MIBs Depot

DASAN-ADSL-MIB

Registered at
1.3.6.1.4.1.6296.9.5
Last updated
2004-07-15 00:00
Organization
Dasan Co., Ltd.
Namespace
dasan
Source file
DASAN-ADSL-MIB
Digest
sha256:88487994d15f8d71c05086174102488855f1b307e84b66cc8f75885799c1eed9

Description

The MIB module to describe ADSL product. The MIB module that provides objects that are proprietary and extension to ADSL- LINE-MIB. The MIB include extension to following Tables. 1.) adslLineTable 2.) adslAtucPhysTable 3.) adslAturPhysTable 4.) adslAtucChanTable 5.) adslAturChanTable 6.) adslAtucPerfDataTable --7.) adslAturPerfDataTable 8.) adslAtucIntervalTable --9.) adslAturIntervalTable 10.) adslAtucChanPerfDataTable 11.) adslAturChanPerfDataTable 12.) adslAtucChanIntervalTable 13.) adslAturChanIntervalTable 14.) adslLineConfProfileTable 15.) adslLineAlarmConfProfileTable The MIB also include a set of scalar(s) clubbed under the group 'dsAdslCapabilityGroup'.

Contact

Dasan Co., Ltd.

Imports

FromSymbols
ADSL-LINE-MIBadslAtucChanIntervalNumber, adslAtucIntervalNumber, adslAturChanIntervalNumber, adslLineAlarmConfProfileName, adslLineConfProfileName
DASAN-SMIdasanMgmt
IF-MIBifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso, mib-2
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ADSL-LINE-MIB
ADSL-TC-MIB
DASAN-ADSL-MIB
DASAN-SMI
IANAifType-MIB
IF-MIB
PerfHist-TC-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
dasanAdslLineMIB
OBJECT-IDENTITY
1.3.6.1.4.1.6296.9.5.1
dasanAdslMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.6296.9.5.1.1
dsDslSystemParamGroup
OBJECT-IDENTITY
1.3.6.1.4.1.6296.9.5.1.1.1
dsDslSystemDslType
OBJECT-TYPE
This object identifies the firmware to be downloaded.
1.3.6.1.4.1.6296.9.5.1.1.1.1INTEGER {adsl(1), sdsl(2), shdsl(3)}read-writecurrent
dsDslSystemLineCodingType
OBJECT-TYPE
This object indicates ADSL line code type.
1.3.6.1.4.1.6296.9.5.1.1.1.2INTEGER {other(1), dmt(2), cap(3), qam(4)}read-writecurrent
dsDslSystemLineTxCfg
OBJECT-TYPE
This object indicates transmission capabilities with which the DSL system is configured.
1.3.6.1.4.1.6296.9.5.1.1.1.3Bits {ansit1413(0), etsi(1), q9921PotsNonOverlapped(2), q9921PotsOverlapped(3), q9921IsdnNonOverlapped(4), q9921IsdnOverlapped(5), q9921TcmIsdnNonOverlapped(6), q9921TcmIsdnOverlapped(7), q9922PotsNonOverlapped(8), q9922PotsOverlapped(9), q9922TcmIsdnNonOverlapped(10), q9922TcmIsdnOverlapped(11), q9921TcmIsdnSymmetric(12)}read-writecurrent
dsAdslCapabilityGroup
OBJECT-IDENTITY
1.3.6.1.4.1.6296.9.5.1.1.2
dsAdslCapabilityLineTxCap
OBJECT-TYPE
This bitmap specifies which all transmission modes, which the ATU-C is capable of supporting. Right now support for Annex A (q9921PotsNonOverlapped(2) and q9921PotsOverlapped(3)) is present. This value depends on the DSL PHY firmware present on Columbia MND
1.3.6.1.4.1.6296.9.5.1.1.2.1Bits {ansit1413(0), etsi(1), q9921PotsNonOverlapped(2), q9921PotsOverlapped(3), q9921IsdnNonOverlapped(4), q9921IsdnOverlapped(5), q9921TcmIsdnNonOverlapped(6), q9921TcmIsdnOverlapped(7), q9922PotsNonOverlapped(8), q9922PotsOverlapped(9), q9922TcmIsdnNonOverlapped(10), q9922TcmIsdnOverlapped(11), q9921TcmIsdnSymmetric(12), adslPlusPotsNonOverlapped(13), adslPlusPotsOverlapped(18), q9923Readsl2PotsOverlapped(22), q9923Readsl2PotsNonOverlapped(23), q9925Adsl2PlusPotsNonOverlapped(26), q9925Adsl2PlusPotsOverlapped(27), q9923Adsl2PotsNonOverlapped(28), q9923Adsl2PotsOverlapped(29), q9921GspanPlusPotsOverlapped(30), q9921GspanPlusPotsNonOverlapped(31)}read-onlycurrent
dsAdslLineExtnTable
OBJECT-TYPE
This table includes common attributes describing both ends of the line. It is required for all ADSL physical interfaces. This Table is an extension to adslLineTable defined in rfc-2662.
1.3.6.1.4.1.6296.9.5.1.1.3not-accessiblecurrent
dsAdslLineExtnEntry
OBJECT-TYPE
An entry (conceptual row) in the dsAdslLineExtnTable. The Table is indexed by ifIndex.
1.3.6.1.4.1.6296.9.5.1.1.3.1not-accessiblecurrent
dsAdslLineExtnAction
OBJECT-TYPE
this object indicates parameter that allows actions on a per line basis. These actions include abort, startup, and tests.
1.3.6.1.4.1.6296.9.5.1.1.3.1.1INTEGER {startup(0), spectrumReverb(5), analogLb(6), digitalLb(7), atmLp(10), spectrumMedley(26), spectrumPilot(27), spectrumCMtpr(30), spectrumRMtpr(32), hybridLossTest(33), rcvLinearityTest(34), rcvFilterTest(35), rcvPowerPerBinTest(36), idleNoisePerBinTest(37), totalIdleNoiseTest(38), shutdown(101), wakeup(102), selt(4134)}read-writecurrent
dsAdslLineExtnUtopiaL2RxAddr
OBJECT-TYPE
This object indicates UTOPIA Level 2 Rx address for a line.
1.3.6.1.4.1.6296.9.5.1.1.3.1.2INTEGER (1..254)read-onlycurrent
dsAdslLineExtnUtopiaL2TxAddr
OBJECT-TYPE
This object indicates UTOPIA Level 2 Tx address for a line.
1.3.6.1.4.1.6296.9.5.1.1.3.1.3INTEGER (1..254)read-onlycurrent
dsAdslLineExtnTransAtucCap
OBJECT-TYPE
The transmission modes that the ATU-C is capable of supporting. The modes available are limited by the design of the equipment. REFERENCE Section 7.3.2 ITU G.997.1.
1.3.6.1.4.1.6296.9.5.1.1.3.1.4Bits {ansit1413(0), etsi(1), q9921PotsNonOverlapped(2), q9921PotsOverlapped(3), q9921IsdnNonOverlapped(4), q9921isdnOverlapped(5), q9921tcmIsdnNonOverlapped(6), q9921tcmIsdnOverlapped(7), q9922potsNonOverlapeed(8), q9922potsOverlapped(9), q9922tcmIsdnNonOverlapped(10), q9922tcmIsdnOverlapped(11), q9921tcmIsdnSymmetric(12), adslPlusPotsNonOverlapped(13), adslPlusPotsOverlapped(18), q9923Readsl2PotsOverlapped(22), q9923Readsl2PotsNonOverlapped(23), vdslOverlapped(24), vdslNonOverlapped(25), q9925Adsl2PlusPotsNonOverlapped(26), q9925Adsl2PlusPotsOverlapped(27), q9923Adsl2PotsNonOverlapped(28), q9923Adsl2PotsOverlapped(29), q9921GspanPlusPotsOverlapped(30), q9921GspanPlusPotsNonOverlapped(31)}read-onlycurrent
dsAdslLineExtnTransAtucActual
OBJECT-TYPE
The transmission mode of the ATU-C. This object returns if there is no mode currently known. The initialization with the ATU-R will determine the mode used. REFERENCE Section 7.3.2 ITU G.997.1.
1.3.6.1.4.1.6296.9.5.1.1.3.1.5Bits {ansit1413(0), etsi(1), q9921PotsNonOverlapped(2), q9921PotsOverlapped(3), q9921IsdnNonOverlapped(4), q9921isdnOverlapped(5), q9921tcmIsdnNonOverlapped(6), q9921tcmIsdnOverlapped(7), q9922potsNonOverlapeed(8), q9922potsOverlapped(9), q9922tcmIsdnNonOverlapped(10), q9922tcmIsdnOverlapped(11), q9921tcmIsdnSymmetric(12), adslPlusPotsNonOverlapped(13)}read-onlycurrent
dsAdslLineExtnClockType
OBJECT-TYPE
This object indicates parameter to set use of either crystal or oscillator.
1.3.6.1.4.1.6296.9.5.1.1.3.1.6INTEGER {oscillator(0), crystal(4)}read-onlycurrent
dsAdslLineExtnLineDmtTrellis
OBJECT-TYPE
Parameter that indicates whether trellis coding has been enabled or disabled. Trellis coding should always be enabled for its clear performance advantage.
1.3.6.1.4.1.6296.9.5.1.1.3.1.7INTEGER {trellisOn(1), trellisOff(2)}read-onlycurrent
dsAdslAtucPhysExtnTable
OBJECT-TYPE
This table provides one row for each ATUC. This table is an extention to adslAtucPhysTable defined in rfc-2662.
1.3.6.1.4.1.6296.9.5.1.1.4not-accessiblecurrent
dsAdslAtucPhysExtnEntry
OBJECT-TYPE
An entry (conceptual row) in the dsAdslAtucPhysExtnTable. The Table is indexed by ifIndex.
1.3.6.1.4.1.6296.9.5.1.1.4.1not-accessiblecurrent
dsAdslAtucPhysExtnOpState
OBJECT-TYPE
This object indicates the operational state of the ATU. Values include idle,handshake, training, etc.
