CTRON-SFPS-VLAN-MIB
- Registered at
- 1.3.6.1.4.1.52.4.2.12.1.1.11.3.6.1.4.1.52.4.2.12.1.1.21.3.6.1.4.1.52.4.2.12.1.1.31.3.6.1.4.1.52.4.2.12.1.1.41.3.6.1.4.1.52.4.2.12.1.1.51.3.6.1.4.1.52.4.2.12.1.1.61.3.6.1.4.1.52.4.2.12.1.1.71.3.6.1.4.1.52.4.2.12.1.1.81.3.6.1.4.1.52.4.2.12.1.1.91.3.6.1.4.1.52.4.2.12.1.1.101.3.6.1.4.1.52.4.2.12.1.1.111.3.6.1.4.1.52.4.2.12.1.1.121.3.6.1.4.1.52.4.2.12.1.1.131.3.6.1.4.1.52.4.2.12.1.1.141.3.6.1.4.1.52.4.2.12.1.1.151.3.6.1.4.1.52.4.2.12.1.1.161.3.6.1.4.1.52.4.2.12.1.1.171.3.6.1.4.1.52.4.2.12.1.1.181.3.6.1.4.1.52.4.2.12.1.1.191.3.6.1.4.1.52.4.2.12.1.2.1.11.3.6.1.4.1.52.4.2.12.1.2.5.11.3.6.1.4.1.52.4.2.12.1.2.6.11.3.6.1.4.1.52.4.2.12.1.2.9.11.3.6.1.4.1.52.4.2.12.1.2.9.21.3.6.1.4.1.52.4.2.12.1.2.9.31.3.6.1.4.1.52.4.2.12.1.2.9.41.3.6.1.4.1.52.4.2.12.1.2.9.51.3.6.1.4.1.52.4.2.12.1.2.10.1.11.3.6.1.4.1.52.4.2.12.1.2.10.1.21.3.6.1.4.1.52.4.2.12.1.2.10.1.31.3.6.1.4.1.52.4.2.12.3.6.11.3.6.1.4.1.52.4.2.12.3.7.11.3.6.1.4.1.52.4.2.12.3.7.21.3.6.1.4.1.52.4.2.12.3.8.11.3.6.1.4.1.52.4.2.12.3.8.2
- Namespace
- enterasys
- Source file
CTRON-SFPS-VLAN-MIB- Digest
sha256:b78707a0610856024a3671455259d40288e8760aceda1a5927f96475199ce939
Imports
| From | Symbols |
|---|---|
| CTRON-SFPS-INCLUDE-MIB | vlanAMRRules, vlanAMRStats, vlanAMRSubnets, vlanAPI, vlanCountAPI, vlanName, vlanPort, vlanSystem, vlanTestAPI |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CTRON-SFPS-INCLUDE-MIB CTRON-SFPS-VLAN-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| HexInteger type | ||||
| SfpsAddress type | ||||
| SfpsSwitchPort type | ||||
| VlanSwitchInstance type |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| sfpsVAPIVerb OBJECT-TYPE Specifies the action to be initiated as a result of setting this leaf. | 1.3.6.1.4.1.52.4.2.12.1.1.1 | INTEGER {other(1), add-vlan(2), delete-vlan(3), enable-vlan(4), disable-vlan(5), map-port(6), unmap-port(7), enable-port(8), disable-port(9), map-user(10), unmap-user(11), tap-vlan(12), untap-vlan(13), auto-register(14), auto-unregister(15)} | read-write | mandatory |
| sfpsVAPIInPort OBJECT-TYPE Specifies the ingress port of the Virtual LAN if mapping a connection. Specifies the source port of a user when mapping a user | 1.3.6.1.4.1.52.4.2.12.1.1.2 | SfpsSwitchPort | read-write | mandatory |
| sfpsVAPIVlanName OBJECT-TYPE Specifies the Virtual LAN ID. | 1.3.6.1.4.1.52.4.2.12.1.1.3 | DisplayString | read-write | mandatory |
| sfpsVAPIOutPort OBJECT-TYPE Specifies the egress port of the Virtual LAN if mapping a connection. | 1.3.6.1.4.1.52.4.2.12.1.1.4 | SfpsSwitchPort | read-write | mandatory |
| sfpsVAPIUserMAC OBJECT-TYPE Specifies the actual user's MAC value for the action. | 1.3.6.1.4.1.52.4.2.12.1.1.5 | SfpsAddress | read-write | mandatory |
| sfpsVAPIUserAliasTag OBJECT-TYPE Indicates the Alias Value of the user. Not yet supported. | 1.3.6.1.4.1.52.4.2.12.1.1.6 | INTEGER {aoMacDx(1), aoIpxSap(2), aoIpxRIP(3), aoInetYP(4), aoInetUDP(5), aoIpxIpx(6), aoInetIP(7), aoInetRPC(8), aoInetRIP(9), aoMacDXMcast(10), aoAtDDP(11), aoEmpty(12), aoVlan(13), aoHostName(14), aoNetBiosName(15), aoInetIPMask(16)} | read-write | mandatory |
