CTRON-AppleTalk-ROUTER-MIB
- Registered at
- 1.3.6.1.4.1.52.4.2.2.2.3.41.3.6.1.4.1.52.4.2.2.2.4
- Namespace
- enterasys
- Source file
CTRON-AppleTalk-ROUTER-MIB- Digest
sha256:647f4a2acd08b60dac7f609fe3fca17800e376822d72ceddf8ecb129216daae7
Imports
| From | Symbols |
|---|---|
| ROUTER-OIDS | nwRouter, nwRtrProtoSuites |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CTRON-AppleTalk-ROUTER-MIB CTRON-MIB-NAMES CTRON-OIDS ROUTER-OIDS SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| AtDdpNodeAddress type | ||||
| AtName type | ||||
| AtNetworkNumber type |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| nwAtRouter OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4 | |||
| nwAtMibs OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.1 | |||
| nwAtMibRevText OBJECT-TYPE Indicates the current revision level of the Cabletron at Routing Services MIB in textual format. | 1.3.6.1.4.1.52.4.2.2.2.3.4.1.1 | DisplayString | read-only | mandatory |
| nwAtComponents OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2 | |||
| nwAtSystem OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.1 | |||
| nwAtSysConfig OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.1 | |||
| nwAtSysRouterId OBJECT-TYPE The AppleTalk node address used to uniquely identify the host (device) running the AppleTalk Routing Services. The value of nwAtSysRouterId is equal to the highest AppleTalk node address assigned to any router port. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.1.1 | AtNetworkNumber | read-write | mandatory |
| nwAtSysAdministration OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.2 | |||
| nwAtSysAdminSTATUS OBJECT-TYPE Sets the administrative state of AppleTalk Routing Services system wide. Enabled (3) causes AppleTalk Routing Services to become active on all router ports configured and enabled for AppleTalk Routing Services. Disabled (2) causes AppleTalk Routing Services to become inactive system-wide. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.2.1 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwAtSysOperSTATUS OBJECT-TYPE Indicates the operating condition of AppleTalk Routing Services system- wide. The value of nwAtSysOperStatus indicates any problem with your AppleTalk Routing Services configuration. A value of 6 indicates that regardless of the value of nwAtSysAdminStatus, AppleTalk Routing Services is not operating because of an invalid configuration. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.2.2 | INTEGER {other(1), disabled(2), enabled(3), pending-disable(4), pending-enable(5), invalid-config(6)} | read-only | mandatory |
| nwAtSysAdminReset OBJECT-TYPE Resets AppleTalk Routing Services system-wide. Reset (2) forces a restart of AppleTalk Routing Services without a graceful shutdown on any active router ports and without affecting any other routing services. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.2.3 | INTEGER {other(1), reset(2)} | read-write | mandatory |
| nwAtSysOperationalTime OBJECT-TYPE Indicates the elapsed time, in hundredths of a second, that nwAtSysOperStatus has been in its current state. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.2.4 | TimeTicks | read-only | mandatory |
| nwAtSysVersion OBJECT-TYPE Indicates the current revision level of the AppleTalk Routing Services firmware, in textual format. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.2.5 | DisplayString | read-only | mandatory |
| nwAtForwarding OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2 | |||
| nwAtFwdSystem OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1 | |||
| nwAtFwdCounters OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1 | |||
| nwAtFwdCtrAdminSTATUS OBJECT-TYPE Sets the administrative state of the aggregate (system-wide) AppleTalk packet and byte counters. Enabled (3) causes these counters to become active. Disabled (2) causes these counters to become inactive. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.1 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwAtFwdCtrReset OBJECT-TYPE Reset(2) resets the aggregate (system-wide) AppleTalk packet and byte counters. Reset (2) resets the AppleTalk aggregate counters to 0.nwAtFwdCtrOperationalTime is also reset to 0. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.2 | INTEGER {other(1), reset(2)} | read-write | mandatory |
| nwAtFwdCtrOperationalTime OBJECT-TYPE Indicates the elapsed time, in hundredths of a second, that nwAtFwdCtrAdminStatus has been in the current state. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.3 | TimeTicks | read-only | mandatory |
| nwAtFwdCtrInPkts OBJECT-TYPE Indicates the total number of AppleTalk packets that have been received, system-wide, during nwAtFwdCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.4 | Counter | read-only | mandatory |
| nwAtFwdCtrOutPkts OBJECT-TYPE Indicates the total number of AppleTalk packets that have been transmitted, system-wide, during nwAtFwdCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.5 | Counter | read-only | mandatory |
| nwAtFwdCtrFwdPkts OBJECT-TYPE Indicates the total number of AppleTalk packets that have been forwarded, system-wide, during nwAtFwdCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.6 | Counter | read-only | mandatory |
| nwAtFwdCtrFilteredPkts OBJECT-TYPE Indicates the total number of AppleTalk packets that have been administratively filtered, system-wide, during nwAtFwdCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.7 | Counter | read-only | mandatory |
| nwAtFwdCtrDiscardPkts OBJECT-TYPE Indicates the total number of AppleTalk packets that have been discarded, system-wide, during nwAtFwdCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.8 | Counter | read-only | mandatory |
| nwAtFwdCtrAddrErrPkts OBJECT-TYPE Indicates the total number of AppleTalk packets that have been discarded, system-wide, during nwAtFwdCtrOperationalTime because of addressing errors in the AppleTalk header. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.9 | Counter | read-only | mandatory |
| nwAtFwdCtrLenErrPkts OBJECT-TYPE Indicates the total number of AppleTalk packets that have been discarded, system-wide, during nwAtFwdCtrOperationalTime, because an invalid packet length is contained in the AppleTalk header. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.10 | Counter | read-only | mandatory |
| nwAtFwdCtrHdrErrPkts OBJECT-TYPE Indicates the total number of at packets that have been discarded, device-wide, during nwAtFwdCtrOperationalTime, because of an invalid at header. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.11 | Counter | read-only | mandatory |
| nwAtFwdCtrInBytes OBJECT-TYPE Indicates the total number of bytes in the AppleTalk packets that have been received, system-wide, during nwAtFwdCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.12 | Counter | read-only | mandatory |
| nwAtFwdCtrOutBytes OBJECT-TYPE Indicates the total number of bytes in the AppleTalk packets that have been transmitted, system-wide, during nwAtFwdCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.13 | Counter | read-only | mandatory |
| nwAtFwdCtrFwdBytes OBJECT-TYPE Indicates the total number of bytes in the AppleTalk packets that have been forwarded, system-wide, during nwAtFwdCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.14 | Counter | read-only | mandatory |
| nwAtFwdCtrFilteredBytes OBJECT-TYPE Indicates the total number of bytes in the AppleTalk packets that have been administratively filtered, system-wide, during nwAtFwdCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.15 | Counter | read-only | mandatory |
| nwAtFwdCtrDiscardBytes OBJECT-TYPE Indicates the total number of bytes in the AppleTalk packets that have been discarded, system wide, during nwAtFwdCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.16 | Counter | read-only | mandatory |
| nwAtFwdCtrHostInPkts OBJECT-TYPE Indicates the total number of AppleTalk packets that have been successfully delivered to the local host, during nwAtFwdCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.17 | Counter | read-only | mandatory |
| nwAtFwdCtrHostOutPkts OBJECT-TYPE Indicates the total number of AppleTalk packets that have been transmitted by the local host, during nwAtFwdCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.18 | Counter | read-only | mandatory |
| nwAtFwdCtrHostDiscardPkts OBJECT-TYPE Indicates the total number of AppleTalk packets that have been discarded by the local host, during nwAtFwdCtrOperationalTiime, due to a lack of host resources. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.19 | Counter | read-only | mandatory |
| nwAtFwdCtrHostInBytes OBJECT-TYPE Indicates the total number of bytes in the AppleTalk packets that have been received by the local host, during nwAtFwdCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.20 | Counter | read-only | mandatory |
| nwAtFwdCtrHostOutBytes OBJECT-TYPE Indicates the total number of bytes in the AppleTalk packets that have been transmitted by the local host, during nwAtFwdCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.21 | Counter | read-only | mandatory |
| nwAtFwdCtrHostDiscardBytes OBJECT-TYPE Indicates the total number of bytes in the AppleTalk packets that have been discarded by the local host, during nwAtFwdCtrOperationalTime, due to a lack of host resources. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.22 | Counter | read-only | mandatory |
