CTRON-SFPS-PORT-MIB
- Registered at
- 1.3.6.1.4.1.52.4.2.4.2.1.2.1.11.3.6.1.4.1.52.4.2.4.2.1.2.1.21.3.6.1.4.1.52.4.2.4.2.1.2.1.9.1.11.3.6.1.4.1.52.4.2.4.2.1.2.1.9.1.21.3.6.1.4.1.52.4.2.4.2.1.2.1.9.1.31.3.6.1.4.1.52.4.2.4.2.1.2.1.9.2.11.3.6.1.4.1.52.4.2.4.2.1.2.1.9.2.21.3.6.1.4.1.52.4.2.4.2.1.2.1.9.2.31.3.6.1.4.1.52.4.2.4.2.1.2.2.11.3.6.1.4.1.52.4.2.4.2.1.2.2.2
- Namespace
- enterasys
- Source file
CTRON-SFPS-PORT-MIB- Digest
sha256:5aab7528e9a39e14a6095f9cdbd4a186d3b59b66b653463465c7a884b085ec8d
Imports
| From | Symbols |
|---|---|
| CTRON-SFPS-INCLUDE-MIB | sfpsPortAttributeAPI, sfpsPortAttributeTable, sfpsPortConfig, sfpsPortStats |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CTRON-SFPS-INCLUDE-MIB CTRON-SFPS-PORT-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| HexInteger type | ||||
| SfpsSwitchPort type |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| sfpsInPortConfigTable OBJECT-TYPE This table contains the configuration information of each configured inbound SFPS switch port. If SFPS is not configured on a port, than an entry will not exist. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1 | not-accessible | mandatory | |
| sfpsInPortConfigEntry OBJECT-TYPE Each entry specifies the SFPS configuration for the SFPS inbound switch port for which the entry exists. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1 | not-accessible | mandatory | |
| sfpsInPortConfigPort OBJECT-TYPE The primary index to the SFPS in port table. This identifies the inbound SFPS switch port for which the entry exists. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.1 | SfpsSwitchPort | read-only | mandatory |
| sfpsInPortConfigAdminStatus OBJECT-TYPE Sets the administrative state of the SFPS inbound switch port for which the entry exists. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.2 | INTEGER {other(1), disabled(2), enabled(3), loopback(4)} | read-write | mandatory |
| sfpsInPortConfigOperStatus OBJECT-TYPE Indicates the current operating condition of the SFPS on the inbound switch port for which this entry exists. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.3 | INTEGER {other(1), disabled(2), enabled(3), pending-disable(4), pending-enable(5), invalid-config(6), testing(7)} | read-only | mandatory |
| sfpsInPortConfigOperTime OBJECT-TYPE Indicates the elapsed time, in hundredths of a second, that sfpsInPortOperStatus has been in its current operational state on the SFPS inbound switch port for which this entry exists. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.4 | TimeTicks | read-only | mandatory |
| sfpsInPortConfigType OBJECT-TYPE Sets the type of port access attribute for the inbound SFPS port for which the entry exists. Access ports allow single user or shared access and perform statisics and control; network ports are equivalent to trunk ports with no access control; host management port indicates the (virtual) port to which the (internal) management agent is attached; host control port indicates the port to redirect non-management packets. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.5 | INTEGER {other(1), access-port(2), network-port(3), host-mgmt-port(4), host-ctl-port(5), unknown(6), going-to-access(7), hybrid-port(8), stand-by(9), network-only(10), accessOnly(11), raPrimary(12), uplink(13), fclStandby(14), loopStandby(15), raStandby(16), flood(17), uplinkFlood(18), downlinkFlood(19), unknown-ra-standby(20)} | read-write | mandatory |
| sfpsInPortConfigReservedBW OBJECT-TYPE Sets the amount of Bandwidth that is reserved for the inbound SFPS port for which this entry exists. This bandwidth is set aside for this port and may be given to another port if unused. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.6 | INTEGER | read-write | mandatory |
| sfpsInPortConfigAllocBW OBJECT-TYPE Sets the amount of Bandwidth that is allocated for the inbound SFPS port for which this entry exists. This bandwidth may be less than the reserved bandwidth. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.7 | INTEGER | read-only | mandatory |
| sfpsInPortConfigQoS OBJECT-TYPE Sets the desired QoS service class for the inbound SFPS port for which this entry exists. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.8 | INTEGER | read-write | mandatory |
| sfpsInPortConfigQSize OBJECT-TYPE Indicates the maximum inbound queue size for this port. Size is indicated in packets (packet descriptors). | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.9 | INTEGER | read-only | mandatory |
| sfpsInPortConfigQLen OBJECT-TYPE Indicates the actual inbound queue size for this port. Size is indicated in packets (packet descriptors). This is a transient value that reflects the current depth of queue. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.10 | Gauge | read-only | mandatory |
| sfpsInPortConfigSwitchId OBJECT-TYPE This entry is the id of the port. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.11 | OCTET STRING | read-only | mandatory |
