MIBs Depot

CTRON-SFCS-MIB

Registered at
1.3.6.1.4.1.52.4.1.2.11.1.1.1
1.3.6.1.4.1.52.4.1.2.11.1.1.2
1.3.6.1.4.1.52.4.1.2.11.1.1.3
1.3.6.1.4.1.52.4.1.2.11.1.1.4
1.3.6.1.4.1.52.4.1.2.11.1.1.5
1.3.6.1.4.1.52.4.1.2.11.1.1.7
1.3.6.1.4.1.52.4.1.2.11.1.1.8
1.3.6.1.4.1.52.4.1.2.11.1.1.9
1.3.6.1.4.1.52.4.1.2.11.1.1.12
1.3.6.1.4.1.52.4.1.2.11.1.1.13
Namespace
enterasys
Source file
CTRON-SFCS-MIB
Digest
sha256:f16f501d77fabcdaefbd550a6b4c7727ee6bf865ea597b8d6e455827d7188925

Imports

FromSymbols
ATM-MIBatmVcCrossConnectHighIfIndex, atmVcCrossConnectHighVci, atmVcCrossConnectHighVpi, atmVcCrossConnectIndex, atmVcCrossConnectLowIfIndex, atmVcCrossConnectLowVci, atmVcCrossConnectLowVpi
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIIpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, enterprises, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ATM-MIB
ATM-TC-MIB
CTRON-SFCS-MIB
IANAifType-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
cabletron
OBJECT-IDENTITY
1.3.6.1.4.1.52
mibs
OBJECT-IDENTITY
1.3.6.1.4.1.52.4
ctron
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1
ctSwitch
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11
ctsfSwitch
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1
ctSFCS
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1
sfcsSystem
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.1
sfcsSysConfig
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.1.1
sfcsSysConfigTable
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1
sfcsSysConfigEnt
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1
sfcsSysConfigAdminStatus
OBJECT-TYPE
Sets the administrative state of the SFCS switching services for this virtual switch. This controls the SFCS state at a chassis level. Regardless of the per-interface state of each SFCS switching element and the state of active connections, writing the value disabled(2) will cause the entire switch to immediately shutdown. enabled(1) -- startup the SFCS disabled(2) -- shutdown the SFCS other(3) -- none of the following
1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.1INTEGER {enabled(1), disabled(2), other(3)}read-writemandatory
sfcsSysConfigOperStatus
OBJECT-TYPE
Indicates the current operating condition of this switch. enabled(1) -- running disabled(2) -- not running other(3) -- none of the following pending-disable(4) -- shut-down in progress pending-enable(5) -- start-up in progress invalid-config(6) -- not running,invalid config
1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.2INTEGER {enabled(1), disabled(2), other(3), pending-disable(4), pending-enable(5), invalid-config(6)}read-onlymandatory
sfcsSysConfigOperTime
OBJECT-TYPE
Indicates the amount of time (# of time ticks) that this switch system has been in its current operational state.
1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.3TimeTicksread-onlymandatory
sfcsSysConfigLastChange
OBJECT-TYPE
Indicates the last time a change was made to the configuration entry for this switch.
1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.4TimeTicksread-onlymandatory
sfcsSysConfigSwitchCapacity
OBJECT-TYPE
Indicates the maximum front panel bandwidth based on current hardware configuration of the switch in Mbps
1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.5INTEGERread-onlymandatory
sfcsSysConfigMaxCnxEntries
OBJECT-TYPE
Indicates the maximum number of connections which can be established on this switch.
1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.6INTEGERread-onlymandatory
sfcsSysConfigMaxStatEntries
OBJECT-TYPE
Indicates the maximum number of stats enabled VCs for this switch.
1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.7INTEGERread-onlymandatory
sfcsSysConfigMaxUpcEntries
OBJECT-TYPE
Indicates the maximum number of UPC enabled VCs for this switch.
1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.8INTEGERread-onlymandatory
sfcsSysConfigNumberANIMS
OBJECT-TYPE
Indicates the number of ATM Network Inteface Modules currently configured on this switch.
1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.9INTEGERread-onlymandatory
sfcsSysConfigInterfaceCapability
OBJECT-TYPE
Indicates the total bandwidth capability(of the engine) for this switch expressed in Mbps.
1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.10INTEGERread-onlymandatory
sfcsSysConfigTypeofSwitch
OBJECT-TYPE
Indicates what type of switch this is. other(1) sfcellswitch(2) sfpacketswitch(3)
1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.11INTEGER {other(1), sfcellswitch(2), sfpacketswitch(3)}read-onlymandatory
sfcsSysConfigPolicingSupport
OBJECT-TYPE
Indicates whether or not this switch supports policing. supported(1) not supported(2)
1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.12TruthValueread-onlymandatory
sfcsSysConfigPnniNsapPrefix
OBJECT-TYPE
This is the 13 byte NSAP prefix to use with address registration.
1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.13OCTET STRING (SIZE(13))read-writemandatory
sfcsSysConfigPnniNodeLevel
OBJECT-TYPE
This is the PNNI node level value. The range can be from 0 to 104.
1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.14INTEGERread-writemandatory
sfcsSysConfigPnniAddessingMode
OBJECT-TYPE
This is the PNNI addressing mode - that can range from 0 to 2. 0 - Auto Mode using MAC 1 - Auto Mode using board# 2 - Manual
1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.15INTEGERread-writemandatory
sfcsSysConfigPnniAddessingAdmnStatus
OBJECT-TYPE
This is the PNNI addressing admn status. Down - 2. Up - 1.
1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.16INTEGERread-writemandatory
sfcsSysConfigFMVer
OBJECT-TYPE
This is the Firmware Revision of the switch.
1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.17OCTET STRING (SIZE(8))read-onlymandatory
sfcsSysConfigCTMSlotMask
OBJECT-TYPE
This is the slot mask for all ctm boards in the chassis. The least significant bit represents slot 1.
1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.18INTEGERread-onlymandatory
sfcsSysConfigMaxfreecva
OBJECT-TYPE
This is the maximum number of CAC connection blocks that CAC will allow on its free list. The default is 1024. If too low CAC performance will degrade (thrashing control blocks), If too high, memory exhaustion may occur.
1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.19INTEGERread-writemandatory
sfcsSysConfigUBR
OBJECT-TYPE
For the set operation: UBR_Cfg is set across all boards in the chassis (that are operational and manageable). For the get operation: UBR_Cfg setting is retrived from the current chassis manager only (one slot only). IF boards are introduced or re-introduced to the chassis their UBR value will be 0. In order to insure a required UBR_Cfg value the set operation should be proformed after slot insertions or re-insertions are completed to the chassis.
1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.20INTEGERread-writemandatory
sfcsSysStatus
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.1.2
sfcsSysStatusTable
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1
sfcsSysStatusEnt
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1.1
sfcsSysStatusTdmCellCount
OBJECT-TYPE
Indicates the total number of cells being transfered across the TDM for the entire switch.
1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1.1.1OCTET STRINGread-onlymandatory
sfcsSysStatusTdmUtilization
OBJECT-TYPE
Indicates the total percentage TDM utilization for the switch.
1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1.1.2INTEGER (0..100)read-onlymandatory
sfcsSysStatusCurrCnxEntries
OBJECT-TYPE
Indicates the current number of connection entries for this switch.
1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1.1.3INTEGERread-onlymandatory
sfcsSysStatusCurrUPCEntries
OBJECT-TYPE
Indicates the current number of UPC entries for this switch.
1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1.1.4INTEGERread-onlymandatory
sfcsSysStatusCurrStatsEntries
OBJECT-TYPE
Indicates the current number of statistics entries for this switch.
1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1.1.5INTEGERread-onlymandatory
sfcsSysStatusAllocatedBw
OBJECT-TYPE
Indicates the current allocated bandwidth of the switch in bits per second.
1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1.1.6INTEGERread-onlymandatory
sfcsSysSystemCfg
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.1.3
sfcsSysSystemCfgTable
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.1.3.1
sfcsSysSystemCfgEnt
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.1.3.1.1
sfcsSysConfigAdminReset
OBJECT-TYPE
Resets this virtual switch. Writing a value of reset(2) will force a restart of the entire switch, without any graceful shutdown. Any active connections or services will be interrupted. other(1) -- none of the following reset(2) -- force a reset
1.3.6.1.4.1.52.4.1.2.11.1.1.1.3.1.1.1INTEGER {other(1), reset(2)}read-writemandatory
sfcsSysConfigATOMPersistance
OBJECT-TYPE
This enables or disables ATOM mib persistance. enabled(1) disabled(2)
1.3.6.1.4.1.52.4.1.2.11.1.1.1.3.1.1.2INTEGER {enabled(1), disabled(2)}read-writemandatory
sfcsSysConfigVcSize
OBJECT-TYPE
This entry is the size of VCs allocated for all VPs in the switch.
1.3.6.1.4.1.52.4.1.2.11.1.1.1.3.1.1.3INTEGERread-writemandatory
sfcsSysConfigPowerUpDiags
OBJECT-TYPE
This enables or disables power up diags. enabled(1) disabled(2)
1.3.6.1.4.1.52.4.1.2.11.1.1.1.3.1.1.4INTEGER {enabled(1), disabled(2)}read-writemandatory
sfcsSysBPCfg
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.1.4
sfcsSysBPTable
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.1.4.1
sfcsSysBPEnt
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.1.4.1.1
sfcsSysBPClkSelect
OBJECT-TYPE
This enables one of two backplane clocks from any slot. A valid entry is any number that correspond to a slot having a board supporting this mib. A write to this mib will fail if the board with the number selected is deriving its clock from the backplane. A value of 0 indicates that no board is driving the backplane.