| nwAtFwdInterfaces OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2 | |||
| nwAtFwdIfConfig OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1 | |||
| nwAtFwdIfTable OBJECT-TYPE This table contains an entry for each router port. This table is indexed by nwAtFwdIfIndex, which indicates the value of MIB 2 ifindex, which identifies the router port for which each entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1 | not-accessible | mandatory | |
| nwAtFwdIfEntry OBJECT-TYPE Each entry specifies the AppeTalk Routing Services configuration for the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1 | not-accessible | mandatory | |
| nwAtFwdIfIndex OBJECT-TYPE Indicates the value of the MIB 2 ifIndex, which identifies the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.1 | INTEGER | read-only | mandatory |
| nwAtFwdIfAdminSTATUS OBJECT-TYPE Sets the administrative state of AppleTalk Routing Services on the router port for which the entry exists. Enabled (3) causes AppleTalk Routing Services to become active. Disabled (2) causes it to become inactive. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.2 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwAtFwdIfOperSTATUS OBJECT-TYPE Indicates the current operating condition of AppleTalk Routing Services on the AppleTalk router port for which the entry exists. The value of nwAtFwdIfOperStatus indicates any problem with the configuration of AppleTalk Routing Services on the router port. A value of 6 indicates that regardless of the state of nwAtFwdIfAdminStatus AppleTalk Routing Services is not operating because of an invalid port-level configuration. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.3 | INTEGER {other(1), disabled(2), enabled(3), pending-disable(4), pending-enable(5), invalid-config(6)} | read-only | mandatory |
| nwAtFwdIfOperationalTime OBJECT-TYPE Indicates the elapsed time, in hundredths of a second, that nwAtFwdIfOper Status has been in its current state. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.4 | TimeTicks | read-only | mandatory |
| nwAtFwdIfControl OBJECT-TYPE This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting this object has no effect. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.5 | INTEGER {other(1), add(2), delete(3)} | read-write | mandatory |
| nwAtFwdIfMtu OBJECT-TYPE Specifies the Maximum Transmissions Unit (MTU) for AppleTalk packets on the router port for which the entry exists. This includes the AppleTalk header and data, but does not include framing. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.6 | INTEGER | read-write | mandatory |
| nwAtFwdIfForwarding OBJECT-TYPE Controls forwarding of AppleTalk packets on the AppleTalk router port for which the entry exists. Enabled (3) causes AppleTalk packets to be forwarded. Disabled (2) prevents AppleTalk packets from being forwarded. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.7 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwAtFwdIfFrameType OBJECT-TYPE Specifies the framing type for AppleTalk packets forwarded on the router port for which the entry exists. Some frame types are only valid for specific media types. The comments reflect those valid media types. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.8 | INTEGER {other(1), ethernet(2), snap(3), nativewan(8), encapenet(9), encapenetsnap(11), encapfddisnap(16), canonical(17)} | read-write | mandatory |
| nwAtFwdIfAclIdentifier OBJECT-TYPE Specifies the Access Control ID of the access control list in effect for AppleTalk packets being routed on the router port for which the entry exists. A value of 0 indicates that no access control list is in effect. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.9 | INTEGER | read-write | mandatory |
| nwAtFwdIfAclSTATUS OBJECT-TYPE Controls the operation of any access control list configured for AppleTalk traffic on the router port for which the entry exists. Enabled (3) applies the access control list indicated by the value of nwAtFwdIfAclIdentifier to all AppleTalk traffic being routed on the port. Disabled (2) prevents the access control list from being applied. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.10 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwAtFwdIfCacheControl OBJECT-TYPE Controls AppleTalk Address caching on the router port for which the entry exists. When AppleTalk Address caching is enabled, AppleTalk Addresses used for address validation, filtering, and forwarding are stored in the cache. This cache is checked first before doing a full route table lockup, which speeds up the switching process. Enabled (3) turns on AppleTalk Address caching. Disabled (2) turns it off. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.11 | INTEGER {other(1), disable(2), enable(3)} | read-write | mandatory |
| nwAtFwdIfCacheEntries OBJECT-TYPE Indicates the number of entries in the AppleTalk Address cache on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.12 | Counter | read-only | mandatory |
| nwAtFwdIfCacheHits OBJECT-TYPE Indicates the number of times entries in the AppleTalk Address cache have been used to provide the AppleTalk address required to validate, filter, or forward an AppleTalk packet on the router port. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.13 | Counter | read-only | mandatory |
| nwAtFwdIfCacheMisses OBJECT-TYPE Indicates the number of times the AppleTalk Address required to validate, filter, or forward an AppleTalk packet on the router port was not found in the AppleTalk Address cache. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.14 | Counter | read-only | mandatory |
| nwAtportTable OBJECT-TYPE This table contains an entry for each router port configured for AppleTalk Routing Services. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2 | not-accessible | mandatory | |
| nwAtportEntry OBJECT-TYPE Each entry specifies the AppleTalk address information for the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1 | not-accessible | mandatory | |
| nwAtportIndex OBJECT-TYPE Indicates a unique value for each router port. The value of nwAtportIndex is an integer between 1 and the total number of ports configured for AppleTalk Routing Services. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.1 | INTEGER | read-only | mandatory |
| nwAtportDescr OBJECT-TYPE This text string provides a description of the port to the end-user; it must not contain anything but printable ASCII characters. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.2 | DisplayString | read-write | mandatory |
| nwAtportType OBJECT-TYPE The value of nwArPortType indicates which link-layer protocol is running immediately below DDP in the protocol stack on the router port for which the entry exists. The value of nwAtPortType determines the format of address octet stings throughout the entire AppleTalk MIB. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.3 | INTEGER {other(1), localtalk(2), ethertalk1(3), ethertalk2(4), tokentalk(5), iptalk(6), serialPPP(7), serialNonstandard(8), virtual(9), fdditalk(10), arctalk(11), smdstalk(12), aurp(13), frameRelay(14), x25(15), ip(16), osi(17), decnetIV(18), arap(19), isdnInThePacketMode(20), nonAppleTalk3Com(21), ipx(22), arns(23), hdlc(24)} | read-write | mandatory |
| nwAtportNetStart OBJECT-TYPE The first AppleTalk network address in the network range configured for the port. If the port is not a native AppleTalk port, this object will have the value of two octets of zero. Set this value to the first network address in the network range configured for the port. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.4 | AtNetworkNumber | read-write | mandatory |
| nwAtportNetEnd OBJECT-TYPE The last AppleTalk network address in the network range configured for the port. If the network to which this AppleTalk port is connected is a non-extended network, or if it is not a native AppleTalk port, the value for nwAtportNetEnd will be two octets of zero. Set this value to the last network address in the network range configured for the port. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.5 | AtNetworkNumber | read-write | mandatory |
| nwAtportNetAddress OBJECT-TYPE The AppleTalk node number configured for the port. This value may be used as a hint for an initial node number used during node-finding. If the port is not a native AppleTalk port, this object shall have the value of three octets of zero. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.6 | AtDdpNodeAddress | read-write | mandatory |
| nwAtportSTATUS OBJECT-TYPE Indicates the current state of the router port's AppleTalk configuration. If either nwAtportNetConfig or nwApportZoneConfig are set to (5), conflictAverseSeed, and either the configured network number range or zone name seeded by the port conflict with the settings of a neighbor router, nwApPortStatus will have a value of (6), offDueToConflict. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.7 | INTEGER {routing(1), unconfigured(2), off(3), invalid(4), endNode(5), offDueToConflict(6), other(7)} | read-write | mandatory |
