CTRON-IP-ROUTER-MIB
- Registered at
- 1.3.6.1.4.1.52.4.2.2.2.3.1
- Namespace
- enterasys
- Source file
CTRON-IP-ROUTER-MIB- Digest
sha256:3800e2555aad9116533d082e2f459e13daf595016c7eb3efb5982e696db5e989
Imports
| From | Symbols |
|---|---|
| ROUTER-OIDS | nwRtrProtoSuites |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
Imported by
2 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CTRON-IP-ROUTER-MIB CTRON-MIB-NAMES CTRON-OIDS ROUTER-OIDS SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Under this module's arcs
Where the registration tree carries on below this module.
| Arc | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2 | nwIpComponents |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| nwIpRouter OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1 | |||
| nwIpMibs OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.1 | |||
| nwIpMibRevText OBJECT-TYPE Indicates the current revision level of the IP MIB in textual format. | 1.3.6.1.4.1.52.4.2.2.2.3.1.1.1 | DisplayString | read-only | mandatory |
| nwIpComponents OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2 | |||
| nwIpSystem OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.1 | |||
| nwIpSysConfig OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.1.1 | |||
| nwIpSysRouterId OBJECT-TYPE The IP Address used to uniquely identify the host (device) running IP Routing Services. The value of nwIpSysRouterId is equal to the highest IP Address in the IP Address Table. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.1.1.1 | IpAddress | read-write | mandatory |
| nwIpSysAdministration OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.1.2 | |||
| nwIpSysAdminStatus OBJECT-TYPE Sets the administrative state of IP Routing Services system-wide. Enabled(3) causes IP Routing Services to become active on all router ports configured and enabled for IP Routing Services. Disabled(2) causes IP Routing Services to become inactive system-wide. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.1.2.1 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwIpSysOperStatus OBJECT-TYPE Indicates the operating condition of IP Routing Services, system-wide. The value of nwIpSysOperStatus indicates any problem with your IP Routing Services configuration. A value of 6 indicates that regardless of the value of nwIpSysAdminStatus,IP Routing Services is not operating because of an invalid configuration. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.1.2.2 | INTEGER {other(1), disabled(2), enabled(3), pending-disable(4), pending-enable(5), invalid-config(6)} | read-only | mandatory |
| nwIpSysAdminReset OBJECT-TYPE Resets IP Routing Services, system-wide. Reset (2) forces a restart of IP Routing Services without a graceful shutdown on any active router ports, without affecting any other routing services. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.1.2.3 | INTEGER {other(1), reset(2)} | read-write | mandatory |
| nwIpSysOperationalTime OBJECT-TYPE Indicates the elapsed time, in hundredths of a second, that nwIpSysOperStatus has been in its current administrative state. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.1.2.4 | TimeTicks | read-only | mandatory |
| nwIpSysVersion OBJECT-TYPE Indicates the current revision level of the IP Routing Services firmware, in textual format. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.1.2.5 | DisplayString | read-only | mandatory |
| nwIpForwarding OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2 | |||
| nwIpFwdSystem OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1 | |||
| nwIpFwdCounters OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1 | |||
| nwIpFwdCtrAdminStatus OBJECT-TYPE Sets the administrative state of the aggregate (system-wide) IP packet and byte counters. Enabled (3) causes these counters to become active. Disabled (2) causes these counters to become inactive. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.1 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwIpFwdCtrReset OBJECT-TYPE Resets the aggregate (system-wide) IP packet and byte counters. Reset (2) resets the IP aggregate counters to 0. nwIpFwdCtrOperationalTime is also reset to 0. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.2 | INTEGER {other(1), reset(2)} | read-write | mandatory |
| nwIpFwdCtrOperationalTime OBJECT-TYPE Indicates the elapsed time, in hundredths of a second, that nwIpFwdCtrAdminStatus has been in the current state. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.3 | TimeTicks | read-only | mandatory |
| nwIpFwdCtrInPkts OBJECT-TYPE Indicates the total number of IP packets that have been received, system-wide, during nwIpFwdCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.4 | Counter | read-only | mandatory |
| nwIpFwdCtrOutPkts OBJECT-TYPE Indicates the total number of IP packets that have been transmitted, system-wide, during nwIpFwdCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.5 | Counter | read-only | mandatory |
| nwIpFwdCtrFwdPkts OBJECT-TYPE Indicates the total number of IP packets that have been forwarded, system-wide, during nwIpFwdCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.6 | Counter | read-only | mandatory |
| nwIpFwdCtrFilteredPkts OBJECT-TYPE Indicates the total number of IP packets that have been administratively filtered, system-wide, during nwIpFwdCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.7 | Counter | read-only | mandatory |
| nwIpFwdCtrDiscardPkts OBJECT-TYPE Indicates the total number of IP packets that have been discarded, system-wide, during nwIpFwdCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.8 | Counter | read-only | mandatory |
| nwIpFwdCtrAddrErrPkts OBJECT-TYPE Indicates the total number of IP packets that have been discarded, system-wide, during nwIpFwdCtrOperationalTime, because of addressing errors in the IP header. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.9 | Counter | read-only | mandatory |
| nwIpFwdCtrLenErrPkts OBJECT-TYPE Indicates the total number of IP packets that have been discarded, system-wide, during nwIpFwdCtrOperationalTime, because an invalid packet length is contained in the IP header. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.10 | Counter | read-only | mandatory |
| nwIpFwdCtrHdrErrPkts OBJECT-TYPE Indicates the total number of IP packets that have been discarded, system-wide, during nwIpFwdCtrOperationalTime, because of an invalid IP header. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.11 | Counter | read-only | mandatory |
| nwIpFwdCtrInBytes OBJECT-TYPE Indicates the total number of bytes in the IP packets that have been received, system-wide, during nwIpFwdCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.12 | Counter | read-only | mandatory |
| nwIpFwdCtrOutBytes OBJECT-TYPE Indicates the total number of bytes in the IP packets that have been transmitted, system-wide, during nwIpFwdOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.13 | Counter | read-only | mandatory |
| nwIpFwdCtrFwdBytes OBJECT-TYPE Indicates the total number of bytes in the IP packets that have been forwarded, system-wide, during nwIpFwdCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.14 | Counter | read-only | mandatory |
| nwIpFwdCtrFilteredBytes OBJECT-TYPE Indicates the total number of bytes in the IP packets that have been administratively filtered, system-wide, during nwIpFwdCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.15 | Counter | read-only | mandatory |
| nwIpFwdCtrDiscardBytes OBJECT-TYPE Indicates the total number of bytes in the IP packets that have been discarded, system-wide, during nwIpFwdCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.16 | Counter | read-only | mandatory |
| nwIpFwdCtrHostInPkts OBJECT-TYPE Indicates the total number of IP packets that have been successfully delivered to the local host, during nwIpFwdCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.17 | Counter | read-only | mandatory |
| nwIpFwdCtrHostOutPkts OBJECT-TYPE Indicates the total number of IP packets that have been forwarded by the local host, during nwIpFwdCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.18 | Counter | read-only | mandatory |
| nwIpFwdCtrHostDiscardPkts OBJECT-TYPE Indicates the total number of IP packets that have been discarded by the local host, during nwIpFwdCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.19 | Counter | read-only | mandatory |
| nwIpFwdCtrHostInBytes OBJECT-TYPE Indicates the total number of IP packets that have been received by the local host, during nwIpFwdCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.20 | Counter | read-only | mandatory |
| nwIpFwdCtrHostOutBytes OBJECT-TYPE Indicates the total number of IP packets that have been transmitted by the local host, during nwIpFwdCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.21 | Counter | read-only | mandatory |
| nwIpFwdCtrHostDiscardBytes OBJECT-TYPE Indicates the total number of bytes in the IP packets that have been discarded by the local host, during nwIpFwdCtrOperationalTime, due to a lack of host resources. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.1.1.22 | Counter | read-only | mandatory |
| nwIpFwdInterfaces OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2 | |||
| nwIpFwdIfConfig OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1 | |||
| nwIpFwdIfTable OBJECT-TYPE This table contains an entry for each router port. This table is indexed by nwIpFwdIfIndex, which indicates the value of MIB 2 ifindex which identifies the router port for which each entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1 | not-accessible | mandatory | |
| nwIpFwdIfEntry OBJECT-TYPE Each entry specifies the IP Routing Services configuration for the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1 | not-accessible | mandatory | |
| nwIpFwdIfIndex OBJECT-TYPE Indicates the value of MIB 2 ifindex, which identifies the router port. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.1 | INTEGER | read-only | mandatory |
| nwIpFwdIfAdminStatus OBJECT-TYPE Sets the administrative state of IP Routing Services on the router port for which the entry exists. Enabled (3) causes IP Routing Services to become active. Disabled (2) causes it to become inactive. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.2 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwIpFwdIfOperStatus OBJECT-TYPE Indicates the current operating condition of IP Routing Services on the router port for which the entry exists. The value of nwIpFwdIfOperStatus indicates any problem with the configuration of IP routing Services on the router port. A value of 6 indicates that regardless of the value of nwIpFwdIfAdminStatus, IP Routing Services is not operating because of an invalid port-level configuration. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.3 | INTEGER {other(1), disabled(2), enabled(3), pending-disable(4), pending-enable(5), invalid-config(6)} | read-only | mandatory |
| nwIpFwdIfOperationalTime OBJECT-TYPE Indicates the elapsed time, in hundredths of a second, that nwIpFwdIfOperStatus has been in its current state. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.4 | TimeTicks | read-only | mandatory |
| nwIpFwdIfControl OBJECT-TYPE This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting this object has no effect. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.5 | INTEGER {other(1), add(2), delete(3)} | read-write | mandatory |
| nwIpFwdIfMtu OBJECT-TYPE Specifies the Maximum Transmission Unit (MTU) for IP packets on the router port for which the entry exists. This includes the IP header and data, but does not include framing. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.6 | INTEGER | read-write | mandatory |
