DDN-WOS-MIB
- Registered at
- 1.3.6.1.4.1.6894
- Last updated
- 2012-01-04 00:00
- Organization
- DataDirect Networks, Inc.
- Revisions
- 2012-01-04 00:00
- Namespace
- ddn
- Source file
DDN-WOS-MIB- Digest
sha256:091903de168818f63b89bdcabe78af931d0955926fb923a558ed9fc4c845c876
Description
SMI v2 MIB module for WOS (Web Object Scalar).
Contact
DataDirect Networks, Inc. Phone: 1 800 TERABYTE Email: support@ddn.com
Imports
| From | Symbols |
|---|---|
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter64, Gauge32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, enterprises, iso |
| SNMPv2-TC | DateAndTime, DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
DDN-WOS-MIB INET-ADDRESS-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Under this module's arcs
Where the registration tree carries on below this module.
| Arc | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6894.2 | unit | SFA-INFO |
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| WosSeverityLevel TEXTUAL-CONVENTION Specifies the severity level of an event: emergency: A panic condition - notify all tech staff on call. alert: Should be corrected immediately - notify staff who can fix the problem - e.g. drive down alert. critical: Should be corrected immediately. Indicates failure in a primary system - fix CRITICAL problems before ALERT error: Non-urgent failures - these should be relayed to developers or admins - each item must be resolved within a given time. warning: Warning messages - not an error, but indication that an error will occur if action is not taken - e.g. cluster capacity is 70% used - each item must be resolved within a given time. notice: Events that are unusual but not error conditions - might be summarized in an email to developers or admins to spot potential problems - no immediate action required. informational: Normal operational messages - may be harvested for reporting, measuring throughput, etc - no action required. debug: Info useful to developers for debugging the application - not useful during operations. | current | |||
| WosSyslogFacility TEXTUAL-CONVENTION The syslog standard Facilities (from RFC 3164). user (1) - random user-level messages mail (2) - mail system daemon (3) - system daemons auth (4) - security/authorization messages syslog (5) - messages generated internally by syslogd lpr (6) - line printer subsystem news (7) - network news subsystem uucp (8) - UUCP subsystem cron (9) - clock daemon authpriv (10) - security/authorization messages (private) ftp (11) - ftp daemon local0 (16) - reserved for local use local1 (17) - reserved for local use local2 (18) - reserved for local use local3 (19) - reserved for local use local4 (20) - reserved for local use local5 (21) - reserved for local use local6 (22) - reserved for local use local7 (23) - reserved for local use | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| datadirect OBJECT-IDENTITY | 1.3.6.1.4.1.6894 | |||
| wos OBJECT-IDENTITY | 1.3.6.1.4.1.6894.4 | |||
| wosNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.6894.4.1.0 | |||
| wosObjects OBJECT-IDENTITY | 1.3.6.1.4.1.6894.4.1.1 | |||
| wosNotificationInfo OBJECT-IDENTITY | 1.3.6.1.4.1.6894.4.1.1.1 | |||