| sfpsVAPIUserAlias OBJECT-TYPE Indicates the Alias Value of the user. | 1.3.6.1.4.1.52.4.2.12.1.1.7 | DisplayString | read-write | mandatory |
| sfpsVAPIAdminStatus OBJECT-TYPE Sets the administrative state of the object. | 1.3.6.1.4.1.52.4.2.12.1.1.8 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| sfpsVAPIAutoRegisterRule OBJECT-TYPE Specifies the AMR rule in which to perform the action on. | 1.3.6.1.4.1.52.4.2.12.1.1.9 | INTEGER {other(1), ether-type(2), ip-subnet(3), netBIOS(4), ipx-Server(5), appleTalk(6), decNET(7), vines(8), bpdu(9)} | read-write | mandatory |
| sfpsVAPIAutoRegMask OBJECT-TYPE Indicates the mask to apply when the IP-Subnet rule is invoked. | 1.3.6.1.4.1.52.4.2.12.1.1.10 | IpAddress | read-write | mandatory |
| sfpsVAPIAutoRegValue OBJECT-TYPE Indicates the Alias Value of the user. | 1.3.6.1.4.1.52.4.2.12.1.1.11 | IpAddress | read-write | mandatory |
| sfpsVAPIUnicastPolicy OBJECT-TYPE Sets the vlan policy type. | 1.3.6.1.4.1.52.4.2.12.1.1.12 | INTEGER {other(1), open(2), secure(3)} | read-write | mandatory |
| sfpsVAPIPortPolicy OBJECT-TYPE Sets the port mode type. | 1.3.6.1.4.1.52.4.2.12.1.1.13 | INTEGER {other(1), normal(2), locked(3)} | read-write | mandatory |
| sfpsVAPIFloodPolicy OBJECT-TYPE Sets the flood mode type. | 1.3.6.1.4.1.52.4.2.12.1.1.14 | INTEGER {other(1), flooding-on(2), flooding-off(3)} | read-write | mandatory |
| sfpsVAPIRouterPort OBJECT-TYPE Sets router port | 1.3.6.1.4.1.52.4.2.12.1.1.15 | INTEGER {other(1), router-port(2), no-router(3)} | read-write | mandatory |
| sfpsVAPIVlanId OBJECT-TYPE Indicates the Vlan Id. | 1.3.6.1.4.1.52.4.2.12.1.1.16 | INTEGER | read-write | mandatory |
| sfpsVAPINvramId OBJECT-TYPE Indicates the Nvram Id | 1.3.6.1.4.1.52.4.2.12.1.1.17 | INTEGER | read-write | mandatory |
| sfpsVAPIRelayAgent OBJECT-TYPE Indicates the Relay Agent. | 1.3.6.1.4.1.52.4.2.12.1.1.18 | IpAddress | read-write | mandatory |
| sfpsVAPILayer3Learning OBJECT-TYPE Indicates layer 3 learning enabled/disabled | 1.3.6.1.4.1.52.4.2.12.1.1.19 | INTEGER {other(1), learning-enabled(2), learning-disabled(3)} | read-write | mandatory |
| vlanNameTable OBJECT-TYPE This table contains information of each SFVlan instance. Essentially, a separate SFVlan instance exists for each Vlan. If SFVlan is not configured on a module, than an entry will not exist. | 1.3.6.1.4.1.52.4.2.12.1.2.1.1 | not-accessible | mandatory | |
| vlanNameEntry OBJECT-TYPE Each entry specifies the configuration for the Vlan instance. | 1.3.6.1.4.1.52.4.2.12.1.2.1.1.1 | not-accessible | mandatory | |
| vlanNameNHash OBJECT-TYPE The primary index to the VlanName table. | 1.3.6.1.4.1.52.4.2.12.1.2.1.1.1.1 | HexInteger | read-only | mandatory |
| vlanNameIndex OBJECT-TYPE The secondary index to the VlanName table. | 1.3.6.1.4.1.52.4.2.12.1.2.1.1.1.2 | INTEGER | read-only | mandatory |
