.1.4.1.171.11.69.2.2.4.5.1.8 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | current |
| swL2PortControlMulticastfilter OBJECT-TYPE This object controls the multicast port filtering mode for a specified port. | 1.3.6.1.4.1.171.11.69.2.2.4.5.1.9 | INTEGER {other(0), forward-all-groups(1), forward-unregistered-groups(2), filter-unregistered-groups(3)} | read-write | current |
| swL2QOSMgmt OBJECT-IDENTITY | 1.3.6.1.4.1.171.11.69.2.2.6 | |||
| swL2QOSBandwidthControlTable OBJECT-TYPE . | 1.3.6.1.4.1.171.11.69.2.2.6.1 | not-accessible | current | |
| swL2QOSBandwidthControlEntry OBJECT-TYPE A list of information contained in swL2QOSBandwidthControlTable. | 1.3.6.1.4.1.171.11.69.2.2.6.1.1 | not-accessible | current | |
| swL2QOSBandwidthPortIndex OBJECT-TYPE Indicates the port. | 1.3.6.1.4.1.171.11.69.2.2.6.1.1.1 | INTEGER (1..650) | read-only | current |
| swL2QOSBandwidthRxRate OBJECT-TYPE Indicates the RX Rate(kbit/sec) of the specifed port. Value 0 means no limit. | 1.3.6.1.4.1.171.11.69.2.2.6.1.1.2 | INTEGER (0..1000000) | read-write | current |
| swL2QOSBandwidthTxRate OBJECT-TYPE Indicates the TX Rate(kbit/sec) of the specifed port. Value 0 means no limit. | 1.3.6.1.4.1.171.11.69.2.2.6.1.1.3 | INTEGER (0..1000000) | read-write | current |
| swL2QOSBandwidthRadiusRxRate OBJECT-TYPE The Rx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Rx Rate. | 1.3.6.1.4.1.171.11.69.2.2.6.1.1.4 | INTEGER | read-only | current |
| swL2QOSBandwidthRadiusTxRate OBJECT-TYPE The Tx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Tx Rate. | 1.3.6.1.4.1.171.11.69.2.2.6.1.1.5 | INTEGER | read-only | current |
| swL2QOSSchedulingTable OBJECT-TYPE . | 1.3.6.1.4.1.171.11.69.2.2.6.2 | not-accessible | current | |
| swL2QOSSchedulingEntry OBJECT-TYPE A list of information contained in swL2QOSSchedulingTable. | 1.3.6.1.4.1.171.11.69.2.2.6.2.1 | not-accessible | current | |
| swL2QOSSchedulingClassIndex OBJECT-TYPE Indicates the hardware queue number. | 1.3.6.1.4.1.171.11.69.2.2.6.2.1.1 | INTEGER (0..7) | read-only | current |
| swL2QOSSchedulingMaxPkts OBJECT-TYPE Indicates the maximum number of packets the hardware priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its packets. a value between 0 and 255 can be specified. | 1.3.6.1.4.1.171.11.69.2.2.6.2.1.2 | INTEGER (0..15) | read-write | current |
| swL2QOS8021pUserPriorityTable OBJECT-TYPE . | 1.3.6.1.4.1.171.11.69.2.2.6.3 | not-accessible | current | |
| swL2QOS8021pUserPriorityEntry OBJECT-TYPE A list of information contained in swL2QOS8021pUserPriorityTable. | 1.3.6.1.4.1.171.11.69.2.2.6.3.1 | not-accessible | current | |
| swL2QOS8021pUserPriorityIndex OBJECT-TYPE The 802.1p user priority . | 1.3.6.1.4.1.171.11.69.2.2.6.3.1.1 | INTEGER (0..7) | read-only | current |
| swL2QOS8021pUserPriorityClass OBJECT-TYPE The number of the switch's hardware priority queue. The switch has four hardware priority queues available. They are numbered between 0 (the lowest priority) and 6 (the highest priority). | 1.3.6.1.4.1.171.11.69.2.2.6.3.1.2 | INTEGER (0..7) | read-write | current |
| swL2QOS8021pDefaultPriorityTable OBJECT-TYPE . | 1.3.6.1.4.1.171.11.69.2.2.6.4 | not-accessible | current | |
| swL2QOS8021pDefaultPriorityEntry OBJECT-TYPE A list of information contained in swL2QOS8021pDefaultPriorityTable. | 1.3.6.1.4.1.171.11.69.2.2.6.4.1 | not-accessible | current | |