1.3.6.1.4.1.52.4.1.2.11.1.1.1.4.1.1.1INTEGERread-writemandatory
sfcsEngine
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.2
sfcsConfig
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.2.1
sfcsConfigTable
OBJECT-TYPE
This table contains the configuration and administrative information for each SFCS module. Essentially, a separate SFCS instance exists for each switch module. If SFCS is not configured on a module, than an entry will not exist.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1not-accessiblemandatory
sfcsConfigEntry
OBJECT-TYPE
Each entry specifies the SFCS configuration for the SFCS module.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1not-accessiblemandatory
sfcsConfigSlotIndex
OBJECT-TYPE
The primary index to the SFCS switch table. This identifies the chassis slot number for this switch module.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.1INTEGERread-onlymandatory
sfcsConfigAdminStatus
OBJECT-TYPE
Sets the administrative state of the SFCS switching services for this SFCS module. This controls the SFCS state at a module level. Regardless of the per-interface state of each SFCS switching interface and the state of active connections, writing the value disabled(2) will cause the SFCS to immediately shutdown. A gracefull shutdown will be attempted. enabled(1) -- startup the SFCS disabled(2) -- shutdown the SFCS other(3) -- none of the following
1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.2INTEGER {enabled(1), disabled(2), other(3)}read-writemandatory
sfcsConfigAdminReset
OBJECT-TYPE
Resets this SFCS module. Writing a value of reset(2) will force a soft restart of the SFCS without any graceful shutdown. Any active connections or services will be interrupted. other(1) -- none of the following reset(2) -- force a reset
1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.3INTEGER {other(1), reset(2)}read-writemandatory
sfcsConfigOperStatus
OBJECT-TYPE
Indicates the current operating condition of the SFCS module. enabled(1) -- running disabled(2) -- not running other(3) -- none of the following pending-disable(4) -- shut-down in progress pending-enable(5) -- start-up in progress invalid-config(6) -- not running,invalid config
1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.4INTEGER {enabled(1), disabled(2), other(3), pending-disable(4), pending-enable(5), invalid-config(6)}read-onlymandatory
sfcsConfigOperTime
OBJECT-TYPE
Indicates the amount of time (# of time ticks) that this SFCS module has been in its current operational state.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.5TimeTicksread-onlymandatory
sfcsConfigLastChange
OBJECT-TYPE
Indicates the last time a change was made to the configuration entry for this SFCS switch module.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.6TimeTicksread-onlymandatory
sfcsConfigVersion
OBJECT-TYPE
Indicates the current revision level of the SFCS MIB for this switch module expressed as an integer.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.7INTEGERread-onlymandatory
sfcsConfigMibRev
OBJECT-TYPE
Indicates in textual format the current revision level of the Cabletron SFCS MIB for this switch module.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.8DisplayStringread-onlymandatory
sfcsConfigSwitchHostPort
OBJECT-TYPE
Indicates the switch port that is attached to the host.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.9INTEGERread-onlymandatory
sfcsConfigHostCtrlATMAddr
OBJECT-TYPE
Indicates the ATM address of the host. (SAR)
1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.10OCTET STRINGread-onlymandatory
sfcsConfigSwitchCapacity
OBJECT-TYPE
Indicates the front panel bandwidth based on the hardware that is currently installed, in Mbps. (number of ports and the port type)
1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.11INTEGERread-onlymandatory
sfcsConfigMaxCnxEntries
OBJECT-TYPE
Indicates the maximum number of connections which can be established on this switch module.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.12INTEGERread-onlymandatory
sfcsConfigMaxStatEntries
OBJECT-TYPE
Indicates the maximum number of stats enabled VCs for this switch module.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.13INTEGERread-onlymandatory
sfcsConfigMaxUpcEntries
OBJECT-TYPE
Indicates the maximum number of UPC enabled VCs for this switch module.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.14INTEGERread-onlymandatory
sfcsConfigNumberANIMS
OBJECT-TYPE
Indicates the number of ATM Network Inteface Modules currently configured on this switch module.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.15INTEGERread-onlymandatory
sfcsConfigBwCapability
OBJECT-TYPE
Indicates the total bandwidth capability for this switch engine expressed in Mbps.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.16INTEGERread-onlymandatory
sfcsConfigMasterClock1Source
OBJECT-TYPE
Indicates the clocking source for MasterClock1 on each board. The write will fail if it is also currently the source of the backplane. The write will also fail if the board does not support backplane clocking.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.17INTEGER {anim-one-clk(1), anim-two-clk(2), anim-three-clk(3), anim-four-clk(4), backplane-one(5), backplane-two(6)}read-writemandatory
sfcsConfigMasterClock2Source
OBJECT-TYPE
Indicates the clocking source for MasterClock2 on each board. The write will fail if it is also currently the source of the backplane. The write will also fail if the board does not support backplane clocking.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.18INTEGER {anim-one-clk(1), anim-two-clk(2), anim-three-clk(3), anim-four-clk(4), backplane-one(5), backplane-two(6)}read-writemandatory
sfcsConfigMasterClock1Standby
OBJECT-TYPE
Indicates the clocking stand-by for MasterClock1 on each board. The write will fail if it is also currently the source of the backplane. The write will also fail if the board does not support backplane clocking. If this value is none(7) and an interrupt on the primary interface for MasterClock1 is received. MasterClock1 will switch to that anims local clock.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.19INTEGER {anim-one-clk(1), anim-two-clk(2), anim-three-clk(3), anim-four-clk(4), backplane-one(5), backplane-two(6), none(7)}read-writemandatory
sfcsConfigMasterClock2Standby
OBJECT-TYPE
Indicates the clocking stand-by for MasterClock2 on each board. The write will fail if it is also currently the source of the backplane. The write will also fail if the board does not support backplane clocking. If this value is none(7) and an interrupt on the primary interface for MasterClock1 is received. MasterClock1 will switch to that anims local clock.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.20INTEGER {anim-one-clk(1), anim-two-clk(2), anim-three-clk(3), anim-four-clk(4), backplane-one(5), backplane-two(6), none(7)}read-writemandatory
sfcsStatus
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.2.2
sfcsStatusTable
OBJECT-TYPE
This table contains the status information for each SFCS switch module.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1not-accessiblemandatory
sfcsStatusEntry
OBJECT-TYPE
Each entry contains the SFCS statistics for the SFCS instance.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1not-accessiblemandatory
sfcsStatusSlotIndex
OBJECT-TYPE
The primary index to the SFCS switch table. This identifies the chassis slot number for this SFCS module.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.1INTEGERread-onlymandatory
sfcsStatusTdmCellCount
OBJECT-TYPE
Indicates the total number of cells being transfered across the TDM for this switch module.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.2OCTET STRINGread-onlymandatory
sfcsStatusTdmUtilization
OBJECT-TYPE
Indicates the percentage TDM utilization for this switch module.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.3INTEGER (0..100)read-onlymandatory
sfcsStatusCurrCnxEntries
OBJECT-TYPE
Indicates the current number of connection entries for this switch module.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.4INTEGERread-onlymandatory
sfcsStatusCurrUPCEntries
OBJECT-TYPE
Indicates the current number of UPC entries for this switch module.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.5INTEGERread-onlymandatory
sfcsStatusCurrStatsEntries
OBJECT-TYPE
Indicates the current number of statistics entries for this switch module.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.6INTEGERread-onlymandatory
sfcsStatusCurrCtmAgent
OBJECT-TYPE
Indicates the current board number of the ctm agent for this switch module.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.7INTEGERread-onlymandatory
sfcsUPCEngine
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.2.3
sfcsUPCTable
OBJECT-TYPE
This table contains the Usage Parameter Control info for this SFCS module.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1not-accessiblemandatory
sfcsUPCEntry
OBJECT-TYPE
Each entry contains the UPC data for the SFCS instance.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1not-accessiblemandatory
sfcsUPCSlotIndex
OBJECT-TYPE
The primary index to the SFCS switch table. This identifies the slot number for this SFCS module.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1.1INTEGERread-onlymandatory
sfcsUPCAdminStatus
OBJECT-TYPE
Sets the administrative state of the SFCS module's UPC engine. enabled(1) disabled(2) other(3)
1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1.2INTEGER {enabled(1), disabled(2), other(3)}read-writemandatory
sfcsUPCOperStatus
OBJECT-TYPE
Indicates the operational state of the SFCS module's UPC engine.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1.3INTEGER {enabled(1), disabled(2), other(3)}read-onlymandatory
sfcsUPCReset
OBJECT-TYPE
Resets the UPC engine for this SFCS module. other(1) reset(2)
1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1.4INTEGER {other(1), reset(2)}read-writemandatory
sfcsUPCOperTime
OBJECT-TYPE
Indicates the amount of time (# of time ticks) that the UPC engine has been active for this switch module.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1.5TimeTicksread-onlymandatory
sfcsStatisticsEngine
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.2.4
sfcsStatsEngineTable
OBJECT-TYPE
This table contains information for the Statistics engine for a particular switch module.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1not-accessiblemandatory
sfcsStatsEngineEntry
OBJECT-TYPE
Each entry contains the statistics engine data for the SFCS module.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1not-accessiblemandatory
sfcsStatsEngineSlotIndex
OBJECT-TYPE
The primary index to the SFCS stats engine table. This identifies the chassis slot number for this SFCS module.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1.1INTEGERread-onlymandatory
sfcsStatsEngineAdminStatus
OBJECT-TYPE
Sets the administrative state of the SFCS switch statistics engine. Writing a value of enabled(1) causes these counters to become active for this SFCS switch instance. Writing a value of disabled(2) causes these counters to become inactive for this SFCS module. enabled(1) disabled(2) other(3)
1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1.2INTEGER {enabled(1), disabled(2), other(3)}read-writemandatory
sfcsStatsEngineOperStatus
OBJECT-TYPE
Indicates the operational state of the SFCS switch statistics engine for this switch module. enabled(1) disabled(2) other(3)
1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1.3INTEGER {enabled(1), disabled(2), other(3)}read-onlymandatory
sfcsStatsEngineReset
OBJECT-TYPE
Resets the SFCS switch counters for this SFCS module. Writing a value of reset(2) resets the SFCS switch counters to 0 and causes sfcsStatsEngineOperTime to also be reset to 0. other(1) reset(2)
1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1.4INTEGER {other(1), reset(2)}read-writemandatory
sfcsStatsEngineOperTime
OBJECT-TYPE
Indicates the amount of time (# of time ticks) that the SFCS switch statistics have been active for this switch module.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1.5TimeTicksread-onlymandatory
sfcsPacketDiscardEngine
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.2.5
sfcsPacketDiscardEngineTable
OBJECT-TYPE
This table contains information for the Packet Discard engine for a particular switch module.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1not-accessiblemandatory
sfcsPacketDiscardEngineEntry
OBJECT-TYPE
Each entry contains the packet discard engine data for the SFCS module.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1not-accessiblemandatory
sfcsPacketDiscardEngineSlotIndex
OBJECT-TYPE
The primary index to the SFCS packet discard engine table. This identifies the chassis slot number for this SFCS module.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.1INTEGERread-onlymandatory
sfcsPacketDiscardEngineAdminStatus
OBJECT-TYPE
Sets the administrative state of the SFCS switch packet discard engine. Writing a value of enabled(1) causes these packet discard registers to become active for this SFCS switch instance. Writing a value of disabled(2) causes these packet discard registers to become inactive for this SFCS module. enabled(1) disabled(2) other(3)
1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.2INTEGER {enabled(1), disabled(2), other(3)}read-writemandatory
sfcsPacketDiscardEngineOperStatus
OBJECT-TYPE
Indicates the operational state of the SFCS switch packet discard engine for this switch module. enabled(1) disabled(2) other(3)
1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.3INTEGER {enabled(1), disabled(2), other(3)}read-onlymandatory
sfcsPacketDiscardEngineReset
OBJECT-TYPE
Resets the SFCS switch registers for this SFCS module. Writing a value of reset(2) resets the SFCS switch packet discard registers to 0 and causes sfcsPacketDiscardEngineOperTime to also be reset to 0. other(1) reset(2)
1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.4INTEGER {other(1), reset(2)}read-writemandatory
sfcsPacketDiscardEngineEPDPercentage
OBJECT-TYPE
Sets the Early Packet Discard threshold percentage for every port, and every priority on a single blade.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.5INTEGER (0..100)read-writemandatory
sfcsPacketDiscardEngineOperTime
OBJECT-TYPE
Indicates the amount of time (# of time ticks) that the SFCS switch packet discard engine has been active for this switch module.
1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.6TimeTicksread-onlymandatory
sfcsANIM
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.3
sfcsANIMConfig
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.3.1
sfcsANIMConfigTable
OBJECT-TYPE
This table contains the configuration information for each SFCS ANIM instance.
1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1not-accessiblemandatory
sfcsANIMConfigEntry
OBJECT-TYPE
Each entry contains the SFCS config info for the SFCS instance.
1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1not-accessiblemandatory
sfcsANIMConfigANIMIndex
OBJECT-TYPE
This index specifies which ANIM we are dealing with. This reference is in the same format as MIB II's InterfaceIndex.
1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.1INTEGERread-onlymandatory
sfcsANIMConfigAdminStatus
OBJECT-TYPE
Sets the administrative state of the SFCS switch ANIM. enabled(1) disabled(2) other(3)
1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.2INTEGER {enabled(1), disabled(2), other(3)}read-writemandatory
sfcsANIMConfigOperStatus
OBJECT-TYPE
Indicates the operational state of the SFCS switch ANIM for this SFCS ANIM instance. enabled(1) disabled(2) other(3)
1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.3INTEGER {enabled(1), disabled(2), other(3)}read-onlymandatory
sfcsANIMConfigANIMType
OBJECT-TYPE
Indicates the type of physical interface for this ANIM. The types are described in ctron.oids
1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.4OBJECT IDENTIFIERread-onlymandatory
sfcsANIMConfigNumInterfaces
OBJECT-TYPE
Indicates the number of operational interfaces for this ANIM.
1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.5INTEGERread-onlymandatory
sfcsANIMConfigLineRate
OBJECT-TYPE
Indicates the line rate per port for this ANIM in Mbps.
1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.6INTEGERread-onlymandatory
sfcsANIMConfigToMB
OBJECT-TYPE
This is the ANIM clock source to board.
1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.7INTEGER {local-anim-clock(1), port-one-clock(2), port-two-clock(3), port-three-clock(4), port-four-clock(5)}read-writemandatory
sfcsANIMConfigMBClockSelect
OBJECT-TYPE
This indicates the ANIM clock source.
1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.8INTEGER {master-clk-one(1), master-clk-two(2)}read-writemandatory
sfcsANIMStatistics
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.3.2
sfcsANIMStatsTable
OBJECT-TYPE
This table contains the statistics information for each SFCS ANIM instance.
1.3.6.1.4.1.52.4.1.2.11.1.1.3.2.1not-accessiblemandatory
sfcsANIMStatsEntry
OBJECT-TYPE
Each entry contains the SFCS statistics for the SFCS instance.
1.3.6.1.4.1.52.4.1.2.11.1.1.3.2.1.1not-accessiblemandatory
sfcsANIMStatsANIMIndex
OBJECT-TYPE
The primary index which specifies which ANIM instance we are dealing with. This index is formatted like MIB II's Interface Index.
