DES-1228-MIB
- Registered at
- 1.3.6.1.4.1.171.10.75.2
- Namespace
- dlink
- Source file
DES-1228-MIB- Digest
sha256:5972d678721bcb811fd50cb7b0fd71637d3e28bba4ed15a51283144fae9e270f
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso, mib-2 |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
DES-1228-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| MacAddress type | ||||
| OwnerString type | ||||
| PortList TEXTUAL-CONVENTION Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. | current | |||
| RowStatus TEXTUAL-CONVENTION | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| d_link OBJECT-IDENTITY | 1.3.6.1.4.1.171 | |||
| dlink_products OBJECT-IDENTITY | 1.3.6.1.4.1.171.10 | |||
| dlink_DES12XXSeriesProd OBJECT-IDENTITY | 1.3.6.1.4.1.171.10.75 | |||
| des_1228a1 OBJECT-IDENTITY | 1.3.6.1.4.1.171.10.75.2 | |||
| companyCommGroup OBJECT-IDENTITY | 1.3.6.1.4.1.171.10.75.2.1 | |||
| commSetTable OBJECT-TYPE A list of SNMP Set Community Entries. | 1.3.6.1.4.1.171.10.75.2.1.1 | not-accessible | mandatory | |
| commSetEntry OBJECT-TYPE A list of SNMP Set Community properties. | 1.3.6.1.4.1.171.10.75.2.1.1.1 | not-accessible | mandatory | |
| commSetIndex OBJECT-TYPE An index that uniquely identifies an entry in the Community Table. Eight entries are currently supported. | 1.3.6.1.4.1.171.10.75.2.1.1.1.1 | INTEGER (1..2) | read-only | mandatory |
| commSetName OBJECT-TYPE The name of this SNMP Set Community Entry. | 1.3.6.1.4.1.171.10.75.2.1.1.1.2 | DisplayString (SIZE(0..20)) | read-write | mandatory |
| commSetStatus OBJECT-TYPE The RowStatus for the Set Community entry. | 1.3.6.1.4.1.171.10.75.2.1.1.1.3 | RowStatus | read-write | mandatory |
| commGetTable OBJECT-TYPE A list of SNMP Get Community Entries. | 1.3.6.1.4.1.171.10.75.2.1.2 | not-accessible | mandatory | |
| commGetEntry OBJECT-TYPE A list of SNMP Get Community properties. | 1.3.6.1.4.1.171.10.75.2.1.2.1 | not-accessible | mandatory | |
| commGetIndex OBJECT-TYPE An index that uniquely identifies an entry in the Community Table. Eight entries are currently supported. | 1.3.6.1.4.1.171.10.75.2.1.2.1.1 | INTEGER (1..2) | read-only | mandatory |
| commGetName OBJECT-TYPE The name of this SNMP Get Community Entry. | 1.3.6.1.4.1.171.10.75.2.1.2.1.2 | DisplayString (SIZE(0..20)) | read-write | mandatory |
| commGetStatus OBJECT-TYPE The RowStatus for the Get Community entry. | 1.3.6.1.4.1.171.10.75.2.1.2.1.3 | RowStatus | read-write | mandatory |
| commTrapTable OBJECT-TYPE A list of SNMP Trap Community Entries. | 1.3.6.1.4.1.171.10.75.2.1.3 | not-accessible | mandatory | |
| commTrapEntry OBJECT-TYPE A list of SNMP Trap Community properties. | 1.3.6.1.4.1.171.10.75.2.1.3.1 | not-accessible | mandatory | |
| commTrapIndex OBJECT-TYPE An index that uniquely identifies an entry in the Community Table. Eight entries are currently supported. | 1.3.6.1.4.1.171.10.75.2.1.3.1.1 | INTEGER (1..2) | read-only | mandatory |
| commTrapName OBJECT-TYPE The name of this SNMP Trap Community Entry. | 1.3.6.1.4.1.171.10.75.2.1.3.1.2 | DisplayString (SIZE(0..20)) | read-write | mandatory |
| commTrapIpAddress OBJECT-TYPE The IP Address of this SNMP Trap Community Entry. | 1.3.6.1.4.1.171.10.75.2.1.3.1.3 | IpAddress | read-write | mandatory |
| commTrapSNMPBootup OBJECT-TYPE Bootup trap | 1.3.6.1.4.1.171.10.75.2.1.3.1.5 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| commTrapSNMPTPLinkUpDown OBJECT-TYPE Twisted Pair link up / link down trap. | 1.3.6.1.4.1.171.10.75.2.1.3.1.6 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| commTrapSNMPFiberLinkUpDown OBJECT-TYPE Fiber link up / link down trap. | 1.3.6.1.4.1.171.10.75.2.1.3.1.7 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| commTrapTrapAbnormalTPRXError OBJECT-TYPE Twisted Pair abnormal receive error trap. | 1.3.6.1.4.1.171.10.75.2.1.3.1.9 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| commTrapTrapAbnormalTPTXError OBJECT-TYPE Twisted Pair abnormal transmit error trap. | 1.3.6.1.4.1.171.10.75.2.1.3.1.10 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| commTrapTrapAbnormalFiberRXError OBJECT-TYPE Fiber abnormal receive error trap. | 1.3.6.1.4.1.171.10.75.2.1.3.1.11 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| commTrapTrapAbnormalFiberTXError OBJECT-TYPE Fiber abnormal transmit error trap. | 1.3.6.1.4.1.171.10.75.2.1.3.1.12 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| commTrapStatus OBJECT-TYPE The RowStatus for the Trap Community entry. | 1.3.6.1.4.1.171.10.75.2.1.3.1.13 | RowStatus | read-write | mandatory |