| wosTrapDesc OBJECT-TYPE Description of the notification. | 1.3.6.1.4.1.6894.4.1.1.1.1 | DisplayString | accessible-for-notify | current |
| wosTrapSeverity OBJECT-TYPE Severity of the notification. emergency: A panic condition - notify all tech staff on call. alert: Should be corrected immediately - notify staff who can fix the problem - e.g. drive down alert. critical: Should be corrected immediately. Indicates failure in a primary system - fix CRITICAL problems before ALERT error: Non-urgent failures - these should be relayed to developers or admins - each item must be resolved within a given time. warning: Warning messages - not an error, but indication that an error will occur if action is not taken - e.g. cluster capacity is 70% used - each item must be resolved within a given time. notice: Events that are unusual but not error conditions - might be summarized in an email to developers or admins to spot potential problems - no immediate action required. informational: Normal operational messages - may be harvested for reporting, measuring throughput, etc - no action required. debug: Info useful to developers for debugging the application - not useful during operations. | 1.3.6.1.4.1.6894.4.1.1.1.2 | WosSeverityLevel | accessible-for-notify | current |
| wosTrapType OBJECT-TYPE Identifies the type of the notification. | 1.3.6.1.4.1.6894.4.1.1.1.3 | DisplayString | accessible-for-notify | current |
| wosTrapLocation OBJECT-TYPE A location pertaining to the notification (node IP address, cluster name, zone name, etc.) | 1.3.6.1.4.1.6894.4.1.1.1.4 | DisplayString | accessible-for-notify | current |
| wosStatsInfo OBJECT-IDENTITY | 1.3.6.1.4.1.6894.4.1.1.2 | |||
| wosStatsFRPS OBJECT-TYPE Object read rate in file reads per second. | 1.3.6.1.4.1.6894.4.1.1.2.1 | Gauge32 | read-only | current |
| wosStatsFWPS OBJECT-TYPE Object write rate in file writes per second. | 1.3.6.1.4.1.6894.4.1.1.2.2 | Gauge32 | read-only | current |
| wosStatsFDPS OBJECT-TYPE Object delete rate in file deletes per second. | 1.3.6.1.4.1.6894.4.1.1.2.3 | Gauge32 | read-only | current |
| wosStatsReadLatency OBJECT-TYPE Object read latency in milliseconds. | 1.3.6.1.4.1.6894.4.1.1.2.4 | Gauge32 | read-only | current |
| wosStatsWriteLatency OBJECT-TYPE Object write latency in milliseconds. | 1.3.6.1.4.1.6894.4.1.1.2.5 | Gauge32 | read-only | current |
| wosStatsDeleteLatency OBJECT-TYPE Object delete latency in milliseconds. | 1.3.6.1.4.1.6894.4.1.1.2.6 | Gauge32 | read-only | current |
| wosStatsReadThroughput OBJECT-TYPE Object read throughput. | 1.3.6.1.4.1.6894.4.1.1.2.7 | Gauge32 | read-only | current |
| wosStatsWriteThroughput OBJECT-TYPE Object write throughput. | 1.3.6.1.4.1.6894.4.1.1.2.8 | Gauge32 | read-only | current |
| wosStatsReadCount OBJECT-TYPE Total number of read transactions since the last cluster restart. | 1.3.6.1.4.1.6894.4.1.1.2.9 | Counter64 | read-only | current |
| wosStatsWriteCount OBJECT-TYPE Total number of write transactions since the last cluster restart. | 1.3.6.1.4.1.6894.4.1.1.2.10 | Counter64 | read-only | current |
| wosStatsDeleteCount OBJECT-TYPE Total number of delete transactions since the last cluster restart. | 1.3.6.1.4.1.6894.4.1.1.2.11 | Counter64 | read-only | current |
