MIBs Depot

DES3550-L2MGMT-MIB

Registered at
1.3.6.1.4.1.171.11.64.2.2
Last updated
1900-07-15 00:00
Organization
enterprise, Inc.
Namespace
dlink
Source file
DES3550-L2MGMT-MIB
Digest
sha256:c9c949c26856b184f1cf4c8fb4ebaf3db21a12e9e105730b6d9e7a186bac2395

Description

The Structure of Layer 2 Network Management Information for the proprietary enterprise.

Contact

Customer Service Postal: Tel: E-mail:

Imports

FromSymbols
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Counter64, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION
SW3500PRIMGMT-MIBdes3550

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

DES3550-L2MGMT-MIB
DLINK-ID-REC-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC
SW3500PRIMGMT-MIB

Textual conventions

NameOIDSyntaxAccessStatus
PortList
type
VlanId
type
VlanIndex
type

Objects

NameOIDSyntaxAccessStatus
swL2DevMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.64.2.2.1
swL2DevInfo
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.64.2.2.1.1
swDevInfoSystemUpTime
OBJECT-TYPE
The value of sysUpTime at the time the switch entered its current operational state. If the current state was entered prior to the last re-initialization, then this object contains a zero value. This value is in units of seconds.
1.3.6.1.4.1.171.11.64.2.2.1.1.1TimeTicksread-onlycurrent
swDevInfoTotalNumOfPort
OBJECT-TYPE
The number of ports within this switch. This value is the sum of the ports within this switch.
1.3.6.1.4.1.171.11.64.2.2.1.1.2INTEGER (0..65535)read-onlycurrent
swDevInfoNumOfPortInUse
OBJECT-TYPE
The number of ports in this switch connected to the segment or the end stations.
1.3.6.1.4.1.171.11.64.2.2.1.1.3INTEGER (0..65535)read-onlycurrent
swDevInfoConsoleInUse
OBJECT-TYPE
This usage indication of console system.
1.3.6.1.4.1.171.11.64.2.2.1.1.4INTEGER {other(1), in-use(2), not-in-use(3)}read-onlycurrent
swDevInfoModuleType
OBJECT-TYPE
This object indicates the module type of this port.
1.3.6.1.4.1.171.11.64.2.2.1.1.5OCTET STRINGread-onlycurrent
swDevInfoPowerTable
OBJECT-TYPE
A list of temperature.
1.3.6.1.4.1.171.11.64.2.2.1.1.8not-accessiblecurrent
swDevInfoPowerEntry
OBJECT-TYPE
A entry of Power information.
1.3.6.1.4.1.171.11.64.2.2.1.1.8.1not-accessiblecurrent
swDevInfoPowerUnitIndex
OBJECT-TYPE
Indicates ID of the unit in the System
1.3.6.1.4.1.171.11.64.2.2.1.1.8.1.1INTEGER (0..65535)read-onlycurrent
swDevInfoPowerID
OBJECT-TYPE
Indicates ID of the power
1.3.6.1.4.1.171.11.64.2.2.1.1.8.1.2INTEGER (0..65535)read-onlycurrent
swDevInfoPowerStatus
OBJECT-TYPE
Indicates status of the power
1.3.6.1.4.1.171.11.64.2.2.1.1.8.1.3INTEGER {other(0), lowVoltage(1), overCurrent(2), working(3), fail(4), connect(5), disconnect(6)}read-onlycurrent
swL2DevCtrl
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.64.2.2.1.2
swL2DevCtrlStpState
OBJECT-TYPE
This object can be enabled or disabled spanning tree algorithm during runtime of the system.
1.3.6.1.4.1.171.11.64.2.2.1.2.1INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2DevCtrlIGMPSnooping
OBJECT-TYPE
This object indicates layer 2 Internet Group Management Protocol (IGMP) capture function is enabled or disabled.
1.3.6.1.4.1.171.11.64.2.2.1.2.2INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2DevCtrlRmonState
OBJECT-TYPE
This object can be enabled or disabled RMON.
1.3.6.1.4.1.171.11.64.2.2.1.2.3INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2DevCtrlCleanAllStatisticCounter
OBJECT-TYPE
As the object is set to active, all the statistic counters will be cleared. If set to normal, do nothing.
1.3.6.1.4.1.171.11.64.2.2.1.2.8INTEGER {normal(1), active(2)}read-writecurrent
swL2DevCtrlVlanIdOfFDBTbl
OBJECT-TYPE
Indicates the VLAN ID which the Dot1dTpFdbTable belongs to ; The default value is DEFAULT_VLAN_ID of system .
1.3.6.1.4.1.171.11.64.2.2.1.2.9VlanIdread-writecurrent
swL2MACNotifyState
OBJECT-TYPE
This object can enabled or disabled MAC Notification.
1.3.6.1.4.1.171.11.64.2.2.1.2.10INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2MACNotifyHistorySize
OBJECT-TYPE
This object indicates the history size of variation MAC in address table. The default value is 1 .
1.3.6.1.4.1.171.11.64.2.2.1.2.11INTEGER (1..500)read-writecurrent
swL2MACNotifyInterval
OBJECT-TYPE
This object indicates the time interval in second for trigger the MAC notify message.
1.3.6.1.4.1.171.11.64.2.2.1.2.12INTEGER (1..2147483647)read-writecurrent
swL2DevCtrlAsymVlanState
OBJECT-TYPE
This object can enabl or disabl asymmetric vlan during runtime of the system.
1.3.6.1.4.1.171.11.64.2.2.1.2.13INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2DevCtrlManagementVlanId
OBJECT-TYPE
This object controls which Vlan includes system ip. And the Vlan should have been created.
1.3.6.1.4.1.171.11.64.2.2.1.2.14VlanIdread-writecurrent
swL2DevAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.64.2.2.1.3
swL2DevAlarmNewRoot
OBJECT-TYPE
When the device has become the new root of the Spanning Tree, this object decide whether to send a new root trap.
1.3.6.1.4.1.171.11.64.2.2.1.3.1INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2DevAlarmTopologyChange
OBJECT-TYPE
This object determine to send a trap or not when the switch topology was changed. If the object is enabled(3), the topologyChange trap is sent by the device when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. For the same port tranition, the device doesn't send the trap if this object value is disabled or other.
1.3.6.1.4.1.171.11.64.2.2.1.3.2INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2DevAlarmLinkChange
OBJECT-TYPE
This object determine to send a trap or not when the link was changed. If the object is enabled(3), the Link Change trap is sent by the device when any of its ports link change. The device doesn't send the trap if this object value is disabled or other.
1.3.6.1.4.1.171.11.64.2.2.1.3.3INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2VlanMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.64.2.2.3
swL2VlanAdvertisementTable
OBJECT-TYPE
A table containing advertisement state for each VLAN configured into the device by (local or network) management.
1.3.6.1.4.1.171.11.64.2.2.3.1not-accessiblecurrent
swL2VlanAdvertisementEntry
OBJECT-TYPE