| nwAtportNetConfig OBJECT-TYPE Specifies the network configuration type of the port. If the port is not a native AppleTalk port, this object will have an unconfigured (4) value. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.8 | INTEGER {conflictOrientedSeed(1), garnered(2), guessed(3), unconfigured(4), conflictAverseSeed(5), softSeed(6)} | read-write | mandatory |
| nwAtportZoneConfig OBJECT-TYPE Specifies the zone information configuration type of the port. If the port is not a native AppleTalk port, this object will have an unconfigured (4) value. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.9 | INTEGER {conflictOrientedSeed(1), garnered(2), guessed(3), unconfigured(4), conflictAverseSeed(5), softSeed(6)} | read-write | mandatory |
| nwAtportZoneDefault OBJECT-TYPE Specifies the name of the default zone for the port. If the port only has one zone, that zone is represented here. If the port is not a native AppleTalk port, this object will contain an octet string of zero length. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.10 | AtName | read-write | mandatory |
| nwAtportIfIndex OBJECT-TYPE Indicates the value of MIB 2 ifIndex, which identifies the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.11 | INTEGER | read-write | mandatory |
| nwAtportNetFrom OBJECT-TYPE When nwAtportNetConfig is set to garnered (2), this variable contains the DDP address of the entity from which the AppleTalk network number was garnered. When nwAtportNetConfig is set to conflictOrientedSeed (1), conflictAverseSeed (5), or softSeed (6), this variable contains the DDP address of an entity which supplied or confirmed the AppleTalk network number. If nwAtportNetConfig is set to guessed (3) or unconfigured (4), or if the AppleTalk Routing Services-enabled device has not received any network number confirmation, this object will be set to three octets of zero. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.12 | AtDdpNodeAddress | read-only | mandatory |
| nwAtportZoneFrom OBJECT-TYPE When nwAtportZoneConfig is set to garnered (2), this variable contains the DDP address of the entity from which the AppleTalk Zone List was garnered. When nwAtportZoneConfig is set to conflictOrientedSeed (1), conflictAverseSeed (5), or softSeed (6), this variable contains the DDP address of an entity which supplied or confirmed the AppleTalk zone information. If nwAtportZoneConfig is set to guessed (3) or unconfigured (4), or if the AppleTalk Routing Services-enabled device has not received any zone confirmation, this object will be set to three octets of zero. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.13 | AtDdpNodeAddress | read-only | mandatory |
| nwAtportInPkts OBJECT-TYPE The total number of AppleTalk packets received on the port. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.14 | Counter | read-only | mandatory |
| nwAtportOutPkts OBJECT-TYPE The total number of AppleTalk packets transmitted on the port. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.15 | Counter | read-only | mandatory |
| nwAtportHome OBJECT-TYPE The value of nwAtportHome indicates whether or not the AppleTalk Routing Services-enabled device, the routing entity, is `homed' on the port for which the entry exists. If the entity is homed on the port, then it could perform NBP (Name Binding Protocol) registrations for services that it chooses to advertise. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.16 | INTEGER {home(1), notHome(2)} | read-only | mandatory |
| nwAtportCurrentZone OBJECT-TYPE Specifies the current zone name for the port. In general, this is the zone name in which services on the port will be registered. If the port is not a native AppleTalk port, this object will contain an octet string of zero length. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.17 | AtName | read-write | mandatory |
| nwAtportConflictPhysAddr OBJECT-TYPE Indicates the link-layer address of the device which caused nwAtportStatus to be set to off (3). If this address is not available, or if nwAtportStatus is not set to off, this object will be a zero length octet string. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.18 | OCTET STRING | read-only | mandatory |
| nwAtFwdIfCounters OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2 | |||
| nwAtFwdIfCtrTable OBJECT-TYPE This table contains an entry for each router port configured and enabled for AppleTalk Routing Services. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1 | not-accessible | mandatory | |
| nwAtFwdIfCtrEntry OBJECT-TYPE Each entry indicates the current packet and byte count of AppleTalk packets on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1 | not-accessible | mandatory | |
| nwAtFwdIfCtrIfIndex OBJECT-TYPE Indicates the value MIB 2 ifindex, which identifies the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.1 | INTEGER | read-only | mandatory |
| nwAtFwdIfCtrAdminSTATUS OBJECT-TYPE Sets the administrative state of the per-port AppleTalk packet and byte counters on the router port for which the entry exists. Enabled (3) causes these counters to become active. Disabled (2) causes these counters to become inactive. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.2 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwAtFwdIfCtrReset OBJECT-TYPE Resets the per-port AppleTalk packet and byte counters on the router port for which the entry exists. Reset (2) resets the counters to 0. nwAtFwdIfCtrOperationalTime is also reset to 0. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.3 | INTEGER {other(1), reset(2)} | read-write | mandatory |
| nwAtFwdIfCtrOperationalTime OBJECT-TYPE Indicates the amount of time, in hundredths of a second, that nwAtFwdIfCtrAdminStatus has been in the current state. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.4 | TimeTicks | read-only | mandatory |
| nwAtFwdIfCtrInPkts OBJECT-TYPE Indicates the total number of AppleTalk packets that have been received, during nwAtFwdIfCtrOperationaltime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.5 | Counter | read-only | mandatory |
| nwAtFwdIfCtrOutPkts OBJECT-TYPE Indicates the total number of AppleTalk packets that have been transmitted, during nwAtFwdIfCtrOperationaltime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.6 | Counter | read-only | mandatory |
| nwAtFwdIfCtrFwdPkts OBJECT-TYPE Indicates the total number of AppleTalk packets that have been forwarded, during nwAtFwdIfCtrOperationaltime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.7 | Counter | read-only | mandatory |
| nwAtFwdIfCtrFilteredPkts OBJECT-TYPE Indicates the total number of AppleTalk packets that have been administratively filtered, during nwAtFwdIfCtrOperationalTime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.8 | Counter | read-only | mandatory |
| nwAtFwdIfCtrDiscardPkts OBJECT-TYPE Indicates the total number of AppleTalk packets that have been discarded (dropped), during nwAtFwdIfCtrOperationalTime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.9 | Counter | read-only | mandatory |
| nwAtFwdIfCtrAddrErrPkts OBJECT-TYPE Indicates the total number of AppleTalk packets that have been discarded, because of addressing errors in the AppleTalk header, during nwAtFwdIfCtrOperationalTime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.10 | Counter | read-only | mandatory |
| nwAtFwdIfCtrLenErrPkts OBJECT-TYPE Indicates the total number of AppleTalk packets that have been discarded, because an invalid packet length was contained in the AppleTalk header, during nwAtFwdIfCtrOperationalTime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.11 | Counter | read-only | mandatory |
| nwAtFwdIfCtrHdrErrPkts OBJECT-TYPE Indicates the total number of AppleTalk packets that have been discarded, because of an invalid AppleTalk header, during nwAtFwdIfCtrOperationalTime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.12 | Counter | read-only | mandatory |
| nwAtFwdIfCtrInBytes OBJECT-TYPE Indicates the total number of bytes in the AppleTalk packets that have been received, during nwAtFwdIfCtrOperationalTime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.13 | Counter | read-only | mandatory |
| nwAtFwdIfCtrOutBytes OBJECT-TYPE Indicates the total number of bytes in the AppleTalk packets that have been transmitted, durin nwAtFwdIfCtrOperationalTime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.14 | Counter | read-only | mandatory |
| nwAtFwdIfCtrFwdBytes OBJECT-TYPE Indicates the total number of bytes in the AppleTalk packets that have been forwarded, during nwAtFwdIfCtrOperationalTime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.15 | Counter | read-only | mandatory |
| nwAtFwdIfCtrFilteredBytes OBJECT-TYPE Indicates the total number of bytes in the AppleTalk packets that have been administratively filtered, during nwAtFwdIfCtrOperationalTime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.16 | Counter | read-only | mandatory |
| nwAtFwdIfCtrDiscardBytes OBJECT-TYPE Indicates the total number of bytes in the AppleTalk packets that have been discarded, during nwAtFwdIfCtrOperationalTime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.17 | Counter | read-only | mandatory |
| nwAtFwdIfCtrHostInPkts OBJECT-TYPE Indicates the total number of AppleTalk packets that have been successfully delivered to the local host during nwAtFwdIfCtrOperationalTime, that were received on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.18 | Counter | read-only | mandatory |
