DELLBASEBOARDMIF-MIB
- Registered at
- 1.3.6.1.4.1.674.10890
- Namespace
- dell
- Source file
DELLBASEBOARDMIF-MIB- Digest
sha256:184de7c6e53a62a48f9cc430ab899185ae585ab3f525435ce9a6f97100da563b
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, enterprises, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
DELLBASEBOARDMIF-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Under this module's arcs
Where the registration tree carries on below this module.
| Arc | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.674.10890.3 | localresponseagent | DELLLOCALRESPONSEAGENTMIF-MIB |
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| DmiComponentIndex type | ||||
| DmiDate type | ||||
| DmiDisplaystring type | ||||
| DmiInteger type | ||||
| DmiOctetstring type |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| dell OBJECT-IDENTITY | 1.3.6.1.4.1.674 | |||
| server OBJECT-IDENTITY | 1.3.6.1.4.1.674.10890 | |||
| baseboard OBJECT-IDENTITY | 1.3.6.1.4.1.674.10890.1 | |||
| dmtfGroups OBJECT-IDENTITY | 1.3.6.1.4.1.674.10890.1.1 | |||
| tComponentid OBJECT-TYPE This group defines attributes common to all components. | 1.3.6.1.4.1.674.10890.1.1.1 | not-accessible | mandatory | |
| eComponentid OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.1.1 | not-accessible | mandatory | |
| a1Manufacturer OBJECT-TYPE The name of the manufacturer that produced this component. | 1.3.6.1.4.1.674.10890.1.1.1.1.1 | DmiDisplaystring | read-only | mandatory |
| a1Product OBJECT-TYPE The name of the component. | 1.3.6.1.4.1.674.10890.1.1.1.1.2 | DmiDisplaystring | read-only | mandatory |
| a1Version OBJECT-TYPE The version for the component. | 1.3.6.1.4.1.674.10890.1.1.1.1.3 | DmiDisplaystring | read-only | mandatory |
| a1SerialNumber OBJECT-TYPE The serial number for this instance of this component. | 1.3.6.1.4.1.674.10890.1.1.1.1.4 | DmiDisplaystring | read-only | mandatory |
| a1Installation OBJECT-TYPE The time & date of the lastest installation of this component. | 1.3.6.1.4.1.674.10890.1.1.1.1.5 | DmiDate | read-only | mandatory |
| a1Verify OBJECT-TYPE A code that provides a level of verification that the component is still installed and working. | 1.3.6.1.4.1.674.10890.1.1.1.1.6 | INTEGER {vAnErrorOccurredCheckStatusCode(0), vThisComponentDoesNotExist(1), vTheVerifyIsNotSupported(2), vReserved(3), vThisComponentExistsButTheFunctionalityI(4), vThisComponentExistsButTheFunctionality1(5), vThisComponentExistsAndIsNotFunctioningC(6), vThisComponentExistsAndIsFunctioningCorr(7)} | read-only | mandatory |
| tTemperature OBJECT-TYPE This group defines the attributes for the temperature probes this system. | 1.3.6.1.4.1.674.10890.1.1.2 | not-accessible | mandatory | |
| eTemperature OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.2.1 | not-accessible | mandatory | |
| a2Tempparentindex OBJECT-TYPE An index into the chassis table. | 1.3.6.1.4.1.674.10890.1.1.2.1.1 | DmiInteger | read-only | mandatory |
| a2Tempindex OBJECT-TYPE index into this temperature probe table. | 1.3.6.1.4.1.674.10890.1.1.2.1.2 | DmiInteger | read-only | mandatory |
| a2Temptype OBJECT-TYPE Defines the type of the temperature probe. | 1.3.6.1.4.1.674.10890.1.1.2.1.3 | INTEGER {vOther(1), vUnknown(2), vTmc(3), vTvm(4), vEsm(5), vBackplane(6), vHarrierBackplane(7)} | read-only | mandatory |
| a2Tempstatus OBJECT-TYPE Current status of the temperature probe. | 1.3.6.1.4.1.674.10890.1.1.2.1.4 | INTEGER {vOther(1), vUnknown(2), vOk(3), vNon-critical(4), vCritical(5), vNon-recoverable(6)} | read-only | mandatory |
| a2Tempreading OBJECT-TYPE The reading of the temperature probe in tenths of degrees. | 1.3.6.1.4.1.674.10890.1.1.2.1.5 | DmiInteger | read-only | mandatory |
| a2Tempminwarn OBJECT-TYPE The lower warning threshold for the temperature probe set by the user. | 1.3.6.1.4.1.674.10890.1.1.2.1.6 | DmiDisplaystring | read-write | mandatory |
| a2Tempmaxwarn OBJECT-TYPE The upper warning threshold for the temperature probe set by the user. | 1.3.6.1.4.1.674.10890.1.1.2.1.7 | DmiDisplaystring | read-write | mandatory |
| a2Tempminfail OBJECT-TYPE The lower failure threshold for the temperature probe. | 1.3.6.1.4.1.674.10890.1.1.2.1.8 | DmiInteger | read-only | mandatory |
| a2Tempmaxfail OBJECT-TYPE The upper failure threshold for the temperature probe. | 1.3.6.1.4.1.674.10890.1.1.2.1.9 | DmiInteger | read-only | mandatory |
| a2Templocation OBJECT-TYPE The location of this temperature probe within the system. | 1.3.6.1.4.1.674.10890.1.1.2.1.10 | DmiDisplaystring | read-only | mandatory |
| tFan OBJECT-TYPE This group defines the attributes for the fan probes this system. | 1.3.6.1.4.1.674.10890.1.1.3 | not-accessible | mandatory | |
| eFan OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.3.1 | not-accessible | mandatory | |
| a3Fansparentindex OBJECT-TYPE An index into the chassis table. | 1.3.6.1.4.1.674.10890.1.1.3.1.1 | DmiInteger | read-only | mandatory |
| a3Fansindex OBJECT-TYPE index into this fan probe table. | 1.3.6.1.4.1.674.10890.1.1.3.1.2 | DmiInteger | read-only | mandatory |
| a3Fanstype OBJECT-TYPE Defines the type of the fan probe. | 1.3.6.1.4.1.674.10890.1.1.3.1.3 | INTEGER {vOther(1), vUnknown(2), vBoolean(3), vRpm(4)} | read-only | mandatory |
| a3Fansstatus OBJECT-TYPE Current status of the fan probe. | 1.3.6.1.4.1.674.10890.1.1.3.1.4 | INTEGER {vOther(1), vUnknown(2), vOk(3), vNon-critical(4), vCritical(5), vNon-recoverable(6)} | read-only | mandatory |
| a3Fansreading OBJECT-TYPE The reading of the fan probe in RPM (or boolean). | 1.3.6.1.4.1.674.10890.1.1.3.1.5 | DmiInteger | read-only | mandatory |
| a3Fanswarningmin OBJECT-TYPE The lower warning threshold for the fan probe set by the user. | 1.3.6.1.4.1.674.10890.1.1.3.1.6 | DmiDisplaystring | read-write | mandatory |
| a3Fansmaxwarn OBJECT-TYPE The upper warning threshold for the fan probe set by the user. | 1.3.6.1.4.1.674.10890.1.1.3.1.7 | DmiDisplaystring | read-write | mandatory |
