MIBs Depot

CYCLADES-ACS-CONF-MIB

Registered at
1.3.6.1.4.1.2925.4.2
Last updated
2005-08-29 00:00
Organization
Cyclades Corporation
Revisions
2005-08-29 00:00, 2003-06-30 00:00, 2003-01-17 00:00, 2002-10-20 00:00, 2002-09-20 00:00
Namespace
cyclades
Source file
CYCLADES-ACS-CONF-MIB
Digest
sha256:0d2260611c8b1887abc307431ea82dacc2392a8384ecf4794fa5d2167956365d

Description

This module defines objects for the ACS/TS configuration

Contact

postal : Cyclades Corporation 3541 Gateway Boulevard Fremont, CA 94538, USA e-mail : Technical Support support@cyclades.com

Imports

FromSymbols
CYCLADES-ACS-MIBcyACSMgmt
IF-MIBInterfaceIndexOrZero
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

CYCLADES-ACS-CONF-MIB
CYCLADES-ACS-MIB
CYCLADES-MIB
IANAifType-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
cyHostName
OBJECT-TYPE
The Host Name
1.3.6.1.4.1.2925.4.2.1DisplayString (SIZE(1..40))read-writecurrent
cyConsoleBanner
OBJECT-TYPE
The console banner
1.3.6.1.4.1.2925.4.2.2DisplayString (SIZE(1..255))read-writecurrent
cyMotd
OBJECT-TYPE
The motd message
1.3.6.1.4.1.2925.4.2.3DisplayString (SIZE(0..255))read-writecurrent
cyEthItf
OBJECT-IDENTITY
The configuration of the Ethernet Interface
1.3.6.1.4.1.2925.4.2.4current
cyEthDhcpc
OBJECT-TYPE
The ACS can request all of its ethernet parameters to a DHCP server
1.3.6.1.4.1.2925.4.2.4.1INTEGER {inactive(0), active(1), restore(2)}read-writecurrent
cyEthIPaddr
OBJECT-TYPE
This is the IP address of the Ethernet Interface
1.3.6.1.4.1.2925.4.2.4.2IpAddressread-writecurrent
cyEthIPmask
OBJECT-TYPE
The mask fot the Ethernet network
1.3.6.1.4.1.2925.4.2.4.3IpAddressread-writecurrent
cyEthMTU
OBJECT-TYPE
The Maximum Transmission Unit size, wich determines whether or not packets should be broken up
1.3.6.1.4.1.2925.4.2.4.4Integer32read-writecurrent
cyEthIPaddr2
OBJECT-TYPE
The Ethernet secondary IP address
1.3.6.1.4.1.2925.4.2.4.5IpAddressread-writecurrent
cyEthIPmask2
OBJECT-TYPE
The Ethernet secondary IP mask
1.3.6.1.4.1.2925.4.2.4.6IpAddressread-writecurrent
cyNameService
OBJECT-IDENTITY
The Name Service configuration
1.3.6.1.4.1.2925.4.2.5current
cyResolverOrder
OBJECT-TYPE
It specifies how host lookups are to be performed. Valid values : empty, 'hosts', 'bind', 'hosts, bind', 'bind, hosts'
1.3.6.1.4.1.2925.4.2.5.1DisplayString (SIZE(0..15))read-writecurrent
cyMultipleIP
OBJECT-TYPE
Valid values are ON or OFF. If set to ON, the resolve library will return all valid addresses for a host that appears in the /etc/hosts file, instead of only the first.
1.3.6.1.4.1.2925.4.2.5.2DisplayString (SIZE(0..3))read-writecurrent
cyDNSserv
OBJECT-IDENTITY
The DNS server configuration
1.3.6.1.4.1.2925.4.2.5.3current
cyDNSpriserv
OBJECT-TYPE
Internet Address (in dot notation) of primary name server that the resolver should query.
1.3.6.1.4.1.2925.4.2.5.3.1IpAddressread-writecurrent
cyDNSsecserv
OBJECT-TYPE
Internet Address (in dot notation) of secondary name server that the resolver should query.
1.3.6.1.4.1.2925.4.2.5.3.2IpAddressread-writecurrent
cyDNSdomain
OBJECT-TYPE
Local domain name .
