CTRON-COMMON-MIB
- Registered at
- 1.3.6.1.4.1.52.1.6.1.21.3.6.1.4.1.52.1.6.1.31.3.6.1.4.1.52.1.6.1.41.3.6.1.4.1.52.1.6.2.31.3.6.1.4.1.52.1.6.2.61.3.6.1.4.1.52.1.6.2.71.3.6.1.4.1.52.1.6.2.81.3.6.1.4.1.52.1.6.2.91.3.6.1.4.1.52.1.6.2.101.3.6.1.4.1.52.1.6.3.1
- Namespace
- enterasys
- Source file
CTRON-COMMON-MIB- Digest
sha256:b07a85df4e7ebc0ba9ddebedf73e55a86d65383acbc433d012f17741eafe017c
Imports
| From | Symbols |
|---|---|
| IRM-OIDS | commonRev1, dl, subSysDevice, subSysMMAC, ups |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CTRON-COMMON-MIB CTRON-OIDS IRM-OIDS SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| deviceType OBJECT-TYPE The type of management board. | 1.3.6.1.4.1.52.1.1.1.1 | INTEGER {other(1), iRM2(176), iRBM(177), iRM3(178), tRMBM-R(179), tRMBM-S(180), emm-E(185), tRMM(187), trmMim(190), mrxi24(65569), mrxi22(65570), mrxi34(65571), mrxi38(65572)} | read-only | mandatory |
| deviceName OBJECT-TYPE A textual description on the entity managed by the resident agent. It is mandatory that this only con- tain printable ASCII characters. | 1.3.6.1.4.1.52.1.1.1.2 | DisplayString | read-write | mandatory |
| deviceIPAddress OBJECT-TYPE The Network address, in this case the IP address, of the device. This object is required for use by the Local Management Interface. | 1.3.6.1.4.1.52.1.1.1.3 | IpAddress | read-write | mandatory |
| deviceTime OBJECT-TYPE The current time of day, in 24 hour format, as measured by the device. The representation shall use the standard HHMMSS format. | 1.3.6.1.4.1.52.1.1.1.4 | DisplayString (SIZE(8)) | read-write | mandatory |
| deviceDate OBJECT-TYPE The current date, as measured by the device. The representation shall use the standard MMDDYYYY format. | 1.3.6.1.4.1.52.1.1.1.5 | DisplayString (SIZE(8)) | read-write | mandatory |
| fnb2 OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.6.1.2 | |||
| fnbTR OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.6.1.2.1 | |||
| fnbTRTable OBJECT-TYPE A list of entries that provide connection status of Token Ring subsystems, for the FNB. | 1.3.6.1.4.1.52.1.6.1.2.1.1 | not-accessible | mandatory | |
| fnbTREntry OBJECT-TYPE An entry in the fnbTRTable containing objects that provide FNB connection status for a Token Ring sub- system. | 1.3.6.1.4.1.52.1.6.1.2.1.1.1 | not-accessible | mandatory | |
| fnbTRIndex OBJECT-TYPE An unique value for each Token Ring subsystem. Its value ranges between 1 and chassisSlots. The value for each interface must remain constant, at least, from one re-initialization of the entity's network management system to the next re-initialization. | 1.3.6.1.4.1.52.1.6.1.2.1.1.1.1 | INTEGER | read-only | mandatory |
| fnbConnectLeft OBJECT-TYPE The Connected Left board (board n + 1) has the following states: Detached == 1 (Management (only management) detached, read/write). Attached == 2 (Management/AutoMode attached, read/write). Faulted == 3 (Management/AutoMode tried to attach but failed READ ONLY). | 1.3.6.1.4.1.52.1.6.1.2.1.1.1.2 | INTEGER {detached(1), attached(2), faulted(3)} | read-write | mandatory |
| fnbConnectRight OBJECT-TYPE The Connected Right board (board n - 1) has the following states: Detached == 1 (Management (only management) detached, read/write). Attached == 2 (Management/AutoMode attached, read/write ). Faulted == 3 (Management/AutoMode tried to attach but failed, READ ONLY). | 1.3.6.1.4.1.52.1.6.1.2.1.1.1.3 | INTEGER {detached(1), attached(2), faulted(3)} | read-write | mandatory |