| vlanNameVlanName OBJECT-TYPE The Virual LAN ID. | 1.3.6.1.4.1.52.4.2.12.1.2.1.1.1.3 | DisplayString | read-only | mandatory |
| vlanNameAdminStatus OBJECT-TYPE The administrative state of the Vlan. | 1.3.6.1.4.1.52.4.2.12.1.2.1.1.1.4 | INTEGER {other(1), disabled(2), enabled(3)} | read-only | mandatory |
| vlanNameOperStatus OBJECT-TYPE The operational state of the Vlan. | 1.3.6.1.4.1.52.4.2.12.1.2.1.1.1.5 | INTEGER {other(1), disabled(2), enabled(3), shutdown-pending(4), startup-pending(5), invalid-config(6), testing(7)} | read-only | mandatory |
| vlanNameUniPolicy OBJECT-TYPE The communication policy with respect to other Vlans. | 1.3.6.1.4.1.52.4.2.12.1.2.1.1.1.6 | INTEGER {other(1), open(2), secure(3)} | read-only | mandatory |
| vlanNameFloodPolicy OBJECT-TYPE The multicast and unknown destination flood policy. | 1.3.6.1.4.1.52.4.2.12.1.2.1.1.1.7 | INTEGER {other(1), flood-off(2), flood-on(3)} | read-only | mandatory |
| vlanNameStatusTime OBJECT-TYPE The amount of time that this Vlan has been in its current operational state. | 1.3.6.1.4.1.52.4.2.12.1.2.1.1.1.8 | TimeTicks | read-only | mandatory |
| vlanNameNumUsers OBJECT-TYPE The number of users per port | 1.3.6.1.4.1.52.4.2.12.1.2.1.1.1.9 | DisplayString | read-only | mandatory |
| vlanNameEnabledPorts OBJECT-TYPE The list of ports which have are enabled for this Vlan. | 1.3.6.1.4.1.52.4.2.12.1.2.1.1.1.10 | DisplayString | read-only | mandatory |
| vlanNameMappedPorts OBJECT-TYPE The list of ports which have this Vlan mapped to it. | 1.3.6.1.4.1.52.4.2.12.1.2.1.1.1.11 | DisplayString | read-only | mandatory |
| vlanNameVlanRule OBJECT-TYPE . | 1.3.6.1.4.1.52.4.2.12.1.2.1.1.1.12 | INTEGER | read-only | mandatory |
| vlanNameFloodPorts OBJECT-TYPE | 1.3.6.1.4.1.52.4.2.12.1.2.1.1.1.13 | DisplayString | read-only | mandatory |
| vlanNameVlanId OBJECT-TYPE | 1.3.6.1.4.1.52.4.2.12.1.2.1.1.1.14 | INTEGER | read-only | mandatory |
| vlanNameRelayAgent OBJECT-TYPE | 1.3.6.1.4.1.52.4.2.12.1.2.1.1.1.15 | IpAddress | read-only | mandatory |
| vlanSystemTable OBJECT-TYPE This table contains the configuration and administrative information of each SFVlan switch instance. Essentially, a separate SFVlan switch instance exists for each switch module. If SFVlan is not configured on a module, than an entry will not exist. | 1.3.6.1.4.1.52.4.2.12.1.2.5.1 | not-accessible | mandatory | |
| vlanSystemEntry OBJECT-TYPE Each entry specifies the VLAN configuration for the VLAN instance. | 1.3.6.1.4.1.52.4.2.12.1.2.5.1.1 | not-accessible | mandatory | |
| vlanSystemSwitchInstance OBJECT-TYPE The primary index to the VLAN switch table. This identifies the VLAN switch for which the entry exists. | 1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.1 | VlanSwitchInstance | read-only | mandatory |