| a3Fansminfail OBJECT-TYPE The lower failure threshold for the fan probe. | 1.3.6.1.4.1.674.10890.1.1.3.1.8 | DmiInteger | read-only | mandatory |
| a3Fansmaxfail OBJECT-TYPE The upper failure threshold for the fan probe. | 1.3.6.1.4.1.674.10890.1.1.3.1.9 | DmiInteger | read-only | mandatory |
| a3Fanslocation OBJECT-TYPE The location of this fan probe within the system. | 1.3.6.1.4.1.674.10890.1.1.3.1.10 | DmiDisplaystring | read-only | mandatory |
| tVoltage OBJECT-TYPE The Voltage group contains the data on all the voltage probes in a system. | 1.3.6.1.4.1.674.10890.1.1.4 | not-accessible | mandatory | |
| eVoltage OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.4.1 | not-accessible | mandatory | |
| a4Voltparentindex OBJECT-TYPE The chassis this voltage probe is connected to. | 1.3.6.1.4.1.674.10890.1.1.4.1.1 | DmiInteger | read-only | mandatory |
| a4Voltindex OBJECT-TYPE the index of the voltage probe within the chassis. | 1.3.6.1.4.1.674.10890.1.1.4.1.2 | DmiInteger | read-only | mandatory |
| a4Volttype OBJECT-TYPE The type of voltage probe | 1.3.6.1.4.1.674.10890.1.1.4.1.3 | INTEGER {vOther(1), vUnknown(2), v-3-3v(3), v3-3v(4), v-5v(5), v5v(6), v-12v(7), v12v(8), v15v(9), vCore(10)} | read-only | mandatory |
| a4Voltstatus OBJECT-TYPE Status of the voltage probe. | 1.3.6.1.4.1.674.10890.1.1.4.1.4 | INTEGER {vOther(1), vUnknown(2), vOk(3), vNon-critical(4), vCritical(5), vNon-recoverable(6)} | read-only | mandatory |
| a4Voltreading OBJECT-TYPE Current reading of the voltage probe, in millivolts. | 1.3.6.1.4.1.674.10890.1.1.4.1.5 | DmiInteger | read-only | mandatory |
| a4Voltminwarn OBJECT-TYPE lower warning threshold value for this voltage probe. | 1.3.6.1.4.1.674.10890.1.1.4.1.6 | DmiDisplaystring | read-write | mandatory |
| a4Voltmaxwarn OBJECT-TYPE upper warning threshold value for this voltage probe. | 1.3.6.1.4.1.674.10890.1.1.4.1.7 | DmiDisplaystring | read-write | mandatory |
| a4Voltminfail OBJECT-TYPE lower failure threshold value for this voltage probe. | 1.3.6.1.4.1.674.10890.1.1.4.1.8 | DmiInteger | read-only | mandatory |
| a4Voltmaxfail OBJECT-TYPE upper failure threshold value for this voltage probe. | 1.3.6.1.4.1.674.10890.1.1.4.1.9 | DmiInteger | read-only | mandatory |
| a4Voltlocation OBJECT-TYPE the location of this voltage probe within the system. | 1.3.6.1.4.1.674.10890.1.1.4.1.10 | DmiDisplaystring | read-only | mandatory |
| tCurrent OBJECT-TYPE The Current group contains the data on all the Current probes in a system. | 1.3.6.1.4.1.674.10890.1.1.5 | not-accessible | mandatory | |
| eCurrent OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.5.1 | not-accessible | mandatory | |
| a5Ampparentindex OBJECT-TYPE The chassis this current probe is connected to. | 1.3.6.1.4.1.674.10890.1.1.5.1.1 | DmiInteger | read-only | mandatory |
| a5Ampindex OBJECT-TYPE the index of the current probe within the chassis. | 1.3.6.1.4.1.674.10890.1.1.5.1.2 | DmiInteger | read-only | mandatory |
| a5Amptype OBJECT-TYPE The type of current probe | 1.3.6.1.4.1.674.10890.1.1.5.1.3 | INTEGER {vOther(1), vUnknown(2), v-3-3v(3), v3-3v(4), v-5v(5), v5v(6), v-12v(7), v12v(8)} | read-only | mandatory |
| a5Ampstatus OBJECT-TYPE Status of the current probe. | 1.3.6.1.4.1.674.10890.1.1.5.1.4 | INTEGER {vOther(1), vUnknown(2), vOk(3), vNon-critical(4), vCritical(5), vNon-recoverable(6)} | read-only | mandatory |
| a5Ampreading OBJECT-TYPE Current reading of the current probe in milliamps. | 1.3.6.1.4.1.674.10890.1.1.5.1.5 | DmiInteger | read-only | mandatory |
| a5Ampminwarn OBJECT-TYPE lower warning threshold value for this current probe. | 1.3.6.1.4.1.674.10890.1.1.5.1.6 | DmiDisplaystring | read-write | mandatory |
| a5Ampmaxwarn OBJECT-TYPE upper warning threshold value for this current probe. | 1.3.6.1.4.1.674.10890.1.1.5.1.7 | DmiDisplaystring | read-write | mandatory |
| a5Ampminfail OBJECT-TYPE lower failure threshold value for this current probe. | 1.3.6.1.4.1.674.10890.1.1.5.1.8 | DmiInteger | read-only | mandatory |
| a5Ampmaxfail OBJECT-TYPE upper failure threshold value for this current probe. | 1.3.6.1.4.1.674.10890.1.1.5.1.9 | DmiInteger | read-only | mandatory |
| a5Amplocation OBJECT-TYPE the location of this current probe within the system. | 1.3.6.1.4.1.674.10890.1.1.5.1.10 | DmiDisplaystring | read-only | mandatory |
| tPowerSupply OBJECT-TYPE The Power Supply group contains the data on all the redundant power supplies in a system. | 1.3.6.1.4.1.674.10890.1.1.6 | not-accessible | mandatory | |
| ePowerSupply OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.6.1 | not-accessible | mandatory | |
| a6Pwrsupplyparentindex OBJECT-TYPE The chassis this power supply is connected to. | 1.3.6.1.4.1.674.10890.1.1.6.1.1 | DmiInteger | read-only | mandatory |
| a6Pwrsupplyindex OBJECT-TYPE The index within the chassis of this power supply. | 1.3.6.1.4.1.674.10890.1.1.6.1.2 | DmiInteger | read-only | mandatory |
| a6Pwrsupplytype OBJECT-TYPE The type of power supply. | 1.3.6.1.4.1.674.10890.1.1.6.1.3 | INTEGER {vOther(1), vUnknown(2), vPspb(3), v230w(4), v500w(5), v700w(6), v320w(7), v275w(8)} | read-only | mandatory |
| a6Pwrsupplystatus OBJECT-TYPE The current status of this power supply. | 1.3.6.1.4.1.674.10890.1.1.6.1.4 | INTEGER {vOther(1), vUnknown(2), vOk(3), vNon-critical(4), vCritical(5), vNon-recoverable(6)} | read-only | mandatory |
| a6Pwrsupplyonline OBJECT-TYPE The current online status of this power supply. Setting this value to FALSE will turn off the power supply, setting it to TRUE will turn on the power supply. | 1.3.6.1.4.1.674.10890.1.1.6.1.5 | DmiDisplaystring | read-write | mandatory |
| a6Pwrlocation OBJECT-TYPE the location of this power supply within the system. | 1.3.6.1.4.1.674.10890.1.1.6.1.6 | DmiDisplaystring | read-only | mandatory |
| tGlobalPowerUnit OBJECT-TYPE This group contains the global status for the power supplies in the system. | 1.3.6.1.4.1.674.10890.1.1.7 | not-accessible | mandatory | |