Advertisement state for each VLAN configured into the device.
1.3.6.1.4.1.171.11.64.2.2.3.1.1not-accessiblecurrent
swL2VlanIndex
OBJECT-TYPE
The VLAN-ID or other identifier refering to this VLAN.
1.3.6.1.4.1.171.11.64.2.2.3.1.1.1INTEGER (1..4094)read-onlycurrent
swL2VlanName
OBJECT-TYPE
An administratively assigned string, which may be used to identify the VLAN.
1.3.6.1.4.1.171.11.64.2.2.3.1.1.2DisplayString (SIZE(0..32))read-onlycurrent
swL2VlanAdvertiseState
OBJECT-TYPE
This object indicates the advertise status of this vlan entry.
1.3.6.1.4.1.171.11.64.2.2.3.1.1.3INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2PortMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.64.2.2.4
swL2PortInfoTable
OBJECT-TYPE
A table that contains information about every port.
1.3.6.1.4.1.171.11.64.2.2.4.1not-accessiblecurrent
swL2PortInfoEntry
OBJECT-TYPE
A list of information for each port of the device.
1.3.6.1.4.1.171.11.64.2.2.4.1.1not-accessiblecurrent
swL2PortInfoPortIndex
OBJECT-TYPE
This object indicates the module's port number.(1..Max port number in the module)
1.3.6.1.4.1.171.11.64.2.2.4.1.1.1INTEGER (0..65535)read-onlycurrent
swL2PortInfoUnitIndex
OBJECT-TYPE
Indicates ID of the unit in the device
1.3.6.1.4.1.171.11.64.2.2.4.1.1.2INTEGER (0..65535)read-onlycurrent
swL2PortInfoType
OBJECT-TYPE
This object indicates the connector type of this port.
1.3.6.1.4.1.171.11.64.2.2.4.1.1.3INTEGER {portType-100Base-TX(1), portType-100Base-FX(2), portType-100Base-FL(3), portType-1000Base-TX(4), portType-1000Base-SX(5), portType-1000Base-LX(6), portType-1000Base-SX-GBIC(7), portType-1000Base-LX-GBIC(8), portType-1000Base-TX-GBIC(9), portType-1000Base-1394(10), none(11)}read-onlycurrent
swL2PortInfoLinkStatus
OBJECT-TYPE
This object indicates the port link status.
1.3.6.1.4.1.171.11.64.2.2.4.1.1.4INTEGER {other(1), link-pass(2), link-fail(3)}read-onlycurrent
swL2PortInfoNwayStatus
OBJECT-TYPE
This object indicates the port speed and duplex mode.
1.3.6.1.4.1.171.11.64.2.2.4.1.1.5INTEGER {other(1), auto(2), half-10Mbps(3), full-10Mbps(4), half-100Mbps(5), full-100Mbps(6), half-1Gigabps(7), full-1Gigabps(8)}read-onlycurrent
swL2PortInfoModuleType
OBJECT-TYPE
This object indicates the module type of this port.
1.3.6.1.4.1.171.11.64.2.2.4.1.1.6INTEGER {none(0), moduleType-COMBO(1), moduleType-1394(2), moduleType-1000T(3), moduleType-MGBIC(4), moduleType-1P-SC-SX(5), moduleType-2P-SC-SX(6), moduleType-1P-SC-LX(7), moduleType-2P-SC-LX(8), moduleType-1P-TX(9), moduleType-2P-TX(10), moduleType-1P-MTRJ-SX(11), moduleType-2P-MTRJ-SX(12), moduleType-1P-MTRJ-LX(13), moduleType-2P-MTRJ-LX(14), moduleType-1P-GBIC(15), moduleType-2P-GBIC(16), moduleType-1P-GBIC-1P-TX(17), moduleType-1P-GBIC-1P-STACK(18), moduleType-2P-STACK(19), moduleType-2P-100FX(20), moduleType-1P-100FX(21), moduleType-2P-100FX-NEW(22), moduleType-1P-100FL(23), moduleType-2P-100FL(24), moduleType-2P-100TX(25), moduleType-BaseModule-24PORT(26)}read-onlycurrent
swL2PortInfoErrorDisabled
OBJECT-TYPE
This object indicates the blocking type of this port.
1.3.6.1.4.1.171.11.64.2.2.4.1.1.7INTEGER {none(0), storm(1), lbd(2), unknow(3)}read-onlycurrent
swL2PortCtrlTable
OBJECT-TYPE
A table that contains control information about every port.
1.3.6.1.4.1.171.11.64.2.2.4.2not-accessiblecurrent
swL2PortCtrlEntry
OBJECT-TYPE
A list of control information for each port of the device.
1.3.6.1.4.1.171.11.64.2.2.4.2.1not-accessiblecurrent
swL2PortCtrlPortIndex
OBJECT-TYPE
This object indicates the module's port number.(1..Max port number in the module)
1.3.6.1.4.1.171.11.64.2.2.4.2.1.1INTEGER (0..65535)read-onlycurrent
swL2PortCtrlUnitIndex
OBJECT-TYPE
Indicates ID of the unit in the device
1.3.6.1.4.1.171.11.64.2.2.4.2.1.2INTEGER (0..65535)read-onlycurrent
swL2PortCtrlAdminState
OBJECT-TYPE
This object decide the port enabled or disabled.
1.3.6.1.4.1.171.11.64.2.2.4.2.1.3INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2PortCtrlNwayState
OBJECT-TYPE
Chose the port speed, duplex mode, and N-Way function mode.
1.3.6.1.4.1.171.11.64.2.2.4.2.1.4INTEGER {other(1), nway-enabled(2), nway-disabled-10Mbps-Half(3), nway-disabled-10Mbps-Full(4), nway-disabled-100Mbps-Half(5), nway-disabled-100Mbps-Full(6), nway-disabled-1Gigabps-Half(7), nway-disabled-1Gigabps-Full(8)}read-writecurrent
swL2PortCtrlFlowCtrlState
OBJECT-TYPE
The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mode, IEEE 802.3x flow control function sends PAUSE frames and receives PAUSE frames.
1.3.6.1.4.1.171.11.64.2.2.4.2.1.5INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2PortCtrlLockState
OBJECT-TYPE
This object decide the port is locked or not.
1.3.6.1.4.1.171.11.64.2.2.4.2.1.6INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2PortCtrlMACNotifyState
OBJECT-TYPE
This object decide the MAC notification is enable not.
1.3.6.1.4.1.171.11.64.2.2.4.2.1.7INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2PortCtrlMulticastfilter
OBJECT-TYPE
This object decide the multicast packets filtering mode on this port .
1.3.6.1.4.1.171.11.64.2.2.4.2.1.8INTEGER {other(0), forward-all-groups(1), forward-unregistered-groups(2), filter-unregistered-groups(3)}read-writecurrent
swL2LimitedMulticastMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.64.2.2.5
swL2MulticastRangeTable
OBJECT-TYPE
.
1.3.6.1.4.1.171.11.64.2.2.5.1not-accessiblecurrent
swL2MulticastRangeEntry
OBJECT-TYPE
A list of information contained in swL2MulticastRangeTable.
1.3.6.1.4.1.171.11.64.2.2.5.1.1not-accessiblecurrent
swL2MulticastRangeName
OBJECT-TYPE
This object specifies multicast range name.
1.3.6.1.4.1.171.11.64.2.2.5.1.1.1DisplayStringread-onlycurrent
swL2MulticastRangeFromIp
OBJECT-TYPE
This object specifies begin IP address for this range.
1.3.6.1.4.1.171.11.64.2.2.5.1.1.2IpAddressread-createcurrent
swL2MulticastRangeToIp
OBJECT-TYPE
This object specifies end IP address for this range.
1.3.6.1.4.1.171.11.64.2.2.5.1.1.3IpAddressread-createcurrent
swL2MulticastRangeRowStatus
OBJECT-TYPE
This object indicates the status of this entry.
1.3.6.1.4.1.171.11.64.2.2.5.1.1.4RowStatusread-createcurrent
swL2LimitedMulticastPortInfo
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.64.2.2.5.2
swL2LimitedMulticastStatusTable
OBJECT-TYPE