| vlanSystemAdminStatus OBJECT-TYPE Sets the administrative state of the VLAN switching services for this VLAN instance. This controls the VLAN state at a module level. Regardless of the per-port state of each VLAN switching port and the state of active connections, writing the value disabled(2) will cause the VLAN to immediately shutdown. A gracefull shutdown will be attempted. | 1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.2 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| vlanSystemAdminReset OBJECT-TYPE Resets this VLAN switch instance. Writing a vlue of reset(2) will force a soft restart of the VLAN without any graceful shutdown. Any active connections or services will be interrupted. | 1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.3 | INTEGER {other(1), reset(2)} | read-write | mandatory |
| vlanSystemOperStatus OBJECT-TYPE Indicates the current operating condition of the VLAN instance. | 1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.4 | INTEGER {other(1), disabled(2), enabled(3), pending-disable(4), pending-enable(5), invalid-config(6)} | read-only | mandatory |
| vlanSystemOperTime OBJECT-TYPE Indicates the amount of time (# of time ticks) that this VLAN switch instance has been in its current operational state. | 1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.5 | TimeTicks | read-only | mandatory |
| vlanSystemLastChange OBJECT-TYPE Indicates the last time a change was made to the configuration entry for this VLAN switch instance. | 1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.6 | TimeTicks | read-only | mandatory |
| vlanSystemVersion OBJECT-TYPE Indicates the current revision level of the VLAN firmware for this VLAN switch instance. | 1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.7 | DisplayString | read-only | mandatory |
| vlanSystemMibRev OBJECT-TYPE Indicates in textual format the current revision level of the Cabletron VLAN MIB implemeted by the agent for this VLAN switch instance. | 1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.8 | DisplayString | read-only | mandatory |
| vlanSystemAgentIP OBJECT-TYPE IP Address of VLAN Manager who owns this switch. | 1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.9 | IpAddress | read-write | mandatory |
| vlanSystemDomainName OBJECT-TYPE Indicates domain name | 1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.10 | DisplayString | read-write | mandatory |
| vlanSystemPollCount OBJECT-TYPE Number of polls | 1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.11 | INTEGER | read-only | mandatory |
| vlanSystemFirstPollTime OBJECT-TYPE System time when first polled | 1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.12 | TimeTicks | read-only | mandatory |
| vlanSystemLastPollTime OBJECT-TYPE Last time polled | 1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.13 | TimeTicks | read-only | mandatory |
| vlanSystemPriorPollTime OBJECT-TYPE Poll time one before the last poll time | 1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.14 | TimeTicks | read-only | mandatory |
| vlanSystemDeltaPollTime OBJECT-TYPE Time difference between last poll time and prior poll time | 1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.15 | TimeTicks | read-only | mandatory |