| fnbBypass OBJECT-TYPE Denotes the bypass status of the current Token Ring board. Bypassed means the board is NOT attached to the FNB. | 1.3.6.1.4.1.52.1.6.1.2.1.1.1.4 | INTEGER {off(1), on(2)} | read-write | mandatory |
| fnbRPBypass OBJECT-TYPE Denotes the Ring Port bypass status of the current Token Ring board. If this capability is not available on this board, the value 'other' is returned when read, and BADSETINFO when written. | 1.3.6.1.4.1.52.1.6.1.2.1.1.1.5 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| fnbCSMACD OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.6.1.2.2 | |||
| fnbCSMACDTable OBJECT-TYPE A list of entries that provide connection status of CSMA/CD subsystems, for the FNB. | 1.3.6.1.4.1.52.1.6.1.2.2.1 | not-accessible | mandatory | |
| fnbCSMACDEntry OBJECT-TYPE An entry in the fnbCSMACDTable containing objects that provide FNB connection status for a CSMA/CD subsystem. | 1.3.6.1.4.1.52.1.6.1.2.2.1.1 | not-accessible | mandatory | |
| fnbCSMACDIndex OBJECT-TYPE An unique value for each CSMACD subsystem. Its value ranges between 1 and chassisSlots. The value for each interface must remain constant, at least, from one re-initialization of the entity's network management system to the next re-initialization. | 1.3.6.1.4.1.52.1.6.1.2.2.1.1.1 | INTEGER | read-write | mandatory |
| fnbConnect OBJECT-TYPE Denotes the connection status of the CSMA/CD board to the inter-RIC bus. | 1.3.6.1.4.1.52.1.6.1.2.2.1.1.2 | INTEGER {connectB(1), connectC(2), disconnect(3), connectA(4), subnetB(5), subnetC(6), multiChannel(7), frontPanel(8)} | read-write | mandatory |
| fnbPortChanges OBJECT-TYPE Denotes the number of times any port on the given MIM has changed it's connection to the inter-RIC bus. | 1.3.6.1.4.1.52.1.6.1.2.2.1.1.3 | Counter | read-only | mandatory |
| fnbPortConnect OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.6.1.2.3 | |||
| fnbPortConnectTable OBJECT-TYPE This table is used to control port association on ethernet devices. Only those boards that support port switching will be listed in this table. | 1.3.6.1.4.1.52.1.6.1.2.3.1 | not-accessible | mandatory | |
| fnbPortConnectEntry OBJECT-TYPE Describes a specific port connection entry. | 1.3.6.1.4.1.52.1.6.1.2.3.1.1 | not-accessible | mandatory | |
| fnbPortConnectBoardIndex OBJECT-TYPE An instance of a board for which this port assignment relationship exists. | 1.3.6.1.4.1.52.1.6.1.2.3.1.1.1 | INTEGER | read-only | mandatory |
| fnbPortConnectPortIndex OBJECT-TYPE An instance of a port for which this assignment relationship exists. | 1.3.6.1.4.1.52.1.6.1.2.3.1.1.2 | INTEGER | read-only | mandatory |
| fnbPortConnectPortAssignment OBJECT-TYPE The specific channel that the port is assigned. | 1.3.6.1.4.1.52.1.6.1.2.3.1.1.3 | INTEGER {connectA(1), connectB(2), connectC(3)} | read-write | mandatory |
| fnbPortConnectCompID OBJECT-TYPE This is the component ID as defined in the chassis MIB that this port is associated with. These components will be repeater components. | 1.3.6.1.4.1.52.1.6.1.2.3.1.1.4 | INTEGER | read-only | mandatory |
| fnbPortConnectionChanges OBJECT-TYPE Maintains the number of times any port within the mangement domain of this MIM changes it's port assignment. | 1.3.6.1.4.1.52.1.6.1.2.3.2 | Counter | read-only | mandatory |
