DASAN-DSL-MIB
- Registered at
- 1.3.6.1.4.1.6296.9.3
- Last updated
- 2001-04-19 00:00
- Organization
- Dasan Co., Ltd.
- Namespace
- dasan
- Source file
DASAN-DSL-MIB- Digest
sha256:896a0bd672d9e1dbc63233be5277e857f140eb94b65273f83ff96d71f5f25d7f
Description
The MIB module to describe SDSL product.
Contact
Dasan Co., Ltd.
Imports
| From | Symbols |
|---|---|
| DASAN-SMI | dasanMgmt |
| IF-MIB | ifIndex |
| SLE-TC-MIB | SleControlRequestResultType, SleControlStatusType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
DASAN-DSL-MIB DASAN-SMI IANAifType-MIB IF-MIB SLE-TC-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| dasanDslMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.1 | |||
| dsDslSystem OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.1.1 | |||
| dsDslModules OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.1.2 | |||
| moduleNumber OBJECT-TYPE The number of DSL modules (regardless of their current state) present on this system. | 1.3.6.1.4.1.6296.9.3.1.2.1 | INTEGER | read-only | obsolete |
| moduleTableLastChange OBJECT-TYPE The value of sysUpTime at the time of the last creation or deletion of an entry in the moduleTable. If the number of entries has been unchanged since the last re-initialization of the local network management subsystem, then this object contains a zero value. | 1.3.6.1.4.1.6296.9.3.1.2.2 | TimeTicks | read-only | obsolete |
| moduleTable OBJECT-TYPE A list of module entries. The number of entries is given by the value of moduleNumber. | 1.3.6.1.4.1.6296.9.3.1.2.3 | not-accessible | current | |
| moduleEntry OBJECT-TYPE An entry containing management information applicable to a particular module. | 1.3.6.1.4.1.6296.9.3.1.2.3.1 | not-accessible | current | |
| moduleIndex OBJECT-TYPE A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. | 1.3.6.1.4.1.6296.9.3.1.2.3.1.1 | INTEGER | read-only | obsolete |
| moduleDescr OBJECT-TYPE A textual string containing information about the module. This string should include the name of the manufacturer, the product name and the version of the interface hardware/software. | 1.3.6.1.4.1.6296.9.3.1.2.3.1.2 | DisplayString | read-only | obsolete |
| moduleType OBJECT-TYPE The type of module. This string defines the type of DSL module type. For instance, this can be SDSL, VDSL or SDSL. | 1.3.6.1.4.1.6296.9.3.1.2.3.1.3 | DisplayString | read-only | obsolete |
| modulePhysAddress OBJECT-TYPE The module's address at its ethernet interface. For example, this object normally contains a MAC address. | 1.3.6.1.4.1.6296.9.3.1.2.3.1.4 | PhysAddress | read-only | obsolete |
| moduleOperStatus OBJECT-TYPE The current operational state of the module. | 1.3.6.1.4.1.6296.9.3.1.2.3.1.5 | INTEGER {up(1), down(2)} | read-only | obsolete |
| moduleUpTime OBJECT-TYPE Elasped time since this module has been boot up. | 1.3.6.1.4.1.6296.9.3.1.2.3.1.6 | DisplayString | read-only | obsolete |
| moduleAvailableMemory OBJECT-TYPE The amount of free memory in this module. | 1.3.6.1.4.1.6296.9.3.1.2.3.1.7 | INTEGER | read-only | obsolete |
| modulePortNumber OBJECT-TYPE The number of ethernet ports and ethernet-like DSL ports (regardless of their current state) present on this module. | 1.3.6.1.4.1.6296.9.3.1.2.3.1.8 | INTEGER | read-only | obsolete |
| modulePortIndexBase OBJECT-TYPE Port index base for this module. Port index range of this module is from modulePortIndexBase to (modulePortInexBase + modulePortNumber - 1). | 1.3.6.1.4.1.6296.9.3.1.2.3.1.9 | INTEGER | read-only | obsolete |
| moduleSpecific OBJECT-TYPE A reference to MIB definitions specific to the particular media being used to realize the module. It is recommended that this value point to an instance of a MIB object in the media-specific MIB, i.e., that this object have the semantics associated with the InstancePointer textual convention defined in RFC 1903. In fact, it is recommended that the module- specific MIB specify what value moduleSpecific should/can take for values of moduleType. If no MIB definitions specific to the particular media are available, the value should be set to the OBJECT IDENTIFIER { 0 0 }. | 1.3.6.1.4.1.6296.9.3.1.2.3.1.10 | OBJECT IDENTIFIER | read-only | obsolete |
| dsDslPorts OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.1.3 | |||
| dsDslPortNumber OBJECT-TYPE The number of DSL modules (regardless of their current state) present on this system. | 1.3.6.1.4.1.6296.9.3.1.3.1 | INTEGER | read-only | obsolete |
| dsDslPortTable OBJECT-TYPE A list of module entries. The number of entries is given by the value of moduleNumber. | 1.3.6.1.4.1.6296.9.3.1.3.2 | not-accessible | current | |
| dsDslPortEntry OBJECT-TYPE An entry containing management information applicable to a particular port. | 1.3.6.1.4.1.6296.9.3.1.3.2.1 | not-accessible | current | |
| portIndex OBJECT-TYPE A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. | 1.3.6.1.4.1.6296.9.3.1.3.2.1.1 | INTEGER | read-only | obsolete |
| portDescr OBJECT-TYPE A textual string containing information about the port. | 1.3.6.1.4.1.6296.9.3.1.3.2.1.2 | DisplayString | read-only | obsolete |
| portType OBJECT-TYPE The type of communication port. This string defines the type of port. Each module has one or more ethernet port(s) and xDSL ports. | 1.3.6.1.4.1.6296.9.3.1.3.2.1.3 | DisplayString | read-only | obsolete |
| portIfIndex OBJECT-TYPE ifIndex which is defined in interface mib. | 1.3.6.1.4.1.6296.9.3.1.3.2.1.4 | INTEGER | read-only | obsolete |
| portAdminStatus OBJECT-TYPE The current administrative state of the port. | 1.3.6.1.4.1.6296.9.3.1.3.2.1.5 | INTEGER {up(1), down(26)} | read-only | obsolete |
| portOperStatus OBJECT-TYPE The current operational state of the port. | 1.3.6.1.4.1.6296.9.3.1.3.2.1.6 | INTEGER {up(1), down(2)} | read-only | obsolete |
| portModemStatus OBJECT-TYPE idle : system does not try to establish modem link. trying : system is trying to establish modem link. established : modem link has been established. If trying is written, modem will be reset and the system will try to re-establish modem link. If idle is set, system will not manage modem connection. When established is written, it will be ignored silently. | 1.3.6.1.4.1.6296.9.3.1.3.2.1.7 | INTEGER {idle(1), trying(2), established(3)} | read-write | obsolete |
| portLineQuality OBJECT-TYPE The ascii string which describes the quality of link. Description can be distinct for DSL link type. | 1.3.6.1.4.1.6296.9.3.1.3.2.1.8 | DisplayString | read-only | obsolete |
| portUpStreamSpeed OBJECT-TYPE An estimate of the port's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295). For a sub-layer which has no concept of bandwidth, this object should be zero. | 1.3.6.1.4.1.6296.9.3.1.3.2.1.9 | INTEGER | read-only | obsolete |