1.3.6.1.4.1.6296.9.5.1.1.4.1.1INTEGER {idle(0), data(1), bootupLoad(8), handshake(16), training(24), framerSync(26), fastRetrainInProg(27), discovery(46), llTest(128), dlTest(131), txTest(132), atmLpTest(133), deltTraining(139), delt(140)}read-onlycurrent
dsAdslAtucPhysExtnActualStd
OBJECT-TYPE
This object provides actual ATU-C configuration based on outcome of negotiation with ATU-R. In this case, the parameter provides actual standard used for the connection.
1.3.6.1.4.1.6296.9.5.1.1.4.1.2INTEGER {t1413(0), gLite(1), gDmt(2), alctl14(3), multimode(4), adi(5), alctl(6), t1413auto(9), adsl2(26), adsl2Plus(27), reAdsl2(28), adsl2Auto(29), adsl2PlusAuto(30), adslPlus(48), gspanPlus(64)}read-onlycurrent
dsAdslAtucPhysExtnBertError
OBJECT-TYPE
This object indicates the No. of bit errors detected during BERT.
1.3.6.1.4.1.6296.9.5.1.1.4.1.3INTEGERread-onlycurrent
dsAdslAtucPhysExtnTxAtmCellCounter
OBJECT-TYPE
This object Provides transmit ATM cell counter.
1.3.6.1.4.1.6296.9.5.1.1.4.1.4Counter32read-onlycurrent
dsAdslAtucPhysExtnRxAtmCellCounter
OBJECT-TYPE
This object Provides receive ATM cell counter.
1.3.6.1.4.1.6296.9.5.1.1.4.1.5INTEGERread-onlycurrent
dsAdslAtucPhysExtnStartProgress
OBJECT-TYPE
This object provides current detailed start up information to be used for debugging.
1.3.6.1.4.1.6296.9.5.1.1.4.1.6INTEGERread-onlycurrent
dsAdslAtucPhysExtnIdleBertError
OBJECT-TYPE
Number of bit errors.
1.3.6.1.4.1.6296.9.5.1.1.4.1.7INTEGERread-onlycurrent
dsAdslAtucPhysExtnIdleBertCells
OBJECT-TYPE
Number of idle cells.
1.3.6.1.4.1.6296.9.5.1.1.4.1.8INTEGERread-onlycurrent
dsAdslAtucPhysExtnBertSync
OBJECT-TYPE
Indicates if the Signal is in Sync or not.
1.3.6.1.4.1.6296.9.5.1.1.4.1.9INTEGER {bertOutOfSync(0), bertInSync(128)}read-onlycurrent
dsAdslAtucPhysExtnParametricTestResult
OBJECT-TYPE
Indicates the Result of the Parametric Test conducted on the Xcvr.
1.3.6.1.4.1.6296.9.5.1.1.4.1.10INTEGER {ok(0), fail(1), dspIfFail(2)}read-onlycurrent
dsAdslAtucPhysExtnDataBoostStatus
OBJECT-TYPE
This object indicates whether DataBoost is utilized for the connection.
1.3.6.1.4.1.6296.9.5.1.1.4.1.21INTEGER {disabled(0), enabled(32768)}read-onlycurrent
dsAdslAtucPhysExtnTestArray
OBJECT-TYPE
This object indicates the Parametric Test Array. Every Four octects refer to one element in this array of octets.
1.3.6.1.4.1.6296.9.5.1.1.4.1.22OCTET STRING (SIZE(0..42))read-onlycurrent
dsAdslAtucPhysExtnChanPerfCD
OBJECT-TYPE
The near-end delineated total cell count performance parameter is a count of the total number of cells passed through the cell delineation and HEC function process operating on the ATM Data Path while in the SYNC state. (Not available for ADSL).
1.3.6.1.4.1.6296.9.5.1.1.4.1.23INTEGERread-onlycurrent
dsAdslAtucPhysExtnChanPerfBE
OBJECT-TYPE
The near-end idle bit error count performance parameter is a count of the number of bit errors in the idle cell payload received in the ATM Data Path at the near-end. (Not available for ADSL).
1.3.6.1.4.1.6296.9.5.1.1.4.1.24INTEGERread-onlycurrent
dsAdslAtucPhysExtnDeltHLINSCus
OBJECT-TYPE
DELT-related parameter that provides the scale factor to be applied to the upstream Hlin(f) values.(Not available for ADSL and ADSL2plus).
1.3.6.1.4.1.6296.9.5.1.1.4.1.25INTEGERread-onlycurrent
dsAdslAtucPhysExtnDeltHLINpsus
OBJECT-TYPE
DELT-related parameter that provides an array of complex upstream Hlin(f) values in linear scale. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of octets.
1.3.6.1.4.1.6296.9.5.1.1.4.1.26OCTET STRING (SIZE(0..42))read-onlycurrent
dsAdslAtucPhysExtnDeltHLOGMTus
OBJECT-TYPE
DELT-related parameter that provides the number of symbols used to measure the upstream Hlog(f).(Not available for ADSL and ADSL2plus).
1.3.6.1.4.1.6296.9.5.1.1.4.1.27INTEGERread-onlycurrent
dsAdslAtucPhysExtnDeltHLOGpsus
OBJECT-TYPE
DELT-related parameter that provides an array of real upstream Hlog(f) values in dB. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of octets.
1.3.6.1.4.1.6296.9.5.1.1.4.1.28OCTET STRING (SIZE(0..42))read-onlycurrent
dsAdslAtucPhysExtnDeltQLNMTus
OBJECT-TYPE
DELT-related parameter that provides the number of symbols used to measure the upstream QLN(f) values. (Not available for ADSL and ADSL2plus).
1.3.6.1.4.1.6296.9.5.1.1.4.1.29INTEGERread-onlycurrent
dsAdslAtucPhysExtnDeltQLNpsus
OBJECT-TYPE
DELT-related parameter that provides an array of real upstream QLN(f) values in dB. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of octets.
1.3.6.1.4.1.6296.9.5.1.1.4.1.30OCTET STRING (SIZE(0..42))read-onlycurrent
dsAdslAtucPhysExtnDeltLastTxState
OBJECT-TYPE
DELT-related parameter that provides last successful transmitted initialization state by the ATU-C. (Not available for ADSL and ADSL2plus).
1.3.6.1.4.1.6296.9.5.1.1.4.1.31INTEGER {dmtatucg9941(0), dmtatucquiet1(1), dmtatuccomb1(2), dmtatucquiet2(3), dmtatuccomb2(4), dmtatucicomb1(5), dmtatuclineprob(6), dmtatucquiet3(7), dmtatuccomb3(8), dmtatucicomb2(9), dmtatucmsgfmt(10), dmtatucmsgpcb(11), dmtatucquiet4(12), dmtatucreverb1(13), dmtatuctref1(14), dmtatucreverb2(15), dmtatucect(16), dmtatucreverb3(17), dmtatuctref2(18), dmtatucreverb4(19), dmtatucsegue1(20), dmtatucmsg1(21), dmtatucreverb5(22), dmtatucsegue2(23), dmtatucmedley(24), dmtatucexchmarker(25), dmtatucmsg2(26), dmtatucreverb6(27), dmtatucsegue3(28), dmtatucparams(29), dmtatucreverb7(30), dmtatucsegue4(31), dmtatucshowtime(32)}read-onlycurrent
dsAdslAtucPhysExtnPMState
OBJECT-TYPE
Line Power Management State. (Not available for ADSL).
1.3.6.1.4.1.6296.9.5.1.1.4.1.32INTEGER {idleop(0), dataop(1), l2op(141)}read-onlycurrent
dsAdslAtucPhysExtnChanPerfCU
OBJECT-TYPE
The near-end user total cell count performance parameter is a count of the total number of cells in the ATM Data Path delivered at the V-C (for ATU-C) or T-R (for ATU-R) interface. (Not available for ADSL).
1.3.6.1.4.1.6296.9.5.1.1.4.1.33INTEGERread-onlycurrent
dsAdslAtucPhysExtnExtendedPsdStatus
OBJECT-TYPE
GlobespanVirata parameter that indicates whether an extended or the standard upstream PSD is used - for G.Span Plus mode of operation only. Only supported for G.Span Plus, therefore this parameter is not valid for ADSL2/ADSL2plus modes of operation.
1.3.6.1.4.1.6296.9.5.1.1.4.1.34INTEGER {standard(0), jj100(1), extended(32768)}read-onlycurrent
dsAdslAtucPhysExtnChipVersion
OBJECT-TYPE
GlobespanVirata parameter that indicates the DSP version number.
1.3.6.1.4.1.6296.9.5.1.1.4.1.35INTEGERread-onlycurrent
dsAdslAtucPhysExtnPilotTone
OBJECT-TYPE
GlobespanVirata parameter that indicates the Pilot Tone Index.
1.3.6.1.4.1.6296.9.5.1.1.4.1.36INTEGERread-onlycurrent
dsAdslAtucMSGds
OBJECT-TYPE
Indicates the Overhead Channel. This feature is not supported by DSLPHY as yet.
1.3.6.1.4.1.6296.9.5.1.1.4.1.37Gauge32read-onlycurrent
dsAdslAtucPhysExtnPsdMaskMode
OBJECT-TYPE
GlobespanVirata parameter that indicates the actual Psd Mask currently being used.
1.3.6.1.4.1.6296.9.5.1.1.4.1.38INTEGER {adsl(0), hsadslM1(3), hsadslM2(4), msk2Rfi(32768), flatMskRfi(32771), cabMsk2Rfi(32772), coMsk2Rfi0(49152)}read-onlycurrent
dsAdslAturPhysExtnTable
OBJECT-TYPE
This table is an extention to adslAtucPhysTable defined in rfc-2662. This table provides one row for each ATUR. Each row contains the Physical Layer Parameters table for that ATUR.
1.3.6.1.4.1.6296.9.5.1.1.5not-accessiblecurrent
dsAdslAturPhysExtnEntry
OBJECT-TYPE
An entry (conceptual row) in the dsAdslAturPhysExtnTable. The Table is indexed by IfIndex.