| chassis OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.6.1.3 | |||
| chassisHWRev OBJECT-TYPE Define the hardware revision of the device or sys- tem chassis. | 1.3.6.1.4.1.52.1.6.1.3.1 | INTEGER | read-only | mandatory |
| chassisType OBJECT-TYPE Denotes the type of chassis. | 1.3.6.1.4.1.52.1.6.1.3.2 | INTEGER {other(1), mMAC8FNB(2), mMAC5FNB(3), mMAC3FNB(4), mINIMMAC(5), mRXI(6), m3FNB(7), m5FNB(8), m8FNB(9), nonFNB(10), mMAC3FNBS(11), mMAC5FNBS(12), mMAC8FNBS(13), m8FNBS(14)} | read-only | mandatory |
| chassisSlots OBJECT-TYPE Denotes the number of available chassis slots. | 1.3.6.1.4.1.52.1.6.1.3.3 | INTEGER | read-only | mandatory |
| chassisFNB OBJECT-TYPE Denotes the presence or absence of the FNB. | 1.3.6.1.4.1.52.1.6.1.3.4 | INTEGER {absent(1), present(2)} | read-only | mandatory |
| chassisAlarmEna OBJECT-TYPE Allow an audible alarm to be either enabled or dis- abled. | 1.3.6.1.4.1.52.1.6.1.3.5 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| chassisAlarmState OBJECT-TYPE Denotes the current condition of the power supply fault detection circuit. Setting a value of chassisNoFaultCondition(1) disables the current chassis alarm condition, and stops the current audible alarm from sounding. Setting a value of chassisFaultCondition(2) is not allowed. This object will read with the value of chassisNoFaultCondition(1) when the chassis is currently operating with no power faults detected. This object will read with the value of chassisFaultCondition(2) when the chassis is currently in a power fault condition. | 1.3.6.1.4.1.52.1.6.1.3.6 | INTEGER {chassisNoFaultCondition(1), chassisFaultCondition(2)} | read-write | mandatory |
| environment OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.6.1.4 | |||
| powerTable OBJECT-TYPE A list of power supply entries. | 1.3.6.1.4.1.52.1.6.1.4.1 | not-accessible | mandatory | |
| powerEntry OBJECT-TYPE An entry in the powerTable providing objects for a power supply. | 1.3.6.1.4.1.52.1.6.1.4.1.1 | not-accessible | mandatory | |
| powerSupplyNum OBJECT-TYPE Denotes the power supply that may have failed. | 1.3.6.1.4.1.52.1.6.1.4.1.1.1 | INTEGER | read-only | mandatory |
| powerSupplyState OBJECT-TYPE Denotes the power supply's state. | 1.3.6.1.4.1.52.1.6.1.4.1.1.2 | INTEGER {infoNotAvailable(1), notInstalled(2), installedAndOperating(3), installedAndNotOperating(4)} | read-only | mandatory |
| powerSupplyId OBJECT-TYPE Identifies the type of power supply. For example, this could be used to identify power supplies which support additional remote management capabilities. | 1.3.6.1.4.1.52.1.6.1.4.1.1.3 | OBJECT IDENTIFIER | read-only | mandatory |
| powerSupplyRedun OBJECT-TYPE Identifies whether power redundancy is available within the chassis. Devices that do not support power supply redundancy, will return infoNotAvailable. | 1.3.6.1.4.1.52.1.6.1.4.1.1.4 | INTEGER {redundancyAvail(1), redundancyNotAvail(2), infoNotAvailable(3)} | read-only | mandatory |
| powerSupplyRemoteDisable OBJECT-TYPE Provides Enable/Disable control of the power supply. For devices that do not support this capability, a set attempt will return BADVALUE, and a read will always return infoNotAvailable. | 1.3.6.1.4.1.52.1.6.1.4.1.1.5 | INTEGER {enable(1), disable(2), infoNotAvailable(3)} | read-write | mandatory |
| nB55 OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.6.2.3 | |||