| portDownStreamSpeed OBJECT-TYPE An estimate of the port's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295). For a sub-layer which has no concept of bandwidth, this object should be zero. | 1.3.6.1.4.1.6296.9.3.1.3.2.1.10 | INTEGER | read-only | obsolete |
| portLastModemStatusChange OBJECT-TYPE Elasped time since modem status has been changed. | 1.3.6.1.4.1.6296.9.3.1.3.2.1.11 | DisplayString | read-only | obsolete |
| portSpecific OBJECT-TYPE A reference to MIB definitions specific to the particular media being used to realize the module. It is recommended that this value point to an instance of a MIB object in the media-specific MIB, i.e., that this object have the semantics associated with the InstancePointer textual convention defined in RFC 1903. In fact, it is recommended that the module- specific MIB specify what value moduleSpecific should/can take for values of moduleType. If no MIB definitions specific to the particular media are available, the value should be set to the OBJECT IDENTIFIER { 0 0 }. | 1.3.6.1.4.1.6296.9.3.1.3.2.1.12 | OBJECT IDENTIFIER | read-only | obsolete |
| dsDslLearnedMacs OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.1.4 | |||
| macNumber OBJECT-TYPE The number of DSL modules (regardless of their current state) present on this system. | 1.3.6.1.4.1.6296.9.3.1.4.1 | INTEGER | read-only | obsolete |
| macTable OBJECT-TYPE A list of module entries. The number of entries is given by the value of moduleNumber. | 1.3.6.1.4.1.6296.9.3.1.4.2 | not-accessible | current | |
| macEntry OBJECT-TYPE Each entry contains one MAC address and its aging time. | 1.3.6.1.4.1.6296.9.3.1.4.2.1 | not-accessible | deprecated | |
| macIndex OBJECT-TYPE MAC table entry index. | 1.3.6.1.4.1.6296.9.3.1.4.2.1.1 | INTEGER | read-only | obsolete |
| macAddress OBJECT-TYPE MAC address learned on this port. | 1.3.6.1.4.1.6296.9.3.1.4.2.1.2 | PhysAddress | read-only | obsolete |
| agingTime OBJECT-TYPE Elapased time since last RX activity from this MAC-addressed host. | 1.3.6.1.4.1.6296.9.3.1.4.2.1.3 | INTEGER | read-only | obsolete |
| dasanDslMIBObjects2 OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.2 | |||
| dsVdslNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.2.0 | |||
| dsVdslSystemBaseInfo OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.2.1 | |||
| dsVdslSystemFWVersion OBJECT-TYPE . | 1.3.6.1.4.1.6296.9.3.2.1.1 | OCTET STRING | read-only | current |
| dsVdslSystemLowPowerMode OBJECT-TYPE . | 1.3.6.1.4.1.6296.9.3.2.1.2 | INTEGER {disable(0), enable(1)} | read-write | current |
| dsVdslSystemBmeReset OBJECT-TYPE select bme-number to reset | 1.3.6.1.4.1.6296.9.3.2.1.3 | Integer32 | read-write | current |
| dsVdslSystemUpboConfTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.1.50 | not-accessible | current | |
| dsVdslSystemUpboConfEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.1.50.1 | not-accessible | current | |
| dsVdslSystemUpboConfLength OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.1.50.1.1 | INTEGER | read-only | current |
| dsVdslSystemUpboConfArrayK1 OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.1.50.1.2 | OCTET STRING | read-write | current |
| dsVdslSystemUpboConfArrayK2 OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.1.50.1.3 | OCTET STRING | read-write | current |
| dsVdslStatus OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.2.2 | |||
| dsVdslStatusBitAlloc OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.2.2.1 | |||
| dsVdslStatusBAIfindex OBJECT-TYPE . | 1.3.6.1.4.1.6296.9.3.2.2.1.1 | Integer32 | read-write | current |
| dsVdslStatusBAPhySide OBJECT-TYPE . | 1.3.6.1.4.1.6296.9.3.2.2.1.2 | INTEGER {rx(1), tx(2)} | read-write | current |
| dsVdslStatusBASectionSize OBJECT-TYPE . | 1.3.6.1.4.1.6296.9.3.2.2.1.3 | Integer32 | read-write | current |
| dsVdslStatusBAAction OBJECT-TYPE . | 1.3.6.1.4.1.6296.9.3.2.2.1.4 | INTEGER {get(1)} | read-write | current |
| dsVdslStatusBAStatus OBJECT-TYPE . | 1.3.6.1.4.1.6296.9.3.2.2.1.5 | INTEGER {idle(1), busy(2), passed(3), failed(4)} | read-only | current |
| dsVdslStatusBALastTime OBJECT-TYPE . | 1.3.6.1.4.1.6296.9.3.2.2.1.6 | OCTET STRING | read-only | current |
| dsVdslStatusBATable OBJECT-TYPE . | 1.3.6.1.4.1.6296.9.3.2.2.1.7 | not-accessible | current | |
| dsVdslStatusBAEntry OBJECT-TYPE . | 1.3.6.1.4.1.6296.9.3.2.2.1.7.1 | not-accessible | current | |
| dsVdslStatusBASectionIndex OBJECT-TYPE . | 1.3.6.1.4.1.6296.9.3.2.2.1.7.1.1 | INTEGER | not-accessible | current |
| dsVdslStatusBABitLoading OBJECT-TYPE . | 1.3.6.1.4.1.6296.9.3.2.2.1.7.1.2 | Integer32 | read-only | current |
| dsVdslLine OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.2.3 | |||
| dsVdslLinePsdShaping OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.2.3.1 | |||
| dsVdslLinePsdShapingTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.1.1 | not-accessible | current | |
| dsVdslLinePsdShapingEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.1.1.1 | not-accessible | current | |
| dsVdslLinePsdShapingUsFlag OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.1.1.1.1 | INTEGER {disable(0), enableAuto(1), enableManual(2), enableStandard(3)} | read-write | current |
| dsVdslLinePsdShapingUsEwlName OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.1.1.1.2 | INTEGER {us0(0), us50(1), us100(2), us150(3), us200(4), us250(5), us300(6), us350(7), us400(8), us450(9), us500(10), us550(11), us600(12), us650(13), us700(14), us750(15), us800(16), us850(17), us900(18), us950(19), usFull(20)} | read-write | current |
| dsVdslLinePsdShapingUsEwlLength OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.1.1.1.3 | Integer32 | read-write | current |
| dsVdslLinePsdShapingUsRetryCount OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.1.1.1.4 | Integer32 | read-write | current |
| dsVdslLinePsdShapingUsAutoStatus OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.1.1.1.5 | INTEGER {none(0), userClear(1), linkOn(2), training(3), adminDown(4)} | read-write | current |
| dsVdslLinePsdShapingUsAutoDr OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.1.1.1.6 | INTEGER {us0(0), us50(1), us100(2), us150(3), us200(4), us250(5), us300(6), us350(7), us400(8), us450(9), us500(10), us550(11), us600(12), us650(13), us700(14), us750(15), us800(16), us850(17), us900(18), us950(19), usFull(20)} | read-write | current |
| dsVdslLinePsdShapingUsCurrentTryCount OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.1.1.1.7 | Integer32 | read-write | current |
| dsVdslLinePsdShapingUsEwlOnAutoDr OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.1.1.1.8 | Integer32 | read-write | current |