| companyMiscGroup OBJECT-IDENTITY | 1.3.6.1.4.1.171.10.75.2.3 | |||
| miscReset OBJECT-TYPE Physically resets the unit - use with care. A (1) resets the unit, a (2) does nothing. | 1.3.6.1.4.1.171.10.75.2.3.2 | INTEGER {reset(1), noop(2)} | read-write | mandatory |
| miscStatisticsReset OBJECT-TYPE Resets the units statistics. A (1) resets the unit, a (2) does nothing. | 1.3.6.1.4.1.171.10.75.2.3.3 | INTEGER {reset(1), noop(2)} | read-write | mandatory |
| companySpanGroup OBJECT-IDENTITY | 1.3.6.1.4.1.171.10.75.2.4 | |||
| spanOnOff OBJECT-TYPE Enable/Disable Spanning Tree. A (1) enables, a (2) disables. | 1.3.6.1.4.1.171.10.75.2.4.1 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| companyConfigGroup OBJECT-IDENTITY | 1.3.6.1.4.1.171.10.75.2.11 | |||
| configVerSwPrimary OBJECT-TYPE The software image version string. | 1.3.6.1.4.1.171.10.75.2.11.1 | DisplayString (SIZE(0..31)) | read-only | mandatory |
| configVerHwChipSet OBJECT-TYPE The hardware chipset version string. | 1.3.6.1.4.1.171.10.75.2.11.2 | DisplayString (SIZE(0..31)) | read-only | mandatory |
| configBootTftpOperation OBJECT-TYPE The tftp operation to perform downloading the boot image to the unit. This object is used in conjunction with configBootTftpServerIp and configBootImageFileName. | 1.3.6.1.4.1.171.10.75.2.11.3 | INTEGER {download(1), upload(2)} | read-write | mandatory |
| configBootTftpServerIp OBJECT-TYPE The TFTP server's IP address used for downloading the boot image. | 1.3.6.1.4.1.171.10.75.2.11.4 | IpAddress | read-write | mandatory |
| configBootImageFileName OBJECT-TYPE The filename of the boot image to download. | 1.3.6.1.4.1.171.10.75.2.11.5 | DisplayString (SIZE(0..63)) | read-write | mandatory |
| configPortTable OBJECT-TYPE A list of interface entries used for enterprise specific configuration. The number of entries is given by the value of ifNumber. All interface entries are assumed to be Ethernet interafaces. | 1.3.6.1.4.1.171.10.75.2.11.6 | not-accessible | mandatory | |
| configPortEntry OBJECT-TYPE An enterprise specific interface entry. | 1.3.6.1.4.1.171.10.75.2.11.6.1 | not-accessible | mandatory | |
| configPort OBJECT-TYPE A unique value for each interface that correlates to ifIndex. Its value ranges between 1 and the value of ifNumber. | 1.3.6.1.4.1.171.10.75.2.11.6.1.1 | INTEGER | read-only | mandatory |
| configPortSpeed OBJECT-TYPE The port's speed desired state. | 1.3.6.1.4.1.171.10.75.2.11.6.1.2 | INTEGER {disable(1), auto(2), rate10M-Half(3), rate10M-Full(4), rate100M-Half(5), rate100M-Full(6), rate1000M-Full(7)} | read-write | mandatory |
| configPortOperStatus OBJECT-TYPE The port's operating speed state. | 1.3.6.1.4.1.171.10.75.2.11.6.1.3 | INTEGER {down(1), rate10M-Half(2), rate10M-Full(3), rate100M-Half(4), rate100M-Full(5), rate1000M-Full(6)} | read-only | mandatory |
| configPortPriority OBJECT-TYPE For ingress untagged packets, the per port 'Default Priority' setting will be applied to packets of each port to provide port-based traffic prioritization. For ingress tagged packets, D-Link Smart Switches will refer to their 802.1p information and prioritize them with 4 different priority queues. | 1.3.6.1.4.1.171.10.75.2.11.6.1.6 | INTEGER {low(1), middle(2), high(3), highest(4)} | read-write | mandatory |
| configVLANMode OBJECT-TYPE Determines the VLAN mode. | 1.3.6.1.4.1.171.10.75.2.11.7 | INTEGER {modeTagBased(1)} | read-write | mandatory |
| configMirrorTable OBJECT-TYPE A list of the Mirror | 1.3.6.1.4.1.171.10.75.2.11.8 | not-accessible | mandatory | |
| configMirrorEntry OBJECT-TYPE A Mirror entry containing the Mirror id and mode. | 1.3.6.1.4.1.171.10.75.2.11.8.1 | not-accessible | mandatory | |
| configMirrorId OBJECT-TYPE An index that uniquely identifies an entry in the Mirror Table. One entries are currently supported. | 1.3.6.1.4.1.171.10.75.2.11.8.1.1 | INTEGER (1) | read-only | mandatory |
| configMirrorMon OBJECT-TYPE When mirroring is enabled (configMirroringMode = ingress, egress, both), this identifies the mirroring monitoring port. This value has a valid range of 1 to ifNumber when enabled. | 1.3.6.1.4.1.171.10.75.2.11.8.1.2 | INTEGER | read-write | mandatory |