| wosAlertsInfo OBJECT-IDENTITY | 1.3.6.1.4.1.6894.4.1.1.3 | |||
| wosAlertTable OBJECT-TYPE Table containing cluster alerts. | 1.3.6.1.4.1.6894.4.1.1.3.1 | not-accessible | current | |
| wosAlertEntry OBJECT-TYPE An entry in wosAlertTable. | 1.3.6.1.4.1.6894.4.1.1.3.1.1 | not-accessible | current | |
| wosAlertIndex OBJECT-TYPE Alert table index. The most recent alert is assigned starting at index 1, and older alerts are assigned indices in ascending order. | 1.3.6.1.4.1.6894.4.1.1.3.1.1.1 | Unsigned32 | not-accessible | current |
| wosAlertSeverity OBJECT-TYPE Severity of the alert. emergency: A panic condition - notify all tech staff on call. alert: Should be corrected immediately - notify staff who can fix the problem - e.g. drive down alert. critical: Should be corrected immediately. Indicates failure in a primary system - fix CRITICAL problems before ALERT error: Non-urgent failures - these should be relayed to developers or admins - each item must be resolved within a given time. warning: Warning messages - not an error, but indication that an error will occur if action is not taken - e.g. cluster capacity is 70% used - each item must be resolved within a given time. notice: Events that are unusual but not error conditions - might be summarized in an email to developers or admins to spot potential problems - no immediate action required. informational: Normal operational messages - may be harvested for reporting, measuring throughput, etc - no action required. debug: Info useful to developers for debugging the application - not useful during operations. | 1.3.6.1.4.1.6894.4.1.1.3.1.1.2 | WosSeverityLevel | read-only | current |
| wosAlertTime OBJECT-TYPE Date and time the alert was generated. | 1.3.6.1.4.1.6894.4.1.1.3.1.1.3 | DateAndTime | read-only | current |
| wosAlertType OBJECT-TYPE Identifies the type of the alert. | 1.3.6.1.4.1.6894.4.1.1.3.1.1.4 | DisplayString | read-only | current |
| wosAlertLocation OBJECT-TYPE A location pertaining to the alert (node IP address, cluster name, zone name, etc.) | 1.3.6.1.4.1.6894.4.1.1.3.1.1.5 | DisplayString | read-only | current |
| wosAlertDesc OBJECT-TYPE Description of the alert. | 1.3.6.1.4.1.6894.4.1.1.3.1.1.6 | DisplayString | read-only | current |
| wosClusterInfo OBJECT-IDENTITY | 1.3.6.1.4.1.6894.4.1.1.4 | |||
| wosClusterName OBJECT-TYPE The name of the cluster. | 1.3.6.1.4.1.6894.4.1.1.4.1 | DisplayString | read-only | current |
| wosClusterId OBJECT-TYPE The ID number of the cluster. | 1.3.6.1.4.1.6894.4.1.1.4.2 | DisplayString | read-only | current |
| wosClusterStatus OBJECT-TYPE The cluster status. | 1.3.6.1.4.1.6894.4.1.1.4.3 | DisplayString | read-only | current |
| wosClusterPrimaryNodeAddressType OBJECT-TYPE The IP address type of the primary cluster node. | 1.3.6.1.4.1.6894.4.1.1.4.4 | InetAddressType | read-only | current |
| wosClusterPrimaryNodeAddress OBJECT-TYPE The IP address of the cluster primary node. Refer to wosClusterPrimaryNodeAddress to determine the address type. | 1.3.6.1.4.1.6894.4.1.1.4.5 | InetAddress | read-only | current |
| wosClusterTotalNodeCount OBJECT-TYPE The total number of nodes in the cluster. | 1.3.6.1.4.1.6894.4.1.1.4.6 | Unsigned32 | read-only | current |
