DELL-NETWORKING-BPSTATS-MIB
- Registered at
- 1.3.6.1.4.1.6027.3.24
- Last updated
- 2013-09-18 12:48
- Organization
- Dell Inc
- Revisions
- 2013-05-22 12:48
- Namespace
- dell
- Source file
DELL-NETWORKING-BPSTATS-MIB- Digest
sha256:2246bdcaadaade9e3338454fef434c94f45df8f0bd4782b5f6db25431679216a
Description
Dell Networking OS Back plane statistics mib. This is MIB shall use for all back plane statistics related activities. This includes the BP ports traffic statistics. BP link bundle monitoring based on BP port statistics. Queue statistics and buffer utilization on BP ports etc ..
Contact
http://www.dell.com/support
Imports
| From | Symbols |
|---|---|
| DELL-NETWORKING-SMI | dellNetMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Counter64, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TimeStamp |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
DELL-NETWORKING-BPSTATS-MIB DELL-NETWORKING-SMI SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| dellNetBpStatsLinkBundleObjects OBJECT-IDENTITY | 1.3.6.1.4.1.6027.3.24.1 | |||
| bpLinkBundleObjects OBJECT-IDENTITY | 1.3.6.1.4.1.6027.3.24.1.1 | |||
| bpLinkBundleRateInterval OBJECT-TYPE The rate interval for polling the Bp link bundle Monitoring. | 1.3.6.1.4.1.6027.3.24.1.1.1 | INTEGER (10..299) | read-write | current |
| bpLinkBundleTriggerThreshold OBJECT-TYPE The traffic distribution trigger threshold for Bp link bundle Monitoring.In percentage of total bandwidth of the link Bundle | 1.3.6.1.4.1.6027.3.24.1.1.2 | INTEGER (1..90) | read-write | current |
| dellNetBpStatsObjects OBJECT-IDENTITY | 1.3.6.1.4.1.6027.3.24.2 | |||
| bpStatsObjects OBJECT-IDENTITY | 1.3.6.1.4.1.6027.3.24.2.1 | |||
| bpDropsTable OBJECT-TYPE The back plane drops table contains the list of various drops per BP higig port per BCM unit in a stack unit(card type). | 1.3.6.1.4.1.6027.3.24.2.1.1 | not-accessible | current | |
| bpDropsEntry OBJECT-TYPE Each drops entry is being indexed by StackUnit(card Type) BCM unit ID and local Port Id | 1.3.6.1.4.1.6027.3.24.2.1.1.1 | not-accessible | current | |
| bpDropsStackUnitIndex OBJECT-TYPE Stack unit(Card Type Id) number where this port present Each card shall contain more than one BCM units | 1.3.6.1.4.1.6027.3.24.2.1.1.1.1 | INTEGER (1..12) | not-accessible | current |
| bpDropsPortPipe OBJECT-TYPE bpPortPipe denotes the BCM unit in the stack unit(card Type) Each BCM unit shall contain 1-128 local ports, which includes BP as well as front end ports | 1.3.6.1.4.1.6027.3.24.2.1.1.1.2 | INTEGER (1..6) | not-accessible | current |
| bpDropsPortIndex OBJECT-TYPE BP port number. Maximum ports shall support by Trident2 BCM npu is 128. This address space includes FE ports also, which are invalid ports as far as BP is concern. For Z9000 leaf BCM units, 34 to 41 are the valid BP port numbers and for spine BCM units, 1 to 16 are the valid BP ports | 1.3.6.1.4.1.6027.3.24.2.1.1.1.3 | INTEGER (1..128) | not-accessible | current |
| bpDropsInDrops OBJECT-TYPE The No of Ingress packet Drops | 1.3.6.1.4.1.6027.3.24.2.1.1.1.4 | Counter64 | read-only | current |
| bpDropsInUnKnownHgHdr OBJECT-TYPE The No of Unknown hiGig header Ingress packet Drops | 1.3.6.1.4.1.6027.3.24.2.1.1.1.5 | Counter64 | read-only | current |
| bpDropsInUnKnownHgOpcode OBJECT-TYPE The No of Unknown hiGig Opcode Ingress packet Drops | 1.3.6.1.4.1.6027.3.24.2.1.1.1.6 | Counter64 | read-only | current |
| bpDropsInMTUExceeds OBJECT-TYPE No of packets dropped on Ingress because of MTUExceeds | 1.3.6.1.4.1.6027.3.24.2.1.1.1.7 | Counter64 | read-only | current |