| configMirrorTXSrc OBJECT-TYPE When mirroring is enabled , this identifies the TX mirroring source port.This value has a valid range of 1 to ifNumber when enbaled.Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc.Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. | 1.3.6.1.4.1.171.10.75.2.11.8.1.3 | PortList | read-write | mandatory |
| configMirrorRXSrc OBJECT-TYPE When mirroring is enabled , this identifies the RX mirroring source port.This value has a valid range of 1 to ifNumber when enbaled.Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc.Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. | 1.3.6.1.4.1.171.10.75.2.11.8.1.4 | PortList | read-write | mandatory |
| configMirrorStatus OBJECT-TYPE The RowStatus for the Mirror entry. | 1.3.6.1.4.1.171.10.75.2.11.8.1.5 | RowStatus | read-write | mandatory |
| configSNMPEnable OBJECT-TYPE Enable/Disable SNMP function. A (1) enables, a (2) disables. | 1.3.6.1.4.1.171.10.75.2.11.9 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| configIpAssignmentMode OBJECT-TYPE Indicates whether the device address is assigned by the user (manual), or DHCP, or Others(BootP). | 1.3.6.1.4.1.171.10.75.2.11.12 | INTEGER {manual(1), dhcp(2), other(3)} | read-write | mandatory |
| configPhysAddress OBJECT-TYPE The interface's address at the protocol layer immediately 'below' the network layer in the protocol stack. This is the physical address for the end-station. | 1.3.6.1.4.1.171.10.75.2.11.13 | MacAddress | read-only | mandatory |
| configPasswordAdmin OBJECT-TYPE The adminstrator password | 1.3.6.1.4.1.171.10.75.2.11.15 | DisplayString (SIZE(0..20)) | write-only | mandatory |
| configIpAddress OBJECT-TYPE The IP Address for the RDU box. | 1.3.6.1.4.1.171.10.75.2.11.16 | IpAddress | read-write | mandatory |
| configNetMask OBJECT-TYPE The network mask for the RDU box. | 1.3.6.1.4.1.171.10.75.2.11.17 | IpAddress | read-write | mandatory |
| configGateway OBJECT-TYPE The Gatway Address for the unit. | 1.3.6.1.4.1.171.10.75.2.11.18 | IpAddress | read-write | mandatory |
| configSave OBJECT-TYPE Physically saves the current configuration to nvram. - use with care. (1) saves the configuration (2) does nothing. | 1.3.6.1.4.1.171.10.75.2.11.19 | INTEGER {save(1), noop(2)} | read-write | mandatory |
| configRestoreDefaults OBJECT-TYPE Restores the configuration of the unit to the original settings. | 1.3.6.1.4.1.171.10.75.2.11.22 | INTEGER {restore(1), noop(2)} | read-write | mandatory |
| configTftpServerIpAddress OBJECT-TYPE The TFTP server's IP address used to upload or download configuration file. | 1.3.6.1.4.1.171.10.75.2.11.32 | IpAddress | read-write | mandatory |
| configTftpServerFileName OBJECT-TYPE The filename used to store or retrieve the configuration file from the tftp server. | 1.3.6.1.4.1.171.10.75.2.11.33 | DisplayString (SIZE(0..64)) | read-write | mandatory |
| configTftpOperation OBJECT-TYPE The tftp operation to perform either downloading the configuration file to the unit or uploading the current configuration file to the tftp server. This object is used in conjunction with configTftpServerIpAddress and configTftpServerFileName. | 1.3.6.1.4.1.171.10.75.2.11.34 | INTEGER {download(1), upload(2)} | read-write | mandatory |
| configSafeguardEnable OBJECT-TYPE Enable/Disable Safeguard Engine. D-Link Safeguard Engine is a robust and innovative technology developed by D-Link, which will automatically throttle the impact of packet flooding into the switch's CPU. It will keep D-Link Switches better protected from being too frequently interrupted by malicious viruses or worm attacks. | 1.3.6.1.4.1.171.10.75.2.11.44 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| companyTVlanGroup OBJECT-IDENTITY | 1.3.6.1.4.1.171.10.75.2.13 | |||
| tvlanTable OBJECT-TYPE A list of the VLANs | 1.3.6.1.4.1.171.10.75.2.13.1 | not-accessible | mandatory | |
| tvlanEntry OBJECT-TYPE A VLAN entry containing the VLAN id and name. | 1.3.6.1.4.1.171.10.75.2.13.1.1 | not-accessible | mandatory | |
| tvlanId OBJECT-TYPE The VLAN identifier. A maximum of 256 VLANs is supported. The value must be from 1 to 4094. | 1.3.6.1.4.1.171.10.75.2.13.1.1.1 | INTEGER | read-only | mandatory |
| tvlanName OBJECT-TYPE The VLAN name.Length must between 1 and 20. | 1.3.6.1.4.1.171.10.75.2.13.1.1.2 | DisplayString | read-write | mandatory |
| tvlanMember OBJECT-TYPE The set of the device's member ports that belong to the VLAN. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. | 1.3.6.1.4.1.171.10.75.2.13.1.1.3 | PortList | read-write | mandatory |
