CTRON-BDG-MIB
- Registered at
- 1.3.6.1.4.1.52.1.3.11.3.6.1.4.1.52.2.11.3.6.1.4.1.52.2.2
- Namespace
- enterasys
- Source file
CTRON-BDG-MIB- Digest
sha256:cc6a88802b6510fbf7408a35041b328e0291966f2d42e7aa36e290ae800095ff
Imports
| From | Symbols |
|---|---|
| IRM-OIDS | bridge, layerMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CTRON-BDG-MIB CTRON-OIDS IRM-OIDS SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| bridgeRev1 OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.3.1 | |||
| bdgdevice OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.3.1.1 | |||
| bdgdeviceDisableBdg OBJECT-TYPE Indicates if the bridge will be disabled. | 1.3.6.1.4.1.52.1.3.1.1.1 | INTEGER {disableBridge(0), enableBridge(1)} | read-write | mandatory |
| bdgdeviceRestoreSettings OBJECT-TYPE Restore the following settings to their default values: Bridge Name to ETHERNET_BRIDGE, Location to LOCAL, Port 1 Name to PORT_1, Port 2 Name to PORT_2, Port 1 Network Name to LAN_1, Port 2 Network Name to LAN_2, Ageing Time for Acquired Database to 300 seconds, Erase the acquired database, Erase the permanent database, Place sixteen default multicast addresses into the permanent and acquired databases, Type of Spanning Tree to 802.1, Type of Filtering to IEEE 802.1, Bridge Max Age to 20 seconds, Bridge Forward Delay to 15 seconds, Bridge Hello Time to 2 seconds, Bridge Priority to 8000, Port 1 Priority to 80, Port 2 Priority to 80, Port 1 Path Cost to 100, Port 2 Path Cost to 100, Restart the bridge. | 1.3.6.1.4.1.52.1.3.1.1.2 | INTEGER {restoreSettings(0)} | read-write | mandatory |
| bdgdeviceBdgName OBJECT-TYPE The user-defined name (up to 32 characters long) of the bridge. The default bridge name is ETHERNET_BRIDGE. | 1.3.6.1.4.1.52.1.3.1.1.4 | OCTET STRING | read-write | mandatory |
| bdgdeviceNumPorts OBJECT-TYPE The number of ports present on the bridge. | 1.3.6.1.4.1.52.1.3.1.1.5 | INTEGER | read-only | mandatory |
| bdgdeviceType OBJECT-TYPE The type of bridge, NB25E, IRBM, or NB20E. | 1.3.6.1.4.1.52.1.3.1.1.6 | OCTET STRING | read-only | mandatory |
| bdgdeviceVersion OBJECT-TYPE The release version of the firmware installed in the bridge. | 1.3.6.1.4.1.52.1.3.1.1.7 | OCTET STRING | read-only | mandatory |
| bdgdeviceLocation OBJECT-TYPE The user-defined name to indicate the location of the bridge on the network. The default location name is LOCAL. | 1.3.6.1.4.1.52.1.3.1.1.8 | OCTET STRING | read-write | mandatory |
| bdgdeviceStatus OBJECT-TYPE The status of the bridge, ON-LINE, STAND BY or DISABLED. | 1.3.6.1.4.1.52.1.3.1.1.9 | OCTET STRING | read-only | mandatory |
| bdgdeviceRestartBdg OBJECT-TYPE Force the bridge to undergo a software reset. | 1.3.6.1.4.1.52.1.3.1.1.10 | INTEGER {restartBridge(0)} | read-write | mandatory |
| bdgdeviceFrFwd OBJECT-TYPE The number of frames forwarded by the bridge. | 1.3.6.1.4.1.52.1.3.1.1.11 | Counter | read-only | mandatory |
| bdgdeviceFrRx OBJECT-TYPE The number of frames received by the bridge. | 1.3.6.1.4.1.52.1.3.1.1.12 | Counter | read-only | mandatory |
| bdgdeviceFrFlt OBJECT-TYPE The number of frames filtered by the bridge. | 1.3.6.1.4.1.52.1.3.1.1.13 | Counter | read-only | mandatory |
| bdgdeviceErr OBJECT-TYPE The total number of network errors that have occurred. | 1.3.6.1.4.1.52.1.3.1.1.14 | Counter | read-only | mandatory |
| bdgdeviceSwitchSetting OBJECT-TYPE Indicates the current switch settings read from the bridge hardware. | 1.3.6.1.4.1.52.1.3.1.1.15 | OCTET STRING | read-only | mandatory |