| wosClusterActiveNodeCount OBJECT-TYPE The number of nodes in the cluster that are active. | 1.3.6.1.4.1.6894.4.1.1.4.7 | Unsigned32 | read-only | current |
| wosClusterDisconnectedNodeCount OBJECT-TYPE Then number of nodes in the cluster that are disconnected. | 1.3.6.1.4.1.6894.4.1.1.4.8 | Unsigned32 | read-only | current |
| wosClusterConnectedClientsCount OBJECT-TYPE The number of active client connections to the cluster. | 1.3.6.1.4.1.6894.4.1.1.4.9 | Unsigned32 | read-only | current |
| wosClusterObjectCountLow OBJECT-TYPE The total number of objects stored in the cluster. Together with wosClusterObjectCountHigh this composes a 64-bit number. | 1.3.6.1.4.1.6894.4.1.1.4.10 | Unsigned32 | read-only | current |
| wosClusterObjectCountHigh OBJECT-TYPE The total number of objects stored in the cluster. Together with wosClusterObjectCountLow this composes a 64-bit number. | 1.3.6.1.4.1.6894.4.1.1.4.11 | Unsigned32 | read-only | current |
| wosClusterUsableCapacity OBJECT-TYPE The usable capacity of the cluster. | 1.3.6.1.4.1.6894.4.1.1.4.12 | Unsigned32 | read-only | current |
| wosClusterUsedCapacity OBJECT-TYPE The used capacity of the cluster. | 1.3.6.1.4.1.6894.4.1.1.4.13 | Unsigned32 | read-only | current |
| wosClusterFreeCapacity OBJECT-TYPE Total free capacity of the cluster. | 1.3.6.1.4.1.6894.4.1.1.4.14 | Unsigned32 | read-only | current |
| wosZonesInfo OBJECT-IDENTITY | 1.3.6.1.4.1.6894.4.1.1.5 | |||
| wosZoneTable OBJECT-TYPE Table containing cluster zones. | 1.3.6.1.4.1.6894.4.1.1.5.1 | not-accessible | current | |
| wosZoneEntry OBJECT-TYPE An entry in wosZoneTable. | 1.3.6.1.4.1.6894.4.1.1.5.1.1 | not-accessible | current | |
| wosZoneId OBJECT-TYPE An integer that uniquely identifies the zone in the cluster and is the index value for wosZoneTable entries. | 1.3.6.1.4.1.6894.4.1.1.5.1.1.1 | Unsigned32 | not-accessible | current |
| wosZoneName OBJECT-TYPE The name of the zone. | 1.3.6.1.4.1.6894.4.1.1.5.1.1.2 | DisplayString | read-only | current |
| wosZoneNodeCount OBJECT-TYPE The number of nodes accepted into the zone. | 1.3.6.1.4.1.6894.4.1.1.5.1.1.3 | Unsigned32 | read-only | current |
| wosNodesInfo OBJECT-IDENTITY | 1.3.6.1.4.1.6894.4.1.1.6 | |||
| wosNodeTable OBJECT-TYPE Table containing cluster nodes. | 1.3.6.1.4.1.6894.4.1.1.6.1 | not-accessible | current | |
| wosNodeEntry OBJECT-TYPE An entry in wosNodeTable. | 1.3.6.1.4.1.6894.4.1.1.6.1.1 | not-accessible | current | |
| wosNodeIndex OBJECT-TYPE An arbitrary integer used as the index value for wosNodeTable entries. The index value can change at any time. | 1.3.6.1.4.1.6894.4.1.1.6.1.1.1 | Unsigned32 | not-accessible | current |
| wosNodeName OBJECT-TYPE The node name. | 1.3.6.1.4.1.6894.4.1.1.6.1.1.2 | DisplayString | read-only | current |
| wosNodeAddressType OBJECT-TYPE The IP address type of the node. | 1.3.6.1.4.1.6894.4.1.1.6.1.1.3 | InetAddressType | read-only | current |
| wosNodeAddress OBJECT-TYPE The IP address of the node. Refer to wosNodeAddressType to determine the address type. | 1.3.6.1.4.1.6894.4.1.1.6.1.1.4 | InetAddress | read-only | current |
| wosNodeZoneName OBJECT-TYPE The name of the zone that the node belongs to. | 1.3.6.1.4.1.6894.4.1.1.6.1.1.5 | DisplayString | read-only | current |