| nB55HWAddress OBJECT-TYPE The device's MAC address. | 1.3.6.1.4.1.52.1.6.2.3.1 | PhysAddress | read-only | mandatory |
| nB55HWRev OBJECT-TYPE Denotes the revision of the nB55 board. A value of one denotes Revision 1, a value of two denotes Revi- sion 2, and so on. | 1.3.6.1.4.1.52.1.6.2.3.2 | INTEGER | read-only | mandatory |
| nB55FWRev OBJECT-TYPE Denotes the revision of firmware in the module. The first octets provides the version, and the second provides the revision. | 1.3.6.1.4.1.52.1.6.2.3.3 | OCTET STRING (SIZE(2)) | read-only | mandatory |
| mRXI OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.6.2.6 | |||
| mRXIHWAddress OBJECT-TYPE The device's MAC address. | 1.3.6.1.4.1.52.1.6.2.6.1 | PhysAddress | read-only | mandatory |
| mRXIHWRev OBJECT-TYPE Denotes the revision of the mRXI board. A value of one denotes Revision 1, a value of two denotes Revi- sion 2, and so on. | 1.3.6.1.4.1.52.1.6.2.6.2 | INTEGER | read-only | mandatory |
| mRXIFWRev OBJECT-TYPE Denotes the revision of firmware in the module. The first octets provides the version, and the second provides the revision. | 1.3.6.1.4.1.52.1.6.2.6.3 | OCTET STRING (SIZE(2)) | read-only | mandatory |
| iRM3 OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.6.2.7 | |||
| iRM3HWAddress OBJECT-TYPE The device's MAC address. | 1.3.6.1.4.1.52.1.6.2.7.1 | PhysAddress | read-only | mandatory |
| iRM3HWRev OBJECT-TYPE Denotes the revision of the IRM3 board. A value of one denotes Revision 1, a value of two denotes Revi- sion 2, and so on. | 1.3.6.1.4.1.52.1.6.2.7.2 | INTEGER | read-only | mandatory |
| iRM3FWRev OBJECT-TYPE Denotes the revision of firmware in the module. The first octets provides the version, and the second provides the revision. | 1.3.6.1.4.1.52.1.6.2.7.3 | OCTET STRING (SIZE(2)) | read-only | mandatory |
| iRM3PortAssoc OBJECT-TYPE Controls how front panel ports are associated with the Irm3. | 1.3.6.1.4.1.52.1.6.2.7.4 | INTEGER {aoffFrp(5), arpFoff(6)} | read-write | mandatory |
| iRM3BPSupport OBJECT-TYPE Denotes whether or not Backplane Protocol Support is present in the current version of the IRM3. | 1.3.6.1.4.1.52.1.6.2.7.5 | INTEGER {notSupported(1), supported(2)} | read-only | mandatory |
| tRMM OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.6.2.8 | |||
| tRMMHWAddress OBJECT-TYPE The device's MAC address. | 1.3.6.1.4.1.52.1.6.2.8.1 | PhysAddress | read-only | mandatory |
| tRMMHWRev OBJECT-TYPE Denotes the revision of the tRMM board. A value of one denotes Revision 1, a value of two denotes Revi- sion 2, and so on. | 1.3.6.1.4.1.52.1.6.2.8.2 | INTEGER | read-only | mandatory |
| tRMMFWRev OBJECT-TYPE Denotes the revision of firmware in the module. The first octets provides the version, and the second provides the revision. | 1.3.6.1.4.1.52.1.6.2.8.3 | OCTET STRING (SIZE(2)) | read-only | mandatory |
| eMME OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.6.2.9 | |||
| eMMEHWAddress OBJECT-TYPE The device's MAC address. | 1.3.6.1.4.1.52.1.6.2.9.1 | PhysAddress | read-only | mandatory |
| eMMEHWRev OBJECT-TYPE Denotes the revision of the eMME board. A value of one denotes Revision 1, a value of two denotes Revi- sion 2, and so on. | 1.3.6.1.4.1.52.1.6.2.9.2 | INTEGER | read-only | mandatory |
| eMMEFWRev OBJECT-TYPE Denotes the revision of firmware in the module. The first octets provides the version, and the second provides the revision. | 1.3.6.1.4.1.52.1.6.2.9.3 | OCTET STRING (SIZE(1..10)) | read-only | mandatory |