| nwAtFwdIfCtrHostOutPkts OBJECT-TYPE Indicates the total number of AppleTalk packets that have been transmitted by the local host, during nwAtFwdIfCtrOperationalTime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.19 | Counter | read-only | mandatory |
| nwAtFwdIfCtrHostDiscardPkts OBJECT-TYPE Indicates the total number of AppleTalk packets that have been discarded by the local host due to a lack of host resources during nwAtFwdIfCtrOperationalTime, that were received on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.20 | Counter | read-only | mandatory |
| nwAtFwdIfCtrHostInBytes OBJECT-TYPE Indicates the total number of bytes in the AppleTalk packets that have been successfully delivered to the local host, during nwAtFwdIfCtrOperationalTime, that were received on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.21 | Counter | read-only | mandatory |
| nwAtFwdIfCtrHostOutBytes OBJECT-TYPE Indicates the total number of bytes in the AppleTalk packets that have been transmitted by the local host, during nwAtFwdIfCtrOperationalTime, on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.22 | Counter | read-only | mandatory |
| nwAtFwdIfCtrHostDiscardBytes OBJECT-TYPE Indicates the total number of bytes in the AppleTalk packets that have been discarded by the local host, due to a lack of host resources during nwAtFwdIfCtrOperationalTime, that were received on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.23 | Counter | read-only | mandatory |
| nwAtTopology OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4 | |||
| nwAtDistanceVector OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1 | |||
| nwAtProto OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1 | |||
| nwAtProtoSystem OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1 | |||
| nwAtProtoConfig OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1 | |||
| nwAtProtoAdminSTATUS OBJECT-TYPE Sets the administrative state of the AppleTalk distance-vector based routing protocol system-wide. Enabled (3) causes the routing protocol to become active on all router ports configured and enabled for AppleTalk Routing Services. Disabled (2) causes the routing protocol to become inactive. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.1 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwAtProtoOperSTATUS OBJECT-TYPE Indicates the current operating condition of the AppleTalk Routing Services distance-vector-based routing protocol, system-wide. The value of nwAtProtoOperStatus indicates any problem with the routing protocol configuration. A value of 6 indicates that regardless of the value of nwAtProtoAdminStatus, the routing protocol is not operating because of an invalid configuration. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.2 | INTEGER {other(1), disabled(2), enabled(3), pending-disable(4), pending-enable(5)} | read-only | mandatory |
| nwAtProtoAdminReset OBJECT-TYPE Resets the routing protocol. Reset (2) forces a system-wide restart of the protocol without a graceful shutdown on any active router ports. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.3 | INTEGER {other(1), reset(2)} | read-write | mandatory |
| nwAtProtoOperationalTime OBJECT-TYPE Indicates the elapsed time, in hundredths of a second, that nwAtProtoOperStatus has been in the current state. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.4 | TimeTicks | read-only | mandatory |
| nwAtProtoVersion OBJECT-TYPE Indicates the current revision level of the AppleTalk routing protocol firmware, in textual format. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.5 | DisplayString | read-only | mandatory |
| nwAtProtoStackSize OBJECT-TYPE Specifies the stack size of the AppleTalk routing protocol thread. In order for a change of this value to take effect, the protocol (nwAtProtoAdminReset), AppleTalk Routing Services (nwAtProtoAdminReset), or the device running Routing Services must be reset. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.6 | INTEGER | read-write | mandatory |
| nwAtProtoThreadPriority OBJECT-TYPE Specifies the run-time execution priority of the AppleTalk routing protocol thread. In order for a change of this value to take effect, the AppleTalk protocol (nwAtProtoAdminReset), AppleTalk Routing Services (nwAtProtoAdminReset), or the device running Routing Services must be reset. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.7 | INTEGER | read-write | mandatory |
| nwAtProtoDatabaseThreshold OBJECT-TYPE Specifies the run-time maximum number of entries that can be held in the AppleTalk routing protocol route table. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.8 | INTEGER | read-write | mandatory |
| nwAtProtoAgeOut OBJECT-TYPE Specifies the amount of time (in seconds) an inactive entry will be allowed to remain in the AppleTalk routing protocol routing table, before it is deleted, or aged-out. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.9 | INTEGER | read-write | mandatory |
| nwAtProtoHoldDown OBJECT-TYPE This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting this object has no effect. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.10 | INTEGER | read-write | mandatory |
| nwAtProtoCounters OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2 | |||
| nwAtProtoCtrAdminSTATUS OBJECT-TYPE Sets the administrative state of the aggregate (system-wide) AppleTalk routing protocol packet and byte counters. Enabled (3)causes these counters to become active. Disabled (2) causes these counters to be come inactive. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.1 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwAtProtoCtrReset OBJECT-TYPE Resets the aggregate (system-wide) AppleTalk distance-vector based routing protocol packet and byte counters. Reset (2) resets the AppleTalk aggregate counters to 0. nwAtProtoCtrOperationalTime is also reset to 0. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.2 | INTEGER {other(1), reset(2)} | read-write | mandatory |
| nwAtProtoCtrOperationalTime OBJECT-TYPE Indicates the elapsed time, in hundreds of seconds, that nwAtProtoCtrAdminStatus, has been in the current administrative state. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.3 | TimeTicks | read-only | mandatory |
| nwAtProtoCtrInPkts OBJECT-TYPE Indicates the total number of AppleTalk routing protocol packets that have been received, system-wide, during nwAtProtoCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.4 | Counter | read-only | mandatory |
| nwAtProtoCtrOutPkts OBJECT-TYPE Indicates the total number of AppleTalk routing protocol packets that have been transmitted, system-wide, during nwAtProtoCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.5 | Counter | read-only | mandatory |
| nwAtProtoCtrFilteredPkts OBJECT-TYPE Indicates the total number of AppleTalk routing protocol packets that have been administratively filtered, system-wide, during nwAtProtoCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.6 | Counter | read-only | mandatory |
| nwAtProtoCtrDiscardPkts OBJECT-TYPE Indicates the total number of AppleTalk routing protocol packets that have been discarded, system-wide, during nwAtProtoCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.7 | Counter | read-only | mandatory |
| nwAtProtoCtrInBytes OBJECT-TYPE Indicates the total number of bytes in the AppleTalk routing protocol packets that have been received, system-wide, during nwAtProtoCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.8 | Counter | read-only | mandatory |
| nwAtProtoCtrOutBytes OBJECT-TYPE Indicates the total number of bytes in the AppleTalk routing protocol packets that have been transmitted, system-wide, during nwAtProtoCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.9 | Counter | read-only | mandatory |
| nwAtProtoCtrFilteredBytes OBJECT-TYPE Indicates the total number of bytes in the AppleTalk routing protocol packets that have been administratively filtered, system-wide, during nwAtProtoCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.10 | Counter | read-only | mandatory |
| nwAtProtoCtrDiscardBytes OBJECT-TYPE Indicates the total number of bytes in the AppleTalk routing protocol packets that have been discarded, system-wide during nwAtProtoCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.11 | Counter | read-only | mandatory |
| nwAtProtoInterface OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2 | |||
| nwAtProtoIfConfig OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1 | |||
| nwAtProtoIfTable OBJECT-TYPE This table contains an entry for each router port. Each entry can contain different values, allowing the routing protocol configuration to vary from router port to router port. This table is indexed by nwAtProtoIfIndex, which indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1 | not-accessible | mandatory | |
| nwAtProtoIfEntry OBJECT-TYPE Each entry contains the AppleTalk routing protocol configuration for the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1 | not-accessible | mandatory | |
| nwAtProtoIfIndex OBJECT-TYPE Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.1 | INTEGER | read-only | mandatory |