1.3.6.1.4.1.6296.9.5.1.1.5.1not-accessiblecurrent
dsAdslAturPhysExtnConfig
OBJECT-TYPE
This object provides the upstream and downstream ATU-R configuration data (EOC - read 5 sec after data mode).
1.3.6.1.4.1.6296.9.5.1.1.5.1.1OCTET STRING (SIZE(0..255))read-onlycurrent
dsAdslAturPhysExtnChanPerfCD
OBJECT-TYPE
The far-end delineated total cell count performance parameter is a count of the total number of cells passed through the cell delineation and HEC function process operating on the ATM Data Path while in the SYNC state.(Not available for ADSL).
1.3.6.1.4.1.6296.9.5.1.1.5.1.2INTEGERread-onlycurrent
dsAdslAturPhysExtnChanPerfCU
OBJECT-TYPE
The far-end user total cell count performance parameter is a count of the total number of cells in the ATM Data Path delivered at the V-C (for ATU-C) or T-R (for ATUR) interface. (Not available for ADSL).
1.3.6.1.4.1.6296.9.5.1.1.5.1.3INTEGERread-onlycurrent
dsAdslAturPhysExtnChanPerfBE
OBJECT-TYPE
The far-end idle bit error count performance parameter is a count of the number of bit errors in the idle cell payload received in the ATM Data Path at the far-end. (Not available for ADSL).
1.3.6.1.4.1.6296.9.5.1.1.5.1.4INTEGERread-onlycurrent
dsAdslAturPhysExtnDeltHLINSCds
OBJECT-TYPE
DELT-related parameter that provides the scale factor to be applied to the downstream Hlin(f) values.(Not available for ADSL and ADSL2plus).
1.3.6.1.4.1.6296.9.5.1.1.5.1.5INTEGERread-onlycurrent
dsAdslAturPhysExtnDeltHLINpsds
OBJECT-TYPE
DELT-related parameter that provides an array of complex downstream Hlin(f) values in linear scale. (Not available for ADSL and ADSL2plus). Every two octects refer to one element in this array of octets.
1.3.6.1.4.1.6296.9.5.1.1.5.1.6OCTET STRING (SIZE(0..42))read-onlycurrent
dsAdslAturPhysExtnDeltHLOGMTds
OBJECT-TYPE
DELT-related parameter that provides the number of symbols used to measure the downstream Hlog(f). (Not available for ADSL and ADSL2plus).
1.3.6.1.4.1.6296.9.5.1.1.5.1.7INTEGERread-onlycurrent
dsAdslAturPhysExtnDeltHLOGpsus
OBJECT-TYPE
DELT-related parameter that provides an array of real downstream Hlog(f) values in dB. (Not available for ADSL and ADSL2plus).
1.3.6.1.4.1.6296.9.5.1.1.5.1.8OCTET STRING (SIZE(0..42))read-onlycurrent
dsAdslAturPhysExtnDeltQLNMTds
OBJECT-TYPE
DELT-related parameter that provides the number of symbols used to measure the downstream QLN(f) values. (Not available for ADSL and ADSL2plus).
1.3.6.1.4.1.6296.9.5.1.1.5.1.9INTEGERread-onlycurrent
dsAdslAturPhysExtnDeltQLNpsds
OBJECT-TYPE
DELT-related parameter that provides an array of real downstream QLN(f) values in dB. (Not available for ADSL and ADSL2plus). Every two octects refer to one element in this array of octets.
1.3.6.1.4.1.6296.9.5.1.1.5.1.10OCTET STRING (SIZE(0..42))read-onlycurrent
dsAdslAturPhysExtnDeltLastTxState
OBJECT-TYPE
DELT-related parameter that provides last successful transmitted initialization state by the ATU-R. (Not available for ADSL and ADSL2plus).
1.3.6.1.4.1.6296.9.5.1.1.5.1.11INTEGER {dmtaturg9941(0), dmtaturquiet1(1), dmtaturcomb1(2), dmtaturquiet2(3), dmtaturcomb2(4), dmtaturicomb1(5), dmtaturlineprob(6), dmtaturquiet3(7), dmtaturcomb3(8), dmtaturicomb2(9), dmtaturmsgfmt(10), dmtaturmsgpcb(11), dmtaturreverb1(12), dmtaturquiet4(13), dmtaturreverb2(14), dmtaturquiet5(15), dmtaturreverb3(16), dmtaturect(17), dmtaturreverb4(18), dmtatursegue1(19), dmtaturreverb5(20), dmtatursegue2(21), dmtaturmsg1(22), dmtaturmedley(23), dmtaturexchmarker(24), dmtaturmsg2(25), dmtaturreverb6(26), dmtatursegue3(27), dmtaturparams(28), dmtaturreverb7(29), dmtatursegue4(30), dmtaturshowtime(31)}read-onlycurrent
dsAdslAturMSGus
OBJECT-TYPE
Indicates the Overhead Channel. This feature is not supported by DSLPHY as yet.
1.3.6.1.4.1.6296.9.5.1.1.5.1.12Gauge32read-onlycurrent
dsAdslAtucChanExtnTable
OBJECT-TYPE
This table provides one row for each ATUC channel. This Table is an extention to adslAtucChanTable defined in rfc 2662.
1.3.6.1.4.1.6296.9.5.1.1.6not-accessiblecurrent
dsAdslAtucChanExtnEntry
OBJECT-TYPE
An entry (conceptual row) in the dsAdslAtucChanExtnTable. The Table is indexed by ifIndex.
1.3.6.1.4.1.6296.9.5.1.1.6.1not-accessiblecurrent
dsAdslAtucChanExtnCurrAtmStatus
OBJECT-TYPE
indicates an ncd or lcd failure if the counter surpasses 127. If neither ATM counter surpasses 127, the return value will be 'NoAtmDefect'.
1.3.6.1.4.1.6296.9.5.1.1.6.1.1INTEGER {noAtmDefect(0), noCellDelineation(1), lossOfCellDelineation(2)}read-onlycurrent
dsAdslAtucChanExtnRsSymbols
OBJECT-TYPE
Indicates number of DMT symbols per Reed-Solomon code word (S) in the downstream direction. Note that S is not restricted to interleaved mode only. Even in fast mode, S is a valid constant value and is equal to 1.
1.3.6.1.4.1.6296.9.5.1.1.6.1.2INTEGERread-onlycurrent
dsAdslAtucChanExtnRsDepth
OBJECT-TYPE
Indicates interleaving depth (D) in the downstream direction. Note that D is not restricted to interleaved mode only. Even in fast mode, D is a valid constant value and is equal to 1.
1.3.6.1.4.1.6296.9.5.1.1.6.1.3INTEGERread-onlycurrent
dsAdslAtucChanExtnRsRedundancy
OBJECT-TYPE
Indicates number of redundant bytes (R) per Reed-Solomon code in the downstream direction.
1.3.6.1.4.1.6296.9.5.1.1.6.1.4INTEGERread-onlycurrent
dsAdslAturChanExtnTable
OBJECT-TYPE
This table is extention to adslAturChanTable defined in rfc-2662. This table provides one row for each ATUR channel. ADSL channel interfaces are those Interface Table entries where ifType is equal to adslInterleave(124) or adslFast(125).
1.3.6.1.4.1.6296.9.5.1.1.7not-accessiblecurrent
dsAdslAturChanExtnEntry
OBJECT-TYPE
An entry (conceptual row) in the dsAdslAturChanExtnTable. The Table is indexed by IfIndex.
1.3.6.1.4.1.6296.9.5.1.1.7.1not-accessiblecurrent
dsAdslAturChanExtnCurrAtmStatus
OBJECT-TYPE
This object indicates an ncd or lcd failure if the counter surpasses 127. If neither ATM counter surpasses 127, the return value will be NoAtmDefect.
1.3.6.1.4.1.6296.9.5.1.1.7.1.1INTEGER {noAtmDefect(0), noCellDelineation(1), lossOfCellDelineation(2)}read-onlycurrent
dsAdslAturChanExtnRsSymbols
OBJECT-TYPE
This object indicates number of DMT symbols per Reed- Solomon code word (S) in the upstream direction Note that S is not restricted to interleaved mode only. Even in fast mode, S is a valid constant value and is equal to 1.
1.3.6.1.4.1.6296.9.5.1.1.7.1.2Unsigned32read-onlycurrent
dsAdslAturChanExtnRsDepth
OBJECT-TYPE
This object indicates interleaving depth (D) in the upstream direction Note that D is not restricted to interleaved mode only. Even in fast mode, D is a valid constant value and is equal to 1.
1.3.6.1.4.1.6296.9.5.1.1.7.1.3Unsigned32read-onlycurrent
dsAdslAturChanExtnRsRedundancy
OBJECT-TYPE
This object indicates number of redundant bytes (R) per Reed-Solomon code in the upstream direction.
1.3.6.1.4.1.6296.9.5.1.1.7.1.4Unsigned32read-onlycurrent
dsAdslAtucPerfDataExtnTable
OBJECT-TYPE
This table provides one row for each ATUC. This table is extention to adslAtucPerfDataTable defined in rfc-2662.
1.3.6.1.4.1.6296.9.5.1.1.8not-accessiblecurrent
dsAdslAtucPerfDataExtnEntry
OBJECT-TYPE
An entry (conceptual row) in the dsAdslAtucPerfDataExtnTable. The Table is indexed by ifIndex.