| eMMEBoardMap OBJECT-TYPE Denotes a bit encoded representation of the slots that contain MIM boards. If a bit is a one then the board is present. | 1.3.6.1.4.1.52.1.6.2.9.4 | INTEGER | read-only | mandatory |
| fPRedundancy OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.6.2.10 | |||
| fPRedund OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.6.2.10.1 | |||
| fPRedundReset OBJECT-TYPE If this object is set to Reset it will cause a reset of the front panel redundancy. Setting this object to NoReset will do nothing. This object will always be read as NoReset. | 1.3.6.1.4.1.52.1.6.2.10.1.1 | INTEGER {noReset(1), reset(2)} | read-write | mandatory |
| fPRedundPollInterval OBJECT-TYPE Get/Set the number of seconds between polls for front panel redundancy. | 1.3.6.1.4.1.52.1.6.2.10.1.2 | INTEGER | read-write | mandatory |
| fPRedundRetrys OBJECT-TYPE Get/Set the the number of unanswered polls allowed for the front panel redundancy before it switches ports. | 1.3.6.1.4.1.52.1.6.2.10.1.3 | INTEGER | read-write | mandatory |
| fPRedundNumAddr OBJECT-TYPE Get the number of IP Addresses associated with front panel redundancy. | 1.3.6.1.4.1.52.1.6.2.10.1.4 | INTEGER | read-only | mandatory |
| fPRedundAddAddr OBJECT-TYPE Add an IP Address to the polling list for the front panel redundancy. | 1.3.6.1.4.1.52.1.6.2.10.1.5 | IpAddress | read-write | mandatory |
| fPRedundDelAddr OBJECT-TYPE Delete an IP Address from the polling list for the front panel redundancy. | 1.3.6.1.4.1.52.1.6.2.10.1.6 | IpAddress | read-write | mandatory |
| fPRedundActivePort OBJECT-TYPE Get/Set the front panel port you want to be active when front panel redundancy is enabled. | 1.3.6.1.4.1.52.1.6.2.10.1.7 | INTEGER | read-write | mandatory |
| fPRedundEnable OBJECT-TYPE If this object is set to enable, the front panel redundancy will be activated. If this object is set to disable, the front panel redundancy will be deactivated. When read, this object will returns the state of the object based on the last request made. | 1.3.6.1.4.1.52.1.6.2.10.1.8 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| fPRedundAddrTable OBJECT-TYPE A list of entries that provide IP address information for front panel redundancy. | 1.3.6.1.4.1.52.1.6.2.10.2 | not-accessible | mandatory | |
| fPRedundAddrEntry OBJECT-TYPE An entry in the fPRedundAddrTable providing objects for front panel redundancy. | 1.3.6.1.4.1.52.1.6.2.10.2.1 | not-accessible | mandatory | |
| fPRedundAddrId OBJECT-TYPE A unique value identifying an element in a sequence of member IP Addresses which belong to the front panel redundancy. This value goes from 1 to the maximum number of IP Addresses which may be included in front panel redundancy. | 1.3.6.1.4.1.52.1.6.2.10.2.1.1 | INTEGER | read-only | mandatory |
| fPRedundAddrIPAddr OBJECT-TYPE Returns an IP Address associated with the front panel redundancy. | 1.3.6.1.4.1.52.1.6.2.10.2.1.2 | IpAddress | read-only | mandatory |
| upsVersion OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.6.3.1 | |||
| upsRevision OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.6.3.1.1 | |||
| upsID OBJECT-TYPE Denotes a type code which refers to the manufactur- ers and model of the UPS. | 1.3.6.1.4.1.52.1.6.3.1.1.1 | INTEGER {other(1), aPCModel370(257), aPCModel400(258), aPCModel600(259), aPCModel900(260), aPCModel1250(261), aPCModel2000(262)} | read-write | mandatory |