| bpDropsInMacDrops OBJECT-TYPE No of packets dropped on Ingress MAC | 1.3.6.1.4.1.6027.3.24.2.1.1.1.8 | Counter64 | read-only | current |
| bpDropsMMUHOLDrops OBJECT-TYPE No of packets dropped in MMU because of MMU HOL Drops | 1.3.6.1.4.1.6027.3.24.2.1.1.1.9 | Counter64 | read-only | current |
| bpDropsEgMacDrops OBJECT-TYPE No of packets dropped on Egress MAC | 1.3.6.1.4.1.6027.3.24.2.1.1.1.10 | Counter64 | read-only | current |
| bpDropsEgTxAgedCounter OBJECT-TYPE No of Aged packets dropped on Egress | 1.3.6.1.4.1.6027.3.24.2.1.1.1.11 | Counter64 | read-only | current |
| bpDropsEgTxErrCounter OBJECT-TYPE No of Error packets dropped on Egress | 1.3.6.1.4.1.6027.3.24.2.1.1.1.12 | Counter64 | read-only | current |
| bpDropsEgTxMACUnderflow OBJECT-TYPE No of MAC underflow packets dropped on Egress | 1.3.6.1.4.1.6027.3.24.2.1.1.1.13 | Counter64 | read-only | current |
| bpDropsEgTxErrPktCounter OBJECT-TYPE No of total packets dropped in Egress | 1.3.6.1.4.1.6027.3.24.2.1.1.1.14 | Counter64 | read-only | current |
| bpIfStatsTable OBJECT-TYPE The back plane counter statistics table contains the list of various counters per BP higig port per BCM unit in a stack unit(card type). | 1.3.6.1.4.1.6027.3.24.2.1.2 | not-accessible | current | |
| bpIfStatsEntry OBJECT-TYPE Each Stats entry is being indexed by StackUnit(card Type) BCM unit ID and local Port Id | 1.3.6.1.4.1.6027.3.24.2.1.2.1 | not-accessible | current | |
| bpIfStatsStackUnitIndex OBJECT-TYPE Stack unit(Card Type Id) number where this port present Each card shall contain more than one BCM units | 1.3.6.1.4.1.6027.3.24.2.1.2.1.1 | INTEGER (1..12) | not-accessible | current |
| bpIfStatsPortPipe OBJECT-TYPE bpPortPipe denotes the BCM unit in the stack unit(card Type) Each BCM unit shall contain 1-128 local ports, which includes BP as well as front end ports | 1.3.6.1.4.1.6027.3.24.2.1.2.1.2 | INTEGER (1..6) | not-accessible | current |
| bpIfStatsPortIndex OBJECT-TYPE BP port number. Maximum ports shall support by Trident2 BCM npu is 128. This address space includes FE ports also, which are invalid ports as far as BP is concern. For Z9000 leaf BCM units, 34 to 41 are the valid BP port numbers and for spine BCM units, 1 to 16 are the valid BP ports | 1.3.6.1.4.1.6027.3.24.2.1.2.1.3 | INTEGER (1..128) | not-accessible | current |
| bpIfStatsIn64BytePkts OBJECT-TYPE The total number of frames (including bad frames) received that were 64 octets in length (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.6027.3.24.2.1.2.1.4 | Counter64 | read-only | current |
| bpIfStatsIn65To127BytePkts OBJECT-TYPE The total number of frames (including bad frames) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.6027.3.24.2.1.2.1.5 | Counter64 | read-only | current |
| bpIfStatsIn128To255BytePkts OBJECT-TYPE The total number of frames (including bad frames) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.6027.3.24.2.1.2.1.6 | Counter64 | read-only | current |
| bpIfStatsIn256To511BytePkts OBJECT-TYPE The total number of frames (including bad frames) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.6027.3.24.2.1.2.1.7 | Counter64 | read-only | current |
| bpIfStatsIn512To1023BytePkts OBJECT-TYPE The total number of frames (including bad frames) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.6027.3.24.2.1.2.1.8 | Counter64 | read-only | current |
| bpIfStatsInOver1023BytePkts OBJECT-TYPE The total number of frames received that were longer than 1023 (1025 Bytes in case of VLAN Tag) octets (excluding framing bits, but including FCS octets) and were otherwise well formed. This counter is not incremented for too long frames. | 1.3.6.1.4.1.6027.3.24.2.1.2.1.9 | Counter64 | read-only | current |