| vlanPortTable OBJECT-TYPE | 1.3.6.1.4.1.52.4.2.12.1.2.6.1 | not-accessible | mandatory | |
| vlanPortEntry OBJECT-TYPE | 1.3.6.1.4.1.52.4.2.12.1.2.6.1.1 | not-accessible | mandatory | |
| vlanPortPortNum OBJECT-TYPE The primary index to the VlanPort table. | 1.3.6.1.4.1.52.4.2.12.1.2.6.1.1.1 | INTEGER | read-only | mandatory |
| vlanPortPortStatus OBJECT-TYPE | 1.3.6.1.4.1.52.4.2.12.1.2.6.1.1.2 | INTEGER {other(1), disabled(2), enabled(3)} | read-only | mandatory |
| vlanPortPortPolicy OBJECT-TYPE | 1.3.6.1.4.1.52.4.2.12.1.2.6.1.1.3 | INTEGER {other(1), normal(2), locked(3)} | read-only | mandatory |
| vlanPortVlanName OBJECT-TYPE | 1.3.6.1.4.1.52.4.2.12.1.2.6.1.1.4 | DisplayString | read-only | mandatory |
| vlanPortAdminStatus OBJECT-TYPE | 1.3.6.1.4.1.52.4.2.12.1.2.6.1.1.5 | INTEGER {other(1), disabled(2), enabled(3)} | read-only | mandatory |
| vlanPortUniPolicy OBJECT-TYPE | 1.3.6.1.4.1.52.4.2.12.1.2.6.1.1.6 | INTEGER {other(1), open(2), secure(3)} | read-only | mandatory |
| vlanPortFloodPolicy OBJECT-TYPE | 1.3.6.1.4.1.52.4.2.12.1.2.6.1.1.7 | INTEGER {other(1), floodOn(2), floodOff(3)} | read-only | mandatory |
| vlanPortRouterPort OBJECT-TYPE | 1.3.6.1.4.1.52.4.2.12.1.2.6.1.1.8 | INTEGER {other(1), routerPort(2), noRouter(3)} | read-only | mandatory |
| vlanPortVlanId OBJECT-TYPE | 1.3.6.1.4.1.52.4.2.12.1.2.6.1.1.9 | INTEGER | read-only | mandatory |
| vlanPortRelayAgent OBJECT-TYPE | 1.3.6.1.4.1.52.4.2.12.1.2.6.1.1.10 | IpAddress | read-only | mandatory |
| vlanPortLayer3Learning OBJECT-TYPE | 1.3.6.1.4.1.52.4.2.12.1.2.6.1.1.11 | INTEGER {other(1), enabled(2), disabed(3)} | read-only | mandatory |
| vlanTestAPIVerb OBJECT-TYPE Specifies the action to be initiated as a result of setting this leaf. | 1.3.6.1.4.1.52.4.2.12.1.2.9.1 | INTEGER {other(1), add-vlan(2), delete-vlan(3), enable-vlan(4), disable-vlan(5), open-vlan(6), secure-vlan(7), enable-vlan-port(8), disable-vlan-port(9), map-vlan-port(10), unmap-vlan-port(11), tap-vlan-port(12), untap-vlan-port(13), get-vlan-info(14), get-port-info(15), fill-table(16), empty-table(17)} | read-write | mandatory |
| vlanTestAPIVlanName OBJECT-TYPE Specifies the Virtual LAN to be acted upon. | 1.3.6.1.4.1.52.4.2.12.1.2.9.2 | DisplayString | read-write | mandatory |
| vlanTestAPIPort OBJECT-TYPE Specifies the Port to be acted upon. | 1.3.6.1.4.1.52.4.2.12.1.2.9.3 | INTEGER | read-write | mandatory |
| vlanTestAPIOutputTable OBJECT-TYPE This table contains the output results of the VlanAPI action. | 1.3.6.1.4.1.52.4.2.12.1.2.9.4 | not-accessible | mandatory | |
| vlanTestAPIOutputEntry OBJECT-TYPE Each entry specifies one output result of the VlanAPI action. | 1.3.6.1.4.1.52.4.2.12.1.2.9.4.1 | not-accessible | mandatory | |
| vlanTestAPIOutputIndex OBJECT-TYPE The primary index to the VLAN Test API Output table. | 1.3.6.1.4.1.52.4.2.12.1.2.9.4.1.1 | INTEGER | read-only | mandatory |
| vlanTestAPIOutputVlanName OBJECT-TYPE Specifies the Virtual LAN by name. | 1.3.6.1.4.1.52.4.2.12.1.2.9.4.1.2 | DisplayString | read-only | mandatory |
