CTRON-SFPS-BINDERY-MIB
- Registered at
- 1.3.6.1.4.1.52.4.2.4.2.2.7.2
- Namespace
- enterasys
- Source file
CTRON-SFPS-BINDERY-MIB- Digest
sha256:3dc650e9eba8e68848598c4465b94b7111de9b6d558c2ba734d287c7486d66d0
Imports
| From | Symbols |
|---|---|
| CTRON-SFPS-INCLUDE-MIB | sfpsAgentConfig |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CTRON-SFPS-BINDERY-MIB CTRON-SFPS-INCLUDE-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| HexInteger type |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| sfpsAgentBinderyConfigTable OBJECT-TYPE Soft Binding is implemented through a few new base classes, a small army of instances of the base classes plus a bindery table to tie the whole mess together. | 1.3.6.1.4.1.52.4.2.4.2.2.7.1 | not-accessible | mandatory | |
| sfpsAgentBinderyConfigEntry OBJECT-TYPE Each entry specifies the configuration for the bindery component. | 1.3.6.1.4.1.52.4.2.4.2.2.7.1.1 | not-accessible | mandatory | |
| sfpsAgentBinderyConfigHashLeaf OBJECT-TYPE NO hash, part of instance key. | 1.3.6.1.4.1.52.4.2.4.2.2.7.1.1.1 | HexInteger | read-only | mandatory |
| sfpsAgentBinderyConfigHashIndex OBJECT-TYPE NO Bucket index, part of instance key. | 1.3.6.1.4.1.52.4.2.4.2.2.7.1.1.2 | INTEGER | read-only | mandatory |
| sfpsAgentBinderyConfigName OBJECT-TYPE Elements Name. | 1.3.6.1.4.1.52.4.2.4.2.2.7.1.1.3 | DisplayString | read-only | mandatory |
| sfpsAgentBinderyConfigType OBJECT-TYPE Type of element. | 1.3.6.1.4.1.52.4.2.4.2.2.7.1.1.4 | DisplayString | read-only | mandatory |
| sfpsAgentBinderyConfigOperStatus OBJECT-TYPE Operational state of the entry. | 1.3.6.1.4.1.52.4.2.4.2.2.7.1.1.5 | INTEGER {kStatusRunning(1), kStatusHalted(2), kStatusPending(3), kStatusFaulted(4), kStatusNotStarted(5)} | read-only | mandatory |
| sfpsAgentBinderyConfigAdminStatus OBJECT-TYPE Administrative state of the entry. | 1.3.6.1.4.1.52.4.2.4.2.2.7.1.1.6 | INTEGER {other(1), disable(2), enable(3)} | read-only | mandatory |
| sfpsAgentBinderyConfigStatusTime OBJECT-TYPE Time tick of last OperStatus change. | 1.3.6.1.4.1.52.4.2.4.2.2.7.1.1.7 | TimeTicks | read-only | mandatory |
| sfpsAgentBinderyConfigNVStatus OBJECT-TYPE Administrative state of the entry. | 1.3.6.1.4.1.52.4.2.4.2.2.7.1.1.8 | INTEGER {other(1), disable(2), enable(3), unset(4)} | read-write | mandatory |
| sfpsAgentBinderyAPI OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.4.2.2.7.2 | |||
| sfpsAgentBinderyAPIVerb OBJECT-TYPE The BinderyAPI is a flat MIB that can be used to enable/disable Bindery components, and to save the enable/disable info into Nvram. The next reboot/reset, each SFPSElement will check the NvramStatus and not start if disabled. | 1.3.6.1.4.1.52.4.2.4.2.2.7.2.1 | INTEGER {getStatus(1), nextElem(2), disable(3), disableInNvram(4), enable(5), enableInNvram(6), clear(7), clearAll(8)} | read-write | mandatory |
| sfpsAgentBinderyAPIElementName OBJECT-TYPE Enter in the dotted notation Bindery ID (xxx.yyy.zzz) of the SFPSElement you wish to perform the action. | 1.3.6.1.4.1.52.4.2.4.2.2.7.2.2 | DisplayString | read-write | mandatory |
| sfpsAgentBinderyAPINVStatus OBJECT-TYPE Displays the Current Admin Status of this Element in Nvram. | 1.3.6.1.4.1.52.4.2.4.2.2.7.2.3 | INTEGER {other(1), disable(2), enable(3), unset(4), invalid(5)} | read-only | mandatory |
| sfpsAgentBinderyAPIAdminStatus OBJECT-TYPE Displays the Current AdminStatus of the SFPSElement. | 1.3.6.1.4.1.52.4.2.4.2.2.7.2.4 | INTEGER {other(1), disable(2), enable(3), invalid(4)} | read-only | mandatory |
| sfpsAgentBinderyAPIOperStatus OBJECT-TYPE Displays the Current OperStatus of the SFPSElement. | 1.3.6.1.4.1.52.4.2.4.2.2.7.2.5 | INTEGER {running(1), halted(2), pending(3), faulted(4), notStarted(5), invalid(6)} | read-only | mandatory |
| sfpsAgentBinderyAPINvSet OBJECT-TYPE Total number of SFPSElements stored in NVRAM for persistence. | 1.3.6.1.4.1.52.4.2.4.2.2.7.2.6 | INTEGER | read-only | mandatory |
| sfpsAgentBinderyAPINvTotal OBJECT-TYPE Total number of SFPSElements allocated in NVRAM. The switch will always allocate enough space in NVRAM for the number of elements. That is, NvTotal will always be greater than or equal to NvSet. | 1.3.6.1.4.1.52.4.2.4.2.2.7.2.7 | INTEGER | read-only | mandatory |
| sfpsAgentBinderyAPIDefaultStatus OBJECT-TYPE | 1.3.6.1.4.1.52.4.2.4.2.2.7.2.8 | INTEGER {other(1), disable(2), enable(3), unset(4), invalid(5)} | read-only | mandatory |