| nwAtProtoIfAdminSTATUS OBJECT-TYPE Sets the administrative state of the AppleTalk routing protocol on the router port for which the entry exists. Enabled (3) causes the routing protocol to become active on the router port. Disabled (2) causes it to become inactive. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.2 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwAtProtoIfOperSTATUS OBJECT-TYPE Indicates the current operating condition of the AppleTalk routing protocol on the router port for which the entry exists. The value of nwAtProtoIfOperStatus indicates any problem with your AppleTalk routing protocol configuration on the router port. A value of 6 indicates that regardless of the value of nwAtProtoIfAdminStatus, the routing protocol is not operating on the router port because of an invalid configuration. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.3 | INTEGER {other(1), disabled(2), enabled(3), pending-disable(4), pending-enable(5)} | read-only | mandatory |
| nwAtProtoIfOperationalTime OBJECT-TYPE Indicates the elapsed time, in hundreds of seconds, that nwAtProtoIfOperStatus has been in the current state. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.4 | TimeTicks | read-only | mandatory |
| nwAtProtoIfVersion OBJECT-TYPE Indicates the revision level of AppleTalk routing protocol firmware on the router port for which the entry exists, in textual format. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.5 | INTEGER | read-write | mandatory |
| nwAtProtoIfAdvertisement OBJECT-TYPE This specifies the periodic interval (in seconds) that the AppleTalk routing protocol agent will advertise routes on this DECnet routing port. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.6 | INTEGER | read-write | mandatory |
| nwAtProtoIfFloodDelay OBJECT-TYPE This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol specific MIBs. Setting this object has no effect | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.7 | INTEGER | read-write | mandatory |
| nwAtProtoIfRequestDelay OBJECT-TYPE This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol specific MIBs. Setting this object has no effect. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.8 | INTEGER | read-write | mandatory |
| nwAtProtoIfPriority OBJECT-TYPE Sets the priority of the AppleTalk routing protocol on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.9 | INTEGER | read-write | mandatory |
| nwAtProtoIfHelloTimer OBJECT-TYPE This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol specific MIBs. Setting this object has no effect. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.10 | INTEGER | read-write | mandatory |
| nwAtProtoIfSplitHorizon OBJECT-TYPE Sets the operating condition of Split Horizon on the router port for which the entry exists. When Split Horizon is enabled, the AppleTalk routing protocol keeps track of which router port route information is received on, and prevents information about a route form being sent back out the same router port it was received on. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.11 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwAtProtoIfPoisonReverse OBJECT-TYPE Sets the operating condition of Poison Reverse on the router port for which the entry exists. When Poison Reverse is enabled, the AppleTalk routing protocol advertises any downed routes as unreachable during the period of time that it must wait before removing the route from the route table. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.12 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwAtProtoIfSnooping OBJECT-TYPE Controls the operation of AppleTalk routing protocol Snooping on the router port. When AppleTalk routing protocol Snooping is enabled, the routing protocol operates in passive mode, so that it receives route information, builds and maintains a route table, but does not advertise or send updates on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.13 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwAtProtoIfType OBJECT-TYPE Indicates whether the directly connected network segment does or does not support broadcast media access. If broadcast media access is supported, AppleTalk routing protocol advertisements are sent out one broadcast packet per port. If broadcast media is not supported, AppleTalk routing protocol advertisements are sent to each neighbor. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.14 | INTEGER {other(1), bma(2), nbma(3)} | read-write | mandatory |
| nwAtProtoIfXmitCost OBJECT-TYPE Sets the cost of transmitting a packet on the network segment connected to router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.15 | INTEGER | read-write | mandatory |
| nwAtProtoIfAclIdentifier OBJECT-TYPE Specifies the Access Control List ID of the access control list in effect for AppleTalk routing protocol packets on the router port for which the entry exists. A value of 0 indicates that there is no access control list in effect for AppleTalk routing protocol packets on the router port. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.16 | INTEGER | read-write | mandatory |
| nwAtProtoIfAclSTATUS OBJECT-TYPE Controls the operation of the access control list identified by nwAtProtoIfAclIdentifier. Enabled (3) causes the access control list to be applied to all AppleTalk routing protocol packet traffic on the router port for which the entry exists. Disabled (2) prevents the access control list from being applied. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.17 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwAtProtoIfCounters OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2 | |||
| nwAtProtoIfCtrTable OBJECT-TYPE This table contains the AppleTalk packet and byte counters for each router port on this device. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1 | not-accessible | mandatory | |
| nwAtProtoIfCtrEntry OBJECT-TYPE Each entry specifies the DECnet Phase IV packet and byte counters on a per router port basis. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1 | not-accessible | mandatory | |
| nwAtProtoIfCtrIfIndex OBJECT-TYPE This is the primary index into the AppleTalk interface counter table. This number corresponds to the index into the mib2 InterfaceTable which describes the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.1 | INTEGER | read-only | mandatory |
| nwAtProtoIfCtrAdminSTATUS OBJECT-TYPE Sets the administrative state of the AppleTalk packet and byte counters on the router port for which the entry exists. enabled(3) causes these counters to become active on the configured AppleTalk router port. disabled(2) causes these counters to become inactive on the configured AppleTalk router port. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.2 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwAtProtoIfCtrReset OBJECT-TYPE Resets the AppleTalk packet and byte counters on the router port for which the entry exists. reset (2) resets the interface-specific counters to 0. nwAtProtoIfCtrOperationalTime is also reset to 0. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.3 | INTEGER {other(1), reset(2)} | read-write | mandatory |
| nwAtProtoIfCtrOperationalTime OBJECT-TYPE Indicates the amount of time (No. of time ticks) that the interface-specific AppleTalk packet and byte counters have been active on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.4 | TimeTicks | read-only | mandatory |
| nwAtProtoIfCtrInPkts OBJECT-TYPE Indicates the total number of AppleTalk packets that have been received, on the router port for which the entry exists, during nwAtProtoIfCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.5 | Counter | read-only | mandatory |
| nwAtProtoIfCtrOutPkts OBJECT-TYPE Indicates the total number of AppleTalk packets that have been forwarded, on the router port for which the entry exists, during nwAtProtoIfCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.6 | Counter | read-only | mandatory |
| nwAtProtoIfCtrFilteredPkts OBJECT-TYPE Indicates the total number of AppleTalk packets that have been administratively filtered, on the router port for which this entry exists, during nwAtProtoIfCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.7 | Counter | read-only | mandatory |
| nwAtProtoIfCtrDiscardPkts OBJECT-TYPE Indicates the total number of AppleTalk packets that have been discarded, on the router port for which the entry exists, during nwAtProtoIfCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.8 | Counter | read-only | mandatory |
| nwAtProtoIfCtrInBytes OBJECT-TYPE Indicates the total number of bytes in the AppleTalk packets that have been received, on the router port for which the entry exists, during nwAtProtoIfCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.9 | Counter | read-only | mandatory |
| nwAtProtoIfCtrOutBytes OBJECT-TYPE Indicates the total number of bytes in the AppleTalk packets that have been forwarded, on the router port for which the entry exists, during nwAtProtoIfCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.10 | Counter | read-only | mandatory |
| nwAtProtoIfCtrFilteredBytes OBJECT-TYPE Indicates the total number of bytes in the AppleTalk packets that have been administratively filtered, that were received on the router port for which the entry exists, during nwAtProtoIfCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.11 | Counter | read-only | mandatory |