| bdgdeviceNumRestarts OBJECT-TYPE The number of times the bridge has been powered up or restarted. | 1.3.6.1.4.1.52.1.3.1.1.16 | Counter | read-only | mandatory |
| bdgdeviceTypeFiltering OBJECT-TYPE The type of filtering to be performed by the bridge. The default is IEEE 802.1. | 1.3.6.1.4.1.52.1.3.1.1.17 | INTEGER {ieee8021(0), specialDB(1), both(2)} | read-write | mandatory |
| bdgdeviceSTAProtocol OBJECT-TYPE The spanning tree algorithm under which the bridge is operating. The selections are as follows: - IEEE 802.1 compliant spanning tree algorithm environment (802.1) - DEC LAN Bridge 100 environment (DEC) - Without the spanning tree algorithm enabled (NONE) The default is 802.1. | 1.3.6.1.4.1.52.1.3.1.1.18 | INTEGER {ieee8021(0), dec(1), none(2)} | read-write | mandatory |
| bdgdeviceBridgeID OBJECT-TYPE The unique identifier of the bridge. The first two bytes of the identifier are the bridge priority and the last six bytes are the Ethernet address. | 1.3.6.1.4.1.52.1.3.1.1.19 | OCTET STRING | read-only | mandatory |
| bdgdeviceTopChgCnt OBJECT-TYPE The number of times the bridge's Topology Change Flag has been changed since the bridge was powered up or initialized. | 1.3.6.1.4.1.52.1.3.1.1.20 | Counter | read-only | mandatory |
| bdgdeviceRootCost OBJECT-TYPE The cost of the path to the root from this bridge. | 1.3.6.1.4.1.52.1.3.1.1.21 | INTEGER | read-only | mandatory |
| bdgdeviceRootPort OBJECT-TYPE The port identifier for the port which offers the lowest cost path to the root, i.e. that port for which the sum of the values of the designated cost and path cost parameters held for the port is lowest. | 1.3.6.1.4.1.52.1.3.1.1.22 | INTEGER | read-only | mandatory |
| bdgdeviceHelloTime OBJECT-TYPE The time interval between the transmission of Configuration BPDU's by a bridge which is attempting to become the root or is the root. | 1.3.6.1.4.1.52.1.3.1.1.23 | INTEGER | read-only | mandatory |
| bdgdeviceBdgMaxAge OBJECT-TYPE The value of the Max Age parameter when the bridge is the root or is attempting to become the root. A time of 6 to 40 seconds is allowed. The default is 20 seconds. | 1.3.6.1.4.1.52.1.3.1.1.24 | INTEGER | read-write | mandatory |
| bdgdeviceBdgFwdDly OBJECT-TYPE The value of the forward delay parameter when the bridge is the root or is attempting to become the root. A time of 4 to 30 seconds is allowed. | 1.3.6.1.4.1.52.1.3.1.1.25 | INTEGER | read-write | mandatory |
| bdgdeviceTimeTopChg OBJECT-TYPE The time in seconds that has elapsed since the bridge's Topology Change Flag last recorded the value of a topology change. | 1.3.6.1.4.1.52.1.3.1.1.26 | INTEGER | read-only | mandatory |
| bdgdeviceTopChg OBJECT-TYPE Indicates if a bridge topology change is in progress. | 1.3.6.1.4.1.52.1.3.1.1.27 | INTEGER {noTopologyChangeInProgress(0), topologyChangeInProgress(1)} | read-only | mandatory |
| bdgdeviceDesigRoot OBJECT-TYPE The unique identifier of the bridge recorded as the root. | 1.3.6.1.4.1.52.1.3.1.1.28 | OCTET STRING | read-only | mandatory |
| bdgdeviceMaxAge OBJECT-TYPE The maximum age of received protocol information before it is discarded. | 1.3.6.1.4.1.52.1.3.1.1.29 | INTEGER | read-only | mandatory |
| bdgdeviceHoldTime OBJECT-TYPE The minimum time period elapsing between the transmission of configuration BPDU's through a given bridge port. | 1.3.6.1.4.1.52.1.3.1.1.30 | INTEGER | read-only | mandatory |
| bdgdeviceFwdDly OBJECT-TYPE The time spent in the listening state while moving from the blocking state to the learning state, or the time spent in the learning state while moving from the listening state to the forwarding state. | 1.3.6.1.4.1.52.1.3.1.1.31 | INTEGER | read-only | mandatory |