1.3.6.1.4.1.6296.9.5.1.1.8.1not-accessiblecurrent
dsAdslAtucPerfDataExtnStatFastR
OBJECT-TYPE
The value of this object indicates the count of fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.1
1.3.6.1.4.1.6296.9.5.1.1.8.1.1Gauge32read-onlycurrent
dsAdslAtucPerfDataExtnStatFailedFastR
OBJECT-TYPE
The value of this object indicates the count of failed fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.2
1.3.6.1.4.1.6296.9.5.1.1.8.1.2Gauge32read-onlycurrent
dsAdslAtucPerfDataExtnStatSesL
OBJECT-TYPE
The value of this object indicates the count of severely errored second line. REFERENCE ITU G.997.1 Section 7.2.1.1.7
1.3.6.1.4.1.6296.9.5.1.1.8.1.3Gauge32read-onlycurrent
dsAdslAtucPerfDataExtnStatUasL
OBJECT-TYPE
The value of this object indicates the count of unavailable errored seconds. REFERENCE ITU G.997.1 Section 7.2.1.1.9
1.3.6.1.4.1.6296.9.5.1.1.8.1.4Gauge32read-onlycurrent
dsAdslAtucPerfDataExtnCurr15MinFastR
OBJECT-TYPE
Count of seconds in the current 15 minute interval when there was fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.1
1.3.6.1.4.1.6296.9.5.1.1.8.1.5Gauge32read-onlycurrent
dsAdslAtucPerfDataExtnCurr15MinFailedFastR
OBJECT-TYPE
Count of seconds in the current 15 minute interval when there was failed fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.2
1.3.6.1.4.1.6296.9.5.1.1.8.1.6Gauge32read-onlycurrent
dsAdslAtucPerfDataExtnCurr15MinSesL
OBJECT-TYPE
Count of seconds in the current 15 minute interval when there was severely errored seconds. REFERENCE ITU G.997.1 Section 7.2.1.1.7
1.3.6.1.4.1.6296.9.5.1.1.8.1.7Gauge32read-onlycurrent
dsAdslAtucPerfDataExtnCurr15MinUasL
OBJECT-TYPE
Count of seconds in the current 15 minute interval when there was count for unavailable errored seconds. REFERENCE ITU G.997.1 Section 7.2.1.1.9
1.3.6.1.4.1.6296.9.5.1.1.8.1.8Gauge32read-onlycurrent
dsAdslAtucPerfDataExtnCurr1DayFastR
OBJECT-TYPE
Count of the number of seconds when there was fast retrains during the current day as measured by adslAtucPerfCurr1Day TimeElapsed. REFERENCE ITU G.997.1 Section 7.4.15.1
1.3.6.1.4.1.6296.9.5.1.1.8.1.9Gauge32read-onlycurrent
dsAdslAtucPerfDataExtnCurr1DayFailedFastR
OBJECT-TYPE
Count of the number of seconds when there was failed fast retrains during the current day as measured by adslAtucPerfCurr1Day TimeElapsed.REFERENCE ITU G.997.1 Section 7.4.15.2
1.3.6.1.4.1.6296.9.5.1.1.8.1.10Gauge32read-onlycurrent
dsAdslAtucPerfDataExtnCurr1DaySesL
OBJECT-TYPE
Count of the number of seconds when there was Severely Errored Seconds during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. REFERENCE ITU G.997.1 Section 7.2.1.1.7
1.3.6.1.4.1.6296.9.5.1.1.8.1.11Gauge32read-onlycurrent
dsAdslAtucPerfDataExtnCurr1DayUasL
OBJECT-TYPE
Count of the number of seconds when there was Unavailable Errored Seconds during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. REFERENCE ITU G.997.1 Section 7.2.1.1.9
1.3.6.1.4.1.6296.9.5.1.1.8.1.12Gauge32read-onlycurrent
dsAdslAtucPerfDataExtnPrev1DayFastR
OBJECT-TYPE
Count of seconds in the interval when there was fast retrains within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.4.15.1
1.3.6.1.4.1.6296.9.5.1.1.8.1.13Gauge32read-onlycurrent
dsAdslAtucPerfDataExtnPrev1DayFailedFastR
OBJECT-TYPE
Count of seconds in the interval when there was failed fast retrains within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.4.15.2
1.3.6.1.4.1.6296.9.5.1.1.8.1.14Gauge32read-onlycurrent
dsAdslAtucPerfDataExtnPrev1DaySesL
OBJECT-TYPE
Count of seconds in the interval when there was severely errored seconds within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.2.1.1.7
1.3.6.1.4.1.6296.9.5.1.1.8.1.15Gauge32read-onlycurrent
dsAdslAtucPerfDataExtnPrev1DayUasL
OBJECT-TYPE
Count of seconds in the interval when there was unavailable errored seconds within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.2.1.1.9
1.3.6.1.4.1.6296.9.5.1.1.8.1.16Gauge32read-onlycurrent
dsAdslAtucPerfDataExtnPrev1DayTimeElapsed
OBJECT-TYPE
Total elapsed seconds in this interval in seconds.
1.3.6.1.4.1.6296.9.5.1.1.8.1.17Gauge32read-onlycurrent
dsAdslAtucPerfDataExtnStatFecsL
OBJECT-TYPE
Count of 1-second intervals with one or more forward error correction (FEC) anomalies since agent reset (Not available for ADSL).
1.3.6.1.4.1.6296.9.5.1.1.8.1.18Gauge32read-onlycurrent
dsAdslAtucPerfDataExtnCurr15MinFecsL
OBJECT-TYPE
Count of 1-second intervals, in the current 15 minute interval, with one or more forward error correction (FEC) anomalies (Not available for ADSL).
1.3.6.1.4.1.6296.9.5.1.1.8.1.19Gauge32read-onlycurrent
dsAdslAtucPerfDataExtnCurr1DayFecsL
OBJECT-TYPE
NCount of 1-second intervals, during the current day as measured by adslAtucPerfCurr1Day-TimeElapsed, with one or moreforward error correction (FEC) anomalies (Not available for ADSL).
1.3.6.1.4.1.6296.9.5.1.1.8.1.20Gauge32read-onlycurrent
dsAdslAtucPerfDataExtnPrev1DayFecsL
OBJECT-TYPE
Count of 1-second intervals, within the most recent previous 1-day period, with one or more forward error correction (FEC) anomalies (Not available for ADSL).
1.3.6.1.4.1.6296.9.5.1.1.8.1.21Gauge32read-onlycurrent
dsAdslAtucPerfDataExtnStatLossL
OBJECT-TYPE
Count of 1-second intervals containing one or more loss of signal (LOS) defects (Not available for ADSL).
1.3.6.1.4.1.6296.9.5.1.1.8.1.22Gauge32read-onlycurrent
dsAdslAtucPerfDataExtnCurr15MinLossL
OBJECT-TYPE
.
1.3.6.1.4.1.6296.9.5.1.1.8.1.23Gauge32read-onlycurrent
dsAdslAtucPerfDataExtnCurr1DayLossL
OBJECT-TYPE
.
1.3.6.1.4.1.6296.9.5.1.1.8.1.24Gauge32read-onlycurrent
dsAdslAtucPerfDataExtnPrev1DayLossL
OBJECT-TYPE
.
1.3.6.1.4.1.6296.9.5.1.1.8.1.25Gauge32read-onlycurrent
dsAdslAturPerfDataExtnTable
OBJECT-TYPE
This table provides one row for each ATU-R. ADSL physical interfaces are those Interface Table Entries where ifType is equal to adsl(94). This table is an extn to 'adslAturPerfDataExtTable' which is part of ADSL-LINE-EXT-MIB (rfc 3440).
1.3.6.1.4.1.6296.9.5.1.1.9not-accessiblecurrent
dsAdslAturPerfDataExtnEntry
OBJECT-TYPE
An entry (conceptual row) in the dsAdslAturPerfDataExtnTable. The Table is indexed by ifIndex.
1.3.6.1.4.1.6296.9.5.1.1.9.1not-accessiblecurrent
dsAdslAturPerfDataExtnStatSesL
OBJECT-TYPE
.
1.3.6.1.4.1.6296.9.5.1.1.9.1.1Counter32read-onlycurrent
dsAdslAturPerfDataExtnCurr15MinSesL
OBJECT-TYPE
.
1.3.6.1.4.1.6296.9.5.1.1.9.1.2Gauge32read-onlycurrent
dsAdslAturPerfDataExtnCurr1DaySesL
OBJECT-TYPE
.
1.3.6.1.4.1.6296.9.5.1.1.9.1.3Gauge32read-onlycurrent
dsAdslAturPerfDataExtnPrev1DaySesL
OBJECT-TYPE
.
1.3.6.1.4.1.6296.9.5.1.1.9.1.4Gauge32read-onlycurrent
dsAdslAturPerfDataExtnStatUasL
OBJECT-TYPE
.
1.3.6.1.4.1.6296.9.5.1.1.9.1.5Counter32read-onlycurrent
dsAdslAturPerfDataExtnCurr15MinUasL
OBJECT-TYPE
.
1.3.6.1.4.1.6296.9.5.1.1.9.1.6Gauge32read-onlycurrent
dsAdslAturPerfDataExtnCurr1DayUasL
OBJECT-TYPE
.
1.3.6.1.4.1.6296.9.5.1.1.9.1.7Gauge32read-onlycurrent
dsAdslAturPerfDataExtnPrev1DayUasL
OBJECT-TYPE
.
1.3.6.1.4.1.6296.9.5.1.1.9.1.8Gauge32read-onlycurrent
dsAdslAturPerfDataExtnStatFecsL
OBJECT-TYPE
Count of 1-second intervals with one or more far end forward error correction (FFEC) anomalies since agent reset (Not available for ADSL).
1.3.6.1.4.1.6296.9.5.1.1.9.1.9Counter32read-onlycurrent
dsAdslAturPerfDataExtnCurr15MinFecsL
OBJECT-TYPE
Count of 1-second intervals containing one or more far end loss of signal (LOS) defects (Not available for ADSL).
1.3.6.1.4.1.6296.9.5.1.1.9.1.10Gauge32read-onlycurrent
dsAdslAturPerfDataExtnCurr1DayFecsL
OBJECT-TYPE
Count of 1-second intervals, during the current day as measured by adslAturPerfCurr1Day-TimeElapsed, with one or more far end forward error correction (FFEC) anomalies (Not available for ADSL).
1.3.6.1.4.1.6296.9.5.1.1.9.1.11Gauge32read-onlycurrent
dsAdslAturPerfDataExtnPrev1DayFecsL
OBJECT-TYPE
Count of 1-second intervals, within the most recent previous 1-day period, with one or more far end forward error correction (FFEC) anomalies (Not available for ADSL).