| upsUpTime OBJECT-TYPE Denotes the operating time, in hours, since the UPS was last powered on. | 1.3.6.1.4.1.52.1.6.3.1.1.2 | INTEGER | read-only | mandatory |
| upsDisable OBJECT-TYPE Allows the UPS to be disabled. A set turns of the UPS for those systems, so equipped. A get/get-next always returns 0. | 1.3.6.1.4.1.52.1.6.3.1.1.3 | INTEGER | read-write | deprecated |
| upsDisconnect OBJECT-TYPE Allows the UPS backup power system to conserve its battery. Setting the object to a value of 1 turns off the power system. A get/get-next always retuns a 0. | 1.3.6.1.4.1.52.1.6.3.1.1.4 | INTEGER | read-write | mandatory |
| upsTest OBJECT-TYPE Denotes the status performed on the UPS. A write unitOK(1) intiates the test. A read indicates status of test. | 1.3.6.1.4.1.52.1.6.3.1.1.5 | INTEGER {unitOK(1), unitFailed(2), badBattery(3), noRecentTest(4), underTest(5)} | read-write | mandatory |
| upsBatteryCapacity OBJECT-TYPE Denotes the percentage of battery capacity left, 100% being a fully-charged battery. | 1.3.6.1.4.1.52.1.6.3.1.1.6 | INTEGER | read-only | mandatory |
| upsACLineVoltsIn OBJECT-TYPE Denotes the input AC utility line voltage. | 1.3.6.1.4.1.52.1.6.3.1.1.7 | INTEGER | read-only | mandatory |
| upsBatteryVoltsOut OBJECT-TYPE Denotes the battery voltage. | 1.3.6.1.4.1.52.1.6.3.1.1.8 | INTEGER | read-only | mandatory |
| dlForceOnBoot OBJECT-TYPE When set to a 1, the system will request a download, during the next system restart. If no server is found and the current image in flash memory is valid, the system will boot using the flash-resident image. | 1.3.6.1.4.1.52.1.6.4.1 | INTEGER | read-write | mandatory |
| dlCommitRAMToFlash OBJECT-TYPE When written with a 1, the boot software will erase flash memory, compress the downloaded code, and save the compressed image into flash memory. Upon com- pletion of this operation, the flash memory driver resets this object to 0, indicating completion of the programming operation. | 1.3.6.1.4.1.52.1.6.4.2 | INTEGER | read-write | mandatory |
| dlInitiateColdBoot OBJECT-TYPE When written with a 1, the boot software intiates a system reboot. All MIB variables used to control the exact nature of the download should be set, prior to activating a system reset. A read always returns a 0. | 1.3.6.1.4.1.52.1.6.4.3 | INTEGER | read-write | mandatory |
| dlTFTPRequestHost OBJECT-TYPE The IP address of the server to be used, when firmware is to be loaded across the network. | 1.3.6.1.4.1.52.1.6.4.4 | IpAddress | read-write | mandatory |
| dlTFTPRequest OBJECT-TYPE The filename requested of the server, when firmware is to be loaded across the network. | 1.3.6.1.4.1.52.1.6.4.5 | DisplayString | read-write | mandatory |
| dlLastImageFilename OBJECT-TYPE Filename of the last image to be successfully loaded into memory. | 1.3.6.1.4.1.52.1.6.4.6 | DisplayString | read-only | mandatory |
| dlLastServerIPAddress OBJECT-TYPE The IP address of the server used to load the present image in flash memory. | 1.3.6.1.4.1.52.1.6.4.7 | IpAddress | read-only | mandatory |
| dlFlashSize OBJECT-TYPE Denotes the size, in bytes, of flash memory con- tained on this module. | 1.3.6.1.4.1.52.1.6.4.8 | INTEGER | read-only | mandatory |
| dlFlashCount OBJECT-TYPE Denotes the number of times that flash memory has been reprogrammed. This value is initialzed to 1, when the module is initially powered up. | 1.3.6.1.4.1.52.1.6.4.9 | INTEGER | read-only | mandatory |