| bdgdeviceBdgHello OBJECT-TYPE The value of the Hello Time parameter when the bridge is the root or is attempting to become the root. A time of 1 to 10 seconds is allowed. The default is 2 seconds. | 1.3.6.1.4.1.52.1.3.1.1.32 | INTEGER | read-write | mandatory |
| bdgdeviceBdgPriority OBJECT-TYPE The part of the bridge address that contains the identifier used in the spanning tree for priority comparisons. Allowed range is 0 through FFFF. The default is 8000. | 1.3.6.1.4.1.52.1.3.1.1.33 | INTEGER | read-write | mandatory |
| bdgdeviceResetCounts OBJECT-TYPE Reset all counters to zero. | 1.3.6.1.4.1.52.1.3.1.1.34 | INTEGER {resetCounts(0)} | read-write | mandatory |
| bdgdeviceUptime OBJECT-TYPE The time, in seconds, that has elapsed since the bridge was last reset or initialized. | 1.3.6.1.4.1.52.1.3.1.1.35 | INTEGER | read-only | mandatory |
| bdgdeviceTrapType OBJECT-TYPE Contains the object identifier of the first VarBinding in the last trap generated by the bridge. | 1.3.6.1.4.1.52.1.3.1.1.36 | OBJECT IDENTIFIER | read-only | mandatory |
| bdgPort OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.3.1.2 | |||
| bdgPortAddress OBJECT-TYPE The Ethernet address of the port. | 1.3.6.1.4.1.52.1.3.1.2.1 | OCTET STRING | read-only | mandatory |
| bdgPortName OBJECT-TYPE The user-defined name assigned to the port. The default port 1 name is PORT_1 and the default Port 2 name is PORT_2. | 1.3.6.1.4.1.52.1.3.1.2.2 | OCTET STRING | read-write | mandatory |
| bdgPortType OBJECT-TYPE The IEEE specification the port meets, e.g. 802.3. | 1.3.6.1.4.1.52.1.3.1.2.3 | OCTET STRING | read-only | mandatory |
| bdgPortStatus OBJECT-TYPE The status in which the port is operating. The status messages for Ports 1 and 2 are: OFF - The port is off, due to a failed network interface chip associated with that port. OK/SQE ON - The port is communicating with the network and the transceiver making the connection to the network has SQE enabled. OK/SQE OFF - The port is communicating with the network and the transceiver making the connection to the network has SQE disabled. CARRIER LOST - Communication with the network has not been established or has been lost. | 1.3.6.1.4.1.52.1.3.1.2.4 | OCTET STRING | read-only | mandatory |
| bdgPortNetName OBJECT-TYPE The user-defined name assigned to a network segment connected to the port. The default network name for Port 1 is LAN_1 and the default network name for Port 2 is LAN_2. | 1.3.6.1.4.1.52.1.3.1.2.5 | OCTET STRING | read-write | mandatory |
| bdgPortFrRx OBJECT-TYPE The number of frames received at the specified port. | 1.3.6.1.4.1.52.1.3.1.2.6 | Counter | read-only | mandatory |
| bdgPortDisInb OBJECT-TYPE The total number of valid frames that were received at the port but then discarded by the bridge in the forwarding process. | 1.3.6.1.4.1.52.1.3.1.2.7 | Counter | read-only | mandatory |
| bdgPortFwdOutb OBJECT-TYPE The number of frames forwarded successfully to the appropriate port. | 1.3.6.1.4.1.52.1.3.1.2.8 | Counter | read-only | mandatory |
| bdgPortDisLOB OBJECT-TYPE The number of packets that were discarded by the bridge because of a lack of buffer space to maintain the data. | 1.3.6.1.4.1.52.1.3.1.2.9 | Counter | read-only | mandatory |
| bdgPortDisTDE OBJECT-TYPE The number of frames that were intended for forwarding but were discarded when the maximum time period set for transmission was exceeded before forwarding was possible. | 1.3.6.1.4.1.52.1.3.1.2.10 | Counter | read-only | mandatory |