| sfpsInPortConfigMediaType OBJECT-TYPE | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.12 | INTEGER {ethernet(1), fddi(2), atm-lec(3), token-ring(4), wan(5), inb(6), hcp(7), hdp(8), atm-svc(9), atm-pvc(10), unknown(11), atm-forum-lec(12), atm-forum-pvc(13), atm-forum-svc(14)} | read-only | mandatory |
| sfpsInPortConfigFrontPanelPort OBJECT-TYPE This represents the front panel physical port number | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.13 | SfpsSwitchPort | read-only | mandatory |
| sfpsInPortConfigLinkStatus OBJECT-TYPE The link status of this port. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.14 | INTEGER {other(1), linkUp(2), linkDown(3), link-N-A(4)} | read-only | mandatory |
| sfpsInPortConfigLinkStateAge OBJECT-TYPE Number of time ticks that link has been in this state. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.15 | TimeTicks | read-only | mandatory |
| sfpsInPortConfigRouterPort OBJECT-TYPE Specifies whether this port is a router port. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.16 | INTEGER {other(1), router-port(2), no-router(3)} | read-only | mandatory |
| sfpsInPortConfigSlotNumber OBJECT-TYPE Slot number in the chassis. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.17 | INTEGER | read-only | mandatory |
| sfpsInPortConfigMib2PortId OBJECT-TYPE Mib2 Port id | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.18 | INTEGER | read-only | mandatory |
| sfpsInPortConfigTopoAgent OBJECT-TYPE Topology Agent | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.19 | DisplayString | read-only | mandatory |
| sfpsInPortConfigLayer3Learning OBJECT-TYPE Topology Agent | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.22 | INTEGER {other(1), enabled(2), disabled(3)} | read-only | mandatory |
| sfpsOutPortConfigTable OBJECT-TYPE This table contains the configuration information of each configured outbound SFPS switch port. If SFPS is not configured on a port, than an entry will not exist. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2 | not-accessible | mandatory | |
| sfpsOutPortConfigEntry OBJECT-TYPE Each entry specifies the SFPS configuration for the SFPS outbound switch port for which the entry exists. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1 | not-accessible | mandatory | |
| sfpsOutPortConfigPort OBJECT-TYPE The primary index to the SFPS in port table. This identifies the outbound SFPS switch port for which the entry exists. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.1 | SfpsSwitchPort | read-only | mandatory |
| sfpsOutPortConfigAdminStatus OBJECT-TYPE Sets the administrative state of the SFPS outbound switch port for which the entry exists. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.2 | INTEGER {other(1), disabled(2), enabled(3), loopback(4)} | read-write | mandatory |
| sfpsOutPortConfigOperStatus OBJECT-TYPE Indicates the current operating condition of the SFPS on the outbound switch port for which this entry exists. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.3 | INTEGER {other(1), disabled(2), enabled(3), pending-disable(4), pending-enable(5), invalid-config(6), testing(7)} | read-only | mandatory |
| sfpsOutPortConfigOperTime OBJECT-TYPE Indicates the elapsed time, in hundredths of a second, that sfpsOutPortOperStatus has been in its current operational state on the SFPS outbound switch port for which this entry exists. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.4 | TimeTicks | read-only | mandatory |
| sfpsOutPortConfigType OBJECT-TYPE Sets the type of port access attribute for the outbound SFPS port for which the entry exists. Access ports allow single user or shared access and perform statisics and control; network ports are equivalent to trunk ports with no access control; host management port indicates the (virtual) port to which the (internal) management agent is attached; host control port indicates the port to redirect non-management packets. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.5 | INTEGER {other(1), access-port(2), network-port(3), host-mgmt-port(4), host-ctl-port(5), unknown(6), going-to-access(7), hybrid-port(8), stand-by(9), network-only(10), accessOnly(11), raPrimary(12), standbyFCLConflict(13), standbyLoopedPort(14), standbyVersionConflict(15), standbyRANonPrimary(16), flood(17), uplinkFlood(18), downlinkFlood(19), unknown-ra-standby(20)} | read-write | mandatory |
| sfpsOutPortConfigReservedBW OBJECT-TYPE Sets the amount of Bandwidth that is reserved for the outbound SFPS port for which this entry exists. This bandwidth is set aside for this port and may be given to another port if unused. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.6 | INTEGER | read-write | mandatory |
| sfpsOutPortConfigAllocBW OBJECT-TYPE Sets the amount of Bandwidth that is allocated for the outbound SFPS port for which this entry exists. This bandwidth may be less than the reserved bandwidth. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.7 | INTEGER | read-only | mandatory |