| nwIpFwdIfForwarding OBJECT-TYPE Controls forwarding of IP packets on the router port for which the entry exists. Enabled (3) causes IP packets to be forwarded. Disabled (2) prevents IP packets from being forwarded. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.7 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwIpFwdIfFrameType OBJECT-TYPE Specifies the framing type for IP packets forwarded on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.8 | INTEGER {other(1), ethernet(2), snap(3), slip(5), localtalk(7), nativewan(8), encapenet(9), encapenetsnap(11), encaptrsnap(14), encapfddisnap(16), canonical(17)} | read-write | mandatory |
| nwIpFwdIfAclIdentifier OBJECT-TYPE Specifies the Access Control ID of the access control list in effect for the IP packets being routed on the router port for which the entry exists. A value of 0 indicates that no access control list is in effect. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.9 | INTEGER | read-write | mandatory |
| nwIpFwdIfAclStatus OBJECT-TYPE Controls the operation of any access control list configured for IP traffic for the IP packets being routed on the router port for which the entry exists. Enabled (3) applies the access control list, indicated by nwIpFwdIfAclIdentifier to all IP traffic being routed on the port. Disabled (2) prevents the access control list from being applied. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.10 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwIpFwdIfCacheControl OBJECT-TYPE Controls IP Address caching on the router port for which the entry exists. IP Address caching speeds-up the switching process. When IP Addresses caching is enabled, IP Addresses used for address validation, filtering, and forwarding are stored in the cache. This cache is checked first before doing a full route table lookup, which speeds up the switching process. Enabled (3) turns on IP Address caching. Disabled (2 turns it off. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.11 | INTEGER {other(1), disable(2), enable(3)} | read-write | mandatory |
| nwIpFwdIfCacheEntries OBJECT-TYPE Indicates the number of entries in the IP Address cache on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.12 | Counter | read-only | mandatory |
| nwIpFwdIfCacheHits OBJECT-TYPE Indicates the number of times entries in the IP Address Cache have been used to provide the IP Address required to validate, filter, or forward an IP packet on the router port. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.13 | Counter | read-only | mandatory |
| nwIpFwdIfCacheMisses OBJECT-TYPE Indicates the number of times the IP Address required to validate, filter, or forward an IP packet on the router port was not found in the IP Address cache. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.14 | Counter | read-only | mandatory |
| nwIpAddressTable OBJECT-TYPE This table contains an entry for each IP Address assigned to each router port. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.2 | not-accessible | mandatory | |
| nwIpAddrEntry OBJECT-TYPE Each entry specifies the IP addressing information for the logical IP network for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.2.1 | not-accessible | mandatory | |
| nwIpAddrIfIndex OBJECT-TYPE Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.2.1.1 | INTEGER | read-write | mandatory |
| nwIpAddrIfAddress OBJECT-TYPE This is the IP Address assigned to the logical IP network for which the entry exist. As multiple IP Addresses may be assigned to a single router port, all addresses assigned to the port must be of the same subnet. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.2.1.2 | IpAddress | read-write | mandatory |
| nwIpAddrIfControl OBJECT-TYPE Set this object to add or delete this entry from the table. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.2.1.3 | INTEGER {other(1), add(2), delete(3)} | read-write | mandatory |
| nwIpAddrIfAddrType OBJECT-TYPE Specifies whether the IP address, nwIpAddrIfAddress, is the primary, workgroup or secondary IP address for the IP router port for which the entry exists. A primary or workgroup address must be specified before a router port can be enabled. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.2.1.4 | INTEGER {other(1), primary(2), secondary(3), workgroup(4)} | read-write | mandatory |
| nwIpAddrIfMask OBJECT-TYPE Specifies the Subnet Mask for the logical IP network for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.2.1.5 | IpAddress | read-write | mandatory |
| nwIpAddrIfBcastAddr OBJECT-TYPE Specifies the IP broadcast address type for the logical IP network for which the entry exists. A router port may be configured to send IP broadcasts using the all-ones-based format or the all-zeros-based format. nwIpAddrIfBcastAddr determines the value of the broadcast portion of the IP broadcast address being used to address broadcast packets. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.2.1.6 | INTEGER {other(1), zeros(2), ones(3)} | read-write | mandatory |
| nwIpFwdIfCounters OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2 | |||
| nwIpFwdIfCtrTable OBJECT-TYPE This table contains an entry for each router port configured and enabled for IP Routing Services. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1 | not-accessible | mandatory | |
| nwIpFwdIfCtrEntry OBJECT-TYPE Each entry indicates the packet and byte count of IP packets on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1 | not-accessible | mandatory | |
| nwIpFwdIfCtrIfIndex OBJECT-TYPE Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.1 | INTEGER | read-only | mandatory |
| nwIpFwdIfCtrAdminStatus OBJECT-TYPE Sets the administrative state of the per-port IP packet and byte counters on the router port for which the entry exists. Enabled (3) causes these counters to become active. Disabled (2) causes these counters to become inactive. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.2 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwIpFwdIfCtrReset OBJECT-TYPE Resets the per-port IP packet and byte counters on the router port for which the entry exists. Reset (2) resets the counters to 0. nwIpFwdIfCtrOperationalTime is also reset to 0. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.3 | INTEGER {other(1), reset(2)} | read-write | mandatory |
| nwIpFwdIfCtrOperationalTime OBJECT-TYPE Indicates the elapsed time, in hundredths of a second, that the per-port IP packet and byte counters have been active on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.4 | TimeTicks | read-only | mandatory |
| nwIpFwdIfCtrInPkts OBJECT-TYPE Indicates the total number of IP packets that have been received, during nwIpFwdIfCtrOperationaltime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.5 | Counter | read-only | mandatory |
| nwIpFwdIfCtrOutPkts OBJECT-TYPE Indicates the total number of IP packets that have been transmitted, during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.6 | Counter | read-only | mandatory |
| nwIpFwdIfCtrFwdPkts OBJECT-TYPE Indicates the total number of IP packets that have been forwarded during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.7 | Counter | read-only | mandatory |
| nwIpFwdIfCtrFilteredPkts OBJECT-TYPE Indicates the total number of IP packets that have been administratively filtered, during nwIpFwdIfCtrOperationalTime, on the IP router port for which this entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.8 | Counter | read-only | mandatory |
| nwIpFwdIfCtrDiscardPkts OBJECT-TYPE Indicates the total number of IP packets that have been discarded (dropped), during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.9 | Counter | read-only | mandatory |
| nwIpFwdIfCtrAddrErrPkts OBJECT-TYPE Indicates the total number of IP packets that have been discarded, because of addressing errors in the IP header, during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.10 | Counter | read-only | mandatory |
| nwIpFwdIfCtrLenErrPkts OBJECT-TYPE Indicates the total number of IP packets that have been discarded, because an invalid packet length was contained in the IP header, during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.11 | Counter | read-only | mandatory |
| nwIpFwdIfCtrHdrErrPkts OBJECT-TYPE Indicates the total number of IP packets that have been discarded, because of an invalid IP header, during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.12 | Counter | read-only | mandatory |
| nwIpFwdIfCtrInBytes OBJECT-TYPE Indicates the total number of bytes in the IP packets that have been received, during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.13 | Counter | read-only | mandatory |
| nwIpFwdIfCtrOutBytes OBJECT-TYPE Indicates the total number of bytes in the IP packets that have been transmitted, during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.14 | Counter | read-only | mandatory |
| nwIpFwdIfCtrFwdBytes OBJECT-TYPE Indicates the total number of bytes in the IP packets that have been forwarded, on the router port for which the entry exists, during nwIpFwdIfCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.15 | Counter | read-only | mandatory |
| nwIpFwdIfCtrFilteredBytes OBJECT-TYPE Indicates the total number of bytes in the IP packets that have been administratively filtered, during nwIpFwdIfCtrOperationalTime, on the IP router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.16 | Counter | read-only | mandatory |
| nwIpFwdIfCtrDiscardBytes OBJECT-TYPE Indicates the total number of bytes in the IP packets that have been discarded, during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.17 | Counter | read-only | mandatory |
| nwIpFwdIfCtrHostInPkts OBJECT-TYPE Indicates the total number of IP packets that have been successfully delivered to the local host, that were received on the router port for which the entry exists, during nwIpFwdIfCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.18 | Counter | read-only | mandatory |
| nwIpFwdIfCtrHostOutPkts OBJECT-TYPE Indicates the total number of IP packets that have been transmitted by the local host, during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.19 | Counter | read-only | mandatory |
| nwIpFwdIfCtrHostDiscardPkts OBJECT-TYPE Indicates the total number of IP packets discarded by the local host due to a lack of host resources, that were received on the router port for which the entry exists, during nwIpFwdIfCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.20 | Counter | read-only | mandatory |
| nwIpFwdIfCtrHostInBytes OBJECT-TYPE Indicates the total number of bytes in the IP packets that have been successfully delivered to the local host, that were received on the router port for which the entry exists, during nwIpFwdIfCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.21 | Counter | read-only | mandatory |
| nwIpFwdIfCtrHostOutBytes OBJECT-TYPE Indicates the total number of bytes in the IP packets that have been transmitted by the local host, during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.22 | Counter | read-only | mandatory |
| nwIpFwdIfCtrHostDiscardBytes OBJECT-TYPE Indicates the total number of bytes in the IP packets that have been discarded by the local host due to a lack of host resources, that were received on the router port for which the entry exists, during nwIpFwdIfCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.23 | Counter | read-only | mandatory |
| nwIpTopology OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4 | |||
| nwIpDistanceVector OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1 | |||
| nwIpRip OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1 | |||
| nwIpRipSystem OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1 | |||
| nwIpRipConfig OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.1 | |||