| bdgPortDisErr OBJECT-TYPE The number of frames that could not be transmitted because the frame was too large for the attached network (1526 bytes, including preamble, for 802.3 networks). | 1.3.6.1.4.1.52.1.3.1.2.11 | Counter | read-only | mandatory |
| bdgPortColl OBJECT-TYPE The number of collisions that have occurred on the network at the specified port. | 1.3.6.1.4.1.52.1.3.1.2.12 | Counter | read-only | mandatory |
| bdgPortTxAbrt OBJECT-TYPE The number of transmissions that have been aborted due to excessive collisions (over 16 attempts to transmit the same packet). | 1.3.6.1.4.1.52.1.3.1.2.13 | Counter | read-only | mandatory |
| bdgPortOowColl OBJECT-TYPE The number of collisions out of the standard collision window (51.2 uS). This indicates a network problem. | 1.3.6.1.4.1.52.1.3.1.2.14 | Counter | read-only | mandatory |
| bdgPortCRCErr OBJECT-TYPE The number of packets detected with Cyclical Redundancy Check failures. | 1.3.6.1.4.1.52.1.3.1.2.15 | Counter | read-only | mandatory |
| bdgPortFrAlErr OBJECT-TYPE The number of errors due to misaligned packets. | 1.3.6.1.4.1.52.1.3.1.2.16 | Counter | read-only | mandatory |
| bdgPortPriority OBJECT-TYPE The part of the port identifier which is used with the spanning tree algorithm when determining which port in a LAN segment has priority. The default is 80. | 1.3.6.1.4.1.52.1.3.1.2.17 | INTEGER | read-write | mandatory |
| bdgPortState OBJECT-TYPE The current state of the port, DISABLED, LISTENING, LEARNING, FORWARDING or BLOCKING. | 1.3.6.1.4.1.52.1.3.1.2.18 | OCTET STRING | read-only | mandatory |
| bdgPortPathCost OBJECT-TYPE The contributory cost of the applicable port to the overall cost of the path when the specified port is the root port. Allowable range is 1 to 65535. The default is 100. | 1.3.6.1.4.1.52.1.3.1.2.19 | INTEGER | read-write | mandatory |
| bdgPortDesigCost OBJECT-TYPE The cost of the path of this port to the root bridge on the network. | 1.3.6.1.4.1.52.1.3.1.2.20 | INTEGER | read-only | mandatory |
| bdgPortDesigBrdg OBJECT-TYPE The network address of the bridge that is assumed to be the root bridge on the network. | 1.3.6.1.4.1.52.1.3.1.2.21 | OCTET STRING | read-only | mandatory |
| bdgPortDesigPort OBJECT-TYPE The port identifier of the bridge port believed to be the designated port for the LAN associated with the port. | 1.3.6.1.4.1.52.1.3.1.2.22 | INTEGER | read-only | mandatory |
| bdgPortTopChgAck OBJECT-TYPE The value of the topology change acknowledgement flag in the next configuration BPDU to be transmitted on the associated port. | 1.3.6.1.4.1.52.1.3.1.2.23 | INTEGER {noTopologyChangeIsOccurring(0), topologyChangeIsOccurring(1)} | read-only | mandatory |
| bdgPortDesigRoot OBJECT-TYPE The unique bridge identifier of the bridge that is assumed to be the root bridge on the network. | 1.3.6.1.4.1.52.1.3.1.2.24 | OCTET STRING | read-only | mandatory |
| bdgPortRuntPackets OBJECT-TYPE The number of packets received at the indicated bdgPort that were less than the IEEE 802.3 minimum Ethernet frame size of 64 bytes. | 1.3.6.1.4.1.52.1.3.1.2.25 | Counter | read-only | mandatory |
| bdgPortOversizePackets OBJECT-TYPE The number of packets received at the indicated port that were greater than the IEEE 802.3 maximum Ethernet frame size of 1518 bytes. | 1.3.6.1.4.1.52.1.3.1.2.26 | Counter | read-only | mandatory |
| bdgPortFrFilt OBJECT-TYPE The number of frames received at the indicated port that were filtered by the bridge. | 1.3.6.1.4.1.52.1.3.1.2.27 | Counter | read-only | mandatory |