| dsVdslLinePsdShapingUsClearAutoDr OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.1.1.1.11 | INTEGER {clear(1)} | read-write | current |
| dsVdslLinePsdShapingUsMethodType OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.1.1.1.13 | INTEGER {methodNormal(0), method50mTo950m(1), method50mToFull(2)} | read-write | current |
| dsVdslLinePsdShapingUsStepCount OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.1.1.1.14 | Integer32 | read-write | current |
| dsVdslLinePsdShapingDsFlag OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.1.1.1.21 | INTEGER {disable(0), enable(1)} | read-write | current |
| dsVdslLinePsdShapingDsEwlName OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.1.1.1.22 | INTEGER {ds0(0), ds250(1), ds500(2), ds750(3), ds1000(4), ds1250(5), ds1500(6), ds1750(7), ds2000(8), ds2250(9), ds2500(10), ds2750(11), ds3000(12), ds3250(13), ds3500(14), ds3750(15), ds4000(16), ds4250(17), ds4500(18), ds4750(19)} | read-write | current |
| dsVdslLinePsdShapingDsEwlLength OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.1.1.1.23 | Integer32 | read-write | current |
| dsVdslLinePsdShapingDsFreqMin OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.1.1.1.24 | Integer32 | read-write | current |
| dsVdslLinePsdShapingDsFreqMax OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.1.1.1.25 | Integer32 | read-write | current |
| dsVdslLineConfig OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.2.3.2 | |||
| dsVdslLineConfigTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.2.1 | not-accessible | current | |
| dsVdslLineConfigEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.2.1.1 | not-accessible | current | |
| dsVdslLineConfMicroCut OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.2.1.1.1 | INTEGER {enable(1), disable(2)} | read-write | current |
| dsVdslLineConfigMicroCutThreshold OBJECT-TYPE -1 means default threshold value. | 1.3.6.1.4.1.6296.9.3.2.3.2.1.1.2 | Integer32 (1..10000) | read-write | current |
| dsVdslLineConfigMicroCutStatTotal OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.2.1.1.3 | Integer32 | read-only | current |
| dsVdslLineConfigMicroCutStatCurrent OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.2.1.1.4 | Integer32 | read-only | current |
| dsVdslLineConfigMicroCutStatLinkdown OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.2.1.1.5 | Integer32 | read-only | current |
| dsVdslLineConfigMicroCutStatCleared OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.2.1.1.6 | INTEGER {clearAll(1), clearTotal(2), clearCurrent(3), clearLinkdown(4)} | read-write | current |
| dsVdslLineConfigTrustSnr OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.2.1.1.7 | INTEGER {enable(0), disable(1)} | read-write | current |
| dsVdslLineConfigTrustSnrThreshUpMargin OBJECT-TYPE -1 means default value | 1.3.6.1.4.1.6296.9.3.2.3.2.1.1.8 | Integer32 (0..31) | read-write | current |
| dsVdslLineConfigTrustSnrThreshUpTime OBJECT-TYPE -1 means default value | 1.3.6.1.4.1.6296.9.3.2.3.2.1.1.9 | Integer32 (1..10000) | read-write | current |
| dsVdslLineConfigTrustSnrThreshDownMargin OBJECT-TYPE -1 means default value | 1.3.6.1.4.1.6296.9.3.2.3.2.1.1.10 | Integer32 (0..31) | read-write | current |
| dsVdslLineConfigTrustSnrThreshDownTime OBJECT-TYPE -1 means default value | 1.3.6.1.4.1.6296.9.3.2.3.2.1.1.11 | Integer32 (1..10000) | read-write | current |
| dsVdslLineConfigTrustSnrStatUpRunning OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.2.1.1.12 | Integer32 | read-only | current |
| dsVdslLineConfigTrustSnrStatUpTime OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.2.1.1.13 | Integer32 | read-only | current |
| dsVdslLineConfigTrustSnrStatDownRunning OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.2.1.1.14 | Integer32 | read-only | current |
| dsVdslLineConfigTrustSnrStatDownTime OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.2.1.1.15 | Integer32 | read-only | current |
| dsVdslLineConfigTrustSnrStatLinkdown OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.2.1.1.16 | Integer32 | read-only | current |
| dsVdslLineConfigTrustSnrStatCleared OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.2.1.1.17 | INTEGER {clearAll(1), clearUpRunning(2), clearUpTime(3), clearDownRunning(4), clearDownTime(5), clearLinkdown(6)} | read-write | current |
| dsVdslLineStatus OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.2.3.11 | |||
| dsVdslLineStatusTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.11.1 | not-accessible | current | |
| dsVdslLineStatusEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.11.1.1 | not-accessible | current | |
| dsVdslLineStatusCpeLinkdownReason OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.3.11.1.1.1 | INTEGER {notSupport(-1), lossOfPower(0), portStop(1), lossOfSignalPM(2), lossOfSignalNonPM(3), lossOfFramePM(4), lossOfFrameNonPM(5), excessiveSevereError(6), iniCRC(7), cRC(8), feLPR(9), feLOS(10), feLOF(11), feESE(12), feIniCRC(13), feCRC(14), unknownFailure(15)} | read-only | current |
| dsVdslPM OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.2.5 | |||
| dsVdslPMMediaAdaptor OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.2.5.1 | |||
| dsVdslPMMATable OBJECT-TYPE . | 1.3.6.1.4.1.6296.9.3.2.5.1.1 | not-accessible | current | |
| dsVdslPMMAEntry OBJECT-TYPE . | 1.3.6.1.4.1.6296.9.3.2.5.1.1.1 | not-accessible | current | |
| dsVdslPMMARxFrameCount OBJECT-TYPE . | 1.3.6.1.4.1.6296.9.3.2.5.1.1.1.1 | Counter64 | read-only | current |
| dsVdslPMMARxCRCErr OBJECT-TYPE . | 1.3.6.1.4.1.6296.9.3.2.5.1.1.1.2 | Counter64 | read-only | current |
| dsVdslPMMARxDrop OBJECT-TYPE . | 1.3.6.1.4.1.6296.9.3.2.5.1.1.1.3 | Counter64 | read-only | current |
| dsVdslPMMATxFrameCount OBJECT-TYPE . | 1.3.6.1.4.1.6296.9.3.2.5.1.1.1.4 | Counter64 | read-only | current |
| dsVdslPMMATxDrop OBJECT-TYPE . | 1.3.6.1.4.1.6296.9.3.2.5.1.1.1.5 | Counter64 | read-only | current |
| dsVdslPMMAEnetCrcErrCnt OBJECT-TYPE . | 1.3.6.1.4.1.6296.9.3.2.5.1.1.1.6 | Counter64 | read-only | current |
| dsVdslPMMACleared OBJECT-TYPE . | 1.3.6.1.4.1.6296.9.3.2.5.1.1.1.7 | TimeTicks | read-only | current |
| dsVdslPMStatCount OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.2.5.2 | |||
| dsVdslPMCoStatTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.1 | not-accessible | current | |
| dsVdslPMCoStatEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.1.1 | not-accessible | current | |
| dsVdslPMLos OBJECT-TYPE The LOS total statistic value. set to 0 to clear count. | 1.3.6.1.4.1.6296.9.3.2.5.2.1.1.1 | Unsigned32 | read-write | current |