| nwAtProtoIfCtrDiscardBytes OBJECT-TYPE Indicates the total number of bytes in the AppleTalk packets that have been discarded, that were received on the router port for which the entry exists, during nwAtIfCtrOperationalTime. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.12 | Counter | read-only | mandatory |
| nwAtLinkState OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.2 | |||
| nwAtFib OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.5 | |||
| nwAtFibTable OBJECT-TYPE This table contains an entry for each route being used to forward AppleTalk data packets. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1 | not-accessible | mandatory | |
| nwAtFibEntry OBJECT-TYPE Each entry in the table describes an AppleTalk route to a particular destination. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1.1 | not-accessible | mandatory | |
| nwAtFibStartNet OBJECT-TYPE Indicates the start of the network range for the route. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1.1.1 | AtNetworkNumber | read-only | mandatory |
| nwAtFibEndNet OBJECT-TYPE Indicates the end of the network range for the route. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1.1.2 | AtNetworkNumber | read-only | mandatory |
| nwAtFibNextHop OBJECT-TYPE Indicates the full AppleTalk network address of the next hop router for the route. An address of all zeros indicates a directly connected net. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1.1.3 | AtDdpNodeAddress | read-only | mandatory |
| nwAtFibNextHopIf OBJECT-TYPE Indicates the value of MIB 2 ifindex, which identifies the router port through which the next hop node exists. Packets destined for the network specified by the entry will be forwarded on this router port. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1.1.4 | INTEGER | read-only | mandatory |
| nwAtFibHops OBJECT-TYPE Indicates the number of hops required to reach the destination for which the entry exists. It is considered as metric 1. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1.1.5 | INTEGER | read-only | mandatory |
| nwAtFibRouteType OBJECT-TYPE Indicates the type of route (Allows for PPP entries later). | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1.1.6 | INTEGER {other(1), appleTalk(2)} | read-only | mandatory |
| nwAtEndSystems OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6 | |||
| nwAtHostsSystem OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.1 | |||
| nwAtHostsTimeToLive OBJECT-TYPE Indicates the amount of time (in minutes) that an entry can remain in the AARP cache. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.1.1 | INTEGER | read-only | mandatory |
| nwAtHostsRetryCount OBJECT-TYPE Indicates the maximum number of times AppleTalk Routing Services will retry each attempt to resolve a host address. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.1.2 | Counter | read-only | mandatory |
| nwAtHostsInterfaces OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2 | |||
| nwAtHostCtlTable OBJECT-TYPE This table contains the control information for maintaining an AARP cache on each router port. Note that the cache entries are maintained by theAppleTalk Address Resolution Protocol Table of the AppleTalk MIB. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1 | not-accessible | mandatory | |
| nwAtHostCtlEntry OBJECT-TYPE Each entry contains the control information for the ARP cache on the router port indicated by the value nwAtHostCtlIfIndex. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1 | not-accessible | mandatory | |
| nwAtHostCtlIfIndex OBJECT-TYPE Indicates the value of MIB2 ifindex, which identifies the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.1 | INTEGER | read-only | mandatory |
| nwAtHostCtlAdminSTATUS OBJECT-TYPE Sets the administrative state of the AARP cache on the router port for which the entry exists. Enabled (3) causes AARP caching to become active. Disabled (2) causes AARP caching to perform a graceful shutdown. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.2 | INTEGER {other(1), disable(2), enable(3)} | read-write | mandatory |
| nwAtHostCtlOperSTATUS OBJECT-TYPE Indicates the current operating condition of the AARP Table on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.3 | INTEGER {other(1), disabled(2), enabled(3), pending-disable(4), pending-enable(5)} | read-only | mandatory |
| nwAtHostCtlOperationalTime OBJECT-TYPE Indicates the amount of time, in hundredths of a second, that nwAtHostCtlOperStatus has been in the current state. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.4 | TimeTicks | read-only | mandatory |
| nwAtHostCtlProtocol OBJECT-TYPE Controls the operation of the AARP protocol on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.5 | INTEGER {other(1), disable(2), enable(3)} | read-write | mandatory |
| nwAtHostCtlSnooping OBJECT-TYPE Controls AARP Snooping on the router port for which the entry exists. Given the AARP protocol is enabled, setting nwAtHostCtlIfSnooping to enabled (3) turns on AARP Snooping. When AARP Snooping is enabled the source AppleTalk and physical addresses of all AARP packets received on the router port are added to the AARP Table. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.6 | INTEGER {other(1), disable(2), enable(3)} | read-write | mandatory |
| nwAtHostCtlProxy OBJECT-TYPE This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting this object has no effect. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.7 | INTEGER {other(1), disable(2), enable(3)} | read-write | mandatory |
| nwAtHostCtlCacheMax OBJECT-TYPE Indicates the maximum number of entry slots the AARP cache can consist of. nwAtHostCtlCacheMax cannot be set to less than 16. Setting this value does not allocate any memory for the cache. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.8 | INTEGER | read-write | mandatory |
| nwAtHostCtlCacheSize OBJECT-TYPE Indicates the current number of entry slots in the AARP cache on the router port for which the entry exists. The cache automatically resizes to accommodate all entries up to the maximum number of entries set by nwAtHostCtlCacheMax. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.9 | INTEGER | read-write | mandatory |
| nwAtHostCtlNumStatics OBJECT-TYPE Indicates the total number of static entries in the AARP cache on the router port for which the entry exists. Static entries remain in the cache until they are administratively removed. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.10 | Counter | read-only | mandatory |
| nwAtHostCtlNumDynamics OBJECT-TYPE Indicates the number of dynamic entries in the AARP cache on the router port for which the entry exists. Dynamic entries area added and aged out by the AARP protocol. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.11 | Counter | read-only | mandatory |
| nwAtHostCtlCacheHits OBJECT-TYPE Indicates the number of times an entry in the AARP cache has been used to successfully provide the physical address required to forward an AppleTalk packet on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.12 | Counter | read-only | mandatory |
| nwAtHostCtlCacheMisses OBJECT-TYPE Indicates the number of times the physical address required to forward an AppleTalk packet has not been found in the AARP cache on the router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.13 | Counter | read-only | mandatory |
| nwAtHostsToMedia OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3 | |||
| nwAtHostMapTable OBJECT-TYPE The Ip Address translation table used for mapping an IP address to physical address, framing, port and circuit identifier, if applicable. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1 | not-accessible | mandatory | |
| nwAtHostMapEntry OBJECT-TYPE Each entry contains one AtNetworkNumber to 'physical' address equivalence, including a circuit identifier if applicable. Also provided is the framing and port number required to converse with this host. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1 | not-accessible | mandatory | |
| nwAtHostMapIfIndex OBJECT-TYPE This is the primary (major) index into the HostMap table. This number corresponds to the index into the MIB-2 Interfaces Group which describes the IP router port for which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1.1 | INTEGER | read-only | mandatory |
| nwAtHostMapAtAddr OBJECT-TYPE The AtDdpNodeAddress corresponding to the media-dependent 'physical' address and circuit identifier (if applic). | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1.2 | AtDdpNodeAddress | read-only | mandatory |
| nwAtHostMapPhysAddr OBJECT-TYPE The media-dependent 'physical' address. The value of this object is 0 for entries indicating native-wan(8) framing. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1.3 | PhysAddress | read-write | mandatory |
| nwAtHostMapType OBJECT-TYPE Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the nwAtHostMapTable. That is, it effectively dissasociates the circuit identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant nwAtHostMapType object. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1.4 | INTEGER {other(1), invalid(2), dynamic(3), static(4), inactive(5)} | read-write | mandatory |