| tvlanUntaggedPorts OBJECT-TYPE If that bit has a value of '1' the outgoing frame on the egress port is untagged. If that bit has a value of '0' the outgoing frame on the egress port is tagged. | 1.3.6.1.4.1.171.10.75.2.13.1.1.4 | PortList | read-write | mandatory |
| tvlanStatus OBJECT-TYPE The status of an entry in the VLAN Table. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available. | 1.3.6.1.4.1.171.10.75.2.13.1.1.5 | INTEGER {active(1), notready(3), createAndwait(5), destroy(6)} | read-write | mandatory |
| tvlanManagementOnOff OBJECT-TYPE Enable/Disable management VLAN mechanism. | 1.3.6.1.4.1.171.10.75.2.13.2 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| tvlanManagementid OBJECT-TYPE The management VLAN ID which allow to forward to CPU. | 1.3.6.1.4.1.171.10.75.2.13.3 | INTEGER | read-write | mandatory |
| tvlanPortTable OBJECT-TYPE A list of ports and their associated VLAN. | 1.3.6.1.4.1.171.10.75.2.13.4 | not-accessible | mandatory | |
| tvlanPortEntry OBJECT-TYPE Information pertaining to an individual port regarding to which VLAN it belongs. | 1.3.6.1.4.1.171.10.75.2.13.4.1 | not-accessible | mandatory | |
| tvlanPortPortId OBJECT-TYPE A port identifier that is in the range of 1 to ifNumber. | 1.3.6.1.4.1.171.10.75.2.13.4.1.1 | INTEGER | read-only | mandatory |
| tvlanPortVlanId OBJECT-TYPE The default VLAN identifier, PVID. The value must be from 1 to 4094. | 1.3.6.1.4.1.171.10.75.2.13.4.1.2 | INTEGER | read-write | mandatory |
| tvlanAsyOnOff OBJECT-TYPE Enable/Disable IEEE 802.1Q Asymmetric VLAN | 1.3.6.1.4.1.171.10.75.2.13.5 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| companyPortTrunkGroup OBJECT-IDENTITY | 1.3.6.1.4.1.171.10.75.2.14 | |||
| portTrunkTable OBJECT-TYPE A list of port trunks and their associated members. | 1.3.6.1.4.1.171.10.75.2.14.1 | not-accessible | mandatory | |
| portTrunkEntry OBJECT-TYPE A port trunk entry containing the trunk id and trunk members. | 1.3.6.1.4.1.171.10.75.2.14.1.1 | not-accessible | mandatory | |
| portTrunkId OBJECT-TYPE The port trunk identifier. The current range is from 1 to 6. | 1.3.6.1.4.1.171.10.75.2.14.1.1.1 | INTEGER | read-only | mandatory |
| portTrunkName OBJECT-TYPE The Trunk name.Length must between 1 and 20. | 1.3.6.1.4.1.171.10.75.2.14.1.1.2 | DisplayString | read-write | mandatory |
| portTrunkMember OBJECT-TYPE A port trunk member value indicates which port is a member of the specified trunk. Valid values are in the range from 0 to ifNumber. A zero indicates that no port is contained in the specifed member. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. | 1.3.6.1.4.1.171.10.75.2.14.1.1.3 | PortList | read-write | mandatory |
| companyStaticGroup OBJECT-IDENTITY | 1.3.6.1.4.1.171.10.75.2.21 | |||
| staticOnOff OBJECT-TYPE Enable/Disable Static MAC. Currently it doesn't support 'disabled' function. | 1.3.6.1.4.1.171.10.75.2.21.1 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| staticAutoLearning OBJECT-TYPE The set of the device's member ports that belong to the Static MAC auto learning enable/disable. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is in auto learning enable state; the port is not in auto learning state if its bit has a value of '0'. | 1.3.6.1.4.1.171.10.75.2.21.2 | PortList | read-write | mandatory |
| staticTable OBJECT-TYPE A list of the Static MACs | 1.3.6.1.4.1.171.10.75.2.21.3 | not-accessible | mandatory | |
| staticEntry OBJECT-TYPE A Static MAC entry containing the mac and forwarding port. | 1.3.6.1.4.1.171.10.75.2.21.3.1 | not-accessible | mandatory | |
| staticId OBJECT-TYPE The Static MAC identifier. A maximum of 60 Static MACs is supported. The value must be from 1 to 60 | 1.3.6.1.4.1.171.10.75.2.21.3.1.1 | INTEGER | read-only | mandatory |
| staticMac OBJECT-TYPE The Static MAC associated with the Id. | 1.3.6.1.4.1.171.10.75.2.21.3.1.2 | MacAddress | read-write | mandatory |
| staticPort OBJECT-TYPE The Static MAC forwarding port with the ID. | 1.3.6.1.4.1.171.10.75.2.21.3.1.3 | INTEGER | read-write | mandatory |
| staticVlanID OBJECT-TYPE The Static MAC VLAN ID with the ID. | 1.3.6.1.4.1.171.10.75.2.21.3.1.4 | INTEGER | read-write | mandatory |
| staticStatus OBJECT-TYPE The status of an entry in the Static MAC Table. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available. | 1.3.6.1.4.1.171.10.75.2.21.3.1.5 | INTEGER {active(1), notready(3), createAndwait(5), destroy(6)} | read-write | mandatory |