| nwIpRipAdminStatus OBJECT-TYPE Sets the administrative state of the RIP routing protocol system-wide. Enabled (3) causes RIP to become active on all router ports configured and enabled for IP Routing Services. Disabled (2) causes RIP to become inactive. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.1.1 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwIpRipOperStatus OBJECT-TYPE Indicates the current operating condition of the RIP routing protocol system-wide. The value of nwIpRipOperStatus indicates any problem with your RIP configuration. A value of 6 indicates that regardless of the value of nwIpRipAdminStatus, RIP is not operating because of an invalid configuration. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.1.2 | INTEGER {other(1), disabled(2), enabled(3), pending-disable(4), pending-enable(5), invalid-config(6)} | read-only | mandatory |
| nwIpRipAdminReset OBJECT-TYPE Resets the RIP routing protocol. Reset (2) forces a system-wide restart of the protocol system-wide without a graceful shutdown on any active router ports. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.1.3 | INTEGER {other(1), reset(2)} | read-write | mandatory |
| nwIpRipOperationalTime OBJECT-TYPE Indicates the elapsed time, in hundredths of a second, that nwIpRipOperStatus, has been in its current state. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.1.4 | TimeTicks | read-only | mandatory |
| nwIpRipVersion OBJECT-TYPE Indicates the current revision level of the RIP routing protocol firmware, in textual format. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.1.5 | DisplayString | read-only | mandatory |
| nwIpRipStackSize OBJECT-TYPE Specifies the stack size of the RIP routing protocol thread. In order for a change of this value to take effect, the protocol (nwIpRipAdminReset), IP Routing Services (nwIpSysAdminReset), or the device running Routing Services must be reset. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.1.6 | INTEGER | read-write | mandatory |
| nwIpRipThreadPriority OBJECT-TYPE Specifies the run-time execution priority of the RIP routing protocol thread. In order for a change of this value to take effect, RIP (nwIpRipAdminReset), IP Routing Services (nwIpAdminReset), or the device running Routing Services must be reset. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.1.7 | INTEGER | read-write | mandatory |
| nwIpRipDatabaseThreshold OBJECT-TYPE Specifies the run-time maximum number of RIP entries that can be held in the RIP route table. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.1.8 | INTEGER | read-write | mandatory |
| nwIpRipAgeOut OBJECT-TYPE Specifies the amount of time, in seconds, that an inactive route table entry will be allowed to remain in the RIP route table before it is aged-out. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.1.9 | INTEGER | read-write | mandatory |
| nwIpRipHoldDown OBJECT-TYPE Specifies the amount of time (in seconds) to wait before removing an entry from the route table, after receiving an update indicating that the destination has become unreachable. All routers exchanging RIP routing protocol information must have the same hold down time. The time must be long enough to allow all participating routers to receive the same update. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.1.10 | INTEGER | read-write | mandatory |
| nwIpRipCounters OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.2 | |||
| nwIpRipCtrAdminStatus OBJECT-TYPE Sets the administrative state of the aggregate (system-wide) RIP routing protocol packet and byte counters. Enabled (3) causes these counters to become active. Disabled (2) causes these counters to become inactive. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.2.1 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwIpRipCtrReset OBJECT-TYPE Resets the aggregate (system-wide) RIP routing protocol packet and byte counters. Reset (2) resets the RIP aggregate counters to 0. nwIpRipCtrOperationalTime is also reset to 0. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.2.2 | INTEGER {other(1), reset(2)} | read-write | mandatory |
| nwIpRipCtrOperationalTime OBJECT-TYPE Indicates the elapsed time, in hundredths of a second, that nwIpRipCtrAdminStatus has been in the current state. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.2.3 | TimeTicks | read-only | mandatory |
| nwIpRipCtrInPkts OBJECT-TYPE Indicates the total number of RIP packets that have been received, system-wide, during nwIpRipCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.2.4 | Counter | read-only | mandatory |
| nwIpRipCtrOutPkts OBJECT-TYPE Indicates the total number of RIP packets that have been transmitted, system-wide, during nwIpRipCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.2.5 | Counter | read-only | mandatory |
| nwIpRipCtrFilteredPkts OBJECT-TYPE Indicates the total number of RIP packets that have been administratively filtered, system-wide, during nwIpRipCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.2.6 | Counter | read-only | mandatory |
| nwIpRipCtrDiscardPkts OBJECT-TYPE Indicates the total number of RIP packets that have been discarded, system-wide, during nwIpRipCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.2.7 | Counter | read-only | mandatory |
| nwIpRipCtrInBytes OBJECT-TYPE Indicates the total number of bytes in the RIP packets that have been received, system-wide, during nwIpRipCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.2.8 | Counter | read-only | mandatory |
| nwIpRipCtrOutBytes OBJECT-TYPE Indicates the total number of bytes in the RIP packets that have been transmitted, system-wide, during nwIpRipCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.2.9 | Counter | read-only | mandatory |
| nwIpRipCtrFilteredBytes OBJECT-TYPE Indicates the total number of bytes in the RIP packets that have been administratively filtered, system-wide, during nwIpRipCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.2.10 | Counter | read-only | mandatory |
| nwIpRipCtrDiscardBytes OBJECT-TYPE Indicates the total number of bytes in the RIP packets that have been discarded, system-wide, during nwIpRipCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.1.2.11 | Counter | read-only | mandatory |
| nwIpRipInterfaces OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2 | |||
| nwIpRipIfConfig OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1 | |||
| nwIpRipIfTable OBJECT-TYPE This table contains an entry for each router port. Each entry can contain different values, allowing the routing protocol configuration to vary from router port to router port. This table is indexed by nwIpRipIfIndex, which indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1 | not-accessible | mandatory | |
| nwIpRipIfEntry OBJECT-TYPE Each entry contains the RIP routing protocol configuration for the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1 | not-accessible | mandatory | |
| nwIpRipIfIndex OBJECT-TYPE Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.1 | INTEGER | read-only | mandatory |
| nwIpRipIfAdminStatus OBJECT-TYPE Sets the administrative state of the RIP routing protocol on the router port for which the entry exists. Enabled (3) causes RIP to become active on the router port. Disabled (2) causes RIP to become inactive on the router port. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.2 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwIpRipIfOperStatus OBJECT-TYPE Indicates the current operating condition of the RIP routing protocol on the router port for which the entry exists. The value of nwIpRipIfOperStatus indicates any problem with your RIP configuration on the router port. A value of 6 indicates that regardless of the value of nwIpRipIfAdminStatus, RIP is not operating on the port because of an invalid configuration. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.3 | INTEGER {other(1), disabled(2), enabled(3), pending-disable(4), pending-enable(5)} | read-only | mandatory |
| nwIpRipIfOperationalTime OBJECT-TYPE Indicates the elapsed time, in hundredths of a second, nwIpRipIfOperStatus, has been in its current state. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.4 | TimeTicks | read-only | mandatory |
| nwIpRipIfVersion OBJECT-TYPE Indicates the revision level of the RIP routing protocol firmware on the router port for which the entry exists, in textual format. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.5 | INTEGER | read-write | mandatory |
| nwIpRipIfAdvertisement OBJECT-TYPE Sets the interval, in seconds, at which RIP advertises the RIP route table on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.6 | INTEGER | read-write | mandatory |
| nwIpRipIfFloodDelay OBJECT-TYPE Sets the length of time, in seconds, that the RIP routing protocol should wait after discovering that a directly connected route has gone down, before flooding updates (triggered updates) on the router port for which the entry exists. A value of 0 specifies that if a directly connected route goes down, updates should be sent immediately. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.7 | INTEGER | read-write | mandatory |
| nwIpRipIfRequestDelay OBJECT-TYPE Sets the length of time, in hundredths of a second, that the RIP routing protocol should wait after receiving a route request packet, before sending a response on the router port for which the entry exists. A value of 0 specifies that if a route request packet is received on the port, a response should be sent immediately. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.8 | INTEGER | read-write | mandatory |
| nwIpRipIfPriority OBJECT-TYPE This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting this object has no effect. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.9 | INTEGER | read-write | mandatory |
| nwIpRipIfHelloTimer OBJECT-TYPE This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interfaced to all the Cabletron Routing Services protocol-specific MIBs. Setting this object has no effect. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.10 | INTEGER | read-write | mandatory |
| nwIpRipIfSplitHorizon OBJECT-TYPE Sets the operating condition of Split Horizon on the router port for which the entry exists. When Split Horizon is enabled, the RIP routing protocol keeps track of which router port route information is received on, and prevents information about a route form being sent back out the same router port it was received on. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.11 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwIpRipIfPoisonReverse OBJECT-TYPE Sets the operating condition of Poison Reverse on the router port for which the entry exists. When Poison Reverse is enabled, the RIP routing protocol advertises any downed route as unreachable during the period of time that it must wait before removing the route from the route table. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.12 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwIpRipIfSnooping OBJECT-TYPE Controls the operation of RIP Snooping on the router port. When RIP Snooping is enabled the RIP routing protocol operates in passive mode so that it receives route information, builds and maintains a route table, but does not advertise the route table or send updates on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.13 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwIpRipIfType OBJECT-TYPE Indicates whether the directly connected network segment does or does not support broadcast media access. If broadcast media access is supported, RIP advertisements are sent out one broadcast packet per router port. If broadcast media is not supported, RIP advertisements are sent directly to each neighbor router access. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.14 | INTEGER {other(1), bma(2), nbma(3)} | read-only | mandatory |
| nwIpRipIfXmitCost OBJECT-TYPE This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting this object has no effect. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.15 | INTEGER | read-write | mandatory |
| nwIpRipIfAclIdentifier OBJECT-TYPE Specifies the Access Control ID of the access control list in effect for RIP routing protocol packets on the router port for which the entry exists. A value of 0 indicates that there is no access control list in effect for RIP routing protocol packets on the router port. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.16 | INTEGER | read-write | mandatory |