.
1.3.6.1.4.1.171.11.64.2.2.5.2.1not-accessiblecurrent
swL2LimitedMulticastStatusEntry
OBJECT-TYPE
A list of information contained in swL2LimitedMulticastStatusTable.
1.3.6.1.4.1.171.11.64.2.2.5.2.1.1not-accessiblecurrent
swL2LimitedMulticastPort
OBJECT-TYPE
This object indicates the port .
1.3.6.1.4.1.171.11.64.2.2.5.2.1.1.1INTEGER (1..65535)read-onlycurrent
swL2LimitedMulticastAccess
OBJECT-TYPE
This object indicates the access type.
1.3.6.1.4.1.171.11.64.2.2.5.2.1.1.2INTEGER {none(1), permit(2), deny(3)}read-writecurrent
swL2LimitedMulticastState
OBJECT-TYPE
This object indicates the state for this port.
1.3.6.1.4.1.171.11.64.2.2.5.2.1.1.3INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2LimitedMulticastRangeTable
OBJECT-TYPE
.
1.3.6.1.4.1.171.11.64.2.2.5.2.2not-accessiblecurrent
swL2LimitedMulticastRangeEntry
OBJECT-TYPE
A list of information contained in swL2LimitedMulticastRangeTable.
1.3.6.1.4.1.171.11.64.2.2.5.2.2.1not-accessiblecurrent
swL2LimitedMulticastID
OBJECT-TYPE
This object indicates the range ID .
1.3.6.1.4.1.171.11.64.2.2.5.2.2.1.1INTEGER (1..65535)read-onlycurrent
swL2LimitedMulticastRangeName
OBJECT-TYPE
1.3.6.1.4.1.171.11.64.2.2.5.2.2.1.2DisplayStringread-createcurrent
swL2LimitedMulticastFromIp
OBJECT-TYPE
This object specifies begin IP address of the range on this port.
1.3.6.1.4.1.171.11.64.2.2.5.2.2.1.3IpAddressread-onlycurrent
swL2LimitedMulticastToIp
OBJECT-TYPE
This object specifies end IP address of the range on this port.
1.3.6.1.4.1.171.11.64.2.2.5.2.2.1.4IpAddressread-onlycurrent
swL2LimitedMulticastRowStatus
OBJECT-TYPE
This object indicates the status of this entry.
1.3.6.1.4.1.171.11.64.2.2.5.2.2.1.5RowStatusread-createcurrent
swL2QOSMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.64.2.2.6
swL2QOSBandwidthControlTable
OBJECT-TYPE
.
1.3.6.1.4.1.171.11.64.2.2.6.1not-accessiblecurrent
swL2QOSBandwidthControlEntry
OBJECT-TYPE
A list of information contained in swL2QOSBandwidthControlTable.
1.3.6.1.4.1.171.11.64.2.2.6.1.1not-accessiblecurrent
swL2QOSBandwidthPortIndex
OBJECT-TYPE
Indicates the port .
1.3.6.1.4.1.171.11.64.2.2.6.1.1.1INTEGER (1..650)read-onlycurrent
swL2QOSBandwidthRxRate
OBJECT-TYPE
Indicates RX Rate(Mbit/sec) of the specifed port. Value 0 means no limit.
1.3.6.1.4.1.171.11.64.2.2.6.1.1.2INTEGER (0..1000)read-writecurrent
swL2QOSBandwidthTxRate
OBJECT-TYPE
Indicates TX Rate(Mbit/sec) of the specifed port. Value 0 means no limit.
1.3.6.1.4.1.171.11.64.2.2.6.1.1.3INTEGER (0..1000)read-writecurrent
swL2QOSSchedulingTable
OBJECT-TYPE
.
1.3.6.1.4.1.171.11.64.2.2.6.2not-accessiblecurrent
swL2QOSSchedulingEntry
OBJECT-TYPE
A list of information contained in swL2QOSSchedulingTable.
1.3.6.1.4.1.171.11.64.2.2.6.2.1not-accessiblecurrent
swL2QOSSchedulingClassIndex
OBJECT-TYPE
Indicates the hardware queue number.
1.3.6.1.4.1.171.11.64.2.2.6.2.1.1INTEGER (0..3)read-onlycurrent
swL2QOSSchedulingMaxPkts
OBJECT-TYPE
Indicates the maximum number of packets the hardware priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its packets. a value between 0 and 255 can be specified.
1.3.6.1.4.1.171.11.64.2.2.6.2.1.2INTEGER (0..255)read-writecurrent
swL2QOSSchedulingMaxLatency
OBJECT-TYPE
Indicates the maximum amount of time the hardware priority queue will be allowed to transmit packets before allowing the next lowest priority queue to begin transmit its packets. A value between 0 and 255 can be specified- with this value multiplied by 16 ms to arrive at the total allowed time for queue to transmit packets. For example, a value of 3 specifies 3*16=48 ms. The queue will continue transmitting the last packet until it is finished when the max_latency timer expires.
1.3.6.1.4.1.171.11.64.2.2.6.2.1.3INTEGER (0..255)read-writecurrent
swL2QOS8021pUserPriorityTable
OBJECT-TYPE
.
1.3.6.1.4.1.171.11.64.2.2.6.3not-accessiblecurrent
swL2QOS8021pUserPriorityEntry
OBJECT-TYPE
A list of information contained in swL2QOS8021pUserPriorityTable.
1.3.6.1.4.1.171.11.64.2.2.6.3.1not-accessiblecurrent
swL2QOS8021pUserPriorityIndex
OBJECT-TYPE
The 802.1p user priority .
1.3.6.1.4.1.171.11.64.2.2.6.3.1.1INTEGER (0..7)read-onlycurrent
swL2QOS8021pUserPriorityClass
OBJECT-TYPE
The number of the switch's hardware priority queue. The switch has four hardware priority queues available. They are numbered between 0 (the lowest priority) and 3 (the highest priority).
1.3.6.1.4.1.171.11.64.2.2.6.3.1.2INTEGER (0..3)read-writecurrent
swL2QOS8021pDefaultPriorityTable
OBJECT-TYPE
.
1.3.6.1.4.1.171.11.64.2.2.6.4not-accessiblecurrent
swL2QOS8021pDefaultPriorityEntry
OBJECT-TYPE
A list of information contained in swL2QOS8021pDefaultPriorityTable.
1.3.6.1.4.1.171.11.64.2.2.6.4.1not-accessiblecurrent
swL2QOS8021pDefaultPriorityIndex
OBJECT-TYPE
Indicates the port number .
1.3.6.1.4.1.171.11.64.2.2.6.4.1.1INTEGER (1..650)read-onlycurrent
swL2QOS8021pDefaultPriority
OBJECT-TYPE
The priority value to assign to untagged packets received by the switch ports on the switch..
1.3.6.1.4.1.171.11.64.2.2.6.4.1.2INTEGER (0..7)read-writecurrent
swL2IpMacBindingMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.64.2.2.7
swL2IpMacBindingPortTable
OBJECT-TYPE
The table specifies port's ip-mac binding function.
1.3.6.1.4.1.171.11.64.2.2.7.1not-accessiblecurrent
swL2IpMacBindingPortEntry
OBJECT-TYPE
A list of information about port's ip-mac binding function.
1.3.6.1.4.1.171.11.64.2.2.7.1.1not-accessiblecurrent
swL2IpMacBindingPortIndex
OBJECT-TYPE
This object indicates the module's port number.(1..Max port number in the module).
1.3.6.1.4.1.171.11.64.2.2.7.1.1.1INTEGER (0..65535)read-onlycurrent
swL2IpMacBindingPortState
OBJECT-TYPE
This object enable\disable the IP-MAC binding on the specified port.
1.3.6.1.4.1.171.11.64.2.2.7.1.1.2INTEGER {other(1), enable(2), disable(3)}read-writecurrent
swL2IpMacBindingPortAllowZeroIp
OBJECT-TYPE
This object enable\disable the allow zero IP status on the specified port.
1.3.6.1.4.1.171.11.64.2.2.7.1.1.3INTEGER {other(1), enable(2), disable(3)}read-writecurrent
swL2IpMacBindingTable
OBJECT-TYPE
This table specifies IP-MAC binding information.
1.3.6.1.4.1.171.11.64.2.2.7.2not-accessiblecurrent
swL2IpMacBindingEntry
OBJECT-TYPE