| companyIgsGroup OBJECT-IDENTITY | 1.3.6.1.4.1.171.10.75.2.22 | |||
| igsSystem OBJECT-IDENTITY | 1.3.6.1.4.1.171.10.75.2.22.1 | |||
| igsStatus OBJECT-TYPE Enables or disables IGMP snooping in the system. | 1.3.6.1.4.1.171.10.75.2.22.1.2 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| igsv3Processing OBJECT-TYPE To enable processing of IGMPv3 messages and to operate in IGMPv3 mode, this object must be set to enabled, when set as disabled the operation will be in IGMPv2 mode. | 1.3.6.1.4.1.171.10.75.2.22.1.3 | INTEGER {enabled(1), disabled(2)} | read-only | mandatory |
| igsRouterPortPurgeInterval OBJECT-TYPE This is the interval (in seconds) after which a learnt router port entry will be purged. For each router port learnt, a 'RouterPortPurgeTimer' runs for 'RouterPortPurgeInterval'. This timer will be restarted whenever a router control message is received over that port. If no router control mssages are received for 'RouterPortPurgeInterval' time, the learnt router port entry will be purged. | 1.3.6.1.4.1.171.10.75.2.22.1.4 | INTEGER (60..600) | read-write | mandatory |
| igsHostPortPurgeInterval OBJECT-TYPE This is the interval (in seconds) after which a learnt host port entry will be purged. For each host port learnt, a 'PortPurgeTimer' runs for 'HostPortPurgeInterval'. This timer will be restarted whenever a report message from host is received over that port. If no report mssages are received for 'HostPortPurgeInterval' time, the learnt host entry will be purged from the multicast group. | 1.3.6.1.4.1.171.10.75.2.22.1.5 | INTEGER (130..153025) | read-only | mandatory |
| igsReportForwardInterval OBJECT-TYPE This is the interval (in seconds) within which the next report messages for the same multicast group will not be forwarded out. The purpose of this timer is to avoid multiple report messages for the same group being forwarded out. So that unnecessary multicast packets in the network can be avoided. The 'ReportForwardTimer' is per multicast group. This timer is started as soon as a report message for that group is forwarded out. Within this 'ReportForwardInterval' if another report for the same group arrives, that report will not be forwarded. The first report message which is received for this group after the 'ReportForwardInterval' only will be forwarded out. When set as '0' , this timer will not be started and all the report messages will be forwarded as and when they are received. | 1.3.6.1.4.1.171.10.75.2.22.1.6 | INTEGER (0..25) | read-only | mandatory |
| igsLeaveProcessInterval OBJECT-TYPE This is the interval (in seconds) after which a Leave message is forwarded on either router port(if present) or on all ports of a bridge (if no router port present). when a leave message from a host for a group is received by the bridge, The bridge will form a group-specific query and sends it on the port on which the leave message is received. A timer is started by a bridge with a time interval equal to IgsLeaveProcessInterval. If a report message is received before above timer expires, Leave message is dropped.Otherwise Leave message is either forwarded on all ports of the bridge or only on router port depending upon the case. | 1.3.6.1.4.1.171.10.75.2.22.1.7 | INTEGER (0..25) | read-write | mandatory |
| igsMcastEntryAgeingInterval OBJECT-TYPE This is the interval (in seconds) after which the target will be checked for Multicast data hit for the entry This timer will be started for every (S, G) in the control plane. | 1.3.6.1.4.1.171.10.75.2.22.1.8 | INTEGER (60..600) | read-only | mandatory |
| igsSharedSegmentAggregationInterval OBJECT-TYPE This is the interval (in seconds) for which reports of IGMPv3 messages on a shared segment will be aggregated for a group. This timer will be started only when multiple hosts are identified on a port for the Multicast group. The timer will be stopped when all but one host is left on the port for the Multicast group. This timer will be re-started on its expiry and Multicast forwarding table will be updated. | 1.3.6.1.4.1.171.10.75.2.22.1.9 | INTEGER (0..60) | read-only | mandatory |
| igsGblReportFwdOnAllPorts OBJECT-TYPE IGMP snooping module will forward reports only on router ports by default, to enable forwarding on all other ports the object must be set to allports. | 1.3.6.1.4.1.171.10.75.2.22.1.10 | INTEGER {allports(1), rtrports(2)} | read-only | mandatory |