| nwAtHostMapCircuitID OBJECT-TYPE The identifier for the virtual circuit present on the interface. On an interface configured for Frame Relay, this number is the DLCI for the IP Address at the end of the circuit. For non-WAN interfaces, the value of this object is zero. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1.5 | INTEGER | read-write | mandatory |
| nwAtHostMapFraming OBJECT-TYPE Specifies the framing type required to converse with the host for which this entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1.6 | INTEGER {other(1), ethernet(2), snap(3), nativewan(8), encapenet(9), encapenetsnap(11), encapfddisnap(16), canonical(17)} | read-write | mandatory |
| nwAtHostMapPortNumber OBJECT-TYPE The unique value for the logical port number. It's value ranges between 1 and a maximum value which is dependent on both the number of interfaces in the system and the number of circuits present on interfaces which are of WAN type. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1.7 | INTEGER | read-only | mandatory |
| nwAtAccessControl OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7 | |||
| nwAtAclValidEntries OBJECT-TYPE Indicates the number of valid entries that exist in the Access Control List Table. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.1 | Gauge | read-only | mandatory |
| nwAtAclTable OBJECT-TYPE This table contains the Access Control List information for theAppleTalk protocol. This table contains entries, each of which allows packet forwarding between source/destination pairs to be permitted or denied. The particular list is identified by the access control list ID. Each list may contain multiple entries ordered by sequence number. When a particular access control list is searched, it is searched in sequence number order and the first match found ends the search. If no match is found, access defaults to permitted. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2 | not-accessible | mandatory | |
| nwAtAclEntry OBJECT-TYPE Each entry contains AppleTalk source/destination access information. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1 | not-accessible | mandatory | |
| nwAtAclIdentifier OBJECT-TYPE This is the primary (major) index into the AppleTalk access control list table. Essentially, this identifies the access control list by a unique identifier (at least 1) and is arbitrarily assigned by the user. All entries that have the same ID belong to the same access control list. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1.1 | INTEGER | read-only | mandatory |
| nwAtAclSequence OBJECT-TYPE This is the secondary (minor) index into the AppleTalk access control list table. This number corresponds to a sequence number used to order multiple entries within the same access control list. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1.2 | INTEGER | read-only | mandatory |
| nwAtAclPermission OBJECT-TYPE Specifies whether access is allowed or denied between the source and destination address pairs. Note that source and destination are interchangeable when bi-directional control is selected. To remove an existing entry set invalid (2), and it will disappear after reboot. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1.3 | INTEGER {other(1), invalid(2), permit(3), deny(4), permit-bidirectional(5), deny-bidirectional(6)} | read-write | mandatory |
| nwAtAclMatches OBJECT-TYPE Indicates the number of matches on this entry that have resulted in the access restriction permit/deny being applied as part of the forwarding process. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1.4 | Counter | read-only | mandatory |
| nwAtAclDestZone OBJECT-TYPE Specifies the destination zone name used to compare for matches on the access control list. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1.5 | AtName | read-write | mandatory |
| nwAtAclSrcZone OBJECT-TYPE Specifies the source zone to be used to compare for matches on the access control list. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1.6 | AtName | read-write | mandatory |
| nwAtFilters OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.8 | |||
| nwAtRedirector OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.9 | |||
| nwAtEvent OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10 | |||
| nwAtEventLogConfig OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.1 | |||
| nwAtEventAdminSTATUS OBJECT-TYPE Sets the administrative state of AppleTalk event logging. Enabled (3) causes the event log to become active. Disabled (2) causes the event log to become inactive. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.1.1 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwAtEventMaxEntries OBJECT-TYPE Sets the maximum number of entries allowed in the event log table. When the number of entries reaches the value of nwAtEventMaxEntries the first (oldest) entry is deleted to allow a new entry to be added. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.1.2 | INTEGER | read-write | mandatory |
| nwAtEventTraceAll OBJECT-TYPE Enabled (3) allows logging of all event types on all router ports from all protocols and components. Disabled (2) causes the event log filter table to specify which events to log. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.1.3 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | mandatory |
| nwAtEventLogFilterTable OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2 | |||
| nwAtEventFilterTable OBJECT-TYPE This table contains an entry for each event filter configured for AppleTalk Routing Service's events. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1 | not-accessible | mandatory | |
| nwAtEventFilterEntry OBJECT-TYPE Each entry describes an event filter which defines a particular type of event to be logged to the event log. The value of nwIpEventProtocol indicates the value used in either the nwRtgProtocolTable or the nwComponentTable Cabletron Routing Services MIB, which indentifies the protocol to which the entry exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1 | not-accessible | mandatory | |
| nwAtEventFltrProtocol OBJECT-TYPE Indicates the value of the Cabletron Routing Services MIB nwRtgProtocolInstance or nwComponentRtgInstance, which identifies the protocol involved in the event for which the event filter exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1.1 | INTEGER | read-only | mandatory |
| nwAtEventFltrIfNum OBJECT-TYPE Specifies the router port involved in the event for which the event filter exists. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1.2 | INTEGER | read-only | mandatory |
| nwAtEventFltrControl OBJECT-TYPE Set this value to 3 to add the entry to the event log table. Set this value to 2 to remove the entry from the event filter table. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1.3 | INTEGER {other(1), delete(2), add(3)} | read-write | mandatory |
| nwAtEventFltrType OBJECT-TYPE This 6 bit mask specifies the types of events to be logged. By default all 6 bits are set to 1, indicating that all types of events are to be logged. Setting any bit to 0 removes an event type from this field and prevents that type of event from being logged. Setting any bit to 1 adds an event type to this field and enables that type of event to be logged. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1.4 | INTEGER {misc(1), timer(2), rcv(4), xmit(8), event(16), error(32)} | read-write | mandatory |
| nwAtEventFltrSeverity OBJECT-TYPE Specifies the level of severity an event must meet in order to be logged. Controls the amount of event logging by ignoring events of a lower priority than specified by this filter value. `Highmed' ignores only events of the lowest severity. `Highlow' logs all events highest priority through lowest. `Highest' severity causes all events except those of the highest severity to be ignored. `Highmed' severity is the default setting which causes only events of the lowest severity to be ignored. `Highlow' severity logs all events, regardless of severity. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1.5 | INTEGER {highest(1), highmed(2), highlow(3)} | read-write | mandatory |
| nwAtEventFltrAction OBJECT-TYPE Specifies how the events are to be logged. Logging to the `log' stores the events in the event log table (nwIpEventFltrAction). Logging to `trap' sends events out through the trap mechanism. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1.6 | INTEGER {log(1), trap(2), log-trap(3)} | read-write | mandatory |
| nwAtEventLogTable OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3 | |||
| nwAtEventTable OBJECT-TYPE This table contains an entry for each event that has been logged. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1 | not-accessible | mandatory | |
| nwAtEventEntry OBJECT-TYPE Each entry contains the information about an event that has been logged to the event table. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1 | not-accessible | mandatory | |
| nwAtEventNumber OBJECT-TYPE An ordinal value assigned to the event for which the log entry exists. nwAtEvnetNumber is assigned so that each event in the event log can be uniquely identified by the value of nwAtEventNumber. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1.1 | INTEGER | read-only | mandatory |