| wosNodeStatus OBJECT-TYPE The status of the node (e.g. active, connecting, etc.). | 1.3.6.1.4.1.6894.4.1.1.6.1.1.6 | DisplayString | read-only | current |
| wosNodeFwVersion OBJECT-TYPE The version number of the node's firmware. | 1.3.6.1.4.1.6894.4.1.1.6.1.1.7 | DisplayString | read-only | current |
| wosNodeObjectCountLow OBJECT-TYPE The total number of objects stored on the node. Together with wosNodeObjectCountHigh this composes a 64-bit number. | 1.3.6.1.4.1.6894.4.1.1.6.1.1.8 | Unsigned32 | read-only | current |
| wosNodeObjectCountHigh OBJECT-TYPE The total number of objects stored on the node. Together with wosNodeObjectCountLow this composes a 64-bit number. | 1.3.6.1.4.1.6894.4.1.1.6.1.1.9 | Unsigned32 | read-only | current |
| wosNodeTotalCapacity OBJECT-TYPE The total capacity of the node. | 1.3.6.1.4.1.6894.4.1.1.6.1.1.10 | Unsigned32 | read-only | current |
| wosNodeUsedCapacity OBJECT-TYPE The used capacity of the node. | 1.3.6.1.4.1.6894.4.1.1.6.1.1.11 | Unsigned32 | read-only | current |
| wosNodePercentFull OBJECT-TYPE The used capacity of the node as a percentage of the total capacity. | 1.3.6.1.4.1.6894.4.1.1.6.1.1.12 | Gauge32 (0..100) | read-only | current |
| wosPendingNodeTable OBJECT-TYPE Table containing pending nodes. | 1.3.6.1.4.1.6894.4.1.1.6.2 | not-accessible | current | |
| wosPendingNodeEntry OBJECT-TYPE An entry in wosPendingNodeTable. | 1.3.6.1.4.1.6894.4.1.1.6.2.1 | not-accessible | current | |
| wosPendingNodeIndex OBJECT-TYPE An arbitrary integer used as the index value for wosPendingNodeTable entries. The index value can change at any time. | 1.3.6.1.4.1.6894.4.1.1.6.2.1.1 | Unsigned32 | not-accessible | current |
| wosPendingNodeAddressType OBJECT-TYPE The IP address type of the pending node. | 1.3.6.1.4.1.6894.4.1.1.6.2.1.2 | InetAddressType | read-only | current |
| wosPendingNodeAddress OBJECT-TYPE The IP address of the pending node. Refer to wosPendingNodeAddressType to determine the address type. | 1.3.6.1.4.1.6894.4.1.1.6.2.1.3 | InetAddress | read-only | current |
| wosPendingNodeStatus OBJECT-TYPE The status of the pending node (e.g. pending, pending (upgrading), etc.). | 1.3.6.1.4.1.6894.4.1.1.6.2.1.4 | DisplayString | read-only | current |
| wosNodeDriveTable OBJECT-TYPE Table containing details about a node's disk drives. | 1.3.6.1.4.1.6894.4.1.1.6.3 | not-accessible | current | |
| wosNodeDriveEntry OBJECT-TYPE An entry in wosNodeDriveTable. | 1.3.6.1.4.1.6894.4.1.1.6.3.1 | not-accessible | current | |
| wosNodeDriveSlotNbr OBJECT-TYPE The slot number of the node that the drive is installed in. | 1.3.6.1.4.1.6894.4.1.1.6.3.1.1 | Unsigned32 | not-accessible | current |
| wosNodeDriveNodeName OBJECT-TYPE The name of the node that the drive is installed in. | 1.3.6.1.4.1.6894.4.1.1.6.3.1.2 | DisplayString | read-only | current |
| wosNodeDriveMfgr OBJECT-TYPE The drive manufacturer. | 1.3.6.1.4.1.6894.4.1.1.6.3.1.3 | DisplayString | read-only | current |
| wosNodeDriveModel OBJECT-TYPE The drive model number. | 1.3.6.1.4.1.6894.4.1.1.6.3.1.4 | DisplayString | read-only | current |
| wosNodeDriveSerialNbr OBJECT-TYPE The drive serial number. | 1.3.6.1.4.1.6894.4.1.1.6.3.1.5 | DisplayString | read-only | current |