1.3.6.1.4.1.52.4.1.2.11.1.1.3.2.1.1.1INTEGERread-onlymandatory
sfcsANIMStatsRxCells
OBJECT-TYPE
Indicates the number of cells received from this ANIM's interfaces.
1.3.6.1.4.1.52.4.1.2.11.1.1.3.2.1.1.2OCTET STRINGread-onlymandatory
sfcsANIMStatsTxCells
OBJECT-TYPE
Indicates the number of cells transmitted from this ANIM's interfaces.
1.3.6.1.4.1.52.4.1.2.11.1.1.3.2.1.1.3OCTET STRINGread-onlymandatory
sfcsANIMPic
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3
sfcsANIMPicTable
OBJECT-TYPE
This table contains the PIC information for each SFCS ANIM instance.
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1not-accessiblemandatory
sfcsANIMPicEntry
OBJECT-TYPE
Each entry contains the SFCS PIC info for the SFCS instance.
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1not-accessiblemandatory
sfcsANIMPicSlot
OBJECT-TYPE
Specific slot which the module that realizes this PIC resides. If the PIC is associated with the chassis and not a specific module then this value will be 0.
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.1INTEGERread-onlymandatory
sfcsANIMPicIndex
OBJECT-TYPE
Uniquely identifies the instance of a PIC in a particular slot.
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.2INTEGERread-onlymandatory
sfcsANIMPicLocation
OBJECT-TYPE
Defines location of the PIC chip. This takes on any of the encoding values defined below for backplane, module, daughter board, brim.
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.3OBJECT IDENTIFIERread-onlymandatory
sfcsANIMPicStatus
OBJECT-TYPE
Provides the status of the specific PIC chip. the values are defined as follows: other(1) - firmware can not determine status present(2) - PIC seems to be functional notPresent(3) - PIC not found but expected checkSum(4) - A check sum error occured error(5) - An undefined error condition exists. limited(6) - A limited PIC implementation only type code information is present.
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.4INTEGER {other(1), present(2), notPresent(3), checkSum(4), error(5), limited(6)}read-onlymandatory
sfcsANIMPicVersion
OBJECT-TYPE
Reflects the version of the PIC implementation that this PIC conforms to. This has the format x.yy . If non-existent, this object will be set to all blanks(ascii 32).
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.5DisplayString (SIZE(2))read-onlymandatory
sfcsANIMPicModuleType
OBJECT-TYPE
Defines the standard module type value as defined in ctron-oids.
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.6OBJECT IDENTIFIERread-onlymandatory
sfcsANIMPicMfgPN
OBJECT-TYPE
Describes the manufacturing level part number of the module associated with this PIC. This information is encoded as follows: 7 Characters Part Number 2 Characters Rework Location. If any field of this object is non-existent, it will be set to all blanks(ascii 32).
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.7DisplayString (SIZE(9))read-onlymandatory
sfcsANIMPicMfgSN
OBJECT-TYPE
Describes the manufacturing level serial number of the module associated with this PIC. This information is encoded as follows: 3 bytes - Date code (year/week) 4 bytes - Serial number 2 bytes - Manufacture location 3 bytes - Board level revision If any field of this object is non-existent, it will be set to all blanks(ascii 32).
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.8DisplayString (SIZE(12))read-onlymandatory
sfcsANIMPicMfgPartNumb
OBJECT-TYPE
This object presents the part number portion of the ctPicMfgPN object. This object contains the same information however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32).
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.9DisplayString (SIZE(7))read-onlymandatory
sfcsANIMPicMfgSerialNumb
OBJECT-TYPE
This object presents the serial number portion of the ctPicMfgSN object. This object contains the same information however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32).
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.10DisplayString (SIZE(4))read-onlymandatory
sfcsANIMPicMfgReworkLocation
OBJECT-TYPE
The 2 character code that defines the location this module was last reworked. This object contains the same information as presented in ctPicMfgPN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32).
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.11DisplayString (SIZE(2))read-onlymandatory
sfcsANIMPicMfgMfgLocation
OBJECT-TYPE
The two character code that defines the location this module was manufactured at. This object contains the same information as presented in ctPicMfgSN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32).
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.12DisplayString (SIZE(2))read-onlymandatory
sfcsANIMPicMfgDateCode
OBJECT-TYPE
The 3 byte date code field when this module was last reworked. This is in year/week format. This object contains the same information as presented in ctPicMfgSN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32).
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.13DisplayString (SIZE(3))read-onlymandatory
sfcsANIMPicMfgRevisionCode
OBJECT-TYPE
The 3 character board level revision code field of this module. This object contains the same information as presented in ctPicMfgSN object however in a more human readable format. If non-existent, this object will be set to all blanks (ascii 32).
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.14DisplayString (SIZE(3))read-onlymandatory
sfcsANIMPicTLPN
OBJECT-TYPE
Describes the top level part number of the module associated with this PIC. This information is encoded as follows: 7 Characters Part Number 2 Characters Rework Location. If any field of this object is non-existent, it will be set to all blanks(ascii 32).
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.15DisplayString (SIZE(9))read-onlymandatory
sfcsANIMPicTLSN
OBJECT-TYPE
Describes the top level serial number of the module associated with this PIC. This information is encoded as follows: 3 bytes - Date code (year/week) 4 bytes - Serial number 2 bytes - Manufacture location 3 bytes - Top level revision If any field of this object is non-existent, it will be set to all blanks(ascii 32).
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.16DisplayString (SIZE(12))read-onlymandatory
sfcsANIMPicTLPartNumb
OBJECT-TYPE
This object presents the part number portion of the ctPicTLPN object. This object contains the same information however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32).
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.17DisplayString (SIZE(7))read-onlymandatory
sfcsANIMPicTLSerialNumb
OBJECT-TYPE
This object presents the serial number portion of the ctPicTLSN object. This object contains the same information however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32).
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.18DisplayString (SIZE(4))read-onlymandatory
sfcsANIMPicTLReworkLocation
OBJECT-TYPE
The 2 character code that defines the location this module was last reworked. This object contains the same information as presented in ctPicTLPN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32).
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.19DisplayString (SIZE(2))read-onlymandatory
sfcsANIMPicTLMfgLocation
OBJECT-TYPE
The two character code that defines the location this module was manufactured at. This object contains the same information as presented in ctPicTLSN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32).
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.20DisplayString (SIZE(2))read-onlymandatory
sfcsANIMPicTLDateCode
OBJECT-TYPE
The 3 byte date code field when this module was last reworked. This is in year/week format. This object contains the same information as presented in ctPicTLSN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32).
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.21DisplayString (SIZE(3))read-onlymandatory
sfcsANIMPicTLRevisionCode
OBJECT-TYPE
The 3 character top level revision code field of this module. This object contains the same information as presented in ctPicTLSN object however in a more human readable format. If non-existent, this object will be set to all blanks (ascii 32).
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.22DisplayString (SIZE(3))read-onlymandatory
sfcsANIMPicTLPcbRevision
OBJECT-TYPE
Defines the Cabletron revision of the art work for this module. If non-existent, this object will be set to all blanks(ascii 32).
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.23DisplayString (SIZE(8))read-onlymandatory
sfcsANIMPicMacAddr
OBJECT-TYPE
The base MAC address(ethernet format)assigned to the module. If this field is not used then it should have a value of a zero length string. If non-existent, this object will be set to all blanks(ascii 32).
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.24OCTET STRING (SIZE(0..6))read-onlymandatory
sfcsANIMPicNumbRsvdAddrs
OBJECT-TYPE
The number of reserved MAC addresses starting at the address as defined in ctPicMacAddr. If no MAC addresses are reserved this object should have a value of 0.
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.25INTEGERread-onlymandatory
sfcsANIMPicBoardLevelRevision
OBJECT-TYPE
Defines the Cabletron board level revision level code for this module. If non-existent, this object will be set to blanks (ascii 32).
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.26DisplayString (SIZE(3))read-onlymandatory
sfcsANIMPicModuleTypeString
OBJECT-TYPE
Describes the module associated with this PIC in a human readable format. If non-existent, this object will be set to blanks (ascii 32).
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.27DisplayString (SIZE(16))read-onlymandatory
sfcsANIMPicDcDcConverterType
OBJECT-TYPE
Describes the voltage of the installed DCDC Converter input and output lines. If the Module does not contain a DCDC Converter this object will be set to blanks (ascii 32).
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.28DisplayString (SIZE(12))read-onlymandatory
sfcsANIMPicDcDcConverterInputPower
OBJECT-TYPE
Describes the maximum allowed input power for the DCDC input line. If the Module does not contain a DCDC Converter this object will be set to blanks (ascii 32).
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.29DisplayString (SIZE(3))read-onlymandatory
sfcsANIMPicSmb1PromVersion
OBJECT-TYPE
Describes the current version of the SMB1 prom. If the Module does not contain an SMB1 prom this object will be set to blanks (ascii 32).
1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.30DisplayString (SIZE(8))read-onlymandatory
sfcsInterface
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.4
sfcsInterfaceConfig
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.4.1
sfcsInterfaceConfigTable
OBJECT-TYPE
This table contains the configuration information of each configured SFCS switch interface. If SFCS is not configured on a port, than an entry will not exist.
1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1not-accessiblemandatory
sfcsInterfaceConfigEntry
OBJECT-TYPE
Each entry specifies the SFCS configuration for the SFCS switch interface for which the entry exists.
1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1not-accessiblemandatory
sfcsInterfaceConfigInterfaceIndex
OBJECT-TYPE
The index which specifies which interface we are dealing with.
1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.1INTEGERread-onlymandatory
sfcsInterfaceConfigType
OBJECT-TYPE
Sets the type of interface access attribute for the SFCS interfaces. Access ports allow single user or shared access and perform statisics and control; network ports are equivalent to trunk ports with no access control; host management port indicates the (virtual) port to which the (internal) management agent is attached; host control port indicates the port to redirect non-management packets. other(1) access-port(2) network-port(3) host-mgmt-port(4) host-ctl-port(5)
1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.2INTEGER {other(1), access-port(2), network-port(3), host-mgmt-port(4), host-ctl-port(5)}read-onlydeprecated
sfcsInterfacePeakBufferUseage
OBJECT-TYPE
An accumulated snap shot of the current peak queue depth for the configured buffer queues. This information is obtained from a read/reset register.
1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.3INTEGER (0..100)read-onlymandatory
sfcsInterfaceConfigNumberOfQueues
OBJECT-TYPE
Indicates the number of priority queues configured on this interface.
1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.4INTEGERread-onlymandatory
sfcsInterfaceConfigSigStackID
OBJECT-TYPE
Indicates the user signalling stack ID for this interface.
1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.5INTEGERread-onlymandatory
sfcsInterfaceConfigClockingSource
OBJECT-TYPE
The interface clocking source.
1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.6INTEGER {local-anim-clock(1), mother-board-master-clock(2)}read-writemandatory
sfcsInterfaceStatistics
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.4.2
sfcsInterfaceStatsTable
OBJECT-TYPE
This table contains the cell counts for each SFCS switch interface.
1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1not-accessiblemandatory
sfcsInterfaceStatsEntry
OBJECT-TYPE
Specifies the SFCS cell counts for the SFCS interface for which this entry exists.
1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1not-accessiblemandatory
sfcsInterfaceStatsInterfaceIndex
OBJECT-TYPE
The index which specifies which interface we are dealing with.
1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.1INTEGERread-onlymandatory
sfcsInterfaceStatsRxErrors
OBJECT-TYPE
Indicates the number of receive path lookup invalid and out of range errors.
1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.2OCTET STRINGread-onlymandatory
sfcsInterfaceStatsVPILookupInvalidErrors
OBJECT-TYPE
Indicates the number of VPI lookup invalid and out of range errors.
1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.3OCTET STRINGread-onlymandatory
sfcsInterfaceStatsRxCnxLookupInvalidErrors
OBJECT-TYPE
Indicates the number of receive connection lookup invalid errors.
1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.4OCTET STRINGread-onlymandatory
sfcsInterfaceStatsRxCellCnt
OBJECT-TYPE
Indicates the number of receive cells on this interface.
1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.5OCTET STRINGread-onlymandatory
sfcsInterfaceStatsTxCellCnt
OBJECT-TYPE
Indicates the number of transmit cells on this interface.
1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.6OCTET STRINGread-onlymandatory
sfcsInterfaceStatsOverflowDropCellCnt
OBJECT-TYPE
Indicates the number of cells that were dropped due to queue overflows.