1.3.6.1.4.1.2925.4.2.5.3.3DisplayString (SIZE(1..40))read-writecurrent
cySerialPortConf
OBJECT-IDENTITY
The PortSlave configuration - pslave.conf file. It configures the all serial ports.
1.3.6.1.4.1.2925.4.2.6current
cySerialGlobal
OBJECT-IDENTITY
These parameters have the prefix conf. in the pslave.conf file
1.3.6.1.4.1.2925.4.2.6.1current
cySerialInclude
OBJECT-TYPE
File used in centralized management.
1.3.6.1.4.1.2925.4.2.6.1.1DisplayString (SIZE(0..40))read-writecurrent
cySerialNFS
OBJECT-TYPE
Remote Network File System where data buffering will be written instead of the default directory '/var/run/DB'.
1.3.6.1.4.1.2925.4.2.6.1.2DisplayString (SIZE(0..50))read-writecurrent
cySerialLockDir
OBJECT-TYPE
The lock directory for the ACS.
1.3.6.1.4.1.2925.4.2.6.1.3DisplayString (SIZE(0..50))read-writecurrent
cySerialRlogin
OBJECT-TYPE
Location of the rlogin binary that accepts the -i flag.
1.3.6.1.4.1.2925.4.2.6.1.4DisplayString (SIZE(0..50))read-writecurrent
cySerialPppd
OBJECT-TYPE
Location of the pppd binary.
1.3.6.1.4.1.2925.4.2.6.1.5DisplayString (SIZE(0..50))read-writecurrent
cySerialTelnet
OBJECT-TYPE
Location of the telnet application
1.3.6.1.4.1.2925.4.2.6.1.6DisplayString (SIZE(0..50))read-writecurrent
cySerialSsh
OBJECT-TYPE
Location of the ssh application
1.3.6.1.4.1.2925.4.2.6.1.7DisplayString (SIZE(0..50))read-writecurrent
cySerialLocalLogins
OBJECT-TYPE
This parameter is only necessary when authentication is being performed for a port. This is useful if the Radius authentication server is down.
1.3.6.1.4.1.2925.4.2.6.1.8INTEGER {off(0), on(1)}read-writecurrent
cySerialFacility
OBJECT-TYPE
This value (0-7) is the Local facility sent to the syslog daemon.
1.3.6.1.4.1.2925.4.2.6.1.9Integer32read-writecurrent
cySerialDBFacility
OBJECT-TYPE
This value (0-7) is the Local facility sent to the syslog daemon with the data when .
1.3.6.1.4.1.2925.4.2.6.1.10Integer32read-writecurrent
cySerialGroupTable
OBJECT-TYPE
This associates group name and its users
1.3.6.1.4.1.2925.4.2.6.1.11not-accessiblecurrent
cygroupEntry
OBJECT-TYPE
One particular association between group name and its users
1.3.6.1.4.1.2925.4.2.6.1.11.1not-accessiblecurrent
cyGroupIndex
OBJECT-TYPE
number to identifier the group
1.3.6.1.4.1.2925.4.2.6.1.11.1.1InterfaceIndexOrZeroread-onlycurrent
cyGroupName
OBJECT-TYPE
The Group Name
1.3.6.1.4.1.2925.4.2.6.1.11.1.2DisplayString (SIZE(0..20))read-writecurrent
cyGroupUsers
OBJECT-TYPE
The users names
1.3.6.1.4.1.2925.4.2.6.1.11.1.3DisplayString (SIZE(0..80))read-writecurrent
cySerialSpec
OBJECT-IDENTITY
These parameters have the prefix all. or sxx. in the pslave.conf file
1.3.6.1.4.1.2925.4.2.6.2current
cySerialPortTable
OBJECT-TYPE
This is the specific configuration to serial port
1.3.6.1.4.1.2925.4.2.6.2.1not-accessiblecurrent
cysportEntry
OBJECT-TYPE
One particular serial port configuration
1.3.6.1.4.1.2925.4.2.6.2.1.1not-accessiblecurrent
cySPortNumber
OBJECT-TYPE
number to identifier the serial port. Value 0 is ALL.
1.3.6.1.4.1.2925.4.2.6.2.1.1.1InterfaceIndexOrZeroread-onlycurrent
cySPortTty
OBJECT-TYPE