| swL2QOS8021pDefaultPriorityIndex OBJECT-TYPE Indicates the port number. | 1.3.6.1.4.1.171.11.69.2.2.6.4.1.1 | INTEGER (1..650) | read-only | current |
| swL2QOS8021pDefaultPriority OBJECT-TYPE The priority value to assign to untagged packets received by the switch ports on the switch. | 1.3.6.1.4.1.171.11.69.2.2.6.4.1.2 | INTEGER (0..7) | read-write | current |
| swL2QOS8021pRadiusPriority OBJECT-TYPE Indicates the value of 802.1p comes from RADIUS server. If an 802.1X port is authenticated, this value will overwrite the local configured value. | 1.3.6.1.4.1.171.11.69.2.2.6.4.1.3 | INTEGER | read-only | current |
| swL2TrunkMgmt OBJECT-IDENTITY | 1.3.6.1.4.1.171.11.69.2.2.8 | |||
| swL2TrunkMaxSupportedEntries OBJECT-TYPE Maximum number of entries in the trunk configuration table (swL2TrunkCtrlTable). | 1.3.6.1.4.1.171.11.69.2.2.8.1 | INTEGER (0..65535) | read-only | current |
| swL2TrunkCurrentNumEntries OBJECT-TYPE Current active number of entries in the trunk configuration table. | 1.3.6.1.4.1.171.11.69.2.2.8.2 | INTEGER (0..65535) | read-only | current |
| swL2TrunkCtrlTable OBJECT-TYPE This table specifies which ports are grouped as a set of ports(up to 8) into a single logical link. | 1.3.6.1.4.1.171.11.69.2.2.8.3 | not-accessible | current | |
| swL2TrunkCtrlEntry OBJECT-TYPE A list of information specifies which ports are grouped as a set of ports(up to 8) into a single logical link. | 1.3.6.1.4.1.171.11.69.2.2.8.3.1 | not-accessible | current | |
| swL2TrunkIndex OBJECT-TYPE The index of logical port trunk. The trunk group number depends on the existence of the unit and module. | 1.3.6.1.4.1.171.11.69.2.2.8.3.1.1 | INTEGER (0..65535) | read-only | current |
| swL2TrunkName OBJECT-TYPE The name of logical port trunk. | 1.3.6.1.4.1.171.11.69.2.2.8.3.1.2 | DisplayString (SIZE(0..12)) | read-create | current |
| swL2TrunkMasterPort OBJECT-TYPE The object indicates the master port number of the port trunk entry. When using Port Trunk, you can not configure the other ports of the group except the master port. Their configuration must be the same as the master port (e.g. speed, duplex, enabled/disabled, flow control, and so on). | 1.3.6.1.4.1.171.11.69.2.2.8.3.1.3 | INTEGER (1..65535) | read-create | current |
| swL2TrunkMember OBJECT-TYPE Indicates how many ports are included in this Trunk. The trunk port number depends on the existence of module. The maximum number of ports is 8 for one trunks. | 1.3.6.1.4.1.171.11.69.2.2.8.3.1.4 | PortList | read-create | current |
| swL2TrunkFloodingPort OBJECT-TYPE The object indicates the flooding port number of the port trunk entry. The first port of the trunk is implicitly configured to be the flooding port. | 1.3.6.1.4.1.171.11.69.2.2.8.3.1.5 | INTEGER (1..65535) | read-only | current |
| swL2TrunkType OBJECT-TYPE This object indicates the type of the trunk group. static : is static trunk group lacp : is LACP trunk group . | 1.3.6.1.4.1.171.11.69.2.2.8.3.1.6 | INTEGER {other(1), static(2), lacp(3)} | read-create | current |
| swL2TrunkState OBJECT-TYPE This object indicates the status of this entry. | 1.3.6.1.4.1.171.11.69.2.2.8.3.1.7 | RowStatus | read-create | current |
| swL2TrunkAlgorithm OBJECT-TYPE This object configures the part of the packet examined by the switch when selecting the egress port for transmitting load-sharing data. | 1.3.6.1.4.1.171.11.69.2.2.8.4 | INTEGER {other(1), mac-source(2), mac-destination(3), mac-source-dest(4), ip-source(5), ip-destination(6), ip-source-dest(7)} | read-write | current |