| dsVdslPMLof OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.1.1.2 | Unsigned32 | read-write | current |
| dsVdslPMLol OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.1.1.3 | Unsigned32 | read-write | current |
| dsVdslPMCorrBlk OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.1.1.4 | Unsigned32 | read-write | current |
| dsVdslPMUnCorrBlk OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.1.1.5 | Unsigned32 | read-write | current |
| dsVdslPMCRC OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.1.1.6 | Unsigned32 | read-write | current |
| dsVdslPMServiceError OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.1.1.7 | Unsigned32 | read-write | current |
| dsVdslPMLoss OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.1.1.18 | Unsigned32 | read-write | current |
| dsVdslPMLofs OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.1.1.19 | Unsigned32 | read-write | current |
| dsVdslPMLols OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.1.1.20 | Unsigned32 | read-write | current |
| dsVdslPMESs OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.1.1.21 | Unsigned32 | read-write | current |
| dsVdslPMSESs OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.1.1.22 | Unsigned32 | read-write | current |
| dsVdslPMUASs OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.1.1.23 | Unsigned32 | read-write | current |
| dsVdslPMCRCs OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.1.1.24 | Unsigned32 | read-write | current |
| dsVdslPM15minElapsedTime OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.1.1.28 | Gauge32 | read-write | current |
| dsVdslPM1dayElapsedTime OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.1.1.29 | Gauge32 | read-write | current |
| dsVdslPMClear OBJECT-TYPE clear all error statistic counter with timer. | 1.3.6.1.4.1.6296.9.3.2.5.2.1.1.30 | INTEGER {clear(1)} | read-write | current |
| dsVdslPMCoStat15minTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.2 | not-accessible | current | |
| dsVdslPMCoStat15minEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.2.1 | not-accessible | current | |
| dsVdslPM15minInterval OBJECT-TYPE Performance Data Interval number 1 is the most recent previous interval; interval 0 is current. | 1.3.6.1.4.1.6296.9.3.2.5.2.2.1.1 | Integer32 (0..1) | not-accessible | current |
| dsVdslPM15minLos OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.2.1.2 | Unsigned32 | read-only | current |
| dsVdslPM15minLof OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.2.1.3 | Unsigned32 | read-only | current |
| dsVdslPM15minLol OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.2.1.4 | Unsigned32 | read-only | current |
| dsVdslPM15minCorrBlk OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.2.1.5 | Unsigned32 | read-only | current |
| dsVdslPM15minUnCorrBlk OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.2.1.6 | Unsigned32 | read-only | current |
| dsVdslPM15minCRC OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.2.1.7 | Unsigned32 | read-only | current |
| dsVdslPM15minServiceError OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.2.1.8 | Unsigned32 | read-only | current |
| dsVdslPM15minLoss OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.2.1.19 | Unsigned32 | read-only | current |
| dsVdslPM15minLofs OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.2.1.20 | Unsigned32 | read-only | current |
| dsVdslPM15minLols OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.2.1.21 | Unsigned32 | read-only | current |
| dsVdslPM15minESs OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.2.1.22 | Unsigned32 | read-only | current |
| dsVdslPM15minSESs OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.2.1.23 | Unsigned32 | read-only | current |
| dsVdslPM15minUASs OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.2.1.24 | Unsigned32 | read-only | current |
| dsVdslPM15minCRCs OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.2.1.25 | Unsigned32 | read-only | current |
| dsVdslPMCoStat1dayTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.3 | not-accessible | current | |
| dsVdslPMCoStat1dayEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.3.1 | not-accessible | current | |
| dsVdslPM1dayInterval OBJECT-TYPE Performance Data Interval number 1 is the most recent previous interval; interval 0 is current. | 1.3.6.1.4.1.6296.9.3.2.5.2.3.1.1 | Integer32 (0..1) | not-accessible | current |
| dsVdslPM1dayLos OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.3.1.2 | Unsigned32 | read-only | current |
| dsVdslPM1dayLof OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.3.1.3 | Unsigned32 | read-only | current |
| dsVdslPM1dayLol OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.3.1.4 | Unsigned32 | read-only | current |
| dsVdslPM1dayCorrBlk OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.3.1.5 | Unsigned32 | read-only | current |
| dsVdslPM1dayUnCorrBlk OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.3.1.6 | Unsigned32 | read-only | current |
| dsVdslPM1dayCRC OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.3.1.7 | Unsigned32 | read-only | current |
| dsVdslPMdayServiceError OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.3.1.8 | Unsigned32 | read-only | current |
| dsVdslPM1dayLoss OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.3.1.19 | Unsigned32 | read-only | current |
| dsVdslPM1dayLofs OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.3.1.20 | Unsigned32 | read-only | current |
| dsVdslPM1dayLols OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.3.1.21 | Unsigned32 | read-only | current |
| dsVdslPM1dayESs OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.3.1.22 | Unsigned32 | read-only | current |
| dsVdslPM1daySESs OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.3.1.23 | Unsigned32 | read-only | current |
| dsVdslPM1dayUASs OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.3.1.24 | Unsigned32 | read-only | current |
| dsVdslPM1dayCRCs OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.3.1.25 | Unsigned32 | read-only | current |
| dsVdslPMCpeStatTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.4 | not-accessible | current | |
| dsVdslPMCpeStatEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.4.1 | not-accessible | current | |
| dsVdslPMCpeLos OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.4.1.1 | Unsigned32 | read-only | current |
| dsVdslPMCpeLof OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.4.1.2 | Unsigned32 | read-only | current |
| dsVdslPMCpeCorrBlk OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.4.1.3 | Unsigned32 | read-only | current |