IP-MAC binding entry used to add\delete\configure the address pair to the switch's authorized user database.
1.3.6.1.4.1.171.11.64.2.2.7.2.1not-accessiblecurrent
swL2IpMacBindingIpIndex
OBJECT-TYPE
The IP address of IP-MAC binding.
1.3.6.1.4.1.171.11.64.2.2.7.2.1.1IpAddressread-onlycurrent
swL2IpMacBindingMac
OBJECT-TYPE
The MAC address of IP-MAC binding.
1.3.6.1.4.1.171.11.64.2.2.7.2.1.2MacAddressread-createcurrent
swL2IpMacBindingStatus
OBJECT-TYPE
The status of this entry.
1.3.6.1.4.1.171.11.64.2.2.7.2.1.3RowStatusread-createcurrent
swL2IpMacBindingPorts
OBJECT-TYPE
The port members of this entry.
1.3.6.1.4.1.171.11.64.2.2.7.2.1.4PortListread-createcurrent
swL2IpMacBindingAction
OBJECT-TYPE
The action of this entry.
1.3.6.1.4.1.171.11.64.2.2.7.2.1.5INTEGER {inactive(0), active(1)}read-onlycurrent
swL2IpMacBindingMode
OBJECT-TYPE
The mode of this entry.
1.3.6.1.4.1.171.11.64.2.2.7.2.1.6INTEGER {arp(0), acl(1)}read-createcurrent
swL2IpMacBindingBlockedTable
OBJECT-TYPE
The table specifies information of MAC address which was blocked.
1.3.6.1.4.1.171.11.64.2.2.7.3not-accessiblecurrent
swL2IpMacBindingBlockedEntry
OBJECT-TYPE
The entry can not create\configure. It can be deleted only.
1.3.6.1.4.1.171.11.64.2.2.7.3.1not-accessiblecurrent
swL2IpMacBindingBlockedVID
OBJECT-TYPE
The object specifies VLAN ID.
1.3.6.1.4.1.171.11.64.2.2.7.3.1.1VlanIndexread-onlycurrent
swL2IpMacBindingBlockedMac
OBJECT-TYPE
The MAC address which was blocked.
1.3.6.1.4.1.171.11.64.2.2.7.3.1.2MacAddressread-onlycurrent
swL2IpMacBindingBlockedVlanName
OBJECT-TYPE
This object specifies VLAN name.
1.3.6.1.4.1.171.11.64.2.2.7.3.1.3DisplayStringread-onlycurrent
swL2IpMacBindingBlockedPort
OBJECT-TYPE
The port with which the MAC is associated.
1.3.6.1.4.1.171.11.64.2.2.7.3.1.4INTEGER (0..65535)read-onlycurrent
swL2IpMacBindingBlockedType
OBJECT-TYPE
The value is always blockByAddrBind. This entry will be delete by setting value delete(3).
1.3.6.1.4.1.171.11.64.2.2.7.3.1.5INTEGER {other(1), blockByAddrBind(2), delete(3)}read-writecurrent
swL2IpMacBindingAllPortState
OBJECT-TYPE
This object enable\disable the IP-MAC binding on the all ports of the system. This object is meaningful and take action only while write demand, and 'other(1)' will return while read this object.
1.3.6.1.4.1.171.11.64.2.2.7.4INTEGER {other(1), enable(2), disable(3)}read-writecurrent
swL2IpMacBindingTrapLogState
OBJECT-TYPE
when enable(2),whenever there's a new MAC that violates the pre-defined Ip Mac Binding configuration, trap will be sent out and the relevant information will be logged in system.
1.3.6.1.4.1.171.11.64.2.2.7.5INTEGER {other(1), enable(2), disable(3)}read-writecurrent
swL2IpMacBindingACLMode
OBJECT-TYPE
when enable(2), Ip Mac Binding will use acl mode
1.3.6.1.4.1.171.11.64.2.2.7.6INTEGER {other(1), enable(2), disable(3)}read-writecurrent
swL2TrunkMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.64.2.2.8
swL2TrunkMaxSupportedEntries
OBJECT-TYPE
Maximum number of entries in the trunk configuration table (swL2TrunkCtrlTable).
1.3.6.1.4.1.171.11.64.2.2.8.1INTEGER (0..65535)read-onlycurrent
swL2TrunkCurrentNumEntries
OBJECT-TYPE
Current actived number of entries in the trunk configuration table.
1.3.6.1.4.1.171.11.64.2.2.8.2INTEGER (0..65535)read-onlycurrent
swL2TrunkCtrlTable
OBJECT-TYPE
This table specifys which ports group a set of ports(up to 8) into a single logical link.
1.3.6.1.4.1.171.11.64.2.2.8.3not-accessiblecurrent
swL2TrunkCtrlEntry
OBJECT-TYPE
A list of information specifies which ports group a set of ports(up to 8) into a single logical link.
1.3.6.1.4.1.171.11.64.2.2.8.3.1not-accessiblecurrent
swL2TrunkIndex
OBJECT-TYPE
The index of logical port trunk. The trunk group number depend on the existence of unit and module.
1.3.6.1.4.1.171.11.64.2.2.8.3.1.1INTEGER (0..65535)read-onlycurrent
swL2TrunkName
OBJECT-TYPE
The name of logical port trunk.
1.3.6.1.4.1.171.11.64.2.2.8.3.1.2DisplayString (SIZE(0..12))read-createcurrent
swL2TrunkMasterPort
OBJECT-TYPE
The object indicates the master port number of the port trunk entry. When using Port Trunk, you can not configure the other ports of the group except the master port. Their configuration must be same as the master port (e.g. speed, duplex, enabled/disabled, flow control, and so on).
1.3.6.1.4.1.171.11.64.2.2.8.3.1.3INTEGER (1..65535)read-createcurrent
swL2TrunkMember
OBJECT-TYPE
Indicate how many number of ports is included in this Trunk. The trunk port number depend on the existence of module. The maximum number of ports is 8 for one trunks.
1.3.6.1.4.1.171.11.64.2.2.8.3.1.4PortListread-createcurrent
swL2TrunkFloodingPort
OBJECT-TYPE
The object indicates the flooding port number of the port trunk entry. The first port of the trunk is implicitly configured to be the flooding port.
1.3.6.1.4.1.171.11.64.2.2.8.3.1.5INTEGER (1..65535)read-onlycurrent
swL2TrunkType
OBJECT-TYPE
This object indicated that type of the trunk group. static : is static trunk group lacp : is LACP trunk group .
1.3.6.1.4.1.171.11.64.2.2.8.3.1.6INTEGER {other(1), static(2), lacp(3)}read-createcurrent
swL2TrunkState
OBJECT-TYPE
This object indicates the status of this entry.
1.3.6.1.4.1.171.11.64.2.2.8.3.1.7RowStatusread-createcurrent
swL2TrunkAlgorithm
OBJECT-TYPE
This object configures to part of the packet examined by the switch when selecting the egress port for transmitting load-sharing data.
1.3.6.1.4.1.171.11.64.2.2.8.4INTEGER {other(1), mac-source(2), mac-destination(3), mac-source-dest(4), ip-source(5), ip-destination(6), ip-source-dest(7)}read-writecurrent
swL2MirrorMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.64.2.2.9
swL2MirrorLogicTargetPort
OBJECT-TYPE
This object indicates switch which port will sniff another port. A trunk port member cannot be configured as a target Snooping port. The port number is the sequential (logical) number which is also applied to bridge MIB, etc.
1.3.6.1.4.1.171.11.64.2.2.9.1INTEGER (0..65535)read-writecurrent
swL2MirrorPortSourceIngress
OBJECT-TYPE
The represent the ingress into the source port packet to sniffed.
1.3.6.1.4.1.171.11.64.2.2.9.2PortListread-writecurrent
swL2MirrorPortSourceEgress
OBJECT-TYPE
The represent the egress from the source port packet to sniffed.
1.3.6.1.4.1.171.11.64.2.2.9.3PortListread-writecurrent