| bpIfStatsInThrottles OBJECT-TYPE This counter is incremented when a valid frame with a length or type field value equal to 0x8808 (Control Frame) is received. | 1.3.6.1.4.1.6027.3.24.2.1.2.1.10 | Counter64 | read-only | current |
| bpIfStatsInRunts OBJECT-TYPE The total number of frames received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. | 1.3.6.1.4.1.6027.3.24.2.1.2.1.11 | Counter64 | read-only | current |
| bpIfStatsInGiants OBJECT-TYPE The total number of frames received that were longer than 1518 (1522 Bytes in case of VLAN Tag) octets (excluding framing bits, but including FCS octets) and were otherwise well formed. This counter is not incremented for too long frames. | 1.3.6.1.4.1.6027.3.24.2.1.2.1.12 | Counter64 | read-only | current |
| bpIfStatsInCRC OBJECT-TYPE The total number of frames received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had a bad CRC. | 1.3.6.1.4.1.6027.3.24.2.1.2.1.13 | Counter64 | read-only | current |
| bpIfStatsInOverruns OBJECT-TYPE The total number of frames has been chosen to be dropped by detecting the buffer issue | 1.3.6.1.4.1.6027.3.24.2.1.2.1.14 | Counter64 | read-only | current |
| bpIfStatsOutUnderruns OBJECT-TYPE The total number of frames dropped because of buffer underrun. | 1.3.6.1.4.1.6027.3.24.2.1.2.1.15 | Counter64 | read-only | current |
| bpIfStatsOutUnicasts OBJECT-TYPE The total number of Unicast frames are transmitted out of the interface | 1.3.6.1.4.1.6027.3.24.2.1.2.1.16 | Counter64 | read-only | current |
| bpIfStatsOutCollisions OBJECT-TYPE A count of the frames that due to excessive or late collisions are not transmitted successfully. | 1.3.6.1.4.1.6027.3.24.2.1.2.1.17 | Counter64 | read-only | current |
| bpIfStatsOutWredDrops OBJECT-TYPE The total number of frames are dropped by using WRED policy due to excessive traffic. | 1.3.6.1.4.1.6027.3.24.2.1.2.1.18 | Counter64 | read-only | current |
| bpIfStatsOut64BytePkts OBJECT-TYPE The total number of valid frames with the block of 64 byte size is transmitted | 1.3.6.1.4.1.6027.3.24.2.1.2.1.19 | Counter64 | read-only | current |
| bpIfStatsOut65To127BytePkts OBJECT-TYPE The total of valid frame with the block size of range between 65 and 127 bytes are transmitted. | 1.3.6.1.4.1.6027.3.24.2.1.2.1.20 | Counter64 | read-only | current |
| bpIfStatsOut128To255BytePkts OBJECT-TYPE The total of valid frame with the block size of range between 128 and 255 bytes are transmitted | 1.3.6.1.4.1.6027.3.24.2.1.2.1.21 | Counter64 | read-only | current |
| bpIfStatsOut256To511BytePkts OBJECT-TYPE The total of valid frame with the block size of range between 256 and 511 bytes are transmitted | 1.3.6.1.4.1.6027.3.24.2.1.2.1.22 | Counter64 | read-only | current |
| bpIfStatsOut512To1023BytePkts OBJECT-TYPE The total of valid frame with the block size of range between 512 and 1023 bytes are transmitted | 1.3.6.1.4.1.6027.3.24.2.1.2.1.23 | Counter64 | read-only | current |
| bpIfStatsOutOver1023BytePkts OBJECT-TYPE The total of valid frame with the block size of greater than 1023 bytes are transmitted. | 1.3.6.1.4.1.6027.3.24.2.1.2.1.24 | Counter64 | read-only | current |
| bpIfStatsOutThrottles OBJECT-TYPE This counter is incremented when a valid frame with a length or type field value equal to 0x8808 (Control Frame) is sent. | 1.3.6.1.4.1.6027.3.24.2.1.2.1.25 | Counter64 | read-only | current |