1.3.6.1.4.1.6296.9.5.1.1.9.1.12Gauge32read-onlycurrent
dsAdslAturPerfDataExtnStatLossL
OBJECT-TYPE
Count of 1-second intervals containing one or more far end loss of signal (LOS) defects (Not available for ADSL).
1.3.6.1.4.1.6296.9.5.1.1.9.1.13Counter32read-onlycurrent
dsAdslAturPerfDataExtnCurr15MinLossL
OBJECT-TYPE
.
1.3.6.1.4.1.6296.9.5.1.1.9.1.14Gauge32read-onlycurrent
dsAdslAturPerfDataExtnCurr1DayLossL
OBJECT-TYPE
.
1.3.6.1.4.1.6296.9.5.1.1.9.1.15Gauge32read-onlycurrent
dsAdslAturPerfDataExtnPrev1DayLossL
OBJECT-TYPE
.
1.3.6.1.4.1.6296.9.5.1.1.9.1.16Gauge32read-onlycurrent
dsAdslAtucIntervalExtnTable
OBJECT-TYPE
This table provides one row for each ATUC performance data collection interval. This Table is an extention to adslAtucIntervalTable defined in rfc 2662.
1.3.6.1.4.1.6296.9.5.1.1.10not-accessiblecurrent
dsAdslAtucIntervalExtnEntry
OBJECT-TYPE
An entry (conceptual row) in the dsAdslAtucIntervalExtnTable. The Table is indexed by ifIndex and adslAtucIntervalNumber.
1.3.6.1.4.1.6296.9.5.1.1.10.1not-accessiblecurrent
dsAdslAtucIntervalExtnFastR
OBJECT-TYPE
This variable indicates Count of seconds in the interval when there was Fast Retrains.
1.3.6.1.4.1.6296.9.5.1.1.10.1.1Gauge32read-onlycurrent
dsAdslAtucIntervalExtnFailedFastR
OBJECT-TYPE
This variable indicates Count of seconds in the interval when there was Failed Fast Retrains.
1.3.6.1.4.1.6296.9.5.1.1.10.1.2Gauge32read-onlycurrent
dsAdslAtucIntervalExtnSesL
OBJECT-TYPE
This variable indicates Count of seconds in the interval when there was severely errored seconds.
1.3.6.1.4.1.6296.9.5.1.1.10.1.3Gauge32read-onlycurrent
dsAdslAtucIntervalExtnUasL
OBJECT-TYPE
This variable indicates Count of seconds in the interval when there was unavailable errored seconds.
1.3.6.1.4.1.6296.9.5.1.1.10.1.4Gauge32read-onlycurrent
dsAdslAtucIntervalExtnTimeElapsed
OBJECT-TYPE
This variable indicates the total Elapsed time in this interval.
1.3.6.1.4.1.6296.9.5.1.1.10.1.5Gauge32read-onlycurrent
dsAdslAtucChanPerfDataExtnTable
OBJECT-TYPE
This table provides one row for each ATUC channel. This table is an extention to adslAtucChanPerfDataTable.
1.3.6.1.4.1.6296.9.5.1.1.12not-accessiblecurrent
dsAdslAtucChanPerfDataExtnEntry
OBJECT-TYPE
An entry (conceptual row) in the dsAdslAtucChanPerfDataExtnTable. The Table is indexed by ifIndex.
1.3.6.1.4.1.6296.9.5.1.1.12.1not-accessiblecurrent
dsAdslAtucChanPerfDataExtnTimeElapsed
OBJECT-TYPE
Total elapsed seconds in this interval.
1.3.6.1.4.1.6296.9.5.1.1.12.1.1Gauge32read-onlycurrent
dsAdslAtucChanPerfDataExtnNcd
OBJECT-TYPE
Count of no cell delineation(ncd) on this channel.
1.3.6.1.4.1.6296.9.5.1.1.12.1.2Gauge32read-onlycurrent
dsAdslAtucChanPerfDataExtnOcd
OBJECT-TYPE
Count of out of cell delineation (ocd) on this channel.
1.3.6.1.4.1.6296.9.5.1.1.12.1.3Gauge32read-onlycurrent
dsAdslAtucChanPerfDataExtnHec
OBJECT-TYPE
Header error check counter(hec) on this channel.
1.3.6.1.4.1.6296.9.5.1.1.12.1.4Gauge32read-onlycurrent
dsAdslAtucChanPerfDataExtnCurr15MinNcd
OBJECT-TYPE
Count of no cell delineation(ncd) on this channel within the current 15 minute time interval.
1.3.6.1.4.1.6296.9.5.1.1.12.1.5Gauge32read-onlycurrent
dsAdslAtucChanPerfDataExtnCurr15MinOcd
OBJECT-TYPE
Count of out of cell delineation (ocd) on this channel within the current 15 minute time interval.
1.3.6.1.4.1.6296.9.5.1.1.12.1.6Gauge32read-onlycurrent
dsAdslAtucChanPerfDataExtnCurr15MinHec
OBJECT-TYPE
Header error check counter(hec) on this channel within the current 15 minute time interval.
1.3.6.1.4.1.6296.9.5.1.1.12.1.7Gauge32read-onlycurrent
dsAdslAtucChanPerfDataExtnCurr1DayNcd
OBJECT-TYPE
Count of no cell delineation (ncd) on this channel within the current 1 day time interval.
1.3.6.1.4.1.6296.9.5.1.1.12.1.8Gauge32read-onlycurrent
dsAdslAtucChanPerfDataExtnCurr1DayOcd
OBJECT-TYPE
Count of out of cell delineation (ocd) on this channel within the current 1 day time interval.
1.3.6.1.4.1.6296.9.5.1.1.12.1.9Gauge32read-onlycurrent
dsAdslAtucChanPerfDataExtnCurr1DayHec
OBJECT-TYPE
Header error check counter (hec) on this channel within the current 1 day time interval.
1.3.6.1.4.1.6296.9.5.1.1.12.1.10Gauge32read-onlycurrent
dsAdslAtucChanPerfDataExtnPrev1DayNcd
OBJECT-TYPE
Count of no cell delineation (ncd) on this channel within the most recent previous 1-day period.
1.3.6.1.4.1.6296.9.5.1.1.12.1.11Gauge32read-onlycurrent
dsAdslAtucChanPerfDataExtnPrev1DayOcd
OBJECT-TYPE
Count of out of cell delineation (ocd) on this channel within the most recent previous 1-day period.
1.3.6.1.4.1.6296.9.5.1.1.12.1.12Gauge32read-onlycurrent
dsAdslAtucChanPerfDataExtnPrev1DayHec
OBJECT-TYPE
Header error check counter(hec) on this channel within the most recent previous 1-day period.
1.3.6.1.4.1.6296.9.5.1.1.12.1.13Gauge32read-onlycurrent
dsAdslAturChanPerfDataExtnTable
OBJECT-TYPE
This table is extention to adslAturChanPerfDataTable defined in rfc-2662. This table contains the Performance Data for that ATU-R channel (fast or interleaved).
1.3.6.1.4.1.6296.9.5.1.1.13not-accessiblecurrent
dsAdslAturChanPerfDataExtnEntry
OBJECT-TYPE
An entry (conceptual row) in the dsAdslAturChanPerfDataExtnTable. The Table is indexed by IfIndex.
1.3.6.1.4.1.6296.9.5.1.1.13.1not-accessiblecurrent
dsAdslAturChanPerfDataExtnNcd
OBJECT-TYPE
Number of packets with no cell delineation(NCD) error on this channel.
1.3.6.1.4.1.6296.9.5.1.1.13.1.1Gauge32read-onlycurrent
dsAdslAturChanPerfDataExtnHec
OBJECT-TYPE
Number of packets with Header error check (HEC) error on this channel.
1.3.6.1.4.1.6296.9.5.1.1.13.1.2Gauge32read-onlycurrent
dsAdslAturChanPerfDataExtnCurr15MinNcd
OBJECT-TYPE
Number of packets with no cell delineation(NCD) error on this channel within the current 15 minute time interval.
1.3.6.1.4.1.6296.9.5.1.1.13.1.3Gauge32read-onlycurrent
dsAdslAturChanPerfDataExtnCurr15MinHec
OBJECT-TYPE
Number of packets with Header error check (HEC) error on this channel within the current 15 minute time interval.
1.3.6.1.4.1.6296.9.5.1.1.13.1.4Gauge32read-onlycurrent
dsAdslAturChanPerfDataExtnCurr1DayNcd
OBJECT-TYPE
Number of packets with no cell delineation (NCD) error on this channel within the current 1 day time interval.
1.3.6.1.4.1.6296.9.5.1.1.13.1.5Gauge32read-onlycurrent
dsAdslAturChanPerfDataExtnCurr1DayHec
OBJECT-TYPE
Number of packets with Header error check (HEC) error on this channel within the current 1 day time interval.
1.3.6.1.4.1.6296.9.5.1.1.13.1.6Gauge32read-onlycurrent
dsAdslAturChanPerfDataExtnPrev1DayNcd
OBJECT-TYPE
Number of packets with no cell delineation (NCD) error on this channel within the most recent previous period.
1.3.6.1.4.1.6296.9.5.1.1.13.1.7Gauge32read-onlycurrent
dsAdslAturChanPerfDataExtnPrev1DayHec
OBJECT-TYPE
Number of packets with Header error check (HEC) error on this channel within the most recent previous period.
1.3.6.1.4.1.6296.9.5.1.1.13.1.8Gauge32read-onlycurrent
dsAdslAtucChanIntervalExtnTable
OBJECT-TYPE
This table provides a row for each ATUC channel's performance data collection interval. This table is an extension to adslAtucChanIntervalTable defined in rfc 2662.
1.3.6.1.4.1.6296.9.5.1.1.14not-accessiblecurrent
dsAdslAtucChanIntervalExtnEntry
OBJECT-TYPE
An entry (conceptual row) in the dsAdslAtucChanIntervalExtnTable. The Table is indexed by ifIndex and adslAtucChanIntervalNumber.
1.3.6.1.4.1.6296.9.5.1.1.14.1not-accessiblecurrent
dsAdslAtucChanIntervalExtnTimeElapsed
OBJECT-TYPE
Total time elapsed (in seconds) in this interval.