swL2MirrorPortState
OBJECT-TYPE
This object indicates the port mirroring state. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disabled(2) - writing this value to the object, and then the corresponding entry will be removed from the table. enabled(3) - this entry is reside in the table.
1.3.6.1.4.1.171.11.64.2.2.9.4INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2IGMPMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.64.2.2.10
swL2IGMPMaxSupportedVlans
OBJECT-TYPE
Maximum number of Vlans in the layer 2 IGMP control table (swL2IGMPCtrlTable).
1.3.6.1.4.1.171.11.64.2.2.10.1INTEGER (0..65535)read-onlycurrent
swL2IGMPCtrlTable
OBJECT-TYPE
The table controls the Vlan's IGMP function. Its scale depends on current VLAN state (swL2VlanInfoStatus). If VLAN is disabled mode, there is only one entry in the table, with index 1. If VLAN is in Port-Base or 802.1q mode, the number of entries can be up to 12, with index range from 1 to 12.
1.3.6.1.4.1.171.11.64.2.2.10.3not-accessiblecurrent
swL2IGMPCtrlEntry
OBJECT-TYPE
The entry in IGMP control table (swL2IGMPCtrlTable). The entry is effective only when IGMP capture switch (swL2DevCtrlIGMPSnooping) is enabled.
1.3.6.1.4.1.171.11.64.2.2.10.3.1not-accessiblecurrent
swL2IGMPCtrlVid
OBJECT-TYPE
This object indicates the IGMP control entry's VLAN id. If VLAN is disabled, the Vid is always 0 and cannot be changed by management users. If VLAN is in Port-Base mode, the Vid is arranged from 1 to 12, fixed form. If VLAN is in 802.1q mode, the Vid setting can vary from 1 to 4094 by management user, and the Vid in each entry must be unique in the IGMP Control Table.
1.3.6.1.4.1.171.11.64.2.2.10.3.1.1INTEGER (0..65535)read-onlycurrent
swL2IGMPQueryInterval
OBJECT-TYPE
The frequency at which IGMP Host-Query packets are transmitted on this switch.
1.3.6.1.4.1.171.11.64.2.2.10.3.1.2INTEGER (1..65535)read-writecurrent
swL2IGMPMaxResponseTime
OBJECT-TYPE
The maximum query response time on this switch.
1.3.6.1.4.1.171.11.64.2.2.10.3.1.3INTEGER (1..25)read-writecurrent
swL2IGMPRobustness
OBJECT-TYPE
The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses.
1.3.6.1.4.1.171.11.64.2.2.10.3.1.4INTEGER (1..255)read-writecurrent
swL2IGMPLastMemberQueryInterval
OBJECT-TYPE
The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages.
1.3.6.1.4.1.171.11.64.2.2.10.3.1.5INTEGER (1..65535)read-writecurrent
swL2IGMPHostTimeout
OBJECT-TYPE
The timer value for sending IGMP query packet when none was sent by the host in the LAN. The timer works in per-VLAN basis. Our device will be activated to send the query message if the timer is expired. Please reference RFC2236-1997.
1.3.6.1.4.1.171.11.64.2.2.10.3.1.6INTEGER (1..16711450)read-writecurrent
swL2IGMPRouteTimeout
OBJECT-TYPE
The Router Timeout is how long a host must wait after hearing a Query before it may send any IGMPv2 messages.
1.3.6.1.4.1.171.11.64.2.2.10.3.1.7INTEGER (1..16711450)read-writecurrent
swL2IGMPLeaveTimer
OBJECT-TYPE
When a querier receives a Leave Group message for a group that has group members on the reception interface, it sends Group-Specific Queries every swL2IGMPLeaveTimer to the group being left.
1.3.6.1.4.1.171.11.64.2.2.10.3.1.8INTEGER (0..16711450)read-writecurrent
swL2IGMPQueryState
OBJECT-TYPE
This object decide the IGMP query enabled or disabled.
1.3.6.1.4.1.171.11.64.2.2.10.3.1.9INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2IGMPCurrentState
OBJECT-TYPE
This object indicates the current IGMP query state.
1.3.6.1.4.1.171.11.64.2.2.10.3.1.10INTEGER {other(1), querier(2), non-querier(3)}read-onlycurrent
swL2IGMPCtrlState
OBJECT-TYPE
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disable(2) - IGMP funtion is disabled for this entry. enable(3) - IGMP funtion is enabled for this entry.
1.3.6.1.4.1.171.11.64.2.2.10.3.1.11INTEGER {other(1), disable(2), enable(3)}read-writecurrent
swL2IGMPQueryInfoTable
OBJECT-TYPE
The table contains the number current IGMP query packets which is captured by this device, as well as the IGMP query packets sent by the device.
1.3.6.1.4.1.171.11.64.2.2.10.4not-accessiblecurrent
swL2IGMPQueryInfoEntry
OBJECT-TYPE
Information about current IGMP query information, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN entry are all enabled.
1.3.6.1.4.1.171.11.64.2.2.10.4.1not-accessiblecurrent
swL2IGMPInfoVid
OBJECT-TYPE
This object indicates the Vid of associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of IGMP control table (swL2IGMPCtrlTable).
1.3.6.1.4.1.171.11.64.2.2.10.4.1.1INTEGER (0..65535)read-onlycurrent
swL2IGMPInfoQueryCount
OBJECT-TYPE
This object indicates the number of query packets received since the IGMP function enabled, in per-VLAN basis.
1.3.6.1.4.1.171.11.64.2.2.10.4.1.2INTEGER (0..65535)read-onlycurrent
swL2IGMPInfoTxQueryCount
OBJECT-TYPE
This object indicates the send count of IGMP query messages, in per-VLAN basis. In case of IGMP timer expiration, the switch sends IGMP query packets to related VLAN member ports and increment this object by 1.
1.3.6.1.4.1.171.11.64.2.2.10.4.1.3INTEGER (0..65535)read-onlycurrent
swL2IGMPInfoTable
OBJECT-TYPE
The table containing current IGMP information which captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entry are all enabled. Note that the priority of IGMP table entries is lower than Filtering Table, i.e. if there is a table hash collision between the entries of IGMP Table and Filtering Table inside the switch H/W address table, then Filtering Table entry overwrite the colliding entry of IGMP Table. See swL2FilterMgmt description also.
1.3.6.1.4.1.171.11.64.2.2.10.5not-accessiblecurrent
swL2IGMPInfoEntry
OBJECT-TYPE
Information about current IGMP information which captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entry are all enabled.
1.3.6.1.4.1.171.11.64.2.2.10.5.1not-accessiblecurrent
swL2IGMPVid
OBJECT-TYPE
This object indicates the Vid of individual IGMP table entry. It shows the Vid of IGMP report information captured on network.
1.3.6.1.4.1.171.11.64.2.2.10.5.1.1INTEGER (0..65535)read-onlycurrent
swL2IGMPGroupIpAddr
OBJECT-TYPE
This object is identify group ip address which is captured from IGMP packet, in per-Vlan basis.
1.3.6.1.4.1.171.11.64.2.2.10.5.1.2IpAddressread-onlycurrent