| filterDB OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.3.1.3 | |||
| acqDB OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.3.1.3.1 | |||
| acqStats OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.3.1.3.1.1 | |||
| acqTotalEntries OBJECT-TYPE The total number of entries in the acquired database. | 1.3.6.1.4.1.52.1.3.1.3.1.1.1 | INTEGER | read-only | mandatory |
| acqMaxEntries OBJECT-TYPE The maximum number of entries allowed in the acquired database. | 1.3.6.1.4.1.52.1.3.1.3.1.1.2 | INTEGER | read-only | mandatory |
| acqStaticEntries OBJECT-TYPE The number of addresses added to the Acquired database by the user or network manager. | 1.3.6.1.4.1.52.1.3.1.3.1.1.3 | INTEGER | read-only | mandatory |
| acqStaticAgeTime OBJECT-TYPE The length of time allowed for a static entry in the Acquired database to be inactive before it is dropped from the database. This time is fixed at zero. | 1.3.6.1.4.1.52.1.3.1.3.1.1.4 | INTEGER | read-only | mandatory |
| acqDynEntries OBJECT-TYPE The number of entries that have been accumulated in the Acquired database through the bridge's learning process. | 1.3.6.1.4.1.52.1.3.1.3.1.1.5 | INTEGER | read-only | mandatory |
| acqDynAgeTime OBJECT-TYPE The length of time allowed for a dynamic entry in the acquired database to be inactive before it is dropped from the database. A time from 10 - 1,000,000 seconds is allowed. The default is 300 seconds. | 1.3.6.1.4.1.52.1.3.1.3.1.1.6 | INTEGER | read-write | mandatory |
| acqEraseDatabase OBJECT-TYPE Set to zero to erase all entries in the acquired database. | 1.3.6.1.4.1.52.1.3.1.3.1.1.7 | INTEGER {eraseAcquiredDatabase(0)} | read-write | mandatory |
| acqOptions OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.3.1.3.1.2 | |||
| acqCreate00 OBJECT-TYPE Add an entry to the acquired database to filter packets entering ports 1 and 2 if those packets are destined for the specified address. | 1.3.6.1.4.1.52.1.3.1.3.1.2.1 | INTEGER {createAcquiredEntryFilterPort1FilterPort2(0)} | read-write | mandatory |
| acqCreate20 OBJECT-TYPE Add an entry to the acquired database to forward packets entering port1 to port2 and filter packets entering port2 if those packets are destined for the specified address. | 1.3.6.1.4.1.52.1.3.1.3.1.2.2 | INTEGER {createAcquiredEntryForwardPort1FilterPort2(0)} | read-write | mandatory |
| acqCreate01 OBJECT-TYPE Add an entry to the acquired database to filter packets entering port 1 and forward packets entering port 2 to port 1 if those packets are destined for the specified address. | 1.3.6.1.4.1.52.1.3.1.3.1.2.3 | INTEGER {createAcquiredEntryFilterPort1ForwardPort2(0)} | read-write | mandatory |
| acqCreate21 OBJECT-TYPE Add an entry to the acquired database to forward packets entering port 1 to port 2 and to forward packets entering port 2 to port 1 if those packets are destined for the specified address. | 1.3.6.1.4.1.52.1.3.1.3.1.2.4 | INTEGER {createAcquiredEntryForwardPort1ForwardPort2(0)} | read-write | mandatory |
| acqDelete OBJECT-TYPE Delete an entry from the acquired database. | 1.3.6.1.4.1.52.1.3.1.3.1.2.5 | INTEGER {deleteAcquiredEntry(0)} | read-write | mandatory |
| acqDispType OBJECT-TYPE Display the entry type, STATIC or DYNAMIC. | 1.3.6.1.4.1.52.1.3.1.3.1.2.6 | OCTET STRING | read-only | mandatory |
| acqDispOutp1 OBJECT-TYPE The outbound port for packets entering port 1. | 1.3.6.1.4.1.52.1.3.1.3.1.2.7 | INTEGER {filter(0), relay(2)} | read-only | mandatory |
| acqDispOutp2 OBJECT-TYPE The outbound port for packets entering port 2. | 1.3.6.1.4.1.52.1.3.1.3.1.2.8 | INTEGER {filter(0), relay(1)} | read-only | mandatory |