| dlFirmwareBase OBJECT-TYPE Denotes the starting address of the firmware in RAM. | 1.3.6.1.4.1.52.1.6.4.10 | INTEGER | read-only | mandatory |
| dlFirmwareTop OBJECT-TYPE Denotes the ending address of firmware in RAM. | 1.3.6.1.4.1.52.1.6.4.11 | INTEGER | read-only | mandatory |
| dlFirmwareStart OBJECT-TYPE Denotes the start address of the firmware, in RAM, as established by the boot process. | 1.3.6.1.4.1.52.1.6.4.12 | INTEGER | read-only | mandatory |
| dlBootRev OBJECT-TYPE Denotes the revision of boot firmware in the module. The first octets provides the version, and the second provides the revision. | 1.3.6.1.4.1.52.1.6.4.13 | OCTET STRING (SIZE(0..10)) | read-only | mandatory |
| dlForceBootp OBJECT-TYPE When set, this variable forces the client to send a BOOTP request packet when rebooting. The client will make several attempts before timing out if a server does not respond. This variable stays set. When set to a 1 it should always be read as a one. When set to zero it should always be read as zero. | 1.3.6.1.4.1.52.1.6.4.14 | INTEGER | read-write | mandatory |
| dlServerName OBJECT-TYPE This OID is reserved for future use of the Bootp server name. This field can be used when a client wants to get boot information from a particular bootp server. | 1.3.6.1.4.1.52.1.6.4.15 | OCTET STRING | read-write | mandatory |
| dlOnLineDownLoad OBJECT-TYPE During normal operation this object has the value of 1. By setting this object to a value of forceDownLoad(2) an online download will be performed. By setting this object to a value of forceDownLoadReset(3) an online down load will be performed and a reset will be forced upon successful completion of the download. | 1.3.6.1.4.1.52.1.6.4.16 | INTEGER {normalOperation(1), forceDownLoad(2), forceDownLoadReset(3)} | read-write | mandatory |
| dlOperStatus OBJECT-TYPE This object reflects the status of the download code. A value of normalOperation(3) reflects either a down load was started but has finished normally and no reset was specified or no down load has been started. A value of downLoadActive only appears while a down load is in progress. A value of downLoadCompleteError reflects that a down load was started however an error was detected. | 1.3.6.1.4.1.52.1.6.4.17 | INTEGER {other(1), unknown(2), normalOperation(3), downLoadActive(4), downLoadCompleteError(5)} | read-only | mandatory |
| dlNetAddress OBJECT-TYPE IP Address of the server to be used when an image is to be downloaded using the Runtime TFTP Download. | 1.3.6.1.4.1.52.1.6.4.18 | IpAddress | read-write | mandatory |
| dlFileName OBJECT-TYPE Filename requested of the server when an image is to be downloaded using the Runtime TFTP Download. This should be a complete path filename. | 1.3.6.1.4.1.52.1.6.4.19 | OCTET STRING (SIZE(0..128)) | read-write | mandatory |
| dlErrorString OBJECT-TYPE If the value of ctDLOperStatus is downloadCompleteError(5) then this object will provide a more complete description of the error. Otherwise this object will be the zero length string. | 1.3.6.1.4.1.52.1.6.4.20 | DisplayString | read-only | mandatory |
| dlTftpServerGatewayIPAddress OBJECT-TYPE The IP address of the gateway/router which connects this SNMP agent to the TFTP server. | 1.3.6.1.4.1.52.1.6.4.21 | IpAddress | read-write | mandatory |