CTRON-FRONTPANEL-MIB
- Registered at
- 1.3.6.1.4.1.52.4.1.5.5.1
- Namespace
- enterasys
- Source file
CTRON-FRONTPANEL-MIB- Digest
sha256:d56d6d9e7a7a2bd45e97541d8b627e6debf7211b9f39b2adc63e1d8a9b4164b6
Imports
| From | Symbols |
|---|---|
| CTRON-MIB-NAMES | ctFpRedundancy |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CTRON-FRONTPANEL-MIB CTRON-MIB-NAMES CTRON-OIDS SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ctFpRedund OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.5.5.1 | |||
| ctFpRedundReset OBJECT-TYPE If this object is set to Reset it will cause a reset of the front panel redundancy. Setting this object to NoReset will do nothing. This object will always be read as NoReset. | 1.3.6.1.4.1.52.4.1.5.5.1.1 | INTEGER {noReset(1), reset(2)} | read-write | mandatory |
| ctFpRedundPollInterval OBJECT-TYPE Get/Set the number of seconds between polls for front panel redundancy. | 1.3.6.1.4.1.52.4.1.5.5.1.2 | INTEGER | read-write | mandatory |
| ctFpRedundRetrys OBJECT-TYPE Get/Set the the number of unanswered polls allowed for the front panel redundancy before it switches ports. | 1.3.6.1.4.1.52.4.1.5.5.1.3 | INTEGER | read-write | mandatory |
| ctFpRedundNumAddr OBJECT-TYPE Get the number of IP Addresses associated with front panel redundancy. | 1.3.6.1.4.1.52.4.1.5.5.1.4 | INTEGER | read-only | mandatory |
| ctFpRedundAddAddr OBJECT-TYPE Add an IP Address to the polling list for the front panel redundancy. | 1.3.6.1.4.1.52.4.1.5.5.1.5 | IpAddress | read-write | mandatory |
| ctFpRedundDelAddr OBJECT-TYPE Delete an IP Address from the polling list for the front panel redundancy. | 1.3.6.1.4.1.52.4.1.5.5.1.6 | IpAddress | read-write | mandatory |
| ctFpRedundActivePort OBJECT-TYPE Get/Set the front panel port you want to be active when front panel redundancy is enabled. | 1.3.6.1.4.1.52.4.1.5.5.1.7 | INTEGER | read-write | mandatory |
| ctFpRedundEnable OBJECT-TYPE If this object is set to enable, the front panel redundancy will be activated. If this object is set to disable, the front panel redundancy will be deactivated. When read, this object will returns the state of the object based on the last request made. | 1.3.6.1.4.1.52.4.1.5.5.1.8 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| ctFpRedundAddrTable OBJECT-TYPE | 1.3.6.1.4.1.52.4.1.5.5.1.9 | not-accessible | mandatory | |
| ctFpRedundAddrEntry OBJECT-TYPE | 1.3.6.1.4.1.52.4.1.5.5.1.9.1 | not-accessible | mandatory | |
| ctFpRedundAddrId OBJECT-TYPE A unique value identifying an element in a sequence of member IP Addresses which belong to the front panel redundancy. This value goes from 1 to the maximum number of IP Addresses which may be included in front panel redundancy. | 1.3.6.1.4.1.52.4.1.5.5.1.9.1.1 | INTEGER (1..65535) | read-only | mandatory |
| ctFpRedundAddrIPAddr OBJECT-TYPE Returns an IP Address associated with the front panel redundancy. | 1.3.6.1.4.1.52.4.1.5.5.1.9.1.2 | IpAddress | read-only | mandatory |