| swL2MirrorMgmt OBJECT-IDENTITY | 1.3.6.1.4.1.171.11.69.2.2.9 | |||
| swL2MirrorLogicTargetPort OBJECT-TYPE This object indicates which port will sniff another port to the switch. A trunk port member cannot be configured as a target Snooping port. The port number is the sequential (logical) number which is also applied to bridge MIB, etc. | 1.3.6.1.4.1.171.11.69.2.2.9.1 | INTEGER (0..65535) | read-write | current |
| swL2MirrorPortSourceIngress OBJECT-TYPE This represents the ingress of the source port packet to be sniffed. | 1.3.6.1.4.1.171.11.69.2.2.9.2 | PortList | read-write | current |
| swL2MirrorPortSourceEgress OBJECT-TYPE This represents the egress of the source port packet to be sniffed. | 1.3.6.1.4.1.171.11.69.2.2.9.3 | PortList | read-write | current |
| swL2MirrorPortState OBJECT-TYPE This object indicates the port mirroring state. other(1) - this entry is currently in use but the conditions under which it will remain so are different for each of the following values. disabled(2) - writing this value to the object will remove the corresponding entry from the table. enabled(3) - this entry will reside in the table. | 1.3.6.1.4.1.171.11.69.2.2.9.4 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | current |
| swL2IGMPMgmt OBJECT-IDENTITY | 1.3.6.1.4.1.171.11.69.2.2.10 | |||
| swL2IGMPMaxSupportedVlans OBJECT-TYPE Maximum number of VLANs in the layer 2 IGMP control table (swL2IGMPCtrlTable). | 1.3.6.1.4.1.171.11.69.2.2.10.1 | INTEGER (0..65535) | read-only | current |
| swL2IGMPCtrlTable OBJECT-TYPE This table controls the VLAN's IGMP function. Its scale depends on the current VLAN state (swL2VlanInfoStatus). If VLAN is in disabled mode, there is only one entry in the table, with index 1. If VLAN is in Port-Base or 802.1q mode, the number of entries can be up to 12, with an index range from 1 to 12. | 1.3.6.1.4.1.171.11.69.2.2.10.3 | not-accessible | current | |
| swL2IGMPCtrlEntry OBJECT-TYPE The entry in IGMP control table (swL2IGMPCtrlTable). The entry is effective only when IGMP capture switch (swL2DevCtrlIGMPSnooping) is enabled. | 1.3.6.1.4.1.171.11.69.2.2.10.3.1 | not-accessible | current | |
| swL2IGMPCtrlVid OBJECT-TYPE This object indicates the IGMP control entry's VLAN ID. If VLAN is disabled, the VID is always 0 and cannot be changed by management users. If VLAN is in Port-Base mode, the VID is arranged from 1 to 12, fixed form. If VLAN is in 802.1q mode, the VID setting can vary from 1 to 4094 by management user, and the Vid in each entry must be unique in the IGMP Control Table. | 1.3.6.1.4.1.171.11.69.2.2.10.3.1.1 | INTEGER (0..65535) | read-only | current |
| swL2IGMPQueryInterval OBJECT-TYPE The frequency at which the IGMP Host-Query packets are transmitted on this switch. | 1.3.6.1.4.1.171.11.69.2.2.10.3.1.2 | INTEGER (1..65535) | read-write | current |
| swL2IGMPMaxResponseTime OBJECT-TYPE The maximum query response time on this switch. | 1.3.6.1.4.1.171.11.69.2.2.10.3.1.3 | INTEGER (1..25) | read-write | current |
| swL2IGMPRobustness OBJECT-TYPE The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to have a high loss, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses. | 1.3.6.1.4.1.171.11.69.2.2.10.3.1.4 | INTEGER (1..255) | read-write | current |
| swL2IGMPLastMemberQueryInterval OBJECT-TYPE The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages. | 1.3.6.1.4.1.171.11.69.2.2.10.3.1.5 | INTEGER (1..25) | read-write | current |