swL2IGMPMacAddr
OBJECT-TYPE
This object is identify mac address which is corresponding to swL2IGMPGroupIpAddr, in per-Vlan basis.
1.3.6.1.4.1.171.11.64.2.2.10.5.1.3MacAddressread-onlycurrent
swL2IGMPPortMap
OBJECT-TYPE
This object indicates which ports are belong to the same multicast group, in per-Vlan basis. Each multicast group has a octect string to indicate with port map. The most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'(Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant). The 4 octets is represent one unit port according its logic port. If the unit less 32 port, the other port don't care just fill zero.
1.3.6.1.4.1.171.11.64.2.2.10.5.1.4PortListread-onlycurrent
swL2IGMPIpGroupReportCount
OBJECT-TYPE
This object indicate how much report packet was receive by our device corresponding with this entry from IGMP function enabled, in per-Vlan basis.
1.3.6.1.4.1.171.11.64.2.2.10.5.1.5INTEGER (0..65535)read-onlycurrent
swL2IGMPMulticastVlanTable
OBJECT-TYPE
The information of the IGMP snooping multicast vlan table.
1.3.6.1.4.1.171.11.64.2.2.10.6not-accessiblecurrent
swL2IGMPMulticastVlanEntry
OBJECT-TYPE
The entry of swL2IGMPMulticastVlanTable.
1.3.6.1.4.1.171.11.64.2.2.10.6.1not-accessiblecurrent
swL2IGMPMulticastVlanid
OBJECT-TYPE
This object indicates the vlan id of the IGMP snooping multicast vlan entry.
1.3.6.1.4.1.171.11.64.2.2.10.6.1.1INTEGER (2..4094)read-onlycurrent
swL2IGMPMulticastVlanName
OBJECT-TYPE
This object indicates the vlan name of the IGMP snooping multicast vlan entry.
1.3.6.1.4.1.171.11.64.2.2.10.6.1.2SnmpAdminString (SIZE(0..32))read-createcurrent
swL2IGMPMulticastVlanSourcePort
OBJECT-TYPE
This object indicate the portlist of the source ports of IGMP snooping multicast vlan. The source ports will be set as tag ports of the vlan entry. And the IGMP control messages received from the member ports would be forwarded to the source ports.
1.3.6.1.4.1.171.11.64.2.2.10.6.1.3PortListread-createcurrent
swL2IGMPMulticastVlanMemberPort
OBJECT-TYPE
This object indicate the portlist of the member ports of IGMP snooping multicast vlan. The source ports will be set as untag ports of the vlan entry. And the IGMP control messages received from the member ports would be forwarded to the source ports.
1.3.6.1.4.1.171.11.64.2.2.10.6.1.4PortListread-createcurrent
swL2IGMPMulticastVlanRowStatus
OBJECT-TYPE
This object indicates the status of this entry.
1.3.6.1.4.1.171.11.64.2.2.10.6.1.5RowStatusread-createcurrent
swL2IGMPMulticastVlanReplaceSourceIP
OBJECT-TYPE
This object is used to replace the source IP address in the IP header for IGMP control packets.
1.3.6.1.4.1.171.11.64.2.2.10.6.1.6IpAddressread-createcurrent
swL2IGMPRouterPortTable
OBJECT-TYPE
The information of the router port table.
1.3.6.1.4.1.171.11.64.2.2.10.7not-accessiblecurrent
swL2IGMPRouterPortEntry
OBJECT-TYPE
The entry of swL2IGMPRouterPortTable.
1.3.6.1.4.1.171.11.64.2.2.10.7.1not-accessiblecurrent
swL2IGMPRouterPortVlanid
OBJECT-TYPE
This object indicates the vlan id of the router port entry.
1.3.6.1.4.1.171.11.64.2.2.10.7.1.1INTEGER (1..4094)read-onlycurrent
swL2IGMPRouterPortVlanName
OBJECT-TYPE
This object indicates the vlan name of the router port entry.
1.3.6.1.4.1.171.11.64.2.2.10.7.1.2SnmpAdminString (SIZE(0..32))read-onlycurrent
swL2IGMPRouterPortStaticPortList
OBJECT-TYPE
This object indicate the static portlist of the router port entry.
1.3.6.1.4.1.171.11.64.2.2.10.7.1.3PortListread-writecurrent
swL2IGMPRouterPortDynamicPortList
OBJECT-TYPE
This object indicate the dynamic portlist of the router port entry.
1.3.6.1.4.1.171.11.64.2.2.10.7.1.4PortListread-onlycurrent
swL2IGMPRouterPortForbiddenPortList
OBJECT-TYPE
This object indicate the forbidden portlist of the router port entry.
1.3.6.1.4.1.171.11.64.2.2.10.7.1.5PortListread-writecurrent
swL2DhcpRelayMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.64.2.2.11
swL2DhcpRelayState
OBJECT-TYPE
This object indicates DHCP relay function is enabled or disabled.
1.3.6.1.4.1.171.11.64.2.2.11.1INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2DhcpRelayHopCount
OBJECT-TYPE
This object indicates the maximum number of router hops that the DHCP packets can cross.
1.3.6.1.4.1.171.11.64.2.2.11.2INTEGER (1..16)read-writecurrent
swL2DhcpRelayTimeThreshold
OBJECT-TYPE
This object indicates the minimum time in seconds within which the switch must relay the DHCP request. If this time is exceeded, the switch will drop the DHCP packet.
1.3.6.1.4.1.171.11.64.2.2.11.3INTEGER (0..65535)read-writecurrent
swL2DhcpRelayOption82State
OBJECT-TYPE
This object indicates DHCP relay agent information option 82 function is enabled or disabled.
1.3.6.1.4.1.171.11.64.2.2.11.4INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2DhcpRelayOption82Check
OBJECT-TYPE
This object indicates the checking mechanism of DHCP relay agent information option 82 is enabled or disabled.
1.3.6.1.4.1.171.11.64.2.2.11.5INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2DhcpRelayOption82Policy
OBJECT-TYPE
This object indicates the reforwarding policy of DHCP relay agent information option 82. replace(1) - replace the exiting option 82 field in messages. drop(2) - discard messages with existing option 82 field. keep(3) - retain the existing option 82 field in messages.
1.3.6.1.4.1.171.11.64.2.2.11.6INTEGER {replace(1), drop(2), keep(3)}read-writecurrent
swL2DhcpRelayCtrlTable
OBJECT-TYPE
This table specifys the IP address as a destination to forward (relay) DHCP packets to.
1.3.6.1.4.1.171.11.64.2.2.11.7not-accessiblecurrent
swL2DhcpRelayCtrlEntry
OBJECT-TYPE
A list of information specifies the IP address as a destination to forward (relay) DHCP packets to.
1.3.6.1.4.1.171.11.64.2.2.11.7.1not-accessiblecurrent
swL2DhcpRelayCtrlInterfaceName
OBJECT-TYPE
The name of the IP interface.
1.3.6.1.4.1.171.11.64.2.2.11.7.1.1DisplayString (SIZE(1..12))read-onlycurrent
swL2DhcpRelayCtrlServer
OBJECT-TYPE
The DHCP server IP address.
1.3.6.1.4.1.171.11.64.2.2.11.7.1.2IpAddressread-onlycurrent
swL2DhcpRelayCtrlState
OBJECT-TYPE
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry is reside in the table.
1.3.6.1.4.1.171.11.64.2.2.11.7.1.3INTEGER {other(1), invalid(2), valid(3)}read-writecurrent