| nwIpRipIfAclStatus OBJECT-TYPE Controls the operation of the access control list identified by nwIpRipIfAclIdentifier. Enabled (3) applies the access control list to all RIP routing protocol packet traffic on the router port for which the entry exists. Disabled (2) prevents the access control list from being applied. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.17 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwIpRipIfCounters OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2 | |||
| nwIpRipIfCtrTable OBJECT-TYPE This table contains an entry for each router port.This table is indexed by nwIpRipIfCtrIfIndex which indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1 | not-accessible | mandatory | |
| nwIpRipIfCtrEntry OBJECT-TYPE Each entry indicates the current packet and byte count of RIP routing protocol packets on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1 | not-accessible | mandatory | |
| nwIpRipIfCtrIfIndex OBJECT-TYPE Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.1 | INTEGER | read-only | mandatory |
| nwIpRipIfCtrAdminStatus OBJECT-TYPE Sets the administrative state of the RIP packet and byte counters on the router port for which this entry exists. Enabled (3) causes these counters to become active. Disabled (2) causes these counters to become inactive. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.2 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwIpRipIfCtrReset OBJECT-TYPE Resets the per-port RIP packet and byte counters on the router port for which this entry exists. Reset (2) resets the counters to 0. nwIpRipIfCtrOperationalTime is also reset to 0. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.3 | INTEGER {other(1), reset(2)} | read-write | mandatory |
| nwIpRipIfCtrOperationalTime OBJECT-TYPE Indicates the elapsed time, in hundredths of a second, that nwIpRipIfCtrAdminStatus has been in the current state. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.4 | TimeTicks | read-only | mandatory |
| nwIpRipIfCtrInPkts OBJECT-TYPE Indicates the total number of RIP routing protocol packets that have been received, during nwIpRipIfCtrOperationalTime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.5 | Counter | read-only | mandatory |
| nwIpRipIfCtrOutPkts OBJECT-TYPE Indicates the total number of RIP packets that have been transmitted, during nwIpRipIfCtrOperationalTime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.6 | Counter | read-only | mandatory |
| nwIpRipIfCtrFilteredPkts OBJECT-TYPE Indicates the total number of RIP packets that have been administratively filtered during nwIpRipIfCtrOperationalTime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.7 | Counter | read-only | mandatory |
| nwIpRipIfCtrDiscardPkts OBJECT-TYPE Indicates the total number of RIP routing protocol packets that have been discarded, during nwIpRipIfCtrOperationalTime. that were received through the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.8 | Counter | read-only | mandatory |
| nwIpRipIfCtrInBytes OBJECT-TYPE Indicates the total number of bytes in the RIP routing protocol packets that have been received, during nwIpRipIfCtrOperationalTime, on the router port for which this entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.9 | Counter | read-only | mandatory |
| nwIpRipIfCtrOutBytes OBJECT-TYPE Indicates the total number of bytes in the RIP routing protocol packets that have been transmitted, during nwIpRipIfCtrOperationalTime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.10 | Counter | read-only | mandatory |
| nwIpRipIfCtrFilteredBytes OBJECT-TYPE Indicates the total number of bytes in the RIP routing protocol packets that have been administratively filtered, during nwIpRipIfCtrOperationalTime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.11 | Counter | read-only | mandatory |
| nwIpRipIfCtrDiscardBytes OBJECT-TYPE Indicates the total number of bytes in the RIP routing protocol packets that have been discarded during nwIpRipIfCtrOperationalTime, that were received on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.12 | Counter | read-only | mandatory |
| nwIpRipDatabase OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3 | |||
| nwIpRipRouteTable OBJECT-TYPE This table contains the RIP route table. This table contains an entry for each route learned through the RIP routing protocol. Only the best routes from this table are added to the IP forwarding table to be used for packet switching. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1 | not-accessible | mandatory | |
| nwIpRipRouteEntry OBJECT-TYPE Each entry describes the RIP route to the destination network for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1 | not-accessible | mandatory | |
| nwIpRipRtNetId OBJECT-TYPE This is the primary index into the RIP route table. This number indicates the IP Address of the destination for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.1 | IpAddress | read-only | mandatory |
| nwIpRipRtIfIndex OBJECT-TYPE This is a secondary index into IP-RIP route table. This number corresponds to the value of MIB 2 ifindex, which identifies the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.2 | INTEGER | read-only | mandatory |
| nwIpRipRtSrcNode OBJECT-TYPE This is a secondary index into the RIP route table. This number indicates the IP Address of the source router from which this route was learned. A value of 0.0.0.0 indicates that the source is on the network segment directly connected to the router port, nwIpRipRtIfIndex. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.3 | IpAddress | read-only | mandatory |
| nwIpRipRtMask OBJECT-TYPE Indicates the Subnet Mask of the IP Address for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.4 | IpAddress | read-only | mandatory |
| nwIpRipRtHops OBJECT-TYPE Indicates the number of hops required to reach the destination for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.5 | INTEGER | read-only | mandatory |
| nwIpRipRtAge OBJECT-TYPE Indicates the amount of time, in seconds, since an update has been received for the route for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.6 | TimeTicks | read-only | mandatory |
| nwIpRipRtType OBJECT-TYPE Indicates whether the destination network is directly connected through the router port specified by nwIpRipRtIfIndex, or is indirectly connected through another router, specified by nwIpRipRtSrcNode. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.7 | INTEGER {other(1), invalid(2), direct(3), remote(4), static(5), ospf(6)} | read-only | mandatory |
| nwIpRipRtFlags OBJECT-TYPE Specifies properties of the RIP route. The bit mask is as follows: source-changed (1), best-source (2), local net (4), net-down (8), update-fib-only (16). | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.8 | INTEGER | read-only | mandatory |
| nwIpRipFilters OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.4 | |||
| nwIpLinkState OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2 | |||
| nwIpOspf OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1 | |||
| nwIpOspfSystem OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1 | |||
| nwIpOspfConfig OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.1 | |||
| nwIpOspfAdminStatus OBJECT-TYPE Sets the administrative state of the OSPF routing protocol. enabled(3) causes OSPF to become active on any IP configured router ports. disabled(2) causes OSPF to perform a graceful shutdown on any active IP configured router ports. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.1.1 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwIpOspfOperStatus OBJECT-TYPE Indicates the current operating condition of OSPF. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.1.2 | INTEGER {other(1), disabled(2), enabled(3), pending-disable(4), pending-enable(5)} | read-only | mandatory |
| nwIpOspfAdminReset OBJECT-TYPE Resets OSPF. reset(2) will force a restart of OSPF on any active IP router ports, configured for OSPF, without a graceful shutdown, without affecting any other routing services. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.1.3 | INTEGER {other(1), reset(2)} | read-write | mandatory |
| nwIpOspfOperationalTime OBJECT-TYPE Indicates the amount of time (#of time ticks) that OSPF has been in its current operational state. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.1.4 | TimeTicks | read-only | mandatory |
| nwIpOspfVersion OBJECT-TYPE Indicates the current Cabletron revision level of OSPF in textual format, not the OSPF version supported. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.1.5 | DisplayString | read-only | mandatory |
| nwIpOspfStackSize OBJECT-TYPE Specifies the stack size for the OSPF thread. In order for a change of this value to take effect, OSPF (nwIpOspfAdminStatus), IP (nwIpSysAdminStatus), or the device itself must be reset. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.1.6 | INTEGER | read-write | mandatory |
| nwIpOspfThreadPriority OBJECT-TYPE Specifies the run-time execution priority of the OSPF protocol thread. In order for a change of this value to take effect, OSPF or the IP routing services, or the device must be reset. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.1.7 | INTEGER | read-write | mandatory |
| nwIpOspfCounters OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.2 | |||
| nwIpOspfCtrAdminStatus OBJECT-TYPE Sets the operating condition of the aggregate (device-wide) OSPF packet and byte counters. enable (3) causes these counters to become active on any router ports running OSPF. disabled (2) cause these counters to become inactive on any router port running OSPF. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.2.1 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwIpOspfCtrReset OBJECT-TYPE Resets the aggregate (device-wide) OSPF packet and byte counters. reset(2) resets the aggregate OSPF counters to 0 and nwIpOspfCtrOperationalTime to 0. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.2.2 | INTEGER {other(1), reset(2)} | read-write | mandatory |
| nwIpOspfCtrOperationalTime OBJECT-TYPE Indicates the amount of time (# of time ticks) that the aggregate OSPF packet and byte counters have been active. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.2.3 | TimeTicks | read-only | mandatory |
| nwIpOspfCtrInPkts OBJECT-TYPE Indicates the total number of OSPF packets that have been received, device-wide, during nwIpOspfCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.2.4 | Counter | read-only | mandatory |
| nwIpOspfCtrOutPkts OBJECT-TYPE Indicates the total number of OSPF packets that have been transmitted, device-wide, during nwIpOspfCtr- Operational-Time. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.2.5 | Counter | read-only | mandatory |
| nwIpOspfCtrFilteredPkts OBJECT-TYPE Indicates the total number of OSPF packets that have been administratively filtered, device-wide, during nwIpOspfCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.2.6 | Counter | read-only | mandatory |
| nwIpOspfCtrDiscardPkts OBJECT-TYPE Indicates the total number of OSPF packets that have been discarded, device-wide, during nwIpOspfCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.2.7 | Counter | read-only | mandatory |
| nwIpOspfCtrInBytes OBJECT-TYPE Indicates the total number of bytes in the OSFP packets that have been received, device-wide, during nwIpOspfCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.2.8 | Counter | read-only | mandatory |
| nwIpOspfCtrOutBytes OBJECT-TYPE Indicates the total number of bytes in the OSPF packets that have been transmitted, device-wide, during nwIpOspfCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.2.9 | Counter | read-only | mandatory |