| acqSrcAddress OBJECT-TYPE The source address of this acquired database entry, i.e. the instance. | 1.3.6.1.4.1.52.1.3.1.3.1.2.9 | OCTET STRING | read-only | mandatory |
| permDB OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.3.1.3.2 | |||
| permStats OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.3.1.3.2.1 | |||
| permMaxEntries OBJECT-TYPE The maximum number of entries allowed in the permanent database. | 1.3.6.1.4.1.52.1.3.1.3.2.1.1 | INTEGER | read-only | mandatory |
| permCurrEntries OBJECT-TYPE The number of entries currently recorded in the bridge's permanent database. | 1.3.6.1.4.1.52.1.3.1.3.2.1.2 | INTEGER | read-only | mandatory |
| permEraseDatabase OBJECT-TYPE Erase all entries in the permanent database. | 1.3.6.1.4.1.52.1.3.1.3.2.1.3 | INTEGER {erasePermanentDatabase(0)} | read-write | mandatory |
| permOptions OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.3.1.3.2.2 | |||
| permCreate00 OBJECT-TYPE Add an entry to the permanent database to filter packets entering ports 1 and 2 if those packets are destined for the specified address. | 1.3.6.1.4.1.52.1.3.1.3.2.2.1 | INTEGER {createPermanentEntryFilterPort1FilterPort2(0)} | read-write | mandatory |
| permCreate20 OBJECT-TYPE Add an entry to the permanent database to forward packets entering port 1 and filter packets entering port 2 if those packets are destined for the specified address. | 1.3.6.1.4.1.52.1.3.1.3.2.2.2 | INTEGER {createPermanentEntryForwardPort1FilterPort2(0)} | read-write | mandatory |
| permCreate01 OBJECT-TYPE Add an entry to the permanent database to filter packets entering port 1 and forward packets entering port 2 if those packets are destined for the specified address. | 1.3.6.1.4.1.52.1.3.1.3.2.2.3 | INTEGER {createPermanentEntryFilterPort1ForwardPort2(0)} | read-write | mandatory |
| permCreate21 OBJECT-TYPE Add an entry to the permanent database to forward packets entering ports 1 and 2 if those packets are destined for the specified address. | 1.3.6.1.4.1.52.1.3.1.3.2.2.4 | INTEGER {createPermanentEntryForwardPort1ForwardPort2(0)} | read-write | mandatory |
| permDelete OBJECT-TYPE Delete an entry from the permanent database. | 1.3.6.1.4.1.52.1.3.1.3.2.2.5 | INTEGER {deletePermanentEntry(0)} | read-write | mandatory |
| permDispType OBJECT-TYPE Display the entry type, STATIC or DYNAMIC. | 1.3.6.1.4.1.52.1.3.1.3.2.2.6 | OCTET STRING | read-only | mandatory |
| permDispOutp1 OBJECT-TYPE The outbound port for packets entering port 1. | 1.3.6.1.4.1.52.1.3.1.3.2.2.7 | INTEGER {filter(0), relay(2)} | read-only | mandatory |
| permDispOutp2 OBJECT-TYPE The outbound port for packets entering port 2. | 1.3.6.1.4.1.52.1.3.1.3.2.2.8 | INTEGER {filter(0), relay(1)} | read-only | mandatory |
| permSrcAddress OBJECT-TYPE The source address in this permanent database entry, i.e. the instance. | 1.3.6.1.4.1.52.1.3.1.3.2.2.9 | OCTET STRING | read-only | mandatory |
| specialDB OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.3.1.3.3 | |||
| specStats OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.3.1.3.3.1 | |||
| specNumEntries OBJECT-TYPE The number of filters in the special database. | 1.3.6.1.4.1.52.1.3.1.3.3.1.1 | INTEGER | read-only | mandatory |
| specMaxEntries OBJECT-TYPE The maximum number of filters the special database can contain. | 1.3.6.1.4.1.52.1.3.1.3.3.1.2 | INTEGER | read-only | mandatory |
| specNextFilterNum OBJECT-TYPE The number of the next available filter that can be added to the special database. | 1.3.6.1.4.1.52.1.3.1.3.3.1.3 | INTEGER | read-only | mandatory |