swL2LoopDetectMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.64.2.2.12
swL2LoopDetectCtrl
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.64.2.2.12.1
swL2LoopDetectAdminState
OBJECT-TYPE
This object indicates the loopback detection status for the system.
1.3.6.1.4.1.171.11.64.2.2.12.1.1INTEGER {enabled(1), disabled(2)}read-writecurrent
swL2LoopDetectInterval
OBJECT-TYPE
This object indicates the interval value, the range is from 1 to 32767 seconds.
1.3.6.1.4.1.171.11.64.2.2.12.1.2INTEGER (1..32767)read-writecurrent
swL2LoopDetectRecoverTime
OBJECT-TYPE
This object indicates the recover time, the range is from 60 to 1000000. The value of 0 disables the recover function.
1.3.6.1.4.1.171.11.64.2.2.12.1.3INTEGER (0..1000000)read-writecurrent
swL2LoopDetectMode
OBJECT-TYPE
This object indicates the loopback detection mode for the system.
1.3.6.1.4.1.171.11.64.2.2.12.1.4INTEGER {vlan-based(1), port-based(2)}read-writecurrent
swL2LoopDetectPortMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.64.2.2.12.2
swL2LoopDetectPortTable
OBJECT-TYPE
The table specifies the loopback detection function specified by port.
1.3.6.1.4.1.171.11.64.2.2.12.2.1not-accessiblecurrent
swL2LoopDetectPortEntry
OBJECT-TYPE
The table specifies the loopback detection function specified by port.
1.3.6.1.4.1.171.11.64.2.2.12.2.1.1not-accessiblecurrent
swL2LoopDetectPortIndex
OBJECT-TYPE
This object indicates the module's port number. The range is from 1 to the maximum port number specified in the module
1.3.6.1.4.1.171.11.64.2.2.12.2.1.1.1INTEGER (1..65535)read-onlycurrent
swL2LoopDetectPortState
OBJECT-TYPE
This object indicates the loopback detection function state on the port.
1.3.6.1.4.1.171.11.64.2.2.12.2.1.1.2INTEGER {enabled(1), disabled(2)}read-writecurrent
swL2LoopDetectPortLoopVLAN
OBJECT-TYPE
This object indicates the VLAN list that has detected a loopback.
1.3.6.1.4.1.171.11.64.2.2.12.2.1.1.3DisplayStringread-onlycurrent
swL2LoopDetectPortLoopStatus
OBJECT-TYPE
This object indicates the port status.
1.3.6.1.4.1.171.11.64.2.2.12.2.1.1.4INTEGER {normal(1), loop(2), error(3)}read-onlycurrent
swL2TrafficSegMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.64.2.2.13
swL2TrafficSegTable
OBJECT-TYPE
This table specifys the port just can forward traffic to the specific port list.
1.3.6.1.4.1.171.11.64.2.2.13.1not-accessiblecurrent
swL2TrafficSegEntry
OBJECT-TYPE
A list of information specifies the port with its traffic forward list.
1.3.6.1.4.1.171.11.64.2.2.13.1.1not-accessiblecurrent
swL2TrafficSegPort
OBJECT-TYPE
The port number of the logical port.
1.3.6.1.4.1.171.11.64.2.2.13.1.1.1INTEGER (0..65535)read-onlycurrent
swL2TrafficSegForwardPorts
OBJECT-TYPE
The port list that the specific port can forward traffic.
1.3.6.1.4.1.171.11.64.2.2.13.1.1.2PortListread-writecurrent
swL2PortSecurityMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.64.2.2.14
swL2PortSecurityControlTable
OBJECT-TYPE
port security feature which controls the address leaning capability and the traffic forwarding decision. Each port can have this function enabled or disabled. When it is enabled and a number is given said N, which allows N addresses to be learned at this port, the first N learned addresses are locked at this port as static entry. When the learned addresses number reach N, any coming packet with not learned source addresses are discarded (e.g. dropped) and no more new addresses can be learned at this port.
1.3.6.1.4.1.171.11.64.2.2.14.1not-accessiblecurrent
swL2PortSecurityControlEntry
OBJECT-TYPE
A list of information contained in swL2PortSecurityControlTable.
1.3.6.1.4.1.171.11.64.2.2.14.1.1not-accessiblecurrent
swL2PortSecurityPortIndex
OBJECT-TYPE
Indicates the secured port to lock address learning.
1.3.6.1.4.1.171.11.64.2.2.14.1.1.1INTEGER (1..255)read-onlycurrent
swL2PortSecurityMaxLernAddr
OBJECT-TYPE
Indicates allowable number of addresses to be learned at this port.
1.3.6.1.4.1.171.11.64.2.2.14.1.1.2INTEGER (0..65535)read-writecurrent
swL2PortSecurityMode
OBJECT-TYPE
Indicates the mode of locking address. In deleteOnTimeout(3) mode - the locked addresses can be aged out after aging timer expire. In this mode, when the locked address is aged out, the number of address can be learned has to be increased by one. In deleteOnReset(4) mode - never age out the locked addresses unless restart the system to prevent from port movement or intrusion.
1.3.6.1.4.1.171.11.64.2.2.14.1.1.3INTEGER {other(1), permanent(2), deleteOnTimeout(3), deleteOnReset(4)}read-writecurrent
swL2PortSecurityAdmState
OBJECT-TYPE
Indicates administration state of locking address.
1.3.6.1.4.1.171.11.64.2.2.14.1.1.4INTEGER {other(1), enable(2), disable(3)}read-writecurrent
swL2PortSecurityTrapLogState
OBJECT-TYPE
when enable(2),whenever there's a new MAC that violates the pre-defined port security configuration, trap will be sent out and the relevant information will be logged in system.
1.3.6.1.4.1.171.11.64.2.2.14.2INTEGER {other(1), enable(2), disable(3)}read-writecurrent
swL2MgmtMIBTraps
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.64.2.2.15
swL2MgmtMIBTrapPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.64.2.2.15.0
swl2NotificationBidings
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.64.2.2.15.1
swL2macNotifyInfo
OBJECT-TYPE
This object indicates the last time reboot information.
1.3.6.1.4.1.171.11.64.2.2.15.1.1OCTET STRING (SIZE(0..1024))read-onlycurrent
swl2NotifyPortSecurity
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.64.2.2.15.2
swL2PortSecurityViolationMac
OBJECT-TYPE
This object indicates the MAC address that violates the port security configuration.
1.3.6.1.4.1.171.11.64.2.2.15.2.1MacAddressaccessible-for-notifycurrent
swl2NotifyIpMacBinding
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.64.2.2.15.3
swL2IpMacBindingViolationIP
OBJECT-TYPE
This object indicates the MAC address that violates the IP-Mac Binging configuration.
1.3.6.1.4.1.171.11.64.2.2.15.3.1MacAddressaccessible-for-notifycurrent
swL2IpMacBindingViolationMac
OBJECT-TYPE
This object indicates the IP address that violates the IP-Mac Binging configuration.
1.3.6.1.4.1.171.11.64.2.2.15.3.2MacAddressaccessible-for-notifycurrent