| nwIpOspfCtrFilteredBytes OBJECT-TYPE Indicates the total number of bytes in the OSPF packets that have been administratively filtered, device-wide, during nwIpOspfCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.2.10 | Counter | read-only | mandatory |
| nwIpOspfCtrDiscardBytes OBJECT-TYPE Indicates the total number of bytes in the OSPF packets that have been discarded, during nwIpOspfCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.1.2.11 | Counter | read-only | mandatory |
| nwIpOspfInterfaces OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2 | |||
| nwIpOspfIfConfig OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1 | |||
| nwIpOspfIfTable OBJECT-TYPE This table contains the OSPF configuration information for each IP router port | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1 | not-accessible | mandatory | |
| nwIpOspfIfEntry OBJECT-TYPE Each entry specifies the OSPF configuration information for the IP router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1 | not-accessible | mandatory | |
| nwIpOspfIfIndex OBJECT-TYPE This is the primary index into the OSPF interface table. This number corresponds to the index into the MIB-2 Interface Table which describes the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.1 | INTEGER | read-only | mandatory |
| nwIpOspfIfAdminStatus OBJECT-TYPE Sets the administrative state of OSPF on the IP router port for which the entry exists. enabled(3) causes OSPF to become active on the router port. disabled(2) causes OSPF to become inactive on the router port. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.2 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwIpOspfIfOperStatus OBJECT-TYPE Sets the administrative state of OSPF on the IP router port for which the entry exists. enabled(3) causes OSPF to become active on the router port. disabled(2) causes OSPF to become inactive on the router port. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.3 | INTEGER {other(1), disabled(2), enabled(3), pending-disable(4), pending-enable(5)} | read-only | mandatory |
| nwIpOspfIfOperationalTime OBJECT-TYPE Indicates the elapsed time, in hundredths of a second, that nwIpOspfIfAdminStatus has been in its current state. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.4 | TimeTicks | read-only | mandatory |
| nwIpOspfIfVersion OBJECT-TYPE Indicates the OSPF protocol revision level supported on the router port. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.5 | INTEGER | read-write | mandatory |
| nwIpOspfIfSnooping OBJECT-TYPE Controls the operation of OSPF Snooping on the IP router port for which the entry exists.OSPF Snooping is operating OSPF in passive mode, so it receives route information, builds and maintains a route information table, but does not advertise. enable (3) turns on OSPF Snooping. disable (2) turns it off. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.6 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwIpOspfIfType OBJECT-TYPE Specifies whether the attached network segment does or does not support broadcast media access. bma (2) indicates that route advertisements can be sent as broadcasts. nbma (3) indicates that route advertisements must be addresses directly to each neighbor. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.7 | INTEGER {other(1), bma(2), nbma(3)} | read-only | mandatory |
| nwIpOspfIfAclIdentifier OBJECT-TYPE Specifies the Access Control List ID of the access control list applied to OSPF traffic on the IP router port for which the entry exists. A value of 0 indicates that no Access List applies. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.8 | INTEGER | read-write | mandatory |
| nwIpOspfIfAclStatus OBJECT-TYPE Controls the operation of the access list configured for OSPF traffic on the IP router port for which the entry exists. enabled(3) causes the access list to be applied. disabled(2) causes the access list not to be applied. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.9 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwIpOspfIfCounters OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2 | |||
| nwIpOspfIfCtrTable OBJECT-TYPE This table contains the OSPF packet and byte counter for each configured OSPF router port. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1 | not-accessible | mandatory | |
| nwIpOspfIfCtrEntry OBJECT-TYPE Each entry specifies the OSPF packet and byte counter for for the router for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1 | not-accessible | mandatory | |
| nwIpOspfIfCtrIfIndex OBJECT-TYPE This is the primary index into the OSPF interface counter table. This number corresponds to the index into the MIB-2 Interface Table which describes the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.1 | INTEGER | read-only | mandatory |
| nwIpOspfIfCtrAdminStatus OBJECT-TYPE Sets the administrative state of the OSPF packet and byte counters on the IP router port for which the entry exists. enabled(3) causes these counters to become active on the router port. disabled(2) turns these counters off. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.2 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwIpOspfIfCtrReset OBJECT-TYPE Resets the OSPF packet and byte counters on the router port for which the entry exists. reset (2) resets the interface-specific counters to 0 and nwIpOspfIfCtrOperationalTime to 0. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.3 | INTEGER {other(1), reset(2)} | read-write | mandatory |
| nwIpOspfIfCtrOperationalTime OBJECT-TYPE Indicates the amount of time (# of time ticks) that the interface-specific OSPF packet and byte counters have been active on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.4 | TimeTicks | read-only | mandatory |
| nwIpOspfIfCtrInPkts OBJECT-TYPE Indicates the total number of OSPF packets that have been received, on the router port for which the entry exists, during nwIpOspfIfCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.5 | Counter | read-only | mandatory |
| nwIpOspfIfCtrOutPkts OBJECT-TYPE Indicates the total number of OSPF packets that have been transmitted, on the router port for which the entry exists, during nwIpOspfIfCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.6 | Counter | read-only | mandatory |
| nwIpOspfIfCtrFilteredPkts OBJECT-TYPE Indicates the total number of OSPF packets that have been administratively filtered, on the router port for which the entry exists, during nwIpOspfIfCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.7 | Counter | read-only | mandatory |
| nwIpOspfIfCtrDiscardPkts OBJECT-TYPE Indicates the total number of OSPF packets that have been discarded, on the router port for which the entry exists, during nwIpOspfIfCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.8 | Counter | read-only | mandatory |
| nwIpOspfIfCtrInBytes OBJECT-TYPE Indicates the total number of bytes in the OSPF packets that have been received, on the router port for which the entry exists, during nwIpOspfIfCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.9 | Counter | read-only | mandatory |
| nwIpOspfIfCtrOutBytes OBJECT-TYPE Indicates the total number of bytes in the OSPF packets that have been transmitted, on the router port for which the entry exists, during nwIpOspfIfCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.10 | Counter | read-only | mandatory |
| nwIpOspfIfCtrFilteredBytes OBJECT-TYPE Indicates the total number of bytes in the OSPF packets that have been administratively filtered, on the router port for which the entry exists, during nwIpOspfIfCtrOperationalTime | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.11 | Counter | read-only | mandatory |
| nwIpOspfIfCtrDiscardBytes OBJECT-TYPE Indicates the total number of bytes in the OSPF packets that have been discarded, on the router port for which the entry exists, during nwIpOspfIfCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.12 | Counter | read-only | mandatory |
| nwIpOspfDatabase OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.3 | |||
| nwIpOspfFilters OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.4 | |||
| nwIpFib OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5 | |||
| nwIpFibSystem OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.1 | |||
| nwIpRipRoutePriority OBJECT-TYPE Specifies the route priority assigned to routes learned by the RIP routing protocol. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.1.1 | INTEGER | read-write | mandatory |
| nwIpOSPFRoutePriority OBJECT-TYPE Specifies the route priority assigned to routes learned by the OSPF routing protocol. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.1.2 | INTEGER | read-write | mandatory |
| nwIpStaticRoutePriority OBJECT-TYPE Specifies the route priority assigned to routes learned by statically configured routes.. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.1.3 | INTEGER | read-write | mandatory |
| nwIpOspfFib OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2 | |||
| nwIpOspfFibControl OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.1 | |||
| nwIpOspfForward OBJECT-TYPE The total number of valid Cabletron IP OSPF FIB entries to include static, dynamic, RIP and BGP4 type routes. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.1.1 | INTEGER | read-only | mandatory |
| nwIpOspfLeakAllStaticRoutes OBJECT-TYPE Add all static routes in the IP FIB to the Cabletron IP OSPF FIB for advertisement in OSPF routing protocol announcements. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.1.2 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| nwIpOspfLeakAllRipRoutes OBJECT-TYPE Add all RIP routes in the IP FIB to the Cabletron IP OSPF FIB for advertisement in OSPF routing protocol announcements. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.1.3 | INTEGER | read-write | mandatory |
| nwIpOspfLeakAllBgp4Routes OBJECT-TYPE Add all BGP4 routes in the IP FIB to the Cabletron IP OSPF FIB for advertisement in OSPF routing protocol announcements. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.1.4 | INTEGER | read-write | mandatory |
| nwIpOspfFibEntries OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2 | |||
| nwIpOspfStaticTable OBJECT-TYPE A table of statically configured entries in the Cabletron IP OSPF FIB. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.1 | not-accessible | mandatory | |
| nwIpOspfStaticEntry OBJECT-TYPE A list of information for each static entry in the Cabletron IP OSPF FIB. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.1.1 | not-accessible | mandatory | |
| nwIpOspfStaticDest OBJECT-TYPE The network Address of a static route leaked from the IP FIB into the Cabletron IP OSPF FIB. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.1.1.1 | IpAddress | read-only | mandatory |
| nwIpOspfStaticForwardMask OBJECT-TYPE The network mask of a static route leaked from the IP FIB into the Cabletron IP OSPF FIB. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.1.1.2 | IpAddress | read-only | mandatory |
| nwIpOspfStaticNextHop OBJECT-TYPE The next hop address of a static route leaked from the IP FIB into the Cabletron IP OSPF FIB. A value of 0.0.0.0 indicates that packets for the external destination should be forwarded to the advertising router. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.1.1.3 | IpAddress | read-only | mandatory |
| nwIpOspfStaticMetric OBJECT-TYPE The Cabletron IP OSPF advertised cost of reaching the leaked static route. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.1.1.4 | INTEGER | read-write | mandatory |
| nwIpOspfStaticMetricType OBJECT-TYPE The Cabletron IP OSPF metric type to be advertised using OSPF: Autonomous System External type 1 (1) or Autonomous System External type 2 (2). | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.1.1.5 | INTEGER | read-write | mandatory |