| vlanTestAPIOutputUserCnt OBJECT-TYPE Specifies the number of users on this Vlan. | 1.3.6.1.4.1.52.4.2.12.1.2.9.4.1.3 | INTEGER | read-only | mandatory |
| vlanTestAPIOutputStatus OBJECT-TYPE Specifies the operational state of this Vlan. | 1.3.6.1.4.1.52.4.2.12.1.2.9.4.1.4 | INTEGER {other(1), disabled(2), enabled(3)} | read-only | mandatory |
| vlanTestAPIOutputPolicy OBJECT-TYPE Specifies the uni-cast policy of this Vlan. | 1.3.6.1.4.1.52.4.2.12.1.2.9.4.1.5 | INTEGER {other(1), normal(2), secure(3)} | read-only | mandatory |
| vlanTestAPIOutputPort OBJECT-TYPE Specifies the Vlan port. | 1.3.6.1.4.1.52.4.2.12.1.2.9.4.1.6 | INTEGER | read-only | mandatory |
| vlanTestAPIOutputMap OBJECT-TYPE Specifies whether the Vlan is mapped. | 1.3.6.1.4.1.52.4.2.12.1.2.9.4.1.7 | INTEGER {other(1), unmapped(2), mapped(3)} | read-only | mandatory |
| vlanTestAPIOutputAble OBJECT-TYPE Specifies whether the Vlan is enabled. | 1.3.6.1.4.1.52.4.2.12.1.2.9.4.1.8 | INTEGER {other(1), disabled(2), enabled(3)} | read-only | mandatory |
| vlanTestAPIOutputTap OBJECT-TYPE Specifies whether the Vlan is tapped. | 1.3.6.1.4.1.52.4.2.12.1.2.9.4.1.9 | INTEGER {other(1), untapped(2), tapped(3)} | read-only | mandatory |
| vlanTestAPIOutputVlanId OBJECT-TYPE Specifies the Vlan Id. | 1.3.6.1.4.1.52.4.2.12.1.2.9.4.1.10 | INTEGER | read-only | mandatory |
| vlanTestAPIVlanId OBJECT-TYPE Specifies the ID. | 1.3.6.1.4.1.52.4.2.12.1.2.9.5 | INTEGER | read-write | mandatory |
| vlanCountAPITotal OBJECT-TYPE | 1.3.6.1.4.1.52.4.2.12.1.2.10.1.1 | INTEGER | read-only | mandatory |
| vlanCountAPIAdmin OBJECT-TYPE | 1.3.6.1.4.1.52.4.2.12.1.2.10.1.2 | INTEGER | read-only | mandatory |
| vlanCountAPIAutoreg OBJECT-TYPE | 1.3.6.1.4.1.52.4.2.12.1.2.10.1.3 | INTEGER | read-only | mandatory |
| vlanAMRRulesTable OBJECT-TYPE This table displays the on/off status of each individual AMR Rule. | 1.3.6.1.4.1.52.4.2.12.3.6.1 | not-accessible | mandatory | |
| vlanAMRRulesEntry OBJECT-TYPE | 1.3.6.1.4.1.52.4.2.12.3.6.1.1 | not-accessible | mandatory | |
| vlanAMRRulesRule OBJECT-TYPE Refers to the enumerated value corresponding to each AMR rule | 1.3.6.1.4.1.52.4.2.12.3.6.1.1.1 | INTEGER {other(1), etherType(2), ipSubNet(3), netBIOS(4), ipxServer(5), appleTalk(6), decNET(7), vines(8), bpdu(9)} | read-only | mandatory |
| vlanAMRRulesStatus OBJECT-TYPE Displays whether the rule is currently on or off | 1.3.6.1.4.1.52.4.2.12.3.6.1.1.2 | INTEGER {on(1)} | read-only | mandatory |
| vlanAMRSubnetsPrefix OBJECT-TYPE | 1.3.6.1.4.1.52.4.2.12.3.7.1 | IpAddress | read-only | mandatory |
| vlanAMRSubnetsMask OBJECT-TYPE | 1.3.6.1.4.1.52.4.2.12.3.7.2 | IpAddress | read-only | mandatory |
| vlanAMRStatsNumRulesEnabled OBJECT-TYPE Refers to the number of rules that are on in the AmrRules | 1.3.6.1.4.1.52.4.2.12.3.8.1 | INTEGER | read-only | mandatory |
| vlanAMRStatsSingleMask OBJECT-TYPE Displays the mask that is used with the IP-Subnet AMR rule | 1.3.6.1.4.1.52.4.2.12.3.8.2 | IpAddress | read-only | mandatory |