| swL2IGMPHostTimeout OBJECT-TYPE The timer value for sending IGMP query packet when none was sent by the host in the LAN. The timer works in per-VLAN basis. Our device will be activated to send the query message if the timer has expired. Please reference RFC2236-1997. | 1.3.6.1.4.1.171.11.69.2.2.10.3.1.6 | INTEGER (1..16711450) | read-write | current |
| swL2IGMPRouteTimeout OBJECT-TYPE The Router Timeout is how long a host must wait after hearing a Query before it may send any IGMPv2 messages. | 1.3.6.1.4.1.171.11.69.2.2.10.3.1.7 | INTEGER (1..16711450) | read-write | current |
| swL2IGMPLeaveTimer OBJECT-TYPE When a query receives a Leave Group message for a group that has group members on the reception interface, it sends Group-Specific Queries every swL2IGMPLeaveTimer to the group being left. | 1.3.6.1.4.1.171.11.69.2.2.10.3.1.8 | INTEGER (0..16711450) | read-write | current |
| swL2IGMPQueryState OBJECT-TYPE This object decides if the IGMP query is enabled or disabled. | 1.3.6.1.4.1.171.11.69.2.2.10.3.1.9 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | current |
| swL2IGMPCurrentState OBJECT-TYPE This object indicates the current IGMP query state. | 1.3.6.1.4.1.171.11.69.2.2.10.3.1.10 | INTEGER {other(1), querier(2), non-querier(3)} | read-only | current |
| swL2IGMPCtrlState OBJECT-TYPE This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different for each of the following values. disable(2) - IGMP funtion is disabled for this entry. enable(3) - IGMP funtion is enabled for this entry. | 1.3.6.1.4.1.171.11.69.2.2.10.3.1.11 | INTEGER {other(1), disable(2), enable(3)} | read-write | current |
| swL2IGMPFastLeaveState OBJECT-TYPE This object indicates the fast_leave status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disable(2) - IGMP fast-leave funtion is disabled for this entry. enable(3) - IGMP fast-leave funtion is enabled for this entry. | 1.3.6.1.4.1.171.11.69.2.2.10.3.1.12 | INTEGER {other(1), disable(2), enable(3)} | read-write | current |
| swL2IGMPQueryInfoTable OBJECT-TYPE The table contains the current number of IGMP query packets which have been captured by this device, as well as the IGMP query packets sent by the device. | 1.3.6.1.4.1.171.11.69.2.2.10.4 | not-accessible | current | |
| swL2IGMPQueryInfoEntry OBJECT-TYPE Information about current IGMP query information, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN entires are all enabled. | 1.3.6.1.4.1.171.11.69.2.2.10.4.1 | not-accessible | current | |
| swL2IGMPInfoVid OBJECT-TYPE This object indicates the VID of the associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of the IGMP control table (swL2IGMPCtrlTable). | 1.3.6.1.4.1.171.11.69.2.2.10.4.1.1 | INTEGER (0..65535) | read-only | current |
| swL2IGMPInfoQueryCount OBJECT-TYPE This object indicates the number of query packets received since the IGMP function has been enabled, on a per-VLAN basis. | 1.3.6.1.4.1.171.11.69.2.2.10.4.1.2 | INTEGER (0..65535) | read-only | current |
| swL2IGMPInfoTxQueryCount OBJECT-TYPE This object indicates the send count of IGMP query messages, on a per-VLAN basis. In case of the IGMP timer expiration, the switch sends IGMP query packets to related VLAN member ports and increments this object by 1. | 1.3.6.1.4.1.171.11.69.2.2.10.4.1.3 | INTEGER (0..65535) | read-only | current |