1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.7OCTET STRINGread-onlymandatory
sfcsQueue
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.5
sfcsQueueConfig
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.5.1
sfcsQueueConfigTable
OBJECT-TYPE
This table contains the configuration information for all queues on the SFCS.
1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1not-accessiblemandatory
sfcsQueueConfigEntry
OBJECT-TYPE
Each entry specifies the queue information for the SFCS switch for which the entry exists.
1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1not-accessiblemandatory
sfcsQueueConfigInterfaceIndex
OBJECT-TYPE
The index which specifies which interface we are dealing with.
1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.1INTEGERread-onlymandatory
sfcsQueueConfigQueueIndex
OBJECT-TYPE
The index which specifies which transmit queue we are dealing with.
1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.2INTEGERread-onlymandatory
sfcsQueueConfigQueueSize
OBJECT-TYPE
Indicates the size of the transmit queue for this queue instance.
1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.3INTEGERread-onlymandatory
sfcsQueueConfigQueueBandwidth
OBJECT-TYPE
Indicates the percentage of this interface's bandwidth utilized by this particular queue.
1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.4INTEGER (0..100)read-onlymandatory
sfcsQueueConfigClpDropThreshold
OBJECT-TYPE
Indicates the queue level to start dropping CLP=1 cells for this queue. This level is expressed as the percentage of this queue's size.
1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.5INTEGER (0..100)read-writemandatory
sfcsQueueConfigCongestionThreshold
OBJECT-TYPE
Indicates the level to consider this queue congested. This level is expressed as the percentage of this queue's size.
1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.6INTEGER (0..100)read-writemandatory
sfcsQueueConfigEFCILowThreshold
OBJECT-TYPE
Indicates the lower threshold used for EFCI for this queue instance. This level is expressed as the percentage of this queue's size.
1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.7INTEGER (0..100)read-writemandatory
sfcsQueueConfigRMThreshold
OBJECT-TYPE
Indicates the remote management queue threshold expressed as a percentage of the queue's size. When this level is hit, a management message is sent to the sender notifying it to slow down.
1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.8INTEGER (0..100)read-writemandatory
sfcsQueueConfigEPDThreshold
OBJECT-TYPE
Indicates the Early Packet Discard threshold expressed as a percentage of the queue's size. When this level is exceeded the Transmit ASIC starts to drop all cells entering this queue.
1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.9INTEGER (0..100)read-writemandatory
sfcsQueueStatistics
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.5.2
sfcsQueueStatsTable
OBJECT-TYPE
This table contains the statistics information for all queues on the SFCS.
1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1not-accessiblemandatory
sfcsQueueStatsEntry
OBJECT-TYPE
Each entry specifies the queue information for the SFCS switch for which the entry exists.
1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1not-accessiblemandatory
sfcsQueueStatsInterfaceIndex
OBJECT-TYPE
The index which specifies which interface we are dealing with.
1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.1INTEGERread-onlymandatory
sfcsQueueStatsQueue
OBJECT-TYPE
The index which specifies which queue we are dealing with.
1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.2INTEGERread-onlymandatory
sfcsQueueStatsTxClpCellsDiscarded
OBJECT-TYPE
Indicates the number of cells with CLP=1 that were discarded for this queue instance.
1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.3OCTET STRINGread-onlymandatory
sfcsQueueStatsTxCellsDropped
OBJECT-TYPE
Indicates the number of cells that overflowed the buffer for this queue instance.
1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.4OCTET STRINGread-onlymandatory
sfcsQueueStatsQueuePeakLevel
OBJECT-TYPE
Indicates the peak level since last read for this queue instance.
1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.5INTEGERread-onlymandatory
sfcsQueueStatsTxCellCnt
OBJECT-TYPE
Indicates the transmit cell count on a per queue basis. A value of zero indicates not available
1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.6OCTET STRINGread-onlymandatory
sfcsConnection
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.7
sfcsConnectionConfig
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.7.1
sfcsCnxCfgTable
OBJECT-TYPE
This table contains the connection configuration information.
1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1not-accessiblemandatory
sfcsCnxCfgEntry
OBJECT-TYPE
Each entry specifies the connection configuration information for the SFCS switch connection instance.
1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1not-accessiblemandatory
sfcsCnxCfgCrossConnectIndex
OBJECT-TYPE
A unique value to identify this cross-connect.
1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.1INTEGERread-onlymandatory
sfcsCnxCfgCrossConnectLowIfIndex
OBJECT-TYPE
The value of this object is equal to the low MIB II IfIndex value of the ATM interface port for this cross-connect.
1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.2INTEGERread-onlymandatory
sfcsCnxCfgCrossConnectLowVpi
OBJECT-TYPE
The value of this object is equal to the low VPI value at the ATM interface associated with the cross-connect that is identified by sfcsCnxCfgCrossConnectIndex.
1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.3INTEGER (0..4095)read-onlymandatory
sfcsCnxCfgCrossConnectLowVci
OBJECT-TYPE
The value of this object is equal to the low VCI value at the ATM interface associated with this cross-connect that is identified by sfcsCnxCfgCrossConnectIndex.
1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.4INTEGER (0..65535)read-onlymandatory
sfcsCnxCfgCrossConnectHighIfIndex
OBJECT-TYPE
The value of this object is equal to the high MIB II IfIndex value of the ATM interface port for this cross-connect.
1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.5INTEGERread-onlymandatory
sfcsCnxCfgCrossConnectHighVpi
OBJECT-TYPE
The value of this object is equal to the high VPI value at the ATM interface associated with the cross-connect that is identified by sfcsCnxCfgCrossConnectIndex.
1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.6INTEGER (0..4095)read-onlymandatory
sfcsCnxCfgCrossConnectHighVci
OBJECT-TYPE
The value of this object is equal to the high VCI value at the ATM interface associated with this cross-connect that is identified by sfcsCnxCfgCrossConnectIndex.
1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.7INTEGER (0..65535)read-onlymandatory
sfcsCnxCfgType
OBJECT-TYPE
Indicates the connection type for this VC. point-to-point-vpl(1) point-to-mpoint-vpl(2) mpoint-to-mpoint-vpl(3) point-to-point-vcl(4) point-to-mpoint-vcl(5) mpoint-to-mpoint-vcl(6)
1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.8INTEGER {point-to-point-vpl(1), point-to-mpoint-vpl(2), mpoint-to-mpoint-vpl(3), point-to-point-vcl(4), point-to-mpoint-vcl(5), mpoint-to-mpoint-vcl(6)}read-onlymandatory
sfcsCnxCfgTmType
OBJECT-TYPE
Indicates the type of traffic management used on this VC. other (1) efci (2) er (3)
1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.9INTEGER {other(1), efci(2), er(3)}read-onlymandatory
sfcsCnxCfgUPCEnable
OBJECT-TYPE
Indicates whether or not UPC policing is enabled on this VC. A VC can be bi-directional or uni-directional. Due to this, the UPC bit is a masking based on directionality. Where direction is in terms of high interface (H) and low interface (L). (Where not specified, assume disabled.) L to H UPC enabled(1) L to H Tagging enabled(2) L to H UPC/Tagging enabled(3) H to L UPC enabled(4) L to H UPC enabled & H to L UPC enabled(5) L to H Tagging enabled & H to L UPC enabled(6) L to H UPC/Tagging enabled & H to L UPC enabled(7) H to L Tagging enabled(8) L to H UPC enabled & H to L Tagging enabled(9) L to H Tagging enabled & H to L Tagging enabled(10) L to H UPC/Tagging enabled & H to L Tagging enabled(11) H to L UPC/Tagging enabled(12) L to H UPC enabled & H to L UPC/Tagging enabled(13) L to H Tagging enabled and H to L UPC/Tagging enabled(14) L to H UPC/Tagging enabled & H to L UPC/Tagging enabled(15)
1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.10INTEGER {l-h-upc-enabled(1), l-h-tag-enabled(2), l-h-upc-tag-enabled(3), h-l-upc-enabled(4), l-h-upc-and-h-l-upc-enabled(5), l-h-Tag-and-h-l-upc-enabled(6), l-h-upc-tag-and-h-l-upc-enabled(7), h-l-tag-enabled(8), l-h-upc-and-h-l-tag-enabled(9), l-h-tag-and-h-l-tag-enabled(10), l-h-upc-tag-and-h-l-tag-enabled(11), h-l-upc-tag-enabled(12), l-h-upc-and-h-l-upc-tag-enabled(13), l-h-tag-and-h-l-upc-tag-enabled(14), l-h-upc-tag-and-h-l-upc-tag-enabled(15)}read-onlymandatory
sfcsCnxCfgStatsEnable
OBJECT-TYPE
Indicates whether statistics will be kept on this VC. enabled(1) disabled(2) other(3)
1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.11INTEGER {enabled(1), disabled(2), other(3)}read-onlymandatory
sfcsCnxCfgStatsTableCounterSizes
OBJECT-TYPE
Indicates the size of the drop counter for this VC. thirtytwobittagcounter (1) thirtytwobitdropcounter (2) sixteenbiteachcounter (3)
1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.12INTEGER {thirtytwobittagcounter(1), thirtytwobitdropcounter(2), sixteenbiteachcounter(3)}read-onlymandatory
sfcsCnxCfgOwner
OBJECT-TYPE
Indicates the owner of this cross connect. other(1) own(2) dontown(3)
1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.13INTEGER {other(1), own(2), dontown(3)}read-onlymandatory
sfcsConnectionStatistics
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.7.2
sfcsCnxStatsTable
OBJECT-TYPE
This table contains the connection configuration information.
1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1not-accessiblemandatory
sfcsCnxStatsEntry
OBJECT-TYPE
Each entry specifies the connection statistics information for the SFCS switch connection instance.
1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1not-accessiblemandatory
sfcsCnxStatsCrossConnectIndex
OBJECT-TYPE
A unique value to identify this cross-connect.
1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.1INTEGERread-onlymandatory
sfcsCnxStatsCrossConnectLowIfIndex
OBJECT-TYPE
The value of this object is equal to the low MIB II IfIndex value of the ATM interface port for this cross-connect.
1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.2INTEGERread-onlymandatory
sfcsCnxStatsCrossConnectLowVpi
OBJECT-TYPE
The value of this object is equal to the low VPI value at the ATM interface associated with the cross-connect that is identified by sfcsCnxStatsCrossConnectIndex.
1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.3INTEGER (0..4095)read-onlymandatory
sfcsCnxStatsCrossConnectLowVci
OBJECT-TYPE
The value of this object is equal to the low VCI value at the ATM interface associated with this cross-connect that is identified by sfcsCnxStatsCrossConnectIndex.
1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.4INTEGER (0..65535)read-onlymandatory
sfcsCnxStatsCrossConnectHighIfIndex
OBJECT-TYPE
The value of this object is equal to the high MIB II IfIndex value of the ATM interface port for this cross-connect.
1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.5INTEGERread-onlymandatory
sfcsCnxStatsCrossConnectHighVpi
OBJECT-TYPE
The value of this object is equal to the high VPI value at the ATM interface associated with the cross-connect that is identified by sfcsCnxStatsCrossConnectIndex.
1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.6INTEGER (0..4095)read-onlymandatory
sfcsCnxStatsCrossConnectHighVci
OBJECT-TYPE
The value of this object is equal to the high VCI value at the ATM interface associated with this cross-connect that is identified by sfcsCnxStatsCrossConnectIndex.
1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.7INTEGER (0..65535)read-onlymandatory
sfcsCnxStatsLoToHiHTxCells
OBJECT-TYPE
Indicates the transmitted cell count for this connection. This entry specifies the count from the low port/vpi/vci to the high port/vpi/vci
1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.8OCTET STRINGread-onlymandatory
sfcsCnxStatsLoToHiDroppedCells
OBJECT-TYPE
Indicates the dropped cell count for this connection instance. This entry specifies the count from the low port/vpi/vci to the high port/vpi/vci.
1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.9OCTET STRINGread-onlymandatory
sfcsCnxStatsLoToHiTaggedCells
OBJECT-TYPE
Indicates the tagged cell count for this connection instance. This entry specifies the count from the low port/vpi/vci to the high port/vpi/vci.