The device name for the serial port.
1.3.6.1.4.1.2925.4.2.6.2.1.1.2DisplayString (SIZE(0..25))read-writecurrent
cySPortName
OBJECT-TYPE
Alias name given to the server connected to the serial port.
1.3.6.1.4.1.2925.4.2.6.2.1.1.3DisplayString (SIZE(0..40))read-writecurrent
cySPortSpeed
OBJECT-TYPE
The speed for serial port.
1.3.6.1.4.1.2925.4.2.6.2.1.1.4INTEGER {s50bps(50), s75bps(75), s110bps(110), s134bps(134), s150bps(150), s200bps(200), s300bps(300), s600bps(600), s1200bps(1200), s1800bps(1800), s2400bps(2400), s4800bps(4800), s9600bps(9600), s14400bps(14400), s19200bps(19200), s28800bps(28800), s38400bps(38400), s57600bps(57600), s115200bps(115200), s230400bps(230400), s460800bps(460800)}read-writecurrent
cySPortDataSize
OBJECT-TYPE
The data size for serial port.
1.3.6.1.4.1.2925.4.2.6.2.1.1.5Integer32 (4..8)read-writecurrent
cySPortStopBits
OBJECT-TYPE
The number of stop bits for serial port.
1.3.6.1.4.1.2925.4.2.6.2.1.1.6Integer32 (1..2)read-writecurrent
cySPortParity
OBJECT-TYPE
The parity for serial port.
1.3.6.1.4.1.2925.4.2.6.2.1.1.7DisplayString (SIZE(0..5))read-writecurrent
cySPortFlowCtrl
OBJECT-TYPE
The flow control for serial port.
1.3.6.1.4.1.2925.4.2.6.2.1.1.8DisplayString (SIZE(0..5))read-writecurrent
cySPortDTRdelay
OBJECT-TYPE
This specifies how long (in miliseconds) a DTR signal will be turned off before it is turned on again.
1.3.6.1.4.1.2925.4.2.6.2.1.1.9Integer32read-writecurrent
cySPortDCDCtrl
OBJECT-TYPE
DCD signal controls the connection request.
1.3.6.1.4.1.2925.4.2.6.2.1.1.10INTEGER {notctrl(0), control(1)}read-writecurrent
cySPortLogUtmp
OBJECT-TYPE
ACS update the login records in /var/run/utmp file.
1.3.6.1.4.1.2925.4.2.6.2.1.1.11INTEGER {inactive(0), active(1)}read-writecurrent
cySPortLogWtmp
OBJECT-TYPE
ACS update the login records in /var/run/wtmp file.
1.3.6.1.4.1.2925.4.2.6.2.1.1.12INTEGER {inactive(0), active(1)}read-writecurrent
cySPortLogform
OBJECT-TYPE
This is the format to write login record.
1.3.6.1.4.1.2925.4.2.6.2.1.1.13DisplayString (SIZE(0..40))read-writecurrent
cySPortAuthtype
OBJECT-TYPE
Authentication type : .
1.3.6.1.4.1.2925.4.2.6.2.1.1.14DisplayString (SIZE(0..25))read-writecurrent
cySPortAuthSrv1
OBJECT-TYPE
IP address of the primary authentication server.
1.3.6.1.4.1.2925.4.2.6.2.1.1.15IpAddressread-writecurrent
cySPortAccSrv1
OBJECT-TYPE
IP address of the primary accounting server.
1.3.6.1.4.1.2925.4.2.6.2.1.1.16IpAddressread-writecurrent
cySPortAuthTmo
OBJECT-TYPE
This is the timeout (in seconds) for authentication query to be answered.
1.3.6.1.4.1.2925.4.2.6.2.1.1.17Integer32read-writecurrent
cySPortAuthRetr
OBJECT-TYPE
This defines the number of times each server is tried before another is contacted.
1.3.6.1.4.1.2925.4.2.6.2.1.1.18Integer32read-writecurrent
cySPortAuthSrv2
OBJECT-TYPE
IP address of the secondary authentication server.
1.3.6.1.4.1.2925.4.2.6.2.1.1.19IpAddressread-writecurrent
cySPortAccSrv2
OBJECT-TYPE
IP address of the secondary accounting server.
1.3.6.1.4.1.2925.4.2.6.2.1.1.20IpAddressread-writecurrent
cySPortAuthSecret
OBJECT-TYPE