| swL2IGMPInfoTable OBJECT-TYPE The table containing current IGMP information which have been captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entries are all enabled. Note that the priority of IGMP table entries is lower than the Filtering Table, i.e. if there is a table hash collision between the entries of the IGMP Table and the Filtering Table inside the switch H/W address table, the Filtering Table entry will overwrite the colliding entry of the IGMP Table. See swL2FilterMgmt description also. | 1.3.6.1.4.1.171.11.69.2.2.10.5 | not-accessible | current | |
| swL2IGMPInfoEntry OBJECT-TYPE Information about current IGMP information which was captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entries are all enabled. | 1.3.6.1.4.1.171.11.69.2.2.10.5.1 | not-accessible | current | |
| swL2IGMPVid OBJECT-TYPE This object indicates the VID of individual IGMP table entries. It shows the VID of IGMP report information captured on the network. | 1.3.6.1.4.1.171.11.69.2.2.10.5.1.1 | INTEGER (0..65535) | read-only | current |
| swL2IGMPGroupIpAddr OBJECT-TYPE This object identifies group ip address which have been captured from the IGMP packet, on a per-Vlan basis. | 1.3.6.1.4.1.171.11.69.2.2.10.5.1.2 | IpAddress | read-only | current |
| swL2IGMPMacAddr OBJECT-TYPE This object identifies mac addresses which correspond to swL2IGMPGroupIpAddr, on a per-Vlan basis. | 1.3.6.1.4.1.171.11.69.2.2.10.5.1.3 | MacAddress | read-only | current |
| swL2IGMPPortMap OBJECT-TYPE This object indicates which ports belong to the same multicast group, on a per-Vlan basis. Each multicast group has a octect string to indicate with port map. The most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'(Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant). The 4 octets represent one unit port according to its logic port. If the unit has less then 32 port, the other ports don't care and just fill in zero. | 1.3.6.1.4.1.171.11.69.2.2.10.5.1.4 | PortList | read-only | current |
| swL2IGMPIpGroupReportCount OBJECT-TYPE This object indicates how many report packets were received by the device corresponding with this entry where the IGMP function is enabled, on a per-Vlan basis. | 1.3.6.1.4.1.171.11.69.2.2.10.5.1.5 | INTEGER (0..65535) | read-only | current |
| swL2IGMPMulticastVlanTable OBJECT-TYPE The information of the IGMP snooping multicast VLAN table. | 1.3.6.1.4.1.171.11.69.2.2.10.6 | not-accessible | current | |
| swL2IGMPMulticastVlanEntry OBJECT-TYPE The entry of swL2IGMPMulticastVlanTable. | 1.3.6.1.4.1.171.11.69.2.2.10.6.1 | not-accessible | current | |
| swL2IGMPMulticastVlanid OBJECT-TYPE This object indicates the VLAN id of the IGMP snooping multicast VLAN entry. | 1.3.6.1.4.1.171.11.69.2.2.10.6.1.1 | INTEGER (2..4094) | read-only | current |
| swL2IGMPMulticastVlanName OBJECT-TYPE This object indicates the VLAN name of the IGMP snooping multicast VLAN entry. | 1.3.6.1.4.1.171.11.69.2.2.10.6.1.2 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| swL2IGMPMulticastVlanSourcePort OBJECT-TYPE This object indicates the portlist of the source ports of IGMP snooping multicast VLAN. The source ports will be set as tag ports of the VLAN entry and the IGMP control messages received from the member ports would be forwarded to the source ports. | 1.3.6.1.4.1.171.11.69.2.2.10.6.1.3 | PortList | read-create | current |