| dsVdslPMCpeUnCorrBlk OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.4.1.4 | Unsigned32 | read-only | current |
| dsVdslPMCpeCRC OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.4.1.5 | Unsigned32 | read-only | current |
| dsVdslPMCpeClear OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.5.2.4.1.6 | INTEGER {clear(1)} | read-write | current |
| dsVdslProfile OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.2.6 | |||
| dsVdslLineCfgProfile OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.2.6.1 | |||
| dsVdslLineCfgProfileTable OBJECT-TYPE This table contains information on the VDSL line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure the VDSL line. Entries in this table MUST be maintained in a persistent manner. | 1.3.6.1.4.1.6296.9.3.2.6.1.1 | not-accessible | current | |
| dsVdslLineCfgProfileEntry OBJECT-TYPE Each entry consists of a list of parameters that represents the configuration of a VDSL line. A default profile with an index of 'DEFVAL', will always exist and its parameters will be set to vendor specific values, unless otherwise specified in this document. | 1.3.6.1.4.1.6296.9.3.2.6.1.1.1 | not-accessible | current | |
| dsVdslLineCfgProfileName OBJECT-TYPE This object identifies a row in this table. A default profile with an index of 'DEFVAL', will always exist and its parameters will be set to vendor specific values, unless otherwise specified in this document. | 1.3.6.1.4.1.6296.9.3.2.6.1.1.1.1 | DisplayString | not-accessible | current |
| dsVdslLineCfgDownMaxSnrMgn OBJECT-TYPE Specifies the maximum downstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. | 1.3.6.1.4.1.6296.9.3.2.6.1.1.1.4 | Unsigned32 (0..127) | read-create | current |
| dsVdslLineCfgDownMinSnrMgn OBJECT-TYPE Specifies the minimum downstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. | 1.3.6.1.4.1.6296.9.3.2.6.1.1.1.5 | Unsigned32 (0..127) | read-create | current |
| dsVdslLineCfgDownTargetSnrMgn OBJECT-TYPE Specifies the target downstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. This is the Noise Margin the transceivers must achieve with a BER of 10^-7 or better to successfully complete initialization. | 1.3.6.1.4.1.6296.9.3.2.6.1.1.1.6 | Unsigned32 (0..127) | read-create | current |
| dsVdslLineCfgUpMaxSnrMgn OBJECT-TYPE Specifies the maximum upstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. | 1.3.6.1.4.1.6296.9.3.2.6.1.1.1.7 | Unsigned32 (0..127) | read-create | current |
| dsVdslLineCfgUpMinSnrMgn OBJECT-TYPE Specifies the minimum upstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. | 1.3.6.1.4.1.6296.9.3.2.6.1.1.1.8 | Unsigned32 (0..127) | read-create | current |
| dsVdslLineCfgUpTargetSnrMgn OBJECT-TYPE Specifies the target upstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. This is the Noise Margin the transceivers must achieve with a BER of 10^-7 or better to successfully complete initialization. | 1.3.6.1.4.1.6296.9.3.2.6.1.1.1.9 | Unsigned32 (0..127) | read-create | current |
| dsVdslLineCfgDownMaxDataRate OBJECT-TYPE Specifies the maximum downstream slow channel data rate in steps of 1000 bits/second. The maximum aggregate downstream transmit speed of the line can be derived from the sum of maximum downstream fast and slow channel data rates. | 1.3.6.1.4.1.6296.9.3.2.6.1.1.1.10 | Unsigned32 | read-create | current |
| dsVdslLineCfgDownMinDataRate OBJECT-TYPE Specifies the minimum downstream slow channel data rate in steps of 1000 bits/second. The minimum aggregate downstream transmit speed of the line can be derived from the sum of minimum downstream fast and slow channel data rates. | 1.3.6.1.4.1.6296.9.3.2.6.1.1.1.11 | Unsigned32 | read-create | current |
| dsVdslLineCfgUpMaxDataRate OBJECT-TYPE Specifies the maximum upstream slow channel data rate in steps of 1000 bits/second. | 1.3.6.1.4.1.6296.9.3.2.6.1.1.1.12 | Unsigned32 | read-create | current |
| dsVdslLineCfgUpMinDataRate OBJECT-TYPE Specifies the minimum upstream slow channel data rate in steps of 1000 bits/second. | 1.3.6.1.4.1.6296.9.3.2.6.1.1.1.13 | Unsigned32 | read-create | current |
| dsVdslLineCfgDownMaxInterDelay OBJECT-TYPE Specifies the maximum interleave delay for the downstream slow channel. | 1.3.6.1.4.1.6296.9.3.2.6.1.1.1.16 | INTEGER (1..100) | read-create | current |
| dsVdslLineCfgUpMaxInterDelay OBJECT-TYPE Specifies the maximum interleave delay for the upstream slow channel. | 1.3.6.1.4.1.6296.9.3.2.6.1.1.1.17 | INTEGER (1..100) | read-create | current |
| dsVdslLineCfgHamband OBJECT-TYPE dsVdsl Amature Radio(HAM) band ID. The value of Ham band is combination of the following value. If you want to set band1 and band10, you should set value 257(band1 + band10) to the Ham band. band1 [ 1.800 - 1.810 ] MHz : RFI Notch (1) band2 [ 1.800 - 1.825 ] MHz : KOREA HAM-BAND (2) band3 [ 1.810 - 1.825 ] MHz : ANNEX F (4) band4 [ 1.810 - 2.000 ] MHz : ETSI, T1E1 (8) band5 [ 1.9075 - 1.9125 ] MHz : ANNEX F (16) band6 [ 2.173 - 2.191 ] MHz : DT GMDSS (2097152) 0x0000 0020 0000 band7 [ 3.500 - 3.550 ] MHz : KOREA HAM-BAND (32) band8 [ 3.500 - 3.575 ] MHz : ANNEX F (64) band9 [ 3.500 - 3.800 ] MHz : ETSI (128) band10 [ 3.500 - 4.000 ] MHz : T1E1 (256) band11 [ 3.747 - 3.754 ] MHz : ANNEX F (512) band12 [ 3.790 - 3.800 ] MHz : KOREA HAM-BAND (1024) band13 [ 3.791 - 3.805 ] MHz : ANNEX F (2048) band14 [ 4.200 - 4.215 ] MHz : DT GMDSS (4194304) 0x0000 0040 0000 band15 [ 5.900 - 6.200 ] MHz : DT DRM radio (Broadcasting) (8388608) 0x0000 0080 0000 band16 [ 6.300 - 6.320 ] MHz : DT GMDSS (16777216) 0x0000 0100 0000 band17 [ 7.000 - 7.100 ] MHz : KOREA HAM-BAND, ANNEX F, ETSI (4096) band18 [ 7.000 - 7.300 ] MHz : T1E1 (8192) band19 [ 7.100 - 7.350 ] MHz : DT DRM radio (Broadcasting) (33554432) 0x0000 0200 0000 band20 [ 8.405 - 8.420 ] MHz : DT GMDSS (67108864) 0x0000 0400 0000 band21 [ 9.400 - 9.900 ] MHz : DT DRM radio (Broadcasting) (134217728) 0x0000 0800 0000 band22 [ 10.100 - 10.150 ] MHz : KOREA HAM-BAND, ANNEX F, ETSI, T1E1 (16384) band23 [ 11.600 - 12.100 ] MHz : DT DRM radio (Broadcasting) (268435456) 0x0000 1000 0000 band24 [ 12.570 - 12.585 ] MHz : DT GMDSS (536870912) 0x0000 2000 0000 band25 [ 13.570 - 13.870 ] MHz : DT DRM radio (Broadcasting) (1073741824) 0x0000 4000 0000 band26 [ 14.000 - 14.350 ] MHz : ANNEX F, ETSI, T1E1 (32768) band27 [ 15.100 - 15.800 ] MHz : DT DRM radio (Broadcasting) (2147483648) 0x0000 8000 0000 band28 [ 16.795 - 16.810 ] MHz : DT GMDSS (4294967296) 0x0001 0000 0000 band29 [ 17.480 - 17.900 ] MHz : DT DRM radio (Broadcasting) (8589934592) 0x0002 0000 0000 band30 [ 18.068 - 18.168 ] MHz : ANNEX F, ETSI, T1E1 (65536) band31 [ 21.000 - 21.450 ] MHz : ANNEX F, ETSI, T1E1 (131072) 0x0000 0002 0000 band32 [ 24.890 - 24.990 ] MHz : ANNEX F, ETST, T1E1 (262144) 0x0000 0004 0000 band33 [ 28.000 - 29.100 ] MHz : ETSI (524288) 0x0000 0008 0000 band34 [ 28.000 - 29.700 ] MHz : ANNEX F, ETSI, T1E1 (1048576) 0x0000 0010 0000 | 1.3.6.1.4.1.6296.9.3.2.6.1.1.1.20 | Counter64 | read-write | current |