This is the shared secret with authentciation servers.
1.3.6.1.4.1.2925.4.2.6.2.1.1.21DisplayString (SIZE(0..40))read-writecurrent
cySPortAuthRadP
OBJECT-TYPE
To accept Radius' user without password.
1.3.6.1.4.1.2925.4.2.6.2.1.1.22INTEGER {inactive(0), active(1)}read-writecurrent
cySPortAuthAcc
OBJECT-TYPE
access restrition on Users.
1.3.6.1.4.1.2925.4.2.6.2.1.1.23DisplayString (SIZE(0..40))read-writecurrent
cySPortProtocol
OBJECT-TYPE
Defines the port serial's protocol.
1.3.6.1.4.1.2925.4.2.6.2.1.1.24DisplayString (SIZE(0..40))read-writecurrent
cySPortRemoteIP
OBJECT-TYPE
This is the default IP address of the serial port.
1.3.6.1.4.1.2925.4.2.6.2.1.1.25DisplayString (SIZE(0..20))read-writecurrent
cySPortSocketPort
OBJECT-TYPE
This defines an alternative labeling system for the serial port.
1.3.6.1.4.1.2925.4.2.6.2.1.1.26DisplayString (SIZE(0..10))read-writecurrent
cySPortRemHost
OBJECT-TYPE
The IP address of the host to which the serial port will connect.
1.3.6.1.4.1.2925.4.2.6.2.1.1.27IpAddressread-writecurrent
cySPortBanner
OBJECT-TYPE
This defines the banner.
1.3.6.1.4.1.2925.4.2.6.2.1.1.28DisplayString (SIZE(0..250))read-writecurrent
cySPortPrompt
OBJECT-TYPE
This defines the login prompt to the serial port.
1.3.6.1.4.1.2925.4.2.6.2.1.1.29DisplayString (SIZE(0..250))read-writecurrent
cySPortTermType
OBJECT-TYPE
This defines the terminal type.
1.3.6.1.4.1.2925.4.2.6.2.1.1.30DisplayString (SIZE(0..20))read-writecurrent
cySPortAutomUsr
OBJECT-TYPE
This defines the automatic user.
1.3.6.1.4.1.2925.4.2.6.2.1.1.31DisplayString (SIZE(0..40))read-writecurrent
cySPortNetMask
OBJECT-TYPE
The network mask used in dial in connection.
1.3.6.1.4.1.2925.4.2.6.2.1.1.32IpAddressread-writecurrent
cySPortPppMtu
OBJECT-TYPE
The PPP MTU - dial in connection.
1.3.6.1.4.1.2925.4.2.6.2.1.1.33Integer32read-writecurrent
cySPortPppMru
OBJECT-TYPE
The PPP MRU - dial in connection.
1.3.6.1.4.1.2925.4.2.6.2.1.1.34Integer32read-writecurrent
cySPortPppOptions
OBJECT-TYPE
The PPP options when ACS autodetects the PPP session .
1.3.6.1.4.1.2925.4.2.6.2.1.1.35DisplayStringread-writecurrent
cySPortPppFoption
OBJECT-TYPE
The PPP forced options when the user has already been authenticated.
1.3.6.1.4.1.2925.4.2.6.2.1.1.36DisplayStringread-writecurrent
cySPortModemChat
OBJECT-TYPE
The initchat send to modem connected.
1.3.6.1.4.1.2925.4.2.6.2.1.1.37DisplayStringread-writecurrent
cySPortSttyCmd
OBJECT-TYPE
the tty settings after socket connection is established.
1.3.6.1.4.1.2925.4.2.6.2.1.1.38DisplayString (SIZE(0..180))read-writecurrent
cySPortSockTx
OBJECT-TYPE
Defines the delay (in miliseconds) before transmission to the Ethernet of data received through a serial port .
1.3.6.1.4.1.2925.4.2.6.2.1.1.39Integer32read-writecurrent
cySPortSockPoll
OBJECT-TYPE
Keep-alive timer (miliseconds) to the TCP connection .
1.3.6.1.4.1.2925.4.2.6.2.1.1.40Integer32read-writecurrent
cySPortSockIdle
OBJECT-TYPE
The idle timeout in seconds .
1.3.6.1.4.1.2925.4.2.6.2.1.1.41Integer32read-writecurrent
cySPortDBsize
OBJECT-TYPE
Maximum size of the data buffering file.
1.3.6.1.4.1.2925.4.2.6.2.1.1.42Integer32read-writecurrent