| nwIpOspfStaticStatus OBJECT-TYPE By setting this OID to inactive for a particular static route, the static route will be added to the IP OSPF FIB but not advertised. Setting this OID to active for a particular static route, the static route will be advertised by the OSPF router. By setting this OID to delete for a particular static route, the entry will no longer be advertised using OSPF and will be deleted from the IP OSPF FIB. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.1.1.6 | INTEGER {inactive(1), active(2), delete(3)} | read-write | mandatory |
| nwIpOspfDynamicTable OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.2 | |||
| nwIpOspfRipTable OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.3 | |||
| nwIpOspfBgp4Table OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.4 | |||
| nwIpEndSystems OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6 | |||
| nwIpHostsSystem OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.1 | |||
| nwIpHostsTimeToLive OBJECT-TYPE Indicates the amount of time (number of minutes) that an entry can remain in the ARP cache. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.1.1 | INTEGER | read-only | mandatory |
| nwIpHostsRetryCount OBJECT-TYPE Indicates the maximum number of times IP Routing Services will retry each attempt to resolve a host address. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.1.2 | Counter | read-only | mandatory |
| nwIpHostsInterfaces OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2 | |||
| nwIpHostCtlTable OBJECT-TYPE This table contains the control information for maintaining a cache of IP host addresses on each router port. Note that the of actual entries are maintained by the IP Address Translation Table (Net-to-Media) of MIB 2. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1 | not-accessible | mandatory | |
| nwIpHostCtlEntry OBJECT-TYPE Each entry contains the control information for maintaining the cache on each router port. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1 | not-accessible | mandatory | |
| nwIpHostCtlIfIndex OBJECT-TYPE Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.1 | INTEGER | read-only | mandatory |
| nwIpHostCtlAdminStatus OBJECT-TYPE This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol specific MIBS. Setting this object has no effect. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.2 | INTEGER {other(1), disable(2), enable(3)} | read-write | mandatory |
| nwIpHostCtlOperStatus OBJECT-TYPE Indicates the current operating condition of the IP Host Address cache on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.3 | INTEGER {other(1), disabled(2), enabled(3), pending-disable(4), pending-enable(5)} | read-only | mandatory |
| nwIpHostCtlOperationalTime OBJECT-TYPE Indicates the elapsed time, in hundredths of a second, that nwIpHostCtlOperStatus has been in the current state. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.4 | TimeTicks | read-only | mandatory |
| nwIpHostCtlProtocol OBJECT-TYPE Controls the operation of the ARP protocol on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.5 | INTEGER {other(1), disable(2), enable(3)} | read-write | mandatory |
| nwIpHostCtlSnooping OBJECT-TYPE Controls ARP Snooping on the router port for which the entry exists. Given the ARP protocol is enabled, nwIpHostCtlProtocol=3, setting nwIpHostCtlIfSnooping to enabled (3) turns on ARP Snooping. When ARP Snooping is enabled the source IP and physical addresses of all ARP packets received on the router port are added to the MIB 2 Net-to-Media Table. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.6 | INTEGER {other(1), disable(2), enable(3)} | read-write | mandatory |
| nwIpHostCtlProxy OBJECT-TYPE Controls the operations of Proxy ARP on the router port for which the entry exists. Given the ARP protocol is enabled, nwIpHostCtlProtocol=3, setting nwIpHostCtlProxy to enabled (3) turns on Proxy ARP. When Proxy ARP is enabled on a router port, and an ARP request is received, requesting the address for an IP host whose network address is listed on the IP route table, then IP Routing Services sends a Proxy ARP response, with the physical address of the receiving router port in place of the requested host's physical address. Based on this proxy response, the requesting host will then forward packets to the router port, and IP Routing Services will then forward them to the correct destination. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.7 | INTEGER {other(1), disable(2), enable(3)} | read-write | mandatory |
| nwIpHostCtlCacheMax OBJECT-TYPE Indicates the maximum number of entry slots the cache can consist of. nwIpHostCtlCacheMax cannot be set to less than 16. Setting this value does not allocate any memory for the cache. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.8 | INTEGER | read-write | mandatory |
| nwIpHostCtlCacheSize OBJECT-TYPE Indicates the current number of entry slots in the cache. The cache automatically resizes to accommodate all entries up to the maximum number of entries set by nwIpHostCtlCacheMax. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.9 | INTEGER | read-only | mandatory |
| nwIpHostCtlNumStatics OBJECT-TYPE Indicates the total number of static entries in the cache on the router port for which the entry exists. Static entries remain in the cache until they are administratively removed. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.10 | Counter | read-only | mandatory |
| nwIpHostCtlNumDynamics OBJECT-TYPE Indicates the number of dynamic entries in the cache on the router port for which the entry exists. Dynamic entries area added and aged out by the ARP protocol. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.11 | Counter | read-only | mandatory |
| nwIpHostCtlCacheHits OBJECT-TYPE Indicates the number of times an entry in the cache has been used to successfully provide the physical address required to forward an IP packet on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.12 | Counter | read-only | mandatory |
| nwIpHostCtlCacheMisses OBJECT-TYPE Indicates the number of times the physical address required to forward an IP packet has not been found in the cache on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.13 | Counter | read-only | mandatory |
| nwIpHostsToMedia OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3 | |||
| nwIpHostMapTable OBJECT-TYPE The Ip Address translation table used for mapping an IP address to physical address, framing, port and circuit identifier, if applicable. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1 | not-accessible | mandatory | |
| nwIpHostMapEntry OBJECT-TYPE Each entry contains one IpAddress to 'physical' address equivalence, including a circuit identifier if applicable. Also provided is the framing and port number required to converse with this host. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1 | not-accessible | mandatory | |
| nwIpHostMapIfIndex OBJECT-TYPE This is the primary (major) index into the HostMap table. This number corresponds to the index into the MIB-2 Interfaces Group which describes the IP router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1.1 | INTEGER | read-only | mandatory |
| nwIpHostMapIpAddr OBJECT-TYPE The IpAddress corresponding to the media-dependent 'physical' address and circuit identifier (if applic). | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1.2 | IpAddress | read-only | mandatory |
| nwIpHostMapPhysAddr OBJECT-TYPE The media-dependent 'physical' address. The value of this object is 0 for entries indicating native-wan(8) framing. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1.3 | PhysAddress | read-write | mandatory |
| nwIpHostMapType OBJECT-TYPE Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the nwIpHostMapTable. That is, it effectively dissasociates the circuit identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant nwIpHostMapType object. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1.4 | INTEGER {other(1), invalid(2), dynamic(3), static(4), inactive(5)} | read-write | mandatory |
| nwIpHostMapCircuitID OBJECT-TYPE The identifier for the virtual circuit present on the interface. On an interface configured for Frame Relay, this number is the DLCI for the IP Address at the end of the circuit. For non-WAN interfaces, the value of this object is zero. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1.5 | INTEGER | read-write | mandatory |
| nwIpHostMapFraming OBJECT-TYPE Specifies the framing type required to converse with the host for which this entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1.6 | INTEGER {other(1), ethernet(2), snap(3), slip(5), localtalk(7), nativewan(8), encapenet(9), encapenetsnap(11), encaptrsnap(14), encapfddisnap(16), canonical(17)} | read-write | mandatory |
| nwIpHostMapPortNumber OBJECT-TYPE The unique value for the logical port number. It's value ranges between 1 and a maximum value which is dependent on both the number of interfaces in the system and the number of circuits present on interfaces which are of WAN type. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1.7 | INTEGER | read-only | mandatory |
| nwIpAccessControl OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.7 | |||
| nwIpAclValidEntries OBJECT-TYPE Indicates the number of valid entries that exist in the access control list table. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.1 | Gauge | read-only | mandatory |
| nwIpAclTable OBJECT-TYPE This table contains the access control list information for IP traffic. This table contains entries, each of which allows packet forwarding between source/destination pairs to be permitted or denied. The list is identified by the Access Control List ID. Each list may contain multiple entries ordered by sequence number. When an access control list is searched, it is searched in sequence number order and the first match found ends the search. If no match is found, access defaults to permitted. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2 | not-accessible | mandatory | |
| nwIpAclEntry OBJECT-TYPE Each entry contains IP source/destination access information. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1 | not-accessible | mandatory | |
| nwIpAclIdentifier OBJECT-TYPE This is the primary (major) index into the IP access control list table. This value identifies the access control list by a unique identifier arbitrarily assigned by the user. All entries that have the same value for nwIpAclIdentifier belong to the same access control list. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.1 | INTEGER | read-only | mandatory |
| nwIpAclSequence OBJECT-TYPE This is the secondary (minor) index into the IP access control list table. This number corresponds to a sequence number used to order multiple entries within the same access control list. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.2 | INTEGER | read-only | mandatory |
| nwIpAclPermission OBJECT-TYPE Specifies whether access is allowed or denied between the source and destination address pair. Note that source and destination are interchangeable when bi-directional control is selected. To remove an existing entry set nwIpAclPermission to invalid (2). Invalid entries disappear after reboot. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.3 | INTEGER {other(1), invalid(2), permit(3), deny(4), permit-bidirectional(5), deny-bidirectional(6)} | read-write | mandatory |
| nwIpAclMatches OBJECT-TYPE Indicates the number of matches on this entry that have resulted in the permit/deny access restriction being applied as part of the forwarding process. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.4 | Counter | read-only | mandatory |
| nwIpAclDestAddress OBJECT-TYPE Specifies the destination IP address used to compare for matches on the access control list. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.5 | IpAddress | read-write | mandatory |
| nwIpAclDestMask OBJECT-TYPE Specifies the mask to be applied to the destination address to determine the portion of the address used to compare for matches on the access control list. Only bits that are matching are used in the comparison. This allows for wild-carding and partial matching. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.6 | IpAddress | read-write | mandatory |