| specFilters OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.3.1.3.3.2 | |||
| specEnable OBJECT-TYPE Enable or disable the filter. | 1.3.6.1.4.1.52.1.3.1.3.3.2.1 | INTEGER {disableFilter(0), enableFilter(1)} | read-write | mandatory |
| specPort1 OBJECT-TYPE Set port 1 to filter or forward packets. | 1.3.6.1.4.1.52.1.3.1.3.3.2.2 | INTEGER {filter(0), relay(2)} | read-write | mandatory |
| specPort2 OBJECT-TYPE Set port 2 to filter or forward packets. | 1.3.6.1.4.1.52.1.3.1.3.3.2.3 | INTEGER {filter(0), relay(1)} | read-write | mandatory |
| specDestAddress OBJECT-TYPE Set the special database to filter packets with a specific destination address. | 1.3.6.1.4.1.52.1.3.1.3.3.2.4 | OCTET STRING | read-write | mandatory |
| specSrcAddress OBJECT-TYPE Set the special database to filter packets with a specific source address. | 1.3.6.1.4.1.52.1.3.1.3.3.2.5 | OCTET STRING | read-write | mandatory |
| specType OBJECT-TYPE Set the special database to filter packets with a specific type field. | 1.3.6.1.4.1.52.1.3.1.3.3.2.6 | OCTET STRING | read-write | mandatory |
| specDataField OBJECT-TYPE Set the special database to filter packets based on the first sixteen bytes of data in the packet. | 1.3.6.1.4.1.52.1.3.1.3.3.2.7 | OCTET STRING | read-write | mandatory |
| specDeleteFilter OBJECT-TYPE Delete a filter from the special database. | 1.3.6.1.4.1.52.1.3.1.3.3.2.8 | INTEGER {deleteFilter(0)} | read-write | mandatory |
| trapTypes OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.3.1.4 | |||
| bdgTables OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.3.1.5 | |||
| lmcommon OBJECT-IDENTITY | 1.3.6.1.4.1.52.2.1 | |||
| mAC OBJECT-IDENTITY | 1.3.6.1.4.1.52.2.2 | |||
| ieee8023 OBJECT-IDENTITY | 1.3.6.1.4.1.52.2.2.1 | |||
| pcIF OBJECT-IDENTITY | 1.3.6.1.4.1.52.2.2.1.1 | |||
| pcIfRev OBJECT-IDENTITY | 1.3.6.1.4.1.52.2.2.1.1.1 | |||
| pcDeviceName OBJECT-TYPE Name of the PC device | 1.3.6.1.4.1.52.2.2.1.1.1.1 | OCTET STRING | read-only | mandatory |
| pcBoardType OBJECT-TYPE An object Identifier that indicates the type of the PC board. This will include MAC type and Media type. | 1.3.6.1.4.1.52.2.2.1.1.1.2 | OBJECT IDENTIFIER | read-only | mandatory |
| pcOwnerName OBJECT-TYPE The owner of this PC. | 1.3.6.1.4.1.52.2.2.1.1.1.3 | OCTET STRING | read-only | mandatory |
| pcLocation OBJECT-TYPE A text description of the location of this PC. | 1.3.6.1.4.1.52.2.2.1.1.1.4 | OCTET STRING | read-only | mandatory |
| pcMMACAddr OBJECT-TYPE The MAC address of the MMAC that this PC is connected to. | 1.3.6.1.4.1.52.2.2.1.1.1.5 | OCTET STRING | read-only | mandatory |
| pcMMACBoard OBJECT-TYPE The slot number of the board in the MMAC that this PC is connected to. | 1.3.6.1.4.1.52.2.2.1.1.1.6 | OCTET STRING | read-only | mandatory |
| pcMMACPort OBJECT-TYPE The number of the port on the board of the MMAC that this PC is connected to. | 1.3.6.1.4.1.52.2.2.1.1.1.7 | OCTET STRING | read-only | mandatory |
| pcApplication OBJECT-TYPE A text description of the network application running on this PC. | 1.3.6.1.4.1.52.2.2.1.1.1.8 | OCTET STRING | read-only | mandatory |
| pcDriverRev OBJECT-TYPE The revision of the LAN card driver. | 1.3.6.1.4.1.52.2.2.1.1.1.9 | OCTET STRING | read-only | mandatory |
| pcOnboardMemory OBJECT-TYPE The number of Kilobytes of memory (eg. a 16K board would reply 16) | 1.3.6.1.4.1.52.2.2.1.1.1.10 | INTEGER | read-only | mandatory |
| pcComment OBJECT-TYPE A user-defined character string. | 1.3.6.1.4.1.52.2.2.1.1.1.11 | OCTET STRING | read-only | mandatory |