1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.10OCTET STRINGread-onlymandatory
sfcsCnxStatsHiToLoHTxCells
OBJECT-TYPE
Indicates the transmitted cell count for this connection. This entry specifies the count from the high port/vpi/vci to the low port/vpi/vci
1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.11OCTET STRINGread-onlymandatory
sfcsCnxStatsHiToLoDroppedCells
OBJECT-TYPE
Indicates the dropped cell count for this connection instance. This entry specifies the count from the high port/vpi/vci to the low port/vpi/vci.
1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.12OCTET STRINGread-onlymandatory
sfcsCnxStatsHiToLoTaggedCells
OBJECT-TYPE
Indicates the tagged cell count for this connection instance. This entry specifies the count from the high port/vpi/vci to the low port/vpi/vci.
1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.13OCTET STRINGread-onlymandatory
sfcsConnectionError
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.7.3
sfcsCnxErrorTable
OBJECT-TYPE
This table contains the connection error information supplied by the atmAPI mib.
1.3.6.1.4.1.52.4.1.2.11.1.1.7.3.1not-accessiblemandatory
sfcsCnxErrorEntry
OBJECT-TYPE
A list of VCC connection request failures. This table is indexed the same way as the atmVcCrossConnectTable in the AToM mib.
1.3.6.1.4.1.52.4.1.2.11.1.1.7.3.1.1not-accessiblemandatory
sfcsCnxErrorCode
OBJECT-TYPE
Specifies the error reason for failure of the connection setup. 01 fatal_error 02 moe_table_out_of_range 03 moe_mem_not_allocated 04 mem_fetch_double_reqst 05 lo_port_invalid 06 lo_port_locked 07 lo_vpi_invalid 08 lo_vci_invalid 09 hi_port_invalid 10 hi_port_locked 11 hi_vpi_invalid 12 hi_vci_invalid 13 trfc_desc_l2h_invalid 14 trfc_desc_h2l_invalid 15 ccid_invalid 16 ccid_not_assigned 17 atm_api_type_invalid 18 atm_api_verb_invalid 19 pt_to_pt_over_write_reqst 20 pt_reqst_over_mpt_conn 21 mask_table_full 22 duplicate_request 23 moe_table_out_of_memory 24 vpi0_non_term_reqst 25 hardware_out_of_heap 26 tx_conn_table_out_of_mem 27 tx_conn_table_time_out 28 ctm_communication_error 29 connection_table_out_of_sync 30 invalid_connection_entry 31 ctm_resource_alloc_error 32 front_panel_bandwidth_alloc_error 33 ccid_in_use
1.3.6.1.4.1.52.4.1.2.11.1.1.7.3.1.1.1OCTET STRINGread-onlymandatory
sfcsCnxErrorTimeStamp
OBJECT-TYPE
Indicates the value of the sysUpTime when this connection request failed. We will support this field only if the element management uses this table.
1.3.6.1.4.1.52.4.1.2.11.1.1.7.3.1.1.2TimeTicksread-onlymandatory
sfcsCnxErrorRowStatus
OBJECT-TYPE
The administrative control of this entry. The owner could delete this entry after reading it, to prevent this table from growing too big. other (1) inactive (2) active (3) delete (4)
1.3.6.1.4.1.52.4.1.2.11.1.1.7.3.1.1.3INTEGER {other(1), inactive(2), active(3), delete(4)}read-writemandatory
sfcsConnectionAPI
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.8
sfcsCnxAPIEntry
OBJECT-TYPE
The connection API leaf provides a method for contool for creating PVCs. This always returns a value of 0.
1.3.6.1.4.1.52.4.1.2.11.1.1.8.1INTEGER (1)read-onlymandatory
sfcsCTM
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.9
sfcsCTMInterfaceConfig
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.9.1
sfcsCTMInterfaceConfigTable
OBJECT-TYPE
This table contains the configuration information of each configured SHEMP interface. If SFCS is not configured on a port, than an entry will not exist.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1not-accessiblemandatory
sfcsCTMInterfaceConfigEntry
OBJECT-TYPE
Each entry specifies the SFCS configuration for the SFCS switch interface for which the entry exists.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1not-accessiblemandatory
sfcsCTMInterfaceConfigInterfaceIndex
OBJECT-TYPE
The index which specifies which interface we are dealing with.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.1INTEGERread-onlymandatory
sfcsCTMInterfaceConfigType
OBJECT-TYPE
Sets the type of interface access attribute for the SFCS interfaces. Access ports allow single user or shared access and perform statisics and control; network ports are equivalent to trunk ports with no access control; host management port indicates the (virtual) port to which the (internal) management agent is attached; host control port indicates the port to redirect non-management packets. other(1), access-port(2), network-port(3), host-mgmt-port(4), host-ctl-port(5)
1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.2INTEGER {other(1), access-port(2), network-port(3), host-mgmt-port(4), host-ctl-port(5)}read-onlymandatory
sfcsCTMInterfacePeakBufferUseage
OBJECT-TYPE
Indicates the number of cells in transmit buffer memory.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.3INTEGER (0..100)read-onlymandatory
sfcsCTMInterfaceConfigNumberOfQueues
OBJECT-TYPE
Indicates the number of priority queues configured on this interface.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.4INTEGERread-onlymandatory
sfcsCTMInterfaceConfigSigStackID
OBJECT-TYPE
Indicates the user signalling stack ID for this interface.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.5INTEGERread-onlymandatory
sfcsCTMInterfaceConfigClocking
OBJECT-TYPE
The anim clocking source. one - use the generated-transmit-clock two - use the channel-recovered-clock three - use the system-master-clock four - option not supported by this interface
1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.6INTEGER {generated-transmit-clock(1), channel-recovered-clock(2), system-master-clock(3), not-supported(4)}read-writemandatory
sfcsCTMInterfaceConfigNextVPI
OBJECT-TYPE
Indicates the next vpi for this interface.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.7INTEGERread-onlymandatory
sfcsCTMInterfaceConfigNextVCI
OBJECT-TYPE
Indicates the next vci for this interface.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.8INTEGERread-onlymandatory
sfcsCTMInterfaceStatistics
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.9.2
sfcsCTMInterfaceStatsTable
OBJECT-TYPE
This table contains the cell counts for each SFCS switch interface.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1not-accessiblemandatory
sfcsCTMInterfaceStatsEntry
OBJECT-TYPE
Specifies the SFCS cell counts for the SFCS interface for which this entry exists.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1not-accessiblemandatory
sfcsCTMInterfaceStatsInterfaceIndex
OBJECT-TYPE
The index which specifies which interface we are dealing with.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.1INTEGERread-onlymandatory
sfcsCTMInterfaceStatsRxErrors
OBJECT-TYPE
Indicates the number of receive path lookup invalid and out of range errors.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.2OCTET STRINGread-onlymandatory
sfcsCTMInterfaceStatsVPILookupInvalidErrors
OBJECT-TYPE
Indicates the number of VPI lookup invalid and out of range errors.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.3OCTET STRINGread-onlymandatory
sfcsCTMInterfaceStatsRxCnxLookupInvalidErrors
OBJECT-TYPE
Indicates the number of receive connection lookup invalid errors.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.4OCTET STRINGread-onlymandatory
sfcsCTMInterfaceStatsRxCellCnt
OBJECT-TYPE
Indicates the number of receive cells on this interface.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.7OCTET STRINGread-onlymandatory
sfcsCTMInterfaceStatsTxCellCnt
OBJECT-TYPE
Indicates the number of transmit cells on this interface.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.8OCTET STRINGread-onlymandatory
sfcsCTMInterfaceStatsOverflowDropCellCnt
OBJECT-TYPE
Indicates the number of cells that were dropped due to queue overflows.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.9OCTET STRINGread-onlymandatory
sfcsCTMQueueConfig
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.9.3
sfcsCTMQueueConfigTable
OBJECT-TYPE
This table contains the configuration information for all queues on the SFCS.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1not-accessiblemandatory
sfcsCTMQueueConfigEntry
OBJECT-TYPE
Each entry specifies the queue information for the SFCS switch for which the entry exists.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1not-accessiblemandatory
sfcsCTMQueueConfigInterfaceIndex
OBJECT-TYPE
The index which specifies which interface we are dealing with.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.1INTEGERread-onlymandatory
sfcsCTMQueueConfigQueueIndex
OBJECT-TYPE
The index which specifies which transmit queue we are dealing with.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.2INTEGERread-onlymandatory
sfcsCTMQueueConfigQueueSize
OBJECT-TYPE
Indicates the size of the transmit queue for this queue instance.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.3INTEGERread-writemandatory
sfcsCTMQueueConfigQueueBandwidth
OBJECT-TYPE
Indicates the percentage of this interface's bandwidth utilized by this particular queue.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.4INTEGER (0..100)read-writemandatory
sfcsCTMQueueConfigClpDropThreshold
OBJECT-TYPE
Indicates the queue level to start dropping CLP=1 cells for this queue. This level is expressed as the percentage of this queue's size.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.5INTEGER (0..100)read-writemandatory
sfcsCTMQueueConfigCongestionThreshold
OBJECT-TYPE
Indicates the level to consider this queue congested. This level is expressed as the percentage of this queue's size.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.6INTEGER (0..100)read-writemandatory
sfcsCTMQueueConfigEFCILowThreshold
OBJECT-TYPE
Indicates the lower threshold used for EFCI for this queue instance. This level is expressed as the percentage of this queue's size.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.7INTEGER (0..100)read-writemandatory
sfcsCTMQueueConfigRMThreshold
OBJECT-TYPE
Indicates the remote management queue threshold expressed as a percentage of the queue's size. When this level is hit, a management message is sent to the sender notifying it to slow down.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.8INTEGER (0..100)read-writemandatory
sfcsCTMQueueStatistics
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.9.4
sfcsCTMQueueStatsTable
OBJECT-TYPE
This table contains the statistics information for all queues on the SFCS.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1not-accessiblemandatory
sfcsCTMQueueStatsEntry
OBJECT-TYPE
Each entry specifies the queue information for the SFCS switch for which the entry exists.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1not-accessiblemandatory
sfcsCTMQueueStatsInterfaceIndex
OBJECT-TYPE
The index which specifies which interface we are dealing with.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.1INTEGERread-onlymandatory
sfcsCTMQueueStatsQueue
OBJECT-TYPE
The index which specifies which queue we are dealing with.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.2INTEGERread-onlymandatory
sfcsCTMQueueStatsTxClpCellsDiscarded
OBJECT-TYPE
Indicates the number of cells with CLP=1 that were discarded for this queue instance.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.3OCTET STRINGread-onlymandatory
sfcsCTMQueueStatsTxCellsDropped
OBJECT-TYPE
Indicates the number of cells that overflowed the buffer for this queue instance.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.4OCTET STRINGread-onlymandatory
sfcsCTMQueueStatsQueuePeakLevel
OBJECT-TYPE
Indicates the peak level since last read for this queue instance.