| wosNodeDriveStatus OBJECT-TYPE The status of the drive (e.g. down, not present, etc.). | 1.3.6.1.4.1.6894.4.1.1.6.3.1.6 | DisplayString | read-only | current |
| wosNodeDriveCapacity OBJECT-TYPE The total capacity of the drive. | 1.3.6.1.4.1.6894.4.1.1.6.3.1.7 | Unsigned32 | read-only | current |
| wosPoliciesInfo OBJECT-IDENTITY | 1.3.6.1.4.1.6894.4.1.1.7 | |||
| wosPolicyTable OBJECT-TYPE Table containing policies. | 1.3.6.1.4.1.6894.4.1.1.7.1 | not-accessible | current | |
| wosPolicyEntry OBJECT-TYPE An entry in wosPolicyTable. | 1.3.6.1.4.1.6894.4.1.1.7.1.1 | not-accessible | current | |
| wosPolicyIndex OBJECT-TYPE An arbitrary integer used as an index value for wosPolicyTable entries. The index value can change at any time. | 1.3.6.1.4.1.6894.4.1.1.7.1.1.1 | Unsigned32 | not-accessible | current |
| wosPolicyReplicaIndex OBJECT-TYPE An integer used as an index value for a zone replica in wosPolicyTable entries. The first zone replica in a policy is assigned starting at index 1 and the remaining zone replicas are assigned indices in ascending order. | 1.3.6.1.4.1.6894.4.1.1.7.1.1.2 | Unsigned32 | not-accessible | current |
| wosPolicyId OBJECT-TYPE The ID number of the policy. | 1.3.6.1.4.1.6894.4.1.1.7.1.1.3 | DisplayString | read-only | current |
| wosPolicyName OBJECT-TYPE The name of the policy. | 1.3.6.1.4.1.6894.4.1.1.7.1.1.4 | DisplayString | read-only | current |
| wosPolicyReplicaZoneName OBJECT-TYPE The name of the zone containing replicas for the policy. | 1.3.6.1.4.1.6894.4.1.1.7.1.1.5 | DisplayString | read-only | current |
| wosPolicyReplicaCount OBJECT-TYPE The number of replicas in the zone for the policy. | 1.3.6.1.4.1.6894.4.1.1.7.1.1.6 | Unsigned32 | read-only | current |
| wosPolicyReplicationType OBJECT-TYPE The replication type of the policy. | 1.3.6.1.4.1.6894.4.1.1.7.1.1.7 | DisplayString | read-only | current |
| wosPolicyLocalDataProtection OBJECT-TYPE True if local data protection is enabled for the policy. | 1.3.6.1.4.1.6894.4.1.1.7.1.1.8 | TruthValue | read-only | current |
| wosPolicyObjCountLow OBJECT-TYPE The total number of objects stored against the policy. Together with wosPolicyObjCountHigh this composes a 64-bit number. | 1.3.6.1.4.1.6894.4.1.1.7.1.1.9 | Unsigned32 | read-only | current |
| wosPolicyObjCountHigh OBJECT-TYPE The total number of objects stored against the policy. Together with wosPolicyObjCountLow this composes a 64-bit number. | 1.3.6.1.4.1.6894.4.1.1.7.1.1.10 | Unsigned32 | read-only | current |
| wosPolicyNonComplObjCountLow OBJECT-TYPE The total number of non-compliant objects stored against the policy. Together with wosPolicyObjCountHigh this composes a 64-bit number. | 1.3.6.1.4.1.6894.4.1.1.7.1.1.11 | Unsigned32 | read-only | current |
| wosPolicyNonComplObjCountHigh OBJECT-TYPE The total number of non-compliant objects stored against the policy. Together with wosPolicyObjCountLow this composes a 64-bit number. | 1.3.6.1.4.1.6894.4.1.1.7.1.1.12 | Unsigned32 | read-only | current |
| wosPolicyUsedCapacity OBJECT-TYPE The total capacity used by the policy. | 1.3.6.1.4.1.6894.4.1.1.7.1.1.13 | Unsigned32 | read-only | current |