| pcMACAddr OBJECT-TYPE The MAC address of the PC card. | 1.3.6.1.4.1.52.2.2.1.1.1.12 | OCTET STRING | read-only | mandatory |
| pcFramesXmit OBJECT-TYPE The number of MAC frames transmitted by this PC card. | 1.3.6.1.4.1.52.2.2.1.1.1.13 | INTEGER | read-only | mandatory |
| pcBytesXmit OBJECT-TYPE The number bytes transmitted by this PC card. | 1.3.6.1.4.1.52.2.2.1.1.1.14 | INTEGER | read-only | mandatory |
| pcMcastXmit OBJECT-TYPE The number of multicasted frames sent by this PC card. | 1.3.6.1.4.1.52.2.2.1.1.1.15 | INTEGER | read-only | mandatory |
| pcBcastXmit OBJECT-TYPE The number of broadcast frames from this PC card. | 1.3.6.1.4.1.52.2.2.1.1.1.16 | INTEGER | read-only | mandatory |
| pcDeferXmit OBJECT-TYPE The number of transmit packets that were deferred due to busy media. | 1.3.6.1.4.1.52.2.2.1.1.1.17 | INTEGER | read-only | mandatory |
| pcSglColl OBJECT-TYPE The number of transmit packet experiencing a single collision. | 1.3.6.1.4.1.52.2.2.1.1.1.18 | INTEGER | read-only | mandatory |
| pcMultiColl OBJECT-TYPE The number of transmit packets that have experienced multiple collisions. | 1.3.6.1.4.1.52.2.2.1.1.1.19 | INTEGER | read-only | mandatory |
| pcTotXmitErrs OBJECT-TYPE The total number of transmit errors. | 1.3.6.1.4.1.52.2.2.1.1.1.20 | INTEGER | read-only | mandatory |
| pcLateColls OBJECT-TYPE The number of transmit packets that experienced late collisions. | 1.3.6.1.4.1.52.2.2.1.1.1.21 | INTEGER | read-only | mandatory |
| pcXcessColls OBJECT-TYPE The number of transmit packets aborted due to excess collisions. | 1.3.6.1.4.1.52.2.2.1.1.1.22 | INTEGER | read-only | mandatory |
| pcCarrErr OBJECT-TYPE The number of transmit packets that experience carrier sense errors (ie. lose carrier during transmission). | 1.3.6.1.4.1.52.2.2.1.1.1.23 | INTEGER | read-only | mandatory |
| pcFramesRec OBJECT-TYPE The number of frames received. | 1.3.6.1.4.1.52.2.2.1.1.1.24 | INTEGER | read-only | mandatory |
| pcBytesRec OBJECT-TYPE The number of bytes received by this station. | 1.3.6.1.4.1.52.2.2.1.1.1.25 | INTEGER | read-only | mandatory |
| pcMcastRec OBJECT-TYPE The number of multicasted frames received. | 1.3.6.1.4.1.52.2.2.1.1.1.26 | INTEGER | read-only | mandatory |
| pcBcastRec OBJECT-TYPE The number of broadcast packets received. | 1.3.6.1.4.1.52.2.2.1.1.1.27 | INTEGER | read-only | mandatory |
| pcTotRecErrs OBJECT-TYPE The total number of receive errors. | 1.3.6.1.4.1.52.2.2.1.1.1.28 | INTEGER | read-only | mandatory |
| pcTooLong OBJECT-TYPE The number of packets received that are too long (over 1518 bytes). | 1.3.6.1.4.1.52.2.2.1.1.1.29 | INTEGER | read-only | mandatory |
| pcTooShort OBJECT-TYPE The number of packets that are too short. (under 64 bytes long). | 1.3.6.1.4.1.52.2.2.1.1.1.30 | INTEGER | read-only | mandatory |
| pcAlignErrs OBJECT-TYPE The number of alignment errors in receive packets. | 1.3.6.1.4.1.52.2.2.1.1.1.31 | INTEGER | read-only | mandatory |
| pcCRCErrs OBJECT-TYPE The number of receive packets with CRC errors. | 1.3.6.1.4.1.52.2.2.1.1.1.32 | INTEGER | read-only | mandatory |
| pcLenErrs OBJECT-TYPE The number of packets whose length is not equal to the number of bytes received. | 1.3.6.1.4.1.52.2.2.1.1.1.33 | INTEGER | read-only | mandatory |
| pcIntRecErr OBJECT-TYPE The number of receive packets that experienced internal errors (eg. no receive buffers). | 1.3.6.1.4.1.52.2.2.1.1.1.34 | INTEGER | read-only | mandatory |
| pcSqeErr OBJECT-TYPE The number of SQE errors. | 1.3.6.1.4.1.52.2.2.1.1.1.35 | INTEGER | read-only | mandatory |