1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.5INTEGERread-onlymandatory
sfcsCTMQueueStatsTxCellCnt
OBJECT-TYPE
Indicates the transmit cell count on a per queue basis. A value of zero indicates not available
1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.6OCTET STRINGread-onlymandatory
sfcsBWMgr
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.12
sfcsBwNims
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.12.1
sfcsBwNimsTable
OBJECT-TYPE
This table contains the Nim Oid and the Nim Administrative Status reading functions.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1not-accessiblemandatory
sfcsBwNimsEntry
OBJECT-TYPE
Each entry contains a Nim Oid and the Nim Administrative Status.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1not-accessiblemandatory
sfcsBwNimsIndex
OBJECT-TYPE
This index specifies which NIM we are dealing with. This reference is in the same format as MIB II's Interface index.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1.1INTEGERread-onlymandatory
sfcsBwNimsAdminStatus
OBJECT-TYPE
Indicates the administrative status of this Nim. 10 - Active 20 - Inactive
1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1.2INTEGERread-writemandatory
sfcsBWNimsBuffCount
OBJECT-TYPE
The number of transmit buffers for this NIM
1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1.3INTEGERread-onlymandatory
sfcsBWNimsPortCount
OBJECT-TYPE
The number of ports for this NIM
1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1.4INTEGERread-onlymandatory
sfcsBWNimsPrioCount
OBJECT-TYPE
The number of priority queues for this NIM
1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1.5INTEGERread-onlymandatory
sfcsBwPorts
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.12.2
sfcsBwPortsTable
OBJECT-TYPE
This table contains the Port Oid, Port Administrative Status and the forward/reverse physical bandwidth reading functions.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1not-accessiblemandatory
sfcsBwPortsEntry
OBJECT-TYPE
Each entry contains the Port Oid, Port Administrative Status and the forward/reverse physical bandwidth.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1not-accessiblemandatory
sfcsBwPortsIndex
OBJECT-TYPE
This index specifies which Port we are dealing with. This reference is in the same format as MIB II's Interface index.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.1INTEGERread-onlymandatory
sfcsBwPortsAdminStatus
OBJECT-TYPE
Indicates the administrative status of this Port. 10 - Active 20 - Inactive
1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.2INTEGERread-writemandatory
sfcsBwPortsPhysBwFwd
OBJECT-TYPE
This is the forward physical bandwidth of the port in cells/sec.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.3INTEGERread-onlymandatory
sfcsBwPortsPhysBwRev
OBJECT-TYPE
This is the reverse physical bandwidth of the port in cells/sec.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.4INTEGERread-onlymandatory
sfcsBwPortsZone
OBJECT-TYPE
The range of the current bw operational point for this port. If a value has never been set the value will be -1.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.5INTEGERread-onlymandatory
sfcsBwPortsMetric
OBJECT-TYPE
The current bw operational point for this port. If a value has never been set the value will be -1.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.6INTEGERread-onlymandatory
sfcsBwPortPools
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3
sfcsBwPortPoolLimitsTable
OBJECT-TYPE
This table contains
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1not-accessiblemandatory
sfcsBwPortPoolLimitsEntry
OBJECT-TYPE
Each entry contains
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1not-accessiblemandatory
sfcsBwPortPoolLimitsIndex
OBJECT-TYPE
This index specifies which Port we are dealing with. This reference is in the same format as MIB II's Interface index.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.1INTEGERread-onlymandatory
sfcsBwPortPoolLimitsPoolIndex
OBJECT-TYPE
This index specifies which Pool within Port we are dealing with. This reference is in the same format as MIB II's Interface index.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.2INTEGERread-onlymandatory
sfcsBwPortPoolLimitsMaxAllocBwFwd
OBJECT-TYPE
Upper Limit for BW to be allocated forward direction. It is defaulted to the physical BW and is set by administrative action. Can't be set to a value greater than physical BW
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.3INTEGERread-writemandatory
sfcsBwPortPoolLimitsMaxAllocBwRev
OBJECT-TYPE
Upper Limit for BW to be allocated reverse direction. It is defaulted to the physical BW and is set by administrative action. Can't be set to a value greater than physical BW
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.4INTEGERread-writemandatory
sfcsBwPortPoolLimitsBwAllocStrat
OBJECT-TYPE
Determines which of 3 sets of formulas will be used for computing the amount of variable bandwidth to be allocated. Conservative allocates the full amount of variable bandwidth, Moderate allocates approximately half of the variable bandwidth, Liberal supports very aggressive allocation and should only be used with caution. Conservative is the default.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.5INTEGERread-writemandatory
sfcsBwPortPoolLimitsBwConstant
OBJECT-TYPE
A ratio used in formulas for computing the amount of variable bandwidth to be allocated. Valid values are 1-255 which is the numerator of a fraction whose fixed denominator is 256. Thus the value 255 is really 255/256 the most conservative value; the value 1 is really 1/256 the most liberal value; the value 128 is really 128/256 or 50%. The default is 50%.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.6INTEGERread-writemandatory
sfcsBwPortPoolLimitsCBRLimitFwd
OBJECT-TYPE
A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to CBR. The values are 1-255. For a more detailed description of value useage see sfcsBwPortPoolLimitsBwConstant. Total of all service classes for a given direction should not exceed 256. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.7INTEGERread-writemandatory
sfcsBwPortPoolLimitsCBRLimitRev
OBJECT-TYPE
A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to CBR. The values are 1-255. For a more detailed description of value useage see sfcsBwPortPoolLimitsBwConstant. Total of all service classes for a given direction should not exceed 256. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.8INTEGERread-writemandatory
sfcsBwPortPoolLimitsABRLimitFwd
OBJECT-TYPE
A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to ABR. The values are 1-255. For a more detailed description of value useage see sfcsBwPortPoolLimitsBwConstant. Total of all service classes for a given direction should not exceed 256. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.9INTEGERread-writemandatory
sfcsBwPortPoolLimitsABRLimitRev
OBJECT-TYPE
A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to ABR. The values are 1-255. For a more detailed description of value useage see sfcsBwPortPoolLimitsBwConstant. Total of all service classes for a given direction should not exceed 256. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.10INTEGERread-writemandatory
sfcsBwPortPoolLimitsVBRLimitFwd
OBJECT-TYPE
A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to VBR. The values are 1-255. For a more detailed description of value useage see sfcsBwPortPoolLimitsBwConstant. Total of all service classes for a given direction should not exceed 256. (If it has never been set, the value will be -1.) WARNING - Setting this limit to an arbitrarily low value may cause the switch to become inoperable as an SVC switch. PNNI establishes VBR connections for switch to switch communications. If an arbitrarily low limit is established, it may preclude PNNI inter-switch operability.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.11INTEGERread-writemandatory
sfcsBwPortPoolLimitsVBRLimitRev
OBJECT-TYPE
A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to VBR. The values are 1-255. For a more detailed description of value useage see sfcsBwPortPoolLimitsBwConstant. Total of all service classes for a given direction should not exceed 256. (If it has never been set, the value will be -1.) WARNING - Setting this limit to an arbitrarily low value may cause the switch to become inoperable as an SVC switch. PNNI establishes VBR connections for switch to switch communications. If an arbitrarily low limit is established, it may preclude PNNI inter-switch operability.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.12INTEGERread-writemandatory
sfcsBwPortPoolLimitsUBRLimitFwd
OBJECT-TYPE
A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to UBR. The values are 1-255. For a more detailed description of value useage see sfcsBwPortPoolLimitsBwConstant. Total of all service classes for a given direction should not exceed 256. (If it has never been set, the value will be -1.) WARNING - Setting this limit to an arbitrarily low value may cause the switch to become inoperable as an SVC switch. Many internal management functions use UBR connections to establish connections with neighboring switches for keep alive and discovery functions. If an arbitrarily low limit is established, it may preclude SVC inter-switch operability.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.13INTEGERread-writemandatory
sfcsBwPortPoolLimitsUBRLimitRev
OBJECT-TYPE
A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to UBR. The values are 1-255. For a more detailed description of value useage see sfcsBwPortPoolLimitsBwConstant. Total of all service classes for a given direction should not exceed 256. (If it has never been set, the value will be -1.) WARNING - Setting this limit to an arbitrarily low value may cause the switch to become inoperable as an SVC switch. Many internal management functions use UBR connections to establish connections with neighboring switches for keep alive and discovery functions. If an arbitrarily low limit is established, it may preclude SVC inter-switch operability.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.14INTEGERread-writemandatory
sfcsBwPortPoolLimitsUBRConnLimitFwd
OBJECT-TYPE
A Limit to the number of UBR connections which can be established through this port. The limit applies to both user connections and management connections. The default is no limit. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.15INTEGERread-writemandatory
sfcsBwPortPoolLimitsUBRConnLimitRev
OBJECT-TYPE
A Limit to the number of UBR connections which can be established through this port. The limit applies to both user connections and management connections. The default is no limit. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.16INTEGERread-writemandatory
sfcsBwPortPoolStatTable
OBJECT-TYPE
This table contains
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2not-accessiblemandatory
sfcsBwPortPoolStatEntry
OBJECT-TYPE
Each entry contains
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1not-accessiblemandatory
sfcsBwPortPoolStatsIndex
OBJECT-TYPE
This index specifies which Port we are dealing with. This reference is in the same format as MIB II's Interface index.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.1INTEGERread-onlymandatory
sfcsBwPortPoolStatsPoolIndex
OBJECT-TYPE
This index specifies which Pool within Port we are dealing with. This reference is in the same format as MIB II's Interface index.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.2INTEGERread-onlymandatory
sfcsBwPortPoolStatConnCntFwd
OBJECT-TYPE
The current total number of calls in the forward direction.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.3INTEGERread-onlymandatory
sfcsBwPortPoolStatConnCntRev
OBJECT-TYPE
The current total number of calls in the reverse direction.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.4INTEGERread-onlymandatory
sfcsBwPortPoolStatAllocBwFwd
OBJECT-TYPE
The current amount of allocated Bw in the forward direction.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.5INTEGERread-onlymandatory
sfcsBwPortPoolStatAllocBwRev
OBJECT-TYPE
The current amount of allocated Bw in the reverse direction.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.6INTEGERread-onlymandatory
sfcsBwPortPoolStatAvailBwFwd
OBJECT-TYPE
The current amount of available Bw in the forward direction.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.7INTEGERread-onlymandatory
sfcsBwPortPoolStatAvailBwRev
OBJECT-TYPE
The current amount of available Bw in the reverse direction.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.8INTEGERread-onlymandatory
sfcsBwPortPoolStatPeakBwFwd
OBJECT-TYPE
The peak amount of allocated Bw in the forward direction since the port was initialized OR the switch was reset.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.9INTEGERread-onlymandatory
sfcsBwPortPoolStatPeakBwRev
OBJECT-TYPE
The peak amount of allocated Bw in the reverse direction since the port was initialized OR the switch was reset.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.10INTEGERread-onlymandatory
sfcsBwPortPoolStatRejConnFwd
OBJECT-TYPE
The number of connections which were rejected because of insufficient forward bandwidth since the port was initialized or the switch was reset last.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.11INTEGERread-onlymandatory
sfcsBwPortPoolStatRejConnRev
OBJECT-TYPE
The number of connections which were rejected because of insufficient reverse bandwidth since the port was initialized or the switch was reset last.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.12INTEGERread-onlymandatory
sfcsBwPortPoolStatPrevAdverMAXCRFwd
OBJECT-TYPE
The amount of physical forward BW reported to PNNI in the latest reporting period.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.13INTEGERread-onlymandatory
sfcsBwPortPoolStatPrevAdverMAXCRRev
OBJECT-TYPE
The amount of physical reverse BW reported to PNNI in the latest reporting period.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.14INTEGERread-onlymandatory
sfcsBwPortPoolStatPrevAdverAvailCRFwd
OBJECT-TYPE
The amount of avail forward BW reported to PNNI in the latest reporting period.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.15INTEGERread-onlymandatory
sfcsBwPortPoolStatPrevAdverAvailCRRev
OBJECT-TYPE
The amount of avail reverse BW reported to PNNI in the latest reporting period.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.16INTEGERread-onlymandatory
sfcsBwPortPoolStatCBRConnCntFwd
OBJECT-TYPE
The number of currently established CBR connections for the forward direction.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.17INTEGERread-onlymandatory
sfcsBwPortPoolStatCBRConnCntRev
OBJECT-TYPE
The number of currently established CBR connections for the reverse direction.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.18INTEGERread-onlymandatory
sfcsBwPortPoolStatCBRConnRejFwd
OBJECT-TYPE
The number of CBR forward connections rejected since the port was initialized or the switch was reset last.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.19INTEGERread-onlymandatory
sfcsBwPortPoolStatCBRConnRejRev
OBJECT-TYPE
The number of CBR reverse connections rejected since the port was initialized or the switch was reset last.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.20INTEGERread-onlymandatory
sfcsBwPortPoolStatCBRAllocBwFwd
OBJECT-TYPE
The amount of forward allocated Bw that is CBR service class.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.21INTEGERread-onlymandatory
sfcsBwPortPoolStatCBRAllocBwRev
OBJECT-TYPE
The amount of reverse allocated Bw that is CBR service class.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.22INTEGERread-onlymandatory
sfcsBwPortPoolStatCBRAggPCRFwd
OBJECT-TYPE
The aggregated forward PCR for all established CBR connections.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.23INTEGERread-onlymandatory
sfcsBwPortPoolStatCBRAggPCRRev
OBJECT-TYPE
The aggregated reverse PCR for all established CBR connections.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.24INTEGERread-onlymandatory
sfcsBwPortPoolStatCBRPrevAdverMAXCTD
OBJECT-TYPE
The maxCTD for the forward direction reported to PNNI for the last update period for CBR service class.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.25INTEGERread-onlymandatory
sfcsBwPortPoolStatCBRPrevAdverCDV
OBJECT-TYPE
The CDV for the forward direction reported to PNNI for the last update period for CBR service class.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.26INTEGERread-onlymandatory