| wosPrefsInfo OBJECT-IDENTITY | 1.3.6.1.4.1.6894.4.1.1.8 | |||
| wosPrefStoreUnderReplObjs OBJECT-TYPE True if storage of under-replicated objects is allowed. | 1.3.6.1.4.1.6894.4.1.1.8.1 | TruthValue | read-only | current |
| wosPrefNodeDownDelay OBJECT-TYPE The node down delay time. | 1.3.6.1.4.1.6894.4.1.1.8.2 | Unsigned32 | read-only | current |
| wosPrefEmailAlertNewInterval OBJECT-TYPE The minimum delay time between notifications of new alerts. | 1.3.6.1.4.1.6894.4.1.1.8.3 | Unsigned32 | read-only | current |
| wosPrefEmailAlertRmndrInterval OBJECT-TYPE The minimum delay time between reminders of existing alerts. | 1.3.6.1.4.1.6894.4.1.1.8.4 | Unsigned32 | read-only | current |
| wosPrefEmailAlertFromAddr OBJECT-TYPE The From address for email alerts. | 1.3.6.1.4.1.6894.4.1.1.8.5 | DisplayString | read-only | current |
| wosPrefEmailAlertRecipientTable OBJECT-TYPE Table containing email alert recipients. | 1.3.6.1.4.1.6894.4.1.1.8.6 | not-accessible | current | |
| wosPrefEmailAlertRecipientEntry OBJECT-TYPE An entry in wosPrefEmailAlertRecipientTable. | 1.3.6.1.4.1.6894.4.1.1.8.6.1 | not-accessible | current | |
| wosPrefEmailAlertRecipientIndex OBJECT-TYPE Email alert table index. | 1.3.6.1.4.1.6894.4.1.1.8.6.1.1 | Unsigned32 | not-accessible | current |
| wosPrefEmailAlertRecipient OBJECT-TYPE The email alert recipient. | 1.3.6.1.4.1.6894.4.1.1.8.6.1.2 | DisplayString | read-only | current |
| wosPrefEmailAlertServerTable OBJECT-TYPE Table containing outgoing email servers for email alerts. | 1.3.6.1.4.1.6894.4.1.1.8.7 | not-accessible | current | |
| wosPrefEmailAlertServerEntry OBJECT-TYPE An entry in wosPrefEmailAlertServerTable. | 1.3.6.1.4.1.6894.4.1.1.8.7.1 | not-accessible | current | |
| wosPrefEmailAlertServerIndex OBJECT-TYPE Email alert server table index. | 1.3.6.1.4.1.6894.4.1.1.8.7.1.1 | Unsigned32 | not-accessible | current |
| wosPrefEmailAlertServer OBJECT-TYPE The outgoing email server for email alerts. | 1.3.6.1.4.1.6894.4.1.1.8.7.1.2 | DisplayString | read-only | current |
| wosPrefSnmpManagerTable OBJECT-TYPE Table containing SNMP managers. | 1.3.6.1.4.1.6894.4.1.1.8.8 | not-accessible | current | |
| wosPrefSnmpManagerEntry OBJECT-TYPE An entry in wosPrefSnmpManagerTable. | 1.3.6.1.4.1.6894.4.1.1.8.8.1 | not-accessible | current | |
| wosPrefSnmpManagerIndex OBJECT-TYPE SNMP Manager table index. | 1.3.6.1.4.1.6894.4.1.1.8.8.1.1 | Unsigned32 | not-accessible | current |
| wosPrefSnmpManager OBJECT-TYPE The SNMP manager. | 1.3.6.1.4.1.6894.4.1.1.8.8.1.2 | DisplayString | read-only | current |
| wosPrefSnmpTrapCommunityName OBJECT-TYPE The community name for the SNMP traps. | 1.3.6.1.4.1.6894.4.1.1.8.9 | DisplayString | read-only | current |
| wosPrefMgmtIpFilterTable OBJECT-TYPE Table containing management IP filters. | 1.3.6.1.4.1.6894.4.1.1.8.10 | not-accessible | current | |
| wosPrefMgmtIpFilterEntry OBJECT-TYPE An entry in wosPrefMgmtIpFilterTable. | 1.3.6.1.4.1.6894.4.1.1.8.10.1 | not-accessible | current | |
| wosPrefMgmtIpFilterIndex OBJECT-TYPE Management IP filter table index. | 1.3.6.1.4.1.6894.4.1.1.8.10.1.1 | Unsigned32 | not-accessible | current |
| wosPrefMgmtIpFilter OBJECT-TYPE The management IP filter. | 1.3.6.1.4.1.6894.4.1.1.8.10.1.2 | DisplayString | read-only | current |