| eGlobalPowerUnit OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.7.1 | not-accessible | mandatory | |
| a7Pwrunitstatus OBJECT-TYPE The current redundancy status of the power unit. | 1.3.6.1.4.1.674.10890.1.1.7.1.1 | INTEGER {vOther(1), vUnknown(2), vNotApplicableUnitNotRedundant(3), vOffline(4), vFullyRedundant(5), vDegradedRedundancy(6), vRedundancyLost(7)} | read-only | mandatory |
| a7Pwrunitgloballevel OBJECT-TYPE The current global power level usage, in percent. | 1.3.6.1.4.1.674.10890.1.1.7.1.2 | DmiInteger | read-only | mandatory |
| a7Pwrunitglobalmaxwarn OBJECT-TYPE Warning threshold, in percent | 1.3.6.1.4.1.674.10890.1.1.7.1.3 | DmiDisplaystring | read-write | mandatory |
| a7Pwrunitlevel33v OBJECT-TYPE The current 3.3v power level usage, in percent. | 1.3.6.1.4.1.674.10890.1.1.7.1.4 | DmiInteger | read-only | mandatory |
| a7Pwrunitmaxwarn33v OBJECT-TYPE Warning threshold, in percent | 1.3.6.1.4.1.674.10890.1.1.7.1.5 | DmiDisplaystring | read-write | mandatory |
| a7Pwrunitlevel5v OBJECT-TYPE The current 5v power level usage, in percent. | 1.3.6.1.4.1.674.10890.1.1.7.1.6 | DmiInteger | read-only | mandatory |
| a7Pwrunitmaxwarn5v OBJECT-TYPE Warning threshold, in percent | 1.3.6.1.4.1.674.10890.1.1.7.1.7 | DmiDisplaystring | read-write | mandatory |
| a7Pwrunitlevel12v OBJECT-TYPE The current 12v power level usage, in percent. | 1.3.6.1.4.1.674.10890.1.1.7.1.8 | DmiInteger | read-only | mandatory |
| a7Pwrunitmaxwarn12v OBJECT-TYPE Warning threshold, in percent | 1.3.6.1.4.1.674.10890.1.1.7.1.9 | DmiDisplaystring | read-write | mandatory |
| a7Pwrunituid OBJECT-TYPE The unique ID for this power supply unit. | 1.3.6.1.4.1.674.10890.1.1.7.1.10 | DmiDisplaystring | read-only | mandatory |
| a7Pwrunitindex OBJECT-TYPE The index into the power supply unit table. | 1.3.6.1.4.1.674.10890.1.1.7.1.11 | DmiInteger | read-only | mandatory |
| tChassisExtension OBJECT-TYPE Global status of devices in chassis. | 1.3.6.1.4.1.674.10890.1.1.8 | not-accessible | mandatory | |
| eChassisExtension OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.8.1 | not-accessible | mandatory | |
| a8Chassindex OBJECT-TYPE Physical container index | 1.3.6.1.4.1.674.10890.1.1.8.1.1 | DmiInteger | read-only | mandatory |
| a8Chassglobstatus OBJECT-TYPE Global status of all devices in chassis. | 1.3.6.1.4.1.674.10890.1.1.8.1.2 | INTEGER {vOther(1), vUnknown(2), vOk(3), vNon-critical(4), vCritical(5), vNon-recoverable(6)} | read-only | mandatory |
| a8Chasstempstatus OBJECT-TYPE Global status of temperature probes. | 1.3.6.1.4.1.674.10890.1.1.8.1.3 | INTEGER {vOther(1), vUnknown(2), vOk(3), vNon-critical(4), vCritical(5), vNon-recoverable(6)} | read-only | mandatory |
| a8Chasstempprobes OBJECT-TYPE This contains the statuses of all temp probes in the system, one probe per octet. The value of each octet is the value of the status field. | 1.3.6.1.4.1.674.10890.1.1.8.1.4 | DmiOctetstring | read-only | mandatory |
| a8Chassfansstatus OBJECT-TYPE Global status of fan sensors. | 1.3.6.1.4.1.674.10890.1.1.8.1.5 | INTEGER {vOther(1), vUnknown(2), vOk(3), vNon-critical(4), vCritical(5), vNon-recoverable(6)} | read-only | mandatory |
| a8Chassfansprobes OBJECT-TYPE This contains the statuses of all fan probes in the system, one probe per octet. The value of each octet is the value of the status field. | 1.3.6.1.4.1.674.10890.1.1.8.1.6 | DmiOctetstring | read-only | mandatory |
| a8Chassvoltstatus OBJECT-TYPE Global status of voltage probes. | 1.3.6.1.4.1.674.10890.1.1.8.1.7 | INTEGER {vOther(1), vUnknown(2), vOk(3), vNon-critical(4), vCritical(5), vNon-recoverable(6)} | read-only | mandatory |
| a8Chassvoltprobes OBJECT-TYPE This contains the statuses of all volt probes in the system, one probe per octet. The value of each octet is the value of the status field. | 1.3.6.1.4.1.674.10890.1.1.8.1.8 | DmiOctetstring | read-only | mandatory |
| a8Chassampstatus OBJECT-TYPE Global status of current probes. | 1.3.6.1.4.1.674.10890.1.1.8.1.9 | INTEGER {vOther(1), vUnknown(2), vOk(3), vNon-critical(4), vCritical(5), vNon-recoverable(6)} | read-only | mandatory |
| a8Chassampprobes OBJECT-TYPE This contains the statuses of all amp probes in the system, one probe per octet. The value of each octet is the value of the status field. | 1.3.6.1.4.1.674.10890.1.1.8.1.10 | DmiOctetstring | read-only | mandatory |
| a8Chasspsstatus OBJECT-TYPE Global status of power supplies. | 1.3.6.1.4.1.674.10890.1.1.8.1.11 | INTEGER {vOther(1), vUnknown(2), vOk(3), vNon-critical(4), vCritical(5), vNon-recoverable(6)} | read-only | mandatory |
| a8Chasspwrsupplies OBJECT-TYPE This contains the statuses of all power supplies in the system, one probe per octet. The value of each octet is the value of the status field. | 1.3.6.1.4.1.674.10890.1.1.8.1.12 | DmiOctetstring | read-only | mandatory |
| a8Chassservicetag OBJECT-TYPE This is the service tag for this chassis, if it exists. | 1.3.6.1.4.1.674.10890.1.1.8.1.13 | DmiDisplaystring | read-only | mandatory |
| a8Chassuid OBJECT-TYPE This is the Unique ID for this chassis, if it exists. | 1.3.6.1.4.1.674.10890.1.1.8.1.14 | DmiDisplaystring | read-only | mandatory |
| a8Chassbackplaneuid OBJECT-TYPE This is the Unique ID for the backplane in this chassis. | 1.3.6.1.4.1.674.10890.1.1.8.1.15 | DmiDisplaystring | read-only | mandatory |
| a8Chassidentify OBJECT-TYPE This attribute is used to visually identify a disk pod or other chassis by causing its lights to flash. Setting this value to non-zero turns on the identify, setting it back to zero turns it off. | 1.3.6.1.4.1.674.10890.1.1.8.1.16 | DmiDisplaystring | read-write | mandatory |
| a8Chassfancontrol OBJECT-TYPE This attribute is used to control the fan speed in a chassis. If the value is 0, then fan control is notavailable. A value of 2 indicates maximum cooling. Avalue of 1 indicates minimize fan noise (and speed). | 1.3.6.1.4.1.674.10890.1.1.8.1.17 | DmiDisplaystring | read-write | mandatory |