| swL2IGMPMulticastVlanMemberPort OBJECT-TYPE This object indicates the portlist of the member ports of IGMP snooping multicast VLAN. The source ports will be set to untag ports of the vlan entry and the IGMP control messages received from the member ports would be forwarded to the source ports. | 1.3.6.1.4.1.171.11.69.2.2.10.6.1.4 | PortList | read-create | current |
| swL2IGMPMulticastVlanRowStatus OBJECT-TYPE This object indicates the status of this entry. | 1.3.6.1.4.1.171.11.69.2.2.10.6.1.5 | RowStatus | read-create | current |
| swL2IGMPRouterPortTable OBJECT-TYPE The information of the router port table. | 1.3.6.1.4.1.171.11.69.2.2.10.7 | not-accessible | current | |
| swL2IGMPRouterPortEntry OBJECT-TYPE The entry of swL2IGMPRouterPortTable. | 1.3.6.1.4.1.171.11.69.2.2.10.7.1 | not-accessible | current | |
| swL2IGMPRouterPortVlanid OBJECT-TYPE This object indicates the VLAN id of the router port entry. | 1.3.6.1.4.1.171.11.69.2.2.10.7.1.1 | INTEGER (1..4094) | read-only | current |
| swL2IGMPRouterPortVlanName OBJECT-TYPE This object indicates the VLAN name of the router port entry. | 1.3.6.1.4.1.171.11.69.2.2.10.7.1.2 | SnmpAdminString (SIZE(0..32)) | read-only | current |
| swL2IGMPRouterPortStaticPortList OBJECT-TYPE This object indicates the static portlist of the router port entry. | 1.3.6.1.4.1.171.11.69.2.2.10.7.1.3 | PortList | read-write | current |
| swL2IGMPRouterPortDynamicPortList OBJECT-TYPE This object indicates the dynamic portlist of the router port entry. | 1.3.6.1.4.1.171.11.69.2.2.10.7.1.4 | PortList | read-only | current |
| swL2IGMPRouterPortForbiddenPortList OBJECT-TYPE This object indicates the forbidden portlist of the router port entry. | 1.3.6.1.4.1.171.11.69.2.2.10.7.1.5 | PortList | read-write | current |
| swL2TrafficSegMgmt OBJECT-IDENTITY | 1.3.6.1.4.1.171.11.69.2.2.13 | |||
| swL2TrafficSegTable OBJECT-TYPE This table specifies that the port can just forward traffic to the specific port list. | 1.3.6.1.4.1.171.11.69.2.2.13.1 | not-accessible | current | |
| swL2TrafficSegEntry OBJECT-TYPE A list of information specifying the port with its traffic forward list. | 1.3.6.1.4.1.171.11.69.2.2.13.1.1 | not-accessible | current | |
| swL2TrafficSegPort OBJECT-TYPE The port number of the logical port. | 1.3.6.1.4.1.171.11.69.2.2.13.1.1.1 | INTEGER (0..65535) | read-only | current |
| swL2TrafficSegForwardPorts OBJECT-TYPE The port list that the specific port can forward traffic to. | 1.3.6.1.4.1.171.11.69.2.2.13.1.1.2 | PortList | read-write | current |
| swL2BroadcastSegCtrl OBJECT-IDENTITY | 1.3.6.1.4.1.171.11.69.2.2.13.2 | |||
| swL2BroadcastSegFilterPorts OBJECT-TYPE The port list that the specific port can filter broadcast packets from. | 1.3.6.1.4.1.171.11.69.2.2.13.2.1 | PortList | read-write | current |
| swL2BroadcastSegARPForwardPorts OBJECT-TYPE The port list that the specific port can forward broadcast ARP packets to. | 1.3.6.1.4.1.171.11.69.2.2.13.2.2 | PortList | read-write | current |
| swL2PortSecurityMgmt OBJECT-IDENTITY | 1.3.6.1.4.1.171.11.69.2.2.14 | |||
| swL2PortSecurityControlTable OBJECT-TYPE The port security feature controls the address learning capability and the traffic forwarding decision. Each port can have this function enabled or disabled. When it is enabled and a number is given said N, which allows N addresses to be learned at this port, the first N learned addresses are locked at this port as a static entry. When the learned addresses number reaches N, any incoming packet that has not learned a source address is discarded (e.g. dropped) and no more new addresses can be learned on this port. | 1.3.6.1.4.1.171.11.69.2.2.14.1 | not-accessible | current | |