sfcsBwPortPoolStatABRConnCntFwd
OBJECT-TYPE
The number of currently established ABR connections for the forward direction.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.27INTEGERread-onlymandatory
sfcsBwPortPoolStatABRConnCntRev
OBJECT-TYPE
The number of currently established ABR connections for the reverse direction.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.28INTEGERread-onlymandatory
sfcsBwPortPoolStatABRConnRejFwd
OBJECT-TYPE
The number of ABR forward connections rejected since the port was initialized or the switch was reset last.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.29INTEGERread-onlymandatory
sfcsBwPortPoolStatABRConnRejRev
OBJECT-TYPE
The number of ABR reverse connections rejected since the port was initialized or the switch was reset last.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.30INTEGERread-onlymandatory
sfcsBwPortPoolStatABRAllocBwFwd
OBJECT-TYPE
The amount of forward allocated Bw that is ABR service class.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.31INTEGERread-onlymandatory
sfcsBwPortPoolStatABRAllocBwRev
OBJECT-TYPE
The amount of reverse allocated Bw that is ABR service class.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.32INTEGERread-onlymandatory
sfcsBwPortPoolStatABRAggPCRFwd
OBJECT-TYPE
The aggregated forward PCR for all established ABR connections.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.33INTEGERread-onlymandatory
sfcsBwPortPoolStatABRAggPCRRev
OBJECT-TYPE
The aggregated reverse PCR for all established ABR connections.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.34INTEGERread-onlymandatory
sfcsBwPortPoolStatABRPrevAdverMAXCTD
OBJECT-TYPE
The maxCTD for the forward direction reported to PNNI for the last update period for ABR service class.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.35INTEGERread-onlymandatory
sfcsBwPortPoolStatABRPrevAdverCDV
OBJECT-TYPE
The CDV for the forward direction reported to PNNI for the last update period for ABR service class.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.36INTEGERread-onlymandatory
sfcsBwPortPoolStatVBRConnCntFwd
OBJECT-TYPE
The number of currently established VBR connections for the forward direction.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.37INTEGERread-onlymandatory
sfcsBwPortPoolStatVBRConnCntRev
OBJECT-TYPE
The number of currently established VBR connections for the reverse direction.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.38INTEGERread-onlymandatory
sfcsBwPortPoolStatVBRConnRejFwd
OBJECT-TYPE
The number of VBR forward connections rejected since the port was initialized or the switch was reset last.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.39INTEGERread-onlymandatory
sfcsBwPortPoolStatVBRConnRejRev
OBJECT-TYPE
The number of VBR reverse connections rejected since the port was initialized or the switch was reset last.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.40INTEGERread-onlymandatory
sfcsBwPortPoolStatVBRAllocBwFwd
OBJECT-TYPE
The amount of forward allocated Bw that is VBR service class.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.41INTEGERread-onlymandatory
sfcsBwPortPoolStatVBRAllocBwRev
OBJECT-TYPE
The amount of reverse allocated Bw that is VBR service class.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.42INTEGERread-onlymandatory
sfcsBwPortPoolStatVBRAggPCRFwd
OBJECT-TYPE
The aggregated forward PCR for all established VBR connections.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.43INTEGERread-onlymandatory
sfcsBwPortPoolStatVBRAggPCRRev
OBJECT-TYPE
The aggregated reverse PCR for all established VBR connections.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.44INTEGERread-onlymandatory
sfcsBwPortPoolStatVBRPrevAdverMAXCTD
OBJECT-TYPE
The maxCTD for the forward direction reported to PNNI for the last update period for VBR service class.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.45INTEGERread-onlymandatory
sfcsBwPortPoolStatVBRPrevAdverCDV
OBJECT-TYPE
The CDV for the forward direction reported to PNNI for the last update period for VBR service class.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.46INTEGERread-onlymandatory
sfcsBwPortPoolStatUBRConnCntFwd
OBJECT-TYPE
The number of currently established UBR connections for the forward direction.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.47INTEGERread-onlymandatory
sfcsBwPortPoolStatUBRConnCntRev
OBJECT-TYPE
The number of currently established UBR connections for the reverse direction.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.48INTEGERread-onlymandatory
sfcsBwPortPoolStatUBRConnRejFwd
OBJECT-TYPE
The number of UBR forward connections rejected since the port was initialized or the switch was reset last.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.49INTEGERread-onlymandatory
sfcsBwPortPoolStatUBRConnRejRev
OBJECT-TYPE
The number of UBR reverse connections rejected since the port was initialized or the switch was reset last.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.50INTEGERread-onlymandatory
sfcsBwPortPoolStatUBRAllocBwFwd
OBJECT-TYPE
The amount of forward allocated Bw that is UBR service class.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.51INTEGERread-onlymandatory
sfcsBwPortPoolStatUBRAllocBwRev
OBJECT-TYPE
The amount of reverse allocated Bw that is UBR service class.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.52INTEGERread-onlymandatory
sfcsBwPortPoolStatUBRAggPCRFwd
OBJECT-TYPE
The aggregated forward PCR for all established UBR connections.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.53INTEGERread-onlymandatory
sfcsBwPortPoolStatUBRAggPCRRev
OBJECT-TYPE
The aggregated reverse PCR for all established UBR connections.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.54INTEGERread-onlymandatory
sfcsBwPortPoolStatUBRPrevAdverMAXCTD
OBJECT-TYPE
The maxCTD for the forward direction reported to PNNI for the last update period for UBR service class.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.55INTEGERread-onlymandatory
sfcsBwPortPoolStatUBRPrevAdverCDV
OBJECT-TYPE
The CDV for the forward direction reported to PNNI for the last update period for UBR service class.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.56INTEGERread-onlymandatory
sfcsBwPortPoolTrapMgmtTable
OBJECT-TYPE
This table contains
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3not-accessiblemandatory
sfcsBwPortPoolTrapMgmtEntry
OBJECT-TYPE
Each entry contains
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1not-accessiblemandatory
sfcsBwPortPoolTrapMgmtIndex
OBJECT-TYPE
This index specifies which Port we are dealing with. This reference is in the same format as MIB II's Interface index.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.1INTEGERread-onlymandatory
sfcsBwPortPoolTrapMgmtPoolIndex
OBJECT-TYPE
This index specifies which Pool within Port we are dealing with. This reference is in the same format as MIB II's Interface index. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.2INTEGERread-onlymandatory
sfcsBwPortPoolTrapMgmtAllocBwTholdHiFwd
OBJECT-TYPE
The upper threshold for the Alloc BW fwd trap. When an allocation causes the currently allocated bw to exceed this value the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.3INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtAllocBwTholdHiRev
OBJECT-TYPE
The upper threshold for the Alloc BW rev trap. When an allocation causes the currently allocated bw to exceed this value the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.4INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtAllocBwTholdLoFwd
OBJECT-TYPE
The lower threshold for the Alloc BW fwd trap. When an allocation causes the currently allocated bw be below this value the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.5INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtAllocBwTholdLoRev
OBJECT-TYPE
The lower threshold for the Alloc BW rev trap. When an allocation causes the currently allocated bw be below this value the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.6INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtPeakBwTholdFwd
OBJECT-TYPE
The upper threshold for the Peak BW fwd trap. When an allocation causes the allocated BW to exceed this value the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.7INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtPeakBwTholdRev
OBJECT-TYPE
The upper threshold for the Peak BW rev trap. When an allocation causes the allocated BW to exceed this value the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.8INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtHoldDownTime
OBJECT-TYPE
The time between traps of the same type. If a trap of a particular type is generated for a particular port, another of that type for that port will not be generated until the hold down time has expired. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.9INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtCBRConnCntTholdHiFwd
OBJECT-TYPE
The upper threshold for the CBR connection count Fwd trap. When an allocation causes the CBR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.10INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtCBRConnCntTholdHiRev
OBJECT-TYPE
The upper threshold for the CBR connection count Rev trap. When an allocation causes the CBR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.11INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtCBRConnCntTholdLoFwd
OBJECT-TYPE
The lower threshold for the CBR connection count Fwd trap. When an allocation causes the CBR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.12INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtCBRConnCntTholdLoRev
OBJECT-TYPE
The lower threshold for the CBR connection count Rev trap. When an allocation causes the CBR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.13INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtCBRAllocBwTholdHiFwd
OBJECT-TYPE
The upper threshold for the CBR Allocated Bw Fwd trap. When an allocation causes the CBR Allocated Bw to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.14INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtCBRAllocBwTholdHiRev
OBJECT-TYPE
The upper threshold for the CBR connection count Rev trap. When an allocation causes the CBR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.15INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtCBRAllocBwTholdLoFwd
OBJECT-TYPE
The lower threshold for the CBR Allocated Bw Fwd trap. When an allocation causes the CBR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.16INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtCBRAllocBwTholdLoRev
OBJECT-TYPE
The lower threshold for the CBR Allocated Bw Rev trap. When an allocation causes the CBR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.17INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtABRConnCntTholdHiFwd
OBJECT-TYPE
The upper threshold for the ABR connection count Fwd trap. When an allocation causes the ABR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.18INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtABRConnCntTholdHiRev
OBJECT-TYPE
The upper threshold for the ABR connection count Rev trap. When an allocation causes the ABR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.19INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtABRConnCntTholdLoFwd
OBJECT-TYPE
The lower threshold for the ABR connection count Fwd trap. When an allocation causes the ABR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.20INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtABRConnCntTholdLoRev
OBJECT-TYPE
The lower threshold for the ABR connection count Rev trap. When an allocation causes the ABR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.21INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtABRAllocBwTholdHiFwd
OBJECT-TYPE
The upper threshold for the ABR Allocated Bw Fwd trap. When an allocation causes the ABR Allocated Bw to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.22INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtABRAllocBwTholdHiRev
OBJECT-TYPE
The upper threshold for the ABR Allocated Bw Rev trap. When an allocation causes the ABR Allocated Bw to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.23INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtABRAllocBwTholdLoFwd
OBJECT-TYPE
The lower threshold for the ABR Allocated Bw Fwd trap. When an allocation causes the ABR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.24INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtABRAllocBwTholdLoRev
OBJECT-TYPE
The lower threshold for the ABR Allocated Bw Rev trap. When an allocation causes the ABR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.25INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtVBRConnCntTholdHiFwd
OBJECT-TYPE
The upper threshold for the VBR connection count Fwd trap. When an allocation causes the VBR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.26INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtVBRConnCntTholdHiRev
OBJECT-TYPE
The upper threshold for the VBR connection count Rev trap. When an allocation causes the VBR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.27INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtVBRConnCntTholdLoFwd
OBJECT-TYPE
The lower threshold for the VBR connection count Fwd trap. When an allocation causes the VBR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.28INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtVBRConnCntTholdLoRev
OBJECT-TYPE
The lower threshold for the VBR connection count Rev trap. When an allocation causes the VBR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.29INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtVBRAllocBwTholdHiFwd
OBJECT-TYPE
The upper threshold for the VBR Allocated Bw Fwd trap. When an allocation causes the VBR Allocated Bw to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.30INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtVBRAllocBwTholdHiRev
OBJECT-TYPE
The upper threshold for the VBR Allocated Bw Rev trap. When an allocation causes the VBR Allocated Bw to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.31INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtVBRAllocBwTholdLoFwd
OBJECT-TYPE
The lower threshold for the VBR Allocated Bw Fwd trap. When an allocation causes the VBR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.32INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtVBRAllocBwTholdLoRev
OBJECT-TYPE
The lower threshold for the VBR Allocated Bw Rev trap. When an allocation causes the VBR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.33INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtUBRConnCntTholdHiFwd
OBJECT-TYPE
The upper threshold for the UBR connection count Fwd trap. When an allocation causes the UBR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.34INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtUBRConnCntTholdHiRev
OBJECT-TYPE
The upper threshold for the UBR connection count Rev trap. When an allocation causes the UBR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.35INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtUBRConnCntTholdLoFwd
OBJECT-TYPE
The lower threshold for the UBR connection count Fwd trap. When an allocation causes the UBR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.36INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtUBRConnCntTholdLoRev
OBJECT-TYPE
The lower threshold for the UBR connection count Rev trap. When an allocation causes the UBR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.37INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtUBRAllocBwTholdHiFwd
OBJECT-TYPE
The upper threshold for the UBR Allocated Bw Fwd trap. When an allocation causes the UBR Allocated Bw to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.38INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtUBRAllocBwTholdHiRev
OBJECT-TYPE
The upper threshold for the UBR Allocated Bw Rev trap. When an allocation causes the UBR Allocated Bw to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.39INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtUBRAllocBwTholdLoFwd
OBJECT-TYPE
The lower threshold for the UBR Allocated Bw Fwd trap. When an allocation causes the UBR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.40INTEGERread-writemandatory
sfcsBwPortPoolTrapMgmtUBRAllocBwTholdLoRev
OBJECT-TYPE
The lower threshold for the UBR Allocated Bw Rev trap. When an allocation causes the UBR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.41INTEGERread-writemandatory
sfcsBWPortPoolTrapMgmtBuffUpThold
OBJECT-TYPE
The upper threshold for buffer allocation trap .