| igsNextMcastFwdMode OBJECT-TYPE This field describes the multicast forwarding mode that will be used upon restart of the ISS Switch. | 1.3.6.1.4.1.171.10.75.2.22.1.13 | INTEGER {ipbased(1), macbased(2)} | read-only | mandatory |
| igsQueryInterval OBJECT-TYPE The frequency at which IGMP Host-Query packets are transmitted on this interface. | 1.3.6.1.4.1.171.10.75.2.22.1.14 | INTEGER (60..600) | read-write | mandatory |
| igsQueryMaxResponseTime OBJECT-TYPE The maximum query response time advertised in IGMPv2 queries on this interface. | 1.3.6.1.4.1.171.10.75.2.22.1.15 | INTEGER (10..25) | read-write | mandatory |
| igsRobustnessValue OBJECT-TYPE The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses. | 1.3.6.1.4.1.171.10.75.2.22.1.16 | INTEGER (2..255) | read-write | mandatory |
| igsLastMembQueryInterval OBJECT-TYPE The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group. The value of this object is irrelevant if igmpInterfaceVersion is 1. | 1.3.6.1.4.1.171.10.75.2.22.1.17 | INTEGER (1..25) | read-write | mandatory |
| igsQuerierStateOnOff OBJECT-TYPE To enable transmitting IGMP Query packets or to disable. | 1.3.6.1.4.1.171.10.75.2.22.1.18 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| igsVlan OBJECT-IDENTITY | 1.3.6.1.4.1.171.10.75.2.22.3 | |||
| igsVlanMcastFwdTable OBJECT-TYPE This table contains VLAN based multicast forwarding information learnt when VLAN is ENABLED in the system. | 1.3.6.1.4.1.171.10.75.2.22.3.1 | not-accessible | mandatory | |
| igsVlanMcastFwdEntry OBJECT-TYPE This table contains VlanId, multicast group address and the list of ports who have members for the multicast group. | 1.3.6.1.4.1.171.10.75.2.22.3.1.1 | not-accessible | mandatory | |
| igsVlanMcastFwdVlanIdMac OBJECT-TYPE Vlan Id pertaining to the Multicast forwarding entry. | 1.3.6.1.4.1.171.10.75.2.22.3.1.1.1 | INTEGER (1..4094) | not-accessible | mandatory |
| igsVlanMcastFwdGroupAddress OBJECT-TYPE MAC multicast group address. | 1.3.6.1.4.1.171.10.75.2.22.3.1.1.2 | MacAddress | not-accessible | mandatory |
| igsVlanMcastFwdPortListMac OBJECT-TYPE List of ports who have members for the MAC multicast group and the Vlan Id. | 1.3.6.1.4.1.171.10.75.2.22.3.1.1.3 | PortList | read-only | mandatory |
| igsVlanRouterPortListTable OBJECT-TYPE This table contains list of bridge ports through which a router, in a particular VLAN, is reachable. | 1.3.6.1.4.1.171.10.75.2.22.3.3 | not-accessible | mandatory | |
| igsVlanRouterPortListEntry OBJECT-TYPE Contains VlanId of router , list of reachable router ports. | 1.3.6.1.4.1.171.10.75.2.22.3.3.1 | not-accessible | mandatory | |
| igsVlanRouterPortListVlanId OBJECT-TYPE Vlan Id of the ports through which router is reachable. | 1.3.6.1.4.1.171.10.75.2.22.3.3.1.1 | INTEGER (1..4094) | not-accessible | mandatory |
| igsVlanRouterPortList OBJECT-TYPE Contains list of bridge ports through which a router, in a particular VLAN, is reachable. These router ports are learnt through control messages received from routers, and can also be configured statically. | 1.3.6.1.4.1.171.10.75.2.22.3.3.1.2 | PortList | read-only | mandatory |
| igsVlanFilterTable OBJECT-TYPE This table contains configuration to disable IGMP snooping on specific Vlans. This Table is valid only when VLAN is enabled in the system. | 1.3.6.1.4.1.171.10.75.2.22.3.4 | not-accessible | mandatory | |
| igsVlanFilterEntry OBJECT-TYPE Contains Vlan Id , Vlan Filter Status. | 1.3.6.1.4.1.171.10.75.2.22.3.4.1 | not-accessible | mandatory | |
| igsVlanId OBJECT-TYPE Vlan Id for which IGMP snooping feature is to be disabled. | 1.3.6.1.4.1.171.10.75.2.22.3.4.1.1 | INTEGER (1..4094) | not-accessible | mandatory |
| igsVlanFilterStatus OBJECT-TYPE When status is set as enabled, IGMP snooping feature is disabled for that Vlan Id. When status is set as disabled, the entry stands invalid. In that case IGMP snooping feature remains enabled for that Vlan. | 1.3.6.1.4.1.171.10.75.2.22.3.4.1.2 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| companyDot1xGroup OBJECT-IDENTITY | 1.3.6.1.4.1.171.10.75.2.23 | |||
| radius OBJECT-IDENTITY | 1.3.6.1.4.1.171.10.75.2.23.1 | |||
| radiusServerAddress OBJECT-TYPE The IP address of the RADIUS server. | 1.3.6.1.4.1.171.10.75.2.23.1.1 | IpAddress | read-write | mandatory |
| radiusServerPort OBJECT-TYPE The Port of the RADIUS server. | 1.3.6.1.4.1.171.10.75.2.23.1.2 | INTEGER (1..65535) | read-write | mandatory |