| nwAtEventTime OBJECT-TYPE Indicates the time at which the event was logged to the event log | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1.2 | TimeTicks | read-only | mandatory |
| nwAtEventType OBJECT-TYPE Indicates the type of event that was logged. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1.3 | INTEGER {misc(1), timer(2), rcv(4), xmit(8), event(16), error(32)} | read-only | mandatory |
| nwAtEventSeverity OBJECT-TYPE Indicates the severity that was assigned to this event. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1.4 | INTEGER {highest(1), highmed(2), highlow(3)} | read-only | mandatory |
| nwAtEventProtocol OBJECT-TYPE Indicates the value of the Cabletron Routing Services MIB nwRtgProtocolInstance or nwComponentInstance which identifies the protocol or component that was involved in the event. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1.5 | INTEGER | read-only | mandatory |
| nwAtEventIfNum OBJECT-TYPE Indicates the router port that was involved in the event. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1.6 | INTEGER | read-only | mandatory |
| nwAtEventTextString OBJECT-TYPE Contains the actual text string that was logged. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1.7 | OCTET STRING | read-only | mandatory |
| nwAtWorkGroup OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.11 | |||
| nwAtNetDiag OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12 | |||
| nwAtNetDiagPing OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.1 | |||
| nwAtNetDiagTelnet OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.2 | |||
| nwAtNetDiagOutbound OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3 | |||
| nwAtNetDiagOutboundNetAddress OBJECT-TYPE The AppleTalk Network Address of a node with which the diagnostic test will directly correspond. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.1 | AtDdpNodeAddress | read-write | mandatory |
| nwAtNetDiagOutboundPort OBJECT-TYPE An integer representing the port through which the diagnostic test will broadcast or multicast packets. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.2 | INTEGER | read-write | mandatory |
| nwAtNetDiagOutboundTimeout OBJECT-TYPE An integer representing the number of seconds before a diagnostic request will time out. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.3 | INTEGER | read-write | mandatory |
| nwAtNetDiagOutboundRetries OBJECT-TYPE An integer representing the number of times a request will be repeated before failure. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.4 | INTEGER | read-write | mandatory |
| nwAtNetDiagOutboundATEchoType OBJECT-TYPE The type of echo diagnostic function to initiate. Upon setting this to send EchoRequest (2), an echo request will be initiated and the value will be set to noAction (1). | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.5 | INTEGER {noAction(1), sendEchoRequest(2), other(3)} | read-write | mandatory |
| nwAtNetDiagOutboundATEchoStatus OBJECT-TYPE The current status of the echo diagnostic. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.6 | INTEGER {inactive(1), inProgress(2), timeout(3), success(4)} | read-write | mandatory |
| nwAtNetDiagOutboundNBPEntityObject OBJECT-TYPE The entity object or wildcard object used in the NBP lookup diagnostic. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.7 | AtName | read-write | mandatory |
| nwAtNetDiagOutboundNBPEntityType OBJECT-TYPE The entity type or wildcard type used in the NBP lookup diagnostic. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.8 | AtName | read-write | mandatory |
| nwAtNetDiagOutboundNBPEntityZone OBJECT-TYPE The entity zone used in the NBP lookup diagnostic. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.9 | AtName | read-write | mandatory |
| nwAtNetDiagOutboundNBPType OBJECT-TYPE Specifies the type of outbound NBP diagnostic function to initiate. Upon setting this value to any value other than noAction (1) or other (10), the corresponding request will be made and the value will be set to noAction (1). | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.10 | INTEGER {noAction(1), localRequest(2), lookupMcast(3), lookupBcast(4), lookupDirect(5), bcastRequestBcast(6), bcastRequestDirect(7), forwardRequestBcast(8), forwardRequestDirect(9), other(10)} | read-write | mandatory |
| nwAtNetDiagOutboundNBPStatus OBJECT-TYPE Indicates the current status of the outbound NBP diagnostic. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.11 | INTEGER {inactive(1), inProgress(2), done(3)} | read-write | mandatory |
| nwAtNetDiagOutboundRTMPType OBJECT-TYPE The type of outbound RTMP diagnostic function to initiate. Upon setting this value to a value other than noAction(1) or other(8), the corresponding request will be initiated and the value will be set to noAction(1). | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.12 | INTEGER {noAction(1), sendRequest(2), bcastRequest(3), sendRDRequestSplitHorizon(4), bcastRDRequestSplitHorizon(5), sendRDRequestFullTable(6), bcastRDRequestFullTable(7), other(8)} | read-write | mandatory |
| nwAtNetDiagOutboundRTMPStatus OBJECT-TYPE The current status of the outbound RTMP diagnostic. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.13 | INTEGER {inactive(1), inProgress(2), done(3)} | read-write | mandatory |
| nwAtNetDiagOutboundRTMPNetStart OBJECT-TYPE The start of the network range from the last successful outbound RTMP request or route data request. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.14 | AtNetworkNumber | read-write | mandatory |
| nwAtNetDiagOutboundRTMPNetEnd OBJECT-TYPE The end of the network range from the last successful outbound RTMP request or route data request. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.15 | AtNetworkNumber | read-write | mandatory |
| nwAtNetDiagOutboundZIPType OBJECT-TYPE The type of outbound ZIP diagnostic function to initiate. Upon setting this value to a value other than noAction(1) or other(8), the corresponding request will be initiated and the value will be set to noAction(1). | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.16 | INTEGER {noAction(1), sendQuery(2), bcastQuery(3), sendGetZonesList(4), sendGetLocalZones(5), sendGetMyZone(6), sendGetNetInfo(7), bcastGetNetInfo(8), other(9)} | read-write | mandatory |
| nwAtNetDiagOutboundZIPStatus OBJECT-TYPE The current status of the outbound ZIP diagnostic. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.17 | INTEGER {inactive(1), queryInProgress(2), atpInProgress(3), gniInProgress(4), done(5)} | read-write | mandatory |
| nwAtNetDiagOutboundZIPQueryNet OBJECT-TYPE The start of the network range to send ZIP query for. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.18 | AtNetworkNumber | read-write | mandatory |
| nwAtNetDiagOutboundZIPQueryZone OBJECT-TYPE The first zone from the last successful ZIP query. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.19 | AtName | read-write | mandatory |
| nwAtNetDiagOutboundZIPGetNetInfoZone OBJECT-TYPE The zone name to be used in a ZIP get-net-info request diagnostic. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.20 | AtName | read-write | mandatory |
| nwAtNetDiagOutboundZIPGetNetInfoNetStart OBJECT-TYPE The start of the network range from the last successful ZIP get-net-info request. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.21 | AtNetworkNumber | read-write | mandatory |
| nwAtNetDiagOutboundZIPGetNetInfoNetEnd OBJECT-TYPE The end of the network range from the last successful ZIP get-net-info request. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.22 | AtNetworkNumber | read-write | mandatory |
| nwAtNetDiagOutboundZIPGetNetInfoMulticast OBJECT-TYPE The data-link multicast address from the last successful ZIP get-net-info request. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.23 | OCTET STRING | read-write | mandatory |
| nwAtNetDiagOutboundZIPGetNetInfoDefaultZone OBJECT-TYPE The default zone name from the last successful ZIP get-net-info request. | 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.24 | AtName | read-write | mandatory |
| nwRtrExperimental OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.2.2.4 | |||
| nwAtportZoneTable OBJECT-TYPE The table of zone information for non-default zones on ports. | 1.3.6.1.4.1.52.4.2.2.2.4.1 | not-accessible | mandatory | |
| nwAtportZoneEntry OBJECT-TYPE An entry of zone information for a port. | 1.3.6.1.4.1.52.4.2.2.2.4.1.1 | not-accessible | mandatory | |
| nwAtportZonePort OBJECT-TYPE An integer representing the port to which this zone belongs. The port identified by a particular value of this object is the same port as identified by the same value of nwAtportIndex. | 1.3.6.1.4.1.52.4.2.2.2.4.1.1.1 | INTEGER | read-only | mandatory |
| nwAtportZoneName OBJECT-TYPE A zone name configured for the AppleTalk port referred to in the corresponding entry of nwAtportZonePort. When this value is changed in a router, the router must send a zipNotify packet on the associated network. | 1.3.6.1.4.1.52.4.2.2.2.4.1.1.2 | AtName | read-only | mandatory |
| nwAtportZoneStatus OBJECT-TYPE The status of this zone entry. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the nwAtportZoneTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant nwAtportZoneStatus object. | 1.3.6.1.4.1.52.4.2.2.2.4.1.1.3 | INTEGER {valid(1), invalid(2)} | read-write | mandatory |