1.3.6.1.4.1.6296.9.5.1.1.14.1.1Counter32read-onlycurrent
dsAdslAtucChanIntervalExtnNcd
OBJECT-TYPE
Indicates count of no cell delineation on this channel for this interval.
1.3.6.1.4.1.6296.9.5.1.1.14.1.2Counter32read-onlycurrent
dsAdslAtucChanIntervalExtnOcd
OBJECT-TYPE
Indicates count of out cell delineation on this channel for this interval.
1.3.6.1.4.1.6296.9.5.1.1.14.1.3Counter32read-onlycurrent
dsAdslAtucChanIntervalExtnHec
OBJECT-TYPE
Indicates Header error check counter on this channel during this interval.
1.3.6.1.4.1.6296.9.5.1.1.14.1.4Counter32read-onlycurrent
dsAdslAturChanIntervalExtnTable
OBJECT-TYPE
This table is extention to adslAturChanIntervalTable defined in rfc-2662. This table provides one row for each ATUR channel's performance data collection interval.
1.3.6.1.4.1.6296.9.5.1.1.15not-accessiblecurrent
dsAdslAturChanIntervalExtnEntry
OBJECT-TYPE
An entry (conceptual row) in the dsAdslAturChanIntervalExtnTable. The Table is indexed by IfIndex and dsAdslAturChanIntervalExtnNumber.
1.3.6.1.4.1.6296.9.5.1.1.15.1not-accessiblecurrent
dsAdslAturChanIntervalExtnNcd
OBJECT-TYPE
Indicates count of no cell delineation on this channel for this interval.
1.3.6.1.4.1.6296.9.5.1.1.15.1.1Gauge32read-onlycurrent
dsAdslAturChanIntervalExtnHec
OBJECT-TYPE
Indicates Header error check counter on this channel during this interval.
1.3.6.1.4.1.6296.9.5.1.1.15.1.2Gauge32read-onlycurrent
dsAdslLineConfProfileExtnTable
OBJECT-TYPE
This table contains information on the ADSL line configuration. This Table is an extension to adslLineConfProfileTable.
1.3.6.1.4.1.6296.9.5.1.1.16not-accessiblecurrent
dsAdslLineConfProfileExtnEntry
OBJECT-TYPE
An entry (conceptual row) in the dsAdslLineConfProfileExtnTable. The Table is indexed by adslLineConfProfileName.
1.3.6.1.4.1.6296.9.5.1.1.16.1not-accessiblecurrent
dsAdslLineConfProfileName
OBJECT-TYPE
This object is used by the line configuration table in order to identify a row of this table.
1.3.6.1.4.1.6296.9.5.1.1.16.1.1OCTET STRING (SIZE(0..32))not-accessiblecurrent
dsAdslLineConfProfileExtnRsIntCorrectionUp
OBJECT-TYPE
Sets the correction time for the upstream-interleaved buffer. RS can also be disabled. The Default Value for ADSL+ is 3.
1.3.6.1.4.1.6296.9.5.1.1.16.1.3INTEGER {dsAdslLineConfProfileExtnTable125us(3), dsAdslLineConfProfileExtnTable250us(4), dsAdslLineConfProfileExtnTable500us(5), dsAdslLineConfProfileExtnTable1ms(6), dsAdslLineConfProfileExtnTable2ms(7), dsAdslLineConfProfileExtnTable4ms(8), disable(15)}read-writecurrent
dsAdslLineConfProfileExtnLineType
OBJECT-TYPE
This object is used to configure the ADSL physical line mode.
1.3.6.1.4.1.6296.9.5.1.1.16.1.4INTEGER {noChannel(1), fastOnly(2), interleavedOnly(3), fastOrInterleaved(4), fastAndInterleaved(5)}read-writecurrent
dsAdslLineConfProfileExtnTxEndBin
OBJECT-TYPE
Highest bin number allowed for Tx signal. The Range & default for ADSL+ is 0x06 - 0x1ff and 0x1ff respectively.
1.3.6.1.4.1.6296.9.5.1.1.16.1.5INTEGER (6..511)read-writecurrent
dsAdslLineConfProfileExtnTxStartBin
OBJECT-TYPE
Lowest bin number allowed for Tx signal.The Range for ADSL+ is 0x06 - 0x1ff. The Default for Annex B is 0x40 respectively.
1.3.6.1.4.1.6296.9.5.1.1.16.1.6INTEGER (6..511)read-writecurrent
dsAdslLineConfProfileExtnRxStartBin
OBJECT-TYPE
Lowest bin number allowed for Rx signal. The Range for ADSL+ is 0x01 - 0x1ff. The default for Annex B is 0x01.
1.3.6.1.4.1.6296.9.5.1.1.16.1.8INTEGER (1..511)read-writecurrent
dsAdslLineConfProfileExtnRxEndBin
OBJECT-TYPE
Highest bin number allowed for Rx signal. The Range and default value for ADSL+ is 0x01 - 0x1ff and 0x1d respectively.
1.3.6.1.4.1.6296.9.5.1.1.16.1.9INTEGER (6..511)read-writecurrent
dsAdslLineConfProfileExtnRxBinAdjust
OBJECT-TYPE
Employs Rx Start/End bin settings.
1.3.6.1.4.1.6296.9.5.1.1.16.1.10INTEGER {disable(0)}read-writecurrent
dsAdslLineConfProfileExtnStandard
OBJECT-TYPE
Preferred standard compliance. Outcome is dependent upon standard support of the remote unit.GlobespanVirata High Speed ADSL DMT (ADSL+) applications only.
1.3.6.1.4.1.6296.9.5.1.1.16.1.13INTEGER {t1413(0), gLite(1), gDmt(2), alctl14(3), multimode(4), adi(5), alctl(6), t1413Auto(9), adsl2(26), adsl2Plus(27), readsl2(28), adsl2Auto(29), adsl2PlusAuto(30), adslPlus(48), gspanPlus(49)}read-writecurrent
dsAdslLineConfProfileExtnTxPowerAttenuation
OBJECT-TYPE
Specifies value of Tx power attenuation.
1.3.6.1.4.1.6296.9.5.1.1.16.1.15INTEGER {dsAdslLineConfProfileExtnTable0(0), dsAdslLineConfProfileExtnTable1(1), dsAdslLineConfProfileExtnTable2(2), dsAdslLineConfProfileExtnTable3(3), dsAdslLineConfProfileExtnTable4(4), dsAdslLineConfProfileExtnTable5(5), dsAdslLineConfProfileExtnTable6(6), dsAdslLineConfProfileExtnTable7(7), dsAdslLineConfProfileExtnTable8(8), dsAdslLineConfProfileExtnTable9(9), dsAdslLineConfProfileExtnTable10(10), dsAdslLineConfProfileExtnTable11(11), dsAdslLineConfProfileExtnTable12(12), point1(13), point2(14), point3(15), point4(16), point5(17), point6(18), point7(19), point8(20), point9(21), dsAdslLineConfProfileExtnTable13(32781), dsAdslLineConfProfileExtnTable14(32782), dsAdslLineConfProfileExtnTable15(32783), dsAdslLineConfProfileExtnTable16(32784), dsAdslLineConfProfileExtnTable17(32785), dsAdslLineConfProfileExtnTable18(32786), dsAdslLineConfProfileExtnTable19(32787), dsAdslLineConfProfileExtnTable20(32788), dsAdslLineConfProfileExtnTable21(32789), dsAdslLineConfProfileExtnTable22(32790), dsAdslLineConfProfileExtnTable23(32791), dsAdslLineConfProfileExtnTable24(32792), dsAdslLineConfProfileExtnTable25(32793), dsAdslLineConfProfileExtnTable26(32794), dsAdslLineConfProfileExtnTable27(32795), dsAdslLineConfProfileExtnTable28(32796), dsAdslLineConfProfileExtnTable29(32797), dsAdslLineConfProfileExtnTable30(32798), dsAdslLineConfProfileExtnTable31(32799), dsAdslLineConfProfileExtnTable32(32800), dsAdslLineConfProfileExtnTable33(32801), dsAdslLineConfProfileExtnTable34(32802), dsAdslLineConfProfileExtnTable35(32803), dsAdslLineConfProfileExtnTable36(32804), dsAdslLineConfProfileExtnTable37(32805), dsAdslLineConfProfileExtnTable38(32806), dsAdslLineConfProfileExtnTable39(32807), dsAdslLineConfProfileExtnTable40(32808)}read-writecurrent
dsAdslLineConfProfileExtnRsFastOvrhdDown
OBJECT-TYPE
Sets the percentage overhead for the downstream-fast buffer.
1.3.6.1.4.1.6296.9.5.1.1.16.1.17INTEGER {dsAdslLineConfProfileExtnTable50(1), dsAdslLineConfProfileExtnTable25(2), dsAdslLineConfProfileExtnTable12(3), dsAdslLineConfProfileExtnTable6(4), dsAdslLineConfProfileExtnTable3(5), dsAdslLineConfProfileExtnTable1(7), disable(15)}read-writecurrent
dsAdslLineConfProfileExtnIntCorrectionDown
OBJECT-TYPE
This parameter sets the correction time for the downstream interleaved buffer.RS can also be disabled.
1.3.6.1.4.1.6296.9.5.1.1.16.1.18INTEGER {dsAdslLineConfProfileExtnTable125Us(3), dsAdslLineConfProfileExtnTable250Us(4), dsAdslLineConfProfileExtnTable500Us(5), dsAdslLineConfProfileExtnTable1Ms(6), dsAdslLineConfProfileExtnTable2Ms(7), dsAdslLineConfProfileExtnTable4Ms(8), disable(15)}read-writecurrent
dsAdslLineConfProfileExtnRsFastOvrhdUp
OBJECT-TYPE
Sets the 4576014verhead for the upstream-fast buffer.