cySPortDBtime
OBJECT-TYPE
Timestamp in data buffering.
1.3.6.1.4.1.2925.4.2.6.2.1.1.43INTEGER {inactive(0), active(1)}read-writecurrent
cySPortDBmode
OBJECT-TYPE
Data buffering mode : circ or line
1.3.6.1.4.1.2925.4.2.6.2.1.1.44DisplayString (SIZE(0..5))read-writecurrent
cySPortDBsyslog
OBJECT-TYPE
size of the data buffering send to syslog.
1.3.6.1.4.1.2925.4.2.6.2.1.1.45Integer32read-writecurrent
cySPortDBmenu
OBJECT-TYPE
Menu of the data buffering.
1.3.6.1.4.1.2925.4.2.6.2.1.1.46INTEGER {displayMenu(0), inactive(1), displayDB(2), displayParc(3)}read-writecurrent
cySPortDBalarm
OBJECT-TYPE
Generating Alarms.
1.3.6.1.4.1.2925.4.2.6.2.1.1.47INTEGER {inactive(0), active(1)}read-writecurrent
cySPortSSHbreak
OBJECT-TYPE
Break sequence - ssh session
1.3.6.1.4.1.2925.4.2.6.2.1.1.48DisplayString (SIZE(0..16))read-writecurrent
cySPortSniffSess
OBJECT-TYPE
Sniff session type
1.3.6.1.4.1.2925.4.2.6.2.1.1.49DisplayString (SIZE(0..5))read-writecurrent
cySPortSniffAdm
OBJECT-TYPE
List of admin users to sniff session
1.3.6.1.4.1.2925.4.2.6.2.1.1.50DisplayString (SIZE(0..40))read-writecurrent
cySPortSniffEsc
OBJECT-TYPE
Escape sequence used in sniff session
1.3.6.1.4.1.2925.4.2.6.2.1.1.51DisplayString (SIZE(0..6))read-writecurrent
cySPortSniffMsess
OBJECT-TYPE
Multiple sniff sessions
1.3.6.1.4.1.2925.4.2.6.2.1.1.52DisplayString (SIZE(0..20))read-writecurrent
cySPortTelnetMode
OBJECT-TYPE
Mode negotiated by client telnet with the server
1.3.6.1.4.1.2925.4.2.6.2.1.1.53INTEGER {text(0), binary(1)}read-writecurrent
cySPortSysBufSess
OBJECT-TYPE
Syslog Buffering at all times
1.3.6.1.4.1.2925.4.2.6.2.1.1.54INTEGER {yes(0), no(1)}read-writecurrent
cySPortLFSuppress
OBJECT-TYPE
LF suppression in socket_server session
1.3.6.1.4.1.2925.4.2.6.2.1.1.55INTEGER {inactive(0), active(1)}read-writecurrent
cySPortAutoInput
OBJECT-TYPE
This string is used to auto answer. It's the input string
1.3.6.1.4.1.2925.4.2.6.2.1.1.56DisplayString (SIZE(0..40))read-writecurrent
cySPortAutoOutput
OBJECT-TYPE
This string is used to auto answer. It's the output string
1.3.6.1.4.1.2925.4.2.6.2.1.1.57DisplayString (SIZE(0..40))read-writecurrent
cySPortPmType
OBJECT-TYPE
IPDU type, when the port protocol is configured as IPDU
1.3.6.1.4.1.2925.4.2.6.2.1.1.58DisplayString (SIZE(0..20))read-writecurrent
cySPortPmUsers
OBJECT-TYPE
List of users which can access the IPDU and their respective outlets
1.3.6.1.4.1.2925.4.2.6.2.1.1.59DisplayString (SIZE(0..40))read-writecurrent
cySPortPmOutlet
OBJECT-TYPE
List of <IPDU port>.<outlet> pairs, where the server is connected
1.3.6.1.4.1.2925.4.2.6.2.1.1.60DisplayString (SIZE(0..40))read-writecurrent
cySPortPmKey
OBJECT-TYPE
Hotkey to grant access to the Power Management from a Telnet/SSH session
1.3.6.1.4.1.2925.4.2.6.2.1.1.61DisplayString (SIZE(0..8))read-writecurrent
cySPortPmNOutlets
OBJECT-TYPE
Number of outlets of the IPDU
1.3.6.1.4.1.2925.4.2.6.2.1.1.62Integer32read-writecurrent
cySPortBreakInterval
OBJECT-TYPE
The break interval in miliseconds.
1.3.6.1.4.1.2925.4.2.6.2.1.1.63Integer32read-writecurrent