| radiusServerSharedSecret OBJECT-TYPE The secret string which is shared between Server and Client. | 1.3.6.1.4.1.171.10.75.2.23.1.3 | DisplayString | read-write | mandatory |
| dot1xAuth OBJECT-IDENTITY | 1.3.6.1.4.1.171.10.75.2.23.2 | |||
| dot1xAuthSystemControl OBJECT-TYPE Enable/Disable Static 802.1x. A (1) enables, a (2) disables. | 1.3.6.1.4.1.171.10.75.2.23.2.1 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| dot1xAuthQuietPeriod OBJECT-TYPE The value, in seconds, of the quietPeriod constant currently in use by the Authenticator PAE state machine. | 1.3.6.1.4.1.171.10.75.2.23.2.2 | INTEGER (0..65535) | read-write | mandatory |
| dot1xAuthTxPeriod OBJECT-TYPE The value, in seconds, of the txPeriod constant currently in use by the Authenticator PAE state machine. | 1.3.6.1.4.1.171.10.75.2.23.2.3 | INTEGER (1..65535) | read-write | mandatory |
| dot1xAuthSuppTimeout OBJECT-TYPE The value, in seconds, of the suppTimeout constant currently in use by the Backend Authentication state machine. | 1.3.6.1.4.1.171.10.75.2.23.2.4 | INTEGER (1..65535) | read-write | mandatory |
| dot1xAuthServerTimeout OBJECT-TYPE The value, in seconds, of the serverTimeout constant currently in use by the Backend Authentication state machine. | 1.3.6.1.4.1.171.10.75.2.23.2.5 | INTEGER (1..65535) | read-write | mandatory |
| dot1xAuthMaxReq OBJECT-TYPE The value of the maxReq constant currently in use by the Backend Authentication state machine. | 1.3.6.1.4.1.171.10.75.2.23.2.6 | INTEGER (1..10) | read-write | mandatory |
| dot1xAuthReAuthPeriod OBJECT-TYPE The value, in seconds, of the reAuthPeriod constant currently in use by the Reauthentication Timer state machine. | 1.3.6.1.4.1.171.10.75.2.23.2.7 | Unsigned32 (1..4294967295) | read-write | mandatory |
| dot1xAuthReAuthEnabled OBJECT-TYPE The enable/disable control used by the Reauthentication Timer state machine (8.5.5.1). | 1.3.6.1.4.1.171.10.75.2.23.2.8 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| dot1xAuthConfigPortTable OBJECT-TYPE A table that contains the configuration objects for the Authenticator PAE associated with each port. An entry appears in this table for each port that may authenticate access to itself. | 1.3.6.1.4.1.171.10.75.2.23.2.9 | not-accessible | mandatory | |
| dot1xAuthConfigPortEntry OBJECT-TYPE The configuration information for an Authenticator Port. | 1.3.6.1.4.1.171.10.75.2.23.2.9.1 | not-accessible | mandatory | |
| dot1xAuthConfigPortNumber OBJECT-TYPE A unique value for each interface that correlates to ifIndex. Its value ranges between 1 and the value of ifNumber. | 1.3.6.1.4.1.171.10.75.2.23.2.9.1.1 | INTEGER | read-only | mandatory |
| dot1xAuthConfigPortControl OBJECT-TYPE The current value of the controlled Port control parameter for the Port. | 1.3.6.1.4.1.171.10.75.2.23.2.9.1.2 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| dot1xAuthConfigPortStatus OBJECT-TYPE The current value of the controlled Port status parameter for the Port. | 1.3.6.1.4.1.171.10.75.2.23.2.9.1.3 | INTEGER {authnull(0), authorized(1), unauthorized(2)} | read-only | mandatory |
| dot1xAuthConfigPortSessionTime OBJECT-TYPE The duration of the session in seconds. | 1.3.6.1.4.1.171.10.75.2.23.2.9.1.4 | TimeTicks | read-only | mandatory |
| dot1xAuthConfigPortSessionUserName OBJECT-TYPE The User-Name representing the identity of the Supplicant PAE. | 1.3.6.1.4.1.171.10.75.2.23.2.9.1.5 | DisplayString | read-only | mandatory |
| companyQoSGroup OBJECT-IDENTITY | 1.3.6.1.4.1.171.10.75.2.26 | |||
| qosMode OBJECT-TYPE Settings of Qos mode: IEEE 802.1p QoS or DSCP QoS. | 1.3.6.1.4.1.171.10.75.2.26.1 | INTEGER {dot1p(1), dscp(2)} | read-write | mandatory |
| queuingMechanism OBJECT-TYPE Queuing mechanism. strictPriority(1) : Strict Priority wrr(2) : Weighted Round Robin | 1.3.6.1.4.1.171.10.75.2.26.2 | INTEGER {strictPriority(1), wrr(2)} | read-write | mandatory |
| dot1pPortTable OBJECT-TYPE A list of 802.1p port default priority Entries. | 1.3.6.1.4.1.171.10.75.2.26.3 | not-accessible | mandatory | |
| dot1pPortEntry OBJECT-TYPE A list of 802.1p port default priority priorities. | 1.3.6.1.4.1.171.10.75.2.26.3.1 | not-accessible | mandatory | |
| dot1pPortIndex OBJECT-TYPE A port identifier that is in the range of 1 to ifNumber. | 1.3.6.1.4.1.171.10.75.2.26.3.1.1 | INTEGER | read-only | mandatory |