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.42INTEGERread-writemandatory
sfcsBWPortPoolTrapMgmtBuffLoThold
OBJECT-TYPE
The lower threshold for buffer allocation trap .
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.43INTEGERread-writemandatory
sfcsBWPortPoolTrapMgmtConnRejThold
OBJECT-TYPE
The lower threshold for conn rejects trap .
1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.44INTEGERread-writemandatory
sfcsBuffPools
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.12.4
sfcsBuffPrioTable
OBJECT-TYPE
This table contains the rows of all the buffer pools.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1not-accessiblemandatory
sfcsBuffPrioEntry
OBJECT-TYPE
Each entry contains the rows of all the buffer pools.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1not-accessiblemandatory
sfcsBuffPrioPortIndex
OBJECT-TYPE
This index specifies which port we are dealing with. This reference is in the same format as MIB II's Interface index.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.1INTEGERread-onlymandatory
sfcsBuffPrioPriority
OBJECT-TYPE
This index specifies which priority we are dealing with.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.2INTEGERread-onlymandatory
sfcsBuffPrioAssignCtl
OBJECT-TYPE
The status of how assignment is controlled. Static,Manual,Adaptive.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.3INTEGERread-onlymandatory
sfcsBuffPrioMinCtl
OBJECT-TYPE
The minimum number of cells which can be assigned to this port/prioity.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.4INTEGERread-writemandatory
sfcsBuffPrioAssigned
OBJECT-TYPE
The number of cells which are currently assigned to this port/priority.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.5INTEGERread-writemandatory
sfcsBuffPrioAllocated
OBJECT-TYPE
The number of assigned cells which are currently allocated to VCs for this port/priority.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.6INTEGERread-onlymandatory
sfcsBuffPrioAvailable
OBJECT-TYPE
The number of assigned cells which are free to be allocated.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.7INTEGERread-onlymandatory
sfcsBuffPrioPeakAlloc
OBJECT-TYPE
The peak number of cells which have been allocated to this port/priority.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.8INTEGERread-onlymandatory
sfcsBuffPrioConnRejs
OBJECT-TYPE
The number of connections rejected because of a lack of buffers.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.9INTEGERread-writemandatory
sfcsBuffPrioUpTholdTrap
OBJECT-TYPE
The upper threshold of allocations to trigger an upper thold trap.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.10INTEGERread-writemandatory
sfcsBuffPrioLoTholdTrap
OBJECT-TYPE
The lower threshold of allocations to trigger a lower thold trap.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.11INTEGERread-writemandatory
sfcsBuffPrioConnRejThold
OBJECT-TYPE
The lower threshold of conn rejects trap because of inadequate buffers.
1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.12INTEGERread-writemandatory
sfcsProxy
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.13
sfcsProxyConfig
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.13.1
sfcsProxyConfigTable
OBJECT-TYPE
This table contains the config info and a port reading function.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1not-accessiblemandatory
sfcsProxyConfigEntry
OBJECT-TYPE
Each entry contains ANIM Proxy config info or a function.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1not-accessiblemandatory
sfcsProxyConfigANIMIndex
OBJECT-TYPE
This index specifies which ANIM Proxy we are dealing with. This reference is in the same format as MIB II's Interface index.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.1INTEGERread-onlymandatory
sfcsProxyConfigNUMPORTS
OBJECT-TYPE
Indicates the number of ports per Proxy which is always 4.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.2INTEGERread-onlymandatory
sfcsProxyConfigTxMemSize
OBJECT-TYPE
Indicates the size of the port's Transmission memory in K. The memory size is always 1K.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.3INTEGERread-onlymandatory
sfcsProxyConfigRxMaxPduSize
OBJECT-TYPE
Indicates the size of the port's Transmission memory in K. The memory size is always 1K.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.4INTEGERread-onlymandatory
sfcsProxyConfigBandWidth
OBJECT-TYPE
Indicates the bandwidth for the port, which is ?????
1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.5INTEGERread-onlymandatory
sfcsProxyConfigTransmitDone
OBJECT-TYPE
Checks if the Transmission has finished.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.6INTEGER {yes(1), no(2)}read-onlymandatory
sfcsProxyConfigReceiveFifoState
OBJECT-TYPE
Checks if the port's receive Fifo is full or not.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.7INTEGER {full(1), not-full(2)}read-onlymandatory
sfcsProxyConfigPortTransmitMode
OBJECT-TYPE
Controls Transmission of cells in port Transmit memory.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.8INTEGER {stop(1), start-stay(2), reread(3)}read-writemandatory
sfcsProxyConfigReceiveFifoReset
OBJECT-TYPE
Controls the receive buffer's memory. Reset clears memory.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.9INTEGERwrite-onlymandatory
sfcsProxyConfigTxFifoReset
OBJECT-TYPE
Controls the port's transmit memory. Reset clears memory.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.10INTEGERwrite-onlymandatory
sfcsProxyConfigReceiveMode
OBJECT-TYPE
Controls whether or not the port receives cells.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.11INTEGER {receiving(1), not-receiving(2)}read-writemandatory
sfcsProxyConfigCaptureMode
OBJECT-TYPE
Controls how much of the cell is received.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.12INTEGER {all(1), header(2)}read-writemandatory
sfcsProxyConfigInitPort
OBJECT-TYPE
Setting this returns the port to the initial setup.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.13INTEGERwrite-onlymandatory
sfcsProxyConfigLoad
OBJECT-TYPE
Transmit load for port.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.14INTEGERread-writemandatory
sfcsProxyConfigGumbo
OBJECT-TYPE
Unreadable octet string used for control information.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.15OCTET STRINGread-onlymandatory
sfcsProxyTrans
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.13.2
sfcsProxyTransTable
OBJECT-TYPE
This table contains the arguments and the function for the Transmit function.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1not-accessiblemandatory
sfcsProxyTransEntry
OBJECT-TYPE
The entries are the arguments for the Transmit function.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1not-accessiblemandatory
sfcsProxyTransANIMIndex
OBJECT-TYPE
This index specifies which ANIM Port we are dealing with. This reference is in the same format as MIB II's Interface Index.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.1INTEGERread-onlymandatory
sfcsProxyTransEncodeNewPdu
OBJECT-TYPE
Setting this encodes a new PDU based on the current PDU parameters into the port's transmit memory.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.2INTEGERwrite-onlymandatory
sfcsProxyTransVPI
OBJECT-TYPE
This is the VPI for the PDU.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.3INTEGERread-writemandatory
sfcsProxyTransVCI
OBJECT-TYPE
This is the VCI for the PDU.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.4INTEGERread-writemandatory
sfcsProxyTransPTI
OBJECT-TYPE
Payload Type Indicator: the value of the 3 bit Payload Type field in the header. The most signifigant bit indicates user or control data, the next bit indicates congestion, and the last bit indicates AAL encoding.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.5INTEGER (0..7)read-writemandatory
sfcsProxyTransCLP
OBJECT-TYPE
The cell loss priority: 1 or 0.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.6INTEGERread-writemandatory
sfcsProxyTransPayloadType
OBJECT-TYPE
The payload type for the cell.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.7INTEGER {user-input(1), sequential(2), uniform(3)}read-writemandatory
sfcsProxyTransPayloadLength
OBJECT-TYPE
The length of the payload in bytes.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.8INTEGERread-writemandatory
sfcsProxyTransPayloadData
OBJECT-TYPE
If the payload type is user input, this is the payload itself.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.9OCTET STRINGread-writemandatory
sfcsProxyTransCount
OBJECT-TYPE
Number of copies of the pdu to encode in port transmit memory.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.10INTEGERread-writemandatory
sfcsProxyTransPayloadAdaptionLayer
OBJECT-TYPE
The format of the payload: either raw cells or AAL5.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.11INTEGER {raw(1), aal5(2)}read-writemandatory
sfcsProxyTransMpxMethod
OBJECT-TYPE
The format of the payload: either raw cells or AAL5.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.12INTEGERread-writemandatory
sfcsProxyTransControl
OBJECT-TYPE
Controls how many times to send what's in the port's transmit memory.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.13INTEGER {send-once(1), repeat(2)}read-writemandatory
sfcsProxyTransGumbo
OBJECT-TYPE
Returns the vpi, vci, pti, clp, payload_type, payload_length, count, PAL, mpx method, and control entires for this table in a string where the entries are separated by semicolons.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.14OCTET STRINGread-onlymandatory
sfcsProxyRead
OBJECT-IDENTITY
1.3.6.1.4.1.52.4.1.2.11.1.1.13.3
sfcsProxyReadTable
OBJECT-TYPE
This table contains information read from the cells in the receive fifo.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1not-accessiblemandatory
sfcsProxyReadEntry
OBJECT-TYPE
The entries are the information about the cells or the PDU.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1not-accessiblemandatory
sfcsProxyReadANIMIndex
OBJECT-TYPE
This index specifies which ANIM Port we are dealing with. This reference is in the same format as the MIB II Interface Index.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.1INTEGERread-onlymandatory
sfcsProxyReadMode
OBJECT-TYPE
How the receive fifo is read.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.2INTEGER {reassemble-PDU(1), cell-by-cell(2), all-data(3)}read-writemandatory
sfcsProxyReadNewPdu
OBJECT-TYPE
Pops a new Pdu from the receive fifo to be examined and read.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.3INTEGER {get-next-pdu(1), reread-from-beginning(2)}write-onlymandatory
sfcsProxyReadGumbo
OBJECT-TYPE
Unreadable control information.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.4OCTET STRINGwrite-onlymandatory
sfcsProxyReadVPI
OBJECT-TYPE
This is the VPI for the PDU.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.5INTEGERread-onlymandatory
sfcsProxyReadVCI
OBJECT-TYPE
This is the VCI for the PDU.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.6INTEGERread-onlymandatory
sfcsProxyReadPTI
OBJECT-TYPE
Payload Type Indicator: the value of the 3 bit Payload Type field in the header. The most signifigant bit indicates user or control data, the next bit indicates congestion, and the last bit indicates AAL encoding.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.7INTEGER (0..7)read-onlymandatory
sfcsProxyReadCLP
OBJECT-TYPE
The cell loss priority: 1 or 0.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.8INTEGERread-onlymandatory
sfcsProxyReadDataLength
OBJECT-TYPE
The length of the PDU in bytes.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.9INTEGERread-onlymandatory
sfcsProxyReadData
OBJECT-TYPE
The actual data of the PDU.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.10OCTET STRINGread-onlymandatory
sfcsProxyReadPal
OBJECT-TYPE
The format of the payload: either raw cells or AAL5.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.11INTEGER {raw(1), aal5(2)}read-onlymandatory
sfcsProxyReadInbyteslosts
OBJECT-TYPE
The number of bytes that were dropped while reading. Usually because they occurred before the Start of Cell was discovered.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.12INTEGERread-onlymandatory
sfcsProxyReadInCells
OBJECT-TYPE
The number of cells read since this port was last reset.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.13INTEGERread-onlymandatory
sfcsProxyReadInError
OBJECT-TYPE
The number of pdu's that had to be dropped due to errors.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.14INTEGERread-onlymandatory
sfcsProxyReadInCellReadError
OBJECT-TYPE
The number of cells that had to be dropped due to errors.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.15INTEGERread-onlymandatory
sfcsProxyReadInHecError
OBJECT-TYPE
The number of cell headers that contained errors.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.16INTEGERread-onlymandatory
sfcsProxyReadInTooBigError
OBJECT-TYPE
The number of pdu's that were too large to be received.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.17INTEGERread-onlymandatory
sfcsProxyReadInCRCError
OBJECT-TYPE
The number of pdu's that failed the CRC check.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.18INTEGERread-onlymandatory
sfcsProxyReadInLengthMismatchError
OBJECT-TYPE
The length stored in the pdu did not match the actual length of the pdu read in.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.19INTEGERread-onlymandatory
sfcsProxyReadInTotalCells
OBJECT-TYPE
Total number of cells read in by the snapshot.
1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.20INTEGERread-onlymandatory