1.3.6.1.4.1.6296.9.5.1.1.16.1.19INTEGER {dsAdslLineConfProfileExtnTable50(1), dsAdslLineConfProfileExtnTable25(2), dsAdslLineConfProfileExtnTable12(3), dsAdslLineConfProfileExtnTable6(4), dsAdslLineConfProfileExtnTable3(5), dsAdslLineConfProfileExtnTable1(7), disable(15)}read-writecurrent
dsAdslLineConfProfileExtnAnnexType
OBJECT-TYPE
This parameter is set as per annex compliance of the code release. GlobespanVirata High Speed ADSL DMT (ADSL+) applications only.
1.3.6.1.4.1.6296.9.5.1.1.16.1.26INTEGER {annexA(0), annexB(1), highSpeed(2), annexADSL2(5)}read-writecurrent
dsAdslLineConfProfileExtnMaxDCo
OBJECT-TYPE
This object is used to indicate Maximum interleaving depth supported by the customer's hardware.
1.3.6.1.4.1.6296.9.5.1.1.16.1.30INTEGER {dsAdslLineConfProfileExtnTable64(0), dsAdslLineConfProfileExtnTable128(4096), dsAdslLineConfProfileExtnTable256(8192)}read-writecurrent
dsAdslLineConfProfileExtnAdvertisedCapabilities
OBJECT-TYPE
Controls if the CO will attempt to startup using alternate standards if the CPE does not support ADSL+.
1.3.6.1.4.1.6296.9.5.1.1.16.1.32INTEGER {disable(0), annexa(1), annexb(2), adslplus(16)}read-writecurrent
dsAdslLineConfProfileExtnPsdMaskType
OBJECT-TYPE
Selects the PSD mask option to be used.
1.3.6.1.4.1.6296.9.5.1.1.16.1.33INTEGER {adsl(0), hsadslM1(3), hsadslM2(4), adls2NonovlpFlat(259), adsl2NonovlpM1(275), adls2NonovlpM2(291), msk2Rfi(32768), flatMskRfi(32771), cabMsk2Rfi(32772), coMsk2Rfio(49152)}read-writecurrent
dsAdslLineConfProfileExtnLineDmtConfMode
OBJECT-TYPE
Selects if there is overlap or no overlap of bins.
1.3.6.1.4.1.6296.9.5.1.1.16.1.34INTEGER {ecMode(1), fdmMode(2)}read-writecurrent
dsAdslLineConfProfileExtnUpstreamPSD
OBJECT-TYPE
This object sets the upstream PSD to be either extended or standard. Used for GSpan Plus only.
1.3.6.1.4.1.6296.9.5.1.1.16.1.41INTEGER {standard(0), jj100(1), extended(32768)}read-writecurrent
dsAdslLineConfProfileExtnPMMode
OBJECT-TYPE
PM-related parameter used by the ATU-C to set the allowed link states.
1.3.6.1.4.1.6296.9.5.1.1.16.1.42Bits {pmstatel3enable(0), pmstatel2enable(1)}read-writecurrent
dsAdslLineConfProfileExtnPML0Time
OBJECT-TYPE
PM configuration parameter, related to the L2 low power state. This parameter represents the minimum time (in seconds) between an exit from the L2 state and the next entry into the L2 state.
1.3.6.1.4.1.6296.9.5.1.1.16.1.43INTEGER (0..255)read-writecurrent
dsAdslLineConfProfileExtnPML2Time
OBJECT-TYPE
PM configuration parameter, related to the L2 low power state. This parameter represents the minimum time (in seconds) between an Entry into the L2 state and the first Power Trim in the L2 state and between two consecutive Power Trims in the L2 State.
1.3.6.1.4.1.6296.9.5.1.1.16.1.44INTEGER (0..255)read-writecurrent
dsAdslLineConfProfileExtnPML2ATPR
OBJECT-TYPE
PM configuration parameter, related to the L2 low power state. This parameter represents the maximum aggregate transmit power reduction (in dB) that can be performed through a single Power Trim in the L2 state.
1.3.6.1.4.1.6296.9.5.1.1.16.1.45INTEGER (0..31)read-writecurrent
dsAdslLineConfProfileExtnPML2Rate
OBJECT-TYPE
PM configuration parameter, related to the L2 low power state. This parameter specifies the minimum net data rate during the low power state (L2). The data rate is coded in bit/s.
1.3.6.1.4.1.6296.9.5.1.1.16.1.46INTEGER (256000..1024000)read-writecurrent
dsAdslLineConfProfileExtnAtucConfMinINP
OBJECT-TYPE
Parameter used to specify the minimum impulse noise protection for the downstream bearer channel.
1.3.6.1.4.1.6296.9.5.1.1.16.1.63INTEGER (0..400)read-onlycurrent
dsAdslLineConfProfileExtnPML2EntryThresholdRate
OBJECT-TYPE
PM configuration parameter, related to the L2 low power state. This parameter specifies the downstream data rate threshold that triggers autonomous entry into low power state (L2). The data rate is coded in bit/s, and must be less than or equal to the value of GSMIB_adslAtucConfGsPML2Exit ThresholdRate.
1.3.6.1.4.1.6296.9.5.1.1.16.1.64INTEGER (256000..1024000)read-writecurrent
dsAdslLineConfProfileExtnPML2ExitThresholdRate
OBJECT-TYPE
PM configuration parameter, related to the L2 low power state. This parameter specifies the downstream data rate threshold that triggers autonomous exit from low power state (L2). The data rate is coded in bit/s, and must be less than the value of GSMIB_adslAtucConfPML2MinRate.
1.3.6.1.4.1.6296.9.5.1.1.16.1.65INTEGER (256000..1024000)read-writecurrent
dsAdslLineConfProfileExtnPML2EntryRateMinTime
OBJECT-TYPE
PM configuration parameter, related to the L2 low power state. This parameter specifies the minimum interval of time that the net data rate for the bearer channel should stay below GSMIB_adslAtucConfGsPML2EntryThresholdRate before autonomous entry into low power state (L2). The minimum entry rate time is coded in seconds, and can range from 900 to 65535.
1.3.6.1.4.1.6296.9.5.1.1.16.1.66INTEGER (900..65535)read-writecurrent
dsAdslLineAlarmConfProfileExtnTable
OBJECT-TYPE
This table contains information on the ADSL line configuration. This table is an extention to adslLineAlarmConfProfileExtnTable defined in rfc 2662.
1.3.6.1.4.1.6296.9.5.1.1.17not-accessiblecurrent
dsAdslLineAlarmConfProfileExtnEntry
OBJECT-TYPE
An entry (conceptual row) in the dsAdslLineAlarmConfProfileExtnTable. The Table is indexed by adslLineAlarmConfProfileName.
1.3.6.1.4.1.6296.9.5.1.1.17.1not-accessiblecurrent
dsAdslLineAlarmConfProfileName
OBJECT-TYPE
This object is used by the line alarm configuration Extn table in order to identify a row of this table. When `dynamic' profiles are implemented, the profile name is user specified. Also, the system will always provide a default profile whose name is `DEND
1.3.6.1.4.1.6296.9.5.1.1.17.1.1OCTET STRING (SIZE(0..32))not-accessiblecurrent
dsAdslLineAlarmExtnAtucThresh15MinFailFastR
OBJECT-TYPE
The number of failed retrains encountered by an ADSL interface within any giving 15 minutes performance data collection period, which cause the SNMP agent to send an adslAtucFailedFastRTrap.
1.3.6.1.4.1.6296.9.5.1.1.17.1.2INTEGER (0..900)read-writecurrent
dsAdslLineAlarmExtnAtucThresh15MinSesL
OBJECT-TYPE
The number of Severe errored seconds encountered by an ADSL interface within any giving 15 minutes performance data collection period, which cause the SNMP to send an adslAtucSesLTrap.
1.3.6.1.4.1.6296.9.5.1.1.17.1.3INTEGER (0..900)read-writecurrent
dsAdslLineAlarmExtnAtucThresh15MinUasL
OBJECT-TYPE
The first time the value of the corresponding instance of adslAtucPerf15MinUasL reaches or exceeds this value within a given 15-minute performance data collection period, an adslAtucUasLThreshTrap notifications will be generated.
1.3.6.1.4.1.6296.9.5.1.1.17.1.4INTEGER (0..900)read-writecurrent
dsAdslLineAlarmExtnAtucOpStateTrapEnable
OBJECT-TYPE
Enables and disables the OpStateChangeTrap.
1.3.6.1.4.1.6296.9.5.1.1.17.1.5INTEGER {disable(0), enable(1)}read-writecurrent
dsAdslLineAlarmExtnAtucThresh15MinFecsL
OBJECT-TYPE
The number of Forward error correction seconds encountered by an ADSL interface within any giving 15 Minutes performance data collection period, which cause the SNMP agent to send an ' dsAdslAtucTrapsPerfFecsLThresh'.
1.3.6.1.4.1.6296.9.5.1.1.17.1.6Integer32 (0..900)read-writecurrent
dsAdslLineAlarmExtnAtucThresh1DayLofs
OBJECT-TYPE
The number of Loss of Frame Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfLofsThresh1DayTrap'.
1.3.6.1.4.1.6296.9.5.1.1.17.1.7Integer32 (0..86400)read-writecurrent
dsAdslLineAlarmExtnAtucThresh1DayLoss
OBJECT-TYPE
The number of Loss of Signal Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfLossThresh1DayTrap'.
1.3.6.1.4.1.6296.9.5.1.1.17.1.8Integer32 (0..86400)read-writecurrent
dsAdslLineAlarmExtnAtucThresh1DayLols
OBJECT-TYPE
The number of Loss of Link Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfLolsThresh1DayTrap'.
1.3.6.1.4.1.6296.9.5.1.1.17.1.9Integer32 (0..86400)read-writecurrent
dsAdslLineAlarmExtnAtucThresh1DayLprs
OBJECT-TYPE
The number of Loss of Power Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfLprsThresh1DayTrap'.
1.3.6.1.4.1.6296.9.5.1.1.17.1.10Integer32 (0..86400)read-writecurrent
dsAdslLineAlarmExtnAtucThresh1DayESs
OBJECT-TYPE
The number of Errored Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfESsThresh1DayTrap'.
1.3.6.1.4.1.6296.9.5.1.1.17.1.11Integer32 (0..86400)read-writecurrent
dsAdslLineAlarmExtnAtucThresh1DaySesL
OBJECT-TYPE
The number of Severe errored Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfSesLThresh1DayTrap'.