| nwIpAclSrcAddress OBJECT-TYPE Specifies the source address used to compare for matches on the access control list. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.7 | IpAddress | read-write | mandatory |
| nwIpAclSrcMask OBJECT-TYPE Specifies the mask to be applied to the source address to determine the portion of the address to be used to compare for matches on the access control list. Only bits that are matching are used in the comparison. This allows for wild-carding and partial matching. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.8 | IpAddress | read-write | mandatory |
| nwIpAclProtocol OBJECT-TYPE Specifies the IP protocols checked to compare for matches on the access control list. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.9 | INTEGER {other(1), all(2), icmp(3), udp(4), tcp(5)} | read-write | mandatory |
| nwIpAclPortNumber OBJECT-TYPE Specifies the port number used to compare for matches on the access control list. nwIpAclPortNumber only applies if nwIpAclProtocol is equal to 4 or 5, UDP or TCP nwIpAclPortNumber ranges from 0 to 65536. The value 0 is a wildcard which matches any port. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.10 | INTEGER | read-write | mandatory |
| nwIpFilters OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.8 | |||
| nwIpRedirector OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.9 | |||
| nwIpRedirectorSystem OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.9.1 | |||
| nwIpRedirectTable OBJECT-TYPE This table contains an entry for each UDP port configured for UDP broadcast redirection. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.9.1.1 | not-accessible | mandatory | |
| nwIpRedirectEntry OBJECT-TYPE Each entry contains the UDP port number of and IP Address to which UDP packets received as LAN broadcasts, should be redirected. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.9.1.1.1 | not-accessible | mandatory | |
| nwIpRedirectPort OBJECT-TYPE This is the primary index into the UDP redirector table, identifying the UDP port number of the packets that will be redirected. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.9.1.1.1.1 | INTEGER | read-only | mandatory |
| nwIpRedirectAddress OBJECT-TYPE Sets the IP address to which the UDP broadcast packets matching the UDP redirect port value (nwIpRedirectPort) will be forwarded. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.9.1.1.1.2 | IpAddress | read-write | mandatory |
| nwIpRedirectType OBJECT-TYPE Set this object to enable or disable the redirector feature for the UDP port specified by nwIpRedirectAddress. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.9.1.1.1.3 | INTEGER {forward(1), delete(2)} | read-write | mandatory |
| nwIpRedirectCount OBJECT-TYPE Indicates how many UDP broadcast packets have been redirected, as specified by this entry. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.9.1.1.1.4 | Counter | read-only | mandatory |
| nwIpRedirectorInterface OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.9.2 | |||
| nwIpEvent OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10 | |||
| nwIpEventLogConfig OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.1 | |||
| nwIpEventAdminStatus OBJECT-TYPE Sets the administrative state of IP event logging. enabled(3) causes the event log to become active. disabled(2) causes the event log to become inactive. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.1.1 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwIpEventMaxEntries OBJECT-TYPE Sets the administrative state of IP event logging. Enabled (3) causes the event log to become active. Disabled (2) causes the event log to become inactive. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.1.2 | INTEGER | read-write | mandatory |
| nwIpEventTraceAll OBJECT-TYPE Enabled (3) allows logging of all event types on all router ports for all protocols and components. Disabled (2) causes the filter table to specify which events to log. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.1.3 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwIpEventLogFilterTable OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2 | |||
| nwIpEventFilterTable OBJECT-TYPE This table contains an entry for each event filter configured for IP Routing Services events. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2.1 | not-accessible | mandatory | |
| nwIpEventFilterEntry OBJECT-TYPE Each entry describes an event filter which defines a particular type of event to be logged to the event log. The value of nwIpEventProtocol indicates the value used in either the nwRtgProtocolTable or the nwComponentTable in the Cabletron Routing Services MIB, which identifies the protocol to which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2.1.1 | not-accessible | mandatory | |
| nwIpEventFltrProtocol OBJECT-TYPE Indicates the value of the Cabletron Routing Services MIB nwRtgProtocolInstance or nwComponentRtgInstance which identifies the protocol involved in the event for which the event filter exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2.1.1.1 | INTEGER | read-only | mandatory |
| nwIpEventFltrIfNum OBJECT-TYPE Specifies the router port involved in the event for which the event filter exists. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2.1.1.2 | INTEGER | read-only | mandatory |
| nwIpEventFltrControl OBJECT-TYPE Set this value to 3 to add the entry to the event filter table. Set this value to 2 to remove the entry from the event filter table. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2.1.1.3 | INTEGER {other(1), delete(2), add(3)} | read-write | mandatory |
| nwIpEventFltrType OBJECT-TYPE This 6 bit mask specifies the types of events to be logged. By default all 6 bits are set to 1, indicating that all types of events are to be logged. Setting any bit to 0 removes an event type from this field and prevents that type of event from being logged.Setting any bit to 1 adds an event type to this field and enables that type of event to be logged. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2.1.1.4 | INTEGER {misc(1), timer(2), rcv(4), xmit(8), event(16), diags(32), error(64)} | read-write | mandatory |
| nwIpEventFltrSeverity OBJECT-TYPE Specifies the level of severity an event must meet in order to be logged. Controls the amount of event logging by ignoring events of a lower priority than specified by this filter value. `Highmed' ignores only events of the lowest severity. `Highlow' logs all events highest priority through lowest. `Highest' severity causes all events except those of the highest severity to be ignored. `Highmed' severity is the default setting which causes only events of the lowest severity to be ignored. `Highlow' severity logs all events, regardless of severity. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2.1.1.5 | INTEGER {highest(1), highmed(2), highlow(3)} | read-write | mandatory |
| nwIpEventFltrAction OBJECT-TYPE Specifies how the events are to be logged. Logging to the `log' stores the events in the event log table (nwIpEventFltrAction). Logging to `trap' sends events out through the trap mechanism. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2.1.1.6 | INTEGER {log(1), trap(2), log-trap(3)} | read-write | mandatory |
| nwIpEventLogTable OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3 | |||
| nwIpEventTable OBJECT-TYPE This table contains an entry for each event that has been logged. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1 | not-accessible | mandatory | |
| nwIpEventEntry OBJECT-TYPE Each entry contains the information about an event that has been logged to the event table. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1 | not-accessible | mandatory | |
| nwIpEventNumber OBJECT-TYPE An ordinal value assigned to the event for which the log entry exists. nwIpEventNumber is assigned so that each event in the event log can be uniquely identified by the value of nwIpEventNumber. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1.1 | INTEGER | read-only | mandatory |
| nwIpEventTime OBJECT-TYPE Indicates the time at which the event was logged to the event log. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1.2 | TimeTicks | read-only | mandatory |
| nwIpEventType OBJECT-TYPE Indicates the type of event that was logged. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1.3 | INTEGER {misc(1), timer(2), rcv(4), xmit(8), event(16), diags(32), error(64)} | read-only | mandatory |
| nwIpEventSeverity OBJECT-TYPE Indicates the severity that was assigned to the event. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1.4 | INTEGER {highest(1), highmed(2), highlow(3)} | read-only | mandatory |
| nwIpEventProtocol OBJECT-TYPE Indicates the value of the Cabletron Routing Services MIB nwRtgProtocolInstance or nwComponentInstance which indentifies the protocol or component that was involved in the event. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1.5 | INTEGER | read-only | mandatory |
| nwIpEventIfNum OBJECT-TYPE Indicates the router port that was involved in the event. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1.6 | INTEGER | read-only | mandatory |
| nwIpEventTextString OBJECT-TYPE Contains the actual text string that was logged. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1.7 | OCTET STRING | read-only | mandatory |
| nwIpWorkGroup OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11 | |||
| nwIpWgDefTable OBJECT-TYPE This table has an entry for each workgroup subnet definition. It is indexed by and arbitrary integer indentifier. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1 | not-accessible | mandatory | |
| nwIpWgDefEntry OBJECT-TYPE Each entry specifies the configuration and status of an individual work group. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1 | not-accessible | mandatory | |
| nwIpWgDefIdentifier OBJECT-TYPE An index into the definition table, unique to each entry, arbitrarily assigned by the user. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.1 | INTEGER | read-only | mandatory |
| nwIpWgDefHostAddress OBJECT-TYPE The IP address of the IP router host which applies to every interface included in the workgroup. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.2 | IpAddress | read-write | mandatory |
| nwIpWgDefSubnetMask OBJECT-TYPE The subnet mask for the IP address above, thereby defining the subnet which applies to every interface included in the workgroup. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.3 | IpAddress | read-write | mandatory |
| nwIpWgDefSecurity OBJECT-TYPE A security level which applies to this workgroup as a whole. Security applies in conjunction with the range table below, which locks hosts to interfaces and/or physical address. Packets are filtered out if security is violated. For a high (4) security workgroup, a host must reside on the interface and with the physical address configured in a range table entry. For medium (3) security a host must reside on a configured interface, but unless a physical address is also specified in that range entry, the physical address is not constrained. For low (2) security a host is free to reside on any interface with any physical address if not configured in the range table, but if configured must match a configured entry. If security is none (1) the range table does not apply. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.4 | INTEGER {none(1), low(2), medium(3), high(4)} | read-write | mandatory |