| a8Chassledconfig OBJECT-TYPE This attribute is used to configure which fault conditionscause the fault LED to flash. If the value is 0, thenthis feature is not available. A value of 16 indicatesflash for failure conditions. A value of 8 indicatesfla h for failure and warning conditions. | 1.3.6.1.4.1.674.10890.1.1.8.1.18 | DmiDisplaystring | read-write | mandatory |
| a8Chassfaultclear OBJECT-TYPE This attribute is used to clear the hard drive fault LED.If this value is non-zero, then it is available. Writingany value to this attribut will clear the hard drive faultLED. | 1.3.6.1.4.1.674.10890.1.1.8.1.19 | DmiDisplaystring | read-write | mandatory |
| tPhysicalContainerGlobalTable OBJECT-TYPE The chassis class contains information about chassis. | 1.3.6.1.4.1.674.10890.1.1.9 | not-accessible | mandatory | |
| ePhysicalContainerGlobalTable OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.9.1 | not-accessible | mandatory | |
| a9ContainerOrChassisType OBJECT-TYPE The type of container or chassis. | 1.3.6.1.4.1.674.10890.1.1.9.1.1 | INTEGER {vOther(1), vUnknown(2), vDesktop(3), vLowProfileDesktop(4), vPizzaBox(5), vMiniTower(6), vTower(7), vPortable(8), vLaptop(9), vNotebook(10), vHandheld(11), vDockingStation(12), vAllInOne(13), vSubNotebook(14), vSpace-saving(15), vLunchBox(16), vMainSystemChassis(17), vExpansionChassis(18), vSubchassis(19), vBusExpansionChassis(20), vPeripheralChassis(21), vRaidChassis(22), vRackMountChassis(23)} | read-only | mandatory |
| a9ContainerAssetTag OBJECT-TYPE The Container asset tag string. This asset tag string is writeable by the system administrator. | 1.3.6.1.4.1.674.10890.1.1.9.1.2 | DmiDisplaystring | read-write | mandatory |
| a9ChassisLockPresent OBJECT-TYPE If true, a chassis lock is present on the container. | 1.3.6.1.4.1.674.10890.1.1.9.1.3 | INTEGER {vFalse(0), vTrue(1), vUnknown(2)} | read-only | mandatory |
| a9ContainerChassisBootupState OBJECT-TYPE The current state of this system when it booted. | 1.3.6.1.4.1.674.10890.1.1.9.1.4 | INTEGER {vOther(1), vUnknown(2), vOk(3), vNon-critical(4), vCritical(5), vNon-recoverable(6)} | read-only | mandatory |
| a9PowerState OBJECT-TYPE The current state of the power supply for this system. | 1.3.6.1.4.1.674.10890.1.1.9.1.5 | INTEGER {vOther(1), vUnknown(2), vOk(3), vNon-critical(4), vCritical(5), vNon-recoverable(6)} | read-only | mandatory |
| a9ThermalState OBJECT-TYPE The current thermal state of this container. | 1.3.6.1.4.1.674.10890.1.1.9.1.6 | INTEGER {vOther(1), vUnknown(2), vOk(3), vNon-critical(4), vCritical(5), vNon-recoverable(6)} | read-only | mandatory |
| a9FruGroupIndex OBJECT-TYPE If this is a field Replacable Unit or if it is part of another FRU, this provides an index into the FRU table; value=-1 indicates that the group is not a FRU | 1.3.6.1.4.1.674.10890.1.1.9.1.7 | DmiInteger | read-only | mandatory |
| a9OperationalGroupIndex OBJECT-TYPE The index into the Operational State table for this device, if applicable. | 1.3.6.1.4.1.674.10890.1.1.9.1.8 | DmiInteger | read-only | mandatory |
| a9ContainerIndex OBJECT-TYPE A unique index for the Physical Container in the Physical Container Global Table. | 1.3.6.1.4.1.674.10890.1.1.9.1.9 | DmiInteger | read-only | mandatory |
| a9ContainerName OBJECT-TYPE This is any 64-octet long name that the user or system administr tor wishes to give this specific physical container. | 1.3.6.1.4.1.674.10890.1.1.9.1.10 | DmiDisplaystring | read-write | mandatory |
| a9ContainerLocation OBJECT-TYPE This attribute is a string name for the location of the containe . This attribute is read-write and may be set to any appropriate value by the user. The string may be 128 octets long. | 1.3.6.1.4.1.674.10890.1.1.9.1.11 | DmiDisplaystring | read-write | mandatory |
| a9ContainerSecurityStatus OBJECT-TYPE This attribute describes whether the Container is physically secure or not. This includes the state of the door lock, or the boot devices or the keyboard or mouse. | 1.3.6.1.4.1.674.10890.1.1.9.1.12 | INTEGER {vOther(1), vUnknown(2), vNoSecurityBreachDetected(3), vContainerSecurityBreachAttempted(4), vContainerSecurityBreached(5)} | read-only | mandatory |
| tSystemControl OBJECT-TYPE This group defines whether System Control functions are availabl and enabled. | 1.3.6.1.4.1.674.10890.1.1.10 | not-accessible | mandatory | |
| eSystemControl OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.10.1 | not-accessible | mandatory | |
| a10AutomaticCapabilities OBJECT-TYPE Indicates which Automatic Capabilities are available for the current operating system. Encoding is as follows: 0x1 = Supports Reboot 0x2 = Supports Power Cycle 0x4 = Supports Notification If value is nonzero, Watchdog is supported. | 1.3.6.1.4.1.674.10890.1.1.10.1.1 | DmiInteger | read-only | mandatory |
| a10AutomaticSettings OBJECT-TYPE Indicates which Automatic Settings are enabled by the user. Encoding is as follows: 0x1 = Enabled w/ Reboot 0x2 = Enabled w/ Power Cycle 0x4 = Enabled w/ Notification If value is nonzero, Watchdog is Enabled. | 1.3.6.1.4.1.674.10890.1.1.10.1.2 | DmiDisplaystring | read-write | mandatory |
| a10NotificationNumber OBJECT-TYPE The number to dial when the watchdog timer elapses. | 1.3.6.1.4.1.674.10890.1.1.10.1.3 | DmiDisplaystring | read-write | mandatory |
| a10ManualCapabilities OBJECT-TYPE Describes which system reset actions may occur.Bit encodings: 0x1 = Reboot 0x2 = Power Off 0x4 = Power Cycle 0x8 = Shutdown OS | 1.3.6.1.4.1.674.10890.1.1.10.1.4 | DmiInteger | read-only | mandatory |
| a10ManualControl OBJECT-TYPE Setting this value will immediately perform one of the following functions. Encoding as follows: Bit encoding: 0x1 = Reboot 0x2 = Power Off 0x4 = Power Cycle 0x8 = Shutdown OS | 1.3.6.1.4.1.674.10890.1.1.10.1.5 | DmiDisplaystring | read-write | mandatory |
| tEsmEventLog OBJECT-TYPE ESM Event Log. | 1.3.6.1.4.1.674.10890.1.1.11 | not-accessible | mandatory | |