| dsVdslLineCfgDownINP OBJECT-TYPE Vdsl downstream INP . | 1.3.6.1.4.1.6296.9.3.2.6.1.1.1.21 | INTEGER (0..255) | read-write | current |
| dsVdslLineCfgUpINP OBJECT-TYPE Vdsl upstream INP. | 1.3.6.1.4.1.6296.9.3.2.6.1.1.1.22 | INTEGER (0..255) | read-write | current |
| dsVdslLineCfgPBOLength OBJECT-TYPE dsVdsl Power Back-Off Length. 100m(1) 200m(2) 300m(3) 400m(4) 500m(5) 600m(6) 700m(7) 800m(8) 900m(9) 1000m(10) | 1.3.6.1.4.1.6296.9.3.2.6.1.1.1.23 | INTEGER {pbo100m(1), pbo200m(2), pbo300m(3), pbo400m(4), pbo500m(5), pbo600m(6), pbo700m(7), pbo800m(8), pbo900m(9), pbo1000m(10)} | read-only | current |
| dsVdslLineCfgPSDMaskLevel OBJECT-TYPE dsVdsl PSD Mask Level. notavailable(-1) old gains(0) ANSI M1(1) ANSI M2(2) ETSI M1(3) ETSI M2(4) ANNEX F 8.5(5) ANSI M1 EX(6) ANSI M2 EX(7) ETSI M1 EX(8) ETSI M2 EX(9) ANNEX F 11.5(10) PSD-K(11) | 1.3.6.1.4.1.6296.9.3.2.6.1.1.1.24 | INTEGER {notavailable(-1), old-gains(0), aNSI-M1(1), aNSI-M2(2), eTSI-M1(3), eTSI-M2(4), aNNEX-F-8-5(5), aNSI-M1-EX(6), aNSI-M2-EX(7), eTSI-M1-EX(8), eTSI-M2-EX(9), aNNEX-F-11-5(10), pSD-K(11)} | read-only | current |
| dsVdslLineCfgTCMAdmin OBJECT-TYPE . | 1.3.6.1.4.1.6296.9.3.2.6.1.1.1.25 | INTEGER {enable(0), disable(1)} | read-write | current |
| dsVdslLineCfgUpboEnable OBJECT-TYPE . | 1.3.6.1.4.1.6296.9.3.2.6.1.1.1.26 | INTEGER {enable(1), disable(2)} | read-write | current |
| dsVdslLineCfgChannel OBJECT-TYPE . | 1.3.6.1.4.1.6296.9.3.2.6.1.1.1.27 | INTEGER {fast(0), slow(1)} | read-write | current |
| dsVdslLineCfgStandard OBJECT-TYPE VDSL Standard. | 1.3.6.1.4.1.6296.9.3.2.6.1.1.1.28 | INTEGER {vdsl(1), vdsl2(2)} | read-write | current |
| dsVdslLineCfgLineProfile OBJECT-TYPE sym25(1), asym50-3b(2), asym50-4b(3), asym70(4), asym100(5), sym100(6), 8a(8), 8b(9), 8c(10), 8d(11), 12a(12), 12b(13), 17a(14), 30a(15), 12a997(16), 12b997(17), v17a_8k(18) | 1.3.6.1.4.1.6296.9.3.2.6.1.1.1.29 | INTEGER {sym25(1), asym50-3b(2), asym50-4b(3), asym70(4), asym100(5), sym100(6), sym50(7), v8a-998(8), v8b-998(9), v8c-998(10), v8d-998(11), v12a-998(12), v12b-998(13), v17a-998(14), v30a-998(15), v12a-997(16), v12b-997(17), v17a-998-8k(18)} | read-write | current |
| dsVdslLineCfgToneDisableMode OBJECT-TYPE normal(1), isdn(2), adsl(3), adsl2(4), t-lan(5), adsl-safe(6) | 1.3.6.1.4.1.6296.9.3.2.6.1.1.1.30 | INTEGER {normal(1), isdn(2), adsl(3), adsl2(4), t-lan(5), adsl-s(6)} | read-write | current |
| dsVdslLineCfgOptionband OBJECT-TYPE dsVdsl Optional band ID. Annex B 6-64 (1) Annex A 6-32 (2) Annex B 32-64 (3) Exclude Option Band (4) Annex M | 1.3.6.1.4.1.6296.9.3.2.6.1.1.1.31 | INTEGER {notavailable(-1), annex-B-6-64(1), annex-A-6-32(2), annex-B-32-64(3), exclude(4), annex-M(5)} | read-write | current |
| dsVdslLineCfgProfileAction OBJECT-TYPE real set to profile parameter at the time. profile parameter is followings. dsVdslLineCfgStandard, dsVdslLineCfgLineProfile, dsVdslLineCfgToneDisableMode, dsVdslLineCfgOptionband. | 1.3.6.1.4.1.6296.9.3.2.6.1.1.1.33 | INTEGER {set(1)} | read-write | current |
| dsVdslLineCfgProfRowStatus OBJECT-TYPE This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to 'active'. When 'active' is set, the system will validate the profile. Before a profile can be deleted or taken out of service, (by setting this object to 'destroy' or 'outOfService') it must be first unreferenced from all associated lines. | 1.3.6.1.4.1.6296.9.3.2.6.1.1.1.100 | RowStatus | read-create | current |
| dsVdslCpeNosAutoUp OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.2.9 | |||
| dsCpeNosAutoUpInfo OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.2.9.1 | |||
| dsCpeNosAutoUpBase OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.2.9.1.1 | |||
| dsCpeNosAutoUpConfStatus OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.1.1.1 | INTEGER {enable(1), disable(2)} | read-only | current |
| dsCpeNosAutoUpControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.2.9.1.2 | |||
| dsCpeNosAutoUpControlRequest OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.1.2.1 | INTEGER {setConfStatus(1)} | read-write | current |
| dsCpeNosAutoUpControlStatus OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.1.2.2 | SleControlStatusType | read-only | current |
| dsCpeNosAutoUpControlTimer OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.1.2.3 | Gauge32 | read-write | current |
| dsCpeNosAutoUpControlTimeStamp OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.1.2.4 | TimeTicks | read-only | current |
| dsCpeNosAutoUpControlReqResult OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.1.2.5 | SleControlRequestResultType | read-only | current |
| dsCpeNosAutoUpControlConfStatus OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.1.2.6 | INTEGER {enable(1), disable(2)} | read-write | current |
| dsCpeNosAutoUpCtrl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.2.9.2 | |||
| dsCpeNosAutoUpCtrlTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.2.1 | not-accessible | current | |
| dsCpeNosAutoUpCtrlEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.2.1.1 | not-accessible | current | |
| dsCpeNosAutoUpCtrlName OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.2.1.1.1 | OCTET STRING | read-only | current |
| dsCpeNosAutoUpCtrlHW OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.2.1.1.2 | OCTET STRING | read-only | current |
| dsCpeNosAutoUpCtrlOldFW OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.2.1.1.3 | OCTET STRING | read-only | current |
| dsCpeNosAutoUpCtrlNewFW OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.2.1.1.4 | OCTET STRING | read-only | current |
| dsCpeNosAutoUpCtrlFWSize OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.2.1.1.5 | Unsigned32 | read-only | current |
| dsCpeNosAutoUpCtrlControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.2.9.2.2 | |||
| dsCpeNosAutoUpCtrlControlRequest OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.2.2.1 | INTEGER {createControlList(1), deleteControlList(2)} | read-write | current |
| dsCpeNosAutoUpCtrlControlStatus OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.2.2.2 | SleControlStatusType | read-only | current |
| dsCpeNosAutoUpCtrlControlTimer OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.2.2.3 | Gauge32 | read-write | current |
| dsCpeNosAutoUpCtrlControlTimeStamp OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.2.2.4 | TimeTicks | read-only | current |