1.3.6.1.4.1.6296.9.5.1.1.17.1.12Integer32 (0..86400)read-writecurrent
dsAdslLineAlarmExtnAtucThresh1DayUasL
OBJECT-TYPE
The number of unavailable errored seconds encountered by an ADSL interface within any giving 1 day performance data collection period, which cause the SNMP agent to send an 'dsAdslAtucPerfUasLThresh1DayTrap'.
1.3.6.1.4.1.6296.9.5.1.1.17.1.13Integer32 (0..86400)read-writecurrent
dsAdslLineAlarmExtnAtucThresh1DayFecsL
OBJECT-TYPE
The number of Forward error correction seconds encountered by an ADSL interface within any giving 1 day performance data collection period, which cause the SNMP agent to send an ' dsAdslAtucTrapsPerfFecsLThresh1Day'.
1.3.6.1.4.1.6296.9.5.1.1.17.1.14Integer32 (0..86400)read-writecurrent
dsAdslLineAlarmExtnAturThresh15MinFecsL
OBJECT-TYPE
The number of Forward error correction seconds encountered by an ADSL interface within any giving 15 Minutes performance data collection period, which cause the SNMP agent to send an ' dsAdslAturTrapsPerfFecsLThresh'.
1.3.6.1.4.1.6296.9.5.1.1.17.1.15Integer32 (0..900)read-writecurrent
dsAdslLineAlarmExtnAturThresh1DayLofs
OBJECT-TYPE
The number of Loss of Frame Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfLofsThresh1DayTrap'.
1.3.6.1.4.1.6296.9.5.1.1.17.1.16Integer32 (0..86400)read-writecurrent
dsAdslLineAlarmExtnAturThresh1DayLoss
OBJECT-TYPE
The number of Loss of Signal Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfLossThresh1DayTrap'.
1.3.6.1.4.1.6296.9.5.1.1.17.1.17Integer32 (0..86400)read-writecurrent
dsAdslLineAlarmExtnAturThresh1DayLprs
OBJECT-TYPE
The number of Loss of Power Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfLprsThresh1DayTrap'.
1.3.6.1.4.1.6296.9.5.1.1.17.1.18Integer32 (0..86400)read-writecurrent
dsAdslLineAlarmExtnAturThresh1DayESs
OBJECT-TYPE
The number of Errored Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfESsThresh1DayTrap'.
1.3.6.1.4.1.6296.9.5.1.1.17.1.19Integer32 (0..86400)read-writecurrent
dsAdslLineAlarmExtnAturThresh1DaySesL
OBJECT-TYPE
The number of Severe errored Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfSesLThresh1DayTrap'.
1.3.6.1.4.1.6296.9.5.1.1.17.1.20Integer32 (0..86400)read-writecurrent
dsAdslLineAlarmExtnAturThresh1DayUasL
OBJECT-TYPE
The number of unavailable errored seconds encountered by an ADSL interface within any giving 1 day performance data collection period, which cause the SNMP agent to send an 'dsAdslAturPerfUasLThresh1DayTrap'.
1.3.6.1.4.1.6296.9.5.1.1.17.1.21Integer32 (0..86400)read-writecurrent
dsAdslLineAlarmExtnAturThresh1DayFecsL
OBJECT-TYPE
The number of Forward error correction seconds encountered by an ADSL interface within any giving 1 day performance data collection period, which cause the SNMP agent to send an ' dsAdslAturTrapsPerfFecsLThresh1Day'.
1.3.6.1.4.1.6296.9.5.1.1.17.1.22Integer32 (0..86400)read-writecurrent
dsAdslLineAlarmExtnAturThresh15MinSesL
OBJECT-TYPE
The number of Forward error correction seconds encountered by an ADSL interface within any giving 15 Minutes performance data collection period, which cause the SNMP agent to send an ' dsAdslAtucTrapsPerfFecsLThresh'.
1.3.6.1.4.1.6296.9.5.1.1.17.1.23Integer32 (0..900)read-writecurrent
dsAdslLineAlarmExtnAturThresh15MinUasL
OBJECT-TYPE
The number of Forward error correction seconds encountered by an ADSL interface within any giving 15 Minutes performance data collection period, which cause the SNMP agent to send an ' dsAdslAtucTrapsPerfFecsLThresh'.
1.3.6.1.4.1.6296.9.5.1.1.17.1.24Integer32 (0..900)read-writecurrent
dsAdslLineAlarmExtnAtucPmStateTrapEnable
OBJECT-TYPE
Enables and disables the PmStateChangeTrap.
1.3.6.1.4.1.6296.9.5.1.1.17.1.25INTEGER {disable(0), enable(1)}read-writecurrent
dsAdslTrap
OBJECT-IDENTITY
1.3.6.1.4.1.6296.9.5.1.2
dsAdslAtucTraps
OBJECT-IDENTITY
1.3.6.1.4.1.6296.9.5.1.2.1
dsAdslAturTraps
OBJECT-IDENTITY
1.3.6.1.4.1.6296.9.5.1.2.2

Notifications

NameOIDStatus
dsAdslAtucOpStateChangeTrap
NOTIFICATION-TYPE
Operational state of the transceiver is changed
1.3.6.1.4.1.6296.9.5.1.2.1.1current
dsAdslAtucPmStateChangeTrap
NOTIFICATION-TYPE
Current PM state of the transceiver is changed.
1.3.6.1.4.1.6296.9.5.1.2.1.2current
dsAdslAtucPerfFailedFastRThreshTrap
NOTIFICATION-TYPE
Failed retrains 15-minute interval threshold reached
1.3.6.1.4.1.6296.9.5.1.2.1.3current
dsAdslAtucPerfSesLThreshTrap
NOTIFICATION-TYPE
Severely Errored Seconds 15-minute interval threshold reached
1.3.6.1.4.1.6296.9.5.1.2.1.4current
dsAdslAtucPerfUasLThreshTrap
NOTIFICATION-TYPE
Unavailable Errored Seconds 15-minute interval threshold reached
1.3.6.1.4.1.6296.9.5.1.2.1.5current
dsAdslAtucPerfFecsLThreshTrap
NOTIFICATION-TYPE
Forward error correction 15-minute interval threshold reached
1.3.6.1.4.1.6296.9.5.1.2.1.6current
dsAdslAtucPerfLofsThresh1DayTrap
NOTIFICATION-TYPE
Loss of Frames 1-day interval threshold reached
1.3.6.1.4.1.6296.9.5.1.2.1.7current
dsAdslAtucPerfLossThresh1DayTrap
NOTIFICATION-TYPE
Loss of Signal 1-day interval threshold reached
1.3.6.1.4.1.6296.9.5.1.2.1.8current
dsAdslAtucPerfLolsThresh1DayTrap
NOTIFICATION-TYPE
Loss of Link 1-day interval threshold reached
1.3.6.1.4.1.6296.9.5.1.2.1.9current
dsAdslAtucPerfLprsThresh1DayTrap
NOTIFICATION-TYPE
Loss of Power 1-day interval threshold reached
1.3.6.1.4.1.6296.9.5.1.2.1.10current
dsAdslAtucPerfESsThresh1DayTrap
NOTIFICATION-TYPE
Errored Seconds 1-day interval threshold reached
1.3.6.1.4.1.6296.9.5.1.2.1.11current
dsAdslAtucPerfSesLThresh1DayTrap
NOTIFICATION-TYPE
Severely Errored Seconds 1-day interval threshold reached
1.3.6.1.4.1.6296.9.5.1.2.1.12current
dsAdslAtucPerfUasLThresh1DayTrap
NOTIFICATION-TYPE
Unavailable Errored Seconds 1-day interval threshold reached
1.3.6.1.4.1.6296.9.5.1.2.1.13current
dsAdslAtucPerfFecsLThresh1DayTrap
NOTIFICATION-TYPE
Forward error correction Seconds 1-day interval threshold reached
1.3.6.1.4.1.6296.9.5.1.2.1.14current
dsAdslAturSesLThreshTrap
NOTIFICATION-TYPE
Severely Errored Seconds 15-minute interval threshold reached
1.3.6.1.4.1.6296.9.5.1.2.2.1current
dsAdslAturUasLThreshTrap
NOTIFICATION-TYPE
Unavailable Errored Seconds 15-minute interval threshold reached
1.3.6.1.4.1.6296.9.5.1.2.2.2current
dsAdslAturPerfFecsLThreshTrap
NOTIFICATION-TYPE
Forward error correction 15-minute interval threshold reached
1.3.6.1.4.1.6296.9.5.1.2.2.3current
dsAdslAturPerfLofsThresh1DayTrap
NOTIFICATION-TYPE
Loss of Frames 1-day interval threshold reached
1.3.6.1.4.1.6296.9.5.1.2.2.4current
dsAdslAturPerfLossThresh1DayTrap
NOTIFICATION-TYPE
Loss of Signal 1-day interval threshold reached
1.3.6.1.4.1.6296.9.5.1.2.2.5current
dsAdslAturPerfLprsThresh1DayTrap
NOTIFICATION-TYPE
Loss of Power 1-day interval threshold reached
1.3.6.1.4.1.6296.9.5.1.2.2.6current
dsAdslAturPerfESsThresh1DayTrap
NOTIFICATION-TYPE
Errored Seconds 1-day interval threshold reached
1.3.6.1.4.1.6296.9.5.1.2.2.7current
dsAdslAturPerfSesLThresh1DayTrap
NOTIFICATION-TYPE
Severely Errored Seconds 1-day interval threshold reached
1.3.6.1.4.1.6296.9.5.1.2.2.8current
dsAdslAturPerfUasLThresh1DayTrap
NOTIFICATION-TYPE
Unavailable Errored Seconds 1-day interval threshold reached
1.3.6.1.4.1.6296.9.5.1.2.2.9current
dsAdslAturPerfFecsLThresh1DayTrap
NOTIFICATION-TYPE
Forward error correction Seconds 1-day interval threshold is reached
1.3.6.1.4.1.6296.9.5.1.2.2.10current