| eEsmEventLog OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.11.1 | not-accessible | mandatory | |
| a11Esmlogindex OBJECT-TYPE KEY: The index to this log. | 1.3.6.1.4.1.674.10890.1.1.11.1.1 | DmiInteger | read-only | mandatory |
| a11Esmlogdata OBJECT-TYPE The event log data for the ESM. | 1.3.6.1.4.1.674.10890.1.1.11.1.2 | DmiDisplaystring | read-write | mandatory |
| tPostEventLog OBJECT-TYPE POST Codes Event Log. | 1.3.6.1.4.1.674.10890.1.1.12 | not-accessible | mandatory | |
| ePostEventLog OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.12.1 | not-accessible | mandatory | |
| a12Postlogindex OBJECT-TYPE KEY: The index into the post log. | 1.3.6.1.4.1.674.10890.1.1.12.1.1 | DmiInteger | read-only | mandatory |
| a12Postlogdata OBJECT-TYPE The event log data. | 1.3.6.1.4.1.674.10890.1.1.12.1.2 | DmiOctetstring | read-only | mandatory |
| tUserSecurityGroup OBJECT-TYPE Security Group - contains user database: Used by both DSA and Baseboard components. | 1.3.6.1.4.1.674.10890.1.1.13 | not-accessible | mandatory | |
| eUserSecurityGroup OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.13.1 | not-accessible | mandatory | |
| a13UserIndex OBJECT-TYPE Keyed ID for this group. | 1.3.6.1.4.1.674.10890.1.1.13.1.1 | DmiInteger | read-only | mandatory |
| a13UserName OBJECT-TYPE User name. First user name is 'create', allows creation. | 1.3.6.1.4.1.674.10890.1.1.13.1.2 | DmiDisplaystring | read-only | mandatory |
| a13UserControl OBJECT-TYPE User control. Used for creating/deleting/editing users. | 1.3.6.1.4.1.674.10890.1.1.13.1.3 | DmiDisplaystring | read-write | mandatory |
| tDialupControl OBJECT-TYPE Dialup Control - contains information used by the ESM dialup interface. | 1.3.6.1.4.1.674.10890.1.1.14 | not-accessible | mandatory | |
| eDialupControl OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.14.1 | not-accessible | mandatory | |
| a14DialupCapability OBJECT-TYPE Specifies if this system supports dialup. | 1.3.6.1.4.1.674.10890.1.1.14.1.1 | INTEGER {vFalse(0), vTrue(1)} | read-only | mandatory |
| a14CallbackNumber OBJECT-TYPE The number to callback when a dialup connection is established. | 1.3.6.1.4.1.674.10890.1.1.14.1.2 | DmiDisplaystring | read-write | mandatory |
| tFirmwareInformation OBJECT-TYPE Firmware Information - Contains version/status of firmware. | 1.3.6.1.4.1.674.10890.1.1.15 | not-accessible | mandatory | |
| eFirmwareInformation OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.15.1 | not-accessible | mandatory | |
| a15FirmwareChassisIndex OBJECT-TYPE Firmware chassis index | 1.3.6.1.4.1.674.10890.1.1.15.1.1 | DmiInteger | read-only | mandatory |
| a15FirmwareIndex OBJECT-TYPE Index into the firmware information table | 1.3.6.1.4.1.674.10890.1.1.15.1.2 | DmiInteger | read-only | mandatory |
| a15FirmwareType OBJECT-TYPE The type of this firmware. | 1.3.6.1.4.1.674.10890.1.1.15.1.3 | INTEGER {vOther(1), vUnknown(2), vBios(3), vEsm(4), vPspb(5), vBackplane(6)} | read-write | mandatory |
| a15FirmwareVersion OBJECT-TYPE Version level of this firmware | 1.3.6.1.4.1.674.10890.1.1.15.1.4 | DmiDisplaystring | read-only | mandatory |
| a15FirmwareStatus OBJECT-TYPE Current status of this firmware, if applicable | 1.3.6.1.4.1.674.10890.1.1.15.1.5 | INTEGER {vOther(1), vUnknown(2), vOk(3), vNon-critical(4), vCritical(5), vNon-recoverable(6)} | read-only | mandatory |
| tMiftomib OBJECT-TYPE This group maps the DMI attributes to SNMP. | 1.3.6.1.4.1.674.10890.1.1.99 | not-accessible | mandatory | |
| eMiftomib OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.99.1 | not-accessible | mandatory | |
| a99DellBaseboardMib OBJECT-TYPE The MIB name that defines this MIF | 1.3.6.1.4.1.674.10890.1.1.99.1.1 | DmiDisplaystring | read-only | mandatory |
| a99MibOid OBJECT-TYPE The MIB OID that corresponds to this MIF | 1.3.6.1.4.1.674.10890.1.1.99.1.2 | DmiDisplaystring | read-only | mandatory |
| a99DisableTraps OBJECT-TYPE Setting this value to 1 disables trap generation. | 1.3.6.1.4.1.674.10890.1.1.99.1.3 | DmiInteger | read-only | mandatory |
| tTemperatureProbeAlerts OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.102 | not-accessible | mandatory | |
| eTemperatureProbeAlerts OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.102.1 | not-accessible | mandatory | |
| a102EventType OBJECT-TYPE The type of event that has occurred. | 1.3.6.1.4.1.674.10890.1.1.102.1.1 | INTEGER {vCoolingDeviceStatusChange(1)} | read-only | mandatory |
| a102EventSeverity OBJECT-TYPE The severity of this event. | 1.3.6.1.4.1.674.10890.1.1.102.1.2 | INTEGER {vMonitor(1), vInformation(2), vOk(4), vNon-critical(8), vCritical(10), vNon-recoverable(12)} | read-only | mandatory |
| a102IsEventStateBased OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.102.1.3 | INTEGER {vFalse(0), vTrue(1)} | read-only | mandatory |
| a102EventStateKey OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.102.1.4 | DmiInteger | read-only | mandatory |
| a102AssociatedGroup OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.102.1.5 | DmiDisplaystring | read-only | mandatory |
| a102EventSystem OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.102.1.6 | DmiInteger | read-only | mandatory |
| a102EventSubsystem OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.102.1.7 | DmiInteger | read-only | mandatory |
| a102EventSolution OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.102.1.8 | INTEGER {vOther(1), vUnknown(2)} | read-only | mandatory |
| a102InstanceDataPresent OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.102.1.9 | INTEGER {vFalse(0), vTrue(1)} | read-only | mandatory |
| a102VendorSpecificMessage OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.102.1.10 | DmiDisplaystring | read-only | mandatory |
| a102VendorSpecificData OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.102.1.11 | DmiOctetstring | read-only | mandatory |
| a102VendorTrapNumber OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.102.1.12 | DmiInteger | read-only | mandatory |