| swL2PortSecurityControlEntry OBJECT-TYPE A list of information contained in the swL2PortSecurityControlTable. | 1.3.6.1.4.1.171.11.69.2.2.14.1.1 | not-accessible | current | |
| swL2PortSecurityPortIndex OBJECT-TYPE Indicates the secured port to lock address learning. | 1.3.6.1.4.1.171.11.69.2.2.14.1.1.1 | INTEGER (1..255) | read-only | current |
| swL2PortSecurityMaxLernAddr OBJECT-TYPE Indicates allowable number of addresses to be learned at this port. | 1.3.6.1.4.1.171.11.69.2.2.14.1.1.2 | INTEGER (0..65535) | read-write | current |
| swL2PortSecurityMode OBJECT-TYPE Indicates the mode of locking address. In deleteOnTimeout (3) mode, the locked addresses can be aged out after the aging timer has expired. In this mode, when the locked address has aged out, the number of addresses that can be learned has to increase by one. In deleteOnReset (4) mode, the locked addresses are not aged out unless the system is restarted. This is to prevent port movement or intrusion. | 1.3.6.1.4.1.171.11.69.2.2.14.1.1.3 | INTEGER {other(1), permanent(2), deleteOnTimeout(3), deleteOnReset(4)} | read-write | current |
| swL2PortSecurityAdmState OBJECT-TYPE Indicates the administration state of the locking address. | 1.3.6.1.4.1.171.11.69.2.2.14.1.1.4 | INTEGER {other(1), enable(2), disable(3)} | read-write | current |
| swL2PortSecurityTrapLogState OBJECT-TYPE When enable (2) is selected, whenever there's a new MAC that violates the pre-defined port security configuration, a trap will be sent out and the relevant information will be logged by the system. | 1.3.6.1.4.1.171.11.69.2.2.14.2 | INTEGER {other(1), enable(2), disable(3)} | read-write | current |
| swL2MgmtMIBTraps OBJECT-IDENTITY | 1.3.6.1.4.1.171.11.69.2.2.15 | |||
| swL2MgmtMIBTrapPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.171.11.69.2.2.15.0 | |||
| swl2NotificationBidings OBJECT-IDENTITY | 1.3.6.1.4.1.171.11.69.2.2.15.1 | |||
| swL2macNotifyInfo OBJECT-TYPE This object indicates information about the last time the system rebooted. | 1.3.6.1.4.1.171.11.69.2.2.15.1.1 | OCTET STRING (SIZE(0..1024)) | read-only | current |
| swl2NotifyPortSecurity OBJECT-IDENTITY | 1.3.6.1.4.1.171.11.69.2.2.15.2 | |||
| swL2PortSecurityViolationMac OBJECT-TYPE This object indicates the MAC address that violated the port security configuration. | 1.3.6.1.4.1.171.11.69.2.2.15.2.1 | MacAddress | accessible-for-notify | current |
Notifications
| Name | OID | Status |
|---|---|---|
| swL2macNotification NOTIFICATION-TYPE This trap indicate the MAC addresses variation in the address table . | 1.3.6.1.4.1.171.11.69.2.2.15.0.3 | current |
| swL2porttypechgNotification NOTIFICATION-TYPE This trap indicates the port type change. | 1.3.6.1.4.1.171.11.69.2.2.15.0.4 | current |
| swPowerStatusChg NOTIFICATION-TYPE Power Status change notification. | 1.3.6.1.4.1.171.11.69.2.2.15.0.5 | current |
| swPowerFailure NOTIFICATION-TYPE Power Failure notification. | 1.3.6.1.4.1.171.11.69.2.2.15.0.6 | current |
| swPowerRecover NOTIFICATION-TYPE Power Recover notification. | 1.3.6.1.4.1.171.11.69.2.2.15.0.7 | current |
| swL2PortSecurityViolationTrap NOTIFICATION-TYPE When the port_security trap is enabled, if there's a new MAC that violates the pre-defined port security configuration, a trap will be sent out | 1.3.6.1.4.1.171.11.69.2.2.15.2.2 | current |