Notifications

NameOIDStatus
swL2macNotification
NOTIFICATION-TYPE
This trap indicate the mac addresses variation in address table .
1.3.6.1.4.1.171.11.64.2.2.15.0.3current
swL2porttypechgNotification
NOTIFICATION-TYPE
This trap indicate the port type change.
1.3.6.1.4.1.171.11.64.2.2.15.0.4current
swPowerStatusChg
NOTIFICATION-TYPE
Power Status change notification.
1.3.6.1.4.1.171.11.64.2.2.15.0.5current
swPowerFailure
NOTIFICATION-TYPE
Power Failure notification.
1.3.6.1.4.1.171.11.64.2.2.15.0.6current
swPowerRecover
NOTIFICATION-TYPE
Power Recover notification.
1.3.6.1.4.1.171.11.64.2.2.15.0.7current
swL2PortSecurityViolationTrap
NOTIFICATION-TYPE
When the port_security trap is enabled, if there's a new MAC that violates the pre-defined port security configuration, trap will be sent out
1.3.6.1.4.1.171.11.64.2.2.15.2.2current
swL2IpMacBindingViolationTrap
NOTIFICATION-TYPE
When the IP-Mac Binging trap is enabled, if there's a new MAC that violates the pre-defined port security configuration, trap will be sent out
1.3.6.1.4.1.171.11.64.2.2.15.3.3current