| tFanSensorAlerts OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.103 | not-accessible | mandatory | |
| eFanSensorAlerts OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.103.1 | not-accessible | mandatory | |
| a103EventType OBJECT-TYPE The type of event that has occurred. | 1.3.6.1.4.1.674.10890.1.1.103.1.1 | INTEGER {vCoolingDeviceStatusChange(1)} | read-only | mandatory |
| a103EventSeverity OBJECT-TYPE The severity of this event. | 1.3.6.1.4.1.674.10890.1.1.103.1.2 | INTEGER {vMonitor(1), vInformation(2), vOk(4), vNon-critical(8), vCritical(10), vNon-recoverable(12)} | read-only | mandatory |
| a103IsEventStateBased OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.103.1.3 | INTEGER {vFalse(0), vTrue(1)} | read-only | mandatory |
| a103EventStateKey OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.103.1.4 | DmiInteger | read-only | mandatory |
| a103AssociatedGroup OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.103.1.5 | DmiDisplaystring | read-only | mandatory |
| a103EventSystem OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.103.1.6 | DmiInteger | read-only | mandatory |
| a103EventSubsystem OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.103.1.7 | DmiInteger | read-only | mandatory |
| a103EventSolution OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.103.1.8 | INTEGER {vOther(1), vUnknown(2)} | read-only | mandatory |
| a103InstanceDataPresent OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.103.1.9 | INTEGER {vFalse(0), vTrue(1)} | read-only | mandatory |
| a103VendorSpecificMessage OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.103.1.10 | DmiDisplaystring | read-only | mandatory |
| a103VendorSpecificData OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.103.1.11 | DmiOctetstring | read-only | mandatory |
| a103VendorTrapNumber OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.103.1.12 | DmiInteger | read-only | mandatory |
| tVoltageProbeAlerts OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.104 | not-accessible | mandatory | |
| eVoltageProbeAlerts OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.104.1 | not-accessible | mandatory | |
| a104EventType OBJECT-TYPE The type of event that has occurred. | 1.3.6.1.4.1.674.10890.1.1.104.1.1 | INTEGER {vPowerSupplyStatusChange(1)} | read-only | mandatory |
| a104EventSeverity OBJECT-TYPE The severity of this event. | 1.3.6.1.4.1.674.10890.1.1.104.1.2 | INTEGER {vMonitor(1), vInformation(2), vOk(4), vNon-critical(8), vCritical(10), vNon-recoverable(12)} | read-only | mandatory |
| a104IsEventStateBased OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.104.1.3 | INTEGER {vFalse(0), vTrue(1)} | read-only | mandatory |
| a104EventStateKey OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.104.1.4 | DmiInteger | read-only | mandatory |
| a104AssociatedGroup OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.104.1.5 | DmiDisplaystring | read-only | mandatory |
| a104EventSystem OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.104.1.6 | DmiInteger | read-only | mandatory |
| a104EventSubsystem OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.104.1.7 | DmiInteger | read-only | mandatory |
| a104EventSolution OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.104.1.8 | INTEGER {vOther(1), vUnknown(2)} | read-only | mandatory |
| a104InstanceDataPresent OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.104.1.9 | INTEGER {vFalse(0), vTrue(1)} | read-only | mandatory |
| a104VendorSpecificMessage OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.104.1.10 | DmiDisplaystring | read-only | mandatory |
| a104VendorSpecificData OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.104.1.11 | DmiOctetstring | read-only | mandatory |
| a104VendorTrapNumber OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.104.1.12 | DmiInteger | read-only | mandatory |
| tCurrentProbeAlerts OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.105 | not-accessible | mandatory | |
| eCurrentProbeAlerts OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.105.1 | not-accessible | mandatory | |
| a105EventType OBJECT-TYPE The type of event that has occurred. | 1.3.6.1.4.1.674.10890.1.1.105.1.1 | INTEGER {vPowerSupplyStatusChange(1)} | read-only | mandatory |
| a105EventSeverity OBJECT-TYPE The severity of this event. | 1.3.6.1.4.1.674.10890.1.1.105.1.2 | INTEGER {vMonitor(1), vInformation(2), vOk(4), vNon-critical(8), vCritical(10), vNon-recoverable(12)} | read-only | mandatory |
| a105IsEventStateBased OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.105.1.3 | INTEGER {vFalse(0), vTrue(1)} | read-only | mandatory |
| a105EventStateKey OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.105.1.4 | DmiInteger | read-only | mandatory |
| a105AssociatedGroup OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.105.1.5 | DmiDisplaystring | read-only | mandatory |
| a105EventSystem OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.105.1.6 | DmiInteger | read-only | mandatory |
| a105EventSubsystem OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.105.1.7 | DmiInteger | read-only | mandatory |
| a105EventSolution OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.105.1.8 | INTEGER {vOther(1), vUnknown(2)} | read-only | mandatory |
| a105InstanceDataPresent OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.105.1.9 | INTEGER {vFalse(0), vTrue(1)} | read-only | mandatory |
| a105VendorSpecificMessage OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.105.1.10 | DmiDisplaystring | read-only | mandatory |
| a105VendorSpecificData OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.105.1.11 | DmiOctetstring | read-only | mandatory |
| a105VendorTrapNumber OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.105.1.12 | DmiInteger | read-only | mandatory |
| tPowerUnitAlerts OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.107 | not-accessible | mandatory | |