| bpIfStatsLastDiscontinuityTime OBJECT-TYPE The value of sysUpTime on the most recent occasion at which this interface's counters suffered a discontinuity via a reset. If no such discontinuities have occurred since the last reinitialization of the local management subsystem, then this object contains a zero value. | 1.3.6.1.4.1.6027.3.24.2.1.2.1.26 | TimeStamp | read-only | current |
| bpIfStatsInCentRate OBJECT-TYPE This is the percentage of maximum line rate at which data is receiving on the Interface. For Z9000 - BP hiGig line rate is 42G. This is an integer value which can go from 0% to 100%. | 1.3.6.1.4.1.6027.3.24.2.1.2.1.27 | Integer32 (0..100) | read-only | current |
| bpIfStatsOutCentRate OBJECT-TYPE This is the percentage of maximum line rate at which data is sending on the Interface. For Z9000 - BP hiGig line rate is 42G. This is an integer value which can go from 0% to 100%. | 1.3.6.1.4.1.6027.3.24.2.1.2.1.28 | Integer32 (0..100) | read-only | current |
| bpIfStatsLastChange OBJECT-TYPE The value of sysUpTime, on which all the counters are updated recently | 1.3.6.1.4.1.6027.3.24.2.1.2.1.29 | TimeStamp | read-only | current |
| bpPacketBufferTable OBJECT-TYPE The packet buffer table contains the modular packet buffers details per stack unit and the mode of allocation. | 1.3.6.1.4.1.6027.3.24.2.1.3 | not-accessible | current | |
| bpPacketBufferEntry OBJECT-TYPE Packet buffer details per NPU unit. | 1.3.6.1.4.1.6027.3.24.2.1.3.1 | not-accessible | current | |
| bpPacketBufferStackUnitIndex OBJECT-TYPE Stack unit(Card Type Id) number where this port present Each card shall contain more than one BCM units | 1.3.6.1.4.1.6027.3.24.2.1.3.1.1 | INTEGER (1..12) | not-accessible | current |
| bpPacketBufferPortPipe OBJECT-TYPE bpPortPipe denotes the BCM unit in the stack unit(card Type) Each BCM unit shall contain 1-128 local ports, which includes BP as well as front end ports | 1.3.6.1.4.1.6027.3.24.2.1.3.1.2 | INTEGER (1..6) | not-accessible | current |
| bpPacketBufferTotalPacketBuffer OBJECT-TYPE Total packet buffer in this NPU unit. | 1.3.6.1.4.1.6027.3.24.2.1.3.1.3 | Counter32 | read-only | current |
| bpPacketBufferCurrentAvailBuffer OBJECT-TYPE Current available buffer in this NPU unit. | 1.3.6.1.4.1.6027.3.24.2.1.3.1.4 | Counter32 | read-only | current |
| bpPacketBufferPacketBufferAlloc OBJECT-TYPE Static or Dynamic allocation. | 1.3.6.1.4.1.6027.3.24.2.1.3.1.5 | Counter32 | read-only | current |
| bpBufferStatsTable OBJECT-TYPE The back plane stats per port table contains the packet buffer usage per bp port per NPU unit. | 1.3.6.1.4.1.6027.3.24.2.1.4 | not-accessible | current | |
| bpBufferStatsEntry OBJECT-TYPE Per bp port buffer stats | 1.3.6.1.4.1.6027.3.24.2.1.4.1 | not-accessible | current | |
| bpBufferStatsStackUnitIndex OBJECT-TYPE Stack unit(Card Type Id) number where this port present Each card shall contain more than one BCM units | 1.3.6.1.4.1.6027.3.24.2.1.4.1.1 | INTEGER (1..12) | not-accessible | current |
| bpBufferStatsPortPipe OBJECT-TYPE bpPortPipe denotes the BCM unit in the stack unit(card Type) Each BCM unit shall contain 1-128 local ports, which includes BP as well as front end ports | 1.3.6.1.4.1.6027.3.24.2.1.4.1.2 | INTEGER (1..6) | not-accessible | current |
| bpBufferStatsPortIndex OBJECT-TYPE BP port number. Maximum ports shall support by Trident2 BCM npu is 128. This address space includes FE ports also, which are invalid ports as far as BP is concern. For Z9000 leaf BCM units, 34 to 41 are the valid BP port numbers and for spine BCM units, 1 to 16 are the valid BP ports | 1.3.6.1.4.1.6027.3.24.2.1.4.1.3 | INTEGER (1..128) | not-accessible | current |
| bpBufferStatsCurrentUsagePerPort OBJECT-TYPE Current buffer usage per bp port. | 1.3.6.1.4.1.6027.3.24.2.1.4.1.4 | Counter32 | read-only | current |