| dot1pPortPriority OBJECT-TYPE For ingress untagged packets, the per port 'Default Priority' setting will be applied to packets of each port to provide port-based traffic prioritization. For ingress tagged packets, D-Link Smart Switches will refer to their 802.1p information and prioritize them with 4 different priority queues. | 1.3.6.1.4.1.171.10.75.2.26.3.1.2 | INTEGER {low(1), middle(2), high(3), highest(4)} | read-write | mandatory |
| dscpTable OBJECT-TYPE A list of DSCP Entries. | 1.3.6.1.4.1.171.10.75.2.26.4 | not-accessible | mandatory | |
| dscpEntry OBJECT-TYPE A list of DSCP properties. | 1.3.6.1.4.1.171.10.75.2.26.4.1 | not-accessible | mandatory | |
| dscpIndex OBJECT-TYPE DSCP value. For ingress IP packets, the DiffServ field of IP packets provide DSCP-based traffic prioritization information to switches. D-Link Smart Switches will refer to the value of DiffServ filed information and prioritize them with 4 different priority queues. | 1.3.6.1.4.1.171.10.75.2.26.4.1.1 | INTEGER (0..63) | read-only | mandatory |
| dscpPriority OBJECT-TYPE The queuing priority mapping to DSCP value. | 1.3.6.1.4.1.171.10.75.2.26.4.1.2 | INTEGER {low(1), middle(2), high(3), highest(4)} | read-write | mandatory |
| companyTrafficMgmt OBJECT-IDENTITY | 1.3.6.1.4.1.171.10.75.2.27 | |||
| broadcastStormCtrlSettings OBJECT-IDENTITY | 1.3.6.1.4.1.171.10.75.2.27.3 | |||
| broadcastStormCtrlGlobalOnOff OBJECT-TYPE This object indicates storm control function is enabled or disabled for device. When you enable broadcast storm control function, D-Link Smart Switches will allowed you to limit the number of broadcast packets per second going through device. | 1.3.6.1.4.1.171.10.75.2.27.3.1 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| broadcastStormGlobalThreshold OBJECT-TYPE The threshold value in unit of thousand bytes per second for broadcast traffic of the specific port. | 1.3.6.1.4.1.171.10.75.2.27.3.2 | INTEGER {disabled(1), kBps-8(2), kBps-16(3), kBps-32(4), kBps-64(5), kBps-128(6), kBps-256(7), kBps-512(8), kBps-1024(9), kBps-2048(10), kBps-4096(11)} | read-write | mandatory |
| companySecurity OBJECT-IDENTITY | 1.3.6.1.4.1.171.10.75.2.28 | |||
| trustedHostSettings OBJECT-IDENTITY | 1.3.6.1.4.1.171.10.75.2.28.1 | |||
| trustedHostOnOff OBJECT-TYPE This object indicates trusted host function is enabled or disabled. When trusted host function is enabled, D-Link Smart Switches will only allow hosts which you trust to access and control the switch. Your local host IP Addresses must be one of the IP Addresses to avoid disconnection. | 1.3.6.1.4.1.171.10.75.2.28.1.1 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| trustedHostTable OBJECT-TYPE A list of Trusted Host Entries. | 1.3.6.1.4.1.171.10.75.2.28.1.2 | not-accessible | mandatory | |
| trustedHostEntry OBJECT-TYPE A list of Trusted Host properties. | 1.3.6.1.4.1.171.10.75.2.28.1.2.1 | not-accessible | mandatory | |
| trustedHostID OBJECT-TYPE An index that uniquely identifies an entry in the Trusted Host Table. Three entries are currently supported. | 1.3.6.1.4.1.171.10.75.2.28.1.2.1.1 | INTEGER | read-only | mandatory |
| trustedHostIpAddress OBJECT-TYPE The IP address of host you allow to access to D-Link Smart Switch. Your local host IP Addresses must be one of the IP Addresses to avoid disconnection. | 1.3.6.1.4.1.171.10.75.2.28.1.2.1.2 | IpAddress | read-write | mandatory |
| trustedHostIpMask OBJECT-TYPE Used to mask with IP address, it allow you set a subnet as a trusted host entry. | 1.3.6.1.4.1.171.10.75.2.28.1.2.1.3 | IpAddress | read-write | mandatory |
| trustedHostStatus OBJECT-TYPE The status of an entry in the Trusted Host Table. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available. | 1.3.6.1.4.1.171.10.75.2.28.1.2.1.4 | INTEGER {active(1), notready(3), createAndwait(5), destroy(6)} | read-write | mandatory |
Notifications
| Name | OID | Status |
|---|---|---|
| swFiberInsert NOTIFICATION-TYPE Fiber insert trap. | 1.3.6.1.4.1.171.10.75.2.0.1 | |
| swFiberRemove NOTIFICATION-TYPE Fiber remove trap. | 1.3.6.1.4.1.171.10.75.2.0.2 | |
| swFiberAbnormalRXError NOTIFICATION-TYPE Fiber abnormal rx error trap. | 1.3.6.1.4.1.171.10.75.2.0.3 | |
| swFiberAbnormalTXError NOTIFICATION-TYPE Fiber abnormal tx error trap. | 1.3.6.1.4.1.171.10.75.2.0.4 | |
| swTPAbnormalRXError NOTIFICATION-TYPE Twisted Pair abnormal rx error trap. | 1.3.6.1.4.1.171.10.75.2.0.5 | |
| swTPAbnormalTXError NOTIFICATION-TYPE Twisted Pair abnormal tx error trap. | 1.3.6.1.4.1.171.10.75.2.0.6 |