| ePowerUnitAlerts OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.107.1 | not-accessible | mandatory | |
| a107EventType OBJECT-TYPE The type of event that has occurred. | 1.3.6.1.4.1.674.10890.1.1.107.1.1 | INTEGER {vPowerSupplyRedundancyChange(1), vPowerSupplyStatusChange(2)} | read-only | mandatory |
| a107EventSeverity OBJECT-TYPE The severity of this event. | 1.3.6.1.4.1.674.10890.1.1.107.1.2 | INTEGER {vMonitor(1), vInformation(2), vOk(4), vNon-critical(8), vCritical(10), vNon-recoverable(12)} | read-only | mandatory |
| a107IsEventStateBased OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.107.1.3 | INTEGER {vFalse(0), vTrue(1)} | read-only | mandatory |
| a107EventStateKey OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.107.1.4 | DmiInteger | read-only | mandatory |
| a107AssociatedGroup OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.107.1.5 | DmiDisplaystring | read-only | mandatory |
| a107EventSystem OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.107.1.6 | DmiInteger | read-only | mandatory |
| a107EventSubsystem OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.107.1.7 | DmiInteger | read-only | mandatory |
| a107EventSolution OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.107.1.8 | INTEGER {vOther(1), vUnknown(2)} | read-only | mandatory |
| a107InstanceDataPresent OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.107.1.9 | INTEGER {vFalse(0), vTrue(1)} | read-only | mandatory |
| a107VendorSpecificMessage OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.107.1.10 | DmiDisplaystring | read-only | mandatory |
| a107VendorSpecificData OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.107.1.11 | DmiOctetstring | read-only | mandatory |
| a107VendorTrapNumber OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.107.1.12 | DmiInteger | read-only | mandatory |
| tChassisEventGeneration OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.108 | not-accessible | mandatory | |
| eChassisEventGeneration OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.108.1 | not-accessible | mandatory | |
| a108EventType OBJECT-TYPE The type of event that has occurred. | 1.3.6.1.4.1.674.10890.1.1.108.1.1 | INTEGER {vMemoryEccError(1)} | read-only | mandatory |
| a108EventSeverity OBJECT-TYPE The severity of this event. | 1.3.6.1.4.1.674.10890.1.1.108.1.2 | INTEGER {vMonitor(1), vInformation(2), vOk(4), vNon-critical(8), vCritical(10), vNon-recoverable(12)} | read-only | mandatory |
| a108IsEventStateBased OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.108.1.3 | INTEGER {vFalse(0), vTrue(1)} | read-only | mandatory |
| a108EventStateKey OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.108.1.4 | DmiInteger | read-only | mandatory |
| a108AssociatedGroup OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.108.1.5 | DmiDisplaystring | read-only | mandatory |
| a108EventSystem OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.108.1.6 | DmiInteger | read-only | mandatory |
| a108EventSubsystem OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.108.1.7 | DmiInteger | read-only | mandatory |
| a108EventSolution OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.108.1.8 | INTEGER {vOther(1), vUnknown(2)} | read-only | mandatory |
| a108InstanceDataPresent OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.108.1.9 | INTEGER {vFalse(0), vTrue(1)} | read-only | mandatory |
| a108VendorSpecificMessage OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.108.1.10 | DmiDisplaystring | read-only | mandatory |
| a108VendorSpecificData OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.108.1.11 | DmiOctetstring | read-only | mandatory |
| a108VendorTrapNumber OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.108.1.12 | DmiInteger | read-only | mandatory |
| tContainerEventGeneration OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.109 | not-accessible | mandatory | |
| eContainerEventGeneration OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.109.1 | not-accessible | mandatory | |
| a109EventType OBJECT-TYPE The type of event that has occurred. | 1.3.6.1.4.1.674.10890.1.1.109.1.1 | INTEGER {vSecuritySettingsChange(1), vPowerSupplyStatusChange(2), vCoolingDeviceStatusChange(3), vPhysicalDeviceStatusChange(4), vLogicalDeviceStatusChange(5), vContainerSecurityBreach(6), vConfigurationError(7)} | read-only | mandatory |
| a109EventSeverity OBJECT-TYPE The severity of this event. | 1.3.6.1.4.1.674.10890.1.1.109.1.2 | INTEGER {vMonitor(1), vInformation(2), vOk(4), vNon-critical(8), vCritical(10), vNon-recoverable(12)} | read-only | mandatory |
| a109IsEventStateBased OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.109.1.3 | INTEGER {vFalse(0), vTrue(1)} | read-only | mandatory |
| a109EventStateKey OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.109.1.4 | DmiInteger | read-only | mandatory |
| a109AssociatedGroup OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.109.1.5 | DmiDisplaystring | read-only | mandatory |
| a109EventSystem OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.109.1.6 | DmiInteger | read-only | mandatory |
| a109EventSubsystem OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.109.1.7 | DmiInteger | read-only | mandatory |
| a109EventSolution OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.109.1.8 | INTEGER {vOther(1), vUnknown(2)} | read-only | mandatory |
| a109InstanceDataPresent OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.109.1.9 | INTEGER {vFalse(0), vTrue(1)} | read-only | mandatory |
| a109VendorSpecificMessage OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.109.1.10 | DmiDisplaystring | read-only | mandatory |
| a109VendorSpecificData OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.109.1.11 | DmiOctetstring | read-only | mandatory |
| a109VendorTrapNumber OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.109.1.12 | DmiInteger | read-only | mandatory |