| bpBufferStatsDefaultPacketBuffAlloc OBJECT-TYPE Default packet buffer allocated. | 1.3.6.1.4.1.6027.3.24.2.1.4.1.5 | Counter32 | read-only | current |
| bpBufferStatsMaxLimitPerPort OBJECT-TYPE Max buffer limit per bp port. | 1.3.6.1.4.1.6027.3.24.2.1.4.1.6 | Counter32 | read-only | current |
| bpCosStatsTable OBJECT-TYPE The back plane statistics per COS table gives packet buffer statistics per COS per bp port. | 1.3.6.1.4.1.6027.3.24.2.1.5 | not-accessible | current | |
| bpCosStatsEntry OBJECT-TYPE Per bp port buffer stats and per COS buffer stats. | 1.3.6.1.4.1.6027.3.24.2.1.5.1 | not-accessible | current | |
| bpCosStatsStackUnitIndex OBJECT-TYPE Stack unit(Card Type Id) number where this port present Each card shall contain more than one BCM units | 1.3.6.1.4.1.6027.3.24.2.1.5.1.1 | INTEGER (1..12) | not-accessible | current |
| bpCosStatsPortPipe OBJECT-TYPE bpPortPipe denotes the BCM unit in the stack unit(card Type) Each BCM unit shall contain 1-128 local ports, which includes BP as well as front end ports | 1.3.6.1.4.1.6027.3.24.2.1.5.1.2 | INTEGER (1..6) | not-accessible | current |
| bpCosStatsPortIndex OBJECT-TYPE BP port number. Maximum ports shall support by Trident2 BCM npu is 128. This address space includes FE ports also, which are invalid ports as far as BP is concern. For Z9000 leaf BCM units, 34 to 41 are the valid BP port numbers and for spine BCM units, 1 to 16 are the valid BP ports | 1.3.6.1.4.1.6027.3.24.2.1.5.1.3 | INTEGER (1..128) | not-accessible | current |
| bpCosStatsCOSNumber OBJECT-TYPE COS queue number, There shall 12 unicast and 9 multicast queues per port in Trident2 | 1.3.6.1.4.1.6027.3.24.2.1.5.1.4 | INTEGER (1..21) | not-accessible | current |
| bpCosStatsCurrentUsage OBJECT-TYPE Current buffer usage per COS per bp port. | 1.3.6.1.4.1.6027.3.24.2.1.5.1.5 | Counter32 | read-only | current |
| bpCosStatsDefaultPacketBuffAlloc OBJECT-TYPE Default packet buffer allocated per COS queue | 1.3.6.1.4.1.6027.3.24.2.1.5.1.6 | Counter32 | read-only | current |
| bpCosStatsMaxLimit OBJECT-TYPE Max buffer utilization limit per bp port. | 1.3.6.1.4.1.6027.3.24.2.1.5.1.7 | Counter32 | read-only | current |
| bpCosStatsHOLDDrops OBJECT-TYPE HOLD Drops Per Queue. | 1.3.6.1.4.1.6027.3.24.2.1.5.1.8 | Counter64 | read-only | current |
| dellNetBpStatsAlarms OBJECT-IDENTITY | 1.3.6.1.4.1.6027.3.24.3 | |||
| bpLinkBundleNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.6027.3.24.3.1 | |||
| bpLinkBundleAlarmVariable OBJECT-IDENTITY | 1.3.6.1.4.1.6027.3.24.3.2 | |||
| bpLinkBundleType OBJECT-TYPE Indicates Type of Back plane HiGig link bundle | 1.3.6.1.4.1.6027.3.24.3.2.1 | INTEGER {unknown(1), bpHgBundle(2)} | accessible-for-notify | current |
| bpLinkBundleSlot OBJECT-TYPE The SlotId on which Link Bundle is overloaded | 1.3.6.1.4.1.6027.3.24.3.2.2 | INTEGER | accessible-for-notify | current |
| bpLinkBundleNpuUnit OBJECT-TYPE The npuUnitId(BCM unit Id) on which Link Bundle is overloaded | 1.3.6.1.4.1.6027.3.24.3.2.3 | INTEGER | accessible-for-notify | current |
| bpLinkBundleLocalId OBJECT-TYPE The local linkBundle Id which is overloaded | 1.3.6.1.4.1.6027.3.24.3.2.4 | INTEGER | accessible-for-notify | current |
Notifications
| Name | OID | Status |
|---|---|---|
| bpLinkBundleImbalance NOTIFICATION-TYPE Trap generated when traffic imbalance observed in BP Link Bundles | 1.3.6.1.4.1.6027.3.24.3.1.1 | current |
| bpLinkBundleImbalanceClear NOTIFICATION-TYPE Trap generated when traffic imbalance is no longer observed on Bp Link bundles | 1.3.6.1.4.1.6027.3.24.3.1.2 | current |