| nwIpWgDefFastPath OBJECT-TYPE Enabled (3) provides a fast path for packets through the router when both source and destination are within this workgroup - done mostly by skipping IP header validation. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.5 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwIpWgDefRowStatus OBJECT-TYPE This status instance does not support `createAndGo.' A row entry should be created by a set of `createAndWait' which brings the status to `notReady.' The missing row info may then be supplied by setting nwIpWgDefHostAddr and nwIpWgDefSubnetMask. If defaults are OK for nwIpWgDefFastPath and nwIpWgDefSecurity this status instance may then be set to `active' to activate the row. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.6 | INTEGER {active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)} | read-write | mandatory |
| nwIpWgDefOperStatus OBJECT-TYPE The operational status of this workgroup definition entry. It will be `disabled' if this entry's row status is not active. It will be `subnetConflict' if there is a conflict with an existing active entry in this workgroup definition table. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.7 | INTEGER {ok(1), disabled(2), subnetConflict(3), internalError(4)} | read-only | mandatory |
| nwIpWgDefNumActiveIntf OBJECT-TYPE The number of interfaces (ports) in this workgroup which have an operational status nwIpWgIfOperStatus of `OK' in the IP Work Group Interface table below. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.8 | INTEGER | read-only | mandatory |
| nwIpWgDefNumTotalIntf OBJECT-TYPE The number of interfaces (ports) in this workgroup which have an administrative status nwIpWgIfRowStatus of `active' in the IP Work Group Interface table below. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.9 | INTEGER | read-only | mandatory |
| nwIpWgIfTable OBJECT-TYPE This table contains an entry for each port in a workgroup. It is indexed by the workgroup identifier and the MIB-II interface indentifier. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2 | not-accessible | mandatory | |
| nwIpWgIfEntry OBJECT-TYPE Each entry specifies the association of a router port to a defined workgroup. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1 | not-accessible | mandatory | |
| nwIpWgIfDefIdent OBJECT-TYPE The workgroup identifier. This is the primary index into the IP Work Group Interface Table, matching the index into the Definition Table above. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1.1 | INTEGER | read-only | mandatory |
| nwIpWgIfIfIndex OBJECT-TYPE The interface number. This is the secondary index into the IP Work Group Interface Table, matching the primary index into the MIB-2 IfTable which describes the router port. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1.2 | INTEGER | read-only | mandatory |
| nwIpWgIfNumActiveHosts OBJECT-TYPE The number of hosts known to be active on this interface in this workgroup. These hosts are visible in the IP Work Group Host Table below. Hosts age out and become inactive in approximately 10 minutes if not rediscovered thrugh ARP. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1.3 | INTEGER | read-only | mandatory |
| nwIpWgIfNumKnownHosts OBJECT-TYPE The number of hosts seen on this interface in this workgroup since this interface entry was last activated. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1.4 | Counter | read-only | mandatory |
| nwIpWgIfRowStatus OBJECT-TYPE This status instance supports `createAndGo' semantics to create an active entry. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1.5 | INTEGER {active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)} | read-write | mandatory |
| nwIpWgIfOperStatus OBJECT-TYPE The operational status of this interface (port) entry. It will be `disabled' if this entry's row status is not active. It will be `workgroupInvalid' if either there is no workgroup defined for this entry's nwIpWgIfDefIdent or if the operational status for the workgroup in the definition table is not ok. It will be `addressConflict' if an entry in nwIpAddressTable is a conflict with the workgroup address of the definition. If there is no conflict and this entry's row status has just been activated, this operational status will be `resetRequired'. It will be `linkDown' if there are no physical connections on this interface and `routingDown' if routing or forwarding has been adminstratively disabled. If unspecified internal problems occur the status will be `internalError'. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1.6 | INTEGER {ok(1), disabled(2), workgroupInvalid(3), addressConflict(4), resetRequired(5), linkDown(6), routingDown(7), internalError(8)} | read-only | mandatory |
| nwIpWgRngTable OBJECT-TYPE This table locks ranges of IP hosts (addresses) to ports. Entries in this table represent explicit permissions. The host(s) represented by a range entry may exchange packets with this router if it (they) match the port specified in the entry. Optionally physical address may be locked as well. This table functions in concert with the workgroup security level as defined in the IP Work Group Definition Table entry. For hosts not entered in this table the default for a low security workgroup is to permit packet exchange, whereas the default for medium and high security is to deny packet exchange. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.3 | not-accessible | mandatory | |
| nwIpWgRngEntry OBJECT-TYPE Each entry configures a range of host IP addresses to be associated with a given interface ( port ). If the range consists of a single host address the entry may optionally specify a physical address. The entry is indexed by the range and the port. Ranges may not overlap. However a range may be duplicated on different ports. The address range must lie within the subnet defined for a given workgroup and thus the entry acquires the security level of that workgroup. If security is violated, packets to and from a given host IP address will be filtered out passing through the router. The source and destination IP packet addresses are checked against ranges in the range table during packet forwarding and must match as follows: For a high (4) security workgroup, a host must match a single host range entry - it must reside on the port with the physical address as configured in that entry. For a medium (3) security workgroup, a host must match a range entry in that it resides on that port, but unless a physical address is also specified in that entry, the physical address is not constrained. For a low (2) security workgroup, a host is free to reside on any port with any physical address as long as its IP address does not lie within the range of any entry in the range table, but if it does fall in a range then it must completely match that entry, or another entry with the duplicate range. Match completely means match the port and, if a physical address is specified, match that as well. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.3.1 | not-accessible | mandatory | |
| nwIpWgRngBegHostAddr OBJECT-TYPE The beginning (lower) IP address of the address range. This is the primary index into the IP Work Group Range Table. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.3.1.1 | IpAddress | read-only | mandatory |
| nwIpWgRngEndHostAddr OBJECT-TYPE The ending (higher) IP address of the address range. This is the secondary index of the IP Work Group Range Table. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.3.1.2 | IpAddress | read-only | mandatory |
| nwIpWgRngIfIndex OBJECT-TYPE The interface number. This is the tertiary index into the IP Work Group Interface Table, matching the primary index into the MIB-2 IfTable which describes the router port. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.3.1.3 | INTEGER | read-only | mandatory |
| nwIpWgRngPhysAddr OBJECT-TYPE The physical address of the host with the IP address given in the nwIpWgRngBegHostAddr for this conceptual row entry. Only single host range entry in which nwIpWgRngEndHostAddr is the same as nwIpWgRngBegHostAddr may set a physical address. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.3.1.4 | OCTET STRING | read-write | mandatory |
| nwIpWgRngRowStatus OBJECT-TYPE This status instance supports `createAndGo' semantics to create an active entry. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.3.1.5 | INTEGER {active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)} | read-write | mandatory |
| nwIpWgRngOperStatus OBJECT-TYPE The operational status of this range table entry. It will be `disabled' if this entry's row status is not active. It will be `workgroupInvalid' if either there is no workgroup or if the operational status for the workgroup in the definition table associated with this address range is not ok. It will be `interfaceInvalid' if this interface is not in the workgroup interface table or if operational status of the interface entry is not ok. It will be `physAddrRequired' if the security level of the associated workgroup is high and no physical address has been specified for this entry. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.3.1.6 | INTEGER {ok(1), disabled(2), workgroupInvalid(3), interfaceInvalid(4), physAddrRequired(5), internalError(6)} | read-only | mandatory |
| nwIpWgHostTable OBJECT-TYPE A read only status table for hosts in workgroups. It has the information similar to a net-to-media table. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.4 | not-accessible | mandatory | |
| nwIpWgHostEntry OBJECT-TYPE Each entry shows a workgroup host. Entry is indexed by IP address and interface (port). It gives the workgroup and the physical address found for the host. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.4.1 | not-accessible | mandatory | |
| nwIpWgHostHostAddr OBJECT-TYPE The host IP address. This is the primary index to the IP Work Group Host Table. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.4.1.1 | IpAddress | read-only | mandatory |
| nwIpWgHostIfIndex OBJECT-TYPE The interface (port) number. This is the secondary index to the IP Work Group Host Table, matching the primary index to the MIB-2 IfTable which describes the router port. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.4.1.2 | INTEGER | read-only | mandatory |
| nwIpWgHostDefIdent OBJECT-TYPE The workgroup identifier. This corresponds to the primary index into the IP Work Group Interface Table. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.4.1.3 | INTEGER | read-only | mandatory |
| nwIpWgHostPhysAddr OBJECT-TYPE The physical address of the host with the IP address given in the nwIpWgHostHostAddr for this conceptual row entry. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.4.1.4 | OCTET STRING | read-only | mandatory |
| nwIpWgHostStatus OBJECT-TYPE This status of the host with respect to the workgroup. The host may be `unknown' if ARP has not discovered on which port it resides. The status of `invalid-multiple' means the same host IP address was later found duplicated on another port. The status of `invalid-physaddr' means the host matched an entry in the IP Work Group Range Table with respect to range and port, but did not match that entry for physical address. If the workgroup was high security this status would result even if no physical address was given in the range entry. The status of `invalid-range' could either mean that, in a high or medium security workgroup, the host was not in the range of any entry in the IP WORK GROUP Range Table, or that it was not in the range of an entry with a matching port. The status of `invalid-interface' could mean the port was physically down or just not in service in the IP Work Group Interface Table. The status of `invalid-workgroup' could mean the workgroup does not exist or is not in service in the IP Work Group Definition Table. The status of `invalid-expired' means the host became inactive and aged out on the port on which it was learned. | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.4.1.5 | INTEGER {other(1), unknown(2), valid(3), invalid-multiple(4), invalid-physaddr(5), invalid-range(6), invalid-interface(7), invalid-workgroup(8), invalid-expired(9)} | read-only | mandatory |
| nwIpClientServices OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12 |