CTRON-ETWMIM-MIB
- Registered at
- 1.3.6.1.4.1.52.4.1.1.4.1.11.3.6.1.4.1.52.4.1.1.4.1.21.3.6.1.4.1.52.4.1.1.4.1.31.3.6.1.4.1.52.4.1.1.4.1.41.3.6.1.4.1.52.4.1.1.4.1.51.3.6.1.4.1.52.4.1.1.4.1.61.3.6.1.4.1.52.4.1.1.4.1.71.3.6.1.4.1.52.4.1.1.4.1.81.3.6.1.4.1.52.4.1.1.4.1.9
- Namespace
- enterasys
- Source file
CTRON-ETWMIM-MIB- Digest
sha256:cd6fbf6d818638e8674747d2c35ea028f67e2f7fb09e45c571e6510856e923d8
Imports
| From | Symbols |
|---|---|
| CTRON-MIB-NAMES | ctPModuleETWMIM |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CTRON-ETWMIM-MIB CTRON-MIB-NAMES CTRON-OIDS SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| etwDbExist OBJECT-TYPE Denotes whether a T1 daughter board is attached to the Etwmim card being managed | 1.3.6.1.4.1.52.4.1.1.4.1.1 | INTEGER {exists(1), no-exists(2)} | read-only | mandatory |
| etwDbEnabled OBJECT-TYPE This object exists if etwDbExist is 1. Setting this object to 1 will cause the WAN port to use the daughterboard T1 port. Setting this object to 2 will cause the WAN port to use the synchronous port | 1.3.6.1.4.1.52.4.1.1.4.1.2 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| etwDbFracToggle OBJECT-TYPE This object exists if etwDbExist is 1. Setting this object to 1 will cause the T1 fractional table to be updated with the new values, as entered. Setting this object to 2, will cause the T1 fractional table to be the table as it is being entered. Setting this object to 3, will cause the T1 fractional table to be the table that is currently in use, regardless of any changes being entered. Setting this object to 4, will cause any changes that have been made to the fractional table since the last update-table to be deleted. | 1.3.6.1.4.1.52.4.1.1.4.1.3 | INTEGER {update-table(1), display-new(2), display-old(3), restore-old(4)} | read-write | mandatory |
| etwFWRev OBJECT-TYPE Denotes the revision of firmware in the module. The format of the string is xx.xx.xx, where the first pair indicates version, and the second pair indicates revision. | 1.3.6.1.4.1.52.4.1.1.4.1.4 | OCTET STRING (SIZE(8)) | read-only | mandatory |
| etwHWRev OBJECT-TYPE Denotes the revision of hardware. | 1.3.6.1.4.1.52.4.1.1.4.1.5 | INTEGER | read-only | mandatory |
| etwEpimEnabled OBJECT-TYPE This object gives the status of the EPIM port on the etwmim. A value of 1 indicates that the hardware has been set to use the Epim port for the ethernet connection. A value of 2 indicates that the hardware has been set to use the A channel for the ethernet connection | 1.3.6.1.4.1.52.4.1.1.4.1.6 | INTEGER {enabled(1), disabled(2)} | read-only | mandatory |
| etwEpimType OBJECT-TYPE Identifies the type of EPIM that is present in the EPIM slot. The value is allocated in the Ctron naming tree. | 1.3.6.1.4.1.52.4.1.1.4.1.7 | OBJECT IDENTIFIER | read-only | mandatory |
| etwEpimLink OBJECT-TYPE This object will indicate whether a link is established on the EPIM link. A value of 1 indicates that a link is established. A value of 2 indicates that a link is not established. A value of 3 indicates that the status of the link is unknown or not valid for the type of Epim installed. | 1.3.6.1.4.1.52.4.1.1.4.1.8 | INTEGER {link-established(1), link-not-established(2), link-unknown(3)} | read-only | mandatory |
| etwClearNvramOnBoot OBJECT-TYPE When set to a 1, the system will clear all persistant objects, except for the download objects, from nvram on the next system boot | 1.3.6.1.4.1.52.4.1.1.4.1.9 | INTEGER | read-write | mandatory |