| dsCpeNosAutoUpCtrlControlReqResult OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.2.2.5 | SleControlRequestResultType | read-only | current |
| dsCpeNosAutoUpCtrlControlName OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.2.2.6 | OCTET STRING | read-write | current |
| dsCpeNosAutoUpCtrlControlHW OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.2.2.7 | OCTET STRING | read-write | current |
| dsCpeNosAutoUpCtrlControlOldFW OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.2.2.8 | OCTET STRING | read-write | current |
| dsCpeNosAutoUpCtrlControlNewFW OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.2.2.9 | OCTET STRING | read-write | current |
| dsCpeNosAutoUpCtrlControlFWSize OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.2.2.10 | Unsigned32 | read-write | current |
| dsCpeNosAutoUpSched OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.2.9.3 | |||
| dsCpeNosAutoUpSchedTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.3.1 | not-accessible | current | |
| dsCpeNosAutoUpSchedEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.3.1.1 | not-accessible | current | |
| dsCpeNosAutoUpSchedName OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.3.1.1.1 | OCTET STRING | read-only | current |
| dsCpeNosAutoUpSchedType OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.3.1.1.2 | INTEGER {afterNsec(1), period(2), daily(3), at(4)} | read-only | current |
| dsCpeNosAutoUpSchedSec OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.3.1.1.3 | Integer32 | read-only | current |
| dsCpeNosAutoUpSchedInterval OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.3.1.1.4 | Integer32 | read-only | current |
| dsCpeNosAutoUpSchedYear OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.3.1.1.5 | Integer32 | read-only | current |
| dsCpeNosAutoUpSchedMonth OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.3.1.1.6 | Integer32 | read-only | current |
| dsCpeNosAutoUpSchedDay OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.3.1.1.7 | Integer32 | read-only | current |
| dsCpeNosAutoUpSchedHour OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.3.1.1.8 | Integer32 | read-only | current |
| dsCpeNosAutoUpSchedMinute OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.3.1.1.9 | Integer32 | read-only | current |
| dsCpeNosAutoUpSchedPortMap OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.3.1.1.10 | OCTET STRING | read-only | current |
| dsCpeNosAutoUpSchedCtrlMap OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.3.1.1.11 | OCTET STRING | read-only | current |
| dsCpeNosAutoUpSchedControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.2.9.3.2 | |||
| dsCpeNosAutoUpSchedControlRequest OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.3.2.1 | INTEGER {createScheduleList(1), deleteScheduleList(2)} | read-write | current |
| dsCpeNosAutoUpSchedControlStatus OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.3.2.2 | SleControlStatusType | read-only | current |
| dsCpeNosAutoUpSchedControlTimer OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.3.2.3 | Gauge32 | read-write | current |
| dsCpeNosAutoUpSchedControlTimeStamp OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.3.2.4 | TimeTicks | read-only | current |
| dsCpeNosAutoUpSchedControlReqResult OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.3.2.5 | SleControlRequestResultType | read-only | current |
| dsCpeNosAutoUpSchedControlName OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.3.2.6 | OCTET STRING | read-write | current |
| dsCpeNosAutoUpSchedControlType OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.3.2.7 | INTEGER {afterNsec(1), period(2), daily(3), at(4)} | read-write | current |
| dsCpeNosAutoUpSchedControlSec OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.3.2.8 | Integer32 | read-write | current |
| dsCpeNosAutoUpSchedControlInterval OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.3.2.9 | Integer32 | read-write | current |
| dsCpeNosAutoUpSchedControlYear OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.3.2.10 | Integer32 | read-write | current |
| dsCpeNosAutoUpSchedControlMonth OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.3.2.11 | Integer32 | read-write | current |
| dsCpeNosAutoupSchedControlDay OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.3.2.12 | Integer32 | read-write | current |
| dsCpeNosAutoUpSchedControlHour OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.3.2.13 | Integer32 | read-write | current |
| dsCpeNosAutoUpSchedControlMinute OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.3.2.14 | Integer32 | read-write | current |
| dsCpeNosAutoUpSchedControlPortMap OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.3.2.15 | OCTET STRING | read-write | current |
| dsCpeNosAutoUpSchedControlCtrlMap OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.3.2.16 | OCTET STRING | read-write | current |
| dsCpeNosAutoUpPort OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.2.9.4 | |||
| dsCpeNosAutoUpPortTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.4.1 | not-accessible | current | |
| dsCpeNosAutoUpPortEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.4.1.1 | not-accessible | current | |
| dsCpeNosAutoUpPortPortNum OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.4.1.1.1 | Integer32 | read-only | current |
| dsCpeNosAutoUpPortRetry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.4.1.1.2 | Integer32 | read-only | current |
| dsCpeNosAutoUpPortTimeout OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.4.1.1.3 | Integer32 | read-only | current |
| dsCpeNosAutoUpPortSchedMap OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.4.1.1.4 | OCTET STRING | read-only | current |
| dsCpeNosAutoUpPortCurrState OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.4.1.1.5 | Integer32 | read-only | current |
| dsCpeNosAutoUpPortCurrSched OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.4.1.1.6 | Integer32 | read-only | current |
| dsCpeNosAutoUpPortCurrCtrl OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.4.1.1.7 | Integer32 | read-only | current |
| dsCpeNosAutoUpPortControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.2.9.4.2 | |||
| dsCpeNosAutoUpPortControlRequest OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.4.2.1 | INTEGER {setSchedule(1)} | read-write | current |
| dsCpeNosAutoUpPortControlStatus OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.4.2.2 | SleControlStatusType | read-only | current |
| dsCpeNosAutoUpPortControlTimer OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.4.2.3 | Gauge32 | read-write | current |