| sfpsOutPortConfigQoS OBJECT-TYPE Sets the desired QoS service class for the outbound SFPS port for which this entry exists. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.8 | INTEGER | read-write | mandatory |
| sfpsOutPortConfigQSize OBJECT-TYPE Indicates the maximum outbound queue size for this port. Size is indicated in packets (packet descriptors). | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.9 | INTEGER | read-only | mandatory |
| sfpsOutPortConfigQLen OBJECT-TYPE Indicates the actual outbound queue size for this port. Size is indicated in packets (packet descriptors). This is a transient value that reflects the current depth of queue. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.10 | Gauge | read-only | mandatory |
| sfpsOutPortConfigSwitchId OBJECT-TYPE This entry is id of the port. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.11 | OCTET STRING | read-only | mandatory |
| sfpsOutPortConfigMediaType OBJECT-TYPE | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.12 | INTEGER {ethernet(1), fddi(2), atm-lec(3), token-ring(4), wan(5), inb(6), hcp(7), hdp(8), atm-encap(9), atm-pvc(10), unknown(11), atm-forum-lec(12), atm-forum-pvc(13), atm-forum-svc(14)} | read-only | mandatory |
| sfpsOutPortConfigFrontPanelPort OBJECT-TYPE | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.13 | SfpsSwitchPort | read-only | mandatory |
| sfpsOutPortConfigLinkStatus OBJECT-TYPE The link status of this port. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.14 | INTEGER {other(1), linkUp(2), linkDown(3), linkNA(4)} | read-only | mandatory |
| sfpsOutPortConfigLinkStateAge OBJECT-TYPE Number of time ticks that link has been in this state. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.15 | TimeTicks | read-only | mandatory |
| sfpsOutPortConfigRouterPort OBJECT-TYPE Specifies whether this port is a router port. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.16 | INTEGER {other(1), router-port(2), no-router(3)} | read-only | mandatory |
| sfpsOutPortConfigSlotNumber OBJECT-TYPE Slot number in the chassis. | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.17 | INTEGER | read-only | mandatory |
| sfpsOutPortConfigMib2PortId OBJECT-TYPE Mib2 Port id | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.18 | INTEGER | read-only | mandatory |
| sfpsPortAttributePort OBJECT-TYPE | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.9.1.1 | INTEGER | read-only | mandatory |
| sfpsPortAttributeAttributes OBJECT-TYPE | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.9.1.2 | HexInteger | read-only | mandatory |
| sfpsPortAttributeLearnSelfArp OBJECT-TYPE | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.9.1.3 | INTEGER {on(1), off(2)} | read-only | mandatory |
| sfpsPortAttributeAPIVerb OBJECT-TYPE | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.9.2.1 | INTEGER {other(1), resetAll(2), resetPort(3), enablePortAttr(4), disablePortAttr(5)} | read-write | mandatory |
| sfpsPortAttributeAPIPort OBJECT-TYPE | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.9.2.2 | INTEGER | read-write | mandatory |
| sfpsPortAttributeAPIAttribute OBJECT-TYPE | 1.3.6.1.4.1.52.4.2.4.2.1.2.1.9.2.3 | INTEGER {learnSelfArp(1), none(2)} | read-write | mandatory |
| sfpsInPortStatsTable OBJECT-TYPE This table contains the packet and byte counters for each inbound SFPS switch port. | 1.3.6.1.4.1.52.4.2.4.2.1.2.2.1 | not-accessible | mandatory | |
| sfpsInPortStatsEntry OBJECT-TYPE Specifies the SFPS packet and byte counters for the inbound SFPS switch port for which this entry exists. | 1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1 | not-accessible | mandatory | |
| sfpsInPortStatsPort OBJECT-TYPE The primary index to the SFPS port table. This identifies the SFPS inbound switch port for which the entry exists. | 1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.1 | SfpsSwitchPort | read-only | mandatory |
| sfpsInPortStatsAdminStatus OBJECT-TYPE Sets the administrative state of the SFPS packet and byte counters on the inbound SFPS switch port for which this entry exists. | 1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.2 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| sfpsInPortStatsReset OBJECT-TYPE Resets the SFPS packet and byte counters on the inbound SFPS switch port for which this entry exists. | 1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.3 | INTEGER {other(1), reset(2)} | read-write | mandatory |
| sfpsInPortStatsOperTime OBJECT-TYPE Indicates the amount of time (# of time ticks) that the port-specific SFPS packet and byte counters have been active on the inbound SFPS switch port for which this entry exists. | 1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.4 | TimeTicks | read-only | mandatory |
| sfpsInPortStatsPkts OBJECT-TYPE Indicates the total number of SFPS packets that have been received, during sfpsInPortStatsOpertime, on the inbound SFPS switch port for which this entry exists. | 1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.5 | Counter | read-only | mandatory |