| wosPrefClientIpFilterTable OBJECT-TYPE Table containing client I/O IP filters. | 1.3.6.1.4.1.6894.4.1.1.8.11 | not-accessible | current | |
| wosPrefClientIpFilterEntry OBJECT-TYPE An entry in wosPrefClientIpFilterTable. | 1.3.6.1.4.1.6894.4.1.1.8.11.1 | not-accessible | current | |
| wosPrefClientIpFilterIndex OBJECT-TYPE Client I/O IP filter table index. | 1.3.6.1.4.1.6894.4.1.1.8.11.1.1 | Unsigned32 | not-accessible | current |
| wosPrefClientIpFilter OBJECT-TYPE The client I/O IP filter. | 1.3.6.1.4.1.6894.4.1.1.8.11.1.2 | DisplayString | read-only | current |
| wosPrefSyslogFacility OBJECT-TYPE The Syslog Facility. user (1) - random user-level messages mail (2) - mail system daemon (3) - system daemons auth (4) - security/authorization messages syslog (5) - messages generated internally by syslogd lpr (6) - line printer subsystem news (7) - network news subsystem uucp (8) - UUCP subsystem cron (9) - clock daemon authpriv (10) - security/authorization messages (private) ftp (11) - ftp daemon local0 (16) - reserved for local use local1 (17) - reserved for local use local2 (18) - reserved for local use local3 (19) - reserved for local use local4 (20) - reserved for local use local5 (21) - reserved for local use local6 (22) - reserved for local use local7 (23) - reserved for local use | 1.3.6.1.4.1.6894.4.1.1.8.12 | WosSyslogFacility | read-only | current |
| wosPrefSyslogRemoteHost OBJECT-TYPE The remote syslog host. | 1.3.6.1.4.1.6894.4.1.1.8.13 | DisplayString | read-only | current |
| wosConformance OBJECT-IDENTITY | 1.3.6.1.4.1.6894.4.1.2 | |||
| wosCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.6894.4.1.2.1 | |||
| wosGroups OBJECT-IDENTITY | 1.3.6.1.4.1.6894.4.1.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| wosTrapMessage NOTIFICATION-TYPE This notification is sent whenever a cluster alert is generated. | 1.3.6.1.4.1.6894.4.1.0.1 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| wosCompliance MODULE-COMPLIANCE The compliance statement for WOS nodes implementing the DDN-WOS-MIB. | 1.3.6.1.4.1.6894.4.1.2.1.1 | current |
| wosEventsGroup NOTIFICATION-GROUP This groups defines the set of notification types. | 1.3.6.1.4.1.6894.4.1.2.2.1 | current |
| wosNotificationsGroup OBJECT-GROUP This group defines the set of notification objects. | 1.3.6.1.4.1.6894.4.1.2.2.2 | current |
| wosStatsGroup OBJECT-GROUP This group defines the set of statistics objects. | 1.3.6.1.4.1.6894.4.1.2.2.3 | current |
| wosAlertsGroup OBJECT-GROUP This group defines the set of alert objects. | 1.3.6.1.4.1.6894.4.1.2.2.4 | current |
| wosClusterGroup OBJECT-GROUP This group defines the set of cluster objects. | 1.3.6.1.4.1.6894.4.1.2.2.5 | current |
| wosZonesGroup OBJECT-GROUP This group defines the set of zone objects. | 1.3.6.1.4.1.6894.4.1.2.2.6 | current |
| wosNodesGroup OBJECT-GROUP This group defines the set of node objects. | 1.3.6.1.4.1.6894.4.1.2.2.7 | current |
| wosPoliciesGroup OBJECT-GROUP This group defines the set of policy objects. | 1.3.6.1.4.1.6894.4.1.2.2.8 | current |
| wosPrefsGroup OBJECT-GROUP This group defines the set of preferences objects. | 1.3.6.1.4.1.6894.4.1.2.2.9 | current |