| dsCpeNosAutoUpPortControlTimeStamp OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.4.2.4 | TimeTicks | read-only | current |
| dsCpeNosAutoUpPortControlReqResult OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.4.2.5 | SleControlRequestResultType | read-only | current |
| dsCpeNosAutoUpPortControlPortNum OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.4.2.6 | Integer32 | read-write | current |
| dsCpeNosAutoUpPortControlRetry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.4.2.7 | Integer32 | read-write | current |
| dsCpeNosAutoUpPortControlTimeout OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.4.2.8 | Integer32 | read-write | current |
| dsCpeNosAutoUpNos OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.2.9.5 | |||
| dsCpeNosAutoUpNosTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.5.1 | not-accessible | current | |
| dsCpeNosAutoUpNosEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.5.1.1 | not-accessible | current | |
| dsCpeNosAutoUpNosName OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.5.1.1.1 | OCTET STRING | read-only | current |
| dsCpeNosAutoUpNosSize OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.5.1.1.2 | Integer32 | read-only | current |
| dsCpeNosAutoUpNosControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.2.9.5.2 | |||
| dsCpeNosAutoUpNosControlRequest OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.5.2.1 | INTEGER {ftpGet(1), tftpGet(2), delete(3)} | read-write | current |
| dsCpeNosAutoUpNosControlStatus OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.5.2.2 | SleControlStatusType | read-only | current |
| dsCpeNosAutoUpNosControlTimer OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.5.2.3 | Gauge32 | read-write | current |
| dsCpeNosAutoUpNosControlTimeStamp OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.5.2.4 | TimeTicks | read-only | current |
| dsCpeNosAutoUpNosControlReqResult OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.5.2.5 | SleControlRequestResultType | read-only | current |
| dsCpeNosAutoUpNosControlServerIP OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.5.2.6 | IpAddress | read-write | current |
| dsCpeNosAutoUpNosControlUserID OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.5.2.7 | OCTET STRING | read-write | current |
| dsCpeNosAutoUpNosControlPasswd OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.5.2.8 | OCTET STRING | read-write | current |
| dsCpeNosAutoUpNosControlSrcName OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.5.2.9 | OCTET STRING | read-write | current |
| dsCpeNosAutoUpNosControlDestName OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.5.2.10 | OCTET STRING | read-write | current |
| dsCpeNosAutoUpResultLog OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.2.9.6 | |||
| dsCpeNosAutoUpRLogTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.6.1 | not-accessible | current | |
| dsCpeNosAutoUpRLogEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.6.1.1 | not-accessible | current | |
| dsCpeNosAutoUpRLogName OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.6.1.1.1 | OCTET STRING | read-only | current |
| dsCpeNosAutoUpRLogValue OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.6.1.1.2 | OCTET STRING | read-only | current |
| dsCpeNosAutoUpRLogControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.2.9.6.2 | |||
| dsCpeNosAutoUpRLogControlRequest OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.6.2.1 | INTEGER {ftp-put(1), tftp-put(2), delete(3)} | read-write | current |
| dsCpeNosAutoUpRLogControlStatus OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.6.2.2 | SleControlStatusType | read-only | current |
| dsCpeNosAutoUpRLogControlTimer OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.6.2.3 | Gauge32 | read-write | current |
| dsCpeNosAutoUpRLogControlTimeStamp OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.6.2.4 | TimeTicks | read-only | current |
| dsCpeNosAutoUpRLogControlReqResult OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.6.2.5 | SleControlRequestResultType | read-only | current |
| dsCpeNosAutoUpRLogControlServerIP OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.6.2.6 | IpAddress | read-write | current |
| dsCpeNosAutoUpRLogControlUserID OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.6.2.7 | OCTET STRING | read-write | current |
| dsCpeNosAutoUpRLogControlPasswd OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.6.2.8 | OCTET STRING | read-write | current |
| dsCpeNosAutoUpRLogControlSrcName OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.6.2.9 | OCTET STRING | read-write | current |
| dsCpeNosAutoUpRLogControlDestName OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.6.2.10 | OCTET STRING | read-write | current |
| dsCpeNosAutoUpSchedCount OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.2.9.7 | |||
| dsCpeNosAutoUpSchedCountTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.7.1 | not-accessible | current | |
| dsCpeNosAutoUpSchedCountEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.7.1.1 | not-accessible | current | |
| dsCpeNosAutoUpSchedCountPort OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.7.1.1.1 | Integer32 | read-only | current |
| dsCpeNosAutoUpSchedCountSched OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.7.1.1.2 | Integer32 | read-only | current |
| dsCpeNosAutoUpSchedCountFail OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.7.1.1.3 | Integer32 | read-only | current |
| dsCpeNosAutoUpSchedCountTotal OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.7.1.1.4 | Integer32 | read-only | current |
| dsCpeNosAutoUpSchedCountControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.9.3.2.9.7.2 | |||
| dsCpeNosAutoUpSchedCountControlRequest OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.7.2.1 | INTEGER {clearStat(1)} | read-write | current |
| dsCpeNosAutoUpSchedCountControlStatus OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.7.2.2 | Integer32 | read-only | current |
| dsCpeNosAutoUpSchedCountControlTimer OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.7.2.3 | Gauge32 | read-write | current |
| dsCpeNosAutoUpSchedCountControlTimeStamp OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.7.2.4 | TimeTicks | read-only | current |
| dsCpeNosAutoUpSchedCountControlReqResult OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.7.2.5 | Integer32 | read-write | current |
| dsCpeNosAutoUpSchedCountControlPort OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.9.3.2.9.7.2.6 | Integer32 | read-write | current |
Conformance
| Name | OID | Status |
|---|---|---|
| dsVdslObjectGroup OBJECT-GROUP Description. | 1.3.6.1.4.1.6296.9.3.2.20 | current |