| sfpsInPortStatsDiscardPkts OBJECT-TYPE Indicates the total number of SFPS packets that have been discarded (dropped), during sfpsInPortStatsOpertime, on the inbound SFPS switch port for which this entry exists | 1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.6 | Counter | read-only | mandatory |
| sfpsInPortStatsBytes OBJECT-TYPE Indicates the total number of SFPS bytes that have been received, during sfpsInPortStatsOperTime, on the inbound SFPS switch port for which the entry exists. | 1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.7 | Counter | read-only | mandatory |
| sfpsInPortStatsDiscardBytes OBJECT-TYPE Indicates the total number of bytes in the SFPS packets that have been discarded (dropped), during sfpsInPortStatsOperTime, on the inbound SFPS switch port for which the entry exists. | 1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.8 | Counter | read-only | mandatory |
| sfpsInPortStatsQOverflows OBJECT-TYPE Indicates the total number of queue overflow conditions have been experienced for the inbound SFPS switch port for which the entry exists. | 1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.9 | Counter | read-only | mandatory |
| sfpsInPortStatsLinkUps OBJECT-TYPE The number of link ups that this port has seen. | 1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.10 | Counter | read-only | mandatory |
| sfpsInPortStatsLinkDowns OBJECT-TYPE The number of link downs that this port has seen. | 1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.11 | Counter | read-only | mandatory |
| sfpsOutPortStatsTable OBJECT-TYPE This table contains the packet and byte counters for each outbound SFPS switch port. | 1.3.6.1.4.1.52.4.2.4.2.1.2.2.2 | not-accessible | mandatory | |
| sfpsOutPortStatsEntry OBJECT-TYPE Specifies the SFPS packet and byte counters for the outbound SFPS switch port for which this entry exists. | 1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1 | not-accessible | mandatory | |
| sfpsOutPortStatsPort OBJECT-TYPE The primary index to the SFPS port table. This identifies the SFPS outbound switch port for which the entry exists. | 1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.1 | SfpsSwitchPort | read-only | mandatory |
| sfpsOutPortStatsAdminStatus OBJECT-TYPE Sets the administrative state of the SFPS packet and byte counters on the outbound SFPS switch port for which this entry exists. | 1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.2 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| sfpsOutPortStatsReset OBJECT-TYPE Resets the SFPS packet and byte counters on the outbound SFPS switch port for which this entry exists. | 1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.3 | INTEGER {other(1), reset(2)} | read-write | mandatory |
| sfpsOutPortStatsOperTime OBJECT-TYPE Indicates the amount of time (# of time ticks) that the port-specific SFPS packet and byte counters have been active on the outbound SFPS switch port for which this entry exists. | 1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.4 | TimeTicks | read-only | mandatory |
| sfpsOutPortStatsPkts OBJECT-TYPE Indicates the total number of SFPS packets that have been received, during sfpsOutPortStatsOpertime, on the outbound SFPS switch port for which this entry exists. | 1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.5 | Counter | read-only | mandatory |
| sfpsOutPortStatsDiscardPkts OBJECT-TYPE Indicates the total number of SFPS packets that have been discarded (dropped), during sfpsOutPortStatsOpertime, on the outbound SFPS switch port for which this entry exists | 1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.6 | Counter | read-only | mandatory |
| sfpsOutPortStatsBytes OBJECT-TYPE Indicates the total number of SFPS bytes that have been received, during sfpsOutPortStatsOperTime, on the outbound SFPS switch port for which the entry exists. | 1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.7 | Counter | read-only | mandatory |
| sfpsOutPortStatsDiscardBytes OBJECT-TYPE Indicates the total number of bytes in the SFPS packets that have been discarded (dropped), during sfpsOutPortStatsOperTime, on the outbound SFPS switch port for which the entry exists. | 1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.8 | Counter | read-only | mandatory |
| sfpsOutPortStatsQOverflows OBJECT-TYPE Indicates the total number of queue overflow conditions have been experienced for the outbound SFPS switch port for which the entry exists. | 1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.9 | Counter | read-only | mandatory |
| sfpsOutPortStatsLinkUps OBJECT-TYPE The number of link ups that this port has seen. | 1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.10 | Counter | read-only | mandatory |
| sfpsOutPortStatsLinkDowns OBJECT-TYPE The number of link downs that this port has seen. | 1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.11 | Counter | read-only | mandatory |