| tResetEventGeneration OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.110 | not-accessible | mandatory | |
| eResetEventGeneration OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.110.1 | not-accessible | mandatory | |
| a110EventType OBJECT-TYPE The type of event that has occurred. | 1.3.6.1.4.1.674.10890.1.1.110.1.1 | INTEGER {vSystemUp(1)} | read-only | mandatory |
| a110EventSeverity OBJECT-TYPE The severity of this event. | 1.3.6.1.4.1.674.10890.1.1.110.1.2 | INTEGER {vMonitor(1), vInformation(2), vOk(4), vNon-critical(8), vCritical(10), vNon-recoverable(12)} | read-only | mandatory |
| a110IsEventStateBased OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.110.1.3 | INTEGER {vFalse(0), vTrue(1)} | read-only | mandatory |
| a110EventStateKey OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.110.1.4 | DmiInteger | read-only | mandatory |
| a110AssociatedGroup OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.110.1.5 | DmiDisplaystring | read-only | mandatory |
| a110EventSystem OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.110.1.6 | DmiInteger | read-only | mandatory |
| a110EventSubsystem OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.110.1.7 | DmiInteger | read-only | mandatory |
| a110EventSolution OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.110.1.8 | INTEGER {vOther(1), vUnknown(2)} | read-only | mandatory |
| a110InstanceDataPresent OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.110.1.9 | INTEGER {vFalse(0), vTrue(1)} | read-only | mandatory |
| a110VendorSpecificMessage OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.110.1.10 | DmiDisplaystring | read-only | mandatory |
| a110VendorSpecificData OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.110.1.11 | DmiOctetstring | read-only | mandatory |
| a110VendorTrapNumber OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.110.1.12 | DmiInteger | read-only | mandatory |
| tTrapGroup OBJECT-TYPE This group defines attributes needed for Trap definition. This group does not exist in MIF file | 1.3.6.1.4.1.674.10890.1.1.9999 | not-accessible | mandatory | |
| eTrapGroup OBJECT-TYPE | 1.3.6.1.4.1.674.10890.1.1.9999.1 | not-accessible | mandatory | |
| a9999AlertSystem OBJECT-TYPE Name of the system generating the alert | 1.3.6.1.4.1.674.10890.1.1.9999.1.1 | OCTET STRING | read-only | mandatory |
| a9999AlertGroup OBJECT-TYPE DMI group generating the alert | 1.3.6.1.4.1.674.10890.1.1.9999.1.2 | OCTET STRING | read-only | mandatory |
| a9999AlertMessage OBJECT-TYPE Alert message | 1.3.6.1.4.1.674.10890.1.1.9999.1.3 | OCTET STRING | read-only | mandatory |
| a9999AlertSeverity OBJECT-TYPE DMI alert severity | 1.3.6.1.4.1.674.10890.1.1.9999.1.4 | DmiInteger | read-only | mandatory |
| a9999AlertData OBJECT-TYPE Alert data | 1.3.6.1.4.1.674.10890.1.1.9999.1.5 | OCTET STRING | read-only | mandatory |
Notifications
| Name | OID | Status |
|---|---|---|
| dmtfAlert260 NOTIFICATION-TYPE Temperature sensor violation detected | 1.3.6.1.4.1.674.10890.1.0.260 | |
| dmtfAlert261 NOTIFICATION-TYPE Temperature sensor reading returned to normal | 1.3.6.1.4.1.674.10890.1.0.261 | |
| dmtfAlert268 NOTIFICATION-TYPE Fan sensor detected a failure | 1.3.6.1.4.1.674.10890.1.0.268 | |
| dmtfAlert269 NOTIFICATION-TYPE Fan sensor reading returned to normal | 1.3.6.1.4.1.674.10890.1.0.269 | |
| dmtfAlert272 NOTIFICATION-TYPE Voltage sensor detected a failure | 1.3.6.1.4.1.674.10890.1.0.272 | |
| dmtfAlert273 NOTIFICATION-TYPE Voltage sensor reading returned to normal | 1.3.6.1.4.1.674.10890.1.0.273 | |
| dmtfAlert300 NOTIFICATION-TYPE Temperature sensor warning detected | 1.3.6.1.4.1.674.10890.1.0.300 | |
| dmtfAlert301 NOTIFICATION-TYPE Temperature sensor warning returned to normal | 1.3.6.1.4.1.674.10890.1.0.301 | |
| dmtfAlert302 NOTIFICATION-TYPE Voltage sensor warning detected | 1.3.6.1.4.1.674.10890.1.0.302 | |
| dmtfAlert303 NOTIFICATION-TYPE Voltage sensor warning returned to normal | 1.3.6.1.4.1.674.10890.1.0.303 | |
| dmtfAlert304 NOTIFICATION-TYPE Fan sensor warning detected | 1.3.6.1.4.1.674.10890.1.0.304 | |
| dmtfAlert305 NOTIFICATION-TYPE Fan sensor warning returned to normal | 1.3.6.1.4.1.674.10890.1.0.305 | |
| dmtfAlert306 NOTIFICATION-TYPE Current sensor detected a failure | 1.3.6.1.4.1.674.10890.1.0.306 | |
| dmtfAlert307 NOTIFICATION-TYPE Current sensor reading returned to normal | 1.3.6.1.4.1.674.10890.1.0.307 | |
| dmtfAlert308 NOTIFICATION-TYPE Current sensor warning detected | 1.3.6.1.4.1.674.10890.1.0.308 | |
| dmtfAlert309 NOTIFICATION-TYPE Current sensor warning returned to normal | 1.3.6.1.4.1.674.10890.1.0.309 | |
| dmtfAlert310 NOTIFICATION-TYPE Power supply lost redundancy detected | 1.3.6.1.4.1.674.10890.1.0.310 | |
| dmtfAlert311 NOTIFICATION-TYPE Power supply regained redundancy | 1.3.6.1.4.1.674.10890.1.0.311 | |
| dmtfAlert312 NOTIFICATION-TYPE Power supply degraded redundancy detected | 1.3.6.1.4.1.674.10890.1.0.312 | |
| dmtfAlert313 NOTIFICATION-TYPE Power supply degraded redundancy returned to normal | 1.3.6.1.4.1.674.10890.1.0.313 | |
| dmtfAlert314 NOTIFICATION-TYPE Power supply failure detected | 1.3.6.1.4.1.674.10890.1.0.314 | |
| dmtfAlert315 NOTIFICATION-TYPE Power supply failure returned to normal | 1.3.6.1.4.1.674.10890.1.0.315 | |
| dmtfAlert320 NOTIFICATION-TYPE Chassis intrusion detected | 1.3.6.1.4.1.674.10890.1.0.320 | |
| dmtfAlert321 NOTIFICATION-TYPE Chassis intrusion returned to normal | 1.3.6.1.4.1.674.10890.1.0.321 | |
| dmtfAlert323 NOTIFICATION-TYPE Memory ECC fault detected | 1.3.6.1.4.1.674.10890.1.0.323 | |
| dmtfAlert325 NOTIFICATION-TYPE Lost connection to storage system | 1.3.6.1.4.1.674.10890.1.0.325 | |
| dmtfAlert326 NOTIFICATION-TYPE Established connection to storage system | 1.3.6.1.4.1.674.10890.1.0.326 | |
| dmtfAlert327 NOTIFICATION-TYPE Reestablished connection to storage system | 1.3.6.1.4.1.674.10890.1.0.327 | |
| dmtfAlert330 NOTIFICATION-TYPE System Up | 1.3.6.1.4.1.674.10890.1.0.330 |